John Crispin [Fri, 12 Apr 2013 18:57:01 +0000 (18:57 +0000)]
update rt2880 config-3.8
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36327
John Crispin [Fri, 12 Apr 2013 18:56:53 +0000 (18:56 +0000)]
fix up the rt2880 patches
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36326
John Crispin [Fri, 12 Apr 2013 18:56:44 +0000 (18:56 +0000)]
fix RT-N15 support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36325
John Crispin [Fri, 12 Apr 2013 18:56:36 +0000 (18:56 +0000)]
update rt2880.dtsi
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36324
John Crispin [Fri, 12 Apr 2013 18:56:05 +0000 (18:56 +0000)]
fix rtl8366s OF binding
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36323
Gabor Juhos [Fri, 12 Apr 2013 18:30:25 +0000 (18:30 +0000)]
mpc85xx: set preinit interface to eth0 by default
This makes the WDR4900 accessible via ethernet in
failsafe mode.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36322
Gabor Juhos [Fri, 12 Apr 2013 18:30:24 +0000 (18:30 +0000)]
mpc85xx: Generate fdt for P1020RDB
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36321
Gabor Juhos [Fri, 12 Apr 2013 18:30:22 +0000 (18:30 +0000)]
mpc85xx: Add P1020RDB board support
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36320
John Crispin [Thu, 11 Apr 2013 19:18:07 +0000 (19:18 +0000)]
add VG3503J support
this adds basic support. the bootloader on these units is locked down.
until we have a replacement we can do basic testing with these env variables in uboot.
set update_openwrt erase 0xb0020000 0xb073ffff \;tftp 0x81000000 openwrt-lantiq-xway-VG3503J-squashfs.image\;cp.b 0x81000000 0xb0020000 \$(filesize)
set bootcmd cp.b 0xb0020000 0x80002000 0x400000\; go 0x80002000
unfortunatley the bootloader ignores the bootcmd, so autobooting is not possible yet. you need to call "run bootcmd" by hand after each power cycle.
please note that the vdsl firmware is non redistributable. you can find it in the GPL drop that BT provides.
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36315
John Crispin [Thu, 11 Apr 2013 19:17:48 +0000 (19:17 +0000)]
add FE phy firmware
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36314
Luka Perkov [Thu, 11 Apr 2013 16:04:31 +0000 (16:04 +0000)]
This adds Gateworks Laguna family board support. Note that some Laguna boards have SPI flash and others have NOR flash, thus the size/erasesize are detected dynamically.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 36313
John Crispin [Thu, 11 Apr 2013 07:12:37 +0000 (07:12 +0000)]
add missing pinmux patch
Fix lantiq pinmux which affected PCI and USB.
Known affected boards are: ARV4518 and ARV7518.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 36312
Felix Fietkau [Wed, 10 Apr 2013 21:17:33 +0000 (21:17 +0000)]
mac80211: fix a client mode reconnect issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36311
Felix Fietkau [Wed, 10 Apr 2013 16:20:50 +0000 (16:20 +0000)]
cns3xxx: fix USB ehci/ohci platform driver
Update ehci/ohci driver registration to conform to the new platform
drivers.
This fixes missing USB host support in 3.8.x
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 36309
Felix Fietkau [Wed, 10 Apr 2013 16:07:50 +0000 (16:07 +0000)]
kernel: calibrate the TWD timer even when booting with only one CPU, it is used for the watchdog timer base
Fixes booting on single-core CNS3xxx devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36308
Felix Fietkau [Wed, 10 Apr 2013 13:45:12 +0000 (13:45 +0000)]
kernel: keep the igmp proc support even with PROC_STRIPPED, some tools still use it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36307
Felix Fietkau [Wed, 10 Apr 2013 13:26:08 +0000 (13:26 +0000)]
ath9k: fix an AR9580 specific crypto related stability issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36306
Felix Fietkau [Wed, 10 Apr 2013 13:11:33 +0000 (13:11 +0000)]
mac80211: revert the queue length to the default (reduction obsoleted by the use of fq_codel)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36305
Felix Fietkau [Wed, 10 Apr 2013 13:11:29 +0000 (13:11 +0000)]
kernel: switch default qdisc from pfifo_fast to fq_codel and remove pfifo_fast
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36304
Felix Fietkau [Wed, 10 Apr 2013 13:11:25 +0000 (13:11 +0000)]
kernel: keep dropped stats in fq_codel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36303
Felix Fietkau [Wed, 10 Apr 2013 13:11:21 +0000 (13:11 +0000)]
kernel: tune fq_codel defaults for common netdevice speeds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36302
Felix Fietkau [Wed, 10 Apr 2013 13:11:16 +0000 (13:11 +0000)]
kernel: add patches by Dave Täht to reduce buffer size in longer queues to reduce memory pressure
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36301
Florian Fainelli [Tue, 9 Apr 2013 16:16:20 +0000 (16:16 +0000)]
kernel: refresh patches against 3.9-rc6
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36297
Florian Fainelli [Tue, 9 Apr 2013 16:16:16 +0000 (16:16 +0000)]
kernel: add support for PMC PM25LQ032 SPI Flash in m25p80.c
Add support for PMC PM25LQ032 (4MB) SPI Flash used in Hame MPR-A1 and clones.
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36296
Florian Fainelli [Tue, 9 Apr 2013 15:47:01 +0000 (15:47 +0000)]
kernel: backport switch user API changes after r36283
3.3 and 3.6 kernels do not make use of the UAPI headers, still they need
to provide an up-to-date switch.h copy for swconfig to build.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36295
Felix Fietkau [Tue, 9 Apr 2013 14:59:10 +0000 (14:59 +0000)]
qos-scripts: add queue length and quantum limit, suggested by dtaht
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36294
John Crispin [Tue, 9 Apr 2013 14:39:01 +0000 (14:39 +0000)]
unbreak portmapping - typo fix
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36293
Jo-Philipp Wich [Tue, 9 Apr 2013 14:37:55 +0000 (14:37 +0000)]
iwinfo: fix frequency/channel and channel/frequency conversions to properly implement 802.11j
SVN-Revision: 36292
Florian Fainelli [Tue, 9 Apr 2013 14:36:09 +0000 (14:36 +0000)]
buildroot: enable software floating point for MIPS64 targets
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36291
John Crispin [Tue, 9 Apr 2013 14:19:36 +0000 (14:19 +0000)]
move memory detect node to dtsi files
Signed-of-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36290
John Crispin [Tue, 9 Apr 2013 14:19:33 +0000 (14:19 +0000)]
Add Netgear WNCE2001 (OF version)
Add Netgear WNCE2001.
This is a small RT3052 device with 4MB spi flash and 32MB ram.
2 built-in antennas, 1x fastE, no USB, reset & wps switch.
On my model the AP/RT switch is unpopulated, but I verified the gpio
mapping for it.
The stock firmware is running an unprotected tftpd which allows you
to read any file from the filesystem.
Serial port is present on testpads (See image on the wiki page).
There are more testpads below the shield near the SoC, which
may have JTAG.
Slight annoyance: The bootloader is checksumming kernel&rootfs, but
can be tricked by zeroing checksum and length fields in the checksum
partition, see
target/linux/ramips/base-files/lib/preinit/04_disable_wnce2001_flash_checksumming
The manufacturer image is very similar to the DAP one, so I slightly
modified mkdapimg to support generating it.
The resulting
openwrt-ramips-rt305x-wnce2001-squashfs-factory-(worldwide|northamerica).bin
can be used to flash from stock to OpenWRT using the stock firmware
upgrade function, without using the serial port.
http://www.netgear.com/landing/wnce2001.aspx
http://wiki.openwrt.org/toh/netgear/wnce2001
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
SVN-Revision: 36289
John Crispin [Tue, 9 Apr 2013 14:19:28 +0000 (14:19 +0000)]
remove bootargs from dts
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36288
John Crispin [Tue, 9 Apr 2013 14:19:24 +0000 (14:19 +0000)]
add ofpart info to the devicetrees
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36287
John Crispin [Tue, 9 Apr 2013 14:19:20 +0000 (14:19 +0000)]
add sample swconfig portmap
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36286
John Crispin [Tue, 9 Apr 2013 14:19:17 +0000 (14:19 +0000)]
set of_node before registring the switch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36285
John Crispin [Tue, 9 Apr 2013 14:19:13 +0000 (14:19 +0000)]
add portmap support to userland
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36284
John Crispin [Tue, 9 Apr 2013 14:19:09 +0000 (14:19 +0000)]
allow loading port maps from OF
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36283
John Crispin [Tue, 9 Apr 2013 14:19:05 +0000 (14:19 +0000)]
add "swconfig list" support
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36282
Jo-Philipp Wich [Tue, 9 Apr 2013 12:21:12 +0000 (12:21 +0000)]
netifd: fix route / route6 regression (#13303)
SVN-Revision: 36281
Steven Barth [Tue, 9 Apr 2013 12:12:30 +0000 (12:12 +0000)]
Remove deprecated ip6slaac option * use proto=dhcpv6 with reqprefix=no instead
SVN-Revision: 36280
Steven Barth [Tue, 9 Apr 2013 09:45:51 +0000 (09:45 +0000)]
Remove obsoleted ipv6-support meta-package
SVN-Revision: 36279
Steven Barth [Tue, 9 Apr 2013 08:03:08 +0000 (08:03 +0000)]
Adapt default network configuration for IPv6
SVN-Revision: 36278
Steven Barth [Tue, 9 Apr 2013 08:02:55 +0000 (08:02 +0000)]
Enable native IPv6 support by default
SVN-Revision: 36277
Gabor Juhos [Mon, 8 Apr 2013 12:34:17 +0000 (12:34 +0000)]
ramips: TEW-691GR.dts fixes
* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36276
Gabor Juhos [Mon, 8 Apr 2013 12:34:15 +0000 (12:34 +0000)]
ramips: rt3883: enable the AR8216 driver
It is needed for the TEW-69{1,2}GR boards.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36275
Gabor Juhos [Mon, 8 Apr 2013 11:12:04 +0000 (11:12 +0000)]
ramips: add profile for the Omnima EMB-HPM board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36274
Gabor Juhos [Mon, 8 Apr 2013 11:12:03 +0000 (11:12 +0000)]
ramips: OMNI-EMB-HPM.dts fixes
* add mdio-bus and phy nodes
* set phy-handle for the ethernet node
* define flash partiions
* cleanup flash node properties
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36273
Gabor Juhos [Mon, 8 Apr 2013 11:12:02 +0000 (11:12 +0000)]
ramips: add mdio-bus node to rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36272
Gabor Juhos [Mon, 8 Apr 2013 11:12:01 +0000 (11:12 +0000)]
ramips: fix MDIO/PHY handling
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36271
Gabor Juhos [Mon, 8 Apr 2013 08:24:51 +0000 (08:24 +0000)]
ramips: fix console speed for OMNI-EMB-HPM
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36270
Gabor Juhos [Mon, 8 Apr 2013 08:24:50 +0000 (08:24 +0000)]
ramips: avoid invalid pointer dereference in pinmux code
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36269
Gabor Juhos [Mon, 8 Apr 2013 07:11:35 +0000 (07:11 +0000)]
ramips: TEW-692GR.dts fixes
* fix pinmux settings
* remove spi node
* add PCI node
* add nor-flash node
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36268
Felix Fietkau [Sun, 7 Apr 2013 22:05:45 +0000 (22:05 +0000)]
ath9k: fix a tx processing race condition on AR9300+
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36267
Felix Fietkau [Sun, 7 Apr 2013 22:05:41 +0000 (22:05 +0000)]
ath9k_htc: accept firmware versions newer than 1.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36266
Felix Fietkau [Sun, 7 Apr 2013 22:05:36 +0000 (22:05 +0000)]
mac80211: merge an idle handling fix (fixes ath9k_htc client mode), refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36265
Gabor Juhos [Sun, 7 Apr 2013 20:56:22 +0000 (20:56 +0000)]
ramips: add PCI node into RTN56U.dts
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36264
Gabor Juhos [Sun, 7 Apr 2013 20:56:21 +0000 (20:56 +0000)]
ramips: add PCI node for rt3883.dtsi
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36263
Gabor Juhos [Sun, 7 Apr 2013 20:56:20 +0000 (20:56 +0000)]
ramips: rt3883: enable PCI support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36262
Gabor Juhos [Sun, 7 Apr 2013 20:56:18 +0000 (20:56 +0000)]
ramips: fix RT3883 PCI driver
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36261
Gabor Juhos [Sun, 7 Apr 2013 17:05:05 +0000 (17:05 +0000)]
ramips: refresh patches
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36260
Gabor Juhos [Sun, 7 Apr 2013 17:05:04 +0000 (17:05 +0000)]
ramips: add missing cpu-feature-override.h files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36259
Gabor Juhos [Sun, 7 Apr 2013 16:26:27 +0000 (16:26 +0000)]
ramips: fix broken patch name
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36258
Gabor Juhos [Sun, 7 Apr 2013 16:24:33 +0000 (16:24 +0000)]
ramips: fix polarity of GPIO buttons for RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36257
Gabor Juhos [Sun, 7 Apr 2013 15:53:17 +0000 (15:53 +0000)]
x86/generic: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36256
Gabor Juhos [Sun, 7 Apr 2013 15:53:15 +0000 (15:53 +0000)]
x86/generic: switch to 3.8
Only tested within a VM.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36255
Gabor Juhos [Sun, 7 Apr 2013 15:53:13 +0000 (15:53 +0000)]
x86/generic: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36254
Gabor Juhos [Sun, 7 Apr 2013 15:53:11 +0000 (15:53 +0000)]
x86/alix2: remove old kernel configs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36253
Gabor Juhos [Sun, 7 Apr 2013 15:53:09 +0000 (15:53 +0000)]
x86/alix2: switch to 3.8
Tested on an alix2d13 board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36252
Gabor Juhos [Sun, 7 Apr 2013 15:53:08 +0000 (15:53 +0000)]
x86/alix2: add config for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36251
Gabor Juhos [Sun, 7 Apr 2013 15:53:05 +0000 (15:53 +0000)]
x86: add support for 3.8
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36250
Gabor Juhos [Sun, 7 Apr 2013 14:46:11 +0000 (14:46 +0000)]
ramips: add nor-flash node for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36249
Gabor Juhos [Sun, 7 Apr 2013 14:46:10 +0000 (14:46 +0000)]
ramips: fix pinmux settings for the RT-N56U
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36248
Gabor Juhos [Sun, 7 Apr 2013 14:46:09 +0000 (14:46 +0000)]
ramips: pinmux fixes
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36247
Gabor Juhos [Sun, 7 Apr 2013 13:32:37 +0000 (13:32 +0000)]
ramips: remove trailing whitespaces from dts files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36246
Gabor Juhos [Sun, 7 Apr 2013 13:25:38 +0000 (13:25 +0000)]
ramips: handle PCI interrupts in plat_irq_dispatch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36245
John Crispin [Sun, 7 Apr 2013 11:47:03 +0000 (11:47 +0000)]
fix typos inside dts files
Signed-off-by; Tobias Diedrick <ranma@tdiedrich.de>
SVN-Revision: 36244
John Crispin [Sun, 7 Apr 2013 11:46:54 +0000 (11:46 +0000)]
fix default commandline in dts files
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36243
Gabor Juhos [Sun, 7 Apr 2013 11:37:15 +0000 (11:37 +0000)]
ramips: add cfi_cmdset_0002 patches
The parallel flash access on the RT-N56U is broken
without those patches.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36242
Felix Fietkau [Sun, 7 Apr 2013 11:24:30 +0000 (11:24 +0000)]
cns3xxx: remove the watchdog IRQ from the resources, it breaks the driver init and is useful only for testing
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36241
Felix Fietkau [Sun, 7 Apr 2013 10:11:41 +0000 (10:11 +0000)]
gcc: remove the bogus CONFIG_TLS_SUPPORT symbol - TLS support is required by libc.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36240
Felix Fietkau [Sun, 7 Apr 2013 10:11:38 +0000 (10:11 +0000)]
uClibc: unbreak ld-uClibc on non-64bit platforms
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36239
Gabor Juhos [Sun, 7 Apr 2013 08:19:10 +0000 (08:19 +0000)]
ramips: remove top-level {address,size}-cells properties from .dts files
Those are defined in the SoC specific .dtsi files.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36237
Hauke Mehrtens [Sat, 6 Apr 2013 22:22:26 +0000 (22:22 +0000)]
brcm47xx: use old partition names again for kernel 3.8
This fixes sysupgrade. The partition names are used all over the Internet in various howtos.
Thank you russell for spotting this problem.
SVN-Revision: 36235
Hauke Mehrtens [Sat, 6 Apr 2013 19:02:25 +0000 (19:02 +0000)]
brcm47xx: fix error in board detection when nvram is not available.
SVN-Revision: 36234
Gabor Juhos [Sat, 6 Apr 2013 17:33:03 +0000 (17:33 +0000)]
linux/3.8: implement pcibios_get_phb_of_node for MIPS
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36233
Gabor Juhos [Sat, 6 Apr 2013 17:33:00 +0000 (17:33 +0000)]
linux/3.8: backport devm_ioremap_resource from 3.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36232
Gabor Juhos [Sat, 6 Apr 2013 17:19:35 +0000 (17:19 +0000)]
ramips: fix ethernet switch node in DIR-645.dts
Fix a typo in the node name and add vendor prefix
for the compatible string.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36231
Gabor Juhos [Sat, 6 Apr 2013 17:19:31 +0000 (17:19 +0000)]
generic: rtl8367: add compatible string with vendor prefix
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36230
Gabor Juhos [Sat, 6 Apr 2013 17:03:09 +0000 (17:03 +0000)]
generic: rtl8367b: fix rtl8367b_extif_init_of
* disable external interface if its property is not present
* show an error message if the extif property is not valid
* use proper error values intead of -1
* fix memory leak
* wrap long lines
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36229
Gabor Juhos [Sat, 6 Apr 2013 16:56:47 +0000 (16:56 +0000)]
linux/3.8: add more missing symbols
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36228
Gabor Juhos [Sat, 6 Apr 2013 16:55:25 +0000 (16:55 +0000)]
package/kernel: only include i2c-of if CONFIG_OF enabled
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36227
Gabor Juhos [Sat, 6 Apr 2013 16:38:36 +0000 (16:38 +0000)]
linux/3.8: add missing symbol
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36226
Gabor Juhos [Sat, 6 Apr 2013 13:11:44 +0000 (13:11 +0000)]
kernel: fix md5sum for 3.8.6
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36225
Gabor Juhos [Sat, 6 Apr 2013 12:41:06 +0000 (12:41 +0000)]
kernel: Allow talitos crypto hw module selection
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36224
Gabor Juhos [Sat, 6 Apr 2013 12:37:40 +0000 (12:37 +0000)]
ramips: remove spi node from RTN56.dts
The RT-N56U board uses a parallel flash.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36223
Gabor Juhos [Sat, 6 Apr 2013 12:37:38 +0000 (12:37 +0000)]
ramips: fix ethernet switch node in RTN56U.dts
The RT-N56U uses an RTL8367M switch.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36222
Gabor Juhos [Sat, 6 Apr 2013 12:37:37 +0000 (12:37 +0000)]
ramips: rt3883: enable the RTL8367 driver
That is needed by the Asus RT-N56U board.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36221
Gabor Juhos [Sat, 6 Apr 2013 12:37:36 +0000 (12:37 +0000)]
generic: rtl8367: allow to load extif config from OF
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36220
Gabor Juhos [Sat, 6 Apr 2013 12:37:34 +0000 (12:37 +0000)]
generic: rtl8367: fix a typo in MODULE_DEVICE_TABLE macro
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36219
Gabor Juhos [Sat, 6 Apr 2013 12:37:32 +0000 (12:37 +0000)]
generic: rtl8367: add vendor prefix to the compatible string
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36218
projects / oweals / openwrt.git / log