speed.c: simplify aggregation of ecdsa --multi results

CLA: trivial

Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1377)

speed.c: simplify aggregation of dsa --multi results

CLA: trivial

Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1377)

speed.c: simplify aggregation of rsa --multi results

CLA: trivial

Signed-off-by: Cristian Stoica <cristian.stoica@nxp.com>
Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1377)

Don't read uninitialised data for short session IDs.

While it's always safe to read |SSL_MAX_SSL_SESSION_ID_LENGTH| bytes
from an |SSL_SESSION|'s |session_id| array, the hash function would do
so with without considering if all those bytes had been written to.

This change checks |session_id_length| before possibly reading
uninitialised memory. Since the result of the hash function was already
attacker controlled, and since a lookup of a short session ID will
always fail, it doesn't appear that this is anything more than a clean
up.

In particular, |ssl_get_prev_session| uses a stack-allocated placeholder
|SSL_SESSION| as a lookup key, so the |session_id| array may be
uninitialised.

This was originally found with libFuzzer and MSan in
https://boringssl.googlesource.com/boringssl/+/e976e4349d693b4bbb97e1694f45be5a1b22c8c7,
then by Robert Swiecki with honggfuzz and MSan here. Thanks to both.

Reviewed-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2583)

bn/asm/x86_64*: add DWARF CFI directives.

Reviewed-by: Rich Salz <rsalz@openssl.org>

perlasm/x86_64-xlate.pl: recognize DWARF CFI directives.

CFI directives annotate instructions that are significant for stack
unwinding procedure. In addition to directives recognized by GNU
assembler this module implements three synthetic ones:

- .cfi_push annotates push instructions in prologue and translates to
  .cfi_adjust_cfa_offset (if needed) and .cfi_offset;
- .cfi_pop annotates pop instructions in epilogue and translates to
  .cfi_adjust_cfs_offset (if needed) and .cfi_restore;
- .cfi_cfa_expression encodes DW_CFA_def_cfa_expression and passes it
  to .cfi_escape as byte vector;

CFA expression syntax is made up mix of DWARF operator suffixes [subset
of] and references to registers with optional bias. Following example
describes offloaded original stack pointer at specific offset from
current stack pointer:

.cfi_cfa_expression %rsp+40,deref,+8

Final +8 has everything to do with the fact that CFA, Canonical Frame
Address, is reference to top of caller's stack, and on x86_64 call to
subroutine pushes 8-byte return address.

Triggered by request from Adam Langley.

Reviewed-by: Rich Salz <rsalz@openssl.org>

perlasm/x86_64-xlate.pl: remove obsolete .picmeup synthetic directive.

Reviewed-by: Rich Salz <rsalz@openssl.org>

perlasm/x86_64-xlate.pl: minor readability updates.

Reviewed-by: Rich Salz <rsalz@openssl.org>

bn/asm/rsaz-avx2.pl: refine Win64 SE handler.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a typo in the X509_get0_subject_key_id() documentation

Fixes a copy&paste error

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2568)

Add needed module in 25-test_sid.t

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2579)

SSL_get_shared_sigalgs: handle negative idx parameter

When idx is negative (as is the case with do_print_sigalgs in
apps/s_cb.c), AddressSanitizer complains about a buffer overflow (read).
Even if the pointer is not dereferenced, this is undefined behavior.

Change the user not to use "-1" as index since the function is
documented to return 0 on out-of-range values.

Tested with `openssl s_server` and `curl -k https://localhost:4433`.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2349)

Because our test sid file contains EC, don't try it when configured no-ec

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2564)

Fix crash in tls13_enc

If s->s3->tmp.new_cipher is NULL then a crash can occur. This can happen
if an alert gets sent after version negotiation (i.e. we have selected
TLSv1.3 and ended up in tls13_enc), but before a ciphersuite has been
selected.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2575)

Update documentation

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

update test

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Add remaining TLS1.3 ciphersuites

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Call EVP_CipherFinal in CCM mode for tests.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Make EVP_*Final work for CCM ciphers

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Use contants for Chacha/Poly, redo algorithm expressions.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Add CCM mode support for TLS 1.3

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Add constants to CCM and TLS.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Add NID_auth_any and NID_kx_any NIDs.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Add SSL_kANY and SSL_aANY

Add SSL_kANY and SSL_aANY contants for TLS 1.3 ciphersuites. Return
appropriate text strings when they are used.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2550)

Centralize documentation about config file location

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2569)

apps: Add support for writing a keylog file

The server and client demos (s_client and s_server) are extended with a
-keylogfile option. This is similar as setting the SSLKEYLOGFILE
environment variable for NSS and creates a keylog file which is suitable
for Wireshark.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2343)

Remove unused variable

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2566)

Fix a crash in EVP_CIPHER_CTX_cleanup due to cipher_data may be NULL
or EVP_CTRL_INIT/EVP_CTRL_COPY was not called or failed.
If that happens in EVP_CipherInit_ex/EVP_CIPHER_CTX_copy set cipher = NULL,
aes_gcm_cleanup should check that gctx != NULL before calling OPENSSL_cleanse.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2562)

Fix parsing of serial# in req

Reported by Jakub Wilk.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2556)

Doc fix

Reported by Alexander Köppe

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2557)

Rename 90-test_fuzz.t to 99-test_fuzz.t to ensure that it's executed last.

Idea is to keep it last for all eternity, so that if you find yourself
in time-pressed situation and deem that fuzz test can be temporarily
skipped, you can terminate the test suite with less hesitation about
following tests that you would have originally missed.

Reviewed-by: Rich Salz <rsalz@openssl.org>

x86_64 assembly pack: Win64 SEH face-lift.

- harmonize handlers with guidelines and themselves;
- fix some bugs in handlers;
- add missing handlers in chacha and ecp_nistz256 modules;

Reviewed-by: Rich Salz <rsalz@openssl.org>

perlasm/x86_64-xlate.pl: clarify SEH coding guidelines.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a crash with malformed user notice policy numbers

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2352)

Combined patch against master branch for the following issues:

Fixed a memory leak in ASN1_digest and ASN1_item_digest.
Reworked error handling in asn1_item_embed_new.
Fixed error handling in int_ctx_new and EVP_PKEY_CTX_dup.
Fixed a memory leak in CRYPTO_free_ex_data.
Reworked error handing in x509_name_ex_d2i, x509_name_encode and x509_name_canon.
Check for null pointer in tls_process_cert_verify.

Fixes #2103 #2104 #2105 #2109 #2111 #2115

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2342)

Fix "no-ec"

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2547)

Add NNTP support (RFC 4642) to s_client ("-starttls nntp")

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2310)

Grouped data declarations [skip ci]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1981)

Removed tab spaces.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1981)

Corrections according the review comments.

Updated indentations according project rules, renamed file-local define to the shorter version - USE_RWLOCK, fixed declaration after the if statement in CRYPTO_THREAD_lock_new().
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1981)

Compile fix on platforms with missing pthread_rwlock_t.

Fix compilation on platforms with missing pthread_rwlock_t implementation by replacing it with pthread_mutex_t. An example of such platform can be Android OS 2.0 - 2.1, API level 5 (Eclair), Android NDK platform - android-5 where pthread_rwlock_t is not implemented and is missing in pthread.h.

In case of missing pthread_rwlock_t implementation CRYPTO_RWLOCK will work as exclusive lock in write-only mode of pthread_rwlock_t lock.

The implementation based on pthread_mutex_t must be using PTHREAD_MUTEX_RECURSIVE mode to be compatible with recursive behavior of pthread_rwlock_rdlock.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1981)

crypto/x86_64cpuid.pl: detect if kernel preserves %zmm registers.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Initialise alg_k and alg_a

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2543)

Add missing MinProtocol/MaxProtocol

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Add TLS 1.3 certificate selection tests.

For TLS 1.3 we select certificates with signature algorithms extension
only. For ECDSA+SHA384 there is the additional restriction that the
curve must be P-384: since the test uses P-256 this should fail.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Don't filter TLS 1.3 ciphersuites by signing or key exchange algorithm

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Update cipher definition

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Remove special case for TLS 1.3.

We now set the server certificate in tls_choose_sigalg() so there is
no need for a special case for TLS 1.3 any more.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

For TLS 1.3 retrieve previously set certificate index

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

make errors

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Set signature algorithm when choosing cipher

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Add function tls_choose_sigalg().

New function tls_choose_sigalg(). This is a signature algorithm version
of ssl3_choose_cipher(): it picks and sets the appropriate signature
algorithm and certificate based on shared signature algorithms.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Cosmetic change

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2339)

Test logging TLSv1.3 secrets.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2287)

Add support for logging out TLSv1.3 secrets

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2287)

Add support for parameterized SipHash

The core SipHash supports either 8 or 16-byte output and a configurable
number of rounds.
The default behavior, as added to EVP, is to use 16-byte output and
2,4 rounds, which matches the behavior of most implementations.
There is an EVP_PKEY_CTRL that can control the output size.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2216)

remove test/.rnd on make clean

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2344)

Majority rules, use session_ctx vs initial_ctx

session_ctx and initial_ctx are aliases of each other, and with the
opaque data structures, there's no need to keep both around. Since
there were more references of session_ctx, replace all instances of
initial_ctx with session_ctx.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2334)

bn: fix occurance of negative zero in BN_rshift1()

Reviewed-by: Rich Salz <rsalz@openssl.org>

bn: fix occurances of negative zero

The BIGNUM behaviour is supposed to be "consistent" when going into and
out of APIs, where "consistent" means 'top' is set minimally and that
'neg' (negative) is not set if the BIGNUM is zero (which is iff 'top' is
zero, due to the previous point).

The BN_DEBUG testing (make test) caught the cases that this patch
corrects.

Note, bn_correct_top() could have been used instead, but that is intended
for where 'top' is expected to (sometimes) require adjustment after direct
word-array manipulation, and so is heavier-weight. Here, we are just
catching the negative-zero case, so we test and correct for that
explicitly, in-place.

Change-Id: Iddefbd3c28a13d935648932beebcc765d5b85ae7
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1672)

bn: catch negative zero as an error

Change-Id: I5ab72ad0aae9069b47d5b7b7b9e25bd1b7afa251
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1672)

bn: fix BN_DEBUG + BN_DEBUG_RAND support

Couple of updates to make this code work properly again;
* use OPENSSL_assert() instead of assert() (and #include <assert.h>)
* the circular-dependency-avoidance uses RAND_bytes() (not pseudo)

Change-Id: Iefb5a9dd73f71fd81c1268495c54a64378955354
Signed-off-by: Geoff Thorpe <geoff@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1672)

bntests.txt: add a couple of checks of possibly negative zero

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2335)

bntest: do not stop on first fautl encountered

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2335)

bntest: make sure file_rshift tests BN_rshift1 as well when appropriate

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2335)

bntest: make sure that equalBN takes note of negative zero

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2335)

Add -Wno-parentheses-equality to dev-warnings.

Also fix a block comment formatting glitch.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2327)

Tidy up Suite B logic

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Remove peer_md and use peer_sigalg instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Simplify sigalgs code.

Remove unnecessary lookup operations: use the indices and data in the
lookup table directly.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Add digest and key indices to table.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Don't check certificate type against ciphersuite for TLS 1.3

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Add TLS 1.3 signing curve check

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Only allow PSS signatures with RSA keys and TLS 1.3

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Store table entry to peer signature algorithm.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2324)

Free up the memory for the NewSessionTicket extensions

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2326)

Make sure we free and cleanse the pms value in all code paths

Otherwise we get a memory leak.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2326)

Update macros.

Use TLS_MAX_SIGALGCNT for the maximum number of entries in the
signature algorithms array.

Use TLS_MAX_SIGSTRING_LEN for the maxiumum length of each signature
component instead of a magic number.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

fix style issues

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Fix TLS 1.2 and no sigalgs.

For TLS 1.2 if we have no signature algorithms extension then lookup
using the complete table instead of (empty) shared signature algorithms
list so we pick up defaults.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Use PSS for simple test so TLS 1.3 handhake is successful.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Add tests for client and server signature type

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Add test support for TLS signature types.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Update documentation

Add details of the use of PSS for signature algorithms.

Document SSL_get_peer_signature_nid() and SSL_get_peer_signature_type_nid().

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

make update

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Replace TLS_SIGALGS with SIGALG_LOOKUP

Since every supported signature algorithm is now an entry in the
SIGALG_LOOKUP table we can replace shared signature algortihms with
pointers to constant table entries.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Support TLS 1.3 signature scheme names.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Extend TLS 1.3 signature table.

Add additional entries in the TLS 1.2 signature table to include
the name, sig and hash NID (if any) and required curve (if any).

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Use shared signature algorithm list to find type.

Lookup the signature type in the shared list: we can use this to
use PSS if the peer supports it for TLS 1.2.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Add SSL_get_peer_signature_type_nid() function.

Add function to retrieve signature type: in the case of RSA
keys the signature type can be EVP_PKEY_RSA or EVP_PKEY_RSA_PSS.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Store peer signature type.

Store peer signature type in s->s3->tmp.peer_sigtype and check it
to see if the peer used PSS.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

More complete PSS support.

Extend support for PSS key signatures by using the EVP_PKEY_RSA_PSS type
to distinguish them from PKCS1 signature types.

Allow setting of PSS signature algorithms using the string "PSS" or
"RSA-PSS".

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Use uint16_t for signature scheme.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

use RSA_PSS_SALTLEN_DIGEST constant

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2301)

Expand comment in tls_process_hello_req()

Following review feedback.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)

Add a TODO around validating the ticket age

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)

Various style fixes following review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)

Remove unneccessary comments

Now we're using an enum the values themselves are self explanatory

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)

Use for loop in WPACKET_fill_lengths instead of do...while

Based on review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)

Move the SSL3_CK_CIPHERSUITE_FLAG out of public header

The newly added SSL3_CK_CIPHERSUITE_FLAG shouldn't be in a public header
file

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2259)