sha3sum: fix config text (it's no longer only 512-bit)

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sha3: fix to conform to final SHA3 padding standard, add -a BITS option

function                                             old     new   delta
hash_file                                            331     396     +65
md5_sha1_sum_main                                    485     538     +53
packed_usage                                       30423   30464     +41
sha3_begin                                            17      31     +14
sha3_hash                                            101     110      +9
sha3_end                                              41      49      +8

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hexdump: fix numerous bugs in handling of backslashes

Was:
t=48\\ t=45\\ t=4c\\ t=4c\\ t=4f\\ t=0a\\
Now:
=48=\n =45=\n =4c=\n =4c=\n =4f=\n =0a=\n

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

udhcpc: Unconditionally call deconfig script, not only if lease is active

The udhcpc script may be used to setup fallback configuration (E.G. IPv4LL,
fixed IP address, ..) that also needs to be cleaned up on release (E.G.
when SIGUSR2 is called or on shutdown with -R), so unconditionally call
deconfig.

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

build system: always rewrite NUM_APPLETS.h

Conditional rewrite can keep NUM_APPLETS.h mtime old,
this causes make to try to regenerate it at every invocation.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

fdisk: tweak some messages

"Total allocated sectors 2021315 greater than the maximum 2020356"

maximum what?

Turns out, that's the CHS size of the disk.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

fdisk: print much less cryptic partition table

Before:

   Device Boot      Start         End      Blocks  Id System
/dev/sdb1   *           1         998      255471+  6 FAT16

What are "blocks"? What is that "+"?
How big is this partition?
Is start/end shown came from LBA fields or CHS fields?
Why are we torturing the user??

After:

Device  Boot StartCHS    EndCHS        StartLBA     EndLBA    Sectors  Size Id Type
/dev/sdb1 *  0,1,1       996,15,32           32     510974     510943  249M  6 FAT16

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

man: fix parsing of "DEFINE pager xyz". Closes 8976

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

init: fix for FreeBSD console opening. Closes 9031

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

unshare: --network should be --net. Closes 9116

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

docs: Update filenames in keep_data_small.txt

The filenames in docs/keep_data_small.txt are a little bit outdated.
It's better to change it to the current name.

decompress_unzip.c -> decompress_gunzip.c
(since commit 774bce8e8ba1e424c953e8f13aee8f0778c8a911)
libbb/messages.c -> libbb/ptr_to_globals.c
(since commit 574f2f43948bb21d6e4187936ba5a5afccba25f6)

Signed-off-by: Kang-Che Sung <explorer09@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hush: fix "redirects can close script fd" bug

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

build system: different fix for include/applet_tables.h/include/NUM_APPLETS.h

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

wget/ssl_helper: update to wolfssl-3.9.8

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hush: do not leak script fds into NOEXEC children

We set all opened script fds to CLOEXEC, thus making then go away
after fork+exec.
Unfortunately, CLOFORK does not exist. NOEXEC children will still see those fds open.

For one, "ls" applet is NOEXEC. Therefore running "ls -l /proc/self/fd"
in a script from standalone shell shows this:

lrwx------    1 root     root            64 Aug 20 15:17 0 -> /dev/pts/3
lrwx------    1 root     root            64 Aug 20 15:17 1 -> /dev/pts/3
lrwx------    1 root     root            64 Aug 20 15:17 2 -> /dev/pts/3
lr-x------    1 root     root            64 Aug 20 15:17 3 -> /path/to/top/level/script
lr-x------    1 root     root            64 Aug 20 15:17 4 -> /path/to/sourced/SCRIPT1
...

with as many open fds as there are ". SCRIPTn" nest levels.
Fix it by closing these fds after fork (only for NOEXEC children).

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hush: bit better comments in redirect code. No logic changes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hush: `cmd` and arithmetic also need the fix for FILE rewind

Discovered by running testsuite with a newest glibc

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hush: fix a bug in FEATURE_SH_STANDALONE=y config. Closes 9186

Run this in a "sh SCRIPT":

sha256sum /dev/null
echo END

sha256sum is a NOEXEC applet. It runs in a forked child. Then child exit()s.
By this time, entire script is read, and buffered in a FILE object
from fopen("SCRIPT"). But fgetc() did not consume entire input.
exit() lseeks back by -9 bytes, from <eof> to 'e' in 'echo'.
(this may be libc-specific).
This change of fd position *is shared with the parent*!

Now parent can read more, and it thinks there is another "echo END".
End result: two "echo END"s are run.

Fix this by _exit()ing instead.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

top: move free(prev_hist) out of signal path

It was seen being called recursively on repeated signals,
leading to double free

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ifplugd: if SIOCSIFFLAGS fails with ENODEV, don't die

Some user managed to hit a race where iface is gone between SIOCGIFFLAGS
and SIOCSIFFLAGS (!). If SIOCSIFFLAGS fails, treat it the same as failed
SIOCGIFFLAGS

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

less: fix bracket search to match behavior of less 481

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

less: fix SEGV

testcase: echo "" | less, then press ')' key

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

gzip: add test that checks that -9 compresses better than -1

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

gzip: fix compression level bug. Closes 9131

fix broken logic to get the gzip_level_config value from options -1 to
-9.

This fixes an off-by-one bug that caused gzip -9 output bigger files
than the other compression levels.

It fixes so that compression level 1 to 3 are actually mapped to level 4
as comments say.

It also fixes that levels -4 to -9 is mapped to correct level and avoids
out-of-bounds access.

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

lineedit: trivial codeshrink for vi-mode

Introduce and use BB_isalnum_or_underscore().

function                                             old     new   delta
BB_isalnum_or_underscore                               -      43     +43
vi_word_motion                                       162     150     -12
vi_end_motion                                        163     145     -18
vi_back_motion                                       198     179     -19
BB_isalnum                                            39       -     -39
------------------------------------------------------------------------------
(add/remove: 1/1 grow/shrink: 0/3 up/down: 43/-88)            Total: -45 bytes

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

build system: fix include/NUM_APPLETS.h generation

TBH, it's more like "work around my bad makefile-fu" than "fix"...

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libiproute: eliminate some redundant zero stores

function                                             old     new   delta
do_iprule                                            974     955     -19
rtnl_dump_request                                    173     146     -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-46)             Total: -46 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ip: fix an improper optimization: req.r.rtm_scope may be nonzero here

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

cp: fix -i for POSIX mode. Closes 9106

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ntpd: respond only to client and symmetric active packets

The busybox NTP implementation doesn't check the NTP mode of packets
received on the server port and responds to any packet with the right
size. This includes responses from another NTP server. An attacker can
send a packet with a spoofed source address in order to create an
infinite loop of responses between two busybox NTP servers. Adding
more packets to the loop increases the traffic between the servers
until one of them has a fully loaded CPU and/or network.

Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

service/fw example: do not ruin $if[], use different name

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

wget: run s_client helper with -servername HOST

This is necessary for multi-hosted TLSed web sites.

function                                             old     new   delta
spawn_https_helper_openssl                           334     441    +107

Based on a patch by Jeremy Chadwick <jdc@koitsu.org>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ssl_helper.sh: strip was invoked incorrectly

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

var_service/fw: optionally flush all netdevs; optionally prefer one 0/0 routing

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ash: fix handling of ${VAR: -2}

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

config: disentangle PREFER_APPLETS from SH_STANDALONE and SH_NOFORK

On user request.
I thought enabling/disabling them all together is more consistent.
Evidently, some people do want them to be separately selectable.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

hush: fix a possible bug

Not sure this was actually a triggerable bug, but the code looked flaky.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

typo fixes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ash: do not leave SIGQUIT ignored on "exec CMD"

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

cp: make verbose cp show symlink copies too

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: include -H and -S in short help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sendmail: improve help text

* explain which server we contact by default
* explain when auth is done
* -t is not implied! remove that from help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

trylink: use "mktemp tmp.XXXXXXXXXX" to placate OS X

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

{md5,shaN}sum: make -c EMPTY fail

function                                             old     new   delta
md5_sha1_sum_main                                    466     485     +19

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

examples: add a useful "see abridged log" script for ntpd service example

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

cpio: tweak help text

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

getopt32: add new syntax of 'o:+' and 'o:*' for -o NUM and -o LIST

In many cases, this aqllows to drop use of opt_complementary.
Approximately -400 bytes:

function                                             old     new   delta
getopt32                                            1423    1502     +79
opt_string                                            17      18      +1
OPT_STR                                               24      25      +1
uniq_main                                            416     406     -10
timeout_main                                         279     269     -10
sulogin_main                                         270     260     -10
readprofile_main                                    1825    1815     -10
ps_main                                              543     533     -10
pidof_main                                           245     235     -10
pgrep_main                                           611     601     -10
od_main                                             2600    2590     -10
mkfs_minix_main                                     2684    2674     -10
mkfs_ext2_main                                      2603    2593     -10
microcom_main                                        712     702     -10
makemime_main                                        315     305     -10
ionice_main                                          282     272     -10
inetd_main                                          2074    2064     -10
ifplugd_main                                        1144    1134     -10
halt_main                                            353     343     -10
getopt_main                                          636     626     -10
fdisk_main                                          2854    2844     -10
env_main                                             206     196     -10
dmesg_main                                           319     309     -10
conspy_main                                         1214    1204     -10
awk_main                                             981     971     -10
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/22 up/down: 81/-220)         Total: -139 bytes
   text    data     bss     dec     hex filename
 919373     906   14060  934339   e41c3 busybox_old
 918969     906   14060  933935   e402f busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

whois: implement -i

function                                             old     new   delta
whois_main                                           654     675     +21
packed_usage                                       30355   30356      +1

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

whois: make it actually work

It was doing way too simplistic work of just querying the server,
no redirects, no query massaging. This required user to know a lot about whois,
and enter at least three queries for each host to get meaningful information.

function                                             old     new   delta
whois_main                                           209     646    +437

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

build system: fix a few warnings for allnoconfig build

Not that allnoconfig build is useful in any way...

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libbb: suppress warning about run_applet_and_exit

When busybox is configured to contain a single applet an unnecessary
declaration of run_applet_and_exit results in a warning.  Move the
declaration to avoid this.

Reported-by: Lauri Kasanen <curaga@operamail.com>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

arp: fix buffer overflow. Closes 9071

function                                             old     new   delta
arp_main                                            1910    1898     -12

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

udhcpc: run "deconfig" script in manual renew state too. closes 9061

The bug was seen when the following is done:

    # killall 1 udhpc; killall 2 udhpc

Performing a DHCP renew
state: 2 -> 5
Sending renew...
Entering released state
state: 5 -> 6  <<<<<<<<<<<<<< not calling script!!!!

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ntpd: daemonize before DNS resolution

This resolves the following use case problem:

"I start ntpd by default from /etc/init.d

There might be no working network connection (not configured properly for
whatever reason, hardware problems, whatelse).

With busybox 1.25 ntpd seems to loop forever if now NTP servers are found,
blocking the boot process  and I never get a login to solve a possible pb or
to do a first time configuration."

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

build system: make CONFIG_FEATURE_USE_BSS_TAIL less funky

CONFIG_FEATURE_USE_BSS_TAIL code was aliasing bb_common_bufsiz1 to _end.
This is unreliable: _end may be not sufficiently aligned.

Change code to simply enlarge COMMON_BUFSIZE when we detect that _end
has significant amount of space to the end of page.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

df: use f_frsize instead of f_bsize for correct sizes

Use the correct field f_frsize instead of f_bsize.

The statfs f_bsize is the "Optimal transfer block size" while the
f_frsize is the "Fragment size (since Linux 2.6)". On some FUSE
filesystems those may differ.

Fixes bug 9046

URL: https://bugs.busybox.net/show_bug.cgi?id=9046

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

i2cdump: don't use common_bufsiz1

Commit e6a2f4cc changed the way common_bufsiz1 works. Now it needs to
be initialized before using, but i2cdump wasn't updated by said patch.

Since the fact that we're using common_bufsiz1 here isn't obvious (no
G_INIT() macro, no other global variables), drop it and simply
allocate the integer array required for block reads on the stack.

Tested with i2c block read on a Lenovo Thinkpad laptop.

Signed-off-by: Bartosz Golaszewski <bartekgola@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ping: populate icmp_id field for "simple" ping too

The ICMP RFC says that identifier and sequence number may be zero.
Having them zero for a Echo message, along with a data of zero's
as well will result in a Echo reply message with only zero's.

Some NAT implementations seem to get the checksum wrong on these
packages. Setting a checksum of 0x0 instead of 0xffff.

Through NAT:
  Internet Control Message Protocol
      Type: 0 (Echo (ping) reply)
      Code: 0
      Checksum: 0x0000 [incorrect, should be 0xffff]
      Identifier (BE): 0 (0x0000)
      Identifier (LE): 0 (0x0000)
      Sequence number (BE): 0 (0x0000)
      Sequence number (LE): 0 (0x0000)
      Data (56 bytes)
          Data: 000000000000000000000000000000000000000000000000...
          [Length: 56]

Without NAT:
  Internet Control Message Protocol
      Type: 0 (Echo (ping) reply)
      Code: 0
      Checksum: 0xffff [correct]
      Identifier (BE): 0 (0x0000)
      Identifier (LE): 0 (0x0000)
      Sequence number (BE): 0 (0x0000)
      Sequence number (LE): 0 (0x0000)
      [Request frame: 189]
      [Response time: 0.024 ms]
      Data (56 bytes)
          Data: 000000000000000000000000000000000000000000000000...
          [Length: 56]

And this in turn will make some hardware MAC checksum offloading
engines drop the packet.

(This was seen with a Synopsis MAC, the same one used in for instance the
stmmac Ethernet driver in the linux kernel.)

This change can be seen as a workaround for bugs in other layers.
But just setting an identifier for the Echo message packet will
avoid prodding the hornets nest.

function                                             old     new   delta
common_ping_main                                     424     500     +76

Signed-off-by: Jonas Danielsson <jonasdn@axis.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

Start 1.26.0 development cycle

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

Bump version to 1.25.0

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libarchive: fix xmalloc_open_zipped_read_close()

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

setsid: fix broken -c

This did not work: setsid sh -c 'anything'

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

typo fix

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

scripts/trylink: libbusybox fix

gcc 6.1.1 can emit empty line with spaces

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libarchive: fix open_zipped()

Last commit broke it (on both MMU and NOMMU)

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libarchive: fix xmalloc_open_zipped_read_close() on NOMMU

The somewhat new "unpack in memory" code was broken
for xmalloc_open_zipped_read_close() on NOMMU: we seek back
over signature, but then expect it to be already consumed.
Stop seeking back in this case.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

randomconfig fixes 5: false positive for tar; mount emits corrupted message

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

modprobe-small: fix bogus handling of unpack errors

"modprobe minix; echo $?"

Was:
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz': No such file or directory
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz': No such file or directory
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz'
modprobe: 'kernel/fs/minix/minix.ko.xz': Success
0

Now:
modprobe: corrupted data
modprobe: read error from 'kernel/fs/minix/minix.ko.xz'
1

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

randomconfig fixes 4

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

randomconfig fixes 3

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

randomconfig fixes 2

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

randomconfig fixes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libbb: move common code into run_applet_and_exit

Both calls to run_applet_and_exit are followed by the same code
to print an error message and return status 127.  Remove this
duplication and make run_applet_and_exit static.

function                                             old     new   delta
run_applet_and_exit                                  675     667      -8
main                                                 119      92     -27
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-35)             Total: -35 bytes

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

Allow "busybox <applet>" to work when busybox is disabled

A recent commit made it possible to disable BusyBox's --install
and --list options.  However it also stopped "busybox <applet>
<params>" from working.

Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ntpd: retry initial DNS resolution (forever, no timeout for now).

Some users start ntpd on boot, and don't babysit it. If it dies because
DNS is not yet up and therefore NTP servers can't be found, users are
not happy.

Example behavior with a peer name which can't be resolved:

ntpd: bad address 'qwe.rty.ghj.kl'
...5 sec...
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
ntpd: bad address 'qwe.rty.ghj.kl'
...

Based on the patch by Kaarle Ritvanen <kaarle.ritvanen@datakunkku.fi>

function                                             old     new   delta
resolve_peer_hostname                                  -      81     +81
ntpd_main                                           1130    1061     -69
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 81/-69)             Total: 12 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libbb: fix time parsing of [[CC]YY]MMDDhhmm[.SS]. Closes 8951

If SS is not given a value, it is assumed to be zero.
http://pubs.opengroup.org/onlinepubs/9699919799/utilities/touch.html

Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

Make busybox an optional applet

If it's disabled, code shrinks by about 900 bytes:

function                                             old     new   delta
usr_bin                                               10       -     -10
usr_sbin                                              11       -     -11
install_dir                                           20       -     -20
applet_install_loc                                   184       -    -184
run_applet_and_exit                                  686      21    -665
------------------------------------------------------------------------------
(add/remove: 0/4 grow/shrink: 0/1 up/down: 0/-890)           Total: -890 bytes
   text    data     bss     dec     hex filename
 911327     493    7336  919156   e0674 busybox_old
 909848     493    7336  917677   e00ad busybox_unstripped

but busybox executable by itself does not say anything useful:

$ busybox
busybox: applet not found

Based on the patch by Ron Yorston <rmy@pobox.com>

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

cp: add -u/--update and --remove-destination

Based on the patch by wdlkmpx@gmail.com

function                                             old     new   delta
copy_file                                           1546    1644     +98
add_partition                                       1270    1362     +92
ask_and_unlink                                        95     133     +38
do_iproute                                           132     157     +25
decode_one_format                                    710     715      +5
cp_main                                              369     374      +5
ubirename_main                                       198     202      +4
read_package_field                                   232     230      -2
bb_make_directory                                    421     412      -9
packed_usage                                       30505   30476     -29
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 7/3 up/down: 267/-40)           Total: 227 bytes

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

arping: avoid use of ether_ntoa(). Closes 8926

This is the only non-debug use of ether_ntoa(). By not using it,
we reduce bss:

function                                             old     new   delta
arping_main                                         1568    1665     +97
static.asc                                            18       -     -18
ether_ntoa                                            57       -     -57
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 1/0 up/down: 97/-75)             Total: 22 bytes
   text    data     bss     dec     hex filename
 911020     493    7352  918865   e0551 busybox_old
 911069     493    7336  918898   e0572 busybox_unstripped

Also, "standard" arping zero-pads MAC. ether_ntoa() does not.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sed: fix append command to match GNU sed 4.2.1

This closes one testcase failure

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

flock: merge spawn_and_wait() code patchs for -c and sans-c uses

function                                             old     new   delta
flock_main                                           334     319     -15

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

flock: fix -c; improve error handling of fork+exec

function                                             old     new   delta
flock_main                                           254     334     +80

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ip: fix problem on mips64 n64 big endian musl systems

Use designated initializers for struct msghdr.
The struct layout is non-portable and musl libc does not match what busybox expects.

Signed-off-by: Szabolcs Nagy <nsz@port70.net>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

sed: understand \n,\r and \t in i and a commands. Closes 8871

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

generate_BUFSIZ.sh: yet another tweak

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

*: slap on a few ALIGN1/2s where appropriate

The result of looking at "grep -F -B2 '*fill*' busybox_unstripped.map"

   text    data     bss     dec     hex filename
 829901    4086    1904  835891   cc133 busybox_before
 829665    4086    1904  835655   cc047 busybox

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

scripts/trylink: document DATA_SEGMENT_ALIGN() hack

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

generate_BUFSIZ.sh: catch BUFSIZE < 1024 also on "big" builds

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

build system: fix generate_BUFSIZ.sh to not alternate 1k and malloc builds

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libbb: constify *bb_common_bufsiz1 (if it is compiled to be a pointer)

This lets gcc optimize much better:

   text    data     bss     dec     hex filename
 922846     910   13056  936812   e4b6c busybox_unstripped.nonconst
 920255     910   13056  934221   e414d busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libbb: make "COMMON_BUFSIZE = 1024 bytes, the buffer will be malloced" work

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

udhcp: add setup_common_bufsiz() as needed

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

*: hopefully all setup_common_bufsiz() are in place

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

*: add most of the required setup_common_bufsiz() calls

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

libbb: make bb_common_bufsiz1 1 kbyte, add capability to use bss tail for it

The config item is FEATURE_USE_BSS_TAIL. When it is off (default):

function                                             old     new   delta
read_config                                          210     228     +18
doCommands                                          2279    2294     +15
ipneigh_list_or_flush                                763     772      +9
ipaddr_list_or_flush                                1256    1261      +5
display_process_list                                1301    1306      +5
conspy_main                                         1378    1383      +5
do_lzo_compress                                      352     355      +3
do_lzo_decompress                                    565     567      +2
push                                                  46      44      -2
inetd_main                                          2136    2134      -2
uevent_main                                          421     418      -3
addLines                                              97      92      -5
bb_common_bufsiz1                                   8193    1024   -7169
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 8/5 up/down: 62/-7181)        Total: -7119 bytes
   text    data     bss     dec     hex filename
 829850    4086    9080  843016   cdd08 busybox_old
 829901    4086    1904  835891   cc133 busybox_unstripped

FEATURE_USE_BSS_TAIL=y:

read_config                                          210     228     +18
doCommands                                          2279    2294     +15
ipneigh_list_or_flush                                763     772      +9
ipaddr_list_or_flush                                1256    1261      +5
display_process_list                                1301    1306      +5
conspy_main                                         1378    1383      +5
do_lzo_compress                                      352     355      +3
do_lzo_decompress                                    565     567      +2
inetd_main                                          2136    2134      -2
bb_common_bufsiz1                                   8193       -   -8193
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 8/1 up/down: 62/-8195)        Total: -8133 bytes
   text    data     bss     dec     hex filename
 829850    4086    9080  843016   cdd08 busybox_old
 829911    4086     880  834877   cbd3d busybox_unstripped

FIXME: setup_common_bufsiz() calls are missing.

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

unzip: shorter code for date/time generation

function                                             old     new   delta
unzip_main                                          2426    2414     -12

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

unzip: better match for "standard" unzip's output; string shrinkage

function                                             old     new   delta
unzip_main                                          2490    2426     -64
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-64)             Total: -64 bytes
   text    data     bss     dec     hex filename
 924008     906   17160  942074   e5ffa busybox_old
 923846     906   17160  941912   e5f58 busybox_unstripped

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

unzip: fix percent overflow; show "stored" files properly

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

unzip: fix a case where we find wrong CDE. Closes 8821

function                                             old     new   delta
unzip_main                                          2472    2490     +18

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>

ash: bash-compatible $'...' shouldn't expand in double quotes

Bash doesn't expand its $'...' construct in double quotes:

   $ echo "$'a\tb'"
   $'a\tb'

Change BusyBox ash to do the same.  This also fixes a problem with
here documents where BusyBox ash gave an incorrect result for:

   $ cat <<EOF
   > '$'
   > EOF
   '$'

Reported-by: Timo Teras <timo.teras@iki.fi>
Signed-off-by: Ron Yorston <rmy@pobox.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>