Use common digest getter for PBKDF2

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

Use common digest getter for HKDF

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

Use common define for properties, engine, cipher and digest params

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

Add 'engine' param to KDFs

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

KMAC using common digest get code

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

HMAC using common digest get code

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

GMAC using common cipher get code

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

CMAC using common cipher get code

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

Unify the digest getting code inside providers.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9770)

[ec/ecp_nistp*.c] restyle: use {} around `else` too

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9511)

[ec/ecp_nistp*.c] remove flip_endian()

Replace flip_endian() by using the little endian specific
BN_bn2lebinpad() and BN_lebin2bn().

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9511)

Uniform BN_bn2binpad() and BN_bn2lebinpad() implementations

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9511)

Make BN_num_bits() consttime upon BN_FLG_CONSTTIME

This issue was partially addressed by commit
972c87dfc7e765bd28a4964519c362f0d3a58ca4, which hardened its callee
BN_num_bits_word() to avoid leaking the most-significant word of its
argument via branching and memory access pattern.
The commit message also reported:
> There are a few places where BN_num_bits is called on an input where
> the bit length is also secret. This does *not* fully resolve those
> cases as we still only look at the top word.

BN_num_bits() is called directly or indirectly (e.g., through
BN_num_bytes() or BN_bn2binpad() ) in various parts of the `crypto/ec`
code, notably in all the currently supported implementations of scalar
multiplication (in the generic path through ec_scalar_mul_ladder() as
well as in dedicated methods like ecp_nistp{224,256,521}.c and
ecp_nistz256.c).

Under the right conditions, a motivated SCA attacker could retrieve the
secret bitlength of a secret nonce through this vulnerability,
potentially leading, ultimately, to recover a long-term secret key.

With this commit, exclusively for BIGNUMs that are flagged with
BN_FLG_CONSTTIME, instead of accessing only bn->top, all the limbs of
the BIGNUM are accessed up to bn->dmax and bitwise masking is used to
avoid branching.

Memory access pattern still leaks bn->dmax, the size of the lazily
allocated buffer for representing the BIGNUM, which is inevitable with
the current BIGNUM architecture: reading past bn->dmax would be an
out-of-bound read.
As such, it's the caller responsibility to ensure that bn->dmax does not
leak secret information, by explicitly expanding the internal BIGNUM
buffer to a public value sufficient to avoid any lazy reallocation
while manipulating it: this should be already done at the top level
alongside setting the BN_FLG_CONSTTIME.

Thanks to David Schrammel and Samuel Weiser for reporting this issue
through responsible disclosure.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9511)

Fix a SCA leak using BN_bn2bin()

BN_bn2bin() is not constant-time and leaks the number of bits in the
processed BIGNUM.

The specialized methods in ecp_nistp224.c, ecp_nistp256.c and
ecp_nistp521.c internally used BN_bn2bin() to convert scalars into the
internal fixed length representation.

This can leak during ECDSA/ECDH key generation or handling the nonce
while generating an ECDSA signature, when using these implementations.
The amount and risk of leaked information useful for a SCA attack
varies for each of the three curves, as it depends mainly on the
ratio between the bitlength of the curve subgroup order (governing the
size of the secret nonce/key) and the limb size for the internal BIGNUM
representation (which depends on the compilation target architecture).

To fix this, we replace BN_bn2bin() with BN_bn2binpad(), bounding the
output length to the width of the internal representation buffer: this
length is public.

Internally the final implementation of both BN_bn2binpad() and
BN_bn2bin() already has masking in place to avoid leaking bn->top
through memory access patterns.
Memory access pattern still leaks bn->dmax, the size of the lazily
allocated buffer for representing the BIGNUM, which is inevitable with
the current BIGNUM architecture: reading past bn->dmax would be an
out-of-bound read.
As such, it's the caller responsibility to ensure that bn->dmax does not
leak secret information, by explicitly expanding the internal BIGNUM
buffer to a public value sufficient to avoid any lazy reallocation
while manipulating it: this is already done at the top level alongside
setting the BN_FLG_CONSTTIME.

Finally, the internal implementation of BN_bn2binpad() indirectly calls
BN_num_bits() via BN_num_bytes(): the current implementation of
BN_num_bits() can leak information to a SCA attacker, and is addressed
in the next commit.

Thanks to David Schrammel and Samuel Weiser for reporting this issue
through responsible disclosure.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9511)

Fix a SCA leak in BN_generate_dsa_nonce

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/9782)

[crypto/rsa] Set the constant-time flag in multi-prime RSA too

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9779)

[crypto/asn1] Fix multiple SCA vulnerabilities during RSA key validation.

This commit addresses multiple side-channel vulnerabilities present
during RSA key validation.
Private key parameters are re-computed using variable-time functions.

This issue was discovered and reported by the NISEC group at TAU Finland.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9779)

libcrypto.num entries for KDFs

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Move OSSL_OP_KDF into its rightful place amongst the other OSSL_OP_ definitions

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Remove reference to legacy aliases for MAC and KDF

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Clear collected_seed after freeing it

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Lowercase command line 'N' argument since params have lower case names

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Update KDF documentation (section 3)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Update KDF documentation (section 1)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Update KDF documentation (section 7)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Deal with BUF_MEM_grow ambiguity

BUF_MEM_grow() returns the passed length, but also zero on error.  If
the passed length was zero, an extra check to see if a returned zero
was an error or not is needed.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9662)

crypto/evp/pkey_kdf.c: further special treatment of "seed" and "info"

pkey_kdf_ctrl_str() has to do the same kind of special treatment as
pkey_kdf_ctrl() does.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9662)

More KDF cleanup

The EVP_KDF_ definitions are no longer needed, and neither is
EVP_get_kdfbyname()

test/evp_kdf_test.c tried to use a EVP_get_kdfbyname() that was rewritten
to use EVP_KDF_fetch() without ever freeing the resulting KDF method.
It's better to refactor the test to use EVP_KDF_fetch directly.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9662)

PBKDF2 implementation: refactor to avoid memleak

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9662)

Fix memleaks in KDF implementations

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9662)

crypto/evp/pkey_kdf.c: Redo parameter processing

Undo the caching scheme, pass through most controls as parameters, except
for SEED and INFO, where we keep supporting adding data through additional
ctrl calls by collecting the data, and only passing it to the EVP_KDF
before calling its derive function.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9662)

crypto/evp/kdf_meth.c: Add the reset function to the method

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9662)

Update private.num for KDFs/PRFs

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

ossl_provider_library_context(NULL) returns NULL.

This will only be required until everything is moved to providers and a NULL
provider pointer won't be possible.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Params from text to allow zero length value fields

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Update EVP test data for KDFs and PRFs.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

KDF error codes reworked

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Cleanse KDF missing crypto files

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Cleanse KDF error files

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Cleanse crypto/kdf directory

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

KDF/PRF updates to libcrypto

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

App updates for KDF provider conversion.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

KDF provider conversion error updates - generated

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

KDF additons to names and numbers

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Test updates in light of the KDF switchover

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Documentation updates in light of the KDF conversion

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Add KDFs to providers

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Fix users of KDFs to use params not ctls

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Remove old KDF initialisation

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Fix TLS/SSL PRF usages.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Move KDFs to the provider.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9662)

Teach TLSProxy how to parse CertificateRequest messages

We also use this in test_tls13messages to check that the extensions we
expect to see in a CertificateRequest are there.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9780)

Don't send a status_request extension in a CertificateRequest message

If a TLSv1.3 server configured to respond to the status_request extension
also attempted to send a CertificateRequest then it was incorrectly
inserting a non zero length status_request extension into that message.

The TLSv1.3 RFC does allow that extension in that message but it must
always be zero length.

In fact we should not be sending the extension at all in that message
because we don't support it.

Fixes #9767

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9780)

Undeprecate OpenSSL_version_num and OPENSSL_VERSION_NUMBER

The OpenSSL_version_num() function returns at runtime the
OPENSSL_VERSION_NUMBER of the compiled OpenSSL library.  This is a
used and useful interface, and should not (at least yet) be
deprecated, we just introduced the new versioning schema, it seems
too early to deprecate the old.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7853)

Reverting check to correct

Fixes #9773.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9776)

Disallow change EVP_CIPHER properties once set

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9764)

Disallow change EVP_MD properties once set

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9764)

[test] computing ECC cofactors: regression test

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9827)

[crypto/ec] for ECC parameters with NULL or zero cofactor, compute it

The cofactor argument to EC_GROUP_set_generator is optional, and SCA mitigations for ECC currently use it. So the library currently falls back to very old SCA-vulnerable code if the cofactor is not present.

This PR allows EC_GROUP_set_generator to compute the cofactor for all curves of cryptographic interest. Steering scalar multiplication to more SCA-robust code.

This issue affects persisted private keys in explicit parameter form, where the (optional) cofactor field is zero or absent.

It also affects curves not built-in to the library, but constructed programatically with explicit parameters, then calling EC_GROUP_set_generator with a nonsensical value (NULL, zero).

The very old scalar multiplication code is known to be vulnerable to local uarch attacks, outside of the OpenSSL threat model. New results suggest the code path is also vulnerable to traditional wall clock timing attacks.

CVE-2019-1547

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9827)

Make failed messages easier to find

Now that we use travis_terminate, we can make the status messages
simpler to find, and we don't need the "OK" output.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9707)

Fix error handling in x509_lu.c

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9639)

Cleanup includes in rand_unix.c

Fixes #9757

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9761)

Change provider params from int to size_t

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9699)

Handle the renamed command POD files in find-doc-nits

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9729)

Move libapps.a source to apps/lib

This makes it clearer what's what.  The 'openssl' application and its
sub-commands remain in apps/

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9723)

Suppress 'No server certificate CA names sent' message

Fixes #9080

Signed-off-by: Billy Brawner <billy@wbrawner.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/9710)

OSSL_PARAM_construct_utf8_string computes the string length.

If the passed string length is zero, the function computes the string length
from the passed string.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9760)

New function EVP_CIPHER_free()

This function re-implements EVP_CIPHER_meth_free(), but has a name that
isn't encumbered by legacy EVP_CIPHER construction functionality.

We also refactor most of EVP_CIPHER_meth_new() into an internal
evp_cipher_new() that's used when creating fetched methods.

EVP_CIPHER_meth_new() and EVP_CIPHER_meth_free() are rewritten in terms of
evp_cipher_new() and EVP_CIPHER_free().  This means that at any time, we can
deprecate all the EVP_CIPHER_meth_ functions with no harmful consequence.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9758)

New function EVP_MD_free()

This function re-implements EVP_MD_meth_free(), but has a name that
isn't encumbered by legacy EVP_MD construction functionality.

We also refactor most of EVP_MD_meth_new() into an internal
evp_md_new() that's used when creating fetched methods.

EVP_MD_meth_new() and EVP_MD_meth_free() are rewritten in terms of
evp_md_new() and EVP_MD_free().  This means that at any time, we can
deprecate all the EVP_MD_meth_ functions with no harmful consequence.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9758)

test/errtest.c: more conditions for checking __FILE__ and __LINE__

When at least one of OPENSSL_NO_ERR or OPENSSL_NO_FILENAMES is
defined, __FILE__ and __LINE__ are not saved with the error record.
This test only checked OPENSSL_NO_FILENAMES.  Now fixed.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9755)

Refactor how KEYMGMT methods get associated with other methods

KEYMGMT methods were attached to other methods after those were fully
created and registered, thereby creating a potential data race, if two
threads tried to create the exact same method at the same time.

Instead of this, we change the method creating function to take an
extra data parameter, passed all the way from the public fetching
function.  In the case of EVP_KEYEXCH, we pass all the necessary data
that evp_keyexch_from_dispatch() needs to be able to fetch the
appropriate KEYMGMT method on the fly.

Fixes #9592

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9678)

Fix Coverity 1453452: Control flow issues (DEADCODE)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9749)

Add CPU info to the speed command summary

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9669)

Diverse ERR fixes

1.  There are still references to the removed ERR_put_func_error().
2.  ERR_put_error() is deprecated as off version 3.0, so should
    ERR_PUT_error().
3.  'no-err' didn't affect what was passed to ERR_set_debug().

Fixes #9522

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9747)

Rework the documentation of our individual MAC implementations

We now describe parameters instead of controls.

Also, since macros like EVP_MAC_CMAC do not exist any more, we rename
the pod files from EVP_MAC_{algo}.pod to EVP_MAC-{algo}.pod.  This
allows getting the documentation like this:

    man EVP_MAC CMAC

[skip ci]
Fixes #9709

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9713)

Fix function name typo in MAC documentation.

A spurious CTX crept into one of the function names.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9750)

Remove extern declarations of OPENSSL_ia32cap_P

Use the header file internal/cryptlib.h instead.
Remove checks for OPENSSL_NO_ASM and I386_ONLY
in cryptlib.c, to match the checks in other
places where OPENSSL_ia32cap_P is used and
assumed to be initialized.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/9688)

Fix platform specific issues with provider ciphers

s390_aes naming issues with ofb128 and cfb128
Solaris missing include for camellia.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9702)

Fix pkeyutl -verifyrecover

When performing a pkeyutl -verifyrecover operation the input file is not
a hash - it is the signature itself. Therefore don't do the check to make
sure it looks like a hash.

Fixes #9658

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9731)

Don't include the DEVRANDOM being seeded logic on Android.

It lacks exposure of the `shm*` functions and should prefer the GETRANDOM
source.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/9735)

Fix NITs in comments and CHANGES for DEVRANDOM seeded check.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/9734)

fix ERR_add_error_vdata() for use with multiple args/calls

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9558)

Use ENGINE_get_id() instead of ENGINE_get_name()

ENGINE_get_name() actually returns more of a long description of the
engine, whilst ENGINE_get_id() returns a shorter id.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9720)

Fix no-engine

Make sure references to ENGINE functions are appropriately guarded.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9720)

Fix no-cmac

Don't include files that we don't want to build

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9718)

Fix no-poly1305, no-siphash and no-blake2

Make sure we don't include files that we don't need if we've disabled
them.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9717)

Fix a documentation bug in ec.h

The EC_GROUP_new() function does not take a libctx parameter

Reviewed-by: Paul Yang <kaishen.yy@antfin.com>
(Merged from https://github.com/openssl/openssl/pull/9715)

Fix no-ec

A test in sslapitest.c was failing in a no-ec build because we were using
an EC based ciphersuite. That particular test doesn't require EC
specifically, so we swap to a non EC based ciphersuite.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9716)

Fix no-des

Don't refer to cipher functions in the providers that have been compiled
out.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9719)

Update fuzz README.md

Building with enable-fuzz-afl has always required no-shared. We now also
need no-module for a successful build. Therefore update the README
accordingly.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9721)

Fix data races in EVP_CIPHER_fetch and EVP_MD_fetch

Don't modify the cipher/md we just fetched - it could be shared by multiple
threads.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9590)

Make sure we pre-initialise properties

Simplify the initialisation of the core by pre-initialising properties.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9590)

Fix context locking

Some parts of OPENSSL_CTX intialisation can get quite complex (e.g. RAND).
This can lead to complex interactions where different parts of the library
try to initialise while other parts are still initialising. This can lead
to deadlocks because both parts want to obtain the init lock.

We separate out the init lock so that it is only used to manage the
dynamic list of indexes. Each part of the library gets its own
initialisation lock.

Fixes #9454

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9590)

Allow an output indentation of zero in apps.

Previously, it would indent one space even if zero were specified.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9725)

openssl provider: New sub-command, for provider discovery

This command is somewhat similar to 'openssl engine', but displays
what it can about the given providers.

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9697)

Move print_param_types() to libapps, and give it indent argument

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9697)

Coverty fixes for MACs

Reviewed-by: Shane Lontis <shane.lontis@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9700)

OPENSSL_info(): add the item OPENSSL_INFO_SEED_SOURCE and use it

'openssl version -r' prints the seed source based on compiler macros.
This does not necessarily reflect the library's idea of what seed
sources to use, so we reimplement the list of seed sources as a
OPENSSL_info() item and display that instead.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/9689)

Fix bogus check for EVP_PKEY_supports_digest_nid() in check_cert_usable()

In commit 2d263a4a73 ("Honour mandatory digest on private key in
has_usable_cert()" I added two checks for the capabilities of the
EVP_PKEY being used. One of them was wrong, as it should only be
checking the signature of the X.509 cert (by its issuer) against the
sigalgs given in a TLS v1.3 signature_algorithms_cert extension.

Remove it and provide the code comments which, if they'd been present
in the first place, would hopefully have prevented the mistake.

Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9672)

testing: set OPENSSL_MODULES to the providers directory by default

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9618)