Test skip option.

Provide C test cases with the option to skip tests and subtests.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8695)

Skip the no derivation functions when in FIPS mode because they are not
applicable.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8695)

Fixed 32bit issue for kdf_opts

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8901)

Don't use '-z defs' if sanitizers are used

There are quite a number of sanitizers for clang that aren't
documented in the clang user documentation.  This makes it impossible
to be selective about what sanitizers to look at to determine if
'-z defs' should be used of not.

Under these circumstances, the sane thing to do is to just look for
any sanitizer specification and not use '-z defs' if there's one
present.

Fixes #8735

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8892)

crypto/ppccap.c: Fix which hwcap value used to check for HWCAP_ARCH_3_00

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8889)

Squashed commit of the following:

Add new option '-http_server_binmode' which allows the server to open and send
binary files as well as text.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8811)

ossl_bsearch(): New generic internal binary search utility function

OBJ_bsearch_ and OBJ_bsearch_ex_ are generic functions that don't
really belong with the OBJ API, but should rather be generic utility
functions.  The ending underscore indicates that they are considered
internal, even though they are declared publicly.

Since crypto/stack/stack.c uses OBJ_bsearch_ex_, the stack API ends up
depending on the OBJ API, which is unnecessary, and carries along
other dependencies.

Therefor, a generic internal function is created, ossl_bsearch().
This removes the unecessary dependencies.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8899)

Allow specifying the tag after AAD in CCM mode

This change allows to pass the authentication tag after specifying
the AAD in CCM mode. This is already true for the other two supported
AEAD modes (GCM and OCB) and it seems appropriate to match the
behavior.

GCM and OCB also support to set the tag at any point before the call
to `EVP_*Final`, but this won't work for CCM due to a restriction
imposed by section 2.6 of RFC3610: The tag must be set before
actually decrypting data.

This commit also adds a test case for setting the tag after supplying
plaintext length and AAD.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7243)

EVP_EncryptUpdate, EVP_EncryptFinal_ex: don't branch on uninitialized memory

If ctx->cipher->cupdate/ctx->cipher->cfinal failed, 'soutl' is left
uninitialized.

This patch incorporates the same logic as present in EVP_DecryptUpdate and
EVP_DecryptFinal_ex: only branch on 'soutl' if the preceding call succeeded.

Bug found by OSS-Fuzz.

Signed-off-by: Guido Vranken <guidovranken@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8874)

Coverity CID 1444950: Control flow issues

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444951: Null pointer dereferences

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444952: Null pointer dereferences

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444953: Null pointer dereferences

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444954: Integer handling issues

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444955: Null pointer dereferences

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444956: Integer handling issues

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444957: Error handling issues

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444958: Null pointer dereferences

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444959: Integer handling issues

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444960: Error handling issues

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444961: Integer handling issues

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Coverity CID 1444963: Null pointer dereferences

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8888)

Reject obviously invalid DSA parameters during signing

Fixes #8875

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8876)

ssl: Add SSL_sendfile

This commit adds the SSL_sendfile call, which allows KTLS sockets to
transmit file using zero-copy semantics.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)

Linux ktls sendfile

This commit introduces support for Linux KTLS sendfile.
Sendfile semantics require the use of a kernel TLS socket to construct the TLS
record headers, encrypt and authenticate the data.
KTLS sendfile improves performance by avoiding the copy of file data into user
space, which is required today.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8727)

man: fix a typo and a grammar nit in EVP_PKEY_meth_new(3)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8893)

Change the digest string from "md" to "digest"

Conform to other modules which were changed at the last minute and this
discrepancy was not noticed.
Retain "md" as an alias so not to break 3rd party backports/tests scripts.

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8783)

Added generated files for EVP_KDF changes

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8808)

Added EVP_KDF (similiar to the EVP_MAC)

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8808)

Add documentation for running unit tests under Valgrind

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8867)

Update internal documentation after global data move to OPENSSL_CTX

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)

Add some TODO notes into init.c

We should be seeking to move the OPENSSL_init_crypto and OPENSSL_cleanup
processing into OPENSSL_CTX instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)

Instead of global data store it in an OPENSSL_CTX

Various core and property related code files used global data. We should
store all of that in an OPENSSL_CTX instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)

Add support for openssl_ctx_run_once and openssl_ctx_onfree

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8857)

Use vxRandLib for VxWorks7

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8023)

openssl cms: add error message if operation option is missing

If the `openssl cms` command is called without specifying an
operation option, it replies with the following laconic error message:

    cms: Use -help for summary.

This commit adds a helpful error message:

    No operation option (-encrypt|-decrypt|-sign|-verify|...) specified.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8861)

Test: use keywords instead of magic numbers for 'rsa_pss_saltlen'

Since commit 137096a7ead it is possible to specify keywords instead
of negative magic numbers for the salt length. This commit replaces
the remaining occurrences of `rsa_pss_saltlen:-3` in the test recipes
by `rsa_pss_saltlen:max`.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8860)

Allow setting RCFLAGS as Configure option or environment variable

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8803)

Add RCFLAGS variable in Windows build file, and use it

- Allow user-defined RCFLAGS
- Pass RCFLAGS to RC

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8803)

Fix no-srp

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8850)

p_get_params() [test/p_test.c]: clear the OSSL_PARAM buffers for every test

Fixes #8796

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8851)

gendsa: dsaparam: introduce -verbose option to enable output

Other commands like 'req' support -verbose, so why not gendsa and dsaparam?

Part of a larger and more ambitious effort to add -verbose to all apps
that might be used in scripts and need to otherwise run silently (well,
without belching out anything that isn't a warning or error... which ties
into a later scrub of using STDOUT were appropriate for informative
messages instead of STDERR)... so that scripts also have the option of
doing >/dev/null without losing anything critical.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6908)

genrsa: introduce -verbose option to enable output

Other commands like 'req' support -verbose, so why not genrsa?

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6897)

Structure alignment macro.

Introduce a macro that allows all structure alignment tricks to be rolled up
into a single place.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8845)

Replumbing: give the possibility for the provider to create a context

OSSL_provider_init() gets another output parameter, holding a pointer
to a provider side context.  It's entirely up to the provider to
define the context and what it's being used for.  This pointer is
passed back to other provider functions, typically the provider global
get_params and set_params functions, and also the diverse algorithm
context creators, and of course, the teardown function.

With this, a provider can be instantiated more than once, or be
re-loaded as the case may be, while maintaining instance state.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8848)

Replumbing: make the oneshot proider cipher function like the others

The OP_cipher_final function takes a return output size and an output
buffer size argument.  The oneshot OP_cipher_cipher function should do
the same.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8849)

FIPS: Fix compiler errors in rsa_chk.c when building with `-DFIPS_MODE`

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8843)

Configure: process shared-info.pl later

The reason is that the shared-info attributes may depend on %disabled,
so we need to process all enablings/disablings first.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8846)

Squashed commit of the following:

Digest stored entropy for CRNG test.

Via the FIPS lab, NIST confirmed:

    The CMVP had a chance to discuss this inquiry and we agree that
    hashing the NDRNG block does meet the spirit and letter of AS09.42.

    However, the CMVP did have a few questions: what hash algorithm would
    be used in this application? Is it approved? Is it CAVs tested?

SHA256 is being used here and it will be both approved and CAVs tested.

This means that no raw entropy needs to be kept between RNG seedings, preventing
a potential attack vector aganst the randomness source and the DRBG chains.

It also means the block of secure memory allocated for this purpose is no longer
required.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8790)

Collapse ssl3_state_st (s3) into ssl_st

With the removal of SSLv2, the s3 structure is always allocated, so
there is little point in having it be an allocated pointer. Collapse
the ssl3_state_st structure into ssl_st and fixup any references.

This should be faster than going through an indirection and due to
fewer allocations, but I'm not seeing any significant performance
improvement; it seems to be within the margin of error in timing.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7888)

Copy RSA-PSS saltlen in EVP_PKEY_CTX_dup.

pkey_rsa_copy was missing a field. Test this by repeating the operation
through an EVP_PKEY_CTX_dup copy in evp_test.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8759)

s390x assembly pack: remove poly1305 dependency on non-base memnonics

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

s390x assembly pack: remove chacha20 dependency on non-base memnonics

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

s390x assembly pack: update perlasm module

Add non-base instructions which are used by the chacha20 and
poly1305 modules.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

s390x assembly pack: allow alignment hints for vector load/store

z14 introduced alignment hints to help vector load/store
performance. For its predecessors, alignment hint defaults
to 0 (no alignment indicated).

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8181)

Statistically test BN_rand_range().

Add a Chi^2 goodness of fit test to empirically provide a degree of confidence
in the uniformity of the output of the random range generation function.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8818)

Fix error in BIO_get_ktls_send() and BIO_get_ktls_recv()

If we were using a different type of BIO than a socket BIO then
BIO_get_ktls_send() and BIO_get_ktls_recv() could return the wrong
result.

The above occurred even if KTLS was disabled at compile time - so we should
additionally ensure that those macros do nothing if KTLS is disabled.

Finally we make the logic in ssl3_get_record() a little more robust when
KTLS has been disabled.

[extended tests]

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)

Fix KTLS compilation error

If the kernel headers are sufficiently recent to have KTLS transmit
support, but not recent enough to have KTLS receive support then a
compilation error would be the result.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8793)

Enforce a strict output length check in CRYPTO_ccm128_tag

Return error if the output tag buffer size doesn't match
the tag size exactly. This prevents the caller from
using that portion of the tag buffer that remains
uninitialized after an otherwise succesfull call to
CRYPTO_ccm128_tag.

Bug found by OSS-Fuzz.

Fix suggested by Kurt Roeckx.

Signed-off-by: Guido Vranken <guidovranken@gmail.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8810)

doc: Get rid of unrelated reference to DSA_new()

CLA: trivial

Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8786)

added openssl app 'kdf' and 'mac' to the NEWS and CHANGES docs

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8762)

Added app for EVP_KDF

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8762)

Recognise clang -fsanitize options and translate them

Because we depend on knowing if clang's address, memory or undefinedbehavior
sanitizers are enabled, we make an extra effort to detect them among the
C flags, and adjust the %disabled values accordingly.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8778)

Add a way for the application to get OpenSSL configuration data

OpenSSL_version(OPENSSL_DIR) gives you a nicely formatted string for
display, but if all you really want is the directory itself, you were
forced to parsed the string.

This introduces a new function to get diverse configuration data from
the library, OPENSSL_info().  This works the same way as
OpenSSL_version(), but has its own series of types, currently
including:

OPENSSL_INFO_CONFIG_DIR         returns OPENSSLDIR
OPENSSL_INFO_ENGINES_DIR        returns ENGINESDIR
OPENSSL_INFO_MODULES_DIR        returns MODULESDIR
OPENSSL_INFO_DSO_EXTENSION      returns DSO_EXTENSION

OPENSSL_INFO_DIR_FILENAME_SEPARATOR     returns directory/filename separator
OPENSSL_INFO_LIST_SEPARATOR             returns list separator

For scripting purposes, this also adds the command 'openssl info'.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)

Add the possibility to display and use MODULESDIR

This adds the flag OPENSSL_MODULES_DIR for OpenSSL_version(), and the
flag '-m' for 'openssl version'.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8709)

Configure: make disabling stuff easier and safer

Disabling one thing may mean having to disable other things as well.
We already have a process to auto-disable things through cascading,
but that was under-used.

Making the cascading mechanism available through a function to be
called to disable stuff makes it more automatic, and helps us when we
forget how different disabling options affect others.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8812)

Configure: recognise -static even if given through variables

Fixes #8787

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8812)

Configure: merge all of %user and %useradd into %config earlier

This came about with the realisation that upper case CFLAGS, LDFLAGS
and so on aren't treated much after that, and this makes figuring out
user added flags significantly easier, just look in %config.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8812)

If key or iv is NULL set the respective length to 0

[extended tests]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8794)

Fix EVP_CIPHER_CTX_rand_key()

Make sure we use the the correct key length in EVP_CIPHER_CTX_rand_key().
Now that ciphers may come from providers we need to make sure we ask the
provider for the value if appropriate.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8794)

Fix no-ec2m

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/8792)

Fix bug in entropy gathering.

This only impacts FIPS mode or someone who has enabled the FIPS 140.2
4.9.2 Conditional Tests.  i.e. nobody currently.

Fix a significant issue in the entropy gathering for the continuous RNG
testing.  The impact is using an uninitialised buffer instead of the gathered
entropy.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/8789)

Check if num is 0 before trying to malloc memory. Otherwise for client hellos without extensions SSL_client_hello_get1_extensions_present will return MALLOC_FAILURE.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8756)

Add some more test vectors for ChaCha20

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8780)

Clarify the documentation on the use of ChaCha20

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8780)

Create provider errors and use them

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Fix the S390X support for the basic AES ciphers

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add forward declarations of the AES dispatch table functions

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Make implementation of blocksize, iv_length and key_length mandatory

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add a maximum output length to update and final calls

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add iv length and key length params to the cipher init calls

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CTR ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CFB ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES OFB ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CBC ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add support in the default provider for 192/128 bit AES ECB

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add the provider_algs.h internal header file

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement support for AES-256-ECB in the default provider

We also lay the ground work for various of other the basic AES ciphers.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Make EVP_Encrypt*/EVP_Decrypt* and EVP_Cipher* provider aware

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

ossl_method_store_cache_get(): ensure non-NULL property query

The comparator further down the call stack doesn't tolerate NULL, so
if we got that as input, use the empty string.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

OPENSSL_LH_flush(): assign NULL after freeing

OPENSSL_LH_flush() frees the linked lists for each slot, but didn't
set the list head to NULL after doing so, with the result that an
operation that affects these lists is likely to cause a crash.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

Fix the generic EVP algorithm fetch to actually cache them

ossl_method_store_cache_get() and ossl_method_store_cache_set() were
called with a NULL argument for store, which means no caching is
done.  Give them a real store instead.

Also, increment the refcount when we do get a method out of the cache.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

asn1parse: avoid double free

|str| was used for multiple conflicting purposes.  When using
'-strictpem', it's used to uniquely hold a reference to the loaded
payload.  However, when using '-strparse', |str| was re-used to hold
the position from where to start parsing.

So when '-strparse' and '-strictpem' are were together, |str| ended up
pointing into data pointed at by |at|, and was yet being freed, with
the result that the payload it held a reference to became a memory
leak, and there was a double free conflict when both |str| and |at|
were being freed.

The situation is resolved by always having |buf| hold the pointer to
the file data, and always and only use |str| to hold the position to
start parsing from.  Now, we only need to free |buf| properly and not
|str|.

Fixes #8752

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8753)

Add SSHKDF in evp_kdf_test

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8774)

chacha/asm/chacha-armv8.pl: replace 3+1 code paths with 4+1.

The change is triggered by ThunderX2 where 3+1 was slower than scalar
code path, but it helps all processors [to handle <512 inputs].

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

aes/asm/aesv8-armx.pl: ~20% improvement on ThunderX2.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

ARM64 assembly pack: add ThunderX2 results.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

SP 800-56B steps enumerated.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8770)

Add test for the BIO_s_mem rdwr->rdonly->rdwr use-case

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Add documentation for the BIO_s_mem pecularities

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)