oweals/u-boot.git
9 years agoavr32: delete non generic board mimc200
Andreas Bießmann [Mon, 11 May 2015 11:07:26 +0000 (13:07 +0200)]
avr32: delete non generic board mimc200

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
9 years agoavr32: delete non generic board hammerhead
Andreas Bießmann [Mon, 11 May 2015 11:07:25 +0000 (13:07 +0200)]
avr32: delete non generic board hammerhead

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
9 years agoavr32: delete non generic board favr-32-ezkit
Andreas Bießmann [Mon, 11 May 2015 11:07:24 +0000 (13:07 +0200)]
avr32: delete non generic board favr-32-ezkit

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
9 years agoatngw100: convert to generic board
Andreas Bießmann [Sat, 23 May 2015 21:09:15 +0000 (23:09 +0200)]
atngw100: convert to generic board

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
9 years agoPrepare v2015.07-rc2 v2015.07-rc2
Tom Rini [Mon, 8 Jun 2015 21:48:33 +0000 (17:48 -0400)]
Prepare v2015.07-rc2

Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agopepper: Implement Board Detection mechanism
Adam YH Lee [Mon, 1 Jun 2015 21:29:09 +0000 (14:29 -0700)]
pepper: Implement Board Detection mechanism

AM335x-based 'Gumstix Pepper' SBCs and variants use different types of
RAM (DDR2 vs DDR3 with DDR3 being the default).  Detect the board type
by reading the factory-programmed EEPROM [1] and use this to select any
runtime boot options such as RAM type.

[1] http://elinux.org/BeagleBoardPinMux#List_of_Vendor_and_Device_IDs

Signed-off-by: Adam YH Lee <adam.yh.lee@gmail.com>
Signed-off-by: Ash Charles <ashcharles@gmail.com>
9 years agoautoboot.c: Add feature to stop autobooting via SHA256 encrypted password
Stefan Roese [Mon, 18 May 2015 12:08:24 +0000 (14:08 +0200)]
autoboot.c: Add feature to stop autobooting via SHA256 encrypted password

This patch adds the feature to only stop the autobooting, and therefor
boot into the U-Boot prompt, when the input string / password matches
a values that is encypted via a SHA256 hash and saved in the environment.

This feature is enabled by defined these config options:
     CONFIG_AUTOBOOT_KEYED
     CONFIG_AUTOBOOT_STOP_STR_SHA256

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
9 years agoautoboot.c: Move config options to Kconfig
Stefan Roese [Mon, 18 May 2015 12:08:23 +0000 (14:08 +0200)]
autoboot.c: Move config options to Kconfig

This patch moves the following config options to Kconfig:

CONFIG_AUTOBOOT_KEYED
CONFIG_AUTOBOOT_PROMPT
CONFIG_AUTOBOOT_DELAY_STR
CONFIG_AUTOBOOT_STOP_STR
AUTOBOOT_KEYED_CTRLC

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Drop ip04 and pm9263 configs/ additions, those boards previously
 set CONFIG_AUTOBOOT_PROMPT but never used it, re-run savedefconfig over
 all boards that did change. Make digsy_mtc_* string include seconds to
 match others and not warn. ]
Signed-off-by: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoautoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG_AUTOBOOT_DELAY_STR2
Stefan Roese [Mon, 18 May 2015 12:08:22 +0000 (14:08 +0200)]
autoboot.c: Remove CONFIG_AUTOBOOT_STOP_STR2 and CONFIG_AUTOBOOT_DELAY_STR2

These defines for a 2nd autoboot stop and delay string are nearly unused. Only
sc3 defines CONFIG_AUTOBOOT_DELAY_STR2. And a patch to remove this most likely
unmaintained board is also posted to the list.

By removing these defines the code will become cleaner and moving the remaining
compile options to Kconfig will get easier.

Signed-off-by: Stefan Roese <sr@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Heiko Schocher <hs@denx.de>
9 years agoKconfig: Enable usage of escape char '\' in string values
Stefan Roese [Fri, 29 May 2015 09:47:32 +0000 (11:47 +0200)]
Kconfig: Enable usage of escape char '\' in string values

I might have missed something, but I failed to use the escape char '\'
in strings. To pass a printf format string like "foo %d bar\n" via
Kconfig to the code.

Right now its not possible to use the escape character '\' in Kconfig
string values correctly to e.g. set this string value "test output\n".
The '\n' will be converted to 'n'.

The current implementation removes some of the '\' chars from the input
string in conf_set_sym_val(). Examples:

'\' -> ''
'\\' -> '\'
'\\\' -> '\'
'\\\\' -> '\\'
...

And then doubles the backslash chars in the output string in
sym_escape_string_value(). Example:

'\' -> '' -> ''
'\\' -> '\' -> '\\'
'\\\' -> '\' -> '\\'
'\\\\' -> '\\' -> '\\\\'
...

As you see in these examples, its impossible to generate a single '\'
charater in the output string as its needed for something like '\n'.

This patch now changes this behavior to not drop some backslashes in
conf_set_sym_val() and to not add new backslashes in the resulting
output string. Removing the function sym_escape_string_value()
completely as its not needed anymore.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Rini <trini@konsulko.com>
9 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-imx
Tom Rini [Mon, 8 Jun 2015 12:37:02 +0000 (08:37 -0400)]
Merge branch 'master' of git://denx.de/git/u-boot-imx

9 years agoimx: drop warning: unused variable 'max_freq'
Stefano Babic [Tue, 26 May 2015 17:53:41 +0000 (19:53 +0200)]
imx: drop warning: unused variable 'max_freq'

max_freq in print_cpuinfo is used only with
imx6.

Signed-off-by: Stefano Babic <sbabic@denx.de>
9 years agoot1200: setup i2c bus 1 in setup_iomux_i2c()
Christian Gmeiner [Wed, 3 Jun 2015 09:33:23 +0000 (11:33 +0200)]
ot1200: setup i2c bus 1 in setup_iomux_i2c()

On this bus there is a EEPROM containing EDID and ddr3
calibration information.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
9 years agoot1200: setup i2c bus in board_early_init_f(..)
Christian Gmeiner [Wed, 3 Jun 2015 09:33:22 +0000 (11:33 +0200)]
ot1200: setup i2c bus in board_early_init_f(..)

Make it possible to use the i2c bus in SPL.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
9 years agocolibri_vf: Enable board specific USB initialisation for USB pen gpio
Sanchayan Maity [Mon, 1 Jun 2015 13:07:25 +0000 (18:37 +0530)]
colibri_vf: Enable board specific USB initialisation for USB pen gpio

Add IOMUX for the pad used as USB pen. This needs to be driven low for
the Iris and Viola boards where it is pulled up high by default. This is
required for the USB host functionality to work on these boards. Use the
board specific weak initialisation function, to drive the pin low which
would be called on "usb start".

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
9 years agousb: ehci-vf: Add weak function for board specific initialisation
Sanchayan Maity [Mon, 1 Jun 2015 13:07:24 +0000 (18:37 +0530)]
usb: ehci-vf: Add weak function for board specific initialisation

Add a weak function board_ehci_hcd_init which can be used by the board
file for board specific initialisation.

Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
9 years agocolibri_vf: Add separate defconfig for device tree support
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:23 +0000 (18:37 +0530)]
colibri_vf: Add separate defconfig for device tree support

Most of the drivers available for Vybrid are not yet converted
to OF model to use device tree model, only few drivers
like SPI and GPIO drivers use device trees.
Add separate defconfig for who needs to use device tree model.
Later this can be integrated to single defconfig.

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agocolibri-vf: Enable SPI support
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:22 +0000 (18:37 +0530)]
colibri-vf: Enable SPI support

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
Acked-by: Stefan Agner <stefan@agner.ch>
9 years agovf610: dts: Add device tree support
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:21 +0000 (18:37 +0530)]
vf610: dts: Add device tree support

Add device tree files for Freescale Vybrid platform and
Toradex Colibri VF50, VF61 modules.
Device tree files are taken from upstream Kernel.
Removed the stuff which are not used/supported yet in U-Boot.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agoarm: vf610: Add iomux support for DSPI
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:20 +0000 (18:37 +0530)]
arm: vf610: Add iomux support for DSPI

Add iomux definitions for DSPI second instance.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agoarm: vf610: Add clock support for DSPI
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:19 +0000 (18:37 +0530)]
arm: vf610: Add clock support for DSPI

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agocolibri_vf: Enable GPIO support
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:18 +0000 (18:37 +0530)]
colibri_vf: Enable GPIO support

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agocolibri_vf: Add pinmux entries for GPIOs
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:17 +0000 (18:37 +0530)]
colibri_vf: Add pinmux entries for GPIOs

Inorder to use the pins as GPIO, apart from setting the alt-function,
pinmuxing need to be done, this patch adds pinmux entries of
few GPIOs.

Acked-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agodm: gpio: vf610: Add GPIO driver support
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:16 +0000 (18:37 +0530)]
dm: gpio: vf610: Add GPIO driver support

Add GPIO driver support to Freescale VF610

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agodm: gpio: uclass: Add flag to control sequence numbering
Bhuvanchandra DV [Mon, 1 Jun 2015 13:07:15 +0000 (18:37 +0530)]
dm: gpio: uclass: Add flag to control sequence numbering

Like SPI and I2C few GPIO controllers also have
multiple chip instances. This patch adds the
flag 'DM_UC_FLAG_SEQ_ALIAS' in gpio_uclass driver
to control device sequence numbering. By defalut
the dev->r_seq for gpio_uclass will alwalys
returns -1, which leads the gpio driver probe
failure when using the driver with device trees.

Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com>
9 years agomx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL and MX6SX
Fabio Estevam [Thu, 28 May 2015 15:33:34 +0000 (12:33 -0300)]
mx6_common: Fix LOADADDR and SYS_TEXT_BASE for MX6SL and MX6SX

Commit 8183058188cd2d942 ("imx6: centralise common boot options in
mx6_common.h") broke boot on mx6sl and mx6sx by assuming that all mx6
SoCs use the same LOADADDR/SYS_TEXT_BASE range, which is not correct.

DDR on mx6sx/mx6sl starts at 0x80000000.

Adjust LOADADDR/SYS_TEXT_BASE to the proper values for mx6sx/mx6sl,
so that these SoCs can boot again.

Also, TQMA6 requires a custom CONFIG_SYS_TEXT_BASE value, so move
its setting prior to the inclusion of mx6_common.h.

Signed-off-by: Fabio Estevam <fabio.estevam at freescale.com>
9 years agowandboard: Add board revision detection support
Fabio Estevam [Thu, 21 May 2015 22:24:05 +0000 (19:24 -0300)]
wandboard: Add board revision detection support

There are two revisions of wandboard: version B1 and C1.

Add the revision detection support, so that the correct dtb file can
be automatically loaded.

Based on the patch from Richard Hu <hakahu@gmail.com>.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Stefano Babic <sbabic@denx.de>
Tested-By: Vagrant Cascadian <vagrant@aikidev.net>
9 years agoimage-fit: Fix compiler warning in fit_conf_print()
Hans de Goede [Fri, 29 May 2015 13:09:48 +0000 (15:09 +0200)]
image-fit: Fix compiler warning in fit_conf_print()

This fixes the following compiler warning:

In file included from tools/common/image-fit.c:1:0:
./tools/../common/image-fit.c: In function ‘fit_conf_print’:
./tools/../common/image-fit.c:1470:27: warning: logical not is only applied
 to the left hand side of comparison [-Wlogical-not-parentheses]
    (const char **)&uname) > 0;

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agoMerge git://git.denx.de/u-boot-sunxi
Tom Rini [Sat, 6 Jun 2015 11:03:07 +0000 (07:03 -0400)]
Merge git://git.denx.de/u-boot-sunxi

9 years agosunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default
Hans de Goede [Wed, 3 Jun 2015 18:08:37 +0000 (20:08 +0200)]
sunxi: Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default

Select CONFIG_CMD_NET and CONFIG_CMD_SETEXPR by default rather then
needing to have this in every sunxi defconfig file.

This also fixes the Merrii_A80_Optimus defconfig no longer building.

Cc: Maxin B. John <maxin.john@enea.com>
Reported-by: Maxin B. John <maxin.john@enea.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: Add a proper dts file for the ga10h a33 based tablet
Hans de Goede [Tue, 2 Jun 2015 14:18:44 +0000 (16:18 +0200)]
sunxi: Add a proper dts file for the ga10h a33 based tablet

Add and use a proper dts for the ga10h a33 based tablet, as
submitted upstream.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agoMerge git://git.denx.de/u-boot-fdt
Tom Rini [Fri, 5 Jun 2015 16:14:01 +0000 (12:14 -0400)]
Merge git://git.denx.de/u-boot-fdt

9 years agoMerge git://git.denx.de/u-boot-dm
Tom Rini [Fri, 5 Jun 2015 15:21:08 +0000 (11:21 -0400)]
Merge git://git.denx.de/u-boot-dm

9 years agofdt: Documentation for a few support functions aside their prototypes
Paul Kocialkowski [Sun, 24 May 2015 10:01:53 +0000 (12:01 +0200)]
fdt: Documentation for a few support functions aside their prototypes

This instroduces comments that explain the purpose, parameters and return codes
of a few fdt support functions, that are used to fill the fdt.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agofdt: Pass the device serial number through devicetree
Paul Kocialkowski [Thu, 21 May 2015 09:27:03 +0000 (11:27 +0200)]
fdt: Pass the device serial number through devicetree

Before device-tree, the device serial number used to be passed to the kernel
using ATAGs (on ARM). This is now deprecated and all the handover to the kernel
should now be done using device-tree. Thus, this passes the serial-number
property to the kernel using the serial-number property of the root node, as
expected by the kernel.

The serial number is a string that somewhat represents the device's serial
number. It might come from some form of storage (e.g. an eeprom) and be
programmed at factory-time by the manufacturer or come from identification
bits available in e.g. the SoC.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Simon Glass <sgj@chromium.org>
9 years agosunxi: Rename Astar_MID756 to Et_q8_v1_6 to match kernel dts name
Hans de Goede [Tue, 2 Jun 2015 14:07:19 +0000 (16:07 +0200)]
sunxi: Rename Astar_MID756 to Et_q8_v1_6 to match kernel dts name

Rename the Astar_MID756 to Et_q8_v1_6 to match the kernel dts name.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: Sync dts files with the linux kernel
Hans de Goede [Tue, 2 Jun 2015 13:53:40 +0000 (15:53 +0200)]
sunxi: Sync dts files with the linux kernel

Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2 ,
this gives us a proper dtsi file for the A33 rather then abusing
sun8i-a23.dtsi for this.

And this replaces our minimal (dummy) sun7i-a20-mk808c and
sun8i-a33-astar-mid756 dts files with proper ones.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: gpio: Add "allwinner,sun8i-a33-pinctrl"
Hans de Goede [Tue, 2 Jun 2015 16:09:25 +0000 (18:09 +0200)]
sunxi: gpio: Add "allwinner,sun8i-a33-pinctrl"

Add "allwinner,sun8i-a33-pinctrl", this is used by the latest upstream
linux sunxi dts files.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: Add new Mele_A1000G_quad defconfig
Hans de Goede [Mon, 1 Jun 2015 14:37:24 +0000 (16:37 +0200)]
sunxi: Add new Mele_A1000G_quad defconfig

The Mele A1000G-quad and the Mele M9 have the same PCB, sofar we've been
using the same defconfig (and dts on the kernel side) for both models.
Unfortunately this does not work for the otg controller, on the M9 this
is routed to a micro-usb connector on the outside, while as on the
A1000G-quad it is connected to an usb to sata bridge.

This commit adds a new defconfig for the Mele-A1000G-quad to allow using
different otg controller settings on the 2 boards.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: usb_phy: Swap check for disconnect threshold
Hans de Goede [Sun, 31 May 2015 17:26:54 +0000 (19:26 +0200)]
sunxi: usb_phy: Swap check for disconnect threshold

Before this commit the code for determining the disconnect threshold was
checking for sun4i or sun6i assuming that those where the exception and
that newer SoCs use a disconnect threshold of 2 like sun7i does.

But it turns out that newer SoCs actually use a disconnect threshold of 3
and sun5i and sun7i are the exceptions, so check for those instead.

Here are the settings from the various Allwinner SDK sources:
 sun4i-a10: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun5i-a13: USBC_Phy_Write(usbc_no, 0x2a, 2, 2);
 sun6i-a31: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun7i-a20: USBC_Phy_Write(usbc_no, 0x2a, 2, 2);
 sun8i-a23: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun8i-h3:  USBC_Phy_Write(usbc_no, 0x2a, 3, 2);
 sun9i-a80: USBC_Phy_Write(usbc_no, 0x2a, 3, 2);

Note this commit makes no functional changes for sun4i - sun7i, and
changes the disconnect threshold for sun8i to match what Allwinner uses.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
9 years agosunxi: mmc: Enable pull-up on card-detect gpio pin
Hans de Goede [Sat, 30 May 2015 14:39:10 +0000 (16:39 +0200)]
sunxi: mmc: Enable pull-up on card-detect gpio pin

On some boards we need to enable the internal pull-up te reliable detect
that no card is inserted.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
9 years agogpio: fix typos in GPIO header
Masahiro Yamada [Fri, 29 May 2015 12:57:33 +0000 (21:57 +0900)]
gpio: fix typos in GPIO header

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agosandbox: Compile test device tree when CONFIG_UT_DM is defined
Simon Glass [Sat, 23 May 2015 17:53:57 +0000 (11:53 -0600)]
sandbox: Compile test device tree when CONFIG_UT_DM is defined

A conflict between the PMIC and unit test work means that the sandbox test
device tree file is no-longer built. Fix this.

Series-to: u-boot
Series-cc: joe, prz

Change-Id: I6616428e05713e5306f848e7dd0a645dedf0934e
Signed-off-by: Simon Glass <sjg@chromium.org>
9 years agosandbox: dts: Add the real-time-clock test nodes back in
Simon Glass [Fri, 22 May 2015 21:42:17 +0000 (15:42 -0600)]
sandbox: dts: Add the real-time-clock test nodes back in

These were lost when the PMIC series was applied. Add them back so that the
tests pass again.

Reported-by: Joe Hershberger <joe.hershberger@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agosandbox: dts: Sort the sandbox.dts file
Simon Glass [Fri, 22 May 2015 21:42:16 +0000 (15:42 -0600)]
sandbox: dts: Sort the sandbox.dts file

Sort this by node name for easier browsing.

Signed-off-by: Simon Glass <sjg@chromium.org>
9 years agosandbox: dts: Sort the test.dts file a little
Simon Glass [Fri, 22 May 2015 21:42:15 +0000 (15:42 -0600)]
sandbox: dts: Sort the test.dts file a little

There are some core test nodes near the beginning of the file which should
be grouped together. But for other nodes, let's sort them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agodm: Sort the uclass IDs after the tegra/PMIC addition
Simon Glass [Fri, 22 May 2015 21:42:14 +0000 (15:42 -0600)]
dm: Sort the uclass IDs after the tegra/PMIC addition

Tidy up the sort order again.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Joe Hershberger <joe.hershberger@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agodm: pci: Allow PCI bus numbering aliases
Simon Glass [Mon, 11 May 2015 03:08:06 +0000 (21:08 -0600)]
dm: pci: Allow PCI bus numbering aliases

Commit 9cc36a2 'dm: core: Add a flag to control sequence numbering' changed
the default uclass behaviour to not support bus numbering. This is incorrect
for PCI and that commit should have enabled the flag for PCI.

Enable it so that PCI buses can be found and the 'pci' command works again.
Also add a test for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
9 years agosandbox: Tidy up terminal restore
Simon Glass [Mon, 11 May 2015 03:07:27 +0000 (21:07 -0600)]
sandbox: Tidy up terminal restore

For some reason 'u-boot -D' does not restore the terminal correctly when
the 'reset' command is used. Call the terminal restore function explicitly
in this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agox86: minnowmax: initialize the pin-muxing from device tree
Gabriel Huau [Tue, 12 May 2015 06:18:25 +0000 (23:18 -0700)]
x86: minnowmax: initialize the pin-muxing from device tree

Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: gpio: add pinctrl support from the device tree
Gabriel Huau [Tue, 26 May 2015 05:27:37 +0000 (22:27 -0700)]
x86: gpio: add pinctrl support from the device tree

Every pin can be configured now from the device tree. A dt-bindings
has been added to describe the different property available.

Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975
Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: baytrail: pci region 3 is not always mapped to end of ram
Andrew Bradford [Wed, 3 Jun 2015 16:37:39 +0000 (12:37 -0400)]
x86: baytrail: pci region 3 is not always mapped to end of ram

Baytrail physically maps the first 2 GB of SDRAM from 0x0 to 0x7FFFFFFF
and additional SDRAM is mapped from 0x100000000 and up.  There is a
physical memory hole from 0x80000000 to 0xFFFFFFFF for other uses.
Because of this, PCI region 3 should only try to use up to the amount of
SDRAM or 0x80000000, which ever is less.

Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Implement PIRQ routing
Bin Meng [Wed, 3 Jun 2015 01:20:06 +0000 (09:20 +0800)]
x86: qemu: Implement PIRQ routing

Support QEMU PIRQ routing via device tree on both i440fx and q35
platforms. With this commit, Linux booting on QEMU from U-Boot
has working ATA/SATA, USB and ethernet.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: coreboot: Control I/O port 0xb2 writing via device tree
Bin Meng [Wed, 3 Jun 2015 01:20:05 +0000 (09:20 +0800)]
x86: coreboot: Control I/O port 0xb2 writing via device tree

Writing 0xcb to I/O port 0xb2 (Advanced Power Management Control) causes
U-Boot to hang on QEMU q35 target. We introduce a config option in the
device tree "u-boot,no-apm-finalize" under /config node if we don't want
to do that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Create separate i440fx and q35 device trees
Bin Meng [Wed, 3 Jun 2015 01:20:04 +0000 (09:20 +0800)]
x86: qemu: Create separate i440fx and q35 device trees

Although the two qemu-x86 targets (i440fx and q35) share a lot in
common, they still have something that cannot easily handled in one
single device tree). Split to create two dedicated device tree files
and make the i440fx be the default build target.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: coreboot: Fix cosmetic issues
Bin Meng [Wed, 3 Jun 2015 01:20:02 +0000 (09:20 +0800)]
x86: coreboot: Fix cosmetic issues

Clean up arch/x86/cpu/coreboot.c to fix several cosmetic issues.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP
Bin Meng [Mon, 1 Jun 2015 13:07:23 +0000 (21:07 +0800)]
x86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP

FSP_TEMP_RAM_ADDR should only be visible when HAVE_FSP is on.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agotools: ifdtool: Do not write region while its size is negative
Bin Meng [Sun, 31 May 2015 06:57:35 +0000 (14:57 +0800)]
tools: ifdtool: Do not write region while its size is negative

We should ignore those regions whose size is negative. These are
typically optional and unused regions (like GbE and platform data).

Change-Id: I65ad01746144604a1dc0588b617af21f2722ebbf
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Adjust VGA initialization
Bin Meng [Mon, 25 May 2015 14:36:27 +0000 (22:36 +0800)]
x86: qemu: Adjust VGA initialization

As VGA option rom needs to run at C segment, although QEMU PAM emulation
seems to only guard E/F segments, for correctness, move VGA initialization
after PAM decode C/D/E/F segments.

Also since we already tested QEMU targets to differentiate I440FX and Q35
platforms, change to locate the VGA device via hardcoded b.d.f instead of
dynamic search for its vendor id & device id pair.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Enable legacy IDE I/O ports decode
Bin Meng [Mon, 25 May 2015 14:36:26 +0000 (22:36 +0800)]
x86: qemu: Enable legacy IDE I/O ports decode

QEMU always decode legacy IDE I/O ports on PIIX chipset. However Linux ata_piix
driver does sanity check to see whether legacy ports decode is turned on.
To make Linux ata_piix driver happy, turn on the decode via IDE_TIMING register.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Turn on legacy segments decode
Bin Meng [Sat, 23 May 2015 16:12:33 +0000 (00:12 +0800)]
x86: qemu: Turn on legacy segments decode

By default the legacy segments C/D/E/F do not decode to system RAM.
Turn on the decode via Programmable Attribute Map (PAM) registers
so that we can write configuration tables in the F segment.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Make host bridge (b.d.f=0.0.0) visible
Bin Meng [Sat, 23 May 2015 16:12:32 +0000 (00:12 +0800)]
x86: qemu: Make host bridge (b.d.f=0.0.0) visible

The default weak version of pci_skip_dev() in drivers/pci/pci_common.c
skips the host bridge (b.d.f = 0.0.0) which is actually the i440fx/q35
chipset for QEMU targets. Define CONFIG_PCI_CONFIG_HOST_BRIDGE to make
it visible in the PCI configuration space.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: fsp_support: Correct high mem comment typo
Andrew Bradford [Fri, 22 May 2015 19:11:23 +0000 (15:11 -0400)]
x86: fsp_support: Correct high mem comment typo

High mem starts at 4 GiB.

Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Do sanity test on pirq table before writing
Bin Meng [Mon, 25 May 2015 14:35:07 +0000 (22:35 +0800)]
x86: Do sanity test on pirq table before writing

If pirq_routing_table points to NULL, that means U-Boot fails to
generate the table before in create_pirq_routing_table(), so we
test it against NULL before actually writing it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: quark: Implement PIRQ routing
Bin Meng [Mon, 25 May 2015 14:35:06 +0000 (22:35 +0800)]
x86: quark: Implement PIRQ routing

Intel Quark SoC has the same interrupt routing mechanism as the
Queensbay platform, only the difference is that PCI devices'
INTA/B/C/D are harcoded and cannot be changed freely.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Document irq router device tree bindings
Bin Meng [Mon, 25 May 2015 14:35:05 +0000 (22:35 +0800)]
x86: Document irq router device tree bindings

Describe all required properties needed by the irq router device tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Refactor PIRQ routing support
Bin Meng [Mon, 25 May 2015 14:35:04 +0000 (22:35 +0800)]
x86: Refactor PIRQ routing support

PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memory-mapped IBASE) to configure the legacy
8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing
support using device tree and move it to a common place, so that we
can easily add PIRQ routing support on a new platform.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Add ATA/SATA support
Bin Meng [Sat, 16 May 2015 01:33:19 +0000 (09:33 +0800)]
x86: qemu: Add ATA/SATA support

Enable legacy IDE support on the pc target and AHCI support on the
q35 target. Default configuration is to support the pc target.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Add CONFIG_LBA48 and remove CONFIG_ATAPI in x86-common.h
Bin Meng [Sat, 16 May 2015 01:33:18 +0000 (09:33 +0800)]
x86: Add CONFIG_LBA48 and remove CONFIG_ATAPI in x86-common.h

Enable CONFIG_LBA48 to support large disks. CONFIG_ATAPI is only needed
by cmd_ide.c which is not common for modern x86 targets, hence remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agocmd_ide: Eliminate build warnings in atapi_inquiry()
Bin Meng [Sat, 16 May 2015 01:33:17 +0000 (09:33 +0800)]
cmd_ide: Eliminate build warnings in atapi_inquiry()

Eliminate the following build warning in atapi_inquiry():
  "warning: assignment from incompatible pointer type [enabled by default]"

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agopci: Do not skip legacy IDE device configuration
Bin Meng [Sat, 16 May 2015 01:33:15 +0000 (09:33 +0800)]
pci: Do not skip legacy IDE device configuration

The legacy IDE device has a BAR4 (Bus Master Interface BAR) which
needs to be configured.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agopci: Allow debug message output in pci_auto.c
Bin Meng [Sat, 16 May 2015 01:33:14 +0000 (09:33 +0800)]
pci: Allow debug message output in pci_auto.c

Remove the '#undef DEBUG' in pci_auto.c so that we can enable debug
message output via '-DDEBUG'.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: qemu: Add graphics support
Bin Meng [Sun, 10 May 2015 23:36:30 +0000 (07:36 +0800)]
x86: qemu: Add graphics support

It turns out that QEMU x86 emulated graphic card has a built-in
option ROM which can be run perfectly with native mode by U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig
Bin Meng [Sun, 10 May 2015 23:36:29 +0000 (07:36 +0800)]
x86: Move FRAMEBUFFER_SET_VESA_MODE etc to video Kconfig

CONFIG_FRAMEBUFFER_SET_VESA_MODE and CONFIG_FRAMEBUFFER_VESA_MODE
are not x86-specific, so move them to drivers/video/Kconfig and
make them depend on VIDEO_VESA driver. Some cosmetic fixes are
applied to the Kconfig help text as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agovideo: Kconfig: Make VESA driver avaiable for non-x86 boards
Bin Meng [Sun, 10 May 2015 23:36:28 +0000 (07:36 +0800)]
video: Kconfig: Make VESA driver avaiable for non-x86 boards

There is no reason to prevent CONFIG_VIDEO_VESA driver working on
non-x86 boards, so remove such limitation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Remove DECLARE_GLOBAL_DATA_PTR in board files
Bin Meng [Thu, 30 Apr 2015 11:05:24 +0000 (19:05 +0800)]
x86: Remove DECLARE_GLOBAL_DATA_PTR in board files

gd is not referenced in those board files so DECLARE_GLOBAL_DATA_PTR
should be removed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Update README.x86 for QEMU support
Bin Meng [Thu, 7 May 2015 13:34:12 +0000 (21:34 +0800)]
x86: Update README.x86 for QEMU support

Document how to build and test U-Boot with QEMU.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Change coreboot default build configuration to QEMU
Bin Meng [Thu, 7 May 2015 13:34:11 +0000 (21:34 +0800)]
x86: Change coreboot default build configuration to QEMU

QEMU is much easier for us test booting U-Boot as a coreboot payload
than having a real board like chromebook_link.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
9 years agox86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86-common.h
Bin Meng [Thu, 7 May 2015 13:34:10 +0000 (21:34 +0800)]
x86: Set CONFIG_NR_DRAM_BANKS to 8 and move it to x86-common.h

Some x86 boards set CONFIG_NR_DRAM_BANKS to 1, which causes incorrect
DRAM size printed when booting from coreboot, like this:

CPU: x86, vendor Intel, device 663h
DRAM:  636 KiB
Using default environment

Change it to 8 which should be enough for both coreboot and bare
cases, and move it to x86-common.h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agox86: Make QEMU the default vendor
Bin Meng [Thu, 7 May 2015 13:34:09 +0000 (21:34 +0800)]
x86: Make QEMU the default vendor

Now that we have QEMU support, make it the default vendor in the
'make menuconfig' screen.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
9 years agox86: Support QEMU x86 targets
Bin Meng [Thu, 7 May 2015 13:34:08 +0000 (21:34 +0800)]
x86: Support QEMU x86 targets

This commit introduces the initial U-Boot support for QEMU x86 targets.
U-Boot can boot from coreboot as a payload, or directly without coreboot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Merged in patch 'x86: qemu: Add CMD_NET to qemu-x86_defconfig
   https://patchwork.ozlabs.org/patch/479745/

9 years agopci: Move pci_hose_phys_to_bus() to pci_common.c
Bin Meng [Thu, 7 May 2015 13:34:07 +0000 (21:34 +0800)]
pci: Move pci_hose_phys_to_bus() to pci_common.c

pci_hose_phys_to_bus() is needed by several drivers. Move it to
pci_common.c to avoid a broken build when CONFIG_DM_PCI is on.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
9 years agoboard/BuR/common: fix netconsole
Hannes Schmelzer [Thu, 28 May 2015 14:41:54 +0000 (16:41 +0200)]
board/BuR/common: fix netconsole

netconsole had become defective over time and cleanups.
Because the feature is used very rarely nobody did take notice about this
defect.

With this patch the resulting syntax error on call will be fixed.

Signed-off-by: Hannes Schmelzer <oe5hpm@oevsv.at>
9 years agoconfigs: remove CONFIG_NET_MULTI
Lars Poeschel [Tue, 2 Jun 2015 09:25:54 +0000 (11:25 +0200)]
configs: remove CONFIG_NET_MULTI

CONFIG_NET_MULTI is not used anywhere and thus can safely be removed
from the configs.

Acked-by: Marek Vasut <marex@denx.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
9 years agoARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ
Lars Poeschel [Tue, 2 Jun 2015 09:23:04 +0000 (11:23 +0200)]
ARM: phytec: pcm051: Remove unneeded CONFIG_USE_IRQ

The config for pcm051 still undef'd CONFIG_USE_IRQ. This is not
needed any more since it is not defined in the whole include path
before.

Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
9 years agoMerge branch 'master' of git://git.denx.de/u-boot-net
Tom Rini [Mon, 1 Jun 2015 20:47:23 +0000 (16:47 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-net

Fixup include/configs/unipher.h to not set CONFIG_LIB_RAND

Signed-off-by: Tom Rini <trini@konsulko.com>
9 years agonet: Fix NET_RANDOM_ETHADDR dependencies
Michal Simek [Mon, 25 May 2015 09:37:22 +0000 (11:37 +0200)]
net: Fix NET_RANDOM_ETHADDR dependencies

NET_RANDOM_ETHADDR depends on lib/rand.c. This patch adds dependency to
Kconfig to ensure that library is also compiled.

Remove the definitions from Blackfin boards' include/configs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agonet: Move the CMD_NET config to defconfigs
Joe Hershberger [Sat, 30 May 2015 00:46:35 +0000 (19:46 -0500)]
net: Move the CMD_NET config to defconfigs

This also selects CONFIG_NET for any CONFIG_CMD_NET board.

Remove the imx default for CONFIG_NET.

This moves the config that was defined by 60296a8 (commands: add more
command entries in Kconfig).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agoMove setexpr to Kconfig
Joe Hershberger [Wed, 6 May 2015 00:08:13 +0000 (19:08 -0500)]
Move setexpr to Kconfig

Another shell scripting command that has not been moved.

Moved using tools/moveconfig.py using these settings:

CMD_SETEXPR bool n y

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
9 years agoblackfin: fix build error on bct-brettl2 board
Masahiro Yamada [Tue, 26 May 2015 03:42:13 +0000 (12:42 +0900)]
blackfin: fix build error on bct-brettl2 board

Commit 76ec988b062e (net: Remove all calls to net_random_ethaddr())
accidentally deleted CONFIG_TARGET_BCT_BRETTL2=y, and since then
bct-brettl2 would not build.

Since commit a26cd04920dc (arch: Make board selection choices
optional), Kconfig actually allows such a .config file in which no
board is selected, but the build never succeeds.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agosparc: fix build error on gr_ep2s60 board
Masahiro Yamada [Tue, 26 May 2015 01:58:31 +0000 (10:58 +0900)]
sparc: fix build error on gr_ep2s60 board

Commit 92ac52082140 (net: Remove all references to CONFIG_ETHADDR
and friends) accidentally dropped #endif.  Since then, gr_ep2s60
could not build.

scripts/kconfig/conf --silentoldconfig Kconfig
  CHK     include/config.h
  GEN     include/autoconf.mk
In file included from include/config.h:5:0,
                 from ./include/common.h:18:
include/configs/gr_ep2s60.h:15:0: error: unterminated #ifndef
 #ifndef __CONFIG_H__
 ^
make[1]: *** [include/autoconf.mk] Error 1

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
9 years agoMerge branch 'rmobile' of git://git.denx.de/u-boot-sh
Tom Rini [Mon, 1 Jun 2015 11:16:36 +0000 (07:16 -0400)]
Merge branch 'rmobile' of git://git.denx.de/u-boot-sh

9 years agoarm: mx6: tqma6: use default CONFIG_SYS_PBSIZE
Markus Niebel [Tue, 12 May 2015 08:55:40 +0000 (10:55 +0200)]
arm: mx6: tqma6: use default CONFIG_SYS_PBSIZE

this removes a config entry and uses the default value
defined in config_fallbacks.h. This implements the same
behaviour as a patch series for other i.MX6 boards from
Freescale

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
9 years agoarm: mx6: tqma6: fix spelling error in condition
Markus Niebel [Tue, 12 May 2015 08:55:39 +0000 (10:55 +0200)]
arm: mx6: tqma6: fix spelling error in condition

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
9 years agoimx: ventana: skip mtdparts fixup if no flash
Tim Harvey [Tue, 26 May 2015 18:04:58 +0000 (11:04 -0700)]
imx: ventana: skip mtdparts fixup if no flash

This avoids an error message on NAND-less boards.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
9 years agoimx: ventana: hang if board model could not be determined
Tim Harvey [Tue, 26 May 2015 18:04:57 +0000 (11:04 -0700)]
imx: ventana: hang if board model could not be determined

If the EEPROM could not be read or is corrupt we always want to hang.
Note that an error message will have been displayed by read_eeprom in this
case.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
9 years agoimx: ventana: make fdt_file1 and fdt_file2 automatic and non-overridable
Tim Harvey [Tue, 26 May 2015 18:04:56 +0000 (11:04 -0700)]
imx: ventana: make fdt_file1 and fdt_file2 automatic and non-overridable

The fdt_file1 and fdt_file2 vars provide fallbacks for the fdt file loading
script. There is no need to allow the user to override these as if they
want to specify the fdt, they should do so in the first attempt which is
the fdt_file var.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
9 years agoimx: ventana: make model env var automatic and non-overridable
Tim Harvey [Tue, 26 May 2015 18:04:55 +0000 (11:04 -0700)]
imx: ventana: make model env var automatic and non-overridable

We want to model env var to always reflect what was in the EEPROM. There
is no point in allowing a user to override this.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
9 years agoimx: ventana: various board-specific GPIO config updates
Tim Harvey [Tue, 26 May 2015 18:04:54 +0000 (11:04 -0700)]
imx: ventana: various board-specific GPIO config updates

- Added iomux for CAN_STBY and RS484_TEN (GW52xx/GW53xx/GW54xx/GW551x)
- Moved iomux of USBHUB_RST# out of board_ehci_hcd_init so that it is
  done regardless of USB being initialized in bootloader
- Added usb_sel iomux/hwconfig for GW552x
- Fixed mezzanine DIO for GW54xx
- Fixed PANLEDR# for GW54xx
- Fixed dio iomux/hwconfig for GW552x
- Fixed dio iomux for GW551x
- removed redundant #define

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
9 years agomxs: Do not disable bo detection when DC-DC is already enabled
Stefan Wahren [Thu, 21 May 2015 11:20:17 +0000 (11:20 +0000)]
mxs: Do not disable bo detection when DC-DC is already enabled

In case the DC-DC is already enabled mxs_enable_4p2_dcdc_input() returns
without reenabling brown out detection. So fix this issue by
moving the return before brown out deactivation.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Marek Vasut <marex@denx.de>