Andy Polyakov [Tue, 28 Feb 2017 22:25:36 +0000 (23:25 +0100)]
bn/asm: clean up unused PA-RISC modules.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Tue, 28 Feb 2017 21:54:28 +0000 (22:54 +0100)]
des/des_locl.h: clean up unused/irrelevant macros.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Jon Spillett [Thu, 2 Mar 2017 02:54:06 +0000 (12:54 +1000)]
Check for zero records and return immediately
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2822)
Andy Polyakov [Wed, 1 Mar 2017 13:33:34 +0000 (14:33 +0100)]
appveyor.yml: streamline pull requests.
For pull requests not tagged with [extended tests]:
- short-curcuit most expensive fuzz and install tests;
- skip over non-shared builds;
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2810)
Andy Polyakov [Wed, 1 Mar 2017 13:32:25 +0000 (14:32 +0100)]
Configurations/50-masm.conf: add /nologo to ml64 command line.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2810)
Richard Levitte [Wed, 1 Mar 2017 22:43:03 +0000 (23:43 +0100)]
Add NOTES.UNIX, with a description on how to deal with runpaths
[skip ci]
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2818)
Bernd Edlinger [Tue, 21 Feb 2017 05:58:04 +0000 (06:58 +0100)]
Check that async_jobs is not negative and not too high.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2693)
Andy [Wed, 1 Mar 2017 01:07:01 +0000 (01:07 +0000)]
Code health: ssl/ssl_locl.h unused macros
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2806)
Richard Levitte [Wed, 1 Mar 2017 09:33:20 +0000 (10:33 +0100)]
VMS: compensate for gmtime_r() parameter pointer size
With VMS C, the second parameter takes a 32-bit pointer. When
building with 64-bit pointer size default, we must compensate.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2811)
Richard Levitte [Wed, 1 Mar 2017 09:48:34 +0000 (10:48 +0100)]
Don't use deprecated EVP_CIPHER_CTX_cleanup() internally
Use EVP_CIPHER_CTX_reset() instead
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2812)
Emilia Kasper [Tue, 28 Feb 2017 13:13:40 +0000 (14:13 +0100)]
Remove some obsolete/obscure internal define switches:
- FLAT_INC
- PKCS1_CHECK (the SSL_OP_PKCS1_CHECK options have been
no-oped)
- PKCS_TESTVECT (debugging leftovers)
- SSL_AD_MISSING_SRP_USERNAME (unfinished feature)
- DTLS_AD_MISSING_HANDSHAKE_MESSAGE (unfinished feature)
- USE_OBJ_MAC (note this removes a define from the public header but
very unlikely someone would be depending on it)
- SSL_FORBID_ENULL
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Benjamin Kaduk [Tue, 28 Feb 2017 22:32:51 +0000 (16:32 -0600)]
Remove OPENSSL_indirect_call()
It's undocumented and unused in the tree. The idea seems to have
never gained much traction, and can be removed without breaking
ABI compatibility.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2800)
Benjamin Kaduk [Tue, 28 Feb 2017 22:09:53 +0000 (16:09 -0600)]
Don't free in cleanup routine
Cleanse instead, and free in the free routine.
Seems to have been introduced in commit
846ec07d904f9cc81d486db0db14fb84f61ff6e5 when EVP_CIPHER_CTX was made
opaque.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2798)
Andy Polyakov [Tue, 28 Feb 2017 13:15:30 +0000 (14:15 +0100)]
crypto/des: remove unreferenced rcp_enc.c module.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>
Richard Levitte [Tue, 28 Feb 2017 17:24:02 +0000 (18:24 +0100)]
Code health: Remove base address setting for mingw
Base address setting was done for the sake of FIPS. Since FIPS references
have been removed, we clean away this one as well.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2791)
Bernd Edlinger [Tue, 28 Feb 2017 08:48:32 +0000 (09:48 +0100)]
Fix handling of EVP_PKEY_CTRL_PKCS7_ENCRYPT/DECRYPT with OPENSSL_NO_CMS.
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2764)
Benjamin Kaduk [Thu, 23 Feb 2017 22:22:10 +0000 (16:22 -0600)]
Add AGL's "beer mug" PEM file as another test input
AGL has a history of pointing out the idiosynchronies/laxness of the
openssl PEM parser in amusing ways. If we want this functionality to
stay present, we should test that it works.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
Benjamin Kaduk [Thu, 23 Feb 2017 20:28:32 +0000 (14:28 -0600)]
Add test corpus for PEM reading
Generate a fresh certificate and DSA private key in their respective PEM
files. Modify the resulting ASCII in various ways so as to produce input
files that might be generated by non-openssl programs (openssl always
generates "standard" PEM files, with base64 data in 64-character lines
except for a possible shorter last line).
Exercise various combinations of line lengths, leading/trailing
whitespace, non-base64 characters, comments, and padding, for both
unencrypted and encrypted files. (We do not have any other test coverage
that uses encrypted files, as far as I can see, and the parser enforces
different rules for the body of encrypted files.)
Add a recipe to parse these test files and verify that they contain the
expected string or are rejected, according to the expected status.
Some of the current behavior is perhaps suboptimal and could be revisited.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2756)
Richard Levitte [Tue, 28 Feb 2017 16:36:02 +0000 (17:36 +0100)]
Code health: Quick note in changes and the OPENSSL_GLOBAL et al changes
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2785)
Richard Levitte [Tue, 28 Feb 2017 16:27:20 +0000 (17:27 +0100)]
Code health: With the VAX C-ism gone, OPENSSL_GLOBAL can be removed too
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2785)
Richard Levitte [Tue, 28 Feb 2017 15:43:09 +0000 (16:43 +0100)]
Code health: Remove another VAX C-ism, globaldef and globalref
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2785)
Richard Levitte [Tue, 28 Feb 2017 19:00:56 +0000 (20:00 +0100)]
Code health: make update
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2793)
Richard Levitte [Tue, 28 Feb 2017 19:00:42 +0000 (20:00 +0100)]
Code health: Remove VAX exceptions in util/mkdef.pl
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2793)
Richard Levitte [Tue, 28 Feb 2017 18:57:33 +0000 (19:57 +0100)]
Code health: Remove unused VAX transfer vector for engines
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2793)
Rich Salz [Tue, 28 Feb 2017 15:53:28 +0000 (10:53 -0500)]
Exdata test was never enabled.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2787)
Emilia Kasper [Tue, 28 Feb 2017 17:12:25 +0000 (18:12 +0100)]
Remove memcpy unrolling in bn_lib.c
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Emilia Kasper [Tue, 28 Feb 2017 15:53:35 +0000 (16:53 +0100)]
Remove support for HMAC_TEST_PRIVATE_KEY_FORMAT
This is a bogus, undocumented format that was intended for testing; I
don't think anyone is using it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Rich Salz [Tue, 28 Feb 2017 17:08:54 +0000 (12:08 -0500)]
Remove GENCB_TEST compile flag
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2790)
Matt Caswell [Tue, 28 Feb 2017 15:53:55 +0000 (15:53 +0000)]
Fix test_ssl_new when compiled with no-tls1_2 or no-dtls1_2
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2788)
Matt Caswell [Tue, 28 Feb 2017 15:53:35 +0000 (15:53 +0000)]
Fix sslapitest when compiled with no-tls1_2
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2788)
Dr. Stephen Henson [Tue, 28 Feb 2017 15:58:46 +0000 (15:58 +0000)]
Revert rc4test removal, it performs additional tests not in evptests.txt
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2789)
Matt Caswell [Tue, 28 Feb 2017 12:47:42 +0000 (12:47 +0000)]
Remove some commented out code in the tests
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2774)
Matt Caswell [Tue, 28 Feb 2017 12:47:22 +0000 (12:47 +0000)]
Remove some commented out code in libssl
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2774)
Matt Caswell [Tue, 28 Feb 2017 14:55:35 +0000 (14:55 +0000)]
Remove some commented out code in libcrypto
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2774)
Matt Caswell [Tue, 28 Feb 2017 12:46:56 +0000 (12:46 +0000)]
Remove some commented out code in the apps
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2774)
Dr. Stephen Henson [Tue, 28 Feb 2017 15:11:48 +0000 (15:11 +0000)]
Remove more redundant tests: md4, md5, rmd, rc4, p5_crpt2
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2784)
Matt Caswell [Tue, 28 Feb 2017 15:14:04 +0000 (15:14 +0000)]
Remove a pointless "#ifndef" from bf_enc.c
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2778)
Matt Caswell [Tue, 28 Feb 2017 13:31:41 +0000 (13:31 +0000)]
Remove bf_cbc.c
It is never built and the code is duplicated in bf_enc.c.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2778)
Rich Salz [Mon, 27 Feb 2017 17:36:37 +0000 (12:36 -0500)]
Update year, wording tweak
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2755)
Matt Caswell [Tue, 28 Feb 2017 13:23:37 +0000 (13:23 +0000)]
Remove the file r160test.c
It is empty and is not compiled
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2777)
Dr. Stephen Henson [Tue, 28 Feb 2017 14:18:27 +0000 (14:18 +0000)]
Remove wp_test.c: exactly the same tests are in evptests.txt
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2783)
Matt Caswell [Tue, 28 Feb 2017 10:08:51 +0000 (10:08 +0000)]
Remove dead code in bn
There are a number of symbols in bn which are internal only and never used
by anything. They should be removed.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2766)
Todd Short [Tue, 28 Feb 2017 14:04:29 +0000 (09:04 -0500)]
Remove some #if 0 code in ssl, crypto/bio
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2781)
Richard Levitte [Tue, 28 Feb 2017 13:07:08 +0000 (14:07 +0100)]
Code health: Stop using timeb.h / ftime() (VMS only)
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2775)
Richard Levitte [Tue, 28 Feb 2017 13:06:14 +0000 (14:06 +0100)]
Code health: Remove obvious VAX C fixups
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2775)
Emilia Kasper [Tue, 28 Feb 2017 13:54:07 +0000 (14:54 +0100)]
More Configure cleanup. Remove
- util/incore
- util/fipslink.pl
- the unused "baseaddr" configure switch
Reviewed-by: Stephen Henson <steve@openssl.org>
Emilia Kasper [Tue, 28 Feb 2017 11:30:28 +0000 (12:30 +0100)]
Clean up references to FIPS
This removes the fips configure option. This option is broken as the
required FIPS code is not available.
FIPS_mode() and FIPS_mode_set() are retained for compatibility, but
FIPS_mode() always returns 0, and FIPS_mode_set() can only be used to
turn FIPS mode off.
Reviewed-by: Stephen Henson <steve@openssl.org>
Emilia Kasper [Tue, 28 Feb 2017 12:25:06 +0000 (13:25 +0100)]
Remove BN_DEBUG_TRIX
Reviewed-by: Rich Salz <rsalz@openssl.org>
Emilia Kasper [Tue, 28 Feb 2017 10:47:10 +0000 (11:47 +0100)]
Remove debugging leftovers in apps/opt.c
Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Pauli [Mon, 27 Feb 2017 04:26:16 +0000 (14:26 +1000)]
Avoid buffer underflow in evp_test.
The second loop in the remove_space function doesn't check for walking
back off of the start of the string while setting white space to 0.
This fix exits this loop once the pointer is before the (updated) beginning
of the string.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2752)
Bernd Edlinger [Mon, 13 Feb 2017 12:21:34 +0000 (13:21 +0100)]
Remove unnecessary memset after PR #2583 avoids accessing
the uninitialized session_id now.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2608)
Richard Levitte [Tue, 28 Feb 2017 13:47:55 +0000 (14:47 +0100)]
Move the CHIL engine to demos/engines
Moving out of the way, Makefile to be added
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2780)
Matt Caswell [Tue, 28 Feb 2017 10:52:09 +0000 (10:52 +0000)]
Remove some dead code from libssl
There are a small number of functions in libssl that are internal only
and never used by anything.
Reviewed-by: Emilia Käsper <emilia@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2770)
Richard Levitte [Tue, 28 Feb 2017 07:15:31 +0000 (08:15 +0100)]
Code cleanup: remove the VMS specific reimplementation of gmtime
This reimplementation was necessary before VMS C V7.1. Since that's
the minimum version we support in this OpenSSL version, the
reimplementation is no longer needed.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2762)
Emilia Kasper [Tue, 28 Feb 2017 10:37:22 +0000 (11:37 +0100)]
Remove dead code in crypto/pkcs7
Reviewed-by: Stephen Henson <steve@openssl.org>
Emilia Kasper [Tue, 28 Feb 2017 10:33:38 +0000 (11:33 +0100)]
Remove methtest.c
This file tests code that doesn't exist.
Reviewed-by: Stephen Henson <steve@openssl.org>
Dr. Stephen Henson [Tue, 28 Feb 2017 05:17:11 +0000 (05:17 +0000)]
Remove ancient demoCA directory
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2760)
Richard Levitte [Mon, 27 Feb 2017 22:34:29 +0000 (23:34 +0100)]
Renumber to avoid a error code clash
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2758)
Dr. Stephen Henson [Wed, 22 Feb 2017 17:26:04 +0000 (17:26 +0000)]
Trace support for TLS 1.3 certificate request message
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2728)
Dr. Stephen Henson [Wed, 22 Feb 2017 17:26:44 +0000 (17:26 +0000)]
Initial incomplete TLS 1.3 certificate request support.
This adds partial support for TLS 1.3 certificate request message.
The request context and extensions are currently ignored on receive
and set to zero length on send.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2728)
Adrian Vollmer [Mon, 27 Feb 2017 14:51:21 +0000 (15:51 +0100)]
Adjust the default value of the private key size
...in the man page to reflect the actual default (2048 instead of 512)
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2754)
Andy Polyakov [Sat, 25 Feb 2017 17:37:24 +0000 (18:37 +0100)]
poly1305/asm/poly1305-x86_64.pl: minor AVX512 optimization.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sat, 25 Feb 2017 21:17:21 +0000 (22:17 +0100)]
crypto/x86_64cpuid.pl: add CFI annotations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sat, 25 Feb 2017 21:16:57 +0000 (22:16 +0100)]
whrlpool/asm/wp-x86_64.pl: add CFI annotations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sat, 25 Feb 2017 21:16:38 +0000 (22:16 +0100)]
camellia/asm/cmll-x86_64.pl: add CFI annotations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sat, 25 Feb 2017 18:37:02 +0000 (19:37 +0100)]
poly1305/asm/poly1305-x86_64.pl: add CFI annotations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sat, 25 Feb 2017 18:36:43 +0000 (19:36 +0100)]
chacha/asm/chacha-x86_64.pl: add CFI annotations.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Dr. Stephen Henson [Sun, 26 Feb 2017 16:04:31 +0000 (16:04 +0000)]
Add missing blank lines and cosmetic improvements
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Dr. Stephen Henson [Sun, 26 Feb 2017 13:40:03 +0000 (13:40 +0000)]
TLS 1.3 support for ssl_print_ticket()
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Dr. Stephen Henson [Sun, 26 Feb 2017 03:14:53 +0000 (03:14 +0000)]
print out alpn extension
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Dr. Stephen Henson [Sun, 26 Feb 2017 01:16:30 +0000 (01:16 +0000)]
Add ffdhe groups to trace output
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Dr. Stephen Henson [Wed, 22 Feb 2017 17:25:17 +0000 (17:25 +0000)]
Print numerical value of named roups
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Dr. Stephen Henson [Wed, 22 Feb 2017 17:24:42 +0000 (17:24 +0000)]
Add entry for PSK extension
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Dr. Stephen Henson [Wed, 22 Feb 2017 17:24:18 +0000 (17:24 +0000)]
Add trace entries for remaining TLS 1.3 ciphersuites
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Dr. Stephen Henson [Tue, 21 Feb 2017 18:43:46 +0000 (18:43 +0000)]
Print signature type to out, not bio_err
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2747)
Richard Levitte [Sat, 25 Feb 2017 23:17:43 +0000 (00:17 +0100)]
Add a null UI method
There are cases when, if you pass a NULL UI_METHOD, the called
function will use an internal default. This is well and good, but
there may be cases when this is undesirable and one would rather send
in a UI that does absolutely nothing (sort of a /dev/null). UI_null()
is the UI_METHOD for this purpose.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2744)
Andy Polyakov [Thu, 29 Dec 2016 23:00:16 +0000 (00:00 +0100)]
poly1305/asm/poly1305-x86_64.pl: add VPMADD52 code path.
This is initial and minimal single-block implementation.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sun, 25 Dec 2016 12:10:00 +0000 (13:10 +0100)]
poly1305/asm/poly1305-x86_64.pl: switch to vpermdd in table expansion.
Effectively it's minor size optimization, 5-6% per affected subroutine.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sun, 25 Dec 2016 12:05:35 +0000 (13:05 +0100)]
poly1305/asm/poly1305-x86_64.pl: optimize AVX512 code path.
On pre-Skylake best optimization strategy was balancing port-specific
instructions, while on Skylake minimizing the sheer amount appears
more sensible.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Dr. Stephen Henson [Sat, 25 Feb 2017 00:40:55 +0000 (00:40 +0000)]
Add tests for SHA1 and EC point compression
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2739)
Dr. Stephen Henson [Sat, 25 Feb 2017 00:25:04 +0000 (00:25 +0000)]
For TLS 1.3 reject SHA1 TLS signatures
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2739)
Dr. Stephen Henson [Fri, 24 Feb 2017 20:43:02 +0000 (20:43 +0000)]
Reject compressed point format with TLS 1.3
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2739)
Dr. Stephen Henson [Fri, 24 Feb 2017 17:29:59 +0000 (17:29 +0000)]
EC certificate with compression point
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2739)
Dr. Stephen Henson [Fri, 24 Feb 2017 16:39:57 +0000 (16:39 +0000)]
Add SuiteB support to tls_choose_sigalg()
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2738)
Dr. Stephen Henson [Fri, 24 Feb 2017 15:47:54 +0000 (15:47 +0000)]
Add Suite B tests
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2738)
Dr. Stephen Henson [Sat, 18 Feb 2017 13:38:37 +0000 (13:38 +0000)]
Add P-384 root and P-384, P-256 EE certificates.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2738)
Emilia Kasper [Fri, 17 Feb 2017 18:00:15 +0000 (19:00 +0100)]
X509 time: tighten validation per RFC 5280
- Reject fractional seconds
- Reject offsets
- Check that the date/time digits are in valid range.
- Add documentation for X509_cmp_time
GH issue 2620
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Mon, 6 Feb 2017 10:14:05 +0000 (11:14 +0100)]
.travis.yml: introduce concept of "extended tests"
Since CI is engaged on per merge request basis, it can be wasteful to
run each request through all the tests, especially those resource
consuming. Idea is to mark most of tests as "extended" and provide a
way to opt-in by marking last commit with [extended tests] tag. It's
still not as optimal as one could wish, as decision to skip a test
still requires machine time, and it's taken in configured environment,
i.e. with updates and additional packages installed...
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2292)
Andy Polyakov [Thu, 26 Jan 2017 00:02:43 +0000 (01:02 +0100)]
.travis.yml: make package pulls conditional.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2292)
Bernd Edlinger [Thu, 23 Feb 2017 13:52:23 +0000 (14:52 +0100)]
Add -Wundef to --strict-warnings options.
Avoid a -Wundef warning in refcount.h
Avoid a -Wundef warning in o_str.c
Avoid a -Wundef warning in testutil.h
Include internal/cryptlib.h before openssl/stack.h
to avoid use of undefined symbol OPENSSL_API_COMPAT.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2712)
Dr. Stephen Henson [Thu, 23 Feb 2017 22:12:28 +0000 (22:12 +0000)]
Tidy up certificate type handling.
The certificate types used to be held in a fixed length array or (if
it was too long) a malloced buffer. This was done to retain binary
compatibility. The code can be simplified now SSL is opaque by always
using a malloced buffer.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2733)
Pauli [Thu, 23 Feb 2017 03:46:01 +0000 (13:46 +1000)]
Increase the size of the stack buffer to prevent an overflow.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2721)
Todd Short [Fri, 17 Feb 2017 16:36:13 +0000 (11:36 -0500)]
Fix potential memory leak in ASN1_TIME_to_generalizedtime()
If ret is allocated, it may be leaked on error.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2666)
Kurt Roeckx [Thu, 23 Feb 2017 22:10:01 +0000 (23:10 +0100)]
Fix duplicate error codes
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #2732
Kurt Roeckx [Sat, 19 Nov 2016 19:15:35 +0000 (20:15 +0100)]
Implement SSL_read_ex() and SSL_write_ex() as documented.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #1964
Benjamin Kaduk [Mon, 13 Feb 2017 18:42:43 +0000 (12:42 -0600)]
Add an sslapitest for early callback
Make sure that we can stop handshake processing and resume it later.
Also check that the cipher list and compression methods are sane.
Unfortunately, we don't have the client-side APIs needed to force
a specific (known) session ID to be sent in the ClientHello, so
that accessor cannot be tested here.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Benjamin Kaduk [Mon, 13 Feb 2017 21:10:54 +0000 (15:10 -0600)]
Let test handshakes stop on certain errors
Certain callback APIs allow the callback to request async processing
by trickling a particular error value up the stack to the application
as an error return from the handshake function. In those cases,
SSL_want() returns a code specific to the type of async processing
needed.
The create_ssl_connection() helper function for the tests is very
helpful for several things, including creating API tests. However,
it does not currently let us test the async processing functionality
of these callback interfaces, because the special SSL error codes
are treated as generic errors and the helper continues to loop until
it reaches its maximum iteration count.
Add a new parameter, 'want', that indicates an expected/desired
special SSL error code, so that the helper will terminate when
either side reports that error, giving control back to the calling
function and allowing the test to proceed.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Benjamin Kaduk [Mon, 13 Feb 2017 20:14:06 +0000 (14:14 -0600)]
Use correct variable in test diagnostic
create_ssl_connection() prints out the results if SSL_accept() and/or
SSL_connect() fail, but was reusing the client return value when printing
about SSL_accept() failures.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Benjamin Kaduk [Thu, 9 Feb 2017 23:21:42 +0000 (17:21 -0600)]
Adopt test to changed behavior
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)
Benjamin Kaduk [Tue, 31 Jan 2017 22:06:30 +0000 (16:06 -0600)]
Tests for SSL early callback
Plumb things through in the same place as the SNI callback, since
we recommend that the early callback replace (and supplement) the
SNI callback, and add a few test cases.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2279)