Stefan Roese [Fri, 9 Feb 2007 12:20:21 +0000 (13:20 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Stefan Roese [Wed, 7 Feb 2007 15:51:08 +0000 (16:51 +0100)]
[PATCH] Update some AMCC 4xx board config files (set initrd_high)
Some boards that can have more than 768MBytes of SDRAM need to
set "initrd_high", so that the initrd can be accessed by the
Linux kernel.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 3 Feb 2007 06:53:41 +0000 (07:53 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Stefan Roese [Fri, 2 Feb 2007 11:44:22 +0000 (12:44 +0100)]
[PATCH] Correctly display PCI arbiter en-/disabled on some 4xx boards
Previously the strapping DCR/SDR was read to determine if the internal PCI
arbiter is enabled or not. This strapping bit can be overridden, so now
the current status is read from the correct DCR/SDR register.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 2 Feb 2007 11:42:08 +0000 (12:42 +0100)]
[PATCH] Change configuration output of Sycamore, Yellowstone & Rainier
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 1 Feb 2007 12:22:41 +0000 (13:22 +0100)]
[PATCH] Remove PCI-PNP configuration from Sequoia/Rainier config file
When PCI PNP is enabled the pci pnp configuration routine is called
which sets the PCI_CACHE_SIZE_LINE to 8. This seems to generate some
problems with some PCI cards. For now disable the PCI PNP configuration.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 31 Jan 2007 15:56:10 +0000 (16:56 +0100)]
[PATCH] Update 440EPx/440GRx cpu detection
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Wed, 31 Jan 2007 15:38:04 +0000 (16:38 +0100)]
[PATCH] Update esd cpci5200 files
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Stefan Roese [Wed, 31 Jan 2007 15:37:34 +0000 (16:37 +0100)]
[PATCH] Add support for esd mecp5200 board
Signed-off-by: Reinhard Arlt <reinhard.arlt@esd-electronics.com>
Stefan Roese [Wed, 31 Jan 2007 11:38:50 +0000 (12:38 +0100)]
[PATCH] Remove unneccessary yellowstone board config file
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Tue, 30 Jan 2007 16:32:15 +0000 (17:32 +0100)]
Merge with /home/sr/git/u-boot/denx-merge-sr
Stefan Roese [Tue, 30 Jan 2007 16:06:10 +0000 (17:06 +0100)]
[PATCH] Update Sequoia (440EPx) config file
The config file now handles the 2nd target, the Rainier (440GRx)
evaluation board better. Additionally the PPC input clock was
adjusted to match the correct value of 33.0 MHz.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 30 Jan 2007 16:04:19 +0000 (17:04 +0100)]
[PATCH] Merge Yosemite & Yellowstone board ports
Now the AMCC eval boards Yosemite (440EP) and Yellowstone (440GR)
share one config file and all board specific files. This way we
don't have to maintain two different sets of files for nearly
identical boards.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 30 Jan 2007 14:01:49 +0000 (15:01 +0100)]
[PATCH] Update Prodrive SCPU (PDNB3 variant) board
SCPU doesn't use redundant environment in flash.
Signed-off-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Tue, 30 Jan 2007 13:38:21 +0000 (14:38 +0100)]
Merge with /home/sr/git/u-boot/denx-merge-sr
Stefan Roese [Tue, 30 Jan 2007 11:51:07 +0000 (12:51 +0100)]
[PATCH] alpr: Update alpr board config file
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Tue, 30 Jan 2007 11:46:55 +0000 (12:46 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Wolfgang Denk [Mon, 29 Jan 2007 23:50:40 +0000 (00:50 +0100)]
LPC2292 SODIMM port coding style cleanup.
Gary Jennejohn [Wed, 24 Jan 2007 11:16:56 +0000 (12:16 +0100)]
Add port for the lpc2292sodimm evaluation board from EmbeddedArtists
Wolfgang Denk [Wed, 24 Jan 2007 09:26:47 +0000 (10:26 +0100)]
Merge with /home/tur/proj/idmr/u-boot
Bartlomiej Sieka [Tue, 23 Jan 2007 16:22:06 +0000 (17:22 +0100)]
[iDMR] Add MTD and JFFS2 support, also add default partition definition.
Bartlomiej Sieka [Tue, 23 Jan 2007 13:21:14 +0000 (14:21 +0100)]
[iDMR] Flash driver on initialisation write-protects some sectors,
currently sectors 0-3. Sector 3 does not need to be protected, though
(U-boot occupies sectors 0-1 and the environment sector 2). This commit
fixes this, i.e., only sectors 0-2 are protected.
Bartlomiej Sieka [Tue, 23 Jan 2007 13:11:22 +0000 (14:11 +0100)]
[iDMR] Using MII-related commands on iDRM board doesn't work now (e.g.,
"mii device" results in "Unexpected exception"). Fixing this properly
requires some clean-up in the FEC drivers infrastructure for ColdFire, so
this commit disables MII commads for now.
Bartlomiej Sieka [Tue, 23 Jan 2007 12:25:22 +0000 (13:25 +0100)]
[ColdFire MCF5271 family] Add CPU detection based on the value of Chip
Identification Register (CIR).
Wolfgang Denk [Fri, 19 Jan 2007 22:08:39 +0000 (23:08 +0100)]
Minor code cleanup.
Wolfgang Denk [Fri, 19 Jan 2007 21:56:23 +0000 (22:56 +0100)]
Merge with /home/hs/SC3/u-boot-dev
Heiko Schocher [Fri, 19 Jan 2007 18:57:10 +0000 (19:57 +0100)]
[PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 19 Jan 2007 17:05:26 +0000 (18:05 +0100)]
[PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver
if you must swap the bytes between reading/writing.
(Needed for the SC3 board)
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Fri, 19 Jan 2007 11:06:32 +0000 (12:06 +0100)]
Merge with /home/hs/SC3/u-boot-dev
Stefan Roese [Thu, 18 Jan 2007 15:05:47 +0000 (16:05 +0100)]
[PATCH] Add support for Prodrive SCPU (PDNB3 variant) board
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 18 Jan 2007 10:54:52 +0000 (11:54 +0100)]
[PATCH] Update Prodrive P3Mx support
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 18 Jan 2007 10:48:10 +0000 (11:48 +0100)]
[PATCH] Add missing Taishan config file
Signed-off-by: Stefan Roese <sr@denx.de>
Heiko Schocher [Thu, 18 Jan 2007 10:28:51 +0000 (11:28 +0100)]
[PATCH] Fix: Compilerwarnings for SC3 board.
The EBC Configuration Register is now by CFG_EBC_CFG definable
Added JFFS2 support for the SC3 board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Stefan Roese [Thu, 18 Jan 2007 09:27:26 +0000 (10:27 +0100)]
Merge with /home/stefan/git/u-boot/denx-merge-sr
Stefan Roese [Thu, 18 Jan 2007 09:25:34 +0000 (10:25 +0100)]
[PATCH] Add support for AMCC Taishan PPC440GX eval board
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Thu, 18 Jan 2007 08:30:29 +0000 (09:30 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Wolfgang Denk [Tue, 16 Jan 2007 17:30:50 +0000 (18:30 +0100)]
Raname solidcard3 into sc3; add redundant env for sc3
Stefan Roese [Tue, 16 Jan 2007 14:49:14 +0000 (15:49 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Wolfgang Denk [Tue, 16 Jan 2007 11:46:35 +0000 (12:46 +0100)]
Update default environment for Solidcard3
Wolfgang Denk [Mon, 15 Jan 2007 12:41:04 +0000 (13:41 +0100)]
Merge with /home/hs/SC3/u-boot
Some code cleanup.
Wolfgang Denk [Mon, 15 Jan 2007 11:56:52 +0000 (12:56 +0100)]
Merge with /home/hs/MAN/u-boot-dev
Wolfgang Denk [Mon, 15 Jan 2007 11:48:05 +0000 (12:48 +0100)]
Merge with /home/sr/git/u-boot/denx-merge-sr
Stefan Roese [Mon, 15 Jan 2007 08:46:29 +0000 (09:46 +0100)]
[PATCH] Fix 440SPe rev B detection from previous patch
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Mon, 15 Jan 2007 07:01:42 +0000 (08:01 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Heiko Schocher [Sun, 14 Jan 2007 12:35:31 +0000 (13:35 +0100)]
[FIX] correct I2C Writes for the LM81 Sensor.
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Sat, 13 Jan 2007 10:25:08 +0000 (11:25 +0100)]
Merge with /home/sr/git/u-boot/denx-merge-sr
Wolfgang Denk [Sat, 13 Jan 2007 10:17:35 +0000 (11:17 +0100)]
Merge with /home/git/u-boot
Wolfgang Denk [Sat, 13 Jan 2007 10:17:10 +0000 (11:17 +0100)]
Undo commit
3033ebb2: reset command does not take any arguments
Haiying Wang's modification to the reset command was broken, undo it.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Stefan Roese [Sat, 13 Jan 2007 07:01:31 +0000 (08:01 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx-merge-sr
Stefan Roese [Sat, 13 Jan 2007 07:01:03 +0000 (08:01 +0100)]
[PATCH] Update 440SP(e) cpu revisions
Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 13 Jan 2007 06:59:56 +0000 (07:59 +0100)]
[PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 13 Jan 2007 06:59:19 +0000 (07:59 +0100)]
[PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed
Now the board revision and the current PCI bus speed are printed after
the board message.
Also the EBC initialising is now done via defines in the board config
file.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 13 Jan 2007 06:57:51 +0000 (07:57 +0100)]
[PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed
Now the board revision and the current PCI bus speed are printed after
the board message.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 13 Jan 2007 06:18:38 +0000 (07:18 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Heiko Schocher [Thu, 11 Jan 2007 14:44:44 +0000 (15:44 +0100)]
Added support for the SOLIDCARD III board from Eurodesign
Signed-off-by: Heiko Schocher <hs@denx.de>
Reinhard Thies [Wed, 10 Jan 2007 13:41:14 +0000 (14:41 +0100)]
Adjusted default environment for cam5200 board.
Detlev Zundel [Wed, 10 Jan 2007 15:36:51 +0000 (16:36 +0100)]
Merge with /home/m8/git/u-boot/
Wolfgang Denk [Wed, 10 Jan 2007 14:35:52 +0000 (15:35 +0100)]
Update CHANGELOG
Wolfgang Denk [Wed, 10 Jan 2007 14:34:43 +0000 (15:34 +0100)]
Merge with /home/mk/11-cmb1920/u-boot#4upstream
Wolfgang Denk [Wed, 10 Jan 2007 00:28:39 +0000 (01:28 +0100)]
Fix auto_update for MCC200 board.
The invocation of do_auto_update() is moved to the end of the
misc_init_r() function, after the flash mappings have been
initialized. Please find attached a patch that implements that
change.
Also correct the decoding of the keypad status. With this update, the
key that will trigger the update is Column 2, Row 2.
Marian Balakowicz [Tue, 9 Jan 2007 23:26:15 +0000 (00:26 +0100)]
CAM5200 flash driver modifications:
- use CFI driver (replaces custom flash driver) for main 'cam5200' target
- add second build target 'cam5200_niosflash' which still uses custom driver
Stefan Roese [Tue, 9 Jan 2007 15:33:38 +0000 (16:33 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Markus Klotzbuecher [Tue, 9 Jan 2007 15:02:48 +0000 (16:02 +0100)]
SPC1920: cleanup memory contoller setup
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:14 +0000 (14:57 +0100)]
Fix the cpu speed setup to work with all boards.
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:13 +0000 (14:57 +0100)]
SPC1920: add support for the FM18L08 Ramtron FRAM
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:13 +0000 (14:57 +0100)]
SPC1920: update the HPI register addresses to work with the second
generation of hardware
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:13 +0000 (14:57 +0100)]
Miscellanious spc1920 related cleanups
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:12 +0000 (14:57 +0100)]
SPC1920 GO/NOGO led should be set to color red in U-Boot
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:12 +0000 (14:57 +0100)]
Add support for the DS3231 RTC
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:11 +0000 (14:57 +0100)]
SMC1 uses external CLK4 instead of BRG on spc1920
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:10 +0000 (14:57 +0100)]
Update the SPC1920 CMB PLD driver
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:10 +0000 (14:57 +0100)]
Add / enable I2C support on the spc1920 board
Markus Klotzbuecher [Tue, 9 Jan 2007 13:57:10 +0000 (14:57 +0100)]
Add support for the tms320671x host port interface (HPI)
Wolfgang Denk [Sat, 6 Jan 2007 23:13:11 +0000 (00:13 +0100)]
Prepare for release 1.2.0
Stefan Roese [Sat, 6 Jan 2007 14:58:09 +0000 (15:58 +0100)]
[PATCH] 44x: Fix problem with DDR controller setup (refresh rate)
This patch fixes a problem with an incorrect setup for the refresh
timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 6 Jan 2007 14:56:13 +0000 (15:56 +0100)]
[PATCH] Update ALPR board files
This update brings the ALPR board support to the newest version.
It also fixes a problem with the NAND driver.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Sat, 6 Jan 2007 12:11:52 +0000 (13:11 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Stefan Roese [Fri, 5 Jan 2007 10:46:05 +0000 (11:46 +0100)]
[PATCH] nand: Fix problem with oobsize calculation
Here the description from Brian Brelsford <Brian_Brelsford@dell.com>:
The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part
returns a 0x15. In the code fragment below bits [1:0] determine the
page size, it is ANDed via "(extid & 0x3)" then shifted out. The
next field is also ANDed with 0x3. However this is a one bit field
as defined in the Hynix and Samsung parts in the 4th ID byte that
determins the oobsize, not a two bit field. It works on Samsung as
bits[3:2] are 01. However for the Hynix there is a 11 in these two
bits, so the oob size gets messed up.
I checked the correct linux code and the suggested fix from Brian is
also available in the linux nand mtd driver.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 5 Jan 2007 09:40:50 +0000 (10:40 +0100)]
Merge with /home/stefan/git/u-boot/denx-merge-sr
Stefan Roese [Fri, 5 Jan 2007 09:40:36 +0000 (10:40 +0100)]
[PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx)
This fix will make the MAL burst disabling patch for the Linux
EMAC driver obsolete.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 5 Jan 2007 09:38:05 +0000 (10:38 +0100)]
[PATCH] Add DDR2 optimization code for Sequoia (440EPx) board
This code will optimize the DDR2 controller setup on a board specific
basis.
Note: This code doesn't work right now on the NAND booting image for the
Sequoia board, since it doesn't fit into the 4kBytes for the SPL image.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 5 Jan 2007 09:23:09 +0000 (10:23 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Wolfgang Denk [Thu, 4 Jan 2007 01:05:51 +0000 (02:05 +0100)]
Merge with /home/tur/proj/v38b/u-boot
Stefan Roese [Thu, 28 Dec 2006 18:09:07 +0000 (19:09 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Bartlomiej Sieka [Thu, 28 Dec 2006 18:08:21 +0000 (19:08 +0100)]
Few V38B changes:
- fix a typo in V38B config file
- move watchdog initialisation earlier in the boot process
- add "wdt=off" to default kernel command line (disables kernel watchdog)
Wolfgang Denk [Wed, 27 Dec 2006 00:26:13 +0000 (01:26 +0100)]
Fix bug in adaption of Stefano Babic's CFI driver patch.
Wolfgang Denk [Sun, 24 Dec 2006 00:42:57 +0000 (01:42 +0100)]
Minor code cleanup.
Wolfgang Denk [Sun, 24 Dec 2006 00:33:32 +0000 (01:33 +0100)]
Merge with /home/wd/git/u-boot/master
Wolfgang Denk [Sun, 24 Dec 2006 00:30:04 +0000 (01:30 +0100)]
Merge with /home/hs/TQ/u-boot-dev
Stefano Babic [Mon, 11 Dec 2006 23:22:42 +0000 (00:22 +0100)]
Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode)
Stefan Roese [Fri, 22 Dec 2006 13:29:40 +0000 (14:29 +0100)]
[PATCH] Fix sequoia flash autodetection (finally correct)
Now 32MByte and 64MByte FLASH is know to work and other
configurations should work too.
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 22 Dec 2006 13:21:36 +0000 (14:21 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Wolfgang Denk [Fri, 22 Dec 2006 09:30:26 +0000 (10:30 +0100)]
Minor code cleanup; update CHANGELOG.
Heiko Schocher [Thu, 21 Dec 2006 16:17:02 +0000 (17:17 +0100)]
Added support for the TQM8272 board from TQ
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Thu, 21 Dec 2006 15:14:48 +0000 (16:14 +0100)]
[PATCH] Add support for the UC101 board from MAN.
Signed-off-by: Heiko Schocher <hs@denx.de>
Stefan Roese [Thu, 21 Dec 2006 13:50:33 +0000 (14:50 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git
Bartlomiej Sieka [Tue, 19 Dec 2006 23:29:43 +0000 (00:29 +0100)]
Fix to make the baudrate changes immediate for the MCF52x2 family.
Bartlomiej Sieka [Tue, 19 Dec 2006 23:27:32 +0000 (00:27 +0100)]
Preliminary support for the iDMR board (ColdFire).
Andrei Safronov [Fri, 8 Dec 2006 15:23:08 +0000 (16:23 +0100)]
automatic update mechanism
Grant Likely [Fri, 1 Dec 2006 19:02:30 +0000 (20:02 +0100)]
Merge ... git+ssh://sr@pollux.denx.org/home/sr/git/u-boot/denx/.git