Sören Tempel [Mon, 24 Aug 2015 20:16:48 +0000 (22:16 +0200)]
login: don't print motd if .hushlogin exists in users home
function old new delta
login_main 978 996 +18
Signed-off-by: Sören Tempel <soeren@soeren-tempel.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Peter Korsgaard [Mon, 24 Aug 2015 13:54:49 +0000 (15:54 +0200)]
dmesg: add -r option to print raw format even when FEATURE_DMESG_PRETTY is enabled
Similar to the "big" util-linux version. For !DMESG_PRETTY, the option is accepted
(but ignored) as well, for compatibility reasons.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Alex Dowad [Fri, 7 Aug 2015 09:53:26 +0000 (11:53 +0200)]
ifupdown: 'prio' should have been 'metric' in static_up and static_up6
When a static interface with explicit gateway and metric in /etc/network/interfaces
is enabled using 'ifup', and further, the BusyBox 'ip' applet is enabled, the
following error message appears at the console (and no default route is added):
ip: either "to" is duplicate, or "prio" is garbage
Tracing ifup reveals that it is attempting to run the following shell command:
ip route add default via <GW> dev <DEVICE> prio <METRIC>
'ip' does not understand the 'prio' argument, causing this error. With 'metric',
it works fine.
Signed-off-by: Alex Dowad <alexinbeijing@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 24 Aug 2015 17:48:03 +0000 (19:48 +0200)]
libbb: add setsockopt_foo helpers
function old new delta
setsockopt_int - 23 +23
do_load 918 934 +16
setsockopt_SOL_SOCKET_int - 14 +14
setsockopt_keepalive - 10 +10
setsockopt_SOL_SOCKET_1 - 10 +10
buffer_fill_and_print 169 178 +9
setsockopt_1 - 8 +8
nfsmount 3560 3566 +6
redirect 1277 1282 +5
tcpudpsvd_main 1782 1786 +4
d6_send_kernel_packet 272 275 +3
i2cget_main 380 382 +2
ed_main 2544 2545 +1
scan_recursive 380 378 -2
nbdclient_main 492 490 -2
hash_find 235 233 -2
cmdputs 334 332 -2
parse_command 1443 1440 -3
static.two 4 - -4
ntpd_main 1039 1035 -4
const_int_1 4 - -4
const_IPTOS_LOWDELAY 4 - -4
RCVBUF 4 - -4
ntp_init 474 469 -5
change_listen_mode 316 310 -6
uevent_main 416 409 -7
arping_main 1697 1690 -7
telnet_main 1612 1603 -9
socket_want_pktinfo 42 33 -9
setsockopt_reuseaddr 21 10 -11
setsockopt_broadcast 21 10 -11
httpd_main 772 757 -15
get_remote_transfer_fd 109 94 -15
make_new_session 503 487 -16
ftpd_main 2177 2160 -17
read_bunzip 1896 1866 -30
common_traceroute_main 4099 4058 -41
common_ping_main 1836 1783 -53
------------------------------------------------------------------------------
(add/remove: 5/4 grow/shrink: 8/21 up/down: 111/-283) Total: -172 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 24 Aug 2015 17:08:14 +0000 (19:08 +0200)]
Merge setsockopt error messages
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 24 Aug 2015 16:56:46 +0000 (18:56 +0200)]
traceroute: fix help text
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Fri, 14 Aug 2015 06:50:00 +0000 (08:50 +0200)]
Makefile: add missing libraries to LDLIBS
Static build with CONFIG_PAM fails on Debian Jessie due to undefined
references to libdl and libaudit.
Static build without pam, but with libcrypt required fails as well due
to undefined references to libpthread.
Fix these two cases by adding the missing libraries to LDLIBS when
appropriate.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Thu, 13 Aug 2015 13:57:22 +0000 (15:57 +0200)]
unit-tests: remove code depending on WANT_TIMING
Since there is no interest in merging a config option for WANT_TIMING,
remove the parts of code depending on it altogether.
While we're at it: add some newlines to improve readability.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Thu, 13 Aug 2015 13:57:21 +0000 (15:57 +0200)]
unit-tests: remove unnecesary field from struct bbunit_listelem
In the initial submission struct bbunit_listelem was manipulated by
custom list functions implemented in bbunit.c. Since the tests are now
added to the list by llist_add_to_end(), which allocates the llist_t
objects behind the scenes, there's no need for the *next field.
function old new delta
unit_main 142 141 -1
bbunit_strrstr_elem 24 16 -8
bbunit_obscure_weak_pass_elem 24 16 -8
bbunit_obscure_strong_pass_elem 24 16 -8
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-25) Total: -25 bytes
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 16 Aug 2015 17:56:16 +0000 (19:56 +0200)]
arping: make help text clearer
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Tue, 4 Aug 2015 16:10:37 +0000 (17:10 +0100)]
less: fix botched attempt to use last column
Commit
1ecb996 attempted to make read_lines() use the last column of
the terminal (as re_wrap() did). There were two problems with this:
- The size of the buffer allocated for lines wasn't increased to allow
for the extra character.
- The test for width overflow was moved after the point where the
next character was added to the buffer. This caused a buffer overflow
in certain circumstances.
For example, if the line beyond the end of the display was wider than
the display read_lines() would initially read the partial line into a
buffer. When the user moved down read_lines() would be called again
to ensure the rest of the line was read. This would place the next
character in the partial line before checking for overflow.
This can be fixed by moving the test for overflow back to where it was
before commit
1ecb996 and changing the comparison to `>` rather than
`>=`.
There are two other places where buffers are created without allowing
for width+1 characters.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Sun, 12 Jul 2015 20:19:28 +0000 (21:19 +0100)]
ipcalc: fix trivial usage message
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 4 Aug 2015 13:06:38 +0000 (15:06 +0200)]
zcip: tweak comments and make unsigned division more obvious
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 4 Aug 2015 12:30:31 +0000 (14:30 +0200)]
zcip: another code shrink
function old new delta
send_arp_request - 185 +185
zcip_main 1273 1272 -1
pick_nip 40 - -40
arp 185 - -185
------------------------------------------------------------------------------
(add/remove: 1/2 grow/shrink: 0/1 up/down: 185/-226) Total: -41 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 4 Aug 2015 10:28:21 +0000 (12:28 +0200)]
zcip: code shrink
function old new delta
zcip_main 1263 1230 -33
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 4 Aug 2015 01:27:56 +0000 (03:27 +0200)]
zcip: simplify code
function old new delta
zcip_main 1411 1263 -148
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Sun, 12 Jul 2015 15:06:37 +0000 (16:06 +0100)]
uname: make OS name configurable
A mailing list thread in September 2013 discussed changing the string
returned by the non-POSIX 'uname -o' option. Nothing ever came of this
because there was no agreement as to what the string should be.
Make the string configurable so that people can decide for themselves.
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Fri, 31 Jul 2015 16:33:24 +0000 (17:33 +0100)]
less: further tweaks to regular file detection
Test explicitly for REOPEN flags: update_num_lines is called
unconditionally so (num_lines != NOT_REGULAR_FILE) is also true when
num_lines contains a valid number of lines.
The call to fstat doesn't need to be in #if ENABLE_FEATURE_LESS_FLAGS:
the whole function is already in such a test.
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Aaro Koskinen [Thu, 30 Jul 2015 20:13:26 +0000 (23:13 +0300)]
diff.tests: add testcases for -B and single line changes
Add testcases for -B and single line changes.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Aaro Koskinen [Thu, 30 Jul 2015 20:13:25 +0000 (23:13 +0300)]
diff: fix -B with single line changes
Fix -B with single line changes. They were always ignored regardless
if they were blank or not.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 31 Jul 2015 14:42:20 +0000 (16:42 +0200)]
less: improve regular file detection in line counting code
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Fri, 24 Jul 2015 13:29:45 +0000 (14:29 +0100)]
less: allow use of last column of terminal
When read_lines tests whether a character will fit on the current
line it checks the *next* character but in case of overflow doesn't
display the *current* one. This results in the last column of the
terminal never being used.
The test in re_wrap (used when the terminal width changes or line
numbers are enabled/disabled) is different: it does allow the use
of the final column.
function old new delta
read_lines 764 770 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 6/0) Total: 6 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Fri, 24 Jul 2015 13:29:13 +0000 (14:29 +0100)]
less: fix line number confusion
Much of the code refers to lines using indices into the flines
array (which splits lines into portions that fit on the terminal).
In some cases this is wrong and actual line numbers should be
used:
- when lines are being truncated rather than wrapped (-S flag)
- when line numbers have been entered by the user
Also fix a bug in numeric input and improve the display at EOF.
function old new delta
goto_lineno - 111 +111
cap_cur_fline - 101 +101
buffer_to_line - 56 +56
buffer_up 35 66 +31
less_main 2606 2615 +9
goto_match 125 127 +2
buffer_down 81 56 -25
buffer_line 64 - -64
------------------------------------------------------------------------------
(add/remove: 3/1 grow/shrink: 3/1 up/down: 310/-89) Total: 221 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Fri, 24 Jul 2015 13:28:50 +0000 (14:28 +0100)]
less: add a function to detect when display is at end of file
Add a function to package the test that detects whether enough has
been read from the file to allow a screenful to be displayed.
Also use this to determine when to display '(END)' in the status
line. The previous code was incomplete and didn't handle truncated
lines (-S flag) properly.
function old new delta
at_end - 63 +63
status_print 111 109 -2
read_lines 819 764 -55
getch_nowait 319 264 -55
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/3 up/down: 63/-112) Total: -49 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Fri, 24 Jul 2015 13:28:08 +0000 (14:28 +0100)]
less: rearrange detection of non-regular files
Move the code to detect non-regular files to the point where the
file is being opened. If num_lines == READING_FILE guarantees
that the file is regular.
Detect when a file becomes unreadable between it first being opened
and the call to update_num_lines. Mark the file as being non-regular
so we don't try that again.
function old new delta
reinitialize 197 245 +48
update_num_lines 159 127 -32
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 48/-32) Total: 16 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Fri, 24 Jul 2015 13:27:42 +0000 (14:27 +0100)]
less: move code to count lines into a separate function
function old new delta
update_num_lines - 159 +159
m_status_print 409 266 -143
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 159/-143) Total: 16 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Tue, 21 Jul 2015 19:12:31 +0000 (20:12 +0100)]
less: fix numeric input
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Mike Frysinger [Thu, 30 Jul 2015 03:33:16 +0000 (23:33 -0400)]
echo: make escape sequences depend on fancy mode
Currently when you disable fancy echo, escape sequences are hardcoded
enabled (e.g. as if you used `echo -e` all the time). The opposite
behavior is more desirable (always disable -e support) because:
* This seems to contradict the spirit of the kconfig help text (where
it says enable support for -n/-e flags), although you could say that
we aren't supporting the -e flag directly as `echo -e` will show the
-e flag.
* POSIX makes escape sequences optional, and even says they are there
only on XSI-conformant systems.
* It saves space (~100 bytes on x86_64).
* It makes things faster!
* It makes it behave more like bash where you need an explicit -e flag
in order for escape sequences to be interpreted.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Linus Walleij [Mon, 27 Jul 2015 07:59:04 +0000 (09:59 +0200)]
fbset: fix rgba parsing
In commit
b5c7220e7b2b6611fe5beca494c67bfe51fcfafb
"fbset: respect rgba configuration lines in fb.modes"
I somehow managed to swap the offset/length markers around.
The man page for fb.modes says it should be offset/length
not length/offset as I was accidentally parsing it.
As my fb.modes file was also reversed I didn't notice
until I tried someone elses fb.modes file. Mea culpa.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Arthur Gautier [Tue, 28 Jul 2015 05:35:00 +0000 (05:35 +0000)]
udhcpc: dns labels can actually start with a number
While RFC1035 recommends a label not to start with a number, there is
actually no such limitation in dns. One may buy a domain name like
0x1.net and use it.
This commit remove this check and allow a user to use such domains.
Signed-off-by: Arthur Gautier <baloo@gandi.net>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Tue, 21 Jul 2015 20:28:09 +0000 (22:28 +0200)]
less: improvements to verbose status messages
Make verbose status messages (-m/-M flags) behave more like the
real `less` command:
- fix display of line numbers so they're correct whether lines are
being truncated (-S flag) or wrapped.
- don't display total lines or percentage when lines are read from
stdin: we don't have that information until we reach EOF. When
we do reach EOF the additional information is displayed.
- when lines are read from a file count the total number of lines
so that we can display percentages. Counting lines is avoided
until the information is actually needed. If the user pages to
EOF the separate read pass can be avoided entirely.
Fixes Bug 7586
function old new delta
m_status_print 195 382 +187
safe_lineno - 35 +35
reinitialize 172 182 +10
read_lines 675 685 +10
buffer_fill_and_print 178 169 -9
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/1 up/down: 242/-9) Total: 233 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 21 Jul 2015 17:50:48 +0000 (19:50 +0200)]
sync: add support for -d -f FILE
Based on the patch by Ari Sundholm <ari@tuxera.com>
function old new delta
sync_main 20 163 +143
packed_usage 30653 30673 +20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 163/0) Total: 163 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 19 Jul 2015 21:12:51 +0000 (23:12 +0200)]
Remove old_e2fsprogs/*
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Sun, 19 Jul 2015 21:05:20 +0000 (23:05 +0200)]
libbb: add a function to make a copy of a region of memory
Introduce a library routine to package the idiom:
p = xmalloc(b, n);
memcpy(p, b, n);
and use it where possible. The example in traceroute used xzalloc
but it didn't need to.
function old new delta
xmemdup - 32 +32
last_main 834 826 -8
make_device 2321 2311 -10
common_traceroute_main 3698 3685 -13
readtoken1 3182 3168 -14
procps_scan 1222 1206 -16
forkchild 655 638 -17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/6 up/down: 32/-78) Total: -46 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Sun, 19 Jul 2015 20:41:09 +0000 (21:41 +0100)]
less: correctly account for tabs when rewrapping lines
Lines are rewrapped when the terminal width changes or line numbers
are enabled/disabled. The current calculation always adds eight to
the line length for a tab whereas it should only add enough to move
to the next tab stop.
This doesn't affect the display of lines, which is handled elsewhere
and gets tab stops right, but it does cause lines to be wrapped at
the wrong position.
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Sat, 18 Jul 2015 15:20:03 +0000 (16:20 +0100)]
less: fix display of line numbers
Line numbers are displayed incorrectly on lines that have a search
pattern highlighted. The problem can be fixed by moving the call to
lineno_str in print_found above the while loop that alters the value
of the line pointer. However, a more substantial rewrite results in
savings.
function old new delta
buffer_print 688 697 +9
.rodata 156077 156045 -32
lineno_str 85 - -85
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 1/1 up/down: 9/-117) Total: -108 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Sun, 19 Jul 2015 10:12:29 +0000 (11:12 +0100)]
less: document -S flag and make it independently configurable
The -S flag, to cause long lines to be truncated, was enabled by
FEATURE_LESS_DASHCMD. This is non-obvious and -S is useful even
if the '-' command isn't enabled.
function old new delta
.rodata 156045 156077 +32
packed_usage 30223 30244 +21
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 53/0) Total: 53 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Wed, 1 Jul 2015 15:46:18 +0000 (16:46 +0100)]
ash: use alloca to get rid of setjmp
Now that the only thing protected by setjmp/longjmp is the saved string,
we can allocate it on the stack to get rid of the jump.
Based on commit
bd35d8e from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu.
function old new delta
readtoken1 3182 3116 -66
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-66) Total: -66 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 13 Jul 2015 01:52:32 +0000 (03:52 +0200)]
fix file mode
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Wed, 1 Jul 2015 15:45:40 +0000 (16:45 +0100)]
ash: remove parsebackquote flag
Commit
503a0b8 from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu says:
>The parsebackquote flag is only used in a test where it always has the
>value zero. So we can remove it altogether.
The first statement is incorrect: parsebackquote is non-zero when
backquotes (as opposed to $(...)) are used for command substitution.
It is possible for the test to be executed with parsebackquote != 0 in
that case.
The test is question checks whether quotes have been closed, raising
the error "unterminated quoted string" if they haven't. There seems
to be no good reason to allow unclosed quotes within backquotes. Bash,
hush and dash (after commit
503a0b8) all treat the following as an error:
XX=`"pwd`
whereas BusyBox ash doesn't. It just ignores the unclosed quote and
executes pwd.
So, parsebackquote should be removed but not for the reason stated.
function old new delta
parsebackquote 1 - -1
readtoken1 3222 3182 -40
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 0/1 up/down: 0/-41) Total: -41 bytes
Signed-off-by: Ron Yorston <rmy@frippery.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Maninder Singh [Wed, 10 Jun 2015 03:47:27 +0000 (03:47 +0000)]
Removes stray empty line from code
This patch removes stray empty line from busybox code
reported by script find_stray_empty_lines
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Akhilesh Kumar <akhilesh.k@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Clayton Shotwell [Thu, 21 May 2015 19:48:35 +0000 (14:48 -0500)]
applets: Add installation of individual binaries
Adding support to install individual binaries if the option is
enabled. This also installs the shared libbusybox.so.* library.
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 1 Jul 2015 17:07:24 +0000 (19:07 +0200)]
ps: fix SEGV on narrow screens. closes 8176
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 1 Jul 2015 16:36:06 +0000 (18:36 +0200)]
ipaddress: better formatting, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Michael Tokarev [Wed, 20 May 2015 13:27:44 +0000 (16:27 +0300)]
ip addr: support change and replace commands
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Maninder Singh [Mon, 1 Jun 2015 10:40:09 +0000 (10:40 +0000)]
fix whitespaces
reported by script :- scripts/fix_ws.sh
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Maninder Singh [Mon, 1 Jun 2015 10:38:07 +0000 (10:38 +0000)]
fix if(p)/free(p) construct
No need of explicit NULL check before free.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Akhilesh Kumar <akhilesh.k@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Fri, 5 Jun 2015 08:27:32 +0000 (10:27 +0200)]
i2cdetect: use break instead of goto in list_i2c_busses_and_exit()
Since there are now more statements in the if block after the while loop
in list_i2c_busses_and_exit(), there's no need for a label.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Fri, 5 Jun 2015 08:27:31 +0000 (10:27 +0200)]
i2cdump: code rework
Split i2cdump_main() into shorter functions. Simplify the code a bit.
Make block an array of ints so that we can store negative results of
read functions (fixes a bug found by Denys Vlasenko).
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Fri, 5 Jun 2015 08:27:30 +0000 (10:27 +0200)]
i2cdetect: add a check for (mode == DETECT_MODE_AUTO)
We should only warn the user about addresses to be skipped if
(mode == DETECT_MODE_AUTO).
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Fri, 5 Jun 2015 08:27:29 +0000 (10:27 +0200)]
i2cdetect: don't scan non-regular addresses without the '-a' option
Addresses 0x00-0x02 shouldn't be scanned by default. This patch makes
'first' default to 0x03 and only enables lower addresses if '-a' option
is passed
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Fri, 5 Jun 2015 08:27:28 +0000 (10:27 +0200)]
i2cdetect: don't die on addresses already in use by drivers
We can't use i2c_set_slave_addr() in i2cdetect, as we have to check for
EBUSY after calling ioctl(I2C_SLAVE) and print 'UU' on busy addresses
instead of bailing-out.
While we're at it: reorder definitions of local vars in i2cdetect_main().
function old new delta
i2cdetect_main 703 744 +41
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/0 up/down: 41/0) Total: 41 bytes
text data bss dec hex filename
826097 4164 9584 839845 cd0a5 busybox_old
826145 4164 9584 839893 cd0d5 busybox_unstripped
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Junling Zheng [Sun, 7 Jun 2015 00:32:23 +0000 (02:32 +0200)]
chown: fix help text
Signed-off-by: Junling Zheng <zhengjunling@huawei.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ari Sundholm [Mon, 25 May 2015 13:16:11 +0000 (15:16 +0200)]
truncate: do not die when a file doesn't exist and no-create flag is on
Additionally, open(2) failures do not make the program die immediately.
This makes the behavior of the program match coreutils more closely.
function old new delta
truncate_main 161 221 +60
Signed-off-by: Ari Sundholm <ari@tuxera.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 25 May 2015 12:30:52 +0000 (14:30 +0200)]
Print one less newline at the end of bb_show_usage()
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Maninder Singh [Mon, 25 May 2015 11:46:36 +0000 (13:46 +0200)]
typo fixes
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 25 May 2015 11:31:25 +0000 (13:31 +0200)]
dc: fix "dc p" prinitng bogus data
function old new delta
check_under - 20 +20
print_no_pop 27 32 +5
pop 33 24 -9
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 25/-9) Total: 16 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 24 May 2015 16:01:53 +0000 (18:01 +0200)]
tc: fix print_rate
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 18 May 2015 08:23:16 +0000 (10:23 +0200)]
hush: add recent ash tests to hush testsuite too (they all pass for hush)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 08:13:21 +0000 (10:13 +0200)]
testsuite: add some tests for ash
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 07:59:14 +0000 (09:59 +0200)]
ash: fix breakage of ${v/pat/str}
The commit
ash: move parse-time quote flag detection to run-time
breaks pattern substitution in parameter expansion. Fix this and
revise the code so that the different handling of the pattern and
the replacement string takes place in rmescapes rather than the
separate function parse_sub_pattern.
function old new delta
rmescapes 227 273 +46
static.qchars 3 4 +1
subevalvar 1177 1157 -20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 47/-20) Total: 27 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 07:57:51 +0000 (09:57 +0200)]
ash: move parse-time quote flag detection to run-time
Because the parser does not recursively parse parameter expansion
with respect to quotes, we can't accurately determine quote status at
parse time. This patch works around this by moving the quote detection
to run-time where we do interpret it recursively.
Test case:
foo=\\ echo "<${foo#[\\]}>"
Old result:
<\>
New result:
<>
Do not quote back slashes in parameter expansions outside quotes.
Test case:
a=/b/c/*
b=\\
echo ${a%$b*}
Old result:
/b/c/*
New result:
/b/c/
Based on commits
880d952,
7cfd8be,
0d7d660 and
a7c21a6 from
git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu
function old new delta
argstr 1164 1193 +29
memtodest 147 174 +27
subevalvar 1153 1177 +24
redirect 1279 1282 +3
dolatstr 5 7 +2
static.spclchars 10 9 -1
expandarg 962 960 -2
evalcase 273 271 -2
evalcommand 1204 1197 -7
rmescapes 236 227 -9
preglob 27 8 -19
evalvar 604 582 -22
cmdputs 389 334 -55
readtoken1 3163 3061 -102
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 5/9 up/down: 85/-219) Total: -134 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 07:56:16 +0000 (09:56 +0200)]
ash: remove arithmetic expansion collapsing at parse time
Collapsing arithmetic expansion is incorrect when the inner arithmetic
expansion is a part of a parameter expansion.
Test case:
unset a
echo $((3 + ${a:=$((4 + 5))}))
echo $a
Old result:
12
(4 + 5)
New result:
12
9
Based on commit
bb777a6 from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu
function old new delta
readtoken1 3180 3163 -17
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 07:54:43 +0000 (09:54 +0200)]
ash: remove superfluous code in arithmetic mode
Based on commits
1a74845,
cfc3d6a and
ff13779 from
git://git.kernel.org/pub/scm/utils/dash/dash.git by Herbert Xu
function old new delta
evalcommand 1197 1204 +7
localcmd 327 325 -2
readtoken1 3200 3180 -20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 7/-22) Total: -15 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 07:53:26 +0000 (09:53 +0200)]
ash: do not expand tilde in parameter expansion within quotes
Test case:
unset a
echo "${a:-~root}"
Old result:
/root
New result:
~root
Based on commit
170f44d from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu
function old new delta
evalvar 598 604 +6
parse_command 1440 1443 +3
localcmd 325 327 +2
readtoken1 3199 3200 +1
argstr 1180 1164 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/1 up/down: 12/-16) Total: -4 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 07:51:35 +0000 (09:51 +0200)]
ash: perform tilde expansion in all parameter expansion words
Previously tilde expansion was not carried out for =?#% expansion words.
Test case:
a=~root:~root
echo ${a#~root}
Old result:
/root:/root
New result:
:/root
Based on commit
dd721f71 from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu
function old new delta
subevalvar 1152 1153 +1
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Ron Yorston [Mon, 18 May 2015 07:49:28 +0000 (09:49 +0200)]
ash: code shrink around varvalue
Based on commit
c989d72 from git://git.kernel.org/pub/scm/utils/dash/dash.git
by Herbert Xu
function old new delta
strtodest - 40 +40
memtodest 123 147 +24
parse_command 1443 1440 -3
readtoken1 3205 3199 -6
argstr 1203 1180 -23
varvalue 788 660 -128
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/4 up/down: 64/-160) Total: -96 bytes
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 13 May 2015 00:20:14 +0000 (02:20 +0200)]
ash: explain what "local -" does
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Eugene Rudoy [Sun, 26 Apr 2015 21:32:00 +0000 (23:32 +0200)]
ash: consider "local -" case while iterating over local variables in mklocal.
fixes segfault introduced in
0a0acb55db8d7c4dec445573f1b0528d126b9e1f with functions using "local -".
test-case: f() { local -; local x; }; f
note: with this change applied multiple 'local -'s still cause multiple entries to be added to the localvars list.
this problem will be addressed in a separate commit.
Signed-off-by: Eugene Rudoy <gene.devel@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Daniel Thompson [Tue, 12 May 2015 06:56:04 +0000 (07:56 +0100)]
libbb: Enable support for !CONFIG_MULTIUSER
Linux recently gained a new config option, CONFIG_MULTIUSER, that makes
support for non-root users optional. This results in a number of syscalls
being disabled: setuid, setregid, setgid, setreuid, setresuid, getresuid,
setresgid, getresgid, setgroups, getgroups, setfsuid, setfsgid, capget,
capset.
Currently a number of busybox applets, including login, struggle to run
when CONFIG_MULTIUSER is disabled. Even the root user is unable to login:
login: can't set groups: Functi
This patch adds code to make change_identity() a nop on single user
systems. It works by recognising the signature errno value (ENOSYS, due
to the system calls being disabled) and, to avoid security risks, only
deploys when the current uid and target uid is the same.
After the patch is applied any attempt to switch to a non-root user will
fail. Thus a badly configured userspace (for example, one that tries to
start a daemon as a non-root user when the kernel cannot support this)
will report errors as one would expect.
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Mon, 11 May 2015 15:26:27 +0000 (17:26 +0200)]
i2c-tools: only try /dev/i2c/* if opening /dev/i2c-* fails with ENOENT
Trying to access /dev/i2c/* on every error after opening /dev/i2c-* can
mislead users who e.g. don't have root access. Instead of bailing-out
with "permission denied" we currently print "no such file or directory".
Fix it by trying open("/dev/i2c/%d") only if we got ENOENT.
Upstream i2cdetect tries to get any info it can from /sys and /proc even
when invoked by an unprivileged user, but we don't want to add unnecessary
bloat.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bartosz Golaszewski [Mon, 11 May 2015 15:22:10 +0000 (17:22 +0200)]
i2c-tools: fix 'i2cdetect -l'
Calling 'i2cdetect -l' only displays usage and exits. Fix it by
correctly parsing command-line arguments.
Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Thiago Jung Bauermann [Mon, 11 May 2015 15:18:59 +0000 (17:18 +0200)]
bzcat.tests: Run both .gz and .bz2 tests, and add .Z tests
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 11 May 2015 14:55:16 +0000 (16:55 +0200)]
tar: do not try to decode GNU extended headers as pax headers
function old new delta
get_header_tar 1736 1692 -44
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Matt Whitlock [Sun, 3 May 2015 16:59:50 +0000 (18:59 +0200)]
Conditionalize Bionic workarounds on __ANDROID_API__
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Matt Whitlock [Sun, 3 May 2015 16:57:44 +0000 (18:57 +0200)]
Bionic lacks mempcpy; enable existing workaround
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Thiago Jung Bauermann [Sun, 3 May 2015 16:40:12 +0000 (18:40 +0200)]
libarchive: auto-detect .Z files as well
Signed-off-by: Thiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 3 May 2015 16:24:33 +0000 (18:24 +0200)]
typo fix
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Andrew Fuller [Sun, 3 May 2015 16:18:25 +0000 (18:18 +0200)]
vi: basic undo feature shouldn't depend on yankmark
Currently basic undo functionality with the 'u' key depends on
FEATURE_VI_YANKMARK. These two features are separate, so we can remove this
dependency.
Signed-off-by: Andrew Fuller <abf@google.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Aaro Koskinen [Sun, 26 Apr 2015 12:22:05 +0000 (14:22 +0200)]
gzip: add support for compression levels 4-9
function old new delta
gzip_main 192 282 +90
static.gzip_level_config - 24 +24
packed_usage 30439 30459 +20
fill_window 216 220 +4
pack_gzip 1789 1729 -60
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 3/1 up/down: 138/-60) Total: 78 bytes
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Matt Whitlock [Sun, 26 Apr 2015 11:14:50 +0000 (13:14 +0200)]
Bionic lacks tcdrain; provide a workaround
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Matt Whitlock [Sat, 25 Apr 2015 19:32:48 +0000 (21:32 +0200)]
Bionic lacks ttyname_r; provide a workaround
Signed-off-by: Matt Whitlock <busybox@mattwhitlock.name>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 21 Apr 2015 14:00:41 +0000 (16:00 +0200)]
special-case {true,false,test} --help
This also removes their help texts.
function old new delta
run_applet_no_and_exit 442 452 +10
packed_usage 30713 30625 -88
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Bernhard Reutner-Fischer [Sun, 19 Apr 2015 21:45:17 +0000 (23:45 +0200)]
include: Fallback to UTMP unless there is UTMPX support
Fixes compilation against uClibc-0.9.30 for instance
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Ron Yorston [Sun, 19 Apr 2015 09:50:25 +0000 (10:50 +0100)]
libbb: remove unnecessary argument to nonblock_immune_read
The loop_on_EINTR argument to nonblock_immune_read is always set to 1.
function old new delta
xmalloc_reads 200 195 -5
pgetc 488 483 -5
argstr 1313 1308 -5
nonblock_immune_read 123 86 -37
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-52) Total: -52 bytes
Signed-off-by: Ron Yorston <rmy@tigress.co.uk>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 19 Apr 2015 16:55:12 +0000 (18:55 +0200)]
mdev: if a "future" mdev.seq is seen, do not overwrite it with ours
This was seen to happen if two mdevs are run in parallel,
mdev.seq is empty, and the "newer" one manages to write it first.
function old new delta
mdev_main 1366 1388 +22
atoll - 20 +20
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 19 Apr 2015 16:54:49 +0000 (18:54 +0200)]
mdev: improve logging
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 18 Apr 2015 17:38:13 +0000 (19:38 +0200)]
hush: document buggy handling of duplicate "local"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 18 Apr 2015 17:36:38 +0000 (19:36 +0200)]
ash: fix handling of duplicate "local"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 17 Apr 2015 12:24:55 +0000 (14:24 +0200)]
sed: implement ",+N" range end
function old new delta
add_cmd 1115 1173 +58
process_files 2226 2253 +27
sed_main 696 702 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 91/0) Total: 91 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 16 Apr 2015 10:44:02 +0000 (12:44 +0200)]
uevent: new applet
This applet listens on netlink socket with kernel's uevent messages.
Run-tested.
function old new delta
uevent_main - 416 +416
packed_usage 30671 30713 +42
applet_names 2531 2538 +7
applet_main 1468 1472 +4
RCVBUF - 4 +4
applet_nameofs 734 736 +2
------------------------------------------------------------------------------
(add/remove: 3/0 grow/shrink: 4/0 up/down: 475/0) Total: 475 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Felix Fietkau [Thu, 9 Apr 2015 08:20:16 +0000 (10:20 +0200)]
find: fix regression in status processing for path arguments
Regression added in commit
14158b4127dba30466c50147b868a6a89702960b
"find: add optional support for '-exec ... {} +'"
This commit causes find to exit on the first path argument that was not
found, which breaks existing scripts and is incompatible to other
implementations.
Instead of exiting on the first failure, return EXIT_FAILURE at the end
if any error occurred.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Alfonso Ranieri [Tue, 14 Apr 2015 12:32:39 +0000 (14:32 +0200)]
volume_id: fix a buglet introduced by is_prefixed_with() conversion
Signed-off-by: Alfonso Ranieri <alforan@tin.it>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 14 Apr 2015 12:15:15 +0000 (14:15 +0200)]
build system: make CONFIG_EXTRA_LDFLAGS go to LDFLAGS, not EXTRA_LDFLAGS
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Aaro Koskinen [Wed, 1 Apr 2015 21:55:17 +0000 (00:55 +0300)]
update copyright years
Copyright years seem to be out of date, e.g. coreutils/truncate.c
has Copyright (C) 2015.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Bernhard Reutner-Fischer [Thu, 2 Apr 2015 21:03:46 +0000 (23:03 +0200)]
*: Switch to POSIX utmpx API
UTMP is SVID legacy, UTMPX is mandated by POSIX.
Glibc and uClibc have identical layout of UTMP and UTMPX, both of these
libc treat _PATH_UTMPX as _PATH_UTMP so from a user-perspective nothing
changes except the names of the API entrypoints.
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Denys Vlasenko [Tue, 31 Mar 2015 20:00:55 +0000 (22:00 +0200)]
update example ntp.script
Handle an interesting corner case when NTP server is reachable...
but on a different IP now.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 31 Mar 2015 19:46:26 +0000 (21:46 +0200)]
ftpd: change_identity() must be after chroot()
Otherwise chroot() doesn't work for non-root
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 26 Mar 2015 09:49:02 +0000 (10:49 +0100)]
typo fix
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 22 Mar 2015 17:00:32 +0000 (18:00 +0100)]
truncate: new applet
Add the actual new source file :(
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
projects / oweals / busybox.git / log