Zoltan Herpai [Sun, 7 Sep 2014 23:38:03 +0000 (23:38 +0000)]
tools: build dosfstools and mtools for sunxi
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42435
Felix Fietkau [Sun, 7 Sep 2014 09:45:32 +0000 (09:45 +0000)]
ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable. The existing code
however advertieses gigabit capability in the link status word. If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link. This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.
In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.
So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit. This patch implements the
former solution.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
SVN-Revision: 42432
Jonas Gorski [Sun, 7 Sep 2014 09:38:13 +0000 (09:38 +0000)]
mac80211: enable DFS support for ath9k/10k by default
The DFS pattern detector now supports all three regions; ETSI, FCC and
JP, so there is no reason to not have it enabled anymore.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42431
Jonas Gorski [Sun, 7 Sep 2014 09:38:10 +0000 (09:38 +0000)]
toolchain/binutils: do not install host libiberty.a into target lib dir
Binutils target build will pick it up and break build on e.g. arm:
libtool: link: arm-openwrt-linux-uclibcgnueabi-gcc -shared .libs/archive.o .libs/archures.o .libs/bfd.o .libs/bfdio.o .libs/bfdwin.o .libs/cache.o .libs/coffgen.o .libs/corefile.o .libs/format.o .libs/init.o .libs/libbfd.o .libs/opncls.o .libs/reloc.o .libs/section.o .libs/syms.o .libs/targets.o .libs/hash.o .libs/linker.o .libs/srec.o .libs/binary.o .libs/tekhex.o .libs/ihex.o .libs/stabs.o .libs/stab-syms.o .libs/merge.o .libs/dwarf2.o .libs/simple.o .libs/compress.o .libs/verilog.o .libs/elf32-arm.o .libs/elf32.o .libs/elf-nacl.o .libs/elf-vxworks.o .libs/elf.o .libs/elflink.o .libs/elf-attrs.o .libs/elf-strtab.o .libs/elf-eh-frame.o .libs/dwarf1.o .libs/elf32-gen.o .libs/cpu-arm.o -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/usr/lib -L/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib -L/mnt/dl/slave/at91/build/build_dir/target-arm_arm926ej-s_uClibc-0.9.33.2_eabi/binutils-2.24/bfd/../libiberty/pic -liberty -lz -march=armv5te -mtune=arm926ej-s -mfloat-abi=soft -Wl,-lc -Wl,--as-needed -Wl,-lm -Wl,--no-as-needed -Wl,-soname -Wl,libbfd-2.24.so -o .libs/libbfd-2.24.so
/mnt/dl/slave/at91/build/staging_dir/toolchain-arm_arm926ej-s_gcc-4.8-linaro_uClibc-0.9.33.2_eabi/lib/libiberty.a: could not read symbols: File format not recognized
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42430
Felix Fietkau [Sat, 6 Sep 2014 17:51:48 +0000 (17:51 +0000)]
ar71xx: re-enable descriptor splitting on ar716x after the previous bugfixes (#13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42429
Felix Fietkau [Sat, 6 Sep 2014 17:51:44 +0000 (17:51 +0000)]
ar71xx: fix off-by-one error in packet descriptor splitting (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42428
Felix Fietkau [Sat, 6 Sep 2014 17:51:39 +0000 (17:51 +0000)]
ar71xx: on ar716x, split ethernet packets in 512 byte chunks instead of 256 (improves performance) (patch from #13072)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42427
Felix Fietkau [Sat, 6 Sep 2014 17:51:35 +0000 (17:51 +0000)]
atheros: remove linux 3.10
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42426
Zoltan Herpai [Sat, 6 Sep 2014 15:59:06 +0000 (15:59 +0000)]
sunxi: bump kernel to 3.14.16
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42425
Zoltan Herpai [Sat, 6 Sep 2014 15:57:08 +0000 (15:57 +0000)]
sunxi: update pcDuino3 profile to the new u-boot
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42424
Zoltan Herpai [Sat, 6 Sep 2014 15:23:30 +0000 (15:23 +0000)]
sunxi: update Bananapi profile to the new u-boot
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42423
Zoltan Herpai [Sat, 6 Sep 2014 15:18:40 +0000 (15:18 +0000)]
uboot-sunxi: bump to 2014.04
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42422
Nicolas Thill [Fri, 5 Sep 2014 22:02:09 +0000 (22:02 +0000)]
uml: bump to 3.14.16
Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 42421
Felix Fietkau [Thu, 4 Sep 2014 11:25:04 +0000 (11:25 +0000)]
uclient: update to the latest version, fixes some crash issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42419
Florian Fainelli [Wed, 3 Sep 2014 03:11:25 +0000 (03:11 +0000)]
at91: build images for AT91SAMA5D3XPLAINED
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42418
Florian Fainelli [Wed, 3 Sep 2014 03:11:11 +0000 (03:11 +0000)]
at91: add SAMA5D3 subtarget
Add a subtarget for Atmel's SAMA5D3 Cortex-A5 based SoCs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42417
Florian Fainelli [Wed, 3 Sep 2014 03:10:59 +0000 (03:10 +0000)]
at91: move legacy Kconfig options to subtarget
Some Kconfig options are only relevant for the legacy platforms, move
them where they belong
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42416
Florian Fainelli [Wed, 3 Sep 2014 03:10:47 +0000 (03:10 +0000)]
at91: switch to 3.14
We need a new kernel version to support Cortex-A5 based platforms such
as SAMA5GD3.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42415
Florian Fainelli [Wed, 3 Sep 2014 03:10:18 +0000 (03:10 +0000)]
at91: add 3.14 support
Add support for Linux 3.14 for the Atmel's AT91 platform.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42414
Florian Fainelli [Wed, 3 Sep 2014 03:09:51 +0000 (03:09 +0000)]
at91: move 3.10 specific files and patches
In preparation for adding 3.14 kernel support, move files and patches to
a separate per-version directory since some of them will have
incompatible changes (e.g: dts)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42413
Florian Fainelli [Wed, 3 Sep 2014 03:09:36 +0000 (03:09 +0000)]
at91: add Kconfig symbol for CONFIG_USB_ATMEL_USBA
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42412
Florian Fainelli [Wed, 3 Sep 2014 03:09:24 +0000 (03:09 +0000)]
at91: add CONFIG_USB_OHCI_HCD_AT91 to usb-ohci
The at91 OHCI driver has a separate Kconfig symbol with newer kernels,
include it.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42411
Florian Fainelli [Wed, 3 Sep 2014 03:09:14 +0000 (03:09 +0000)]
at91: fix typo on Calao
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42410
Florian Fainelli [Wed, 3 Sep 2014 03:09:03 +0000 (03:09 +0000)]
include: add Cortex-A5 CPU_TYPE
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42409
Florian Fainelli [Wed, 3 Sep 2014 03:08:51 +0000 (03:08 +0000)]
at91: create a legacy subtarget
In preparation for adding SAMA5D3 support, move the legacy ARMv5 based
platforms to a separate subtarget.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42408
John Crispin [Tue, 2 Sep 2014 21:39:40 +0000 (21:39 +0000)]
mdns: update to latest git head
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42407
Felix Fietkau [Tue, 2 Sep 2014 21:06:35 +0000 (21:06 +0000)]
mtd: disable trx_check() for ar71xx, fixes a regression introduced in r42403
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42405
Felix Fietkau [Tue, 2 Sep 2014 17:13:42 +0000 (17:13 +0000)]
mtd: Fix trx check after partition rename ("linux" to "firmware")
On brcm47xx (Huawei E970), I noticed that sysupgrade now tries to flash trx images which don't fit into the flash, resulting in non-booting system.
I found that mtd does trx size checking only when flashing to a partition called "linux". This patch changes this to be "firmware".
This matches the following patch which changed partition name in bcm47xxpart.c driver to "firmware":
commit
86b4d5ef68ca77ff6724ebb9bddd6b93239c87fc
Author: hauke <hauke@
3c298f89-4303-0410-b956-
a3cf2f4a3e73>
Date: Sun Dec 1 16:32:32 2013 +0000
brcm47xx: use "firmware" partition name
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 38973
Signed-off-by: Mathias Adam <m.adam--openwrt@adamis.de>
SVN-Revision: 42403
Felix Fietkau [Tue, 2 Sep 2014 17:00:46 +0000 (17:00 +0000)]
omap: remove 3.12 kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42401
Felix Fietkau [Tue, 2 Sep 2014 16:44:40 +0000 (16:44 +0000)]
cns3xxx: support isolated PCI interrupts on newer Laguna PCBs
The cns3xxx uses irq61 for pcie0_intr which in the case of a PCIe-to-PCI
bridge ends up combining INTA/B/C/D on a single ARM CPU interrupt. This is
not optimal when you have multiple cores. To overcome this limitation an
enhancement was made on newer Laguna PCB's that support miniPCI cards
to route the INTA/B/C/D signals to unique external ARM CPU interrupts which
can help balance CPU core utilization and in some cases increase overall
system performance or responsiveness.
For more details see:
http://trac.gateworks.com/wiki/multicoreprocessing#PCIInterruptsteering
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 42400
Felix Fietkau [Mon, 1 Sep 2014 22:34:37 +0000 (22:34 +0000)]
sdk: keep $(STAGING_DIR)/usr/bin, at least curl needs it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42397
John Crispin [Mon, 1 Sep 2014 13:19:32 +0000 (13:19 +0000)]
mac80211: rt2x00: fix of ht20/ht40 switching fix
r42348 uses a wrong register
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 42349
John Crispin [Mon, 1 Sep 2014 11:40:38 +0000 (11:40 +0000)]
mac80211: rt2x00 correctly set ht20/ht40 filter
Simple patch to correct ht20/ht40 switching. Tested with rt3290/rt3352/rt5350
Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
SVN-Revision: 42348
Felix Fietkau [Sun, 31 Aug 2014 13:09:01 +0000 (13:09 +0000)]
netifd: update to the latest version, adds interface cleanup fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42345
Felix Fietkau [Sun, 31 Aug 2014 12:26:26 +0000 (12:26 +0000)]
netifd: update to the latest version, fixes proto-shell teardown after renew
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42344
Felix Fietkau [Sun, 31 Aug 2014 12:06:32 +0000 (12:06 +0000)]
Add 'subversion' build dependency to README
Fixes #17725.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
SVN-Revision: 42343
Felix Fietkau [Sun, 31 Aug 2014 12:03:43 +0000 (12:03 +0000)]
nettle: disable mips16 support to improve performance
Signed-off-by: Nikos Mavrogiannopoulos <nmav@gnutls.org>
SVN-Revision: 42341
Felix Fietkau [Sun, 31 Aug 2014 11:06:31 +0000 (11:06 +0000)]
imagebuilder: remove postinst files before generating image
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42339
Jonas Gorski [Sat, 30 Aug 2014 11:02:22 +0000 (11:02 +0000)]
binutils: link libbfd and libopcodes dynamically again
Build libbfd and libopcodes as shared libraries, else they get linked
statically into every binary, increasing each binary size by ~650kB.
Reduces binutils package size to old expected values.
Fixes #17060.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 42337
John Crispin [Sat, 30 Aug 2014 09:59:30 +0000 (09:59 +0000)]
ipx806x: bump to 3.14.16
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42336
John Crispin [Sat, 30 Aug 2014 09:59:18 +0000 (09:59 +0000)]
target: set myself as maintainer
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42335
John Crispin [Sat, 30 Aug 2014 09:32:58 +0000 (09:32 +0000)]
ipq806x: Add support for IPQ806x chip family
Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=
0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.
All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.
Support is currently limited to AP148 board but can be extended to other
platforms in the future.
These changes do not cover ethernet connectivity.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 42334
Felix Fietkau [Sat, 30 Aug 2014 09:11:41 +0000 (09:11 +0000)]
ar71xx: disable ethernet descriptor splitting for now, as it seems to cause tx hangs in some setups
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42333
Florian Fainelli [Sat, 30 Aug 2014 00:32:05 +0000 (00:32 +0000)]
kirkwood: fix typos on DEBUG_LL_UART_*
We were prompted for which DEBUG_LL_UART implementation we want, fix the
typos such that the build continues.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42332
Felix Fietkau [Fri, 29 Aug 2014 21:10:39 +0000 (21:10 +0000)]
ar71xx: select m25p80 support instead of spi support where used by mach files (#17699)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42331
Felix Fietkau [Fri, 29 Aug 2014 20:41:01 +0000 (20:41 +0000)]
mac80211: fix crash when unloading drivers (#17706)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42329
Felix Fietkau [Fri, 29 Aug 2014 19:42:08 +0000 (19:42 +0000)]
ar71xx: split packets into multiple descriptors on ar716x
This improves performance when doing concurrent rx/tx on a single
ethernet MAC, e.g. when routing between VLANs.
Fixes #13072
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42328
John Crispin [Fri, 29 Aug 2014 18:36:29 +0000 (18:36 +0000)]
procd: run the mdns register outside the sub shell container
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42327
John Crispin [Fri, 29 Aug 2014 18:16:41 +0000 (18:16 +0000)]
dropbear: add mdns support to the init.d script
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42326
John Crispin [Fri, 29 Aug 2014 18:16:32 +0000 (18:16 +0000)]
mdns: update to latest git
* ipv6
* 4 bugs in the dns parser
* service announcement
* tx goodbye support
* proper handling of rx goodbye
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42325
John Crispin [Fri, 29 Aug 2014 18:16:24 +0000 (18:16 +0000)]
procd: update to latest git HEAD
this adds a interafce.update trigger and mdns service registration helpers
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42324
Felix Fietkau [Fri, 29 Aug 2014 11:37:28 +0000 (11:37 +0000)]
tools/libtool: add missing dependency on m4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42322
John Crispin [Thu, 28 Aug 2014 09:19:56 +0000 (09:19 +0000)]
ralink: DIR-645 picks up incorrect MAC address in DTS file
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42321
John Crispin [Thu, 28 Aug 2014 06:27:57 +0000 (06:27 +0000)]
dnsmasq: Make the --dhcp-host logic easier to understand
Use an if/else statement to cover the two different syntaxes. Add
comments explaining what the end results should look like.
This patch should not change the script's output.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
SVN-Revision: 42320
John Crispin [Thu, 28 Aug 2014 06:27:53 +0000 (06:27 +0000)]
dnsmasq: Fix hosts file format when MAC address is not specified
An entry like this in /etc/config/dhcp:
config 'host'
option 'name' 'pc2'
option 'ip' '192.168.100.56'
option 'dns' '1'
results in a /tmp/hosts/dhcp entry that looks like this:
192.168.100.56 .lan
Obviously it should say "pc2.lan".
This happens because $name is set to "" in order to support the MAC-less
syntax: "--dhcp-host=lap,192.168.0.199". Fix this by reordering the
operations. Also, refuse to add a DNS entry if the hostname or IP is
missing.
Fixes #17683
Reported-by: Kostas Papadopoulos <kpapad75@travelguide.gr>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
SVN-Revision: 42319
John Crispin [Thu, 28 Aug 2014 06:27:49 +0000 (06:27 +0000)]
dnsmasq: Create rDNS records for LuCI "Hostnames"
LuCI creates "domain" UCI config sections, which the dnsmasq init file
then, currently, translates into "address" config lines. This is not
the correct usage of "address" (see r36943), and also causes rDNS
records to not be created. This patches dnsmasq.init to utilize the
additional hosts file introduced in r40799 for such domain names,
resolving both issues.
Signed-off-by: Tyler Fenby <tylerf@securecominc.com>
SVN-Revision: 42318
John Crispin [Thu, 28 Aug 2014 06:27:45 +0000 (06:27 +0000)]
ar71xx: add Support for RB2011UiAS-2HnD
SVN-Revision: 42317
John Crispin [Thu, 28 Aug 2014 06:27:41 +0000 (06:27 +0000)]
lantiq: BTHOMEHUBV2B use bigger mtd partition for kernel
The bb-rc3 image for the BTHOMEHUBV2B is too big for its
mtd partition. This patch corrects the partition sizes in
the device tree. This patch should really go in before
bb-final, otherwise the BTHOMEHUBV2B images won't be useable.
I do apologise for not spotting this straight away.
Many thanks,
Ben
Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>
SVN-Revision: 42316
John Crispin [Thu, 28 Aug 2014 06:05:36 +0000 (06:05 +0000)]
ramips: unbreak i2c for 3.14
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42315
Luka Perkov [Wed, 27 Aug 2014 17:14:09 +0000 (17:14 +0000)]
kirkwood: refresh kernel config
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42314
Zoltan Herpai [Wed, 27 Aug 2014 12:09:46 +0000 (12:09 +0000)]
sunxi: initial 3.14 patchset
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 42313
Felix Fietkau [Wed, 27 Aug 2014 09:20:28 +0000 (09:20 +0000)]
tools/bc: add missing dependency on bison
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42309
Felix Fietkau [Wed, 27 Aug 2014 09:20:18 +0000 (09:20 +0000)]
tools/flex: disable building shared libfl.so
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42308
Nicolas Thill [Wed, 27 Aug 2014 08:49:55 +0000 (08:49 +0000)]
kernel: revert [40784]
SVN-Revision: 42307
John Crispin [Tue, 26 Aug 2014 13:12:12 +0000 (13:12 +0000)]
ralink: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42305
John Crispin [Tue, 26 Aug 2014 13:11:56 +0000 (13:11 +0000)]
kernel: add package for huawei ncm modems
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42304
Felix Fietkau [Tue, 26 Aug 2014 12:32:51 +0000 (12:32 +0000)]
target/toolchain: strip files, leave out the initial gcc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42302
Felix Fietkau [Tue, 26 Aug 2014 12:15:50 +0000 (12:15 +0000)]
build: override hardcoded paths to bison and m4 to make the SDK more relocatable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42300
John Crispin [Tue, 26 Aug 2014 09:36:59 +0000 (09:36 +0000)]
umbim: update to latest git
add pincode sanitization and handling for authproto/user/pass
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42299
John Crispin [Tue, 26 Aug 2014 08:39:55 +0000 (08:39 +0000)]
usbmode: update to latest git
this adds support for a new mode MBIM that auto detects the bConfigurationValue.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42298
Luka Perkov [Mon, 25 Aug 2014 21:50:49 +0000 (21:50 +0000)]
imx6: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42297
Luka Perkov [Mon, 25 Aug 2014 21:50:48 +0000 (21:50 +0000)]
kernel: 3.14: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 42296
Luka Perkov [Mon, 25 Aug 2014 21:50:47 +0000 (21:50 +0000)]
kernel: 3.14: backport for igb driver resolving a driver crash
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 42295
Luka Perkov [Mon, 25 Aug 2014 21:50:43 +0000 (21:50 +0000)]
imx6: kernel: backport upstream fix for IMX6DL 800MHz speed grade
A previous backported patch that adds freq/voltage operating points for the
IMX6DL processor can cause hang/crash (general instability) on IMX6DL
processors in the industrial/automative speed grades as they don't support
1GHz operation.
This adds another backported patch from mainline that uses IMX6 fuse settings
to properly remove invalid operating points for the particular CPU grade used.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 42294
John Crispin [Mon, 25 Aug 2014 16:31:13 +0000 (16:31 +0000)]
ralink: the mt7620 evb has a usb port
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42293
John Crispin [Mon, 25 Aug 2014 16:31:09 +0000 (16:31 +0000)]
ralink: a few 3.14 related fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42292
John Crispin [Mon, 25 Aug 2014 16:31:05 +0000 (16:31 +0000)]
ralink: fix mt7620 ohci 3.14
the ohci phy was not reset properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42291
John Crispin [Mon, 25 Aug 2014 16:31:01 +0000 (16:31 +0000)]
ralink: fix mt7620 ohci 3.10
the ohci phy was not reset properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42290
John Crispin [Mon, 25 Aug 2014 16:30:57 +0000 (16:30 +0000)]
ralink: mt7620 has obchi/ehci and not dwc2
fix the default package selection
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42289
John Crispin [Mon, 25 Aug 2014 16:30:52 +0000 (16:30 +0000)]
kernel: add ohci-platform.ko for 3.11+
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42288
John Crispin [Mon, 25 Aug 2014 16:30:44 +0000 (16:30 +0000)]
kernel: add own Kconfig for OpenWrt mtdsplit drivers
There are pretty many OpenWrt patches against mtd subsystem resulting
in a bit of mess and growing maintenance cost.
My idea is to use an extra "mtdsplit" directory with OpenWrt specific
files (including Kconfig).
This is the first step to achieve this. This patch adds a "mtdsplit"
directory with Kconfig and replaces 4 patches with a single one.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42287
Jo-Philipp Wich [Mon, 25 Aug 2014 12:39:34 +0000 (12:39 +0000)]
uhttpd: do not configure TLS parameters if libustream-ssl is not present
A quite frequent problem after sysupgrading from an older, SSL enabled build
is that ustream-ssl is not installed so uhttpd fails to come up again due to
https listening directives in the preserved configuration.
Skip key/cert and ssl listen options when libustream-ssl.so is not present.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42284
John Crispin [Mon, 25 Aug 2014 06:36:06 +0000 (06:36 +0000)]
PKG_CHECK_FORMAT_SECURITY: add a menuconfig option, disable by default
The idea is still to enable it by default at some point
I've tested all ar71xx packages (except oldpackages) using CONFIG_ALL=y
Failing packages have been marked with PKG_CHECK_FORMAT_SECURITY:=0 for now
I can test more targets but i have no idea which are the most used
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
SVN-Revision: 42282
John Crispin [Mon, 25 Aug 2014 06:36:01 +0000 (06:36 +0000)]
mac80211/rt2x00: allow disabling bands through dts
Add dts property ralink,2ghz and ralink,5ghz
e.g. disable 2ghz band:
wmac@
10180000 {
status = "okay";
ralink,2ghz = <0>;
}
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 42281
John Crispin [Mon, 25 Aug 2014 06:35:58 +0000 (06:35 +0000)]
ar71xx: use ETH_ALEN for consistency
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 42280
John Crispin [Mon, 25 Aug 2014 06:35:54 +0000 (06:35 +0000)]
ar71xx: enable sysupgrade for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
SVN-Revision: 42279
John Crispin [Mon, 25 Aug 2014 06:35:50 +0000 (06:35 +0000)]
package/*: remove useless explicit set of function returncode
somebody started to set a function returncode in the validation
stuff and everybody copies it, e.g.
myfunction()
{
fire_command
return $?
}
a function automatically returns with the last returncode,
so we can safely remove the command 'return $?'. reference:
http://tldp.org/LDP/abs/html/exit-status.html
"The last command executed in the function or script determines the exit status."
Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 42278
John Crispin [Mon, 25 Aug 2014 06:35:46 +0000 (06:35 +0000)]
ramips: enable second SPI for VoCore
This patch enables the second SPI as spidev and also fixes some typos.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 42277
John Crispin [Mon, 25 Aug 2014 06:35:42 +0000 (06:35 +0000)]
ramips: second spi device on rt5350
This is based on Jon Smirl's patch with the following changes:
- Set CS polarity as low by default.
- Add support for changing CS polarity.
- Add support for changing LSB/MSB.
- Add support for changing SPI mode.
- Fix indentations.
I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed.
Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 42276
Steven Barth [Mon, 25 Aug 2014 06:11:53 +0000 (06:11 +0000)]
odhcp6c: enable softwires support by default
SVN-Revision: 42274
Jo-Philipp Wich [Sun, 24 Aug 2014 21:42:26 +0000 (21:42 +0000)]
iwinfo: properly decode SSIDs when scanning through wpa_supplicant
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 42273
Hauke Mehrtens [Sun, 24 Aug 2014 15:57:49 +0000 (15:57 +0000)]
bcm53xx: update bcma device tree intergeneration and fix nvram parsing
This fixes lots of sparse and checkpatch errors and extends the
documentation.
This also fixes a problem in the nvram parser, it now detects the
correct nvram on my Netgear R6250.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 42272
Steven Barth [Sun, 24 Aug 2014 08:12:57 +0000 (08:12 +0000)]
odhcpd: fix static lease behavior with dhcpv4
SVN-Revision: 42270
Florian Fainelli [Sat, 23 Aug 2014 02:42:03 +0000 (02:42 +0000)]
kernel: remove obsolete 322-ppc4xx-crypto-compile-fix.patch patches
Upstream commit
c11eede powerpc: add missing explicit OF includes for ppc was
included in 3.13 and onwards, hence making those patches obsolete.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 42263
John Crispin [Fri, 22 Aug 2014 19:02:30 +0000 (19:02 +0000)]
umbim: add netifd proto handler for mbim style lte modems
tested on vodafone k5105
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42262
John Crispin [Fri, 22 Aug 2014 14:19:07 +0000 (14:19 +0000)]
base-files: properly generate the ula
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42261
Hauke Mehrtens [Thu, 21 Aug 2014 21:11:04 +0000 (21:11 +0000)]
bcm53xx: add bcm53xxspiflash driver for SPI flashes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42260
Hauke Mehrtens [Thu, 21 Aug 2014 21:10:29 +0000 (21:10 +0000)]
bcm53xx: backport more spi-nor patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 42259
Felix Fietkau [Thu, 21 Aug 2014 19:12:38 +0000 (19:12 +0000)]
uclient: update to latest version, fixes HTTP keepalive issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42257
Felix Fietkau [Thu, 21 Aug 2014 19:12:34 +0000 (19:12 +0000)]
xtables-addons: update to version 2.5
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42256
projects / oweals / openwrt.git / log