OPENSSL_NO_xxx cleanup: RFC3779

Remove OPENSSL_NO_RFCF3779.

Also, makevms.com was ignored by some of the other cleanups, so
I caught it up.  Sorry I ignored you, poor little VMS...

Reviewed-by: Richard Levitte <levitte@openssl.org>

OPENSSL_NO_xxx cleanup: many removals

The following compile options (#ifdef's) are removed:
    OPENSSL_NO_BIO OPENSSL_NO_BUFFER OPENSSL_NO_CHAIN_VERIFY
    OPENSSL_NO_EVP OPENSSL_NO_FIPS_ERR OPENSSL_NO_HASH_COMP
    OPENSSL_NO_LHASH OPENSSL_NO_OBJECT OPENSSL_NO_SPEED OPENSSL_NO_STACK
    OPENSSL_NO_X509 OPENSSL_NO_X509_VERIFY

This diff is big because of updating the indents on preprocessor lines.

Reviewed-by: Richard Levitte <levitte@openssl.org>

OPENSSL_NO_xxx cleanup:  DEC-CBCM removed

A DES algorithm mode, known attacks, no EVP support.
Flushed.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Provide documentation for all SSL(_CTX)?_(get|set)(_default)?_read_ahead
functions.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove explicit setting of read_ahead for DTLS. It never makes sense not to
use read_ahead with DTLS because it doesn't work. Therefore read_ahead needs
to be the default.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Make DTLS always act as if read_ahead is set. The actual value of read_ahead
is ignored for DTLS.

RT#3657

Reviewed-by: Andy Polyakov <appro@openssl.org>

Configure: addendum to OPENSSL_NO_[RMD160|RIPEMD] harmonization.

Reviewed-by: Rich Salz <rsalz@openssl.org>

des/asm/des_enc.m4: strip #ifdef OPENSSL_SYS_ULTRASPARC as part of
pre-processor controls cleanup. It doesn't mean that it no longer
works on UltraSPARC, only that it doesn't utilize sparcv9-specific
features like branch prediction hints and load in little-endian byte
order anymore. This "costs" ~3% in EDE3 performance regression on
UltraSPARC.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove obsolete support for old code.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>

Make OPENSSL_config truly ignore errors.

Per discussion: should not exit. Should not print to stderr.
Errors are ignored.  Updated doc to reflect that, and the fact
that this function is to be avoided.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

undef cleanup: use memmove

Reviewed-by: Andy Polyakov <appro@openssl.org>

Remove unused eng_rsax and related asm file

Reviewed-by: Andy Polyakov <appro@openssl.org>

ifdef cleanup, part 4a: '#ifdef undef'

This removes all code surrounded by '#ifdef undef'
One case is left: memmove() replaced by open-coded for loop,
in crypto/stack/stack.c  That needs further review.

Also removed a couple of instances of /* dead code */ if I saw them
while doing the main removal.

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix segfault with empty fields as last in the config.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Replace exit() with error return.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Keep disclaiming 16-bit support.

If you examine changes, you are likely to wonder "but what about ILP64,
elusive as they are, don't they fall victim to 16-bit rationalization?"
No, the case was modeled and verified to work.

Reviewed-by: Rich Salz <rsalz@openssl.org>

ifdef cleanup part 3: OPENSSL_SYSNAME

Rename OPENSSL_SYSNAME_xxx to OPENSSL_SYS_xxx
Remove MS_STATIC; it's a relic from platforms <32 bits.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Add assembly support to ios64-cross.
Fix typos in ios64-cross config line.

Reviewed-by: Tim Hudson <tjh@openssl.org>

ifdef cleanup, 2 remove OPENSSL_NO_SETVBUF_IONBF

Use setbuf(fp, NULL) instead of setvbuf().  This removes some
ifdef complexity because all of our platforms support setbuf.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove obsolete uncomiled dsagen semi-test

Reviewed-by: Richard Levitte <levitte@openssl.org>

Cleanup old doc/*; remove CHANGES.SSLeay

Removed CHANGES.SSLeay

Udpate README to be current.

Updated fignerprints.txt to list only current release signers and
to explain that is what it's used for.

Removed the following:
c-indentation.el -- doesn't go with our coding style
openssl-shared.txt -- old info about shared library aides
openssl.txt -- old info about X509v3 extension support/syntax
ssleay.txt -- old info about OpenSSL's predecessor, back when
programmers coded on COBOL sheets by candlelight

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix post-reformat errors preventing windows compilation

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix formatting error in pem.h

Reviewed-by: Andy Polyakov <appro@openssl.org>

Use inner algorithm when printing certificate.

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Drop redundant and outdated __CYGWIN32__ tests.
Change OPENSSL_SYSNAME_CYGWIN32 to OPENSSL_SYSNAME_CYGWIN.
Drop outdated Cygwin targets.

RT#3605
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix macosx-ppc build (and typos in unwind info).

Reviewed-by: Tim Hudson <tjh@openssl.org>

sha256-armv4.pl: fix typo.

Reviewed-by: Tim Hudson <tjh@openssl.org>

More comment realignment

Reviewed-by: Tim Hudson <tjh@openssl.org>

Re-align some comments after running the reformat script.
This should be a one off operation (subsequent invokation of the
script should not move them)

Reviewed-by: Tim Hudson <tjh@openssl.org>

Rerun util/openssl-format-source -v -c .

Reviewed-by: Tim Hudson <tjh@openssl.org>

Run util/openssl-format-source -v -c .

Reviewed-by: Tim Hudson <tjh@openssl.org>

More tweaks for comments due indent issues

Conflicts:
ssl/ssl_ciph.c
ssl/ssl_locl.h

Conflicts:
ssl/s2_srvr.c
ssl/ssl.h

Reviewed-by: Tim Hudson <tjh@openssl.org>

Tweaks for comments due to indent's inability to handle them

Conflicts:
demos/tunala/tunala.h
engines/e_padlock.c
ssl/s2_clnt.c
ssl/s2_lib.c
ssl/s2_srvr.c
ssl/s3_srvr.c

Reviewed-by: Tim Hudson <tjh@openssl.org>

Move more comments that confuse indent

Reviewed-by: Tim Hudson <tjh@openssl.org>

Delete trailing whitespace from output.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add -d debug option to save preprocessed files.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Test option -nc

Add option -nc which sets COMMENTS=true but disables all indent comment
reformatting options.

Reviewed-by: Tim Hudson <tjh@openssl.org>

ec/ecp_nistz256.c: further harmonization with latest rules.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add ecp_nistz256.c to list of files skipped by openssl-format-source

Reviewed-by: Tim Hudson <tjh@openssl.org>

Manually reformat aes_x86core.c and add it to the list of files skipped by
openssl-format-source

Reviewed-by: Tim Hudson <tjh@openssl.org>

crypto/ofb128.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

modes/ctr128.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

modes/cfb128.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

ec/ecp_nistz256.c: harmonize with latest indent script.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix indent comment corruption issue

Reviewed-by: Tim Hudson <tjh@openssl.org>

Amend openssl-format-source so that it give more repeatable output

Reviewed-by: Tim Hudson <tjh@openssl.org>

bn/bn_const.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

bn/asm/x86_64-gcc.cL make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

bn/bn_asm.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

bn/bn_exp.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Manually reformat aes_core.c
Add aes_core.c to the list of files not processed by openssl-format-source

Reviewed-by: Tim Hudson <tjh@openssl.org>

Add obj_dat.h to the list of files that will not be processed by
openssl-format-source

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix strange formatting by indent

Reviewed-by: Tim Hudson <tjh@openssl.org>

modes/modes_lcl.h: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

indent has problems with comments that are on the right hand side of a line.
Sometimes it fails to format them very well, and sometimes it corrupts them!
This commit moves some particularly problematic ones.

Reviewed-by: Tim Hudson <tjh@openssl.org>

modes/gcm128.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

modes/cts128.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

crypto/mem_dbg.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

More indent fixes for STACK_OF

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix indent issue with functions using STACK_OF

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix indent issue with engine.h

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix logic to check for indent.pro

Reviewed-by: Tim Hudson <tjh@openssl.org>

crypto/cryptlib.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

bn/bntest.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

bn/bn_recp.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

engines/e_ubsec.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

apps/srp.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

apps/speed.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

bn/rsaz_exp.c: make it indent-friendly.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix make errors

Reviewed-by: Tim Hudson <tjh@openssl.org>

Make the script a little more location agnostic

Reviewed-by: Tim Hudson <tjh@openssl.org>

Provide script for filtering data initialisers for structs/unions. indent just can't handle it.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Script fixes.

Don't use double newline for headers.
Don't interpret ASN1_PCTX as start of an ASN.1 module.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Run expand before perl, to make sure things are properly aligned

Reviewed-by: Tim Hudson <tjh@openssl.org>

Force the use of our indent profile

Reviewed-by: Tim Hudson <tjh@openssl.org>

Provide source reformating script. Requires GNU indent to be
available.

Script written by Tim Hudson, with amendments by Steve Henson, Rich Salz and
Matt Caswell

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix source where indent will not be able to cope

Reviewed-by: Tim Hudson <tjh@openssl.org>

Yet more comments

Conflicts:
crypto/dsa/dsa_asn1.c
crypto/pem/pem_all.c
fips/dh/dh_gen.c
fips/dh/fips_dh_check.c
fips/dh/fips_dh_gen.c
ssl/ssl_ciph.c

Conflicts:
ssl/d1_clnt.c

Conflicts:
ssl/s2_pkt.c

Reviewed-by: Tim Hudson <tjh@openssl.org>

More comments

Conflicts:
crypto/dsa/dsa_vrf.c
crypto/ec/ec2_smpl.c
crypto/ec/ecp_smpl.c

Conflicts:
demos/bio/saccept.c
ssl/d1_clnt.c

Conflicts:
bugs/dggccbug.c
demos/tunala/cb.c

Reviewed-by: Tim Hudson <tjh@openssl.org>

Further comment changes for reformat (master)

Reviewed-by: Tim Hudson <tjh@openssl.org>

Cleanup OPENSSL_NO_xxx, part 1

OPENSSL_NO_RIPEMD160, OPENSSL_NO_RIPEMD merged into OPENSSL_NO_RMD160
OPENSSL_NO_FP_API merged into OPENSSL_NO_STDIO
Two typo's on #endif comments fixed:
OPENSSL_NO_ECB fixed to OPENSSL_NO_OCB
OPENSSL_NO_HW_SureWare fixed to OPENSSL_NO_HW_SUREWARE

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add Broadwell performance results.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Remove use of BN_init, BN_RECP_CTX_init from bntest

BN_init and BN_RECP_CTX_init are deprecated and are not exported
from shared libraries on some platforms (e.g. Windows) convert
bntest to use BN_new and BN_RECP_CTX_new instead.
Reviewed-by: Matt Caswell <matt@openssl.org>

For master windows build dsa.h is now needed.

Reviewed-by: Matt Caswell <matt@openssl.org>

Make output from openssl version -f consistent with previous versions

Reviewed-by: Andy Polyakov <appro@openssl.org>

Fix warning where BIO_FLAGS_UPLINK was being redefined.
This warning breaks the build in 1.0.0 and 0.9.8

Reviewed-by: Andy Polyakov <appro@openssl.org>

Avoid deprecation problems in Visual Studio 13

Reviewed-by: Andy Polyakov <appro@openssl.org>

Ensure internal header files are used from mk1mf based builds

Reviewed-by: Richard Levitte: <levitte@openssl.org>

RT3548: Remove unsupported platforms

This last one for this ticket.  Removes WIN16.
So long, MS_CALLBACK and MS_FAR.  We won't miss you.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Allow multiple IDN xn-- indicators

Update the X509v3 name parsing to allow multiple xn-- international
domain name indicators in a name.  Previously, only allowed one at
the beginning of a name, which was wrong.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

RT3548: Remove some unsupported platforms.

This commit removes NCR, Tandem, Cray.
Regenerates TABLE.
Removes another missing BEOS fluff.
The last platform remaining on this ticket is WIN16.

Reviewed-by: Richard Levitte <levitte@openssl.org>

RT478: Add uninstall make target

Add INSTALLDIRS variable, list of directories where things get
installed. Change install_html_docs to use perl mkdir-p script.

Add uninstall, uninstall_sw, uninstall_docs, uninstall_html_docs
to Makefile.org.  The actions of these targets were figured out
by "inverting" the install target.

Recurse into subdirs to do uninstall as needed.  Added uninstall
targets whose actions were similarly figured out by "inverting"
the install target.

Also remove some 'space before tab' complaints in Makefile.org

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix no-deprecated on Windows

Reviewed-by: Richard Levitte <levitte@openssl.org>

make update

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove redundant DSO_METHOD_beos declaration in dso.h. BEOS support has been
removed.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Make build reproducible

It contained a date on when it was build.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Further windows specific .gitignore entries

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Update .gitignore with windows files to be excluded from git

Reviewed-by: Tim Hudson <tjh@openssl.org>

Fix build failure on Windows due to undefined cflags identifier

Reviewed-by: Tim Hudson <tjh@openssl.org>

A memory leak can occur in dtls1_buffer_record if either of the calls to
ssl3_setup_buffers or pqueue_insert fail. The former will fail if there is a
malloc failure, whilst the latter will fail if attempting to add a duplicate
record to the queue. This should never happen because duplicate records should
be detected and dropped before any attempt to add them to the queue.
Unfortunately records that arrive that are for the next epoch are not being
recorded correctly, and therefore replays are not being detected.
Additionally, these "should not happen" failures that can occur in
dtls1_buffer_record are not being treated as fatal and therefore an attacker
could exploit this by sending repeated replay records for the next epoch,
eventually causing a DoS through memory exhaustion.

Thanks to Chris Mueller for reporting this issue and providing initial
analysis and a patch. Further analysis and the final patch was performed by
Matt Caswell from the OpenSSL development team.

CVE-2015-0206

Reviewed-by: Dr Stephen Henson <steve@openssl.org>