oweals/u-boot.git
6 years agoboard: eets: pdu001: Fix wrong default value in Kconfig
Eugeniu Rosca [Sat, 19 May 2018 12:13:51 +0000 (14:13 +0200)]
board: eets: pdu001: Fix wrong default value in Kconfig

After importing linux v4.16-rc1 commit 2c37e08464a8 ("kconfig: Warn if
choice default is not in choice"), Kconfig complains:

scripts/kconfig/conf  --syncconfig Kconfig
board/eets/pdu001/Kconfig:22:warning:        \
  choice default symbol 'PDU001_RUN_LED_RED' \
  is not contained in the choice

This looks to be caused by a typo. Fix it.

Fixes: 85ab0452fefc ("arm: add support for PDU001")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Felix Brack <fb@ltec.ch>
Tested-by: Felix Brack <fb@ltec.ch>
6 years agokconfig: re-sync with Linux 4.17-rc4
Eugeniu Rosca [Sat, 19 May 2018 12:13:50 +0000 (14:13 +0200)]
kconfig: re-sync with Linux 4.17-rc4

Align Kconfig to Linux 4.17-rc4 with minimal impact on non-kconfig files.

Previous Kconfig sync was done by commit bf7ab1e70fd762 ("kconfig:
re-sync with Linux 4.10") and it achieved almost perfect alignment with
a few (intended) exceptions, caused by below U-boot commits:

[A] v2015.04 5f9eb2207500 ("kbuild: remove scripts/multiconfig.sh")
[B] v2015.07 20c20826efab ("Kconfig: Enable usage of escape char '\' in string values")
[C] v2016.01 da58dec86616 ("Various Makefiles: Add SPDX-License-Identifier tags")
[D] v2016.03 5b8031ccb4ed ("Add more SPDX-License-Identifier tags")
[E] v2016.03 192bc6948b02 ("Fix GCC format-security errors and convert sprintfs.")

Here is the list of Kconfig commits which followed the v4.10 alignment:

[F] v2018.01 0931ed3c0d0f ("kconfig/symbol.c: use correct pointer type argument for sizeof")
[G] v2018.03 1414e09b4f25 ("kconfig: revert change that was not needed for -Wformat-security")
[H] v2018.05 83d290c56fab ("SPDX: Convert all of our single license tags to Linux Kernel style")

Commit [F] was subsequently applied to Linux kernel as commit [I]
with the same patch id, so it won't contribute to further misalignment.

[I] v4.15-rc1 88127dae6ed9 ("kconfig/symbol.c: use correct pointer type argument for sizeof")

Commit [G] is a Kconfig-specific revert of commit [E].
Commit [H] relocated and reformatted the license doing no functional change.

In summary, the only functional change that makes U-boot Kconfig
diverge from Linux Kconfig is commit [B]. After a brief analysis,
the purpose of [B] seems to be placing "\n" literals in string symbols
like CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" in order to pass
them directly to printf and expect correct output at runtime. Currently,
Linux doesn't seem to have this requirement, so for the moment [B] looks
like a U-boot specific feature/fix. From point of view of further Kconfig
alignment and backporting efforts, it is highly desired that commits
like [B] are propagated to Linux and any Kconfig fixes/features are
contributed to Linux kernel first. This specific Kconfig re-sync just
keeps [B] in place.

Contrary to 4.10 Kconfig re-sync (which achieves zero non-kconfig
changes), 4.17-rc4 re-sync does some amount of updates in Kbuild
(striving to keep them at minimum), due to a number of reasons:
* Kbuild is affected by the removal of Kconfig "*shipped" files and now
  requires flex and bison pre-installed on the host.
* PYTHON{2,3} variables are defined in top-level Makefile as
  prerequisite for running the newly developed Kconfig unit tests.
* silentoldconfig becomes an "internal implementation detail" deprecated
  for external use, being renamed to syncconfig.

The exact non-kconfig files touched by this commit are:

$ git show --format="" --stat -- ':!scripts/kconfig'
 .gitignore             |  2 ++
 Makefile               |  9 +++++++--
 scripts/Makefile.build | 11 +++++++++++
 scripts/Makefile.lib   | 41 ++++++++++++-----------------------------

The imported Linux commits touching the above files are:

c054be10ffdbd5   ("remove gperf left-overs from build system")
73a4f6dbe70a1b   ("kbuild: add LEX and YACC variables")
033dba2ec06c47   ("kbuild: prepare to remove C files pre-generated by flex and bison")
eea199b445f64c   ("kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX")
e71de5ee08dcb0   ("kbuild: remove remaining use of undefined YACC_PREFIX")
d59fbbd09d5d6b   ("kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)")
911a91c39cabcb H ("kconfig: rename silentoldconfig to syncconfig")
59889300274569   (".gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore")
9a8dfb394c0467   ("kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile")
833e622459432e H ("genksyms: generate lexer and parser during build instead of shipping")
b23d1a241f4eb4 H ("kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically")
e9781b52d4e0e3 H ("kbuild: add PYTHON2 and PYTHON3 variables")

The commits marked with 'H' are assessed as "hard" (build will fail)
prerequisites and the rest of them are assessed as "soft" prerequisites
for the re-sync. In spite of relatively high number of non-H commits,
they belong to this Kconfig update topic-wise and decrease the number of
cherry pick conflicts for many commits in this series. Additional effort
can be put in eliminating the soft prerequisites, if really needed.

The commits which contributed to this Kconfig re-sync are listed below.
Whenever a conflict resolution has been performed (mostly by hand, but
sometimes automatically by git), it is revealed by the '!' sign in the
second column, which means a patch id mismatch between Linux and U-boot
commits:

9be3213b14d44f   ("gconfig: remove misleading parentheses around a condition")
ff85a1a80e0034   ("kconfig: Check for libncurses before menuconfig")
ad8181060788c8   ("kconfig: fix sparse warnings in nconfig")
cb77f0d623ff33 ! ("scripts: Switch to more portable Perl shebang")
bb3290d91695bb ! ("Remove gperf usage from toolchain")
c054be10ffdbd5   ("remove gperf left-overs from build system")
b24413180f5600 ! ("License cleanup: add SPDX GPL-2.0 license identifier to files with no license")
9059a3493efea6 ! ("kconfig: fix relational operators for bool and tristate symbols")
2c37e08464a850   ("kconfig: Warn if choice default is not in choice")
33ca1a24866373   ("kconfig: Document the 'menu' struct")
52aede4ba5efd1   ("kconfig: Document the 'symbol' struct")
c873443430ebd1   ("kconfig: Sync zconf.y with zconf.tab.c_shipped")
9a826842ff2fbd   ("kconfig: Rename menu_check_dep() to rewrite_m()")
fa8cedaef814ce   ("kconfig: Clarify expression rewriting")
f77850d3fe0c96   ("kconfig: Clean up modules handling and fix crash")
e3b03bf29d6b99   ("kconfig: display recursive dependency resolution hint just once")
73a4f6dbe70a1b ! ("kbuild: add LEX and YACC variables")
033dba2ec06c47 ! ("kbuild: prepare to remove C files pre-generated by flex and bison")
29c833061c1d8c   ("kconfig: generate lexer and parser during build instead of shipping")
26e47a3c11a25c   ("kconfig: Don't leak symbol names during parsing")
24161a6711c945   ("kconfig: Don't leak 'source' filenames during parsing")
bc28fe1d5ede88   ("kconfig: Don't leak 'option' arguments during parsing")
0724a7c32a54e3   ("kconfig: Don't leak main menus during parsing")
ae7440ef0c8013   ("kconfig: Fix automatic menu creation mem leak")
5b1374b3b3c2fc   ("kconfig: Fix expr_free() E_NOT leak")
7cf33f88e29410   ("kconfig: Fix choice symbol expression leak")
05cccce580456d   ("kconfig: Document automatic submenu creation code")
0735f7e5def2ab   ("kconfig: Document important expression functions")
df60f4b92d3d0b   ("kconfig: Remove menu_end_entry()")
b92d804a51796b   ("kconfig: drop 'boolean' keyword")
6479f327dea60d   ("kconfig: Warn if there is more than one help text")
52e58a3caeba5d   ("kconfig: make input_mode static")
5a3dc717b3c785   ("kconfig: make xfgets() really static")
84dd95d4f87a0d   ("kconfig: make conf_unsaved a local variable of conf_read()")
765f4cdef6f80d   ("kconfig: use default 'yy' prefix for lexer and parser")
eea199b445f64c   ("kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX")
e71de5ee08dcb0   ("kbuild: remove remaining use of undefined YACC_PREFIX")
d59fbbd09d5d6b ! ("kbuild: replace hardcoded bison in cmd_bison_h with $(YACC)")
3e41ba05b6d60c   ("kconfig: Document SYMBOL_OPTIONAL logic")
d3465af60f4471   ("kconfig: Clarify choice dependency propagation")
9d1a9e8bc18bea   ("kconfig: Document 'if' flattening logic")
b53688014e3325   ("kconfig: Clarify menu and 'if' dependency propagation")
d0fd0428ecf04b   ("kconfig: fix make xconfig when gettext is missing")
312ee68752faaa   ("kconfig: announce removal of oldnoconfig if used")
1ccb27143360bd   ("kconfig: make "Selected by:" and "Implied by:" readable")
cedd55d49dee94 ! ("kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help")
1b9eda2e4892cb   ("kconfig: Warn if help text is blank")
cb67ab2cd2b8ab   ("kconfig: do not write choice values when their dependency becomes n")
4f208f392103e8   ("kconfig: show '?' prompt even if no help text is available")
cd58a91def2acc   ("kconfig: remove 'config*' pattern from .gitignnore")
d2a04648a5dbc3   ("kconfig: remove check_stdin()")
f3ff6fb5db68bc   ("kconfig: echo stdin to stdout if either is redirected")
9e3e10c725360b   ("kconfig: send error messages to stderr")
d717f24d8c6808   ("kconfig: add xrealloc() helper")
523ca58b7db2e3   ("kconfig: remove const qualifier from sym_expand_string_value()")
cd81fc82b93fa4   ("kconfig: add xstrdup() helper")
f4bc1eefc1608e   ("kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list")
bf0bbdcf100322   ("kconfig: Don't leak choice names during parsing")
1a90ce36c6eff6   ("kconfig: Update ncurses package names for menuconfig")
5ae6fcc4bb82bd   ("kconfig: fix line number in recursive inclusion error message")
07a422bb213adb ! ("kbuild: restore autoksyms.h touch to the top Makefile")
9a47ceec543bfb   ("kconfig: clean-up reverse dependency help implementation")
d9119b5925a03b   ("kconfig: Print reverse dependencies in groups")
f467c5640c29ad   ("kconfig: only write '# CONFIG_FOO is not set' for visible symbols")
59a80b5e892dde   ("kconfig: do not call check_conf() for olddefconfig")
4bb3a5b085cd6f   ("kconfig: remove unneeded input_mode test in conf()")
99f0b6578bab44   ("kconfig: remove redundant input_mode test for check_conf() loop")
2aad9b89621386   ("kconfig: hide irrelevant sub-menus for oldconfig")
81d2bc2273052e   ("kconfig: invoke oldconfig instead of silentoldconfig from local*config")
911a91c39cabcb ! ("kconfig: rename silentoldconfig to syncconfig")
2a61625835c7c8 ! ("kconfig: remove redundant streamline_config.pl prerequisite")
022a4bf6b59dfd   ("kconfig: tests: add framework for Kconfig unit testing")
1903c511905984   ("kconfig: tests: add basic choice tests")
49ac3c0c3aa3b7   ("kconfig: tests: test automatic submenu creation")
b76960c0f6b25d   ("kconfig: tests: test if new symbols in choice are asked")
930c429a656fdb   ("kconfig: tests: check unneeded "is not set" with unmet dependency")
ee236610653ede   ("kconfig: tests: check visibility of tristate choice values in y choice")
beaaddb625400e   ("kconfig: tests: test defconfig when two choices interact")
3e4888c2e3d77d   ("kconfig: tests: test randconfig for choice in choice")
29c434f367ea7b   ("kconfig: tests: test if recursive dependencies are detected")
e2c75e7667c737   ("kconfig: tests: test if recursive inclusion is detected")
f622f827958162   ("kconfig: warn unmet direct dependency of tristate symbols selected by y")
f8f69dc0b4e070   ("kconfig: make unmet dependency warnings readable")
26561514cc9def   ("kconfig: do not include both curses.h and ncurses.h for nconfig")
32a94b8b0c3e5a   ("kconfig: remove duplicated file name and lineno of recursive inclusion")
379a8eb8eb1a55   ("kconfig: detect recursive inclusion earlier")
18492685e479fd   ("kconfig: use yylineno option instead of manual lineno increments")
59889300274569 ! (".gitignore: move *.lex.c *.tab.[ch] patterns to the top-level .gitignore")
9a8dfb394c0467 ! ("kbuild: clean up *.lex.c and *.tab.[ch] patterns from top-level Makefile")
833e622459432e ! ("genksyms: generate lexer and parser during build instead of shipping")
b23d1a241f4eb4 ! ("kbuild: add %.lex.c and %.tab.[ch] to 'targets' automatically")
17baab68d337a0   ("kconfig: extend output of 'listnewconfig'")
e9781b52d4e0e3 ! ("kbuild: add PYTHON2 and PYTHON3 variables")

The current Kconfig update generates below build-time warnings:
  YACC    scripts/dtc/dtc-parser.tab.h
scripts/dtc/dtc-parser.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr]
  YACC    scripts/dtc/dtc-parser.tab.c
scripts/dtc/dtc-parser.y: warning: 3 shift/reduce conflicts [-Wconflicts-sr]

This seems to happen because the Kbuild updates apparently didn't make
room for both "*shipped"-based builds and flex/bison-based builds. A
similar problem has been reported for genksyms parser in v4.17-rc1
commit 833e622459432e ("genksyms: generate lexer and parser during build
instead of shipping"). I have figured out empirically that the warnings
are healed after updating the in-tree U-boot DTC to upstream v1.4.6-9,
same as done by Linux v4.17-rc1 commit 9130ba88464032 ("scripts/dtc:
Update to upstream version v1.4.6-9-gaadd0b65c987"). Whether fixing the
DTC-related yacc warnings should be done together with the Kconfig
re-sync, I would like to hear from community.

My testing was limited to:
- make defconfig all
- make ARCH=arm CROSS_COMPILE=aarch64-linux-gnu- r8a7795_ulcb_defconfig all
- comparing .config before and after the re-sync
- running the newly imported Kconfig unit tests as seen below:

$ make testconfig
Tested-by: Petr Vorel <petr.vorel@gmail.com>
============================= test session starts =============================
scripts/kconfig/tests/auto_submenu/__init__.py::test PASSED             [  7%]
scripts/kconfig/tests/choice/__init__.py::test_oldask0 PASSED           [ 14%]
scripts/kconfig/tests/choice/__init__.py::test_oldask1 PASSED           [ 21%]
scripts/kconfig/tests/choice/__init__.py::test_allyes PASSED            [ 28%]
scripts/kconfig/tests/choice/__init__.py::test_allmod PASSED            [ 35%]
scripts/kconfig/tests/choice/__init__.py::test_allno PASSED             [ 42%]
scripts/kconfig/tests/choice/__init__.py::test_alldef PASSED            [ 50%]
scripts/kconfig/tests/choice_value_with_m_dep/__init__.py::test PASSED  [ 57%]
scripts/kconfig/tests/err_recursive_inc/__init__.py::test PASSED        [ 64%]
scripts/kconfig/tests/inter_choice/__init__.py::test PASSED             [ 71%]
scripts/kconfig/tests/new_choice_with_dep/__init__.py::test PASSED      [ 78%]
scripts/kconfig/tests/no_write_if_dep_unmet/__init__.py::test PASSED    [ 85%]
scripts/kconfig/tests/rand_nested_choice/__init__.py::test PASSED       [ 92%]
scripts/kconfig/tests/warn_recursive_dep/__init__.py::test PASSED       [100%]
========================== 14 passed in 0.34 seconds ==========================

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
6 years agoMerge branch 'master' of git://git.denx.de/u-boot-spi
Tom Rini [Wed, 30 May 2018 18:51:37 +0000 (14:51 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-spi

- Fix a conflict in drivers/spi/atcspi200_spi.c related to the riscv
  tree fixing a warning.

Signed-off-by: Tom Rini <trini@konsulko.com>
6 years agoMerge git://git.denx.de/u-boot-riscv
Tom Rini [Wed, 30 May 2018 12:43:04 +0000 (08:43 -0400)]
Merge git://git.denx.de/u-boot-riscv

6 years agotravis.yml: Support RISC-V 64-bit
Rick Chen [Wed, 30 May 2018 08:12:19 +0000 (16:12 +0800)]
travis.yml: Support RISC-V 64-bit

Fix riscv: ax25-ae350 build fail problem
https://travis-ci.org/trini/u-boot/jobs/385147373

...
Building current source for 1 boards (1 thread, 2 jobs per thread)
     riscv:  +   ax25-ae350
+arch/riscv/cpu/ax25/start.S: Assembler messages:
+arch/riscv/cpu/ax25/start.S:48: Error: unrecognized opcode `sd a2,0(t0)'
+arch/riscv/cpu/ax25/start.S:112: Error: unrecognized opcode `ld t5,0(t0)'
...

After apply the commit
configs: ax25-ae350: Set 64-bit as default configuration

Toolchain shall be also setuped with 64-bit in .travis.yml.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Reviewed-by: Chih-Mao Chen <cmchen@andestech.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoMerge git://git.denx.de/u-boot-marvell
Tom Rini [Tue, 29 May 2018 15:01:46 +0000 (11:01 -0400)]
Merge git://git.denx.de/u-boot-marvell

6 years agoMerge branch 'master' of git://git.denx.de/u-boot-ubi
Tom Rini [Tue, 29 May 2018 15:01:43 +0000 (11:01 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-ubi

6 years agomach-snapdragon: increase size of malloc pool
Ramon Fried [Mon, 28 May 2018 20:55:49 +0000 (23:55 +0300)]
mach-snapdragon: increase size of malloc pool

Pool size must be increased to support new additionals
drivers.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
6 years agodb820c: add dummy clock for uart node
Ramon Fried [Mon, 28 May 2018 21:30:45 +0000 (00:30 +0300)]
db820c: add dummy clock for uart node

The missing clock causes serial_msm driver probe to fail.
Added a dummy node so the probe succeeds, as the clock init
currently in db820c is empty.

Fixes: 11d59fe5374a ("serial: serial_msm: fail probe if settings clocks fails")

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
6 years agoImport Android's dt_table.h for DT image format
Alex Deymo [Mon, 28 May 2018 15:19:35 +0000 (17:19 +0200)]
Import Android's dt_table.h for DT image format

Android documentation defines the recommended image format for storing
DTB/DTBO files in a single dtbo.img image. This patch includes the
latest header file with the struct definitions for this format from
AOSP.

The header was adapted to U-Boot's coding style and the function
declarations were removed.

Signed-off-by: Alex Deymo <deymo@google.com>
[trini: Change SDPX tag location]
Signed-off-by: Tom Rini <trini@konsulko.com>
6 years agoconfigs: remove CONFIG_SYS_MVFS
Chris Packham [Sat, 26 May 2018 10:32:29 +0000 (22:32 +1200)]
configs: remove CONFIG_SYS_MVFS

This was being used by some Marvell boards to enable some file system
related features (many of which have already been moved to Kconfig).
Make the future migration of the final 2 or 3 config options easier by
expanding #define CONFIG_SYS_MVFS into the options that it enables and
remove CONFIG_SYS_MVFS.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agomtd: ftsmc020: Drop unsed code
Rick Chen [Tue, 29 May 2018 03:10:56 +0000 (11:10 +0800)]
mtd: ftsmc020: Drop unsed code

ftsmc020_init is not used anymore.
So it can be removed.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoboard: ax25-ae350: Support cfi flash
Rick Chen [Tue, 29 May 2018 03:07:53 +0000 (11:07 +0800)]
board: ax25-ae350: Support cfi flash

Add smc_init() to get register base from dts and
deal with atfsmc020 controler initialzation job.

Write protect is enabled by default. So WP shall
be disabled when startup, then cfi flash can be
detected and erasing and writing can be executed.

Adp-ae3xx and adp-ag101p both do smc initilize job
in lowlevel_init.S and get register base fron
CONFIG_FTSMC020_BASE. They also can be moved those
codes to board stage. Remind them as todo jobs.
After that CONFIG_FTSMC020_BASE can be removed.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoriscv: dts: Support cfi flash
Rick Chen [Tue, 29 May 2018 03:05:54 +0000 (11:05 +0800)]
riscv: dts: Support cfi flash

Add nor node for cfi-flash driver and smc node
for smc(aftsmc020) controller.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoconfigs: ax25-ae350: Support cfi flash
Rick Chen [Tue, 29 May 2018 03:04:23 +0000 (11:04 +0800)]
configs: ax25-ae350: Support cfi flash

Enable cfi flash driver and setup flash
parameters to support parallel nor flash
which type is JS28F00A-M29EWH.

Verification:
Size detection, data read, erase and write are all ok.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agommc: ftsdc010_mci: Sync compatible with DT mmc node
Rick Chen [Tue, 29 May 2018 03:00:28 +0000 (11:00 +0800)]
mmc: ftsdc010_mci: Sync compatible with DT mmc node

The compatible string of ftsdc010_mci.c is different from
the mmc driver in Linux Kernel. Modify it for consistency.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoriscv: dts: Sync DT with Linux Kernel
Rick Chen [Tue, 29 May 2018 02:53:41 +0000 (10:53 +0800)]
riscv: dts: Sync DT with Linux Kernel

Use same dts to boot U-Boot and RISC-V
Linux Kernel v4.16-rc2 in ax25-ae350 platform.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agonet: ftmac100: Fix compiler warning
Rick Chen [Tue, 29 May 2018 02:42:19 +0000 (10:42 +0800)]
net: ftmac100: Fix compiler warning

Fix warnings as below when compile in 64-bit.

warning: cast from pointer to integer
of different size [-Wpointer-to-int-cast]

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agospi: atcspi200: Fix compiler warning
Rick Chen [Tue, 29 May 2018 02:40:03 +0000 (10:40 +0800)]
spi: atcspi200: Fix compiler warning

Fix warning as below when compile in 64-bit.

warning: format '%u' expects argument of type
'unsigned int', but argument 6 has type 'size_t
{aka long unsigned int}

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoconfigs: ax25-ae350: Set 64-bit as default configuration
Rick Chen [Tue, 29 May 2018 02:38:16 +0000 (10:38 +0800)]
configs: ax25-ae350: Set 64-bit as default configuration

Set 64-bit as default configuration for ax25-ae350.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agodoc: ae250: Rename as ae350
Rick Chen [Tue, 29 May 2018 02:29:20 +0000 (10:29 +0800)]
doc: ae250: Rename as ae350

Rename
 nx25 as ax25
 ae250 as ae350
 nx25-ae250 as ax25-ae350
 including filename, variable, string and definition.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoconfigs: nx25-ae250:Rename as ax25-ae350
Rick Chen [Tue, 29 May 2018 02:20:39 +0000 (10:20 +0800)]
configs: nx25-ae250:Rename as ax25-ae350

Rename
 nx25 as ax25
 ae250 as ae350
 nx25-ae250 as ax25-ae350
 including filename, variable, string and definition.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoboard: nx25-ae250: Rename as ax25-ae350
Rick Chen [Tue, 29 May 2018 02:06:42 +0000 (10:06 +0800)]
board: nx25-ae250: Rename as ax25-ae350

Rename
 nx25 as ax25
 ae250 as ae350
 nx25-ae250 as ax25-ae350
 including filename, variable, string and definition.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoriscv: cpu: nx25: Rename as ax25
Rick Chen [Tue, 29 May 2018 01:54:40 +0000 (09:54 +0800)]
riscv: cpu: nx25: Rename as ax25

Andes has rearranged the product combinations.
nx25 and ax25 both are RISC-V architecture cpu core.
But ax25 has MMU unit inside, and nx25 is not.

Cpu nx25 and platform ae250 are arranged in pairs.
Cpu ax25 and platform ae350 are arranged in pairs.

This patch will rename
nx25 as ax25
ae250 as ae350
nx25-ae250 as ax25-ae350
including filename, variable, string and definition.

Then u-boot can boot linux kernel in ae350
platform reasonably.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoSPDX: Convert single license tags to Linux Kernel style
Rick Chen [Tue, 29 May 2018 06:10:06 +0000 (14:10 +0800)]
SPDX: Convert single license tags to Linux Kernel style

Fix license tags problem after apply patchs about
riscv: Enable efi_loader support.

Signed-off-by: Rick Chen <rick@andestech.com>
Signed-off-by: Rick Chen <rickchen36@gmail.com>
Cc: Greentime Hu <green.hu@gmail.com>
6 years agoefi_loader: Enable RISC-V support
Rick Chen [Mon, 28 May 2018 11:06:37 +0000 (19:06 +0800)]
efi_loader: Enable RISC-V support

We have almost all pieces needed to support RISC-V UEFI binaries in place already.
The only missing piece are ELF relocations for runtime code and
data.

This patch adds respective support in the linker script and the runtime
relocation code. It also allows users to enable the EFI_LOADER configuration
switch on RISC-V platforms.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoriscv: nx25: Enable distro boot
Alexander Graf [Mon, 23 Apr 2018 05:59:49 +0000 (07:59 +0200)]
riscv: nx25: Enable distro boot

Distro boot allows for a common boot path on systems that allow distributions
to easily boot from a default configuration.

This patch enables distro boot for the nx25-ae250. Hopefully this can serve
as a good example for new boards, so they enable it as well.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agodistro: Extend with RISC-V defines
Alexander Graf [Mon, 23 Apr 2018 05:59:48 +0000 (07:59 +0200)]
distro: Extend with RISC-V defines

While we don't have UEFI naming conventions for RISC-V file paths yet,
we need to search for something. So let's copy the removable file paths
from the RISC-V edk2 port.

Also add the official VCI strings that contain the standardized RISC-V
architecture ID fields.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: Use EFI_CACHELINE_SIZE in the image loader too
Alexander Graf [Mon, 23 Apr 2018 05:59:47 +0000 (07:59 +0200)]
efi_loader: Use EFI_CACHELINE_SIZE in the image loader too

We were using our EFI_CACHELINE_SIZE define only in the runtime service
code, but left the image loader to use plain CONFIG_SYS_CACHELINE_SIZE.

This patch moves EFI_CACHELINE_SIZE into efi_loader.h and converts
the image loader to use it.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoriscv: Add board_quiesce_devices stub
Alexander Graf [Mon, 23 Apr 2018 05:59:46 +0000 (07:59 +0200)]
riscv: Add board_quiesce_devices stub

This patch adds an empty stub for board_quiesce_devices() which allows boards
to quiesce their devices before we boot into an OS in a platform agnostic way.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoriscv: Add EFI application infrastructure
Alexander Graf [Mon, 23 Apr 2018 05:59:45 +0000 (07:59 +0200)]
riscv: Add EFI application infrastructure

The hello world binary and a few selftests require to build EFI target
binaries, not just the EFI host environment.

This patch adds all required files to generate an EFI binary for
RISC-V.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoriscv: Enable function sections
Alexander Graf [Mon, 23 Apr 2018 05:59:44 +0000 (07:59 +0200)]
riscv: Enable function sections

The linker can remove sections that are never addressed, so it makes a lot
of sense to declare every function as an individual section.

This reduces the output U-Boot code size by ~30kb for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoriscv: Add setjmp/longjmp code
Alexander Graf [Mon, 23 Apr 2018 05:59:43 +0000 (07:59 +0200)]
riscv: Add setjmp/longjmp code

To support efi_loader we need to have platform support for setjmp/longjmp.
Add it here.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoconfigs: remove redundant comment sections
Chris Packham [Sat, 26 May 2018 10:32:28 +0000 (22:32 +1200)]
configs: remove redundant comment sections

mv-common.h and mv-plug-common.h still had comments delimiting sections
of configuration options that have all been moved to Kconfig by previous
treewide efforts. Remove the redundant comment sections.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoconfigs: remove empty #ifdef block from mv-common.h
Chris Packham [Sat, 26 May 2018 09:43:56 +0000 (21:43 +1200)]
configs: remove empty #ifdef block from mv-common.h

The last option guarded by this ifdef was removed in commit 68d534201733
("sf: Move SPI flash drivers to defconfig"). Remove the now empty
ifdef/endif block and the associated comment.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoarm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU
Ken Ma [Fri, 25 May 2018 07:49:27 +0000 (15:49 +0800)]
arm64: mvebu: defconfig: enable CONFIG_AHCI_MVEBU

This patch enables the new ahci mvebu driver for marvell arm64 platform
SOCs(A3k and A8k). And since AHCI_MVEBU selects SCSI_AHCI, so
"CONFIG_SCSI_AHCI=y" is removed from those default config files.

Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoata: ahci_mvebu: add scsi support
Ken Ma [Fri, 25 May 2018 07:49:26 +0000 (15:49 +0800)]
ata: ahci_mvebu: add scsi support

Mvebu AHCI is AHCI driver which uses SCSI under the hood.
This patch adjusts AHCI setup to support SCSI by creating
a SCSI device as a child. Since the functions of creating
SCSI device need the kconfig option DM_SCSI, so let
AHCI_MVEBU select DM_SCSI.

Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds
David Sniatkiwicz [Fri, 25 May 2018 07:49:25 +0000 (15:49 +0800)]
ata: ahci_mvebu: a8040 a0: remove bad port register offsets workarounds

This workaround was added for A8040/7040 A0.
A8040/7040 A0 is no longer supported so this workaround
can be removed.

Signed-off-by: David Sniatkiwicz <davidsn@marvell.com>
Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoata: mvebu: move mvebu sata driver to drivers/ata directory
Ken Ma [Fri, 25 May 2018 07:49:24 +0000 (15:49 +0800)]
ata: mvebu: move mvebu sata driver to drivers/ata directory

Currently mvebu sata driver is in arch/arm/mach_mvebu directory, this
patch moves it to drivers/ata directory with renaming "sata.c" to
"ahci_mvebu.c" which is aligned to Linux.
New ahci driver's kconfig option is added as AHCI_MVEBU which selects
SCSI_AHCI and is based on AHCI.

Signed-off-by: Ken Ma <make@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agodts: mvebu: a80x0: Enable SD/eMMC interfaces
Konstantin Porotchkin [Fri, 25 May 2018 06:20:53 +0000 (14:20 +0800)]
dts: mvebu: a80x0: Enable SD/eMMC interfaces

Enable SDHCI interface on AP and CP0 in A80x0 DTS files

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agomvebu: pinctrl: Add SD/eMMC PHY selector to the driver
Konstantin Porotchkin [Fri, 25 May 2018 06:20:52 +0000 (14:20 +0800)]
mvebu: pinctrl: Add SD/eMMC PHY selector to the driver

When the pin control driver selects SD/eMMC function for
a pin group, there is additional configuration to be done
for this case - switch the PHY to work with SDHCI interface.
This patch adds the missing functionality into the pin
control driver.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Evan Wang <xswang@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agomvebu: pinctrl: sync compatible string with Linux 4.17-rc4
Evan Wang [Fri, 25 May 2018 06:20:51 +0000 (14:20 +0800)]
mvebu: pinctrl: sync compatible string with Linux 4.17-rc4

For pinctrl driver of mvebu, the compatible strings
supported are defined differently from Linux version.
The patch aligned the compatible string with
Linux 4.17-rc4.

Signed-off-by: Evan Wang <xswang@marvell.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoARM: kirkwood: Add device-tree for keymile
Chris Packham [Thu, 17 May 2018 09:46:01 +0000 (21:46 +1200)]
ARM: kirkwood: Add device-tree for keymile

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoARM: kirkwood: Add device-tree for netspace & inetspace
Chris Packham [Thu, 17 May 2018 09:46:00 +0000 (21:46 +1200)]
ARM: kirkwood: Add device-tree for netspace & inetspace

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoARM: kirkwood: Add device-tree for lschlv2 & lsxhl
Chris Packham [Thu, 17 May 2018 09:45:59 +0000 (21:45 +1200)]
ARM: kirkwood: Add device-tree for lschlv2 & lsxhl

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoARM: kirkwood: Add device-tree for ds109
Chris Packham [Thu, 17 May 2018 09:45:58 +0000 (21:45 +1200)]
ARM: kirkwood: Add device-tree for ds109

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoARM: kirkwood: Add device-tree for dreamplug
Chris Packham [Thu, 17 May 2018 09:45:57 +0000 (21:45 +1200)]
ARM: kirkwood: Add device-tree for dreamplug

Import the dts file from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2
Chris Packham [Thu, 17 May 2018 09:45:56 +0000 (21:45 +1200)]
ARM: kirkwood: Add device-tree for d2net_v2 & net2big_v2

Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agoboard: turris_mox: Add fixed regulator support to defconfig
Marek Behún [Wed, 16 May 2018 20:13:49 +0000 (22:13 +0200)]
board: turris_mox: Add fixed regulator support to defconfig

Without this USB3 won't work in U-Boot.

Signed-off-by: Marek Behun <marek.behun@nic.cz>
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Stefan Roese <sr@denx.de>
6 years agosf: Add Macronix MX25U25635F ID
Marek Vasut [Thu, 17 May 2018 12:49:03 +0000 (14:49 +0200)]
sf: Add Macronix MX25U25635F ID

Add ID for the Macronix MX25U25635F flash.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
6 years agosf: Add Winbond W25Q256 ID
Marek Vasut [Wed, 16 May 2018 14:45:18 +0000 (16:45 +0200)]
sf: Add Winbond W25Q256 ID

Add ID for the Winbond W25Q256 flash.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Jagan Teki <jagan@openedev.com>
6 years agoadd FIT data-position & data-offset property support
Kelvin Cheung [Sat, 19 May 2018 10:21:37 +0000 (18:21 +0800)]
add FIT data-position & data-offset property support

Add FIT data-position & data-offset property support for bootm,
which were already supported in SPL.

Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
6 years agomalloc: Use malloc simple before malloc is fully initialized in memalign()
Ley Foon Tan [Fri, 18 May 2018 10:03:12 +0000 (18:03 +0800)]
malloc: Use malloc simple before malloc is fully initialized in memalign()

Follow implementation in mALLOc(). Check GD_FLG_FULL_MALLOC_INIT flag and use
malloc_simple if GD_FLG_FULL_MALLOC_INIT is unset. Adjust the malloc bytes
to align with the requested alignment.

The original memalign() function will access mchunkptr struct to adjust the
alignment if there is misalignment happen, but mchunkptr struct is not being
initialized before full malloc is initialized. This cause the system crash.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Reviewed-by: Marek Vasut <marek.vasut@gmail.com>
6 years agommc: stm32_sdmmc2: Fix stm32_sdmmc2_start_cmd()
Patrice Chotard [Thu, 17 May 2018 14:53:57 +0000 (16:53 +0200)]
mmc: stm32_sdmmc2: Fix stm32_sdmmc2_start_cmd()

SDMMC_CMD_CPSMEN bit is wrongly check and set in
SDMMC_ARG register instead of SDMMC_CMD register.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agostm32mp1: use OTP to configure MAC address and serial number
Patrick Delaunay [Thu, 17 May 2018 13:24:07 +0000 (15:24 +0200)]
stm32mp1: use OTP to configure MAC address and serial number

Use OTP57 and 58 for MAC address
- OTP57 = MAC address  bits [31:0]
- OTP58 = MAC address  bit  [47:32] stored in OTP  LSB's

Use manufacture information in OTP13 to OTP15 to build unique
chip id saved in env variable "serial#"
(used for USB device enumeration)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agostm32mp1: add FUSE command support
Patrick Delaunay [Thu, 17 May 2018 13:24:06 +0000 (15:24 +0200)]
stm32mp1: add FUSE command support

Add support of fuse command (read/write/program/sense)
on bank 0 to access to BSEC SAFMEM (4096 OTP bits).

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agostm32mp1: add bsec driver
Patrick Delaunay [Thu, 17 May 2018 13:24:05 +0000 (15:24 +0200)]
stm32mp1: add bsec driver

Add a MISC driver with read and write access to BSEC IP
(Boot and Security and OTP control)
- offset 0: shadowed values
- offset 0x80000000: OTP fuse box values (SAFMEM)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agostm32mp1: remove the second TAMP_BOOT_CONTEXT update
Patrick Delaunay [Thu, 17 May 2018 13:24:04 +0000 (15:24 +0200)]
stm32mp1: remove the second TAMP_BOOT_CONTEXT update

The register TAMP_BOOT_CONTEXT is already updated in
get_bootmode() in cpu.c and no need to be done
twice.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agostm32mp1: Allow to activate CONFIG_DEBUG_UART
Patrick Delaunay [Thu, 17 May 2018 12:50:46 +0000 (14:50 +0200)]
stm32mp1: Allow to activate CONFIG_DEBUG_UART

Add the needed information to enable the debug uart
to have printf before the serial driver probe
(so before probe for clock, pincontrol and reset drivers)

To enable the debug on uart 4 (default console):
+ CONFIG_DEBUG_UART=y
+ CONFIG_DEBUG_UART_STM32=y

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agoserial: stm32: Add setparity support
Patrick Delaunay [Thu, 17 May 2018 12:50:45 +0000 (14:50 +0200)]
serial: stm32: Add setparity support

Add possibility to update the serial parity used.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agodm: serial: Add setparity
Patrick Delaunay [Thu, 17 May 2018 12:50:44 +0000 (14:50 +0200)]
dm: serial: Add setparity

Implements serial setparity ops to allow uart parity change.
It allows to select ODD, EVEN or NONE parity.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
6 years agoserial: stm32: Fix bits defines name
Patrice Chotard [Thu, 17 May 2018 12:50:43 +0000 (14:50 +0200)]
serial: stm32: Fix bits defines name

Rename USART_ISR_FLAG_xxx bits to USART_ISR_xxx bits and
USART_ICR_OREF to USART_ICR_ORECF in order to match datasheets.
Sort defines by descendant order.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoserial: stm32: Add debug uart support
Patrick Delaunay [Thu, 17 May 2018 12:50:42 +0000 (14:50 +0200)]
serial: stm32: Add debug uart support

Add support for early debug printf, before the availability of
driver model and device tree support.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at booting
Radoslaw Pietrzyk [Wed, 16 May 2018 15:27:11 +0000 (17:27 +0200)]
ram: stm32_sdram: Adds stm32f429-disco fixes for HardFault at booting

- adds reading FMC swap setting from DTB to SDRAM driver
- sets FMC swap for stm32f429-disco board
- changes ram start address to 0x90000000

Signed-off-by: Radoslaw Pietrzyk <radoslaw.pietrzyk@gmail.com>
Acked-by: Patrice Chotard <patrice.chotard@st.com>
6 years agoserial: serial_msm: added pinmux & config
Ramon Fried [Wed, 16 May 2018 09:13:42 +0000 (12:13 +0300)]
serial: serial_msm: added pinmux & config

Serial port configuration was missing from previous implementation.
It only worked because it was preconfigured by LK.
This patch configures the uart for 115200 8N1.
It also configures the pin mux for uart pins using DT bindings.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
6 years agodb410: added pinctrl node and serial bindings
Ramon Fried [Wed, 16 May 2018 09:13:41 +0000 (12:13 +0300)]
db410: added pinctrl node and serial bindings

Added TLMM pinctrl node for pin muxing & config.
Additionally, added a serial node for uart.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
6 years agomach-snapdragon: Introduce pinctrl driver
Ramon Fried [Wed, 16 May 2018 09:13:40 +0000 (12:13 +0300)]
mach-snapdragon: Introduce pinctrl driver

This patch adds pinmux and pinctrl driver for TLMM
subsystem in snapdragon chipsets.
Currently, supporting only 8016, but implementation is
generic and 8096 can be added easily.

Driver is using the generic dt-bindings and doesn't
introduce any new bindings (yet).

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agomach-snapdragon: Fix UART clock flow
Ramon Fried [Wed, 16 May 2018 09:13:39 +0000 (12:13 +0300)]
mach-snapdragon: Fix UART clock flow

UART clock enabling flow was wrong.
Changed the flow according to downstream implementation in LK.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
6 years agoserial: serial_msm: initialize uart only before relocation
Ramon Fried [Wed, 16 May 2018 09:13:38 +0000 (12:13 +0300)]
serial: serial_msm: initialize uart only before relocation

The uart is already initialized prior to relocation,
reinitialization after relocation is unnecessary.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoserial: serial_msm: fail probe if settings clocks fails
Ramon Fried [Wed, 16 May 2018 09:13:37 +0000 (12:13 +0300)]
serial: serial_msm: fail probe if settings clocks fails

Failure to set the clocks will causes data abort exception when
trying to write to AHB uart registers.
This patch ensures that we don't touch these registers if clock
setting failed.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agodb820c: set clk node to be probed before relocation
Ramon Fried [Wed, 16 May 2018 09:13:36 +0000 (12:13 +0300)]
db820c: set clk node to be probed before relocation

The clock and serial nodes are needed before relocation.
This patch ensures that the msm-serial driver will probe
and provide uart output before relocation.

Signed-off-by: Ramon Fried <ramon.fried@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoRemove CONFIG_MVGBE from config_whitelist.txt
Chris Packham [Wed, 16 May 2018 08:34:14 +0000 (20:34 +1200)]
Remove CONFIG_MVGBE from config_whitelist.txt

Now that there are more boards defining this it can be removed from the
whitelist.

Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoPCI: Document pciauto_region_allocate()
Tuomas Tynkkynen [Mon, 14 May 2018 20:50:05 +0000 (23:50 +0300)]
PCI: Document pciauto_region_allocate()

Add a doc comment for pciauto_region_allocate().

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoPCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resources
Tuomas Tynkkynen [Mon, 14 May 2018 16:38:13 +0000 (19:38 +0300)]
PCI: autoconfig: Don't allocate 64-bit addresses to 32-bit only resources

Currently, if we happen to allocate an address requiring 64 bits to a
device only supporting 32-bit BARs, the address eventually gets silently
truncated to 32 bits. Avoid this by adding a new flag to
pciauto_region_allocate() to bail out in such situations.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoPCI: Add newlines to debug prints in pci_auto_common.c
Tuomas Tynkkynen [Mon, 14 May 2018 16:38:12 +0000 (19:38 +0300)]
PCI: Add newlines to debug prints in pci_auto_common.c

All of the debug output from this file is squished to one line. Fix
it.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agodoc: qemu-arm: Drop highmem=off references
Tuomas Tynkkynen [Mon, 14 May 2018 15:47:52 +0000 (18:47 +0300)]
doc: qemu-arm: Drop highmem=off references

Now that U-Boot works fine with highmem enabled, there is no need to
tell users to disable highmem.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoARM: qemu-arm: Bump RAM size in AArch64 MMU table
Tuomas Tynkkynen [Mon, 14 May 2018 15:47:51 +0000 (18:47 +0300)]
ARM: qemu-arm: Bump RAM size in AArch64 MMU table

Now that PCI devices work with highmem-enabled QEMU emulation, bump up
the RAM size in the MMU tables to gain access to the full 255 GB of RAM
potential instead of the puny 3 GB.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoPCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set
Tuomas Tynkkynen [Mon, 14 May 2018 15:47:50 +0000 (18:47 +0300)]
PCI: dm: Ignore 64-bit memory regions if CONFIG_SYS_PCI_64BIT not set

Currently, qemu_arm_defconfig and qemu_arm64_defconfig only work with
the 'highmem=off' parameter passed to QEMU's virt machine. The reason is
that when 'highmem' is not disabled, QEMU appends 64-bit a memory
resource to the PCI controller's regions property in DT in addition to
the 32-bit PCI memory window in low memory. And the current DT parsing
code picks the last (thus the 64-bit one) memory resource, whose address
eventually gets silently truncated to 32 bits because
CONFIG_SYS_PCI_64BIT is not set, which obviously causes PCI to break.

Avoid this problem by ignoring memory regions whose addresses are above
the 32-bit boundary when CONFIG_SYS_PCI_64BIT is not set.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agoconfigs: add TPMv2.x support in Sandbox
Miquel Raynal [Tue, 15 May 2018 09:57:28 +0000 (11:57 +0200)]
configs: add TPMv2.x support in Sandbox

Enable the Sandbox TPMv2 driver in all possible configurations.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agosandbox: dts: add Sandbox TPMv2.x node
Miquel Raynal [Tue, 15 May 2018 09:57:27 +0000 (11:57 +0200)]
sandbox: dts: add Sandbox TPMv2.x node

This node declares the presence of the Sandbox TPMv2.x emulated chip,
available for testing.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agodoc: device-tree-bindings: add Sandbox TPMv2.0 module info
Miquel Raynal [Tue, 15 May 2018 09:57:26 +0000 (11:57 +0200)]
doc: device-tree-bindings: add Sandbox TPMv2.0 module info

Add Sandbox TPMv2.0 module bindings.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add a Sandbox TPMv2.x driver
Miquel Raynal [Tue, 15 May 2018 09:57:25 +0000 (11:57 +0200)]
tpm: add a Sandbox TPMv2.x driver

This driver can emulate all the basic functionalities of a TPMv2.x
chip and should behave like them during regular testing.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotest/py: add TPMv2.x test suite
Miquel Raynal [Tue, 15 May 2018 09:57:24 +0000 (11:57 +0200)]
test/py: add TPMv2.x test suite

Add tests for the TPMv2.x commands.
These commands may run both on a physical TPM and with the sandbox
driver.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agodoc: device-tree-bindings: add TIS TPMv2.0 SPI module info
Miquel Raynal [Tue, 15 May 2018 09:57:23 +0000 (11:57 +0200)]
doc: device-tree-bindings: add TIS TPMv2.0 SPI module info

Add TIS TPMv2.0 SPI module bindings.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm2: tis_spi: add the possibility to reset the chip with a gpio
Miquel Raynal [Wed, 16 May 2018 06:59:16 +0000 (08:59 +0200)]
tpm2: tis_spi: add the possibility to reset the chip with a gpio

On some designs, the reset line could not be connected to the SoC reset
line, in this case, request the GPIO and ensure the chip gets reset.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agotpm: add support for TPMv2.x SPI modules
Miquel Raynal [Tue, 15 May 2018 09:57:21 +0000 (11:57 +0200)]
tpm: add support for TPMv2.x SPI modules

Add the tpm2_tis_spi driver that should support any TPMv2 compliant
(SPI) module.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agotpm: add PCR authentication commands support
Miquel Raynal [Tue, 15 May 2018 09:57:20 +0000 (11:57 +0200)]
tpm: add PCR authentication commands support

Add support for the TPM2_PCR_SetAuthPolicy and
TPM2_PCR_SetAuthValue commands.

Change the command file and the help accordingly.

Note: These commands could not be tested because the TPMs available
do not support them, however they could be useful for someone else.
The user is warned by the command help.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add TPM2_HierarchyChangeAuth command support
Miquel Raynal [Tue, 15 May 2018 09:57:19 +0000 (11:57 +0200)]
tpm: add TPM2_HierarchyChangeAuth command support

Add support for the TPM2_HierarchyChangeAuth command.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add dictionary attack mitigation commands support
Miquel Raynal [Tue, 15 May 2018 09:57:18 +0000 (11:57 +0200)]
tpm: add dictionary attack mitigation commands support

Add support for the TPM2_DictionaryAttackParameters and
TPM2_DictionaryAttackLockReset commands.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add TPM2_GetCapability command support
Miquel Raynal [Tue, 15 May 2018 09:57:17 +0000 (11:57 +0200)]
tpm: add TPM2_GetCapability command support

Add support for the TPM2_GetCapability command.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add TPM2_PCR_Read command support
Miquel Raynal [Tue, 15 May 2018 09:57:16 +0000 (11:57 +0200)]
tpm: add TPM2_PCR_Read command support

Add support for the TPM2_PCR_Read command.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add TPM2_PCR_Extend command support
Miquel Raynal [Tue, 15 May 2018 09:57:15 +0000 (11:57 +0200)]
tpm: add TPM2_PCR_Extend command support

Add support for the TPM2_PCR_Extend command.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add TPM2_Clear command support
Miquel Raynal [Tue, 15 May 2018 09:57:14 +0000 (11:57 +0200)]
tpm: add TPM2_Clear command support

Add support for the TPM2_Clear command.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add TPM2_SelfTest command support
Miquel Raynal [Tue, 15 May 2018 09:57:13 +0000 (11:57 +0200)]
tpm: add TPM2_SelfTest command support

Add support for the TPM2_Selftest command.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add TPM2_Startup command support
Miquel Raynal [Tue, 15 May 2018 09:57:12 +0000 (11:57 +0200)]
tpm: add TPM2_Startup command support

Add support for the TPM2_Startup command.

Change the command file and the help accordingly.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: report driver error code to upper layer
Miquel Raynal [Tue, 15 May 2018 09:57:11 +0000 (11:57 +0200)]
tpm: report driver error code to upper layer

Instead of returning a generic 'library' error, report back the actual
error code so it can be displayed to the user by the regular error path.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add possible traces to analyze buffers returned by the TPM
Miquel Raynal [Tue, 15 May 2018 09:57:10 +0000 (11:57 +0200)]
tpm: add possible traces to analyze buffers returned by the TPM

When debugging, it is welcome to get more information about what the TPM
returns. Add the possibility to print the packets received to show their
exact content.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add macros to enhance TPM commands readability
Miquel Raynal [Tue, 15 May 2018 09:57:09 +0000 (11:57 +0200)]
tpm: add macros to enhance TPM commands readability

TPM commands are much easier to read/write with these macros that will
transform words or integers into byte strings. This way, there is no
need to call pack_byte_string() while all variable length in a command
are known (and at must 4 bytes, which is a lot of them).

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: prepare support for TPMv2.x commands
Miquel Raynal [Tue, 15 May 2018 09:57:08 +0000 (11:57 +0200)]
tpm: prepare support for TPMv2.x commands

Choice between v1 and v2 compliant functions is done with the
configuration.

Create the various files that will receive TPMv2-only code on the same
scheme as for the TPMv1 code.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
6 years agotpm: add missing parameter in private data structure description
Miquel Raynal [Tue, 15 May 2018 09:57:07 +0000 (11:57 +0200)]
tpm: add missing parameter in private data structure description

Both parameters 'duration_ms' and 'retry_time_ms' of the tpm_chip_priv
structure are documented is the comment above the declaration but 'buf'
was forgotten. Add the missing description.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>