Daniel Engberg [Sat, 15 Jun 2019 10:20:44 +0000 (10:20 +0000)]
util-linux: Update to 2.34
Update util-linux to 2.34
Refresh patch
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Sat, 15 Jun 2019 09:07:53 +0000 (09:07 +0000)]
tools/gengetopt: Update to 2.23
Update gengetopt to 2.23
Remove 100-dependency_fix.patch, fixed upstream
Rework no tests and docs patch
Fix typo in copyright section
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Adrian Schmutzler [Thu, 4 Jul 2019 11:54:18 +0000 (13:54 +0200)]
ath79: Add missing IMAGE_SIZE for Etactica EG200
The Etactica EG200 is the only device in ath79 despite nand
target that lacks IMAGE_SIZE.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Luis Araneda [Thu, 4 Jul 2019 23:35:38 +0000 (19:35 -0400)]
zynq: convert to multi-variable device title
Use the newly introduced variables to better differentiate
between vendor, model and revision
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
DENG Qingfang [Fri, 5 Jul 2019 18:42:23 +0000 (02:42 +0800)]
iperf3: update to 3.7
Signed-off-by: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
Kevin Darbyshire-Bryant [Wed, 3 Jul 2019 08:22:55 +0000 (09:22 +0100)]
kmod-sched-cake: drop out of tree package, use kernel version
CAKE made it to kernel 4.19 and since OpenWrt now at kernel 4.19 we can
drop the out of tree cake package in base repository.
Add kmod-sched-cake to netsupport so package dependencies are still met.
Similarly CAKE is retained as an optional qdisc module to avoid base
scheduler package size implications.
Backport upstream patches from k5.1 to address some small bugs and
support fwmark usage.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Rafał Miłecki [Tue, 2 Jul 2019 14:10:57 +0000 (16:10 +0200)]
base-files: drop support for NAND upgrade in platform_pre_upgrade()
With bcm53xx switched to the new procedure there is no more need for
keeping that backward compatibility code.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 2 Jul 2019 14:10:56 +0000 (16:10 +0200)]
bcm53xx: sysupgrade: call nand_do_upgrade() from platform_do_upgrade()
Calling nand_do_upgrade() from platform_pre_upgrade() was obsoleted in
the commit
30f61a34b4cf ("base-files: always use staged sysupgrade").
This change brings bcm53xx in sync with other targets and allows
dropping backward compatibility code. It shouldn't change any user
visible behavior.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 2 Jul 2019 11:16:08 +0000 (13:16 +0200)]
base-files: drop unused jffs2_copy_config()
Its last usage was dropped back in 2013 in the commit
b95bdc8ab56e
("kernel/base-files: clean up old code related to refreshing mtd
partitions, it is no longer used anywhere").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hauke Mehrtens [Fri, 28 Jun 2019 19:52:41 +0000 (21:52 +0200)]
kernel: Add missing includes mtdsplit_*.c
This fixes the following compile problem with kernel 4.9 on lantiq:
drivers/mtd/mtdsplit/mtdsplit_uimage.c:244:34: error: array type has incomplete element type 'struct of_device_id'
static const struct of_device_id mtdsplit_uimage_of_match_table[] = {
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/mtd/mtdsplit/mtdsplit_uimage.c:245:4: error: field name not in record or union initializer
{ .compatible = "denx,uimage" },
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 7 Jul 2019 11:30:48 +0000 (13:30 +0200)]
ath10k-firmware: Fix mirror hash
Fixes:
7f79882d44ba ("ath10k-firmware: update board-2.bin for community firmwares")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Mon, 17 Jun 2019 18:25:56 +0000 (20:25 +0200)]
kernel: Fix MIPS bounds check virt_addr_valid
This is pending to get into the upstream kernel.
This fixes a bug in the upstream kernel which was added to stable some
time ago.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Andrew Cameron [Sun, 30 Jun 2019 02:45:09 +0000 (21:45 -0500)]
ath79: increase kernel partition size for CPE610v1
Increase the Kernel partition to address the issue discussed here
https://forum.openwrt.org/t/cpe610-v1-sysupgrade-bin-missing-too-big/39637/5
Switch Back to the okli Loader to support increased partition size
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [add <> for e-mail]
Emil Muratov [Sun, 24 Feb 2019 07:00:03 +0000 (10:00 +0300)]
zram-swap: Add extra commands for status/compaction
This patch adds two new commands:
zram status - shows memory stats for all zram swaps
zram compaction - trigger compaction for all zram swaps
Signed-off-by: Emil Muratov <gpm@hotplug.ru>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Emil Muratov [Thu, 1 Nov 2018 18:53:43 +0000 (21:53 +0300)]
busybox: enable swapon/off by default to make it consistent with mkswap
No size increase on busybox binary.
Since busybox mkswap is already enabled by default it seems reasonable
to enable swapon/off too. For ex. this obsoletes installing block-mount
dependency for zram-swap.
Signed-off-by: Emil Muratov <gpm@hotplug.ru>
Emil Muratov [Wed, 31 Oct 2018 21:16:58 +0000 (00:16 +0300)]
zram-swap: Add zram compaction and statistics info output
Executing '/etc/init.d/zram start' during runtime (with a swap being already
mounted) triggers zram device compaction and prints out nice stats info about
zram memory usage
Signed-off-by: Emil Muratov <gpm@hotplug.ru>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [use IEC's MiB unit]
Emil Muratov [Wed, 31 Oct 2018 08:43:49 +0000 (11:43 +0300)]
zram-swap: Fix busybox dependency check
- fix dependency on BUSYBOX_CONFIG_SWAPONOFF (removed in
84da2a6)
- add busybox defaults checking (fix zram-swap always installs swap-utils
and libblkid as dependency, even if busybox includes mkswap by default)
Signed-off-by: Emil Muratov <gpm@hotplug.ru>
Linus Walleij [Sun, 7 Jul 2019 00:10:42 +0000 (02:10 +0200)]
gemini: Add SL93512r missing ImageInfo file
Somehow I missed to add the magical image cooking file
for the SL93512r. Fix it.
Fixes:
18e2053becb8 ("gemini: Add StorLink SL93512r images")
Reported-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [added Fixes,
changed subject]
Adrian Schmutzler [Fri, 5 Jul 2019 16:56:06 +0000 (18:56 +0200)]
gemini: Fix device name for StorLink SL93512r
This has been reported by Chen Minqiang (@ptpt52).
Reported-by: Chen Minqiang <ptpt52@gmail.com>
Fixes:
18e2053becb8 ("gemini: Add StorLink SL93512r images")
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [Added tags]
Konstantin Demin [Mon, 1 Jul 2019 14:15:50 +0000 (17:15 +0300)]
libnftnl: bump to version 1.1.3
bump ABI version accordingly (thanks to Jo-Philipp Wich).
Signed-off-by: Konstantin Demin <rockdrilla@gmail.com>
Adrian Schmutzler [Thu, 27 Jun 2019 17:27:10 +0000 (19:27 +0200)]
ramips: Fix compatible for YUKAI Engineering BOCCO
Looks like an undetected copy/paste error.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 4 Jul 2019 21:28:44 +0000 (23:28 +0200)]
base-files: Really check path in get_mac_binary
Currently, path argument is only checked for being not empty.
This changes behavior to actually check whether path exists.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Pawel Dembicki [Thu, 4 Jul 2019 11:17:02 +0000 (13:17 +0200)]
mpc85xx: Use gzip compressed kernel on HiveAP-330
After commit
1e41de2f48 ("mpc85xx: convert TL-WDR4900 v1 to simpleImage")
XZ compression of zImage was enabled. This change exposed a problem with
the HiveAP-330 images, which was fixed by foregoing the compression on
the kernel altogether with commit
98089bb8ba8
("mpc85xx: Use uncompressed kernel on the HiveAP-330").
This patch adds back the gzip compression of the kernel image by
utilizing the generic OpenWRT uImage method instead of relying on
the PowerPC bootwrapper script that did it previously.
Compile-tested: p1020/hiveap-330
Tested-by: Chris Blake <chrisrblake93@gmail.com> [run-tested]
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[filled in even more text]
Eneas U de Queiroz [Mon, 1 Jul 2019 16:40:01 +0000 (13:40 -0300)]
hostapd: adjust removed wolfssl options
This edjusts the selection of recently removed wolfssl options which
have always been built into the library even in their abscence.
Also remove the selection of libwolfssl itself, allowing the library to
be built as a module.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Eneas U de Queiroz [Mon, 1 Jul 2019 16:40:00 +0000 (13:40 -0300)]
wolfssl: update to 4.0.0-stable
Removed options that can't be turned off because we're building with
--enable-stunnel, some of which affect hostapd's Config.in.
Adjusted the title of OCSP option, as OCSP itself can't be turned off,
only the stapling part is selectable.
Mark options turned on when wpad support is selected.
Add building options for TLS 1.0, and TLS 1.3.
Add hardware crypto support, which due to a bug, only works when CCM
support is turned off.
Reorganized option conditionals in Makefile.
Add Eneas U de Queiroz as maintainer.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Eneas U de Queiroz [Mon, 1 Jul 2019 16:39:59 +0000 (13:39 -0300)]
wolfssl: update to 3.15.7, fix Makefile
This includes a fix for a medium-level potential cache attack with a
variant of Bleichenbacher’s attack. Patches were refreshed.
Increased FP_MAX_BITS to allow 4096-bit RSA keys.
Fixed poly1305 build option, and some Makefile updates.
Signed-off-by: Eneas U de Queiroz <cotequeiroz@gmail.com>
Christian Lamparter [Sat, 29 Jun 2019 14:56:31 +0000 (16:56 +0200)]
ath10k-firmware: update board-2.bin for community firmwares
This patch updates the board-2.bin for the default
IPQ4019, QCA9984 and QCA9888 ath10k-firmware-xyz-ct
and -ct-htt firmwares.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Rosen Penev [Thu, 20 Jun 2019 19:33:04 +0000 (12:33 -0700)]
toolchain: Don't force GCC8 on ARC
This prevents overriding it to use GCC9.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[changed logic to not fall back on 7.4]
Rosen Penev [Mon, 17 Jun 2019 23:44:12 +0000 (16:44 -0700)]
gdb-arc: Remove
Normal GDB has supported ARC since 8.0
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 17 Jun 2019 23:43:51 +0000 (16:43 -0700)]
gdb: Remove !arc dependency
Supported since 8.0.
Added uClibc-ng patch.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Martin Schiller [Fri, 5 Jul 2019 12:10:07 +0000 (14:10 +0200)]
kernel: 4.19: Backport usb dwc2 lpm mode hw check
This patch backports verbatim the commit from Linux 5.2-rc7 that fixes
the warnings about invalid lpm related parameters on hardware which
don't that.
This is the case for e.g. lantiq xrx200 targets.
Supported only in Linux 4.17 an later.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
[refresh patches, fix commit title]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Thu, 4 Jul 2019 20:43:00 +0000 (22:43 +0200)]
lantiq: fix etop compiler warnings
The following warnings are introduced by our own patches:
lantiq_etop.c:173:1: warning: no semicolon at end of struct or union
};
^
lantiq_etop.c: In function 'ltq_etop_change_mtu':
lantiq_etop.c:725:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN;
^~~
Signed-off-by: Mathias Kresin <dev@kresin.me>
Petr Štetiar [Sun, 30 Dec 2018 11:17:25 +0000 (12:17 +0100)]
lantiq: dts: use generic node names
In DTS Checklist[1] we're now demanding proper generic node names, as
the name of a node should reflect the function of the device and use
generic name for that[2]. Everybody seems to be copy&pasting from DTS
files available in the repository today, so let's unify that naming
there as well and provide proper examples.
1. https://openwrt.org/submitting-patches#dts_checklist
2. https://github.com/devicetree-org/devicetree-specification/blob/master/source/devicetree-basics.rst#generic-names-recommendation
Signed-off-by: Petr Štetiar <ynezz@true.cz>
[split out treewide patch, integrated P2812HNUF1 rename patch]
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[merged key and led changes, use generic node name for flash, wifi and
gpio]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Mon, 28 Jan 2019 22:30:10 +0000 (23:30 +0100)]
lantiq: dts: drop falcon clock node
It is pretty ovbious a misuse of the simple-bus binding as no child has
a address.
Luckly the clock node isn't used at all so it is safe to get rid of it.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Mon, 28 Jan 2019 22:31:54 +0000 (23:31 +0100)]
lantiq: dts: drop empty falcon devicetree node
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 15:59:08 +0000 (16:59 +0100)]
lantiq: dts: fix unit address mismatch warning
Set a unit address matching the reg property for the EASY98000 ethernet
node.
Fixes a unit mismatch devicetree compiler warning.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 15:34:33 +0000 (16:34 +0100)]
lantiq: dts: move localbus childs to dts
The localbus childs are highly board specific and need to be part of the
board dts. Otherwise we run into duplicate unit address issues if a
board has something else (NAND) connected to the bus id.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 15:03:00 +0000 (16:03 +0100)]
lantiq: dts: fix vmmc unit and register address
The register address is the same for danube und vr9. The register size
is 0x400 byte for danube and 0x300 byte for vr9.
The change doesn't have an impact as the vmmc driver doesn't use the
devicetree and has hardcoded register offsets.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 13:35:28 +0000 (14:35 +0100)]
lantiq: dts: use lower case for hex values
Use only lower case for hex values to keep it consistent.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 13:06:06 +0000 (14:06 +0100)]
lantiq: dts: drop superfluous address and size cells
Fixes the following devicetree compiler warning:
unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 13:05:38 +0000 (14:05 +0100)]
lantiq: dts: move partitions into partition node
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 12:48:03 +0000 (13:48 +0100)]
lantiq: dts: add missing size and address cells
Add size and address cells where missing to fix the following devicetree
compiler warning:
Warning (avoid_default_addr_size): Relying on default #address-cells value
Warning (avoid_default_addr_size): Relying on default #size-cells value
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 12:42:51 +0000 (13:42 +0100)]
lantiq: dts: fix size cells
SPI nodes only need an address and no size. Drop the size everywhere.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 12:32:38 +0000 (13:32 +0100)]
lantiq: dts: fix malformed unit addresses
Fixes:
Warning (unit_address_format): unit name should not have leading "0x"
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 12:21:06 +0000 (13:21 +0100)]
lantiq: dts: drop superfluous unit address
The cpu temperature driver has the register offset hardcode and doesn't
need a reg.
The mdio bus node is only used as a well known name and doesn't need a
reg or unit address.
syscon-reboot doesn't have a unit address or a reg either. The unit name
collides with reset-controller@10 anyway.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 11:23:03 +0000 (12:23 +0100)]
lantiq: dts: add reg if unit address is set
Add the reg property if the node has an unit address. Fixes the
following device tree compiler warning:
Warning (unit_address_vs_reg): node has a unit name, but no reg property
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Jan 2019 11:20:21 +0000 (12:20 +0100)]
lantiq: dts: move memory node to board dts
The memory node is highly board specific and should be only defined in
the board dts.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Daniel Golle [Sat, 6 Jul 2019 12:51:09 +0000 (14:51 +0200)]
ramips: convert DEVICE_TITLE to new variables
Also unify naming and add details where they were missing.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Adrian Schmutzler [Fri, 5 Jul 2019 17:03:48 +0000 (19:03 +0200)]
ath79: Add DEVICE_VENDOR for Ubiquiti Routerstation
This has been overlooked.
Reported by: Chen Minqiang (@ptpt52)
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Deng Qingfang [Wed, 3 Jul 2019 05:32:07 +0000 (13:32 +0800)]
iproute2: update to 5.1.0
Update iproute2 to 5.1.0
Remove upstream patch 010-cake-fwmark.patch
Backport a patch to fix struct sysinfo redefinition error
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Felix Fietkau [Mon, 1 Jul 2019 12:20:17 +0000 (14:20 +0200)]
mt76: update to the latest version
6cafaca mt7603: use READ_ONCE instead of ACCESS_ONCE
9e2e0b8 mt76: round up length on mt76_wr_copy
e378ef1 mt76: mt7615: fix sparse warnings: warning: restricted __le16 degrades to integer
7991dd7 mt76: mt7615: introduce mt7615_regd_notifier
901a4c7 mt76: mt7615: add hw dfs pattern detector support
57c600e mt76: mt7615: do not perform txcalibration before cac is complited
6afc952 mt76: mt7615: add csa support
8919516 mt76: mt7615: add radar pattern test knob to debugfs
3be723c mt76: mt7615: clean up FWDL TXQ during/after firmware upload
47fe37e mt76: mt7615: fall back to sw encryption for unsupported ciphers
bc5e041 mt76: mt7603: enable hardware rate up/down selection
ae760db mt76: mt7615: move mt7615_mcu_set_rates to mac.c
2ae01f7 mt76: mt7615: reset rate index/counters on rate table update
6f98378 mt76: mt7615: sync with mt7603 rate control changes
edbe88e mt76: usb: fix endian in mt76u_copy
f43b622 mt76: usb: remove unneeded {put,get}_unaligned
5e1e5b7 mt76: usb: use full intermediate buffer in mt76u_copy
017d0ff mt76: mt76u: fix typo in mt76u_fill_rx_sg
2c0ccf1 mt76: mt7615: always release sem in mt7615_load_patch
0c6f1a2 mt76: mt7615: introduce mt7615_mcu_send_ram_firmware routine
3dfc1ee mt76: mt7615: fix sparse warnings: incorrect type in assignment (different base types)
9475320 mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types)
e07451d mt76: mt7615: fix sparse warnings: warning: cast from restricted __le16
b973bef mt7603: do not use tssi-off power value for mt7628
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Adrian Schmutzler [Thu, 4 Jul 2019 14:11:24 +0000 (16:11 +0200)]
ath79: Correctly use DEVICE_VARIANT for NETGEAR WNDR3700
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Adrian Schmutzler [Thu, 4 Jul 2019 14:09:15 +0000 (16:09 +0200)]
ath79: Move DEVICE_VENDOR for NETGEAR to parent definition
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Paul Spooren [Sun, 16 Jun 2019 19:34:46 +0000 (21:34 +0200)]
ath79: split DEVICE_TITLE in multiple variables
This allows the definition of DEVICE_VENDOR, DEVICE_MODEL and
DEVICE_VARIANT. All three are merged together to look the same as the
current DEVICE_TITLE. Also, if DEVICE_TITLE is set it's directly used as
a *fallback* for devices which weren't upgraded yet.
This is based on the work of @sudhanshu16.
The motivation is to create JSON files based on provided metadata,
needing clear differentiation between vendor, model and revision.
Signed-off-by: Paul Spooren <mail@aparcar.org>
Mathias Kresin [Thu, 4 Jul 2019 06:24:00 +0000 (08:24 +0200)]
lantiq: drop kernel 4.14 support
The current state of the kernel 4.14 support is in the openwrt-19.07
branch. No need to keep a not default used kernel in this branch.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Martin Blumenstingl [Sat, 22 Jun 2019 09:45:23 +0000 (11:45 +0200)]
lantiq: switch to kernel 4.19
Use kernel 4.19 by default.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Tue, 2 Jul 2019 05:25:58 +0000 (07:25 +0200)]
lantiq: 4.19: fix panic when using the DMA API
With kernel 4.19 the DMA API relies on a struct device to work properly.
Backport upstream patches which passed a struct device instead of NULL
to the DMA API.
Fixes kernel panics during boot.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 23 Jun 2019 18:17:08 +0000 (20:17 +0200)]
lantiq: 4.19: load PCIe driver after PCI driver
In case a PCI device is physical present, the Lantiq PCI driver need to
be loaded prior to the Lantiq PCIe driver. Otherwise none of them will
work because updating the BAR 0 of a device attached to the PCIe Bus
will fail.
Till kernel commit
9667bb039bf6 ("MIPS: lantiq: remove unnecessary
of_platform_default_populate call"), the Lantiq PCI driver was probed
early in the boot process via plat_of_setup().
Since the mentioned commit, both drivers are probed via
of_platform_default_populate_init() and they are probed according to
their order in the devicetree source file.
If the Lantiq PCI driver is enabled in the devicetree, defer the probing
og the Lantiq PCIe driver till the Lantiq PCI driver is probed. Use the
presence of a PCU bus as indicater for a loaded Lantiq PCI driver.
This way we don't need to shuffle the PCI/PCIe nodes in the devicetree
source file, as they are already (correctly) ordered based on the unit
address.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Martin Blumenstingl [Sat, 22 Jun 2019 08:37:45 +0000 (10:37 +0200)]
lantiq: 4.19: increase usb reset timeouts
With kernel 4.19 dwc2 would not want to initialize due to reset
timeouts, while it worked fine with 4.14.
Increase the reset timeouts to 1 second, as it was used by the old
lantiq ifxhcd usb driver.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Hauke Mehrtens [Sun, 25 Nov 2018 19:06:39 +0000 (20:06 +0100)]
lantiq: make patches apply
The following patches are dropped because they are now upstreamed:
- 0002-gpio-stp-xway-Implement-get-callback.patch
upstreamed with commit
5b9b2b5284f819 ("gpio: stp-xway: Implement get
callback")
- 0027-01-net-phy-intel-xway-add-VR9-version-number.patch
upstreamed with commit
5b73d9955fb4b0 ("net: phy: intel-xway: add VR9
version number")
- 0027-02-net-phy-intel-xway-add-VR9-v1.1-phy-ids.patch
upstreamed with commit
f452518c982e57 ("net: phy: intel-xway: add VR9
v1.1 phy ids")
The following patches were updated:
- 0018-MTD-nand-lots-of-xrx200-fixes.patch
the mainline driver now resides in drivers/mtd/nand/raw/xway_nand.c
(instead of drivers/mtd/nand/xway_nand.c)
- 0025-NET-MIPS-lantiq-adds-xrx200-net.patch
the DMA API now requires a valid device to be passed to all operations
- 0028-NET-lantiq-various-etop-fixes.patch
the DMA API now requires a valid device to be passed to all operations
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Hauke Mehrtens [Sun, 25 Nov 2018 18:35:16 +0000 (19:35 +0100)]
lantiq: copy target to kernel 4.19
This just copies the files from the kernel 4.14 specific folders into
the kernel 4.19 specific folder, no changes are done to the files in
this commit.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Martin Blumenstingl [Wed, 3 Jul 2019 18:10:33 +0000 (20:10 +0200)]
lantiq: ltq-tapi: fix compatibility with Linux 4.15+
Linux 4.15 removes the init_timer() API. It's replaced by two functions:
- timer_setup() is used instead of init_timer() and also replaces the
timer "function" (callback) setup.
- from_timer() has to be used to obtain the use-case specific data from
a struct timer_list, which is now passed to the timer callback.
Update the timer API to be compatible with Linux 4.15+ so it compiles
with the upcoming Linux 4.19 kernel update.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Felix Fietkau [Wed, 3 Jul 2019 11:29:13 +0000 (13:29 +0200)]
build: skip kernel stack validation when building on macOS
Since we switched to 4.19, the kernel build checks for libelf to decide if
it should build tools for stack validation.
On macOS, this check fails during target/compile, but succeeds during package
build (because of the pkg-config path picking up target libraries).
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Mathias Kresin [Wed, 3 Jul 2019 07:23:35 +0000 (09:23 +0200)]
lantiq: enable STP where referenced
While moving common used parts to dtsi files, the was disabled by
default but not enabled for all boards using the STP.
Fixes:
f519fea4c6db ("lantiq: kernel 4.14: cleanup dts files")
Reported-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Matt Merhar [Sat, 22 Jun 2019 07:05:14 +0000 (03:05 -0400)]
openvpn: fix handling of list options
This addresses an issue where the list option specified in
/etc/config/openvpn i.e. 'tls_cipher' would instead show up in the
generated openvpn-<name>.conf as 'ncp-ciphers'. For context,
'ncp_ciphers' appears after 'tls_cipher' in OPENVPN_LIST from
openvpn.options.
Also, the ordering of the options in the UCI config file is now
preserved when generating the OpenVPN config. The two currently
supported list options deal with cipher preferences.
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Florian Eckert [Wed, 26 Jun 2019 10:36:01 +0000 (12:36 +0200)]
comgt: add delay option for 3g proto
All protos for wwan (ncm,qmi,mbim) do have a delay option.
To standardize that add also the missing delay option to the 3g proto.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Karel Kočí [Sat, 29 Jun 2019 09:10:19 +0000 (11:10 +0200)]
base-files: supress service restart of umount
Restart is in default implemented so it calls stop and start. This is
pretty unsafe to call on umount service. This service should not do
anything on restart the same way as on start. Only use of this service
is on stop.
Signed-off-by: Karel Kočí <cynerd@email.cz>
Florian Eckert [Mon, 1 Jul 2019 07:30:26 +0000 (09:30 +0200)]
uqmi: fix indentation style and boundary
Fix indentation style and boundary.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Thu, 27 Jun 2019 12:42:48 +0000 (14:42 +0200)]
uqmi: add mtu config option possibility
There are mobile carrier who have different MTU size in their network.
With this change it is now possible to configure this with the qmi
proto handler.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
W. Michael Petullo [Sun, 30 Jun 2019 00:06:20 +0000 (20:06 -0400)]
ar71xx: fix ath79/rb4xx IRQ initialization on kernel 4.14
Apply the same approach as in commit
3b53d6fdbc24 ("ar71xx: fix pci irq
init on kernel 4.14") to fix IRQ initialization for ath79-based chipsets
on rb4xx.
Ref: PR#2182
Acked-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: W. Michael Petullo <mike@flyn.org>
[commit ref fix]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Adrian Schmutzler [Sun, 16 Jun 2019 10:51:57 +0000 (12:51 +0200)]
ath79: Use -v1 suffix for TP-Link WDR3600/4300
In ath79, identifiers tplink_tl-wdr3600 and tplink_tl-wdr4300 have
been used while most other TP-Link devices include the revision.
Although there actually is only one major revision of these
devices, they bear the revision on their bottom (v1.x). TP-Link
also refers to the devices as V1 on its web page.
This patch thus adds -v1 to both so it is more consistent
with other devices and with what you would expect from reading
the on-device sticker and the support pages.
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Alban Bedel [Sat, 15 Jun 2019 10:18:01 +0000 (12:18 +0200)]
scripts: time.pl: Don't print the time on stderr
Having the build time written on stderr make it appear with V=w
although it is not an error or warning. Just write the time on stdout
to have it part of the build log like all the rest, but not clutter
the output when only warnings and errors should be shown.
Signed-off-by: Alban Bedel <albeu@free.fr>
Jo-Philipp Wich [Wed, 3 Jul 2019 05:19:41 +0000 (07:19 +0200)]
lua5.3: stage Lua headers in proper location
Fix wrong paths in InstallDev which cause Lua 5.3 headers to be staged
in /usr/include/, overwriting Lua 5.1 headers and leading to widespread
build failures in all Lua related packages.
Fixes: FS#2348
Fixes:
6b161bb8d5 ("lua5.3: package Lua 5.3 version")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jason A. Donenfeld [Tue, 2 Jul 2019 12:42:50 +0000 (14:42 +0200)]
wireguard: bump to 0.0.
20190702
* curve25519: not all linkers support bmi2 and adx
This should allow WireGuard to build on older toolchains.
* global: switch to coarse ktime
Our prior use of fast ktime before meant that sometimes, depending on how
broken the motherboard was, we'd wind up calling into the HPET slow path. Here
we move to coarse ktime which is always super speedy. In the process we had to
fix the resolution of the clock, as well as introduce a new interface for it,
landing in 5.3. Older kernels fall back to a fast-enough mechanism based on
jiffies.
https://lore.kernel.org/lkml/tip-
e3ff9c3678b4d80e22d2557b68726174578eaf52@git.kernel.org/
https://lore.kernel.org/lkml/
20190621203249.3909-3-Jason@zx2c4.com/
* netlink: cast struct over cb->args for type safety
This follow recent upstream changes such as:
https://lore.kernel.org/lkml/
20190628144022.31376-1-Jason@zx2c4.com/
* peer: use LIST_HEAD macro
Style nit.
* receive: queue dead packets to napi queue instead of empty rx_queue
This mitigates a WARN_ON being triggered by the workqueue code. It was quite
hard to trigger, except sporadically, or reliably with a PC Engines ALIX, an
extremely slow board with an AMD LX800 that Ryan Whelan of Axatrax was kind
enough to mail me.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Deng Qingfang [Wed, 5 Jun 2019 20:24:44 +0000 (04:24 +0800)]
iptables: update to 1.8.3
Update iptables to 1.8.3
ChangeLog:
https://netfilter.org/projects/iptables/files/changes-iptables-1.8.3.txt
Removed upstream patches:
- 001-extensions_format-security_fixes_in_libip.patch
- 002-include_fix_build_with_kernel_headers_before_4_2.patch
- 003-ebtables-vlan-fix_userspace_kernel_headers_collision.patch
Altered patches:
- 200-configurable_builtin.patch
- 600-shared-libext.patch
No notable size changes
Signed-off-by: Deng Qingfang <dengqf6@mail2.sysu.edu.cn>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [lipibtc ABI_VERSION fix]
Alexander Couzens [Wed, 12 Jun 2019 00:59:05 +0000 (02:59 +0200)]
Make linux kernel builds reproducible when BUILDBOT selected
The linux kernel is not reproducible because the build user
and domain is included into the kernel. Set the build user
to `builder` and build domain to buildhost.
It's also possible to build reproducible builds by setting
KERNEL_BUILD_USER KERNEL_BUILD_DOMAIN to static values.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Alexander Müller [Tue, 27 Nov 2018 14:32:18 +0000 (15:32 +0100)]
ramips: add support for TP-Link TL-WR841n v14
TP-Link TL-WR841n v14 is a router based on MediaTek MT7628N.
- MediaTek MT7628NN
- 32 MB of RAM
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 5x 10/100 Mbps Ethernet
Installation:
- copy the
'openwrt-ramips-mt76x8-tl-wr841n-v14-squashfs-tftp-recovery.bin'
file to your tftp server root and rename it to 'tp_recovery.bin'.
- configure your PC running the TFTP server with the static IP address
192.168.0.66/24
- push the reset button and plug in the power connector. Wait until
the orange led starts blinking (~6sec)
Signed-off-by: Alexander Müller <donothingloop@gmail.com>
Signed-off-by: Alexander Couzens <lynxis@fe80.eu> [small modifications gpio-hog]
Alexander Couzens [Tue, 2 Jul 2019 13:54:00 +0000 (15:54 +0200)]
ramips/leds: use devicetree alias led_wlan
Similiar to the lantiq target use a dts alias to define the wlan led
instead of static mapping in /etc/board.d/01_leds. Reduce code
duplication.
A device tree must define the alias "led-wlan" similiar to "led-boot".
/ {
aliases {
led-wlan = &led_wlan;
};
[..]
led_wlan: wlan {
label = "tl-wr841n-v14:green:wlan";
gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
};
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Bjørn Mork [Wed, 5 Jun 2019 12:19:11 +0000 (14:19 +0200)]
scripts/feeds: add src-include method
The src-include method allows recursive inclusion of feeds.conf snippets.
This can for example be used for adding static local feeds to
feeds.conf.default without ever having to update the local feeds.conf:
src-include defaults feeds.conf.default
src-link custom /usr/local/src/lede/custom
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Linus Walleij [Sun, 30 Jun 2019 15:07:56 +0000 (17:07 +0200)]
gemini: Add StorLink SL93512r images
This adds image generation for the StorLink reference design
SL93512r. This board is now supported upstream in kernel
v4.19.
As this image structure is identical to SQ201 and Raidsonic,
we simply refer to this as "storlink-reference" from now on.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Linus Walleij [Sun, 30 Jun 2019 15:05:13 +0000 (17:05 +0200)]
gemini: Drop switch kmod and swconfig
The DIR-685 needs this module compiled in for safety
(it is facing the LAN ports) and it is now (as of
kernel v4.19) using the DSA switch architecture so
swconfig is not needed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Rafał Miłecki [Sun, 30 Jun 2019 08:16:08 +0000 (10:16 +0200)]
lua5.3: drop unwanted & unneeded PROVIDES
The plan for packaging Lua is to have "lua5.1" and "lua5.3" packages
with only the first one having "lua" alias (PROVIDES) for backward
compatibility with existing packages.
Putting PROVIDES in lua5.3 was a copy & paste mistake.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Florian Eckert [Fri, 28 Jun 2019 10:59:19 +0000 (12:59 +0200)]
base-files: add network_get_uptime() to /lib/functions/network.sh
Add missing ubus api call for uptime value.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Vladimir Vid [Wed, 19 Jun 2019 19:00:03 +0000 (21:00 +0200)]
mvebu: add initial support for uDPU board
This adds initial support for micro-DPU (uDPU) board which is based on
Armada-3720 SoC. micro-DPU is the single-port FTTdp distribution point
unit made by Methode Electronics which offers complete modularity with
replaceable SFP modules both for uplink and downlink (G.hn over
twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e cable).
On-board features:
- 512 MiB DDR3
- 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC
- USB 2.0 Type-C connector
- 4GB eMMC
- ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type)
uDPU is intented to run on kernel 4.19 on newer due to the SFP and hardware support.
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
Brett Mastbergen [Tue, 25 Jun 2019 20:03:48 +0000 (16:03 -0400)]
mvebu: Fix platform.sh for non-generic espressobin versions
When the non-generic espressobin targets were added these board checks
were not updated. One side effect of this is that config is not saved
during an upgrade of -emmc,-v7, or -v7-emmc devices.
Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
Vladimir Vid [Mon, 13 May 2019 12:24:04 +0000 (14:24 +0200)]
u-boot-mvebu: bump to 2019.04
Some devices and packages require newer version of u-boot to work
properly, update u-boot to keep up with 4.19 kernel.
Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
[re-added missing commit message]
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Rafał Miłecki [Fri, 28 Jun 2019 10:04:16 +0000 (12:04 +0200)]
lua5.3: fix build with MacOS's make
It apparently requires passing V variable explicitly.
Fixes:
6b161bb8d528 ("lua5.3: package Lua 5.3 version")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 28 Jun 2019 09:38:23 +0000 (11:38 +0200)]
lua: fix build with MacOS's make
It apparently requires passing V variable explicitly.
Fixes:
fe59b46ca7e0 ("lua: include version number in installed files")
Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sat, 22 Jun 2019 12:47:41 +0000 (14:47 +0200)]
lua5.3: package Lua 5.3 version
This package provides an interpreter and compiler for Lua 5.3.5. It has
been decided to use separated package due to a backward incompatibility
of Lua 5.2 and 5.3.
This package/version:
1) Does not include lnum patch as its author didn't decide to port it to
the new version.
2) Does not provide shared library as the old patch doesn't apply
anymore. It can be added later if needed.
3) Does not come with examples package as tests were dropped by upstream
developers.
That said there is definitely a room for improvement and any further
work is highly appreciated. It works however and can be safely pushed as
a basic/early package release.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 21 Jun 2019 12:30:01 +0000 (14:30 +0200)]
lua: include version number in installed files
This will allow installing Lua 5.1 and newer versions at the same time.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 28 Jun 2019 06:04:13 +0000 (08:04 +0200)]
lua: clean up host patch fuzz
Refresh host patches to match target changes from the commit
4e800716ac97 ("lua: clean up patch fuzz").
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Petr Štetiar [Wed, 26 Jun 2019 15:19:28 +0000 (17:19 +0200)]
build: image: make image padding OS agnostic
Image padding with dd needs to be done in an OS independent way as not
all dd understand capital letter unit specifiers, and not all understand
lowercase either.
Fixes:
97833a57eff1 ("build: image: add pad-to and pad-rootfs-squashfs helpers")
Reported-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Petr Štetiar [Wed, 26 Jun 2019 08:43:39 +0000 (10:43 +0200)]
kernel: generic: add missing 4.19 config symbol
Fixes following kernel build issue on ath79 with CONFIG_KERNEL_FTRACE=y
enabled:
Tracers (FTRACE) [Y/n/?] y
Kernel Function Tracer (FUNCTION_TRACER) [Y/n/?] y
Kernel Function Graph Tracer (FUNCTION_GRAPH_TRACER) [Y/n/?] y
Enable trace events for preempt and irq disable/enable (PREEMPTIRQ_EVENTS) [N/y/?] (NEW)
...
Preempt / IRQ disable delay thread to test latency tracers (PREEMPTIRQ_DELAY_TEST) [N/m/?] (NEW)
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Koen Vandeputte [Thu, 20 Jun 2019 11:08:30 +0000 (13:08 +0200)]
uqmi: bump to latest git HEAD
1965c7139374 uqmi: add explicit check for message type when expecting a response
01944dd7089b uqmi_add_command: fixed command argument assignment
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 27 Jun 2019 10:28:36 +0000 (12:28 +0200)]
kernel: bump 4.14 to 4.14.131
Refreshed all patches.
Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 27 Jun 2019 10:27:02 +0000 (12:27 +0200)]
kernel: bump 4.9 to 4.9.184
Refreshed all patches.
Compile-tested on: none
Runtime-tested on: none
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Chuanhong Guo [Tue, 25 Jun 2019 15:32:20 +0000 (23:32 +0800)]
ramips: add support for TOTOLINK A7000R
Specifications:
- SoC: MT7621AT
- RAM: 128MB
- Flash: 16M SPI NOR
- Ethernet: 5x GE ports
- WiFi: 2.4G: MT7615N
5G: MT7615N
Flash instruction:
Upload generated sysupgrade firmware through factory web interface.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Chuanhong Guo [Tue, 25 Jun 2019 15:19:41 +0000 (23:19 +0800)]
ramips: mt7621: add IRQ for GPIO node
This makes interrupt-based gpio-keys working.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Yangbo Lu [Wed, 12 Jun 2019 06:11:32 +0000 (14:11 +0800)]
layerscape: drop pause frame support for aquantia phy
An aquantia phy patch which dropped pause frame support was
missing when integrated LSDK-19.03 kernel patches into OpenWrt.
Without this patch, LS1043A 10G port would not work. So apply it.
Patch link
https://source.codeaurora.org/external/qoriq/qoriq-components/
linux/commit/?h=linux-4.14&id=
66346b115818365cfaf99d292871b19f0a1d2850
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Petr Štetiar [Tue, 25 Jun 2019 16:45:02 +0000 (18:45 +0200)]
upgs: update to latest git HEAD
cd7eabcd8c9d ugps: Fix compilation under 64-bit
198c06051dd0 Fix build error caused by enabled extra compiler warnings
fc2ab8756b3b Enable extra compiler warnings
Signed-off-by: Petr Štetiar <ynezz@true.cz>
projects / oweals / openwrt.git / log