librecmc/librecmc.git
8 years agomtd: add -c option for specifying amount of data to be used for checksum
Rafał Miłecki [Fri, 6 May 2016 12:37:05 +0000 (14:37 +0200)]
mtd: add -c option for specifying amount of data to be used for checksum

So far fixtrx was calculating checksum over amount of data matching
partition erase size. It was mostly a workaround of checksum problem
after changing anything in initial TRX content (e.g. formatting JFFS2).
Its main purpose was to make bootloader accept modified TRX. This didn't
provide much protection of flash data against corruption.

This new option lets caller request calculating checksum over a bigger
amount of data. It may be used e.g. to include whole kernel data for
checksum and hopefully make bootloader go info failsafe mode if
something goes wrong.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: trx: use separated buffer for TRX header
Rafał Miłecki [Mon, 9 May 2016 17:00:53 +0000 (19:00 +0200)]
mtd: trx: use separated buffer for TRX header

We plan to adjust usage of the main buffer to allow reading custom
amount of data for CRC32. This means we need another buffer that will be
always block aligned.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: seama: exit with error if Seama header wasn't found
rmilecki [Mon, 9 May 2016 15:33:42 +0000 (15:33 +0000)]
mtd: seama: exit with error if Seama header wasn't found

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: seama: fix image data handling
rmilecki [Mon, 9 May 2016 12:53:39 +0000 (12:53 +0000)]
mtd: seama: fix image data handling

1) Put sanity checks in one place
2) Respect provided offset
3) Read only as much data as needed for MD5 calculation

Thanks to the last change this is a great speedup and memory saver. On
devices with NAND flash we were allocating & reading about 128 MiB while
something about 8 MiB is enough.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: seama: move buf allocation to the MD5 function
rmilecki [Mon, 9 May 2016 12:53:36 +0000 (12:53 +0000)]
mtd: seama: move buf allocation to the MD5 function

This buf is only used in this function now, so lets move it there.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: seama: update MD5 using header in the first block buffer
rmilecki [Mon, 9 May 2016 12:53:33 +0000 (12:53 +0000)]
mtd: seama: update MD5 using header in the first block buffer

This will allow separating first block buffer from a buffer used for MD5
calculation.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: seama: add md5 to header struct
rmilecki [Mon, 9 May 2016 12:53:29 +0000 (12:53 +0000)]
mtd: seama: add md5 to header struct

This allows us to drop some extra offset calculations and simplifies
code a bit.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: check for Seama magic early when fixing MD5
rmilecki [Mon, 9 May 2016 09:54:48 +0000 (09:54 +0000)]
mtd: check for Seama magic early when fixing MD5

This avoid long (and unneeded) process of reading all data in case of
running on MTD not containig Seama entity.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: add missing breaks in a switch
rmilecki [Mon, 9 May 2016 07:51:50 +0000 (07:51 +0000)]
mtd: add missing breaks in a switch

On platforms supporting both: TRX and Seama calling "fixtrx" was
resulting in trying to fix Seama as well.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agomtd: use tabs for indents
rmilecki [Mon, 9 May 2016 07:51:45 +0000 (07:51 +0000)]
mtd: use tabs for indents

This makes code style consistent across the whole file.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
8 years agoncurses: remove libncurses, provide it via libncursesw
Felix Fietkau [Mon, 9 May 2016 12:49:33 +0000 (14:49 +0200)]
ncurses: remove libncurses, provide it via libncursesw

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agometadata.pl: add support for selecting packages available only via PROVIDES
Felix Fietkau [Mon, 9 May 2016 12:48:49 +0000 (14:48 +0200)]
metadata.pl: add support for selecting packages available only via PROVIDES

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: add workaround to rebuild vdso-o32.so.dbg
Stijn Tintel [Mon, 9 May 2016 00:30:38 +0000 (02:30 +0200)]
kernel: add workaround to rebuild vdso-o32.so.dbg

Building for octeon fails with

  'arch/mips/vdso/vdso-o32.so.dbg' already contains a '.MIPS.abiflags'
  section

if the file already exists from a prior build.

Use the same workaround as the one for vdso.so.dbg committed in
9eb155353a5f5137ec85a5b5b0287af63c544710.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
8 years agotoolchain: gcc: fix build with GCC 6
Matthias Schiffer [Sun, 8 May 2016 21:10:13 +0000 (23:10 +0200)]
toolchain: gcc: fix build with GCC 6

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
8 years agotools: mkimage: sync include/linux/compiler*.h with u-boot master
Matthias Schiffer [Sun, 8 May 2016 20:06:51 +0000 (22:06 +0200)]
tools: mkimage: sync include/linux/compiler*.h with u-boot master

Fixes build with GCC 6.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
8 years agotools: pkg-config: fix build with GCC 6
Matthias Schiffer [Sun, 8 May 2016 13:53:14 +0000 (15:53 +0200)]
tools: pkg-config: fix build with GCC 6

Fixes the following error:

gdate.c: In function ‘g_date_strftime’:
gdate.c:2497:7: error: format not a string literal, format string not checked [-Werror=format-nonliteral]
       tmplen = strftime (tmpbuf, tmpbufsize, locale_format, &tm);
       ^~~~~~

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
8 years agomt76: update to the latest version
Felix Fietkau [Thu, 5 May 2016 18:42:43 +0000 (19:42 +0100)]
mt76: update to the latest version

Fixes a tx locking error and adds a pci id

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agomt76: fix rebuild on CONFIG_PACKAGE_MAC80211_MESH changes
Felix Fietkau [Thu, 5 May 2016 18:39:21 +0000 (19:39 +0100)]
mt76: fix rebuild on CONFIG_PACKAGE_MAC80211_MESH changes

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agobuild: add support for specifying extra package dependencies for prepared, configured...
Felix Fietkau [Thu, 5 May 2016 18:37:40 +0000 (19:37 +0100)]
build: add support for specifying extra package dependencies for prepared, configured and built

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agotoolchain: rename OpenWrt into LEDE
Alexander Couzens [Thu, 5 May 2016 17:33:03 +0000 (19:33 +0200)]
toolchain: rename OpenWrt into LEDE

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
8 years agosdk: rename OpenWrt into LEDE
Alexander Couzens [Thu, 5 May 2016 17:33:02 +0000 (19:33 +0200)]
sdk: rename OpenWrt into LEDE

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
8 years agoimagebuilder: rename OpenWrt into LEDE
Alexander Couzens [Thu, 5 May 2016 17:33:01 +0000 (19:33 +0200)]
imagebuilder: rename OpenWrt into LEDE

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
8 years agotools: make-ext4fs: fix build regression on mac os x
Felix Fietkau [Thu, 5 May 2016 17:47:55 +0000 (18:47 +0100)]
tools: make-ext4fs: fix build regression on mac os x

Including sys/sysmacros.h is not portable

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agobase-files: evaluate uci-defaults on run-time installations
Daniel Golle [Fri, 29 Apr 2016 11:34:44 +0000 (11:34 +0000)]
base-files: evaluate uci-defaults on run-time installations

Packages may install scripts into /etc/uci-defaults to be executed once
after installation, usually at the first boot of the target. This works
fine if the package was installed to the rootfs during build or using
the ImageBuilder.
If the package is installed using opkg during run-time uci-defaults
were applied only after a reboot of the device. Avoid the need to
reboot by evaluting the package's uci-defaults in default-postinst.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agoopenssl: Update to version 1.0.2h
Michal Hrusecky [Wed, 4 May 2016 11:53:27 +0000 (13:53 +0200)]
openssl: Update to version 1.0.2h

Bump to the latest version, fixes several security issues:
 * CVE-2016-2107, CVE-2016-2105, CVE-2016-2106, CVE-2016-2109, CVE-2016-2176
More details at https://www.openssl.org/news/openssl-1.0.2-notes.html

Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
8 years agofirewall3: fix mark rules for local traffic, fix race condition
Jo-Philipp Wich [Mon, 2 May 2016 17:46:23 +0000 (18:46 +0100)]
firewall3: fix mark rules for local traffic, fix race condition

Update to latest HEAD in order to fix MARK rule generation for local traffic,
also fix a possible race condition during firewall start.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agolibiconv: add all ASCII aliases
Gergely Kiss [Mon, 2 May 2016 00:46:33 +0000 (02:46 +0200)]
libiconv: add all ASCII aliases

This patch adds missing ASCII aliases to the libiconv stub in order to avoid conversion errors like https://github.com/openwrt/packages/issues/2373

Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
8 years agoxtables-addons: Avoid redefinition of SHRT_MAX in lua packet script
Hans Dedecker [Mon, 2 May 2016 09:57:59 +0000 (11:57 +0200)]
xtables-addons: Avoid redefinition of SHRT_MAX in lua packet script

Patch Lua packet script defines SHRT_MAX which is already defined in <linux/kernel.h> and
is included indirectly by lauxlib.h. Fix the redefintion as it leads to compile failure
on systems which treat macro redefinition as an error

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agosigning: remove unatteded build key and use current keyring instead
Jo-Philipp Wich [Sat, 30 Apr 2016 18:39:23 +0000 (20:39 +0200)]
signing: remove unatteded build key and use current keyring instead

Remove the public unatteded buildkey from the opkg package to avoid
having hardcoded keys in tree. Use the external keyring package instead
which can be easily updated by users.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agofstools: fix snapshot support
John Crispin [Fri, 29 Apr 2016 01:41:48 +0000 (03:41 +0200)]
fstools: fix snapshot support

Signed-off-by: John Crispin <john@phrozen.org>
8 years agofstools: update to latest git HEAD
John Crispin [Fri, 29 Apr 2016 01:49:45 +0000 (03:49 +0200)]
fstools: update to latest git HEAD

fixes snapshot support

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobase-files: fix group/user settings after sysupgrade
John Crispin [Fri, 29 Apr 2016 01:30:52 +0000 (03:30 +0200)]
base-files: fix group/user settings after sysupgrade

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobase-files: split user/group addition code into a function
John Crispin [Fri, 29 Apr 2016 01:13:40 +0000 (03:13 +0200)]
base-files: split user/group addition code into a function

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoscripts: add "r" to revision
John Crispin [Fri, 29 Apr 2016 01:04:16 +0000 (03:04 +0200)]
scripts: add "r" to revision

343c3be45451e4a11f03109bd6cb1dd9061ec5eb accidentially removed the "r"

Signed-off-by: John Crispin <john@phrozen.org>
8 years agofstools: update to latest git HEAD
John Crispin [Wed, 27 Apr 2016 01:37:00 +0000 (03:37 +0200)]
fstools: update to latest git HEAD

this adds the remount command to the block tool

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobase-files: add new public key used by unattended builds
John Crispin [Wed, 27 Apr 2016 00:20:35 +0000 (02:20 +0200)]
base-files: add new public key used by unattended builds

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobase-files: add a conditional dependency to lede-keyring
John Crispin [Tue, 26 Apr 2016 23:52:02 +0000 (01:52 +0200)]
base-files: add a conditional dependency to lede-keyring

Signed-off-by: John Crispin <john@phrozen.org>
8 years agolede-keyring: add the developer public keyring
John Crispin [Tue, 26 Apr 2016 23:50:04 +0000 (01:50 +0200)]
lede-keyring: add the developer public keyring

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoinclude: add lede git server url
John Crispin [Tue, 26 Apr 2016 23:33:14 +0000 (01:33 +0200)]
include: add lede git server url

Signed-off-by: John Crispin <john@phrozen.org>
8 years agokernel: add a workaround to rebuild vdso.so.dbg after genvdso
Jo-Philipp Wich [Fri, 29 Apr 2016 07:53:09 +0000 (09:53 +0200)]
kernel: add a workaround to rebuild vdso.so.dbg after genvdso

Currently the build fails with

  'arch/mips/vdso/vdso.so.dbg' already contains a '.MIPS.abiflags' section

if the file already exists from a prior build.

Add a makefile rule to force the rebuild of vdso.so.dbg if genvdso has
has been changed to workaround the failure.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoscripts: avoid hard-coded paths in scripts
Iblis Lin [Thu, 28 Apr 2016 12:34:13 +0000 (20:34 +0800)]
scripts: avoid hard-coded paths in scripts

Signed-off-by: Iblis Lin <e196819@hotmail.com>
8 years agoppp: Add ppp-mod-passwordfd subpackage to ppp
Hans Dedecker [Wed, 27 Apr 2016 09:14:02 +0000 (11:14 +0200)]
ppp: Add ppp-mod-passwordfd subpackage to ppp

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agodnsmasq: Add conntrack support in the full variant
Hans Dedecker [Wed, 27 Apr 2016 09:14:01 +0000 (11:14 +0200)]
dnsmasq: Add conntrack support in the full variant

Conntrack support reads the connection track mark associated with
incoming DNS queries and sets the same mark value on the upstream
forwarded DNS query. This can be usefull to track traffic generated
by dnsmasq to associate it with the clients who generate the queries,
usefull for bandwidth accouting and firewall.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agodropbear: Add procd interface triggers when interface config is specified
Hans Dedecker [Wed, 27 Apr 2016 09:14:00 +0000 (11:14 +0200)]
dropbear: Add procd interface triggers when interface config is specified

A dropbear instance having an interface config won't start if the interface is down as no
IP address is available.
Adding interface triggers for each configured interface executing the dropbear reload script
will start the dropbear instance when the interface is up.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agoiproute2: Add package for nstat utility
Hans Dedecker [Wed, 27 Apr 2016 09:13:59 +0000 (11:13 +0200)]
iproute2: Add package for nstat utility

Add support for the command line utility nstat displaying network statistics

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agodropbear: Make utmp and putuline support configurable via seperate config options
Hans Dedecker [Wed, 27 Apr 2016 09:13:58 +0000 (11:13 +0200)]
dropbear: Make utmp and putuline support configurable via seperate config options

Utmp support tracks who is currenlty logged in by logging info to the file /var/run/utmp (supported by busybox)
Putuline support will use the utmp structure to write to the utmp file

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agonetifd: Add configurable DHCP release behavior
Hans Dedecker [Thu, 28 Apr 2016 11:40:17 +0000 (13:40 +0200)]
netifd: Add configurable DHCP release behavior

Make sending a DHCP release configurable when the client exits allowing to clean up
IP/mac state info in intermediate devices.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agobcm53xx: add m25p80 workaround for SPI flash writing problems
Rafał Miłecki [Wed, 27 Apr 2016 21:20:45 +0000 (21:20 +0000)]
bcm53xx: add m25p80 workaround for SPI flash writing problems

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 49264

8 years agomediatek: sync and patches add support for several boards
John Crispin [Wed, 27 Apr 2016 08:58:15 +0000 (08:58 +0000)]
mediatek: sync and patches add support for several boards

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 49263

8 years agobcm53xx: support SPI-NOR on dual flash devices
Rafał Miłecki [Wed, 27 Apr 2016 08:04:30 +0000 (08:04 +0000)]
bcm53xx: support SPI-NOR on dual flash devices

We need it to access NVRAM.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 49262

8 years agobcm53xx: switch to m25p80 and drop bcm53xxspiflash
Rafał Miłecki [Tue, 26 Apr 2016 17:08:53 +0000 (17:08 +0000)]
bcm53xx: switch to m25p80 and drop bcm53xxspiflash

For some time now m25p80 supports 32 MiB flashes and we just needed to
patch spi-nor to support JEDEC incompatible w25q128. Also by switching
to m25p80 we gain accelerated SPI flash reads.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 49260

8 years agobcm53xx: support JEDEC incompatible w25q128 in spi-nor
Rafał Miłecki [Tue, 26 Apr 2016 12:36:34 +0000 (12:36 +0000)]
bcm53xx: support JEDEC incompatible w25q128 in spi-nor

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 49259

8 years agoxtables-addons: Fix Lua packet script implementation
Hans Dedecker [Thu, 28 Apr 2016 09:18:56 +0000 (11:18 +0200)]
xtables-addons: Fix Lua packet script implementation

lua_packet_segment parameter start has type char pointer; in function lua_tg
it's assigned an uint16 value generating compiler warnings obviously indicating
posssible seg fault problems. Fix the issue by using the correct skb functions
so the parameter points to the position inside the sk_buff

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Stijn Cleynhens <stijn.cleynhens@gmail.com>
8 years agolantiq: fix xway image building
Jo-Philipp Wich [Tue, 26 Apr 2016 23:13:34 +0000 (01:13 +0200)]
lantiq: fix xway image building

Commit 8c130dd (lantiq: use new image build process for some images) broke
image generation for the xway target since the generated macros reference not
existing WBMRA.dts and WBMRB.dts files leading to the following build error:

  mips-openwrt-linux-musl-cpp: error: ../dts/WBMRA.dts: No such file or directory
  mips-openwrt-linux-musl-cpp: warning: '-x assembler-with-cpp' after last input file has no effect
  mips-openwrt-linux-musl-cpp: fatal error: no input files

Previously both the WBMRA and WBMRB profiles shared a common WBMR DT since
the only difference is the embedded firmware kmod package.

Extend the lantiqImage macro to optionally support specifying a different
DTS file and use this facility to let the both WBMR profiles reference the
correct device tree file.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agopackage: remove duplicate lines from otrx and nvram makefiles
Jo-Philipp Wich [Tue, 26 Apr 2016 21:28:17 +0000 (23:28 +0200)]
package: remove duplicate lines from otrx and nvram makefiles

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agopackage: flag further target specific packages as nonshared
Jo-Philipp Wich [Tue, 26 Apr 2016 21:09:12 +0000 (23:09 +0200)]
package: flag further target specific packages as nonshared

Add nonshared flag to package depending on specific targets or subtargets as
there's no guarantee otherwise that they'll be available in the shared repo.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agopackage: mark nvram and otrx nonshared as they're target specific
Jo-Philipp Wich [Tue, 26 Apr 2016 21:09:12 +0000 (23:09 +0200)]
package: mark nvram and otrx nonshared as they're target specific

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobrcm2708: removes backported patch (linux-4.4.7)
Álvaro Fernández Rojas [Tue, 26 Apr 2016 14:41:41 +0000 (16:41 +0200)]
brcm2708: removes backported patch (linux-4.4.7)

This regression was introduced while rebasing LEDE's commits over the latest
OpenWrt repository.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agoat91: fix SAMA5D3 subtarget
Jo-Philipp Wich [Mon, 25 Apr 2016 12:54:07 +0000 (14:54 +0200)]
at91: fix SAMA5D3 subtarget

Add required architecture overrides to enable SAMA5 boards in Kconfig, add
resulting missing symbols, reorder config and remove unrelated XEN setting.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agox86: remove old references to kmod-acpi-button
Jo-Philipp Wich [Mon, 25 Apr 2016 12:14:47 +0000 (14:14 +0200)]
x86: remove old references to kmod-acpi-button

The kmod-acpi-button functionality is included in the kernel where needed
and the corresponding kmod package has been deleted long ago, therfor drop
the remaining references now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agouml: revert accidentally committed change
Jo-Philipp Wich [Mon, 25 Apr 2016 12:09:05 +0000 (14:09 +0200)]
uml: revert accidentally committed change

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agotools: fix make_ext4fs build with recent glibc
Jo-Philipp Wich [Mon, 25 Apr 2016 11:41:43 +0000 (13:41 +0200)]
tools: fix make_ext4fs build with recent glibc

Update to latest make_ext4fs Git HEAD to fix build with recent glibc version
which does not implicitely includes sysmacros.h anymore.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobrcm2708: update linux 4.4 patches to latest version
Álvaro Fernández Rojas [Sun, 24 Apr 2016 11:03:39 +0000 (13:03 +0200)]
brcm2708: update linux 4.4 patches to latest version

As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agobrcm2708-gpu-fw: update to latest version
Álvaro Fernández Rojas [Sun, 24 Apr 2016 11:00:11 +0000 (13:00 +0200)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agokernel: fix ip6_tunnel compilation
Álvaro Fernández Rojas [Sun, 24 Apr 2016 10:56:07 +0000 (12:56 +0200)]
kernel: fix ip6_tunnel compilation

Replace undefined iph for ip_hdr(skb)

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agokernel: update kernel 4.4 to version 4.4.8
Álvaro Fernández Rojas [Sun, 24 Apr 2016 09:32:17 +0000 (11:32 +0200)]
kernel: update kernel 4.4 to version 4.4.8

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agoopkg: fix use-after-free with duplicate packages on the command line
Jo-Philipp Wich [Sat, 23 Apr 2016 12:03:50 +0000 (14:03 +0200)]
opkg: fix use-after-free with duplicate packages on the command line

When the same package file is specified multiple times on the opkg install
command line, the name pointer on the argv array becomes stale after the
package structures have been merged, leading to invalid memory accesses
upon install.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoimagebuilder: use correct package directory when bundling kmods and libc
Jo-Philipp Wich [Fri, 22 Apr 2016 10:22:57 +0000 (12:22 +0200)]
imagebuilder: use correct package directory when bundling kmods and libc

The libc and kernel package files moved since the introduction of shared
packages and the changed output directory layout. This causes the generated
ImageBuilder archive to lack the necessary "libc" and "kernel" meta packages,
leading to opkg install errors later on.

Use the FeedPackageDir macro to figure out the proper source directory to use.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agopackage: fix toolchain ipk flags
Jo-Philipp Wich [Fri, 22 Apr 2016 10:20:47 +0000 (12:20 +0200)]
package: fix toolchain ipk flags

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude: remove unused FeedPackageDir macro arguments
Jo-Philipp Wich [Fri, 22 Apr 2016 10:02:53 +0000 (12:02 +0200)]
include: remove unused FeedPackageDir macro arguments

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agolinux: kmod-e100: use preconverted firmware files
Jo-Philipp Wich [Thu, 21 Apr 2016 14:39:59 +0000 (16:39 +0200)]
linux: kmod-e100: use preconverted firmware files

Instead of converting the firmware files ourselves, use the files
generated during the normal kernel build process. This fixes packaging
kmod-e100 in the SDK environment.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agosdk: bundle required firmware files
Jo-Philipp Wich [Thu, 21 Apr 2016 14:34:39 +0000 (16:34 +0200)]
sdk: bundle required firmware files

Bundle all firmware files which have been built along with the kernel to fix
packaging of kmods in the SDK environment that rely on in-tree firmwares,
specifically kmod-e100.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude: bin/ dir was not created
John Crispin [Tue, 19 Apr 2016 14:08:18 +0000 (16:08 +0200)]
include: bin/ dir was not created

explicitly create the bin dir

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobase-files: remove ununsed login.sh
John Crispin [Tue, 19 Apr 2016 18:42:34 +0000 (20:42 +0200)]
base-files: remove ununsed login.sh

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobase-files: Allow to disable failsafe mode
John Crispin [Tue, 19 Apr 2016 08:07:35 +0000 (10:07 +0200)]
base-files: Allow to disable failsafe mode

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
8 years agoimage / basefiles: make console password configurable
John Crispin [Mon, 18 Apr 2016 19:53:07 +0000 (21:53 +0200)]
image / basefiles: make console password configurable

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
8 years agobase-files: fix error message during boot
John Crispin [Mon, 11 Apr 2016 09:58:57 +0000 (11:58 +0200)]
base-files: fix error message during boot

preinit spews out this message

"cat: can't open '/proc/device-tree/model': No such file or directory"

Signed-off-by: John Crispin <john@phrozen.org>
8 years agosdk: do not exclude ccache executable
Jo-Philipp Wich [Mon, 18 Apr 2016 10:28:16 +0000 (12:28 +0200)]
sdk: do not exclude ccache executable

Change tar exclude pattern to skip ccache directory contents but not the
ccache executable itself.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agosdk: fix generation of base feed url
Jo-Philipp Wich [Sun, 17 Apr 2016 19:50:31 +0000 (21:50 +0200)]
sdk: fix generation of base feed url

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agotarget: globally remove ARCH_PACKAGES overrides
Jo-Philipp Wich [Sun, 17 Apr 2016 17:55:09 +0000 (19:55 +0200)]
target: globally remove ARCH_PACKAGES overrides

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude/target.mk: disambiguate package architecture
Jo-Philipp Wich [Sun, 17 Apr 2016 17:50:53 +0000 (19:50 +0200)]
include/target.mk: disambiguate package architecture

Add $ARCH and $CPU_SUBTYPE to the package architecture strings to differentiate
low and big endian targets as well as extended instructions sets like NEON
or DSP2.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobrcm2708: implement sysupgrade image check
Christian Lamparter [Thu, 7 Apr 2016 16:26:51 +0000 (18:26 +0200)]
brcm2708: implement sysupgrade image check

Implement a crude but functioning sysupgrade image check for the
Raspberry Pi. The code only checks if the master boot record boot
signature (0x55aa) is present in the first 512-bytes at the correct
location. This can prevent the odd bricking of a system when flashing
the wrong file.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
8 years agobrcm2708-gpu-fw: improve package version and release
Álvaro Fernández Rojas [Sat, 16 Apr 2016 09:27:56 +0000 (11:27 +0200)]
brcm2708-gpu-fw: improve package version and release

Use git revision as package release and date for package version.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agobrcmfmac43430-firmware: improve package version and release
Álvaro Fernández Rojas [Sat, 16 Apr 2016 09:25:56 +0000 (11:25 +0200)]
brcmfmac43430-firmware: improve package version and release

Use git revision as package release and date for package version.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agobrcm2708: add missing config symbols
Álvaro Fernández Rojas [Sat, 16 Apr 2016 09:23:56 +0000 (11:23 +0200)]
brcm2708: add missing config symbols

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
8 years agoinclude: fix nonshared flag handling
Jo-Philipp Wich [Fri, 15 Apr 2016 08:26:36 +0000 (10:26 +0200)]
include: fix nonshared flag handling

Fix nonshared flag handling to properly deal with source packages defining
both kmod and non-kmod ipks.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoopenssl: fix wrong build target strings
Jo-Philipp Wich [Fri, 15 Apr 2016 05:40:31 +0000 (07:40 +0200)]
openssl: fix wrong build target strings

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agouclibc++: add hack to fix failing patch
Jo-Philipp Wich [Thu, 14 Apr 2016 16:27:12 +0000 (18:27 +0200)]
uclibc++: add hack to fix failing patch

One of the patched files, include/unwind-cxx.h, contains windows newlines
which lead to the following failure:

  Applying ./patches/006-eabi_fix.patch using plaintext:
  patching file include/typeinfo
  patching file include/unwind-cxx.h
  Hunk #1 FAILED at 173 (different line endings).
  Hunk #2 FAILED at 181 (different line endings).

Add a fixup command to the prepare phase which normalizes the line endings
before applying source patches.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoimagebuilder: fix standalone operation
Jo-Philipp Wich [Tue, 12 Apr 2016 23:46:09 +0000 (01:46 +0200)]
imagebuilder: fix standalone operation

Fix standalone ImageBuilders after the package layout rework.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agopackage: flag essential components as nonshared
Jo-Philipp Wich [Wed, 6 Apr 2016 20:38:47 +0000 (22:38 +0200)]
package: flag essential components as nonshared

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude/kernel.mk: flag kmod packages as nonshared by default
Jo-Philipp Wich [Wed, 6 Apr 2016 20:37:58 +0000 (22:37 +0200)]
include/kernel.mk: flag kmod packages as nonshared by default

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude/version.mk: rework repository url handling
Jo-Philipp Wich [Tue, 12 Apr 2016 22:31:15 +0000 (00:31 +0200)]
include/version.mk: rework repository url handling

- Add %A placeholder for substituting the package architecture
- Change %U placeholder to refer to the toplevel repository URL
- Construct package feed URLs relative to the toplevel one to match new layout

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude: choose package output directory based on repository info
Jo-Philipp Wich [Wed, 6 Apr 2016 19:55:44 +0000 (21:55 +0200)]
include: choose package output directory based on repository info

Use the new repository metadata field to choose the output directory of the
final package archives.

Non-sharable packages will be placed in the per-target package directory
while the rest will be placed in a per-repository sub directory within the
$OUTPUT_DIR/packages/$CPU_TYPE/ prefix.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoglobal: introduce ALL_NONSHARED symbol
Jo-Philipp Wich [Wed, 13 Apr 2016 15:24:12 +0000 (17:24 +0200)]
global: introduce ALL_NONSHARED symbol

Introduce a new symbol ALL_NONSHARED which selects all non-sharable packages
by default. This option is mainly intented for buildbot setups to build the
target dependant software subset only.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoscripts: remove "Package-Subdir" metadata handling
Jo-Philipp Wich [Wed, 13 Apr 2016 13:38:17 +0000 (15:38 +0200)]
scripts: remove "Package-Subdir" metadata handling

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude: remove now unused PACKAGE_SUBDIR variable
Jo-Philipp Wich [Wed, 13 Apr 2016 13:37:34 +0000 (15:37 +0200)]
include: remove now unused PACKAGE_SUBDIR variable

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoscripts: metadata: use the new "Repository" field
Jo-Philipp Wich [Wed, 13 Apr 2016 13:33:53 +0000 (15:33 +0200)]
scripts: metadata: use the new "Repository" field

Switch to the new "Repository" metadata field to populate tmp/.packagesubdirs

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude/package-dumpinfo.mk: introduce Repository values
Jo-Philipp Wich [Wed, 13 Apr 2016 13:28:13 +0000 (15:28 +0200)]
include/package-dumpinfo.mk: introduce Repository values

Introduce a new dumpinfo field "Repository" which contains the name of the
shared repository where the package will be hosted in. The name is chosen
according to the following rules:

 - Name of the feed directory for any feed package, e.g. "Repository: luci" for
   "feeds/luci/applications/luci-app-firewall/Makefile"
 - The value "base" for any other, sharable package
 - Unset for any package flagged PKG_FLAGS:=nonshared

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoinclude/target.mk: default to CPU_TYPE for the package architecture
Jo-Philipp Wich [Wed, 6 Apr 2016 19:53:19 +0000 (21:53 +0200)]
include/target.mk: default to CPU_TYPE for the package architecture

Use the more specific CPU_TYPE designation as default package architecture
and only fall back to ARCH if no specific CPU_TYPE is set.

This means that e.g. ar71xx packages will use "74kc" as architecture,
not "mips" which is a precondition for sharing packages between targets.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agorules.mk: introduce new variable OUTPUT_DIR
Jo-Philipp Wich [Wed, 6 Apr 2016 19:49:15 +0000 (21:49 +0200)]
rules.mk: introduce new variable OUTPUT_DIR

Introduce a new variable OUTPUT_DIR which refers to the parent bin/ directory
without the architecture specific component.

Also construct the BIN_DIR variable based on OUTPUT_DIR now and add both target
and subtarget components to it to prevent different subtargets from
overwriting each others files in bin/.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>