librecmc/librecmc.git
7 years agogeneric: make switch_port_stats tx/rx_bytes long long
Thibaut VARENE [Fri, 4 Aug 2017 10:32:04 +0000 (12:32 +0200)]
generic: make switch_port_stats tx/rx_bytes long long

This generic structure defines tx_bytes and rx_bytes as unsigned long (u32),
while several devices would typically report unsigned long long (u64).

The code can work as is, but there's a chance that with a sufficiently fast
interface the overflow might happen too fast to be correctly noticed by the
consumers of this data.

This patch makes both field unsigned long long and updates the only known
consumer of this data: swconfig_leds.c

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agogeneric: provide get_port_stats() on rtl836x switches
Thibaut VARENE [Fri, 4 Aug 2017 10:29:52 +0000 (12:29 +0200)]
generic: provide get_port_stats() on rtl836x switches

This patch provides a generic switch_dev_ops 'get_port_stats()' callback by
taping into the relevant port MIB counters.

This callback is used by swconfig_leds led trigger to blink LEDs with port
network traffic.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agogeneric: provide get_port_stats() on b53 switches
Thibaut VARENE [Fri, 4 Aug 2017 10:29:19 +0000 (12:29 +0200)]
generic: provide get_port_stats() on b53 switches

This patch provides a generic switch_dev_ops 'get_port_stats()' callback by
taping into the relevant port MIB counters.

This callback is used by swconfig_leds led trigger to blink LEDs with port
network traffic.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agogeneric: provide get_port_stats() on adm6996 switches
Thibaut VARENE [Fri, 4 Aug 2017 10:28:56 +0000 (12:28 +0200)]
generic: provide get_port_stats() on adm6996 switches

This patch provides a generic switch_dev_ops 'get_port_stats()' callback by
taping into the relevant port MIB counters.

This callback is used by swconfig_leds led trigger to blink LEDs with port
network traffic.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agogeneric: provide get_port_stats() on ar8xxx switches
Thibaut VARENE [Fri, 4 Aug 2017 10:28:23 +0000 (12:28 +0200)]
generic: provide get_port_stats() on ar8xxx switches

This patch provides a generic switch_dev_ops 'get_port_stats()' callback by
taping into the relevant port MIB counters.

The implementation uses a generic callback that select the correct MIB counter
index based on chip version.

This callback is used by swconfig_leds led trigger to blink LEDs with port
network traffic.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoramips: provide get_port_stats() on mt7530/762x switches
Thibaut VARENE [Fri, 4 Aug 2017 10:27:32 +0000 (12:27 +0200)]
ramips: provide get_port_stats() on mt7530/762x switches

This patch provides a generic switch_dev_ops 'get_port_stats()' callback by
taping into the relevant port MIB counters.

This callback is used by swconfig_leds led trigger to blink LEDs with port
network traffic.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agoprocd: mdns: Support txt values with spaces
Karl Palsson [Wed, 30 Aug 2017 17:44:00 +0000 (17:44 +0000)]
procd: mdns: Support txt values with spaces

Properly quote the arguments so that you can register a service with TXT
entries that contains spaces.

Example:
   procd_add_mdns myservice tcp 9999 "key=descriptive text field 1" \
         "another=something equally verbose"

Output before:
$ avahi-browse -r -v _myservice._tcp
_myservice._tcp      local
   hostname = [blah.local]
   address = [192.168.255.74]
   port = [9999]
   txt = ["verbose" "equally" "another=something" "1" "field" "text" "key=descriptive"]

Output now:
$ avahi-browse -r -v _myservice._tcp
_myservice._tcp      local
   hostname = [blah.local]
   address = [192.168.255.74]
   port = [9999]
   txt = ["another=something equally verbose" "key=descriptive text field 1"]

Signed-off-by: Karl Palsson <karlp@etactica.com>
7 years agoRevert "dropbear: Link ssh and scp command to /bin instead of /usr/bin"
John Crispin [Thu, 31 Aug 2017 19:09:05 +0000 (21:09 +0200)]
Revert "dropbear: Link ssh and scp command to /bin instead of /usr/bin"

This reverts commit f7528ed0a8586434e18e9007b1bf0d05a18d6418.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agokernel: update 4.4 to 4.4.85
Kevin Darbyshire-Bryant [Wed, 30 Aug 2017 20:09:17 +0000 (21:09 +0100)]
kernel: update 4.4 to 4.4.85

Refresh patches

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agoar71xx: fix switch port numbering on RB750r2 and RB750UPr2
João Chaínho [Thu, 31 Aug 2017 15:45:39 +0000 (16:45 +0100)]
ar71xx: fix switch port numbering on RB750r2 and RB750UPr2

This patch fixes the switch port numbering on Mikrotik RB750r2 (hEX lite) and RB750UPr2 (hEX PoE lite).
Tested on a RB750UPr2. Maybe this patch is applicable to other devices (e.g. RB951Ui-2nD, RB952Ui-5ac2nD) but I have no way to test them.

Signed-off-by: João Chaínho <joaochainho@gmail.com>
7 years agodropbear: Link ssh and scp command to /bin instead of /usr/bin
Rosen Penev [Wed, 30 Aug 2017 22:58:09 +0000 (15:58 -0700)]
dropbear: Link ssh and scp command to /bin instead of /usr/bin

ssh and scp commands interfere with OpenSSH when installed in /usr/bin .

One use case is when installing dropbear to get root access when only OpenSSH is available (OpenSSH disallows root password logins). Once dropbear installs, it replaces OpenSSH's executables, even when removed with opkg. OpenSSH must be reinstalled to get them back.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
7 years agomusl: update to 1.1.16+ git HEAD 2017-08-30
Koen Vandeputte [Thu, 31 Aug 2017 11:30:11 +0000 (13:30 +0200)]
musl: update to 1.1.16+ git HEAD 2017-08-30

Fixes critical issues for memset() & fflush()

Changes:

5f7efb8 move IPPORT_RESERVED from netdb.h to netinet/in.h
5f3b652 add powerpc64 and s390x to list of supported archs in INSTALL
file
9d4c902 fix undefined behavior in memset due to missing sequence points
c7f56b4 __init_libc: add fallbacks for __progname setup
cc08669 add SIOCGSTAMPNS socket ioctl macro to ioctl.h
02b50c9 fix mips ioctl macros to match linux asm/sockios.h
670d6d0 fix unsynchronized access to FILE structure in fflush(0)

Tested on cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agobusybox: update to 1.27.2
Magnus Kroken [Wed, 23 Aug 2017 21:13:34 +0000 (23:13 +0200)]
busybox: update to 1.27.2

Refresh patches, delete patches backported from upstream.

This fixes ntpd sync issues (ntpd would not sync if the first provided
peer address was unreachable).

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agouboot-envtools: Add support for IPQ806x AP148 and DB149
Ram Chandra Jangir [Wed, 28 Jun 2017 17:54:45 +0000 (23:24 +0530)]
uboot-envtools: Add support for IPQ806x AP148 and DB149

IPQ806x AP148 and DB149 boards didn't have the UCI ubootenv
section initialized, so the usage of fw_printenv required manual
configuration. With this change, the "fw_printenv" and "fw_setenv"
command will automatically work on NOR and NAND based platforms.

Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
7 years agobusybox: move passwd applet to /bin
Daniel Golle [Wed, 19 Jul 2017 21:53:35 +0000 (23:53 +0200)]
busybox: move passwd applet to /bin

busybox currently installs passwd into /usr/bin which prevents its
'full' shadow-utils variant from being installed.
Move the passwd applet to /bin to avoid that collision.
shadow also provides /usr/bin/login which doesn't collide with busybox
as the busybox login applet is installed at /bin/login.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7 years agobusybox: move traceroute applets to /bin
Daniel Golle [Wed, 19 Jul 2017 21:52:22 +0000 (23:52 +0200)]
busybox: move traceroute applets to /bin

busybox currently installs traceroute and traceroute6 into /usr/bin
which prevents their 'full' iputils variants from being installed.
Move those applets to /bin so they can coexist with their iputils
siblings using the same PATH convention already applied for coreutils
and other drop-in 'full' versions.
Refresh existing patch while at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7 years agosamba36: Remove syslog and load printers lines.
Rosen Penev [Sat, 26 Aug 2017 03:12:13 +0000 (20:12 -0700)]
samba36: Remove syslog and load printers lines.

printer support is removed using 200-remove_printer_support.patch. the syslog parameter requires samba to be compiled with --with-syslog. Currently samba does not log to syslog and probably has not for a long time.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
7 years agoscripts/dowload.pl: use glob to expand target dir
Zoltan Gyarmati [Sat, 26 Aug 2017 13:14:20 +0000 (15:14 +0200)]
scripts/dowload.pl: use glob to expand target dir

If CONFIG_DOWNLOAD_FOLDER is set to for example "~/dl", the download
script fails to create the .hash and .dl files with the following
errors:
 Cannot create file ~/dl/dropbear-2017.75.tar.bz2.dl: No such file or directory
 sh: 1: cannot create ~/dl/dropbear-2017.75.tar.bz2.hash: Directory nonexistent

If the tarball already exists in the ~/dl dir, it's properly found and
used, so this issue only affects the download.pl script.
 This patch calls glob() on the target dir parameter, which will expand `~`.

Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
7 years agomusl: bump to latest 1.1.16+ git HEAD
Koen Vandeputte [Tue, 22 Aug 2017 14:37:33 +0000 (16:37 +0200)]
musl: bump to latest 1.1.16+ git HEAD

Changes:

1698fe6 fix build failure for sh4a due to missing colon in asm statement
80bf595 trap UB from attempts to join a detached thread
e31c8c2 ppc64: fix setjmp/longjmp handling of TOC pointer
52cf5c1 qsort: add a short comment about the algorithm
dc2f368 disable global visibility override hack (vis.h) by default
947d330 add _NL_LOCALE_NAME extension to nl_langinfo
a08910f fix missing volatile qualifier on lock in __get_locale
2e6e084 remove ineffective compiler assist from printf
bc42dcb fix undefined behavior in ptrace
d906fa3 unify the use of FUTEX_PRIVATE
60ab365 fix undefined behavior in free
f688884 reapply va_arg hacks removal to wprintf
bd00cc8 remove useless declarations in string.h
f3055e0 allow specifying argv[0] when invoking a program via ldso
command
43c423a fix regression in dlopen promotion from RTLD_LOCAL to
RTLD_GLOBAL
66b53cf ldso: avoid spurious & possible erroneous work for libs with no
deps
94f7441 powerpc64: add single-instruction math functions
9d12a6a fix clang CFLAGS checks and silence unused argument warnings
ce385fc s390x: add single-instruction math functions
e6def54 fix arm run-time abi string functions
91d34c4 fix regression in getspnam[_r] error code for insufficient
buffer size
5948bc1 fix omission of microblaze user.h definitions
b7bfb5c fix iconv conversions for iso88592-iso885916
64f8558 handle errors from localtime_r in ctime_r
2d7d05f set errno when getpw*_r, getgr*_r, and getspnam_r fail
5c10c33 handle localtime errors in ctime
1c86c7f handle mremap failure in realloc of mmap-serviced allocations
1080008 getdate: correctly specify error number
af05173 catopen: set errno to EOPNOTSUPP
84eff79 fix glob failure to match plain "/" to root directory
bc313e8 use hard-coded sh4a atomic opcodes to avoid linker errors on sh
179766a towupper/towlower: fast path for ascii chars
1c49700 remove long-obsolete clang workarounds from mips* syscall_arch.h
files
4073f03 fix fstatat syscall on mips64
81f4a12 fix fchown fallback on arches without chown(2)
97bd6b0 fix iconv conversions to legacy 8bit encodings
f9f686b have posix_spawnattr_setflags check for supported flags
77e895d add no-op POSIX_SPAWN_USEVFORK to spawn.h
5555041 s390x: provide sigcontext struct definition
bb439bb implement new posix_spawn flag POSIX_SPAWN_SETSID
58e2396 remove va_arg hacks in printf core with undefined behavior
e1232f5 make ttyname[_r] return ENODEV rather than ENOENT
1a7fa5e fix regression in support for resolv.conf attempts option
8c44a06 fix scalbn when result is in the subnormal range
2577b1b allow full-range file offsets to mmap on archs with 64-bit
syscall args
b3751c3 fix dl_iterate_phdr in static PIE binaries
1ca5975 fix read past end of buffer in getaddrinfo backend
54807d4 aarch64: add single instruction math functions
b6e1fe0 fix strptime output for %C without %y
834ef7a fix processing of strptime %p format
85dfab7 fix off-by-one in strptime %j
9571c53 regex: fix newline matching with negated brackets
e6917ec increase limit on locale name length from 15 to 23 bytes
e4fc9ad search locale name variants for gettext translations
16319a5 make setlocale return a single name for LC_ALL if all categories
match
0c53178 fix dlopen/dlsym regression opening libs already loaded at
startup
dbff2bb fix POSIX-format TZ dst transition times for southern hemisphere
74bca42 s390x: fix fpreg_t and remove unused per_struct
a393d5c precalculate gnu hash rather than doing it lazily in find_sym
inner loop
8cba1dc fix threshold constants in j0f, y0f, j1f, y1f
cb52539 remove unused refcnt field for shared libraries
c49d3c8 avoid loading of multiple libc versions via explicit pathname
3ec8b3a fix one-byte overflow in legacy getpass function
733d1ea fix wide scanf's use of a compound literal past its lifetime
6a209f1 fix possible fd leak, unrestored cancellation state on dns
socket fail
500f5be in static dl_iterate_phdr, fix use of possibly-uninitialized aux
data
6582baa fix free of uninitialized buffer pointer on error in regexec
6476b81 emulate lazy relocation as deferrable relocation
4823b13 reorder addend handling before symbol lookup in relocation code
4ff234f rework ldso handling of global symbol table for consistency
c9783e4 treat STB_WEAK and STB_GNU_UNIQUE like STB_GLOBAL in find_sym
fc85fb3 fix ld-behavior-dependent crash in ppc64 ldso startup
827c4e6 fix lsearch and lfind to pass key as first arg to the compar
callback
0a4a16d allow page size to vary on arm
b261a24 fix build regression in arm atomics asm with new binutils
9201c3a s390x: implement dlsym
d6601f0 avoid unbounded strlen in gettext functions
dbbb373 fix use of uninitialized pointer in gettext core
01e6bbe fix bindtextdomain logic error deactivating other domains
6894f84 fix spurious EINTR errors from multithreaded set*id, etc.
1f53e7d fix crashes in x32 __tls_get_addr
27b3fd6 fix crash from corrupted tls module list after failed dlopen
809ff8c treat base 1 as an error in strtol-family functions
786fda8 fix getopt[_long] clobbering of optopt on success
150747b reduce impact of REG_* namespace pollution in x86[_64] signal.h

Tested on cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agosamba36: Don't resolve interfaces.
Rosen Penev [Thu, 24 Aug 2017 23:51:24 +0000 (16:51 -0700)]
samba36: Don't resolve interfaces.

It's redundant and also buggy. IPv6 link local addresses and ::1 are not resolved for example. Doesn't matter since lo and br-lan for example, resolve to them.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
7 years agosamba36: Remove guest ok since LuCI configures it.
Rosen Penev [Thu, 24 Aug 2017 23:51:23 +0000 (16:51 -0700)]
samba36: Remove guest ok since LuCI configures it.

guest ok is set per share and as such, don't override it. also, fix an error introduced in the last commit.

Signed-off-by: Rosen Penev <rosenp@gmail.com>
7 years agoramips: merge mt7628/mt7688 into mt76x8
L. D. Pinney [Sat, 26 Aug 2017 01:49:45 +0000 (09:49 +0800)]
ramips: merge mt7628/mt7688 into mt76x8

The ramips subtargets of mt7628 and mt7688 dts files all #include "mt7628an.dtsi"

They are essentially a single subtarget.

This patch merges the ramips subtargets mt7628 and mt7688 into a single subtarget mt76x8.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
7 years agokernel: update 4.9 to 4.9.45
Koen Vandeputte [Mon, 28 Aug 2017 11:37:07 +0000 (13:37 +0200)]
kernel: update 4.9 to 4.9.45

Refreshed all patches

Compiled & run-tested on targets: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agodnsmasq: forward.c: fix CVE-2017-13704
Kevin Darbyshire-Bryant [Tue, 29 Aug 2017 13:29:18 +0000 (14:29 +0100)]
dnsmasq: forward.c: fix CVE-2017-13704

Fix SIGSEGV in rfc1035.c answer_request() line 1228 where memset()
is called with header & limit pointing at the same address and thus
tries to clear memory from before the buffer begins.

answer_request() is called with an invalid edns packet size provided by
the client.  Ensure the udp_size provided by the client is bounded by
512 and configured maximum as per RFC 6891 6.2.3 "Values lower than 512
MUST be treated as equal to 512"

The client that exposed the problem provided a payload udp size of 0.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Acked-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agomediatek: various additional ethernet fixes
John Crispin [Wed, 30 Aug 2017 07:02:39 +0000 (09:02 +0200)]
mediatek: various additional ethernet fixes

* fixes default affinity
* adds a napi watchdog - we were seeing stalled TX queues
* adds up/down locking

Signed-off-by: John Crispin <john@phrozen.org>
7 years agonetifd: update to git HEAD version
Hans Dedecker [Tue, 29 Aug 2017 19:14:54 +0000 (21:14 +0200)]
netifd: update to git HEAD version

7d94ede system-linux: parse map-e fmrs parameters as nested data json object

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agomap: use nested json data object to store map-e fmrs parameters
Hans Dedecker [Sun, 27 Aug 2017 16:52:57 +0000 (18:52 +0200)]
map: use nested json data object to store map-e fmrs parameters

Replace the string array containing the fmrs parameters by a nested data
json object holding an array of fmrs parameters

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agolantiq: ACMP252: clean up device modules
Daniel Golle [Wed, 16 Aug 2017 11:06:13 +0000 (13:06 +0200)]
lantiq: ACMP252: clean up device modules

Install kmod-rt2800-pci instead of only the rt2x00 library.
Fixes missing wireless interface on AudioCodes AC-MP252.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7 years agolantiq: ltq-ptm: fix ADSL showtime handler
Daniel Golle [Wed, 16 Aug 2017 18:56:27 +0000 (20:56 +0200)]
lantiq: ltq-ptm: fix ADSL showtime handler

commit 2d6c7c2526b6 introduced a reference to g_xdata_addr which isn't
defined in that context. Use xdata_addr here instead.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
7 years agomap: fix boolean argument passed to blobmsg_check_attr in mapcalc
Hans Dedecker [Sat, 26 Aug 2017 07:21:52 +0000 (09:21 +0200)]
map: fix boolean argument passed to blobmsg_check_attr in mapcalc

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoconfig: make CONFIG_ALL_* select other CONIFG_ALL_* options
Hauke Mehrtens [Sat, 15 Jul 2017 20:54:33 +0000 (22:54 +0200)]
config: make CONFIG_ALL_* select other CONIFG_ALL_* options

Select the other CONFIG_ALL_* options in the hierarchy when the master
option is selected. Currently CONFIG_ALL_KMODS is not selected when the
build bot selects CONFIG_ALL_NONSHARED for example.

Now the rtc kmods should get build when CONFIG_ALL_KMODS,
CONFIG_ALL_NONSHARED or CONFIG_ALL and CONFIG_RTC_SUPPORT are selected
like it is done by the build bots for targets with rtc support.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: Jo-Philipp Wich <jo@mein.io>
7 years agolayerscape: do not add custom CFLAGS.
Hauke Mehrtens [Sat, 15 Jul 2017 20:52:52 +0000 (22:52 +0200)]
layerscape: do not add custom CFLAGS.

The selected CFLAGS are already set by default.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobrcm2708: bcm2710: do not activate neon-vfpv4 manually
Hauke Mehrtens [Sat, 15 Jul 2017 20:52:21 +0000 (22:52 +0200)]
brcm2708: bcm2710: do not activate neon-vfpv4 manually

Neon and vfpv4 support are activated by GCC on all ARMv8 CPUs because
this is now a mandatory part of the architecture. There is not need to
activate is manually.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agobrcm63xx: Add Comtrend AR-5315u support
Daniel Gonzalez Cabanelas [Sat, 12 Aug 2017 10:40:22 +0000 (12:40 +0200)]
brcm63xx: Add Comtrend AR-5315u support

Add support for the Comtrend AR-5315u router

This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash,
with an onboard BCM43217 wifi, 4 ethernet ports and 1
USB host port

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: refreshed patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
7 years agodnsmasq: fix indentation
Hans Dedecker [Fri, 25 Aug 2017 12:21:48 +0000 (14:21 +0200)]
dnsmasq: fix indentation

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agodnsmasq: add support for multiple tags for each host.
Kuang Rufan [Fri, 25 Aug 2017 06:10:21 +0000 (14:10 +0800)]
dnsmasq: add support for multiple tags for each host.

Currently, dnsmasq support assigning multiple tags to a host record
(--dhcp-host), but we only support only 1 tag for a host. The commit
makes the following config to be valid:

  config host
      option name 'computer'
      option mac '00:11:22:33:44:55'
      option ip '192.168.1.100'
      list tag 'vendor_class'
      list tag 'vendor_id'

  config tag 'vendor_class'
      list dhcp_option 'option:vendor-class,00:...<omitted>'

  config tag 'vendor_id'
      option force '1'
      list dhcp_option 'option:vendor-id-encap,00:...<omitted>'

Signed-off-by: Kuang Rufan <kuangrufan@pset.suntec.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agof2fs-tools: fix mkfs.f2fs on big-endian systems
Stijn Tintel [Thu, 24 Aug 2017 07:04:15 +0000 (10:04 +0300)]
f2fs-tools: fix mkfs.f2fs on big-endian systems

Fixes: FS#749

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agof2fs-tools: drop musl compat patch
Stijn Tintel [Thu, 24 Aug 2017 06:56:49 +0000 (09:56 +0300)]
f2fs-tools: drop musl compat patch

It is no longer needed since version 1.4.1.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agof2fs-tools: drop patch in favour of CONFIGURE_VARS
Stijn Tintel [Thu, 24 Aug 2017 06:23:32 +0000 (09:23 +0300)]
f2fs-tools: drop patch in favour of CONFIGURE_VARS

Override the failing check in configure with CONFIGURE_VARS instead of
carrying a patch that's unlikely to be accepted by upstream.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Acked-by: John Crispin <john@phrozen.org>
7 years agomap: add ealen as configurable uci parameter
Hans Dedecker [Thu, 24 Aug 2017 18:53:36 +0000 (20:53 +0200)]
map: add ealen as configurable uci parameter

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: refresh kernel patches
John Crispin [Thu, 24 Aug 2017 08:09:46 +0000 (10:09 +0200)]
ramips: refresh kernel patches

the reordering patch fixes random kernel hangs. bug/fix was reported by MTK/WCN.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoipq806x: Archer C2600: fix switch ports numbering
Baptiste Jonglez [Wed, 23 Aug 2017 21:44:52 +0000 (23:44 +0200)]
ipq806x: Archer C2600: fix switch ports numbering

The order of LAN ports shown in Luci is reversed compared to what is
written on the case of the device.  Fix the order so that they match.

Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
7 years agoxtables-addons: update to version 2.13
Koen Vandeputte [Tue, 22 Aug 2017 14:37:32 +0000 (16:37 +0200)]
xtables-addons: update to version 2.13

Changes:

89d1b80 xt_condition: namespace support #2
c839e87 xt_geoip: check for allocation overflow
a587f95 compat_xtables: use more accurate printf format for NIPQUAD
1874fcd xt_DNETMAP: fix a buffer overflow
21ea7b7 xt_LOGMARK: resolve new gcc7 warnings
ee8da2b build: support for Linux 4.12
19a4359 xt_condition: add support for namespaces
1b37966 xt_psd: resolve compiler warning

Tested on cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoramips: make mt7621 select WEAK_REORDERING_BEYOND_LLSC
John Crispin [Thu, 24 Aug 2017 06:32:54 +0000 (08:32 +0200)]
ramips: make mt7621 select WEAK_REORDERING_BEYOND_LLSC

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoRevert "iputils: switch to new upstream"
John Crispin [Thu, 24 Aug 2017 06:08:42 +0000 (08:08 +0200)]
Revert "iputils: switch to new upstream"

This reverts commit 77d3ac8e3ecd7989a7cffb575c4a42bc68190b6c.
This reverts commit e665b3df2a47ba5bb049d13358937ac67b860b70.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoiperf3: add SSL variant for iperf_auth feature
Philip Prindeville [Tue, 1 Aug 2017 20:04:55 +0000 (14:04 -0600)]
iperf3: add SSL variant for iperf_auth feature

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoiperf3: update to 3.2
Philip Prindeville [Mon, 31 Jul 2017 00:59:50 +0000 (18:59 -0600)]
iperf3: update to 3.2

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoiputils: update sha256sum
John Crispin [Wed, 23 Aug 2017 17:34:24 +0000 (19:34 +0200)]
iputils: update sha256sum

Signed-off-by: John Crispin <john@phrozen.org>
7 years agotools: patch various gnu tools for macOS 10.13
Ryan Mounce [Thu, 3 Aug 2017 11:07:58 +0000 (20:37 +0930)]
tools: patch various gnu tools for macOS 10.13

These host tools compile but may crash at runtime when building on
macOS 10.13 (High Sierra). Backport upstream gnulib patch until new
releases of affected tools.

https://lists.gnu.org/archive/html/bug-gnulib/2017-07/msg00056.html
https://git.savannah.gnu.org/cgit/gnulib.git/commit/?id=c41f233c4c38e84023a16339782ee306f03e7f59

Signed-off-by: Ryan Mounce <ryan@mounce.com.au>
7 years agorules.mk: add missing CPP definition
BangLang Huang [Mon, 14 Aug 2017 04:49:10 +0000 (12:49 +0800)]
rules.mk: add missing CPP definition

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agoutil-linux: don't need to build NLS support
Philip Prindeville [Mon, 21 Aug 2017 20:09:57 +0000 (14:09 -0600)]
util-linux: don't need to build NLS support

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoath10k-firmware: update qca9887 firmware to 10.2.4-1.0-00029
Andreas Ziegler [Sun, 6 Aug 2017 19:57:46 +0000 (21:57 +0200)]
ath10k-firmware: update qca9887 firmware to 10.2.4-1.0-00029

Signed-off-by: Andreas Ziegler <github@andreas-ziegler.de>
7 years agoiputils: switch to new upstream
John Crispin [Wed, 23 Aug 2017 14:31:35 +0000 (16:31 +0200)]
iputils: switch to new upstream

Signed-off-by: John Crispin <john@phrozen.org>
7 years agotools/mkimage: fix musl build
Marty Plummer [Fri, 11 Aug 2017 07:11:39 +0000 (02:11 -0500)]
tools/mkimage: fix musl build

Taken from: http://git.denx.de/?p=u-boot.git;a=commit;h=26e355d131a6b56ea78a156c1cee4f6ba0500b37

Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
7 years agoramips: set ethernet mac address for VoCore2
L. D. Pinney [Sat, 12 Aug 2017 14:04:27 +0000 (22:04 +0800)]
ramips: set ethernet mac address for VoCore2

This patch sets the mac address for the VoCore2 devices.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
7 years agosamba36-net: new package
Ansuel Smith [Sun, 13 Aug 2017 18:36:56 +0000 (20:36 +0200)]
samba36-net: new package

Samba could also be usefull for sending commands to windows pc (like shoutdown command). This new package add the bin to include this kind of command to the samba package.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
7 years agoramips: add Xiaomi Mi Router 3G support
Pavel Kubelun [Sat, 12 Aug 2017 14:56:11 +0000 (17:56 +0300)]
ramips: add Xiaomi Mi Router 3G support

This commit adds support for Xiaomi Mi WiFi Router 3G.

Short specification:
 - MT7621AT + MT7603EN + 7612EN
 - 256MB DDR3 RAM
 - 128MB NAND flash
 - 1+2 x 1000M Ethernet
 - 1x USB 3.0 port
 - reset button
 - yellow, blue, red leds

Installation through telnet/ssh:
- copy lede-ramips-mt7621-mir3g-squashfs-kernel1.bin and
lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin to usb disk or wget it
from LEDE download site to /tmp
- switch to /extdisks/sda1/ (if copied to USB drive) or to /tmp if
wgetted from LEDE download site
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-kernel1.bin kernel1
- run: mtd write lede-ramips-mt7621-mir3g-squashfs-rootfs0.bin rootfs0
- run: mtd erase kernel0
- run: reboot

Originally stock firmware has following partitions:
 - ...
 - kernel0 (primary kernel image)
 - kernel1 (secondary kernel image, used by u-boot in failsafe routine)
 - rootfs0 (primary rootfs)
 - rootfs1 (secondary rootfs in case primary fails)
 - overlay (used as ubi overlay)

This commit squashes rootfs0, rootfs1 and overlay partitions into 1, so
it can be used by LEDE fully for package installation, resulting in 117,5MiB.

This device lacks hw watchdog, so adding softdog instead (stock does the same).

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
7 years agoutil-linux: add missing dependencies
Jo-Philipp Wich [Wed, 23 Aug 2017 09:31:09 +0000 (11:31 +0200)]
util-linux: add missing dependencies

Commit e505f59bd9 "utils/util-linux: Update to 2.30.1" bumped util-linux
without properly adjusting the dependencies of all applets.

Add missing ncursesw dependencies to sfdisk and dmesg applets to fix
packaging issues.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoiwinfo: update to the latest git HEAD
Rafał Miłecki [Wed, 23 Aug 2017 09:18:04 +0000 (11:18 +0200)]
iwinfo: update to the latest git HEAD

c1a03e8 nl80211: request split information about frequencies
5638567 nl80211: store info about freq being not available for some bandwidths
ce51cb8 Allow storing more info about each frequency
5c10efa nl80211: support receiving split frequencies
335967c nl80211: improve error handling
ab089dd nl80211: propagate netlink errors to callers
7bba117 nl80211: handle netlink errors in nl80211_wait()
d22c64c iwinfo: add device id for Ubiquiti NanoStation Loco M2

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoRevert "busybox: ash/hush fix for read-builtin command"
Jo-Philipp Wich [Wed, 23 Aug 2017 08:56:53 +0000 (10:56 +0200)]
Revert "busybox: ash/hush fix for read-builtin command"

Revert this commit as it introduces a patchfile at a wrong location.
Since the patch was never effective, we can assume that this particular
commit was not properly tested.

This reverts commit dde9da46c1586c0bda54e7fa6de05f0fc76e557a.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
7 years agoRevert "xtables-addons: fix nathelper-rtsp dependencies"
John Crispin [Wed, 23 Aug 2017 07:54:47 +0000 (09:54 +0200)]
Revert "xtables-addons: fix nathelper-rtsp dependencies"

This reverts commit e2ef80130e0c855df47b2e046aed2b3467845184.

Signed-off-by: John Crispin <john@phrozen.org>
7 years agomediatek: drop kernel dep on userland module
John Crispin [Wed, 23 Aug 2017 07:54:26 +0000 (09:54 +0200)]
mediatek: drop kernel dep on userland module

Signed-off-by: John Crispin <john@phrozen.org>
7 years agoxtables-addons: fix nathelper-rtsp dependencies
Philip Prindeville [Tue, 22 Aug 2017 16:13:00 +0000 (10:13 -0600)]
xtables-addons: fix nathelper-rtsp dependencies

Both nf_conntrack and nf_nat need to be called out.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
7 years agoprocd: update to latest git HEAD
John Crispin [Tue, 22 Aug 2017 14:47:18 +0000 (16:47 +0200)]
procd: update to latest git HEAD

54b46a3 procd: send ubus notify when a config file has changed

Signed-off-by: John Crispin <john@phrozen.org>
7 years agodnsmasq: add ubus notifications for new leases
John Crispin [Tue, 22 Aug 2017 14:43:02 +0000 (16:43 +0200)]
dnsmasq: add ubus notifications for new leases

Signed-off-by: John Crispin <john@phrozen.org>
7 years agohostapd: add additional ubus notifications
John Crispin [Tue, 22 Aug 2017 14:33:40 +0000 (16:33 +0200)]
hostapd: add additional ubus notifications

Signed-off-by: John Crispin <john@phrozen.org>
7 years agonvram: add help message for nvram magic not found
BangLang Huang [Fri, 24 Feb 2017 02:58:09 +0000 (10:58 +0800)]
nvram: add help message for nvram magic not found

The program would failed if nvram magic not found
in specific partition.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: improve argument check when program start
BangLang Huang [Fri, 24 Feb 2017 02:52:52 +0000 (10:52 +0800)]
nvram: improve argument check when program start

print help message when argument count is less
than 2.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: add usage() function
BangLang Huang [Fri, 24 Feb 2017 02:45:16 +0000 (10:45 +0800)]
nvram: add usage() function

Merge the help message into a single function,
so that we can use it somewhere else.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonvram: fix memory leak
BangLang Huang [Fri, 24 Feb 2017 02:16:17 +0000 (10:16 +0800)]
nvram: fix memory leak

Fix memory leak on nvram_open() and nvram_open_rdonly().

For nvram_open(), the 'fd' should be closed on error, and
mmap_area should be unmap when nvram magic can not be found.

For nvram_open_rdonly(), the 'file' variable should free before
return. Once nvram_find_mtd() return successfully, it will allocate
memory to save mtd device string.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
7 years agonetifd: update to latest git HEAD
John Crispin [Tue, 22 Aug 2017 07:12:56 +0000 (09:12 +0200)]
netifd: update to latest git HEAD

b5731bf allow setting rps/xps defualt values via uci
2a29d1a system: remove unused 6rd tunnel attributes
e627542 netifd: allow negative neighlocktime values
e41382c system-linux: parse ipv6 specific tunnel settings as nested data json object

Signed-off-by: John Crispin <john@phrozen.org>
7 years agogpio-button-hotplug: leave platform_device.dev.platform_data untouched
Furong Xu [Thu, 2 Mar 2017 09:00:32 +0000 (17:00 +0800)]
gpio-button-hotplug: leave platform_device.dev.platform_data untouched

get platform_data from gpio_keys_button_dev.pdata, and fix a illegal pointer
dereference like this:

[   51.143776] gpio-keys-polled gpio-keys-polled: missing poll_interval value
[   51.150852] gpio-keys-polled: probe of gpio-keys-polled failed with error -22
[  828.159993] gpio-keys-polled gpio-keys-polled: no memory for button data
[  828.166821] gpio-keys-polled: probe of gpio-keys-polled failed with error -12

Signed-off-by: Furong Xu <xfr@outlook.com>
7 years agoutils/util-linux: Update to 2.30.1
Daniel Engberg [Tue, 11 Jul 2017 09:07:51 +0000 (11:07 +0200)]
utils/util-linux: Update to 2.30.1

Refresh patch

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agouboot-lantiq: Enable TFTP PUT support for backups
Carl-Daniel Hailfinger [Sat, 12 Aug 2017 17:04:52 +0000 (19:04 +0200)]
uboot-lantiq: Enable TFTP PUT support for backups

Backing up the current firmware from U-Boot over serial can take hours.
Booting a working Linux image for backup purposes is not always an option.
Using the tftpput command in U-Boot is the fastest and easiest way.

tftpput will upload the contents of a memory region to the TFTP server.
The IP address of the server is stored in the serverip variable.

Usage:
tftpput <memaddr> <length> <filename>

Example for a complete flash backup of an o2 Box 6431 (VGV7510KW22):
VGV7510KW22 # tftpput 0xB0000000 0x1000000 o2boxbackup.bin

Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net>
7 years agoimx6: add driver for temp/voltage monitoring
Koen Vandeputte [Thu, 17 Aug 2017 12:22:06 +0000 (14:22 +0200)]
imx6: add driver for temp/voltage monitoring

The Gateworks System Controller (GSC) mimics a standard AD7418 device on
I2C bus 0 at slave 0x29.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoimx6: refresh kernel config
Koen Vandeputte [Thu, 17 Aug 2017 12:22:05 +0000 (14:22 +0200)]
imx6: refresh kernel config

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
7 years agoca-certificates: Update to 20170717
Christian Schoenebeck [Tue, 15 Aug 2017 18:44:17 +0000 (20:44 +0200)]
ca-certificates: Update to 20170717

Update to 20170717

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>
7 years agoprocd: fix hotplug.json syntax
Florian Eckert [Fri, 18 Aug 2017 13:06:25 +0000 (15:06 +0200)]
procd: fix hotplug.json syntax

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agoprocd: fix hotplug-preinit.json syntax
Florian Eckert [Fri, 18 Aug 2017 13:06:04 +0000 (15:06 +0200)]
procd: fix hotplug-preinit.json syntax

Signed-off-by: Florian Eckert <fe@dev.tdt.de>
7 years agomediatek: update to latest kernel patchset from v4.13-rc
John Crispin [Fri, 18 Aug 2017 16:11:52 +0000 (18:11 +0200)]
mediatek: update to latest kernel patchset from v4.13-rc

Signed-off-by: Muciri Gatimu <muciri@openmesh.com>
Signed-off-by: Shashidhar Lakkavalli <shashidhar.lakkavalli@openmesh.com>
Signed-off-by: John Crispin <john@phrozen.org>
7 years agokernel: update 4.4 to 4.4.83
Kevin Darbyshire-Bryant [Thu, 17 Aug 2017 12:21:21 +0000 (13:21 +0100)]
kernel: update 4.4 to 4.4.83

Refresh patches.
Minor update 704-phy-no-genphy-soft-reset.patch which was partially
accepted upstream.
Compile-tested on ar71xx.
Runtime-tested on ar71xx.

Fixes the following vulnerabilities:
- CVE-2017-7533 (4.4.80)
- CVE-2017-1000111 (4.4.82)
- CVE-2017-1000112 (4.4.82)

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
[cleanup commit message, add compile/runtime tested]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agokernel: update 4.9 to 4.9.44
Stijn Tintel [Thu, 17 Aug 2017 08:51:05 +0000 (10:51 +0200)]
kernel: update 4.9 to 4.9.44

Refresh patches.
Adapt 704-phy-no-genphy-soft-reset.patch.
Remove brcm2708/950-0005-mm-Remove-the-PFN-busy-warning.patch.
Compile-tested on brcm2708/bcm2708 and x86/64.
Runtime-tested on brcm2708/bcm2708 and x86/64.

Fixes the following vulnerabilities:
- CVE-2017-7533
- CVE-2017-1000111
- CVE-2017-1000112

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobcm53xx: backport DTS commits that setup USB LEDs
Rafał Miłecki [Thu, 17 Aug 2017 07:43:37 +0000 (09:43 +0200)]
bcm53xx: backport DTS commits that setup USB LEDs

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoodhcpd: update to latest git HEAD
Hans Dedecker [Wed, 16 Aug 2017 19:19:47 +0000 (21:19 +0200)]
odhcpd: update to latest git HEAD

94e65ee ndp: use IPv4 address list when comparing IPv4 addresses
ff5020d dhcpv6-ia: rework reconfigure accept logic

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: add support for the VoCore2 Lite
L. D. Pinney [Thu, 3 Aug 2017 20:09:06 +0000 (04:09 +0800)]
ramips: add support for the VoCore2 Lite

The VoCore2 Lite uses the same PCB as the Vocore2.
This patch moves the common VoCore2 parts into dtsi.

Removed memory node in the device tree source file.
Memory is detected automatically.

http://vocore.io/
http://vonger.net/
http://vonger.cn/

Specifications:
- SoC: MediaTek MT7688AN
- RAM: 64MB DDR2 EtronTech EM68B16CWQH-25H
- Flash: 8MB NOR SPI Flash GigaDevice GD25Q64CWIG
- Wireless: Built into MT7688AN with onboard IPEX connector

Firmware installation:
- VoCore2-Lite ships with firmware forked from OpenWrt.
- Installation from the bootloader is recommended.
- If using luci/sysupgrade use the -n option (do not keep settings)
  original firmware uses a modified proprietary MediaTek wireless driver.
- The wireless is disabled by default in LEDE.
- If reverting to factory firmware using the bootloader is recommended.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Tested by: Noble Pepper <noblepepper@gmail.com>

7 years agoramips: fix WHR-1166D WAN port
Mathias Kresin [Wed, 9 Aug 2017 18:17:43 +0000 (20:17 +0200)]
ramips: fix WHR-1166D WAN port

By adding the ICPlus IP1001 phy driver an already set RGMII delay mode
is reset during driver load.

Set the rgmii rx delay to fix corrupt/no packages in case the WAN port
negotiates to 1000MBit.

Fixes: FS#670

Signed-off-by: Mathias Kresin <dev@kresin.me>
7 years agowpa_supplicant: log to syslog instead of stdout
Stijn Tintel [Tue, 8 Aug 2017 05:56:06 +0000 (07:56 +0200)]
wpa_supplicant: log to syslog instead of stdout

While debugging an issue with a client device, wpa_supplicant did not
seem to log anything at all. Make wpa_supplicant log to syslog instead
of stdout, to make debugging easier and to be consistent with hostapd.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobrcm2708-gpu-fw: update to latest version
Stijn Tintel [Tue, 8 Aug 2017 05:07:12 +0000 (07:07 +0200)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
7 years agobase-files: drop unused preinit_echo function
Rafał Miłecki [Mon, 7 Aug 2017 06:41:26 +0000 (08:41 +0200)]
base-files: drop unused preinit_echo function

It isn't used for years since the old 99_10_run_init has been dropped.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agonftables: remove date from version
Hauke Mehrtens [Wed, 9 Aug 2017 21:08:48 +0000 (23:08 +0200)]
nftables: remove date from version

We are using the normal 0.7 version of nftables, do not add an
additional date to the version number.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
7 years agotools/pkg-config: Update to 0.29.2
Daniel Engberg [Tue, 8 Aug 2017 06:14:28 +0000 (08:14 +0200)]
tools/pkg-config: Update to 0.29.2

* Update pkg-config to 0.29.2
* Remove patch as it's upstreamed

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agotools/expat: Update to 2.2.3
Daniel Engberg [Mon, 7 Aug 2017 03:00:46 +0000 (05:00 +0200)]
tools/expat: Update to 2.2.3

Update (lib)expat to 2.2.3
Remove poor entropy hack, 2.2.3 uses /dev/urandom in worst case

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agoutils/e2fsprogs: Update to 1.43.5
Daniel Engberg [Mon, 7 Aug 2017 02:44:27 +0000 (04:44 +0200)]
utils/e2fsprogs: Update to 1.43.5

Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agotools/e2fsprogs: Update to 1.43.5
Daniel Engberg [Mon, 7 Aug 2017 02:42:21 +0000 (04:42 +0200)]
tools/e2fsprogs: Update to 1.43.5

Update e2fsprogs to 1.43.5

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
7 years agolantiq: fix missing otg_cap on danube platform
Daniel Gonzalez Cabanelas [Sat, 29 Jul 2017 12:54:15 +0000 (14:54 +0200)]
lantiq: fix missing otg_cap on danube platform

USB doesn't work in some danube boards because otg_cap
is missing since previous changes made on the USB-dwc2
lantiq driver. Fix it.

Tested on the ARV7518PW router.

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
7 years agobase-files: don't setup network in preinit if failsafe is disabled
Rafał Miłecki [Mon, 7 Aug 2017 09:09:33 +0000 (11:09 +0200)]
base-files: don't setup network in preinit if failsafe is disabled

With failsafe disabled there is no point in early network setup. We
don't send announcement over UDP and there is no way to ssh to the
device.

A side effect of this is avoiding a possibly incorrect network config
(only with failsafe disabled). This problem is related to possible
changes made by user in /etc/config/network.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
7 years agoprocd: update to the latest git HEAD
Hans Dedecker [Tue, 8 Aug 2017 12:50:36 +0000 (14:50 +0200)]
procd: update to the latest git HEAD

a17e1e8 watchdog: fix inline watchdog_get_magicclose function prototype

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
7 years agoramips: ArcherC50v1: fix wlan2g MAC address
Thibaut VARENE [Fri, 4 Aug 2017 15:22:03 +0000 (17:22 +0200)]
ramips: ArcherC50v1: fix wlan2g MAC address

By default the wlan eprom contains the generic ralink MAC which is not
the vendor (TP-Link) one. Based on OFW bootlog, it appears that addresses
are decremented from the ethernet MAC.

This patch fixes the MAC address for wlan2g in line with OFW.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
7 years agolantiq: board.d: use auto xfer_mode as default
Martin Schiller [Thu, 3 Aug 2017 06:37:53 +0000 (08:37 +0200)]
lantiq: board.d: use auto xfer_mode as default

If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>
7 years agoltq-vdsl-app: add support for auto xfer_mode and auto line_mode
Martin Schiller [Thu, 3 Aug 2017 07:55:00 +0000 (09:55 +0200)]
ltq-vdsl-app: add support for auto xfer_mode and auto line_mode

If xfer_mode is set to auto the vdsl_cpe_control daemon assumes that
ATM should be used for ADSL and PTM for VDSL.

xfer_mode and line_mode can be set to fixed value independantly from
each other.

The syntax for the tc_layer argument of vdsl_cpe_control is as follow:

-T<TcADSL>:<TcCfgUsADSL>:<TcCfgDsADSL>_<TcVDSL>:<TcCfgUsVDSL>:<TcCfgDsVDSL>

where TcADSL and TcVDSL can be: 1=ATM, 2=PTM/EFM, 4=Auto TC-Layer

and TcCfgUsADSL, TcCfgUsVDSL, TcCfgDsADSL, TcCfgDsVDSL can be:
1=64/65-octet encapsulation supported
2=64/65-octet encapsulation with pre-emption
3=64/65-octet encapsulation with short packets

Default: In case of no '-T' option is given, ADSL will be configured
in ATM and VDSL in PTM/EFM: -T1:0x1:0x1_2:0x1:0x1

The '-M' argument of dsl_cpe_control defines the initial DSL mode
(NextMode) for ADSL/VDSL multimode handling.

Possible Values: 0=API-default, 1=ADSL, 2=VDSL

Default: In case of no '-M' option is given, '0' (API-default) will
be selected.

Signed-off-by: Martin Schiller <ms@dev.tdt.de>