Add OPENSSL_VERSION_AT_LEAST

added macro to create version number
use the macro to build OPENSSL_VERSION_AT_LEAST(maj,min,fix) so that
customers of libssl (such as ruby-openssl) do not need to be so aware of
openssl version numbers.
includes updates to ssl(7) and OPENSSL_VERSION_NUMBER(3) man page

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5212)
(cherry picked from commit 3c5a61dd0f9d9a9eac098419bcaf47d1c296ca81)

Remove "dummy" BIO create and destroy functions

They aren't needed if all they do is set bio->init = 1 and zero other
fields that are already zeroed

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5223)

(cherry picked from commit 94f1c9379c3ed4b088718b35d0dd807d619d50c5)

BIO: at the end of BIO_new, declare the BIO inited if no create method present

Without this, every BIO implementation is forced to have a create
method, just to set bio->init = 1.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5223)

(cherry picked from commit 7f55808fe723c146428415a470ed42331548007b)

Update CHANGES with info about SSL_OP_NO_RENGOTIATION

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4901)

Add the SSL_OP_NO_RENEGOTIATION option to 1.1.0

This is based on a heavily modified version of commit db0f35dda by Todd
Short from the master branch.

We are adding this because it used to be possible to disable reneg using
the flag SSL3_FLAGS_NO_RENEGOTIATE_CIPHERS in 1.0.2. This is no longer
possible because of the opacity work.

A point to note about this is that if an application built against new
1.1.0 headers (that know about the new option SSL_OP_NO_RENEGOTIATION
option) is run using an older version of 1.1.0 (that doesn't know about
the option) then the option will be accepted but nothing will happen, i.e.
renegotiation will not be prevented. There's probably not much we can do
about that.

Fixes #4739

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4901)

Make sure we check an incoming reneg ClientHello in DTLS

In TLS we have a check to make sure an incoming reneg ClientHello is
acceptable. The equivalent check is missing in the DTLS code. This means
that if a client does not signal the ability to handle secure reneg in the
initial handshake, then a subsequent reneg handshake should be rejected by
the server. In the DTLS case the reneg was being allowed if the the 2nd
ClientHello had a renegotiation_info extension. This is incorrect.

While incorrect, this does not represent a security issue because if
the renegotiation_info extension is present in the second ClientHello it
also has to be *correct*. Therefore this will only work if both the client
and server believe they are renegotiating, and both know the previous
Finished result. This is not the case in an insecure rengotiation attack.

I have also tidied up the check in the TLS code and given a better check
for determining whether we are renegotiating or not.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5191)

Fix strict-warnings build on FreeBSD

The cryptodev engine is only available for OpenBSD and FreeBSD,
but for the OS version-specific checks the OpenBSD macro is not
defined on FreeBSD.  When building with -Werror and -Wundef (enabled
by strict-warnings), the FreeBSD build fails:

crypto/engine/eng_cryptodev.c:47:7: error: 'OpenBSD' is not defined,
evaluates to 0
      [-Werror,-Wundef]
\# if (OpenBSD >= 200112) || ((__FreeBSD_version >= 470101 &&
\# __FreeBSD_versi...
      ^

The reverse case would be true on OpenBSD (__FreeBSD_version would
not be defined), but since the boolean will short-circuit and this
code is only executed on OpenBSD and FreeBSD, and the line is
already pretty long, leave that out for now.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5160)

Don't define OPENSSL_NO_ERR for the command line

It's already in opensslconf.h, which is included where this is relevant.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5188)

(cherry picked from commit 711a8b999e7a0733f349e7f330fa3fa013e995fd)

Remove $no_sse2, as it's just a 'copy' of $disabled{sse2}

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5188)

(cherry picked from commit 0d59958c4999a456531835d0b61ba4eaecceaf86)

Don't break testing when runnins as root

The rehash test broke the test if run by root.  Instead, just skip the
check that requires non-root to be worth it.

Fixes #4387

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5184)

(cherry picked from commit 98ade24200f127a158b60bc736390c587cdd3dfb)

VMS config.com: better handling of arguments

Most of all, this change preserves casing a bit better

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5180)

(cherry picked from commit d4deecc203bf3a7bcc5f31529692f5b668c0c2bc)

Fix some style nits in commit eee8a40

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5173)

(cherry picked from commit df05f155a69b96b174e0e47bc689bf729de684b6)

Check # of arguments for remaining commands.

Backport of https://github.com/openssl/openssl/pull/4201

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5162)

Make the s_server command listen on IPv6 only when requested

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5152)

(cherry picked from commit eee8a40aa5e06841eed6fa8eb4f6109238d59aea)

Fix setting of IPV6_V6ONLY on Windows

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5156)

Fix BN doc

Backport from https://github.com/openssl/openssl/pull/5141

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5151)

Fix signature of min/max proto getter

The getters for min and max proto version wrongly passed NULL instead of
0 as third argument to SSL_ctrl() and SSL_CTX_ctrl(). The third argument
is not used, but the error results in a compiler warning:

warning: passing argument 3 of ‘SSL_CTX_ctrl’ makes integer from pointer without a cast [-Wint-conversion]
int v = SSL_CTX_get_max_proto_version(self->ctx);

See https://github.com/openssl/openssl/pull/4364

Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5128)

(cherry picked from commit 1f82eba718f758757a439e717ea7a5aa8be55f8d)

Fix SSL_CTX_get_{min,max}_proto_version integer conversion warning

When using the SSL_CTX_get_min_min_version macro while compiling with
-Wall, my compiler rightfully complains about this construction:

warning: passing argument 3 of ‘SSL_CTX_ctrl’ makes integer from
pointer without a cast [-Wint-conversion]

These macro's should use 0, instead of NULL, for the third argument,
like most other SSL_CTX_ctrl 'get' wrappers do.

CLA: trivial
Signed-off-by: Steffan Karger <steffan.karger@fox-it.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5099)

(cherry picked from commit 78d0afaa69c2ec662f6c97b47473c2c6a69d636c)

Fix error-path memory leak in asn_mime.c

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5142)

(cherry picked from commit a26dd465b21d8def440c16b6bd90227b03e12e02)

Configure: ensure that a DEPEND generates the correct inclusion directory

We incorrectly assumed that explicit dependencies meant that the
source directory would be added for inclusion.  However, if the
dependent file is generated, it's stored in the build directory, and
that should be used for inclusion rather than the source directory.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5153)

(cherry picked from commit e431bcfabd72163b0ee89674e2face26a349ba9c)

Configure: let INCLUDEs set on binaries "trickle down" to the objects

This ensures that only one set of includes is associated with each
object file, reagardless of where it's used.

For example, if apps/build.info has this:

    SOURCE[openssl]=foo.c
    INCLUDE[openssl]=.. ../include

and test/build.info has this:

    SOURCE[footest]=../apps/foo.c
    INCLUDE[footest]=../include

The inclusion directories used for apps/foo.o would differ depending
on which program's dependencies get generated first in the build file.

With this change, all those INCLUDEs get combined into one set of
inclusion directories tied to the object file.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5153)

(cherry picked from commit 1b5ad51fc9b29d8893d5224f00bb3360f8aca465)

Have EVP_PKEY_asn1_find_str() work more like EVP_PKEY_asn1_find()

EVP_PKEY_asn1_find_str() would search through standard asn1 methods
first, then those added by the application, which EVP_PKEY_asn1_find()
worked the other way around.  Also, EVP_PKEY_asn1_find_str() didn't
handle aliases.

This change brings EVP_PKEY_asn1_find_str() closer to EVP_PKEY_asn1_find().

Fixes #5086

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5137)

(cherry picked from commit 3bf0c3fe31d5339524dae671064cc5fe9e4bda38)

Revert "EVP_PKEY_asn1_add0(): Check that this method isn't already registered"

This reverts commit d85722d31ac9ff0dc54c06cdc8d125acf56ca27a.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5137)

(cherry picked from commit 7203c94e98c9fa76b0859c25b723b2bde4a9059b)

Don't add $(EX_LIBS) to libssl.pc's Libs.private

Since libssl requires libcrypto and libcrypto.pc already has
Libs.private set exactly the same, there's no reason to repeat it in
libssl.pc.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5135)

Add anything specifying a threads library to ex_libs

Even -pthread gets treated that way.  The reason to do this is so it
ends up in 'Libs.private' in libcrypto.pc.

Fixes #3884

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5135)

Don't attempt to use X25519 for ECDSA in speed

Fixes #5090

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5097)

(cherry picked from commit da1a1b5ac417c4e38f7717082d69cb5f0ceda6b9)

Don't crash on a missing Subject in index.txt

An index.txt entry which has an empty Subject name field will cause ca
to crash. Therefore check it when we load it to make sure its not empty.

Fixes #5109

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5114)

(cherry picked from commit 1e05c6d07ff963107286d028f6778d2ccc863a9a)

Don't allow an empty Subject when creating a Certificate

Misconfiguration (e.g. an empty policy section in the config file) can
lead to an empty Subject. Since certificates should have unique Subjects
this should not be allowed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5114)

(cherry picked from commit e505f1e86874acfd98826d64c53bf2ddfd9c1399)

Add a configure option to opt-out secure memory

./config -DOPENSSL_NO_SECURE_MEMORY

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5113)

(cherry picked from commit 154d8c132fbe22a248f95e95ef21f1840451da62)

Update the license end year

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5121)

(cherry picked from commit 7c24f9d21cddd2bb30167153b05168fee7e3cf0b)

Enable TLSProxy tests on Windows

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5096)

Set OPENSSL_ENGINES for Windows

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5108)

(cherry picked from commit 7a6ce9039cb6690aae3cca01f18daab16b8e30d7)

Create one permanent proxy socket per TLSProxy::Proxy instance

On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.

To avoid this scenario, we don't create a new proxy port for each new
client run.  Instead, we create one proxy socket when the proxy object
is created, and close it when destroying that object.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5095)

(cherry picked from commit c7454e1af74b1b99f3f47f782a6ac484c4c55b7f)

Only implement secure malloc if _POSIX_VERSION allows

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit e44c7d02ddac975ec6abff7901e77a0c37f9949d)

The Cygwin gcc doesn't define _WIN32, don't pretend it does

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit 4d3c278c1a4f940e098edac6de3d370b94d1bb8b)

Simplify Cygwin checks, part 1

Because OPENSSL_SYS_CYGWIN will keep OPENSSL_SYS_UNIX defined, there's
no point having checks of this form:

    #if (defined(OPENSSL_SYS_UNIX) || defined(OPENSSL_SYS_CYGWIN))

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit 6ce66ce073b19af46fd94f4eefdb7c4772d7dd6f)

Cygwin is POSIX, don't say it isn't

More to the point, Cygwin is a POSIX API.  In our library, the use of
a POSIX API is marked by defining the macro OPENSSL_SYS_UNIX.
Therefore, that macro shouldn't be undefined when building for Cygwin.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5060)

(cherry picked from commit 33cebb9c0dd6115bc357b5097f7db82b64b10919)

TLSProxy::Proxy: Don't use ReuseAddr on Windows

On Windows, we sometimes see a behavior with SO_REUSEADDR where there
remains lingering listening sockets on the same address and port as a
newly created one.

An easy solution is not to use ReuseAddr on Windows.

Thanks Bernd Edlinger for the suggestion.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5103)

(cherry picked from commit e02d5886636095c26a8bff1bf8344bd0bba7ccff)

TLSProxy::Proxy: don't waste time redirecting STDOUT and STDERR

On Windows, it seems that doing so in a forked (pseudo-)process
sometimes affects the parent, and thereby hides all the results that
are supposed to be seen by the running test framework (the "ok" and
"not ok" lines).

It turns out that our redirection isn't necessary, as the test
framework seems to swallow it all in non-verbose mode anyway.
It's possible that we did need this at some point, but the framework
has undergone some refinement since then...

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5100)

(cherry picked from commit 825038d8c36075488922617e48fc4782afe871d1)

TLSProxy::Proxy:  If we don't support IPv6, force IPv4

We use the first we can of the following IO::Socket modules to create
sockets:

- IO::Socket::INET6
- IO::Socket::IP
- IO::Socket::INET

The last of them doesn't support IPv6, so if that's the one available,
we must force the s_client and s_server processes to use IPv4.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5092)

(cherry picked from commit c44bab084ed139b5e5c3f6b318bf1bf65e04cfa5)

Extend timeout for TLSProxy

I received this error from a TLSProxy test:

Failed to start up server (localhost,4443): Transport endpoint is not
connected

So, extend the timeout before we give up trying to connect to the server.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5088)

(cherry picked from commit 82992a4130e668c14ff66fca26170629b23c4556)

Revert BN_copy() flag copy semantics change

Commit 9f9442918a changed the semantics of BN_copy() to additionally
copy the BN_FLG_CONSTTIME flag if it is set. This turns out to be
ill advised as it has unintended consequences. For example calling
BN_mod_inverse_no_branch() can sometimes return a result with the flag
set and sometimes not as a result. This can lead to later failures if we
go down code branches that do not support constant time, but check for
the presence of the flag.

The original commit was made due to an issue in BN_MOD_CTX_set(). The
original PR fixed the problem in that function, but it was changed in
review to fix it in BN_copy() instead. The solution seems to be to revert
the BN_copy() change and go back to the originally proposed way.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/5080)

(cherry picked from commit 7d461736f7bd3af3c2f266f8541034ecf6f41ed9)

Fix intermittent Windows and Cygwin failures in s_server

The same kind of failure that has already been observed on the
s_client can sometimes also be observed on s_server, so we need to add
the same kind of 50ms delay as was previously added on s_client.

Ref: git commit cb2e10f257a464c6b475b321dd9e4769df84dbf6:

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5079)

(cherry picked from commit d17bdfc26d87097c2c80854fd521b6ecebdf5ebb)

Fix intermittent Cygwin failures in s_client

This was identified for Windows almost two years ago for VC and
msys/mingw.  It seems that Cygwin suffers from the same issue, and
since Cygwin doesn't define OPENSSL_SYS_WINDOWS, we need to make a
special case to have a 50ms pause before closing the TLS connection.

Ref: git commit cb2e10f257a464c6b475b321dd9e4769df84dbf6

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5074)

(cherry picked from commit 27da42d85212f80fc0db02b1cedf1d49fbfb8c43)

Use constant value 1 instead of SHUT_WR in do_server

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5072)

(cherry picked from commit 803141f6100ca8d756928328a262e1dc52daef2d)

Explicitly shut the socket down in s_client

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5072)

(cherry picked from commit 26ec943e020c0db6a25e6d155ba318270eff0fd7)

Catch SIGPIPE in TLSProxy::Proxy::clientstart

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5071)

(cherry picked from commit 438e57a43f096d37bf316869b98780e24596a5e8)

Make data argument const in SSL_dane_tlsa_add

The data argument of SSL_dane_tlsa_add is used read-only, so it
should be const.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5056)

(cherry picked from commit a41a6120cdcb7e883481bc1bed55e7157c9255c4)

Tolerate DTLS alerts with an incorrect version number

In the case of a protocol version alert being sent by a peer the record
version number may not be what we are expecting. In DTLS records with an
unexpected version number are silently discarded. This probably isn't
appropriate for alerts, so we tolerate a mismatch in the minor version
number.

This resolves an issue reported on openssl-users where an OpenSSL server
chose DTLS1.0 but the client was DTLS1.2 only and sent a protocol_version
alert with a 1.2 record number. This was silently ignored by the server.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5018)

(cherry picked from commit 08455bc9b0e69ed5f25c16fc30cc2db57cdca842)

Configure: try to make sure every config target name is unique

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5047)

(cherry picked from commit 225f980d22dfe66aa3945c21609042c32284e61c)

Update copyright years on all files merged since Jan 1st 2018

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5039)

Various small build improvements on mkdef.pl, progs.pl

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4994)

(cherry picked from commit ab307dc645502d025c2760160062d5032da56bf7)

Document OPENSSL_ENGINES environment variable

In apps/engine.pod and crypto/ENGINE_add.pod

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4956)

(cherry picked from commit c81c38cb2786dd308256c55ce8d5337e6a3f14ce)

Fix spelling: adroideabi -> androideabi

CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/5029)

(cherry picked from commit bebef673607b9701bc21a0f7b7dbf92434af2588)

Clean up uClinux targets

The uClinux targets included some attributes that would result in
circular references of CFLAGS and LDCLAGS.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5034)

(cherry picked from commit f720194cbc174806fe1ce9c349edd249d8076c02)

CHANGES: Document the removal of OS390-Unix

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5031)

(cherry picked from commit 4b9e91b02bee0dd114260513cb6a3f28261124b7)

Add fingerprint text, remove MD5

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/4906)
(Cherry-picked from commit 9422d45de2b70cabec5f6e6a5c812e0647e6d3ab)

Corrected 'cms' exit status when key or certificate cannot be opened

A backport of #4997.
Fixes #4996.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/5021)

Stop using unimplemented cipher classes.
Add comments to no longer usable ciphers.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5023)

(cherry picked from commit 643d91fea409b0f010ce990f8f0fac234ae058bc)

Add x509(1) reference

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove old config that used non-exist util script

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5016)

(cherry picked from commit b44a65512a4a0a299f8f817b63df472e74a0007a)

ec/ecp_nistp*.c: sanitize for undefined/implmentation-specific behaviour.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/4974)

(cherry picked from commit 8af7e94d7b720224547efa7e3364857f7f666dd4)

Add comments to NULL func ptrs in bio_method_st

This commit adds comments to bio_method_st definitions where the
function pointers are defined as NULL. Most of the structs have comments
but some where missing and not all consitent.

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4881)

(cherry picked from commit b4ff66223b53ad9d2f5b4efd75bf8d52cc59c8dd)

Fix invalid function type casts.
Rename bio_info_cb to BIO_info_cb.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4943)

Fix a gcc fallthru warning

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4941)

Remove test-runs dir

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4942)

Document the X509_V_FLAG_PARTIAL_CHAIN flag

Also improved documentation of TRUSTED_FIRST

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix more OCSP_resp_get0_signer() nits

Fix a typo for "retrieve" and some indentation.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(cherry picked from commit eb48052ec96a7551391b5955f03f5ef70b3528f6)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

Wrap more of ocspapitest.c in OPENSSL_NO_OCSP

make_dummy_resp() uses OCSP types, and get_cert_and_key() is unused
once make_dummy_resp() is compiled out, so neither can be included
in the build when OCSP is disabled and strict warnings are active.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit cb091295a9ff16f4de1a8b00be444d40ac068d04)

(Merged from https://github.com/openssl/openssl/pull/4723)

Fix coverity-reported errors in ocspapitest

Avoid memory leaks in error paths, and correctly apply
parentheses to function calls in a long if-chain.

Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit b6306d8049b04dca7fa738a86c892c43ba6a5fc4)

(Merged from https://github.com/openssl/openssl/pull/4723)

Fix typo that cause find-doc-nits failure

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(cherry picked from commit b741fcd2ddc4e94faee75a47c241fa136854c81f)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit f1d3de718bc96e70ce76bf2b4ccee128ecbcd100)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

Add OCSP API test executable

Some of the OCSP APIs (such as the recently added OCSP_resp_get0_signer)
do not really merit inclusion in the ocsp(1) utility, but we should still
have unit tests for them.

For now, only test OCSP_resp_get0_signer(), but it should be easy to
add more tests in the future.

Provide an X509 cert and private key in the test's data directory
to use for signing responses, since constructing those on the fly
is more effort than is needed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit 27da13430bfb3c178716cec10e8d5d6134e54f90)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

Add an API to get the signer of an OCSP response

Add a new function OCSP_resp_get0_signer() that looks in the
certs bundled with the response as well as in additional certificates
provided as a function argument, returning the certificate that signed
the given response (if present).

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(cherry picked from commit ce5886dda80b6f60fb30762381506d5c6f2d995c)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4723)

crypto/bio/bss_dgram.c: annotate fallthrough (-Wimplicit-fallthrough)

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4916)

(cherry picked from commit 147167548bb692dc1b772cf4ee1d0917e45b1aff)

Fix leak in ERR_get_state() when OPENSSL_init_crypto() isn't called yet

If OPENSSL_init_crypto() hasn't been called yet when ERR_get_state()
is called, it need to be called early, so the base initialization is
done.  On some platforms (those who support DSO functionality and
don't define OPENSSL_USE_NODELETE), that includes a call of
ERR_set_mark(), which calls this function again.
Furthermore, we know that ossl_init_thread_start(), which is called
later in ERR_get_state(), calls OPENSSL_init_crypto(0, NULL), except
that's too late.
Here's what happens without an early call of OPENSSL_init_crypto():

    => ERR_get_state():
         => CRYPTO_THREAD_get_local():
         <= NULL;
         # no state is found, so it gets allocated.
         => ossl_init_thread_start():
              => OPENSSL_init_crypto():
                   # Here, base_inited is set to 1
                   # before ERR_set_mark() call
                   => ERR_set_mark():
                        => ERR_get_state():
                             => CRYPTO_THREAD_get_local():
                             <= NULL;
                             # no state is found, so it gets allocated!!!!!
                             => ossl_init_thread_start():
                                  => OPENSSL_init_crypto():
                                       # base_inited is 1,
                                       # so no more init to be done
                                  <= 1
                             <=
                             => CRYPTO_thread_set_local():
                             <=
                        <=
                   <=
              <= 1
         <=
         => CRYPTO_thread_set_local()      # previous value removed!
    <=

Result: double allocation, and we have a leak.

By calling the base OPENSSL_init_crypto() early, we get this instead:

    => ERR_get_state():
         => OPENSSL_init_crypto():
              # Here, base_inited is set to 1
              # before ERR_set_mark() call
              => ERR_set_mark():
                   => ERR_get_state():
                        => OPENSSL_init_crypto():
                             # base_inited is 1,
                             # so no more init to be done
                        <= 1
                        => CRYPTO_THREAD_get_local():
                        <= NULL;
                        # no state is found, so it gets allocated
                        # let's assume we got 0xDEADBEEF
                        => ossl_init_thread_start():
                             => OPENSSL_init_crypto():
                                  # base_inited is 1,
                                  # so no more init to be done
                             <= 1
                        <= 1
                        => CRYPTO_thread_set_local():
                        <=
                   <=
              <=
         <= 1
         => CRYPTO_THREAD_get_local():
         <= 0xDEADBEEF
    <= 0xDEADBEEF

Result: no leak.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4913)

(cherry picked from commit aef84bb4efbddfd95d042f3f5f1d362ed7d4faeb)

Fix typo in comment

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4903)

Fix a switch statement fallthrough

SSL_trace() has a case which was inadvertently falling through.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4888)

Useless conf != NULL test

check is already made 10 line above.
clean commented code

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4885)

(cherry picked from commit df364297495e1d7409f1fcb0f4432c8671019cd8)

Make BIO_METHOD struct definitions consistent

I noticed that some of the BIO_METHOD structs are placing the name on
the same line as the type and some don't. This commit places the name
on a separate line for consistency (which looks like what the majority
do)

CLA: trivial

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4878)

(cherry picked from commit 27ab91951c96364351f1ea0652dbf14622440345)

Standardize syntax of sizeof(foo)

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4876)

Correct minor typo in ssl_locl.h comment

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4880)

(cherry picked from commit 6aff543b9bf14bdac7f5385a9e56b8785b30f6d8)

Fix an incoherent test.

Pointer 'o' is set inside a local buffer, so it can't be NULL.
Also fix coding style and add comments

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4754)
(cherry picked from commit cef115ff0ca4255d3decc1dda87c5418a961fd2c)

In apps_startup(), call OPENSSL_init_ssl() rather than OPENSSL_init_crypto()

Otherwise, any command that relies on ssl modules may fail, because
SSL_add_ssl_module() will be called after the config file has already
been loaded.

Fixes #4788

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)

(cherry picked from commit 0488c0bbbe87eee3a800797b91350c653e9f1711)

In OPENSSL_init_ssl(), run the base ssl init before OPENSSL_init_crypto()

IF OPENSSL_init_ssl() is called with the option flag
OPENSSL_INIT_LOAD_CONFIG, any SSL config will be handled wrongly
(i.e. there will be an attempt to load libssl_conf.so or whatever
corresponds to that on non-Unix platforms).  Therefore, at least
SSL_add_ssl_module() MUST be called before OPENSSL_init_crypto() is
called.  The base ssl init does that, plus adds all kinds of ciphers
and digests, which is harmless.

Fixes #4788

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4792)

(cherry picked from commit 0a90a6831e02e00d9043ada635421cfd3da5ffe2)

Remove unicode characters from source

Some compilers react badly to non-ASCII characters

Fixes #4877

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4879)

(cherry picked from commit d68a0eaf45f12392065f3cf716a1a2682d55d3ce)

Fix the buffer sizing in the fatalerrtest

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4868)

Update CHANGES and NEWS for the new release

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test for CVE-2017-3737

Test reading/writing to an SSL object after a fatal error has been
detected. This CVE only affected 1.0.2, but we should add it to other
branches for completeness.

Reviewed-by: Rich Salz <rsalz@openssl.org>

bn/asm/rsaz-avx2.pl: fix digit correction bug in rsaz_1024_mul_avx2.

Credit to OSS-Fuzz for finding this.

CVE-2017-3738

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update eng_fat.c

This line will allow use private keys, which created by Crypto Pro, to
sign with OpenSSL.

CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4836)

(cherry picked from commit b35bb37a3d6ecf11b43ef8717600ab61718c3cc2)

Adjusted Argument Indices
CLA: trivial

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4835)

(cherry picked from commit 1e2804f25c80136c33f3508adb54b24106b6b6f6)

Make possible variant SONAMEs and symbol versions

This small change in the Unix template and shared library build
scripts enables building "variant" shared libraries.  A "variant"
shared library has a non-default SONAME, and non default symbol
versions.  This makes it possible to build (say) an OpenSSL 1.1.0
library that can coexist without conflict in the same process address
space as the system's default OpenSSL library which may be OpenSSL
1.0.2.

Such "variant" shared libraries make it possible to link applications
against a custom OpenSSL library installed in /opt/openssl/1.1 or
similar location, and not risk conflict with an indirectly loaded
OpenSSL runtime that is required by some other dependency.

Variant shared libraries have been fully tested under Linux, and
build successfully on MacOS/X producing variant DYLD names.  MacOS/X
Darwin has no symbol versioning, but has a non-flat library namespace.
Variant libraries may therefore support multiple OpenSSL libraries
in the same address space also with MacOS/X, despite lack of symbol
versions, but this has not been verified.

Variant shared libraries are optional and off by default.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix docs for EVP_EncryptUpdate and EVP_DecryptUpdate

Fixes #4775

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4815)

Check for malloc failure

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4805)

(cherry picked from commit 378db52bb0177ae03cac3c3ba194bb6dec34a2d7)

Pretty-print large INTEGERs and ENUMERATEDs in hex.

This avoids taking quadratic time to pretty-print certificates with
excessively large integer fields. Very large integers aren't any more
readable in decimal than hexadecimal anyway, and the i2s_* functions
will parse either form.

Found by libFuzzer.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4790)

(cherry picked from commit 10a3195fcf7d04ba519651cf12e945a8fe470a3c)

Fix EVP_MD_meth_new.pod

A name too many in the NAME section, and a copyright year update

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4789)

(cherry picked from commit 92793648945affdfe529fa711666d19528815789)

Correct EVP_CIPHER_meth_new.pod and EVP_MD_meth_new.pod

One had some lines copied from the other, and both were missing a
proper RETURN VALUES section.

Fixes #4781

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4787)

(cherry picked from commit 51e47d5f6a7944c3e3ddc5f6d376fc1320639277)

Avoid unnecessary MSYS2 conversion of some arguments

Fixes #4740

The MSYS2 run-time convert arguments that look like paths when
executing a program unless that application is linked with the MSYS
run-time. The exact conversion rules are listed here:

    http://www.mingw.org/wiki/Posix_path_conversion

With the built-in configurations (all having names starting with
"mingw"), the openssl application is not linked with the MSYS2
run-time, and therefore, it will receive possibly converted arguments
from the process that executes it. This conversion is fine for normal
path arguments, but it happens that some arguments to the openssl
application get converted when they shouldn't. In one case, it's
arguments like '-passin file:something', and in another, it's a file:
URI (what typically happens is that URIs without an authority
component get converted, 'cause the conversion mechanism doesn't
recognise them as URIs).

To avoid conversion where we don't want it, we simply assign
MSYS2_ARG_CONV_EXCL a pattern to avoid specific conversions. As a
precaution, we only do this where we obviously need it.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4766)

bn/bn_add.c: address performance regression.

Performance regression was reported for EC key generation between
1.0.2 and 1.1.x [in GH#2891]. It naturally depends on platform,
values between 6 and 9% were observed.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/4743)

(cherry picked from commit a78324d95bd4568ce2c3b34bfa1d6f14cddf92ef)