Richard Retanubun [Fri, 23 Jan 2009 15:47:13 +0000 (10:47 -0500)]
Coldfire: M5271EVB: Remove usage of CONFIG_SYS_FECI2C
Discontinue the use of CONFIG_SYS_FECI2C (only used by M5271EVB).
Use read-modify-write to activate the FEC pins without disabling I2C.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Richard Retanubun [Fri, 23 Jan 2009 14:45:34 +0000 (09:45 -0500)]
Coldfire: cmd_bdinfo cleanup
CONFIG_M68K bdinfo cleanup:
Fixed compiler warning about baudrate printing.
format '%d' expects type 'int', but argument 2 has type 'long unsigned int'.
Added printing of "cpufreq"
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Richard Retanubun [Fri, 23 Jan 2009 14:27:00 +0000 (09:27 -0500)]
Coldfire: Fix half-baud UART by adding M5271 to Coldfire v2 core list
Added the CONFIG_M5271 to the list of Coldfire V2 processor. This
was causing the bus clock (not CPU clock) to be declared twice as
fast as it actually is. This causes UARTS to operate at half the
specified baudrate.
Signed-off-by: Richard Retanubun <RichardRetanubun@RuggedCom.com>
Wolfgang Denk [Tue, 3 Feb 2009 22:16:15 +0000 (23:16 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Remy Bohmer [Sun, 1 Feb 2009 11:27:53 +0000 (12:27 +0100)]
Compile warning fix in onenand_uboot.h
Regression since merge window after 2009.01
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Thu, 29 Jan 2009 05:33:55 +0000 (06:33 +0100)]
USB: Add EHCI support for VCT EHCI controller (really with driver now)
Somehow I missed the real driver part in my last patch version. This patch
now adds the driver.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Cliff Cai [Sat, 29 Nov 2008 23:22:38 +0000 (18:22 -0500)]
Blackfin: add driver for on-chip MMC/SD controller
This is a port of the Linux Blackfin on-chip SDH driver to U-Boot.
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:47:34 +0000 (22:47 -0400)]
Blackfin: add port muxing for BF51x SPI
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 6 Jan 2009 11:16:19 +0000 (06:16 -0500)]
Blackfin: output booting source when booting
Knowing the booting source of the part is useful, especially when the part
can switch dynamically between sources.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 11 Dec 2008 11:30:46 +0000 (06:30 -0500)]
Blackfin: set default CONFIG_ENV_SPI_CS based on bootrom
Set the default CONFIG_ENV_SPI_CS value to match the SPI CS that is used by
the Blackfin on-chip bootrom to boot out of SPI flash.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 11 Dec 2008 09:06:26 +0000 (04:06 -0500)]
Blackfin: update asm-blackfin/posix_types.h to latest Linux version
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 6 Dec 2008 07:54:52 +0000 (02:54 -0500)]
Blackfin: add port I bits
Some people need to access port I, so make sure the pins are defined.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Sonic Zhang [Thu, 27 Nov 2008 03:16:45 +0000 (22:16 -0500)]
Blackfin: add driver for on-chip ATAPI controller
This is a port of the Linux Blackfin on-chip ATAPI driver to U-Boot.
Signed-off-by: Sonic Zhang <Sonic.Zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 27 Nov 2008 02:43:06 +0000 (21:43 -0500)]
Blackfin: add driver for on-chip NAND controller
This is a port of the Linux Blackfin on-chip NFC driver to U-Boot.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 12 Nov 2008 12:18:15 +0000 (07:18 -0500)]
Blackfin: build with -mno-fdpic
Use the -mno-fdpic flag so that any Blackfin toolchain can be used to build
up u-boot, including ones that output FDPIC ELF by default.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 11 Nov 2008 10:43:57 +0000 (05:43 -0500)]
Blackfin: fix up EBIU defines
The EBIU defines for EBSZ 256/512 were incorrect.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 5 Nov 2008 17:45:24 +0000 (12:45 -0500)]
Blackfin: use 8/16/32 bit transfer widths in dma_memcpy()
Rather than using 8bit transfers for everything, use 8/16/32 bit transfers
as usable with the source/destination addresses and the count size.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 5 Nov 2008 13:50:23 +0000 (08:50 -0500)]
Blackfin: only flag L1 instruction for DMA memcpy
The performance difference from doing an 8 bit DMA memcpy vs an optimized
core memcpy can be pretty big when you add in the overhead of setting up the
MDMA registers, cache flushes, etc... So only use dma_memcpy() when we
actually require it.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 5 Nov 2008 12:20:37 +0000 (07:20 -0500)]
Blackfin: dma_memcpy(): fix random failures
We have to make sure the DMA channel is actually disabled in hardware before
attempting to reprogram it. Otherwise the new settings are ignored and we
end up with random hangs/failures.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 4 Nov 2008 05:04:03 +0000 (00:04 -0500)]
Blackfin: rewrite cache handling functions
Take the cache flush functions from the kernel as they use hardware loops in
order to get optimal performance.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 4 Nov 2008 03:30:05 +0000 (22:30 -0500)]
Blackfin: setup bi_enetaddr for single nets
For systems with CONFIG_NET_MULTI disabled, bi_enetaddr does not get setup
based on $ethaddr, so set it up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 25 Oct 2008 02:48:47 +0000 (22:48 -0400)]
Blackfin: cache core/system clock values
Calculating the clocks requires a bit of calls to gcc math functions, so
cache the values after the first run since they'll most likely never
change once U-Boot is up and running.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Fri, 24 Oct 2008 22:18:16 +0000 (18:18 -0400)]
Blackfin: enable --gc-sections
Start building all Blackfin boards with -ffunction-sections/-fdata-sections
and linking with --gc-sections.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 21 Oct 2008 01:08:54 +0000 (21:08 -0400)]
Blackfin: dont check baud if it wont actually get used
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Tue, 14 Oct 2008 11:54:09 +0000 (07:54 -0400)]
Blackfin: add driver for on-chip SPI controller
This fills out the SPI backend for the Blackfin on-chip SPI peripheral.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 18 Oct 2008 09:33:51 +0000 (05:33 -0400)]
Blackfin: only build post code when CONFIG_POST
Save some time by using CONFIG_POST in the Makefile rather than C files.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 8 Jan 2009 16:57:57 +0000 (11:57 -0500)]
Blackfin: bfin_mac: cleanup pointer/casts for aliasing issues
Redo how pointers are managed to get rid of ugly casts and strict pointer
aliasing issues that are highlighted by gcc 4.3.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Tue, 9 Dec 2008 22:46:21 +0000 (17:46 -0500)]
Blackfin: bfin_mac: convert CONFIG_BFIN_MAC_RMII to CONFIG_RMII
No point in having a Blackfin-specific define "CONFIG_BFIN_MAC_RMII" that
does exactly the same thing as common "CONFIG_RMII".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Wed, 5 Nov 2008 11:36:15 +0000 (06:36 -0500)]
Blackfin: bfin_mac: use common debug()
Rather then defining our own DEBUGF(), just use the common debug().
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Mon, 20 Oct 2008 17:59:51 +0000 (13:59 -0400)]
Blackfin: bfin_mac: respect CONFIG_PHY_{ADDR,CLOCK_FREQ}
Rather than having the on-chip MAC hardcoded to phy address 1 and a speed
of 2.5mhz, use these as defaults if the board doesn't specify otherwise.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Tue, 14 Oct 2008 08:52:00 +0000 (04:52 -0400)]
Blackfin: bfin_mac: cleanup MII/PHY functions
Cleanup and rewrite the MII/PHY related functions so that we can reuse the
existing common linux/miiphy.h code and hook into the `mii` command.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Tue, 14 Oct 2008 04:31:30 +0000 (00:31 -0400)]
Blackfin: bfin_mac: set MDCDIV based on SCLK
Rather than hardcoding MDCDIV to 24 (which is correct for ~125mhz SCLK),
use the real algorithm so it gets set correctly regardless of SCLK.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Sun, 1 Feb 2009 20:38:07 +0000 (21:38 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sun, 1 Feb 2009 20:31:37 +0000 (21:31 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Wolfgang Denk [Sun, 1 Feb 2009 20:24:38 +0000 (21:24 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-ixp
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 08:10:48 +0000 (09:10 +0100)]
ixp: move serial to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 08:04:58 +0000 (09:04 +0100)]
ixp: move pci init in arm/board instead of cpu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 07:56:49 +0000 (08:56 +0100)]
ixp: move pci drivers to drivers/pci
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 07:53:44 +0000 (08:53 +0100)]
ixp: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 07:53:44 +0000 (08:53 +0100)]
ixp: add missing os define
need by arm-elf toolchains and no impact on the arm-linux one
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 08:53:39 +0000 (09:53 +0100)]
ixp: remove the option to include the Microcode
instead the board will have to load it from flash or ram
which will be specified by npe_ucode env var
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 30 Jan 2009 08:45:23 +0000 (09:45 +0100)]
ixp/npe: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:58:04 +0000 (21:58 +0100)]
SX1: add hardware V2 support
In the V2 the 2 flash has been replace by one 32MB flash
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:58:03 +0000 (21:58 +0100)]
SX1: Fix second flash mapping
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:58:03 +0000 (21:58 +0100)]
SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:57:59 +0000 (21:57 +0100)]
move Samsung's board to board/samsung
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 29 Jan 2009 11:07:21 +0000 (12:07 +0100)]
move ARM Ltd. to vendor dir
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Larry Johnson [Wed, 28 Jan 2009 20:30:37 +0000 (15:30 -0500)]
ppc4xx: Clean up configuration file for Korat board
This patch updates the default environmental variables for the
Korat PPC 440EPx board, and makes additional minor fixes.
Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Larry Johnson [Wed, 28 Jan 2009 20:30:02 +0000 (15:30 -0500)]
ppc4xx: Add variable "korat_usbcf" for Korat board
The new environment variable "korat_usbcf" selects the USB
port used by the Korat board's CompactFlash controller.
Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Gunnar Rangoy [Fri, 23 Jan 2009 11:56:31 +0000 (12:56 +0100)]
AVR32: macb - Search for PHY id
This patch adds support for searching through available PHY-addresses in
the macb-driver. This is needed for the ATEVK1100 evaluation board,
where the PHY-address will be initialized to either 1 or 7.
This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
enabled tells the driver to search for the PHY address.
Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
Signed-off-by: Olav Morken <olavmrk@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Olav Morken [Fri, 23 Jan 2009 11:56:26 +0000 (12:56 +0100)]
Fix IP alignment problem
This patch removes volatile from:
volatile IP_t *ip = (IP_t *)xip;
Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
using volatile, which causes an exception since xip isn't aligned on a word
boundary.
Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
Signed-off-by: Olav Morken <olavmrk@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ron Madrid [Thu, 29 Jan 2009 00:17:21 +0000 (16:17 -0800)]
Marvell
88E1118 interrupt fix
This patch adjusts the LED control so that interrupt lines are not reading LEDs
and effectively causing indefinite interrupts to the controller.
Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Stefan Roese [Wed, 21 Jan 2009 16:14:26 +0000 (17:14 +0100)]
net: smc911x.c: Add LAN9211 to chip_ids[] array
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Tue, 27 Jan 2009 21:53:39 +0000 (16:53 -0500)]
Move is_valid_ether_addr() to include/net.h
Import the is_valid_ether_addr() function from the Linux kernel.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Michal Simek [Mon, 5 Jan 2009 11:25:13 +0000 (12:25 +0100)]
net: Sort Makefile labels
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Wed, 28 Jan 2009 22:14:22 +0000 (23:14 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Wed, 28 Jan 2009 22:06:42 +0000 (23:06 +0100)]
85xx: Fix compile breakage with sbc8540 and sbc8560
This fixes an error which raises just a warning:
sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Wed, 28 Jan 2009 18:48:55 +0000 (13:48 -0500)]
SPD823TS: do not define CONFIG_CMD_ENV
Since the SPD823TS board does not actually have any writable flash to save
its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
disabled.
This fixes the build error:
common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
common/cmd_nvedit.c:557: undefined reference to `saveenv'
make: *** [u-boot] Error 1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Dirk Behme [Wed, 28 Jan 2009 20:40:16 +0000 (21:40 +0100)]
OMAP3: Add Zoom1 board support
Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Wed, 28 Jan 2009 20:39:58 +0000 (21:39 +0100)]
OMAP3: Add Pandora support
Add Pandora support.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Wed, 28 Jan 2009 20:39:58 +0000 (21:39 +0100)]
OMAP3: Add EVM board
Add EVM board support.
Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Wed, 28 Jan 2009 20:39:57 +0000 (21:39 +0100)]
OMAP3: Add Overo board
Add Overo board support.
Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Tue, 27 Jan 2009 17:19:12 +0000 (18:19 +0100)]
OMAP3: Add common power code, README, and BeagleBoard
Add BeagleBoard support, common power code and README.
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Wolfgang Denk [Wed, 28 Jan 2009 20:09:46 +0000 (21:09 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Wolfgang Denk [Wed, 28 Jan 2009 20:09:32 +0000 (21:09 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Kumar Gala [Wed, 28 Jan 2009 14:31:10 +0000 (08:31 -0600)]
85xx: Fix compile breakage with MPC8540EVAL
Configuring for MPC8540EVAL board...
mpc8540eval.c: In function 'checkboard':
mpc8540eval.c:53: error: invalid operands to binary /
make[1]: *** [mpc8540eval.o] Error 1
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Bryan Wu [Mon, 19 Jan 2009 04:04:27 +0000 (23:04 -0500)]
usb_scan_devices: fix output with no devices
We should check the return of usb_new_device() so that if no USB device is
found, we print out the right message rather than always saying "new usb
device found".
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Thu, 22 Jan 2009 09:11:21 +0000 (10:11 +0100)]
USB: Add high-speed (480Mb/s) to all USB related outputs
With this patch the USB related connection speed output ("usb tree" command and
debug output) is now high-speed enabled.
This patch also fixes a compilation warning when debugging is enabled.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:19 +0000 (17:12 +0100)]
USB: Add dcache support to the EHCI driver
This patch adds routines to handle (flush/invalidate) the dcache for the
QH and qTD structures and data buffers. This is needed on platforms using
this EHCI support with dcache enabled (like the MIPS VCT board port).
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:28 +0000 (17:12 +0100)]
USB: Add EHCI support for VCT EHCI controller
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:10 +0000 (17:12 +0100)]
USB: Add config option to call ehci_hcd_init() again after EHCI reset
This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
to call ehci_hcd_init() again after ehci_reset() is executed. This
is needed for the upcoming VCT EHCI support which needs to re-init
the hcd part again after the EHCI CMD_RESET is executed.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:01 +0000 (17:12 +0100)]
USB: Fix speed detection on EHCI cntr with root hub transaction translators
This patch fixes an issue that the speed of USB devices was not detected
correctly on some EHCI controllers. This will be used on the upcoming VCT
EHCI support.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:20 +0000 (09:41 +0530)]
usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
configuration file.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:16 +0000 (09:41 +0530)]
usb : musb : Enabling DM6446 (TI DaVinci) USB module power
Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
controller hook up to USB core layer.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:13 +0000 (09:41 +0530)]
usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
Adding DM6446 (TI DaVinci) platform specific USB functionality for
USB Phy and VBUS initialization.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:09 +0000 (09:41 +0530)]
usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
platform.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:03 +0000 (09:41 +0530)]
usb : musb : Adding host controller driver for Mentor USB controller
Adding Mentor USB core functionality and Mentor USB Host controller
functionality for Mentor USB OTG controller (musbhdrc).
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Mike Frysinger [Thu, 1 Jan 2009 23:27:27 +0000 (18:27 -0500)]
usb.h: use standard __LITTLE_ENDIAN from Linux headers
Rather than forcing people to define a custom "LITTLEENDIAN", just use the
__LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
already setting up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Wed, 31 Dec 2008 09:33:56 +0000 (10:33 +0100)]
USB ehci ixp4xx support
Add USB ehci ixp4xx host controller. Test on ixdp465 board.
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Wed, 31 Dec 2008 09:33:22 +0000 (10:33 +0100)]
USB ehci remove infinite loop and use handshake function
USB ehci code cleanup. Use handshake instead of infinite while loop
to check the STD_ASS status
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Wed, 31 Dec 2008 09:32:41 +0000 (10:32 +0100)]
Add initial support for USB ehci pci
Add USB ehci pci support. This patch doesn't include any
pci_ids and it is not tested on real hardware.
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Bryan Wu [Fri, 2 Jan 2009 00:48:07 +0000 (19:48 -0500)]
usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive
000016244373FFB4
does not like to be reset, so check for it.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 06:45:35 +0000 (12:15 +0530)]
usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
This patch populates the 'priv' field of the USB keyboard device_t
structure. The 'priv' field is populated with the address of the
'struct usb_device' structure that represents the USB device.
The 'priv' field can then be used in the 'usb_event_poll' function to
determine the USB device that requires to be polled. An
example of its usage in 'usb_event_poll' function is as below.
device_t *dev;
struct usb_device *usb_kbd_dev;
<snip>
dev = device_get_by_name("usbkbd");
usb_kbd_dev = (struct usb_device *)dev->priv;
iface = &usb_kbd_dev->config.if_desc[0];
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Thu, 18 Dec 2008 09:05:37 +0000 (10:05 +0100)]
USB change speed
USB changes the speed according to the port status
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Remy Böhmer [Sat, 13 Dec 2008 21:51:58 +0000 (22:51 +0100)]
EHCI fix code and ixp4xx test.
USB ehci configuration parameter:
#define CONFIG_CMD_USB 1
#define CONFIG_USB_STORAGE 1
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_IXP4XX 1
#define CONFIG_EHCI_IS_TDI 1
#define CONFIG_EHCI_DESC_BIG_ENDIAN 1
#define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
#define CONFIG_LEGACY_USB_INIT_SEQ 1
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
=> usb tree
Device Tree:
1 Hub (1.5MBit/s, 0mA)
| u-boot EHCI Host Controller
|
|+-2 Mass Storage (12MBit/s, 100mA)
Sony Storage Media
0C07040930296
=>
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
michael [Thu, 11 Dec 2008 12:43:55 +0000 (13:43 +0100)]
[PATCH] This patch add varius fix to the ehci.
- fix ehci_readl, ehci_writel
- introduce new define in ehci.h
- introduce the handshake function for waiting on a register
- fix usb_ehci_fsl with the new HC_LENGTH macro
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
michael [Wed, 10 Dec 2008 16:55:19 +0000 (17:55 +0100)]
[PATCH] Fix EHCI usb. I start to test on a
IXP465 board and I find some errors in the code. This
patch fix:
- descriptor initizialization (config, interface and endpoint
must be one next-to the other when the USB_DT_CONFIG message
is send.
- FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
- Introduce the linux version of the usb_config_descriptor and
usb_interface descriptor. This descriptor does't contains
u-boot extension.
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Fri, 28 Nov 2008 12:22:09 +0000 (13:22 +0100)]
USB ehci freescale support
Add USB ehci freescale support
Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Fri, 28 Nov 2008 12:20:46 +0000 (13:20 +0100)]
USB ehci core support
Add USB ehci core support
Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Fri, 28 Nov 2008 12:19:19 +0000 (13:19 +0100)]
Prepare USB layer for ehci
Prepare USB layer for ehci support
Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Wed, 10 Dec 2008 14:52:06 +0000 (15:52 +0100)]
USB storage cleanup patch
Cleanup usb storage
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Mike Frysinger [Sun, 12 Oct 2008 10:02:55 +0000 (06:02 -0400)]
Blackfin: fixup misc warnings such as printf's and missing casts
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 13 Oct 2008 02:09:26 +0000 (22:09 -0400)]
Blackfin: convert old boards to use COBJS-y Makefile style
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:38:37 +0000 (22:38 -0400)]
Blackfin: bf533-stamp: rewrite resource swap logic
The old swap function tended to clobber unrelated pins and screw up masks.
Rewrite the thing from scratch so it only uses the resources it needs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:08:42 +0000 (22:08 -0400)]
Blackfin: bootldr: implement BF53x/BF56x LDR loader
The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
arbitrary memory locations, so implement a basic one in software.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:05:42 +0000 (22:05 -0400)]
Blackfin: implement real write support for OTP
Now that real documentation has been released for the OTP interface and
the on-chip ROM wrt writing/timings, implement support for reading/writing
as well as dumping/locking.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:04:05 +0000 (22:04 -0400)]
Blackfin: update on-chip ROM API
This brings the API for the on-chip ROM in line with the toolchain and
hardware documentation.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:52:17 +0000 (21:52 -0400)]
Blackfin: allow serial console to be disabled
Some devices have no UART device pulled out, so allow people to disable the
driver completely in favor of other methods (like JTAG-console).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:51:20 +0000 (21:51 -0400)]
Blackfin: support console-over-JTAG
The Blackfin JTAG has the ability to pass data via a back-channel without
halting the processor. Utilize that channel to emulate a console.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:49:06 +0000 (21:49 -0400)]
Blackfin: handle new anomalies with reset
Workaround fun new anomalies related to software reset of the processor.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
projects / oweals / u-boot.git / log