oweals/u-boot.git
7 years agoks2_evm: Add EEPROM based board detection helper functions
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:22 +0000 (17:25 -0500)]
ks2_evm: Add EEPROM based board detection helper functions

Add a function that can be used to determine if the board being ran on is
a K2G Industrial Communication Engine EVM or K2G General Purpose EVM based
on values programmed on the EEPROM.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:21 +0000 (17:25 -0500)]
ARM: k2g: Program DDRPHY_DATX8 registers via mask and value variables

Different K2G evms may need to program the various
KS2_DDRPHY_DATX8_X_OFFSET registers in different ways. Therefore, use
the mask and val registers for each KS2_DDRPHY_DATAX_X_OFFSET to
properly program the register.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: k2g: Program DDR PHY MR2 register with the default value
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:20 +0000 (17:25 -0500)]
ARM: k2g: Program DDR PHY MR2 register with the default value

K2G GP doesn't require the MR2 register to be programed since the
default is good enough. However, newer K2G boards do need to change
this register value. Therefore, instead of not writing this register if
ran on a K2G board just program the value to be written to match the
default/reset value.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: keystone2: Add additional fields used for DDR3 configuration
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:19 +0000 (17:25 -0500)]
ARM: keystone2: Add additional fields used for DDR3 configuration

Future boards will need to configure DDR3 registers in a slightly
different manner. Support this by defining additional variables and
defines that will be utilized later.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agodefconfig: keystone2: Enable U-boot runtime DTB detection
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:18 +0000 (17:25 -0500)]
defconfig: keystone2: Enable U-boot runtime DTB detection

Enable various config options to allow U-boot at runtime to select the
proper dtb to use from the list of dtb's within the FIT image.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoks2_evm: Add EEPROM based board detection
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:17 +0000 (17:25 -0500)]
ks2_evm: Add EEPROM based board detection

Some K2G evms have their EEPROM programming while most do not. Therefore,
add EEPROM board detection to be used as the default method and fall back
to the alternative board detection when needed.

Also reorder board configuration. Perform bare minimal configuration
initially since board detection hasn't ran. Finish board configuration
once the board has been identified.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: keystone2: Define board_fit_config_name_match for Keystone 2 boards
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:16 +0000 (17:25 -0500)]
ARM: keystone2: Define board_fit_config_name_match for Keystone 2 boards

Now with support for U-boot runtime dtb selection each board needs to
define board_fit_config_name_match so U-boot can determine what the
correct dtb is within the FIT blob.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: k2g: Define embedded_dtb_select for runtime DTB selection in U-boot
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:15 +0000 (17:25 -0500)]
ARM: k2g: Define embedded_dtb_select for runtime DTB selection in U-boot

For K2G, runtime DTB selection utilizes the embedded_dtb_select function.
Therefore, define the function which will perform a EEPROM read and then
retries selecting the correct dtb now that it can detect which board its
on. For other Keystone devices use an empty function since they will still
use the embedded FIT functionality but their FIT will only contain a single
dtb.

Most production K2G boards do not have their EEPROM programmed. Therefore,
perform a test to verify a K2G GP is currently being used and if it is then
set the values normally set by a EEPROM read.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: keystone2: Allow to build with all image formats
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:14 +0000 (17:25 -0500)]
ARM: keystone2: Allow to build with all image formats

u-boot.bin is a copy of:
u-boot-fit-dtb.bin if CONFIG_FIT_EMBED is enabled,
u-boot-dtb.bin if CONFIG_OF_SEPARATE is enabled,
u-boot-nodtb.bin if DT is not enabled.
So, use u-boot.bin to to generate keystone images instead of
u-boot-dtb.bin

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoMakefile: Build additional binaries for dtb FIT blobs appended to U-boot
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:13 +0000 (17:25 -0500)]
Makefile: Build additional binaries for dtb FIT blobs appended to U-boot

Add additional make targets and options for building embedded FIT U-boot
images.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoboard_f: Add new function to allow runtime DTB selection
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:12 +0000 (17:25 -0500)]
board_f: Add new function to allow runtime DTB selection

Runtime U-boot dtb selection is generally a two step process. First step
is to simply use an initial generic dtb. The second step is to select
the dtb and perhaps execute additional code ones U-boot knows what board
it is running on. Embedded_dtb_select handles the second step by allowing
board specific code to run and perform what ever necessary configuration
that is needed.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoarm: dts: Add new "generic" 66AK2Gx device tree file.
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:11 +0000 (17:25 -0500)]
arm: dts: Add new "generic" 66AK2Gx device tree file.

With U-boot runtime board detect for DTB selection a "default" dtb needs
to be created. This will be used temporarily until the "proper" dtb is
selected.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: dts: k2g: Introduce U-boot specific dtsi file
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:10 +0000 (17:25 -0500)]
ARM: dts: k2g: Introduce U-boot specific dtsi file

Introduce K2G evm specific dtsi file for U-boot specific configurations.
This will help seperate U-boot only configurations thus making it easier to
keep device tree files synced between U-boot and Linux.

For now only add nodes to allow i2c drivers to be probed early during
the boot process.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agodts: Allow OF_LIST to depend on FIT_EMBED
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:09 +0000 (17:25 -0500)]
dts: Allow OF_LIST to depend on FIT_EMBED

OF_LIST will be useable by SPL and U-boot. Therefore, update its
dependency to allow it to be enable by either SPL or U-boot specific
config option.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Andrew F. Davis <afd@ti.com>
7 years agoti: common: board_detect: Add function to determine if EEPROM was read
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:08 +0000 (17:25 -0500)]
ti: common: board_detect: Add function to determine if EEPROM was read

When the EEPROM is first read its contents are stored in memory as a
cache to avoid further I2C operations. To determine if the EEPROM was
previously read the easiest way is to check the memory to see if the
EEPROM's magic header value is set. Create a new function that can
determine if the EEPROM was previously read or not without having to
perform a I2C transaction.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agofdt: Enable selecting correct DTB from appended FIT Image
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:07 +0000 (17:25 -0500)]
fdt: Enable selecting correct DTB from appended FIT Image

This patch gives U-boot the runtime support to have the board specific
code decide which FDT to use. This is especially useful for devices
that need this type of runtime determination and also doesn't use SPL.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoboot_fit: Create helper functions that can be used to select DTB out of FIT
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:06 +0000 (17:25 -0500)]
boot_fit: Create helper functions that can be used to select DTB out of FIT

Some platforms may append a FIT image to the U-boot image. This function
aids in parsing the FIT image and selecting the correct DTB at runtime.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agospl: fit: Break out some functions into a common file
Cooper Jr., Franklin [Fri, 16 Jun 2017 22:25:05 +0000 (17:25 -0500)]
spl: fit: Break out some functions into a common file

Some of the functions within spl_fit will be used for non spl purposes.
Instead of duplicating functions simply break the functions to be reused
into its own file.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Only add the new define to image.h, otherwise we see breakage
due to massive include leakage into host tools in some cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agoti: common: board_detect: Allow settings board detection variables manually
Nishanth Menon [Fri, 16 Jun 2017 22:25:04 +0000 (17:25 -0500)]
ti: common: board_detect: Allow settings board detection variables manually

In some situations the EEPROM used for board detection may not be
programmed or simply programmed incorrectly. Therefore, it may be
necessary to "simulate" reading the contents of the EEPROM to set
appropriate variables used in the board detection code.

This may also be helpful in certain boot modes where doing i2c reads
may be costly and the config supports running only a specific board.

Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Franklin S Cooper Jr. <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
7 years agoARM: dts: keystone-k2e-evm: Add U-boot specific dtsi file
Cooper Jr., Franklin [Fri, 16 Jun 2017 21:16:14 +0000 (16:16 -0500)]
ARM: dts: keystone-k2e-evm: Add U-boot specific dtsi file

With Davinci I2C switching to device model, K2E requires U-boot specific
device tree entries. This is only required for I2C 1 which is needed
extremely early during the boot process.

Fixes: 1743d040b1df ("ARM: keystone: Enable DM_I2C by default")
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
7 years agoPrepare v2017.07 v2017.07
Tom Rini [Mon, 10 Jul 2017 17:07:38 +0000 (13:07 -0400)]
Prepare v2017.07

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agokm/common: remove unused function declarations
Holger Brunck [Mon, 10 Jul 2017 07:46:23 +0000 (09:46 +0200)]
km/common: remove unused function declarations

Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
7 years agocmd, nand: fix broken output of "nand info"
Lothar Waßmann [Mon, 10 Jul 2017 06:44:24 +0000 (08:44 +0200)]
cmd, nand: fix broken output of "nand info"

If the value of either "nand options" or "bbt options" has a zero in
the most significant nibble, the '0x' prefix will be isolated from the
value like shown below:
|Device 0: nand0, sector size 128 KiB
|  Page size       2048 b
|  OOB size          64 b
|  Erase size    131072 b
|  subpagesize     2048 b
|  options     0x40000200
|  bbt options 0x   60000

Change the format string to produce leading zeroes filling the gap.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
7 years agolibfdt: Drop -FDT_ERR_TOODEEP
Simon Glass [Mon, 10 Jul 2017 03:30:17 +0000 (21:30 -0600)]
libfdt: Drop -FDT_ERR_TOODEEP

This error code has not been upstreamed and is not really needed since it
is unlikely to be triggered. Drop it to maintain compatability with
upstream.

Reported-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
7 years agoconfigs: Resync defconfigs
Tom Rini [Sun, 9 Jul 2017 00:32:11 +0000 (20:32 -0400)]
configs: Resync defconfigs

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agoMAINTAINERS: drop bcm283x/rpi maintainership
Stephen Warren [Fri, 7 Jul 2017 16:20:43 +0000 (10:20 -0600)]
MAINTAINERS: drop bcm283x/rpi maintainership

It's been a while since I've touched U-Boot on the Raspberry Pi and
other things have been taking my time. Drop my maintainership for this
port.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
7 years agopowerpc, 8xx: Add support for MCR3000 board from CSSI
Christophe Leroy [Fri, 7 Jul 2017 08:16:42 +0000 (10:16 +0200)]
powerpc, 8xx: Add support for MCR3000 board from CSSI

CS Systemes d'Information (CSSI) manufactures two boards, named MCR3000
and CMPC885 which are respectively based on MPC866 and MPC885 processors.

This patch adds support for the first board.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
7 years agopowerpc, 8xx: move Serial driver to drivers/serial/
Christophe Leroy [Thu, 6 Jul 2017 08:33:27 +0000 (10:33 +0200)]
powerpc, 8xx: move Serial driver to drivers/serial/

At the same time, move to Kconfig

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
7 years agopowerpc, 8xx: move SPI driver to drivers/spi/
Christophe Leroy [Thu, 6 Jul 2017 08:33:25 +0000 (10:33 +0200)]
powerpc, 8xx: move SPI driver to drivers/spi/

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
7 years agopowerpc, 8xx: move FEC Ethernet driver in drivers/net
Christophe Leroy [Thu, 6 Jul 2017 08:33:23 +0000 (10:33 +0200)]
powerpc, 8xx: move FEC Ethernet driver in drivers/net

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
7 years agopowerpc, 8xx: Migrate to Kconfig
Christophe Leroy [Thu, 6 Jul 2017 08:33:21 +0000 (10:33 +0200)]
powerpc, 8xx: Migrate to Kconfig

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agopowerpc, 8xx: Properly set CPM frequency in the device tree
Christophe Leroy [Thu, 6 Jul 2017 08:33:19 +0000 (10:33 +0200)]
powerpc, 8xx: Properly set CPM frequency in the device tree

For processors whose core runs at twice the bus frequency,
the fallback frequency calculation in Linux provides a wrong
result. Therefore, U-boot needs to pass the correct value.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agopowerpc, 8xx: Handle checkpatch errors and some of the warnings/checks
Christophe Leroy [Thu, 6 Jul 2017 08:33:17 +0000 (10:33 +0200)]
powerpc, 8xx: Handle checkpatch errors and some of the warnings/checks

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agopowerpc, 8xx: Implement GLL2 ERRATA
Christophe Leroy [Thu, 6 Jul 2017 14:49:56 +0000 (16:49 +0200)]
powerpc, 8xx: Implement GLL2 ERRATA

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Wolfgang Denk <wd@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agopowerpc, 8xx: Use IO accessors to access IO memory
Christophe Leroy [Thu, 6 Jul 2017 08:33:13 +0000 (10:33 +0200)]
powerpc, 8xx: Use IO accessors to access IO memory

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agopowerpc, 8xx: move specific reginfo
Christophe Leroy [Thu, 6 Jul 2017 08:33:11 +0000 (10:33 +0200)]
powerpc, 8xx: move specific reginfo

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agopowerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/
Christophe Leroy [Thu, 6 Jul 2017 08:33:09 +0000 (10:33 +0200)]
powerpc, 8xx: move immap.c in arch/powerpc/cpu/mpc8xx/

immap.c used to be common to several CPUs. It is now
only linked to the 8xx, so this patch moves it into
arch/powerpc/cpu/mpc8xx/

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agopowerpc: Partialy restore core of mpc8xx
Christophe Leroy [Thu, 6 Jul 2017 08:23:22 +0000 (10:23 +0200)]
powerpc: Partialy restore core of mpc8xx

CS Systemes d'Information (CSSI) manufactures 8xx boards for
critical communication systems. Those boards have been
running U-Boot since 2010 and will have to be maintained
until at least 2027.

commit 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f
("powerpc, 8xx: remove support for 8xx") orphaned those boards
by removing support for the mpc8xx CPU.

This commit partially restores support for the 8xx, with the
following limitations:
- Restores support for MPC866 and MPC885 only
- Does not restore IDE, PCMCIA, I2C, USB
- Does not restore examples
- Does not restore POST
- Does not restore Ethernet on SCC
- Does not restore console on SCC
- Does not restore bedbug and kgdb support

As the 866 and 885 do not support the following features,
they are not restored either:
- VIDEO / LCD
- RTC clock

The CPM uCODE patch is not restored either, because:
- 866 and 885 already have support for I2C and SPI relocation
without a uCODE patch
- relocation of SMC, I2C or SPI is only needed for using SCCs
for Ethernet or QMC

The dynamic setup/calculation of clocks is removed, we
expect the target being use with the clock and PLPRCR register
defined in the configuration.
All the clock settings for 8xx prior to 866 is removed as
well as we now only support 866 and 885.

This code is mature and addresses mature boards. Therefore
all code enclosed in '#if 0/#endif' and '#if XX_DEBUG/#endif'
is unneeded.

The following files are not restored by this patch:

- arch/powerpc/cpu/mpc8xx/bedbug_860.c
- arch/powerpc/cpu/mpc8xx/fec.h
- arch/powerpc/cpu/mpc8xx/kgdb.S
- arch/powerpc/cpu/mpc8xx/plprcr_write.S
- arch/powerpc/cpu/mpc8xx/scc.c
- arch/powerpc/cpu/mpc8xx/upatch.c
- arch/powerpc/cpu/mpc8xx/video.c
- arch/powerpc/include/asm/status_led.h
- arch/powerpc/lib/ide.c
- arch/powerpc/lib/ide.h
- doc/README.MPC866
- drivers/pcmcia/mpc8xx_pcmcia.c
- drivers/rtc/mpc8xx.c
- drivers/usb/gadget/mpc8xx_udc.c
- drivers/video/mpc8xx_lcd.c
- examples/standalone/test_burst.c
- examples/standalone/test_burst.h
- examples/standalone/test_burst_lib.S
- examples/standalone/timer.c
- include/mpc823_lcd.h
- include/usb/mpc8xx_udc.h
- post/cpu/mpc8xx/Makefile
- post/cpu/mpc8xx/cache.c
- post/cpu/mpc8xx/cache_8xx.S
- post/cpu/mpc8xx/ether.c
- post/cpu/mpc8xx/spr.c
- post/cpu/mpc8xx/uart.c
- post/cpu/mpc8xx/usb.c
- post/cpu/mpc8xx/watchdog.c

Some of the restored files are not located in a proper location.
In order to keep traceability of the changes, they will be
moved to their correct location and moved to Kconfig in a
followup patch.

This patch also declares CSSI as point of contact for the update
of the 8xx platform, as those boards are the only ones still
being maintained on the 8xx area. A later patch will add
those boards to the tree.

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
7 years agoam335x: sl50: Enable CONFIG_AUTOBOOT_KEYED
Enric Balletbo i Serra [Thu, 6 Jul 2017 09:37:58 +0000 (11:37 +0200)]
am335x: sl50: Enable CONFIG_AUTOBOOT_KEYED

On startup the SL50 board halt at U-Boot prompt. Use CONFIG_AUTOBOOT_KEYED
to enable autoboot for this board and define the <SPACE> key to get the
U-Boot prompt.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
7 years agoboard/BuR/brppt1: fix MMC boot
Hannes Schmelzer [Thu, 6 Jul 2017 06:47:14 +0000 (08:47 +0200)]
board/BuR/brppt1: fix MMC boot

since commit
'd5abcf94c7123167725fc22ace342f0d455093c1' -
ti: boot: Register the MMC controllers in SPL in the same way as in u-boot

MMC boot on brppt1 board is broken, with this commit we make our board
    working again.

Signed-off-by: Hannes Schmelzer <hannes.schmelzer@br-automation.com>
7 years agowdt: Unify option of timeout value
Andy Shevchenko [Wed, 5 Jul 2017 17:44:08 +0000 (20:44 +0300)]
wdt: Unify option of timeout value

There is no need to duplicate same option with different name.

Kill HW_WATCHDOG_TIMEOUT_MS in favor of WATCHDOG_TIMEOUT_MSECS.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agowdt: Fix spelling Resettting -> Resetting
Andy Shevchenko [Wed, 5 Jul 2017 17:44:06 +0000 (20:44 +0300)]
wdt: Fix spelling Resettting -> Resetting

Fix spelling Resettting -> Resetting.
No functional change intended.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agoavr32: Retire AVR32 for good
Andy Shevchenko [Wed, 5 Jul 2017 13:25:22 +0000 (16:25 +0300)]
avr32: Retire AVR32 for good

AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
7 years agostm32: Correct positioning of declaration
Simon Glass [Sat, 1 Jul 2017 17:06:09 +0000 (11:06 -0600)]
stm32: Correct positioning of declaration

The current code gives a warning:

arch/arm/mach-stm32/stm32f7/soc.c: In function 'arch_cpu_init':
arch/arm/mach-stm32/stm32f7/soc.c:38:2: error: 'for' loop initial
    declarations are only allowed in C99 or C11 mode
  for (int i = 0; i < ARRAY_SIZE(stm32_region_config); i++)
  ^
arch/arm/mach-stm32/stm32f7/soc.c:38:2: note: use option -std=c99,
    -std=gnu99, -std=c11 or -std=gnu11 to compile your code

Fix it by moving the declaration to the top of the function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Series-cc trini

7 years agokm/common: remove unused code
Holger Brunck [Fri, 30 Jun 2017 13:33:35 +0000 (15:33 +0200)]
km/common: remove unused code

The 82xx board mgcoge3ne was removed from the codebase, so this is dead
code.

Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years agoconfigs: Odroid C2: enable device tree overlays
xypron.glpk@gmx.de [Thu, 29 Jun 2017 19:29:55 +0000 (21:29 +0200)]
configs: Odroid C2: enable device tree overlays

The Odroid C2 comes with several expansion options such as an RTC module.
As these expansions are not considered in the Linux device tree they have
to be enabled via device tree overlays.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
7 years agomkimage: fix display of image types list
Baruch Siach [Thu, 29 Jun 2017 17:37:08 +0000 (20:37 +0300)]
mkimage: fix display of image types list

Since commit 5b9d44df2307f (mkimage: Display a better list of available image
types) mkimage usage text suggest to "use -T to see a list of available image
types". Unfortunately, commit 02221f29deb8 (mkimage: Convert to use getopt())
broke that feature, because getopt() fails when -T has no option argument.

Add a pseudo image type name 'list' that lists all image types. Update the
usage text accordingly.

Cc: Simon Glass <sjg@chromium.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
7 years agoCHIP: add device tree overlay support
Peter Robinson [Mon, 26 Jun 2017 13:25:06 +0000 (14:25 +0100)]
CHIP: add device tree overlay support

CHIP and CHIP Pro devices have options of DIP addon boards some of which need
overlays from the beginning so it makes sense to enable device tree overlays.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
7 years ago96boards: dragonboard/hikey: add device tree overlay support
Peter Robinson [Mon, 26 Jun 2017 13:25:05 +0000 (14:25 +0100)]
96boards: dragonboard/hikey: add device tree overlay support

96boards CE devices such as the DragonBoard and Hikey devices have numerous
mezzanine options some of which need overlays from the beginning so it makes
sense to enable device tree overlays.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
7 years agoam335x: beagle/evm: add device tree overlay support
Peter Robinson [Mon, 26 Jun 2017 13:25:04 +0000 (14:25 +0100)]
am335x: beagle/evm: add device tree overlay support

TI am33xx devices such as the BeagleBone devices have numerous cape options such
as screens some of which need overlays from the beginning so it makes sense to
enable evice tree overlays.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
7 years agoRaspberry Pi: add device tree overlay support
Peter Robinson [Mon, 26 Jun 2017 13:25:03 +0000 (14:25 +0100)]
Raspberry Pi: add device tree overlay support

Raspberry Pi has numerous HAT and other HW expansion options such as screens and
cameras some of which need overlays from the beginning so it makes sense to
enable evice tree overlays.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
7 years agoarm64: use psci reset on snapdragon
Rob Clark [Mon, 26 Jun 2017 13:22:23 +0000 (09:22 -0400)]
arm64: use psci reset on snapdragon

This actually works on snapdragon.. not sure why we weren't using it.
Fixes reboot/poweroff when using UEFI.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Alexander Graf <agraf@suse.de>
7 years agoigep003x: Falcon mode
Ladislav Michl [Sun, 25 Jun 2017 08:30:47 +0000 (10:30 +0200)]
igep003x: Falcon mode

Implement spl_start_uboot to let Falcon mode work.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Heiko Schocher <hs@denx.de>
7 years agoigep00x0: Enable UBI fastmap
Ladislav Michl [Sun, 25 Jun 2017 08:29:25 +0000 (10:29 +0200)]
igep00x0: Enable UBI fastmap

Fastmap significantly reduces flash scan time, enable it by default.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Heiko Schocher <hs@denx.de>
7 years agospl: Make UBI fastmap support Kconfig selectable
Ladislav Michl [Sun, 25 Jun 2017 08:26:11 +0000 (10:26 +0200)]
spl: Make UBI fastmap support Kconfig selectable

Fastmap was always enabled in ubispl, make it selectable by
CONFIG_MTD_UBI_FASTMAP.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Heiko Schocher <hs@denx.de>
7 years agoodroid-c2: Populate serial# environment variable from efuse
Martin Böh [Fri, 23 Jun 2017 13:40:00 +0000 (13:40 +0000)]
odroid-c2: Populate serial# environment variable from efuse

7 years agogpio: add static to get_function()
Masahiro Yamada [Thu, 22 Jun 2017 07:50:25 +0000 (16:50 +0900)]
gpio: add static to get_function()

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
7 years agoserial: make serial_stub_* to static functions
Masahiro Yamada [Thu, 22 Jun 2017 07:48:49 +0000 (16:48 +0900)]
serial: make serial_stub_* to static functions

Add missing static to serial_stub_puts().

Unexport serial_stub_{getc,tstc} because they are used locally.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
7 years agoMerge tag 'signed-efi-next' of git://github.com/agraf/u-boot
Tom Rini [Tue, 4 Jul 2017 12:00:16 +0000 (08:00 -0400)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot

Patch queue for efi - 2017-07-04

Highlights this time: bugfixes. With these changes, OpenBSD should
be more happy.

7 years agoefi_loader: abort on unsupported relocation type
xypron.glpk@gmx.de [Mon, 3 Jul 2017 22:12:58 +0000 (00:12 +0200)]
efi_loader: abort on unsupported relocation type

If a relocation type is not supported loading the EFI binary
should be aborted.

Writing a message only is insufficient.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: use a() != b coding style]
Signed-off-by: Alexander Graf <agraf@suse.de>
7 years agoefi_loader: Add efi-next git tree to MAINTAINERS file
Alexander Graf [Mon, 3 Jul 2017 16:10:31 +0000 (18:10 +0200)]
efi_loader: Add efi-next git tree to MAINTAINERS file

The efi-next tree lives on github, not the usual denx git.
Reflect this in the MAINTAINERS file so that people can
find it.

Signed-off-by: Alexander Graf <agraf@suse.de>
7 years agoefi_loader: efi_handle_protocol set attributes
xypron.glpk@gmx.de [Thu, 29 Jun 2017 19:16:19 +0000 (21:16 +0200)]
efi_loader: efi_handle_protocol set attributes

UEFI spec 2.7 indicates that HandleProtocol can be implemented
by calling OpenProtocol with
attributes = EFI_OPEN_PROTOCOL_BY_HANDLE_PROTOCOL.

Currently we pass attributes = 0 to efi_open_protocol. 0 is not a
valid value when calling OpenProtocol. This does not cause any errors
yet because our implementation of OpenProtocol is incomplete.

We should pass the correct value to enable a fully compliant
implementation of OpenProtocol in the future.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
7 years agoPrepare v2017.07-rc3 v2017.07-rc3
Tom Rini [Mon, 3 Jul 2017 23:58:08 +0000 (19:58 -0400)]
Prepare v2017.07-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agopowerpc: remove 4xx support
Heiko Schocher [Tue, 27 Jun 2017 14:49:14 +0000 (16:49 +0200)]
powerpc: remove 4xx support

There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
7 years agodrivers, block: remove sil680 driver
Heiko Schocher [Tue, 27 Jun 2017 14:49:13 +0000 (16:49 +0200)]
drivers, block: remove sil680 driver

driver is not used anymore, so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
7 years agoefi_loader: add static to local functions
Masahiro Yamada [Thu, 22 Jun 2017 08:49:03 +0000 (17:49 +0900)]
efi_loader: add static to local functions

These are locally used in lib/efi_loader/efi_boottime.c

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
7 years agoefi_loader: check CreateEvent() parameters
Jonathan Gray [Sun, 12 Mar 2017 08:26:07 +0000 (19:26 +1100)]
efi_loader: check CreateEvent() parameters

Add some of the invalid parameter checks described in the UEFI
specification for CreateEvent().  This does not include checking
the validity of the type and tpl parameters.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Acked-By: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: fix checkpatch.pl indent warning]
Signed-off-by: Alexander Graf <agraf@suse.de>
7 years agoefi_loader: run CreateEvent() notify function based on flags
Jonathan Gray [Sun, 12 Mar 2017 08:26:06 +0000 (19:26 +1100)]
efi_loader: run CreateEvent() notify function based on flags

The UEFI specification states that the tpl, function and context
arguments are to be ignored if neither EVT_NOTIFY_WAIT or
EVT_NOTIFY_SIGNAL are specified.  This matches observed behaviour with
an AMI EDK2 based UEFI implementation.

Skip calling the notify function if neither flag is present.

Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Acked-By: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
7 years agoefi_loader: Add check for fallback fdt memory reservation
Alexander Graf [Mon, 3 Jul 2017 11:32:35 +0000 (13:32 +0200)]
efi_loader: Add check for fallback fdt memory reservation

When running bootefi, we allocate new space but never check whether
the allocation succeeded. This patch adds a check so that in case
things go wrong, we at least know they did.

Signed-off-by: Alexander Graf <agraf@suse.de>
7 years agopico-imx7d: Remove bouncing email
Fabio Estevam [Thu, 29 Jun 2017 17:07:42 +0000 (14:07 -0300)]
pico-imx7d: Remove bouncing email

Wig Cheng's email bounces, so remove it from the maintainers list.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
7 years agodoc: restore doc/README.fsl-clk
Christophe Leroy [Tue, 27 Jun 2017 14:00:24 +0000 (16:00 +0200)]
doc: restore doc/README.fsl-clk

doc/README.fsl-clk was removed in commit
5b8e76c35ec31 ("powerpc, 8xx: remove support for 8xx")
allthought CONFIG_SYS_FSL_CLK is defined in
arch/arm/cpu/armv8/fsl-layerscape/Kconfig and still in use
in the following configs:

./include/configs/mx53loco.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/m53evk.h:16:#define CONFIG_SYS_FSL_CLK
./include/configs/mx25pdk.h:17:#define CONFIG_SYS_FSL_CLK
./include/configs/usbarmory.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/ls1021aqds.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53cx9020.h:22:#define CONFIG_SYS_FSL_CLK
./include/configs/colibri_vf.h:17:#define CONFIG_SYS_FSL_CLK
./include/configs/mx35pdk.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/woodburn_common.h:19:#define CONFIG_SYS_FSL_CLK
./include/configs/mx7_common.h:25:#define CONFIG_SYS_FSL_CLK
./include/configs/ls1021aiot.h:12:#define CONFIG_SYS_FSL_CLK
./include/configs/ls1021atwr.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53ard.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53smd.h:21:#define CONFIG_SYS_FSL_CLK
./include/configs/mx51evk.h:16:#define CONFIG_SYS_FSL_CLK
./include/configs/mx6_common.h:31:#define CONFIG_SYS_FSL_CLK
./include/configs/vf610twr.h:14:#define CONFIG_SYS_FSL_CLK
./include/configs/mx53evk.h:21:#define CONFIG_SYS_FSL_CLK

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Heiko Schocher <hs@denx.de>
7 years ago.travis.yml: All DENX boards are now under Aries
Tom Rini [Fri, 30 Jun 2017 01:24:16 +0000 (21:24 -0400)]
.travis.yml: All DENX boards are now under Aries

DENX hardware is now under Aries Embedded, update the job.

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agoRevert "armv7m: Disable D-cache when booting nommu(ARMv7M) Linux kernel"
Tom Rini [Fri, 30 Jun 2017 01:18:48 +0000 (21:18 -0400)]
Revert "armv7m: Disable D-cache when booting nommu(ARMv7M) Linux kernel"

The author of the commit discovered later on that this was already being
done in cleanup_before_linux() on arch/arm/cpu/armv7m/cpu.c.

This reverts commit 8f079cccb369995e46a2ab530d5d60b88c1e70bb.

Signed-off-by: Tom Rini <trini@konsulko.com>
7 years agoMerge git://git.denx.de/u-boot-arc
Tom Rini [Thu, 29 Jun 2017 19:28:51 +0000 (15:28 -0400)]
Merge git://git.denx.de/u-boot-arc

7 years agoARM: at91: ma5d4: Support both SF and eMMC SoMs
Marek Vasut [Tue, 2 May 2017 18:27:50 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Support both SF and eMMC SoMs

Discern the SoMs based on the presence of SPI flash to support both
variants of the SoM, one booting from SPI NOR and one booting from
eMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Enable random ethaddr
Marek Vasut [Tue, 2 May 2017 18:27:49 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Enable random ethaddr

Use random ethaddr by default in case no ethaddr is set.

Signed-off-by: Marek Vasut <marex@denx.de>
7 years agoARM: at91: ma5d4: Switch environment start to eMMC
Marek Vasut [Tue, 2 May 2017 18:27:48 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Switch environment start to eMMC

The redesigned version of the SoM which was released onto the market
does no longer contain SPI flash, but boots from the eMMC. Move the
environment storage to the eMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Boot from MMC2 when using SAM-BA
Marek Vasut [Tue, 2 May 2017 18:27:47 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Boot from MMC2 when using SAM-BA

Continue loading U-Boot from MMC2 when the SPL was loaded using SAM-BA
loader. This allows the board to boot system from the removable media
instead of the eMMC, which is useful for commissioning purposes. When
booting from the eMMC, always boot from it as it is not possible to
boot from the SD interface directly.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Enable support for booting from eMMC
Marek Vasut [Tue, 2 May 2017 18:27:46 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Enable support for booting from eMMC

The SoM has been redesigned to work around bug in the SoC and is now
capable of booting from the eMMC. Add support for booting from eMMC.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Swap SD/MMC controller order
Marek Vasut [Tue, 2 May 2017 18:27:45 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Swap SD/MMC controller order

The SDHCI1 is the primary boot controller on rev. 2.1 SoM, which
is the version available on the market. Swap the controller order
to match this and future versions of the SoM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Init SD/MMC controller in SPL
Marek Vasut [Tue, 2 May 2017 18:27:44 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Init SD/MMC controller in SPL

Init the controllers, otherwise the board cannot boot from SD/MMC.
This boot option is new on rev. 2.1 SoM .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Enable DFU and UMS
Marek Vasut [Tue, 2 May 2017 18:27:43 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Enable DFU and UMS

Enable DFU and USB mass storage support for the DENX MA5D4 SoM.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Reset CAN controllers late
Marek Vasut [Tue, 2 May 2017 18:27:42 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Reset CAN controllers late

The CAN controllers need slight delay between toggling of their reset
line. Move this action into board_init(), otherwise timer will not be
initialized and the board might hang.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
7 years agoARM: at91: ma5d4: Switch DDR2 controller to sequencial address decoding
Marek Vasut [Tue, 2 May 2017 18:27:41 +0000 (20:27 +0200)]
ARM: at91: ma5d4: Switch DDR2 controller to sequencial address decoding

According to the datasheet, sequential mapping is used for DDR
SDRAM, while interleaved mapping is used for regular SDRAM.
Incorrect configuration of this bit does indeed cause sporadic
memory instability.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Wenyou Yang <wenyou.yang@atmel.com>
7 years agoARM: atmel: Rename MA5D4EVK
Marek Vasut [Tue, 2 May 2017 18:27:40 +0000 (20:27 +0200)]
ARM: atmel: Rename MA5D4EVK

The board is now manufactured by Aries Embedded GmbH , rename it.

Signed-off-by: Marek Vasut <marex@denx.de>
7 years agoarc: Add support for HS Development Kit board
Alexey Brodkin [Fri, 25 Nov 2016 13:23:43 +0000 (16:23 +0300)]
arc: Add support for HS Development Kit board

ARC HS Development Kit board is a new low-cost
development platform sporting ARC HS38 in real silicon
with nice set of features such as:
 * Quad-core ARC HS38 with 512 kB L2 cache and running @1GHz
 * 4Gb of DDR (we use only lowest 1Gb out of it now)
 * Lots of DesigWare peripherals
 * Different connectivity modules:
     - Synopsys HAPS HT3
     - Arduino-compatible connector
     - MikroBUS

This initial commit supports the following peripherals:
 * UART (DW 8250)
 * Ethernet (DW GMAC)
 * SD/MMC (DW Mobile Storage)
 * USB 1.1 & 2.0

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
7 years agoarcv2: Set IOC aperture so it covers available DDR
Alexey Brodkin [Mon, 26 Jun 2017 08:46:47 +0000 (11:46 +0300)]
arcv2: Set IOC aperture so it covers available DDR

We used to use the same memory layout and size for a couple of
boards and thus we just hardcoding IOC aperture start and size.

Now when we're getting more boards with more memory on board we
need to have an ability to set IOC so it matches real DDR layout
and size.

Even though it is not really a must but for simplicity we assume
IOC covers all the DDR we have, that gives us a chance to not
bother where DMA buffers are allocated - any part of DDR is OK.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
7 years agoaxs10x: Move environment from I2C EEPROM to SD-card
Alexey Brodkin [Thu, 1 Jun 2017 14:09:38 +0000 (17:09 +0300)]
axs10x: Move environment from I2C EEPROM to SD-card

With deprecation of I2C EEPROM we we left without a permamnent
storage for U-Boot environment, but luckily we may simply use SD-card
with FAT partition for that.

Having environment on SD-card is much more convenient as it
allows us to preserve all the settings when moving from one board to
another. Moreover instead of 256 bytes of EEPROM we're now virtually
unlimited in stuff being placed in environment like complicated scripts
etc which are usually required in case of full-scale distros.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
7 years agoaxs10x: Get rid of both I2C and EEPROM who used to use I2C
Alexey Brodkin [Thu, 1 Jun 2017 13:27:27 +0000 (16:27 +0300)]
axs10x: Get rid of both I2C and EEPROM who used to use I2C

With eb5ba3aefdf0 "i2c: Drop use of CONFIG_I2C_HARD" in place we
cannot use I2C EEPROM any longer so we're dropping all references to
both EEPROM and I2C which was only used for EEPROM.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Simon Glass <sjg@chromium.org>
7 years agoboards: axs10x, nsim, tb100: Enable cmdline history
Alexey Brodkin [Fri, 21 Apr 2017 08:04:19 +0000 (11:04 +0300)]
boards: axs10x, nsim, tb100: Enable cmdline history

Enable shell commands history on ARC boards for
more convenience of users.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
7 years agoaxs10x: Add support of Ext2/4 FS
Alexey Brodkin [Tue, 18 Apr 2017 18:24:14 +0000 (21:24 +0300)]
axs10x: Add support of Ext2/4 FS

Those could be easily used on USB flash drives or on SD/MMC cards.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
7 years agoaxs101: Enable data cache
Alexey Brodkin [Tue, 18 Apr 2017 18:21:56 +0000 (21:21 +0300)]
axs101: Enable data cache

There's no reason to keep data cache disabled in axs101
board any longer, enabling it.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
7 years agoarc: arcv1: Disable master/slave check
Alexey Brodkin [Tue, 11 Apr 2017 15:24:25 +0000 (18:24 +0300)]
arc: arcv1: Disable master/slave check

ARCompact cores are not supposed to be used in SMP designs
(this doesn't stop people from creation of heterogeneous chips,
for an example keep reading) so there's no point in
checking ARCNUM and halting somebody if we build for ARC700.

Moreover on AXS101 board we have ARC770 in the ASIC together with
other ARC cores and ARC770 happens to be the last node in JTAG chain
with ARCNUM = 4. And existing check halts the one and only core we
want keep running.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
7 years agoatmel, at91: fix taurus board
Heiko Schocher [Wed, 28 Jun 2017 09:24:58 +0000 (11:24 +0200)]
atmel, at91: fix taurus board

since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support"

taurus board comes not up anymore. Fix it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
7 years agoat91, dfu, smartweb: set serial number
Heiko Schocher [Mon, 26 Jun 2017 11:26:14 +0000 (13:26 +0200)]
at91, dfu, smartweb: set serial number

since commit 842778a09104 dfu-util shows serial="UNDEFINED".

to see here again a serial number, we have to call
g_dnl_set_serialnumber().

Signed-off-by: Heiko Schocher <hs@denx.de>
7 years agoatmel, at91: fix smartweb board
Heiko Schocher [Fri, 23 Jun 2017 18:13:59 +0000 (20:13 +0200)]
atmel, at91: fix smartweb board

since commit: f8b7fff1d5c5 "serial: atmel_usart: Add clk support"

smartweb board comes not up anymore. Fix it.

Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Wenyou Yang <wenyou.yang@microchip.com>
7 years agodrivers, usb, gadget: fix compiler warnings for at91_udc.c
Heiko Schocher [Fri, 23 Jun 2017 18:13:58 +0000 (20:13 +0200)]
drivers, usb, gadget: fix compiler warnings for at91_udc.c

fix warnings:
drivers/usb/gadget/at91_udc.c:1344:12: warning: 'at91rm9200_udc_init' defined but not used [-Wunused-function]
drivers/usb/gadget/at91_udc.c:1379:13: warning: 'at91rm9200_udc_pullup' defined but not used [-Wunused-function]
drivers/usb/gadget/at91_udc.c:1476:12: warning: 'at91sam9263_udc_init' defined but not used [-Wunused-function]

Signed-off-by: Heiko Schocher <hs@denx.de>
7 years agoGE Bx50v3 boards: fix fdt file variable
Peter Robinson [Thu, 29 Jun 2017 12:21:38 +0000 (13:21 +0100)]
GE Bx50v3 boards: fix fdt file variable

The CONFIG_DEFAULT_FDT_FILE expects just the file not a full path
as that might vary depending on the variant of Linux distro you
might be using.

Cc: Martin Donnelly <martin.donnelly@ge.com>
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Fabio Estevam <fabio.estevam@nxp.com>
7 years agoscripts: config_whitelist: Handle lines with leading spaces/tabs
Bin Meng [Thu, 29 Jun 2017 03:36:25 +0000 (11:36 +0800)]
scripts: config_whitelist: Handle lines with leading spaces/tabs

Some Kconfig options are defined in a line with leading spaces/tabs.
Update build-whitelist/check-config scripts to handle such cases.
Generate a new config_whitelist.txt with new scripts.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
7 years agoARM: make memset and memcpy prompt message more clearly
Andy Yan [Wed, 28 Jun 2017 08:27:37 +0000 (16:27 +0800)]
ARM: make memset and memcpy prompt message more clearly

The origin SPL_USE_ARCH_MEMSET/MEMCPY use same prompt message
as USE_ARCH_MEMSET/MEMCPY, which makes it's hard to distinguish
them in menuconfig interface. This patch gives them different
prompt messages for spl and none-spl config.

Signed-off-by: Andy Yan <andy.yan@rock-chips.com>