Felix Fietkau [Sun, 13 Jan 2013 15:57:05 +0000 (15:57 +0000)]
add ustream-ssl, an ustream abstraction library for SSL stream sockets
SVN-Revision: 35131
Felix Fietkau [Sun, 13 Jan 2013 15:37:58 +0000 (15:37 +0000)]
ar71xx: fix unaligned access in a few more places
SVN-Revision: 35130
Felix Fietkau [Sun, 13 Jan 2013 14:54:39 +0000 (14:54 +0000)]
ar71xx: improve unaligned access patches, add a net_hdr_word() macro which assumes 2-byte aligned access and generates better code than {get,put}_unaligned_cpu32
SVN-Revision: 35129
Felix Fietkau [Sun, 13 Jan 2013 14:31:27 +0000 (14:31 +0000)]
libubox: update to latest version, adds small blobmsg enhancements and license fixes - package is now ISC/BSD-3c
SVN-Revision: 35128
Felix Fietkau [Sun, 13 Jan 2013 13:06:09 +0000 (13:06 +0000)]
ar71xx: avoid __packed define in the unaligned access hack patch, make the ipv6 address struct also 2-byte-aligned/packed
SVN-Revision: 35127
Felix Fietkau [Sun, 13 Jan 2013 12:23:42 +0000 (12:23 +0000)]
kernel: add back the mips module relocation patch
SVN-Revision: 35126
Felix Fietkau [Sun, 13 Jan 2013 11:33:48 +0000 (11:33 +0000)]
ar71xx: add more cpu feature overrides, slightly reduces kernel size
SVN-Revision: 35125
Felix Fietkau [Sun, 13 Jan 2013 11:33:44 +0000 (11:33 +0000)]
ar71xx: extend the unaligned access hacks to a few more places that showed up in the new kernel
SVN-Revision: 35124
Felix Fietkau [Sun, 13 Jan 2013 11:33:39 +0000 (11:33 +0000)]
kernel: fix enabling coredump support on 3.7+
SVN-Revision: 35123
Hauke Mehrtens [Sat, 12 Jan 2013 15:00:01 +0000 (15:00 +0000)]
brcm47xx: BCMA - Update default IRQ assignment per upstream change
Update the default IRQ assignment for unrecognized devices per
the upstream change.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 35121
Felix Fietkau [Sat, 12 Jan 2013 13:21:08 +0000 (13:21 +0000)]
kernel: make kmod-ledtrig-usbdev depend on usb core support instead of selecting it
SVN-Revision: 35120
Gabor Juhos [Sat, 12 Jan 2013 12:29:55 +0000 (12:29 +0000)]
refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35119
Gabor Juhos [Sat, 12 Jan 2013 12:29:53 +0000 (12:29 +0000)]
malta: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35118
Gabor Juhos [Sat, 12 Jan 2013 12:29:52 +0000 (12:29 +0000)]
malta: build lzma and gzip compressed uImages
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35117
Gabor Juhos [Sat, 12 Jan 2013 12:25:42 +0000 (12:25 +0000)]
adm5120: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35116
Gabor Juhos [Sat, 12 Jan 2013 12:25:40 +0000 (12:25 +0000)]
adm5120: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35115
Gabor Juhos [Sat, 12 Jan 2013 12:25:38 +0000 (12:25 +0000)]
ar71xx: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35114
Gabor Juhos [Sat, 12 Jan 2013 12:25:36 +0000 (12:25 +0000)]
ar71xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35113
Gabor Juhos [Sat, 12 Jan 2013 12:25:34 +0000 (12:25 +0000)]
mpc83xx: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35112
Gabor Juhos [Sat, 12 Jan 2013 12:25:32 +0000 (12:25 +0000)]
mpc83xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35111
Gabor Juhos [Sat, 12 Jan 2013 12:25:30 +0000 (12:25 +0000)]
ramips: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35110
Gabor Juhos [Sat, 12 Jan 2013 12:25:28 +0000 (12:25 +0000)]
ramips: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35109
Gabor Juhos [Sat, 12 Jan 2013 12:25:26 +0000 (12:25 +0000)]
rb532: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35108
Gabor Juhos [Sat, 12 Jan 2013 12:25:24 +0000 (12:25 +0000)]
rb532: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35107
Gabor Juhos [Sat, 12 Jan 2013 12:25:21 +0000 (12:25 +0000)]
ppc44x: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35106
Gabor Juhos [Sat, 12 Jan 2013 12:25:20 +0000 (12:25 +0000)]
ppc44x: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35105
Gabor Juhos [Sat, 12 Jan 2013 12:25:18 +0000 (12:25 +0000)]
ppc40x: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35104
Gabor Juhos [Sat, 12 Jan 2013 12:25:16 +0000 (12:25 +0000)]
ppc40x: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35103
Gabor Juhos [Sat, 12 Jan 2013 12:25:14 +0000 (12:25 +0000)]
cns21xx: remove 3.6 support
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35102
Gabor Juhos [Sat, 12 Jan 2013 12:25:12 +0000 (12:25 +0000)]
cns21xx: switch to 3.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35101
Gabor Juhos [Sat, 12 Jan 2013 11:43:08 +0000 (11:43 +0000)]
kernel: update linux 3.7 to 3.7.2
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35100
Florian Fainelli [Fri, 11 Jan 2013 16:44:26 +0000 (16:44 +0000)]
image.mk: use XZ bcj architecture filter if available
xz supports using an architecture specific BCJ filter, use that one to
save us a couple kB while producing squashfs filesystems (mimics the
Linux kernel).
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35097
Felix Fietkau [Fri, 11 Jan 2013 13:24:20 +0000 (13:24 +0000)]
mac80211: fix enabling HT40-
SVN-Revision: 35096
Vasilis Tsiligiannis [Fri, 11 Jan 2013 13:20:51 +0000 (13:20 +0000)]
base-files: Don't pass '--set-worker /lib/hotplug2/worker_fork.so' to hotplug2 (#12781)
SVN-Revision: 35095
Felix Fietkau [Fri, 11 Jan 2013 11:49:11 +0000 (11:49 +0000)]
mac80211: add a fix for ht40 connections
SVN-Revision: 35094
Felix Fietkau [Thu, 10 Jan 2013 18:46:36 +0000 (18:46 +0000)]
ath9k: add updated tx gain tables, fixes stability issues on TL-WDR4300 and other devices
SVN-Revision: 35089
Florian Fainelli [Thu, 10 Jan 2013 17:20:29 +0000 (17:20 +0000)]
netfilter: xt_NOTRACK is incorporated in xt_CT as of 3.8-rc3
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35087
Florian Fainelli [Thu, 10 Jan 2013 17:20:25 +0000 (17:20 +0000)]
mvebu: update to 3.8-rc3
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35086
Hauke Mehrtens [Thu, 10 Jan 2013 14:22:19 +0000 (14:22 +0000)]
brcm47xx: update bgmac driver to the version in mainline kernel
SVN-Revision: 35083
Felix Fietkau [Thu, 10 Jan 2013 14:09:50 +0000 (14:09 +0000)]
ath9k: add some calibration fixes from wireless-testing
SVN-Revision: 35081
Hauke Mehrtens [Thu, 10 Jan 2013 14:05:18 +0000 (14:05 +0000)]
kernel: update bcma and ssb to master-2013-01-09 from wireless-testing
SVN-Revision: 35080
Imre Kaloz [Thu, 10 Jan 2013 13:25:12 +0000 (13:25 +0000)]
clean up PCI bus topology
This makes the PCI bus topology more standard for devices behind a bridge
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 35079
Imre Kaloz [Thu, 10 Jan 2013 13:23:33 +0000 (13:23 +0000)]
clean up PCI bus topology
This makes the PCI bus topology more standard for devices behind a bridge
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 35078
John Crispin [Thu, 10 Jan 2013 06:44:58 +0000 (06:44 +0000)]
fixes USB reset on ARV7518
SVN-Revision: 35077
Florian Fainelli [Wed, 9 Jan 2013 15:36:43 +0000 (15:36 +0000)]
toolchain: fix libpthread package for musl based toolchains (#12651)
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35069
Felix Fietkau [Wed, 9 Jan 2013 15:16:52 +0000 (15:16 +0000)]
ath9k: correct a logic error in the rx path fix
SVN-Revision: 35067
Felix Fietkau [Wed, 9 Jan 2013 12:56:25 +0000 (12:56 +0000)]
mac80211, ath9k: merge some pending fixes from linux-wireless@
SVN-Revision: 35066
Felix Fietkau [Wed, 9 Jan 2013 12:45:28 +0000 (12:45 +0000)]
mac80211: update to 2013-01-07, add several ath9k stability fixes
SVN-Revision: 35063
John Crispin [Wed, 9 Jan 2013 09:04:09 +0000 (09:04 +0000)]
fixes none-pci build
SVN-Revision: 35062
Florian Fainelli [Tue, 8 Jan 2013 22:20:30 +0000 (22:20 +0000)]
kernel: add kmod-mvsdio MMC host controller for Marvell targets
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35061
Florian Fainelli [Tue, 8 Jan 2013 22:20:25 +0000 (22:20 +0000)]
kernel: make kmod-of-i2c available for the mvebu target
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35060
Florian Fainelli [Tue, 8 Jan 2013 22:20:21 +0000 (22:20 +0000)]
kernel: adjust orion/kirkwood packages to also build for mvebu target
Armada XP/370 boards share these hardware blocks with Orion and Kirkwood
SoCs.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35059
Florian Fainelli [Tue, 8 Jan 2013 22:20:16 +0000 (22:20 +0000)]
mvebu: add inital support for Marvell Armada XP/370 SoCs
This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:
- Ethernet
- SDIO
- GPIOs
- SATA
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35058
Florian Fainelli [Tue, 8 Jan 2013 22:20:11 +0000 (22:20 +0000)]
add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35057
Florian Fainelli [Tue, 8 Jan 2013 22:20:06 +0000 (22:20 +0000)]
add support for 3.8 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35056
Florian Fainelli [Tue, 8 Jan 2013 22:19:31 +0000 (22:19 +0000)]
kernel: add support for 3.8-rc2
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35055
Florian Fainelli [Tue, 8 Jan 2013 22:18:23 +0000 (22:18 +0000)]
kernel: add more SCTP related configuration symbols
These symbols are used by 3.8+ kernels
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35054
Hauke Mehrtens [Mon, 7 Jan 2013 22:51:39 +0000 (22:51 +0000)]
brcm47xx: BGMAC Driver corrections
1) Fix what appears to be a logic error in bgmac_phy_advertise.
2) Fix bgmac_ioctl to use passed phy_id; needed for switch-robo
interface w/ the driver to work correctly. I still have the issue
with the interface always being HD when the speed/duplex is set
manually (e.g., echo "100FD" > /proc/switch/eth0/port/N/media).
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 35052
Felix Fietkau [Mon, 7 Jan 2013 21:12:33 +0000 (21:12 +0000)]
mac80211: apply network interface configuration for adhoc + wpa2
SVN-Revision: 35049
Florian Fainelli [Mon, 7 Jan 2013 18:19:31 +0000 (18:19 +0000)]
ncurses: fix typo on INSTALL_LIBSTDCPP configuration symbol
Thanks to kyak for spotting this
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35047
Florian Fainelli [Mon, 7 Jan 2013 18:16:40 +0000 (18:16 +0000)]
gcc: fix build for MIPS64 targets introduced by musl patch
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35046
Florian Fainelli [Mon, 7 Jan 2013 18:16:36 +0000 (18:16 +0000)]
update to 3.7
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35045
Florian Fainelli [Mon, 7 Jan 2013 18:16:33 +0000 (18:16 +0000)]
gcc-linaro-4.6: update to 2012.12
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35044
Florian Fainelli [Mon, 7 Jan 2013 18:16:29 +0000 (18:16 +0000)]
gcc-linaro-4.7: update to 2012.12
Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 35043
Mirko Vogt [Mon, 7 Jan 2013 17:11:15 +0000 (17:11 +0000)]
fix typo in Makefile
Thanks to Stefan Hellermann for pointing this out!
SVN-Revision: 35042
Felix Fietkau [Mon, 7 Jan 2013 15:25:03 +0000 (15:25 +0000)]
libubox: update to latest version, contains several uloop/ustream fixes
SVN-Revision: 35039
Gabor Juhos [Mon, 7 Jan 2013 14:30:37 +0000 (14:30 +0000)]
ar71xx: disable PHY_SWAP and PHY_ADDR_SWAP bits on TL-WR703N/MR3020/MR3040/MR11U boards
The PHY_SWAP and PHY_ADDR_SWAP bits are initialized
differently by different versions of the bootloader.
This leads to broken ethernet connection with OpenWrt
on some boards.
Turn both SWAP bits OFF on these boards to make it
consistent regardless of the bootloader used.
Based on a patch by Michel Stempin <michel.stempin@wanadoo.fr>.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35037
Gabor Juhos [Mon, 7 Jan 2013 14:14:41 +0000 (14:14 +0000)]
ar71xx: add missing Makefile entry to the 74HC153 GPIO patch
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 35035
Mirko Vogt [Mon, 7 Jan 2013 14:10:01 +0000 (14:10 +0000)]
This patch updates uboot-xburst from 2009.11 to 2012.10-rc2 - Ingenic SoC support went upstream
Summary:
* remove all files/* (since merged to upstream)
* patches on nand-spl, mmc and lcd driver
Thanks a lot to Xiangfu Liu!
Signed-off-by: Xiangfu Liu <xiangfu@sharism.cc>
SVN-Revision: 35034
Vasilis Tsiligiannis [Mon, 7 Jan 2013 12:01:11 +0000 (12:01 +0000)]
zram-swap: Install init script with 0755 mode
SVN-Revision: 35033
Jo-Philipp Wich [Mon, 7 Jan 2013 10:54:56 +0000 (10:54 +0000)]
kernel: fix kmod-ipsec load order (#12552)
SVN-Revision: 35032
Hauke Mehrtens [Sun, 6 Jan 2013 20:23:49 +0000 (20:23 +0000)]
zram-swap: make the zram init.d executable
SVN-Revision: 35028
Hauke Mehrtens [Sun, 6 Jan 2013 17:14:53 +0000 (17:14 +0000)]
compcache: remove package, use zram-swap instead
SVN-Revision: 35026
Hauke Mehrtens [Sun, 6 Jan 2013 16:21:29 +0000 (16:21 +0000)]
zram: add package to use compressed ram disk for swap
The busybox size is increased by 3.2KByte uncompressed on bcm47xx with
this commit.
This zram-swap automatically creates a zram device, a swap partition on
it and make the kernel swap pages to it.
Thank you Bastian Bittorf <bittorf@bluebottle.com> for idea and the
script.
SVN-Revision: 35025
Felix Fietkau [Sun, 6 Jan 2013 15:09:47 +0000 (15:09 +0000)]
orion: debloat the kernel some more
SVN-Revision: 35023
Felix Fietkau [Sun, 6 Jan 2013 15:09:43 +0000 (15:09 +0000)]
kernel: add a module for the isl1208 rtc
SVN-Revision: 35022
Felix Fietkau [Sun, 6 Jan 2013 15:09:39 +0000 (15:09 +0000)]
kernel: add missing config symbol
SVN-Revision: 35021
John Crispin [Sun, 6 Jan 2013 11:11:42 +0000 (11:11 +0000)]
adds support for Edimax BR-6524N
fixes #12754
Signed-off-by: <rq@akl.lt>
SVN-Revision: 35020
John Crispin [Sun, 6 Jan 2013 11:11:30 +0000 (11:11 +0000)]
adds support for Edimax BR-6524N
fixes #12754
Signed-off-by: <rq@akl.lt>
SVN-Revision: 35019
John Crispin [Sun, 6 Jan 2013 10:01:53 +0000 (10:01 +0000)]
missing underscore in 3.3 regmap patch
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 35018
Felix Fietkau [Sat, 5 Jan 2013 13:33:44 +0000 (13:33 +0000)]
kernel: port the regmap fix to 3.6 (#12749), refresh patches for other versions
SVN-Revision: 35016
John Crispin [Sat, 5 Jan 2013 00:20:05 +0000 (00:20 +0000)]
fix regmap debloat patch
SVN-Revision: 35015
Felix Fietkau [Fri, 4 Jan 2013 17:41:23 +0000 (17:41 +0000)]
mac80211: add dependency of PACKAGE_MAC80211_DEBUGFS
I wanted to use some statistics from /sys/kernel/debug/ieee80211,
so I enabled PACKAGE_MAC80211_DEBUGFS. But I could not use it,
because CONFIG_KERNEL_DEBUG_FS was not set and it's a little bit
hidden. After manually setting CONFIG_KERNEL_DEBUG_FS to y,
everything was fine. This patch automatically selects
CONFIG_KERNEL_DEBUG_FS if PACKAGE_MAC80211_DEBUGFS is set.
Additionally, the help text says "Say N unless you know you need this.",
but it's default y. This help text is copied verbatim from the
kernel's Kconfig and not true for us. So remove this part of the
help text
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 35014
Felix Fietkau [Fri, 4 Jan 2013 16:10:17 +0000 (16:10 +0000)]
uci: update to latest version, adds list delete, removes unused plugin support
SVN-Revision: 35013
Steven Barth [Fri, 4 Jan 2013 15:59:28 +0000 (15:59 +0000)]
firewall: Add ULA site border for IPv6 traffic This prevents private traffic from leaking out to the internet
SVN-Revision: 35012
Jonas Gorski [Fri, 4 Jan 2013 14:47:57 +0000 (14:47 +0000)]
bcm63xx: Add Huawei HG556a support
Add Huawei EchoLife HG556a support.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35011
Jonas Gorski [Fri, 4 Jan 2013 14:47:50 +0000 (14:47 +0000)]
bcm63xx: Fix caldata partition mtd patch
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.
Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
SVN-Revision: 35010
Jonas Gorski [Fri, 4 Jan 2013 14:47:43 +0000 (14:47 +0000)]
bcm63xx: remove 3.3 support
3.6 is tested enough to be considered stable.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 35009
Jo-Philipp Wich [Fri, 4 Jan 2013 14:08:08 +0000 (14:08 +0000)]
iwinfo: don't use the txpower value from debugfs for now, it does not match the values reported via wext
SVN-Revision: 35007
John Crispin [Fri, 4 Jan 2013 09:32:06 +0000 (09:32 +0000)]
don't depend on lua
Delete +lua from libiwinfo-lua.
Signed-off-by: Stefan Hellermann <stefan@the2masters.de>
SVN-Revision: 35005
Felix Fietkau [Thu, 3 Jan 2013 18:52:15 +0000 (18:52 +0000)]
kernel: add a config option for direct i/o support
SVN-Revision: 35001
Hauke Mehrtens [Thu, 3 Jan 2013 18:52:08 +0000 (18:52 +0000)]
mac80211: b43: add firmware for HT-PHY by default.
remove firmware for LP-Phy core rev 14, I have never seen such a device.
SVN-Revision: 35000
Felix Fietkau [Thu, 3 Jan 2013 18:39:50 +0000 (18:39 +0000)]
kernel: move regmap bloat out of the kernel image if it is only being used in modules
SVN-Revision: 34999
Felix Fietkau [Thu, 3 Jan 2013 18:04:04 +0000 (18:04 +0000)]
add kmod-fs-configfs to replace kernel bloat added by selecting kmod-mmc-over-gpio
SVN-Revision: 34998
Hauke Mehrtens [Thu, 3 Jan 2013 16:56:54 +0000 (16:56 +0000)]
brcm47xx: various fixes and code cleanups for irq code
This is based on a patch send by Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34997
Hauke Mehrtens [Thu, 3 Jan 2013 02:07:11 +0000 (02:07 +0000)]
broadcom-diag: add diag support for Linksys E1000 V1
This adds diag leds/buttons support for Linksys E1000 V1. It worked on
my router, however it may need some tweaking by people more familiar
with openwrt and c to make it fit for commiting.
Thank you hhm for this patch.
SVN-Revision: 34996
Hauke Mehrtens [Thu, 3 Jan 2013 02:05:22 +0000 (02:05 +0000)]
brcm47xx: add bgmac driver
This Ethernet driver is in early development stage and still has some problems.
This was working on my bcm4716 based device.
Thanks to Rafał Miłecki <zajec5@gmail.com> for writing this driver.
SVN-Revision: 34995
Hauke Mehrtens [Thu, 3 Jan 2013 02:00:25 +0000 (02:00 +0000)]
brcm47xx: build b44 as a module
SVN-Revision: 34994
Hauke Mehrtens [Thu, 3 Jan 2013 01:59:43 +0000 (01:59 +0000)]
brcm47xx: run ifup before starting the switch
In addition check_module is not needed, nobody checks the return value.
SVN-Revision: 34993
Hauke Mehrtens [Thu, 3 Jan 2013 01:58:01 +0000 (01:58 +0000)]
switch: ROBO Switch Gigabit MII Support
I wrote this patch some time ago because I had a need for one of the
Gigabit ports (Linksys E3000) to be forced to 100FD. This is based
on the robocfg sources included w/ the RT-N16 sources from ASUS.
Since work is progressing on a BGMAC driver that could be included in
OpenWRT, this may be useful to someone else.
In testing, forcing the speed to 10/100 or 1000 worked fine; however,
when trying to force full-duplex mode, the result was always
half-duplex. I was not able to isolate the source of the problem
(this patch, driver or H/W limitation). The only way I could get it
to work was to set the port to Auto, but then only advertise 100FD
(not included in this patch).
I have a modified version of the robocfg package as well, I'd have to
clean it up a little first (remove the full-duplex hack) before
submitting it if there is interest.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 34992
projects / oweals / openwrt.git / log