oweals/u-boot.git
5 years agomisc: fs_loader: Replace label with DT phandle
Tien Fong Chee [Tue, 5 Mar 2019 15:29:38 +0000 (23:29 +0800)]
misc: fs_loader: Replace label with DT phandle

In previously label which will be expanded to the node's full path was
used, and now replacing label with most commonly used DT phandle. The
codes were changed accordingly to the use of DT phandle and supporting
multiple instances.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoarm: fix hvc call
Ibai Erkiaga [Mon, 25 Feb 2019 10:11:45 +0000 (10:11 +0000)]
arm: fix hvc call

HVC call makes use of 6 mandatory arguments rather than 7 in the same way
as SMC calls. The 7th argument is optional (Client ID) for both HVC and
SMC but is implemented as 16-bit parameter and register R7 or W7. The aim
of this patch is just fix compilation error due to an invalid asm code in
the HVC call so that's why the 7th argument is removed.

The issue does not report any error in a normal build as hvc_call is not
used at all and is optimized by the compiler. Using -O0 triggers the
error so the patch is intended to fix issues on a ongoing effor to build
U-Boot with -O0.

Signed-off-by: Ibai Erkiaga <ibai.erkiaga-elorza@xilinx.com>
5 years agoSupport boot Android image without address on bootm command
Shawn Guo [Fri, 22 Feb 2019 08:28:06 +0000 (16:28 +0800)]
Support boot Android image without address on bootm command

It works perfectly fine to boot an Android boot.img with bootm command
followed by an explicit address argument that holds the image.  But if
we have boot.img downloaded into default 'loadaddr', and then boot it
using bootm command without the address argument, we will run into
problem, because U-Boot fails to find ramdisk and fdt (second area) in
boot.img.

The current Android image support assumes there is always an address
argument on bootm command.  However just like booting any other images,
'loadaddr' should be used when address argument is missing from bootm
command.  It patches boot_get_ramdisk() and boot_get_fdt() a bit to
support this quite common usage of bootm command for Android image.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
5 years agocmd: ximg.c: Add support for getting external data address and length
Tien Fong Chee [Tue, 12 Feb 2019 12:49:30 +0000 (20:49 +0800)]
cmd: ximg.c: Add support for getting external data address and length

This function supports getting both data address and length for
existing FIT subimage and FIT external data.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoARMv8: Disable fwcall when PSCI is enabled
Ang, Chee Hong [Tue, 12 Feb 2019 08:27:03 +0000 (00:27 -0800)]
ARMv8: Disable fwcall when PSCI is enabled

When PSCI is enabled, we are expecting U-Boot which now act
as EL3 software will handle all the PSCI calls. We won't need
fwcall as no further HVC or SMC are needed.

Signed-off-by: Ang, Chee Hong <chee.hong.ang@intel.com>
5 years agoARMv8: Allow SiP service extensions on top of PSCI code
Chee Hong Ang [Tue, 12 Feb 2019 08:27:02 +0000 (00:27 -0800)]
ARMv8: Allow SiP service extensions on top of PSCI code

Allow PSCI layer to handle any SiP service functions added by
platform vendors. PSCI layer will look for SiP service function
in the SiP function table located in '._secure_svc_tbl_entries'
section if the SMC function identifier is not found in the PSCI
standard functions table. Use DECLARE_SECURE_SVC macro to declare
and add platform specific SiP service function.
This new section '._secure_svc_tbl_entries' is located next to
'._secure.text' section. Refer to arch/arm/cpu/armv8/u-boot.lds.

Signed-off-by: Chee Hong Ang <chee.hong.ang@intel.com>
5 years agotest: call hexdump tests via `ut lib`
Heinrich Schuchardt [Mon, 11 Feb 2019 17:29:24 +0000 (18:29 +0100)]
test: call hexdump tests via `ut lib`

The unit tests in test/lib/hexdump.c are not related to the device tree.
So they should be executed via `ut lib` and not via `ut dm`.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agomisc: fs_loader: Add support for initializing block device
Tien Fong Chee [Thu, 31 Jan 2019 11:34:13 +0000 (19:34 +0800)]
misc: fs_loader: Add support for initializing block device

Firmware loader would encounter problem if the block device is accessed
before initializing it. This patch would adding the support of probing
block device and initializing block before the block device is accessed by
firmware loader.

Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
5 years agocmd: add exception command
Heinrich Schuchardt [Wed, 26 Dec 2018 16:20:35 +0000 (17:20 +0100)]
cmd: add exception command

The 'exception' command allows to test exception handling.

This implementation supports ARM, x86, RISC-V and the following exceptions:
* 'breakpoint' - prefetch abort exception (ARM 32bit only)
* 'unaligned'  - data abort exception (ARM only)
* 'undefined'  - undefined instruction exception

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
5 years agobcm963158: add nand support
Philippe Reynes [Fri, 15 Mar 2019 14:14:47 +0000 (15:14 +0100)]
bcm963158: add nand support

Enable the nand support (driver and command)
in the configuration of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodt: bcm963158: enable nand controller
Philippe Reynes [Fri, 15 Mar 2019 14:14:46 +0000 (15:14 +0100)]
dt: bcm963158: enable nand controller

Enable the nand controller in the device tree
of the board bcm963158.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodt: bcm63158: add nand controller
Philippe Reynes [Fri, 15 Mar 2019 14:14:45 +0000 (15:14 +0100)]
dt: bcm63158: add nand controller

Add the nand controller in the bcm63158 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agobcm968580xref: add nand support
Philippe Reynes [Fri, 15 Mar 2019 14:14:44 +0000 (15:14 +0100)]
bcm968580xref: add nand support

Enable the nand support (driver and command)
in the configuration of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodt: bcm968580xref: enable nand controller
Philippe Reynes [Fri, 15 Mar 2019 14:14:43 +0000 (15:14 +0100)]
dt: bcm968580xref: enable nand controller

Enable the nand controller in the device tree
of the board bcm968580xref.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodt: bcm6858: add nand controller
Philippe Reynes [Fri, 15 Mar 2019 14:14:42 +0000 (15:14 +0100)]
dt: bcm6858: add nand controller

Add the nand controller in the bcm6858 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agobcm968380gerg: add nand support
Philippe Reynes [Fri, 15 Mar 2019 14:14:41 +0000 (15:14 +0100)]
bcm968380gerg: add nand support

Enable the nand support (driver and command)
in the configuration of the board bcm96838gerg.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodt: bcm968380gerg: enable nand controller
Philippe Reynes [Fri, 15 Mar 2019 14:14:40 +0000 (15:14 +0100)]
dt: bcm968380gerg: enable nand controller

Enable the nand controller in the device tree
of the board bcm96838gerg.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodt: bcm6838: add nand controller
Philippe Reynes [Fri, 15 Mar 2019 14:14:39 +0000 (15:14 +0100)]
dt: bcm6838: add nand controller

Add the nand controller in the bcm6838 device tree.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodrivers: nand: brcmnand: add an option to read the write-protect from device tree
Philippe Reynes [Fri, 15 Mar 2019 14:14:38 +0000 (15:14 +0100)]
drivers: nand: brcmnand: add an option to read the write-protect from device tree

The option write-protect may only change on the kernel command line,
we add a property in the device tree to be more flexible.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodrivers: nand: brcmnand: add parameter parameter-page-big-endian
Philippe Reynes [Fri, 15 Mar 2019 14:14:37 +0000 (15:14 +0100)]
drivers: nand: brcmnand: add parameter parameter-page-big-endian

The parameter page isn't always in big endian, so we add
an option to choose the endiannes of the parameter page.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agodrivers: nand: brcmnand: add initial support
Philippe Reynes [Fri, 15 Mar 2019 14:14:36 +0000 (15:14 +0100)]
drivers: nand: brcmnand: add initial support

The driver brcmnand come from linux kernel 4.18.
Only SoC bcm6838 and bcm6858 are supported.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agocompat linux: import completion from linux 4.18
Philippe Reynes [Fri, 15 Mar 2019 14:14:35 +0000 (15:14 +0100)]
compat linux: import completion from linux 4.18

This patch port the file include/linux/completion.h
from linux 4.18 to u-boot. It define the structure
but all the function are stubbed.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agoinclude: linux: io: define devm_ioremap on board with ioremap
Philippe Reynes [Fri, 15 Mar 2019 14:14:34 +0000 (15:14 +0100)]
include: linux: io: define devm_ioremap on board with ioremap

The macro devm_ioremap is only defined for configuration
that doesn't have ioremap. But this macro may also be
defined on configuration with ioremap.
This patch remove the condition for the macro devm_ioremap,
so it's always defined.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agoarm: asm: io.h: define readX_relaxed and writeX_relaxed
Philippe Reynes [Fri, 15 Mar 2019 14:14:33 +0000 (15:14 +0100)]
arm: asm: io.h: define readX_relaxed and writeX_relaxed

This patch port the function readX_relaxed and
writeX_relaxed from kernel 4.18.

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agomtd: nand: provide several helpers to do common NAND operations
Boris Brezillon [Fri, 15 Mar 2019 14:14:32 +0000 (15:14 +0100)]
mtd: nand: provide several helpers to do common NAND operations

Linux commit 97d90da8a88 ("mtd: nand: provide several helpers
to do common NAND operations")

This is part of the process of removing direct calls to ->cmdfunc()
outside of the core in order to introduce a better interface to execute
NAND operations.

Here we provide several helpers and make use of them to remove all
direct calls to ->cmdfunc(). This way, we can easily modify those
helpers to make use of the new ->exec_op() interface when available.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[miquel.raynal@free-electrons.com: rebased and fixed some conflicts]
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[Philippe Reynes: adapt code to u-boot and only keep new function]

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agomtd: nand: import nand_hw_control_init()
Marc Gonzalez [Fri, 15 Mar 2019 14:14:31 +0000 (15:14 +0100)]
mtd: nand: import nand_hw_control_init()

Linux commit d45bc58dd3b ("mtd: nand: import nand_hw_control_init()")

The code to initialize a struct nand_hw_control is duplicated across
several drivers. Factorize it using an inline function.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Philippe Reynes: adapt code to u-boot and only keep new function]

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agomtd: add get/set of_node/flash_node helpers
Brian Norris [Fri, 15 Mar 2019 14:14:30 +0000 (15:14 +0100)]
mtd: add get/set of_node/flash_node helpers

Linux commit 28b8b26b308 ("mtd: add get/set of_node/flash_node helpers")

We are going to begin using the mtd->dev.of_node field for MTD device
nodes, so let's add helpers for it. Also, we'll be making some
conversions on spi_nor (and nand_chip eventually) too, so get that ready
with their own helpers.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[Philippe Reynes: only add function nand_set_flash_node and
nand_get_flash_node because others were already backported]

Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
5 years agoMerge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmel
Tom Rini [Mon, 22 Apr 2019 14:28:21 +0000 (10:28 -0400)]
Merge tag 'u-boot-atmel-2019.07-b' of git://git.denx.de/u-boot-atmel

Second set of u-boot-atmel features and fixes for 2019.07 cycle

5 years agoat91: corvus_defconfig: get rid of build warnings
Heiko Schocher [Mon, 15 Apr 2019 11:53:19 +0000 (13:53 +0200)]
at91: corvus_defconfig: get rid of build warnings

fix CONFIG_OF_EMBED and add CONFIG_DM_USB
build warnings.

Signed-off-by: Heiko Schocher <hs@denx.de>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Sun, 21 Apr 2019 23:00:04 +0000 (19:00 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb

- Various fastboot, dwc2/stm32 updates

5 years agoMerge branch 'master' of git://git.denx.de/u-boot-socfpga
Tom Rini [Sun, 21 Apr 2019 22:59:30 +0000 (18:59 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga

- Various stratix10, gen5 updates

5 years agousb: dwc2: fix gadget disconnect
Fabrice Gasnier [Wed, 17 Apr 2019 14:46:13 +0000 (16:46 +0200)]
usb: dwc2: fix gadget disconnect

This fixes a disconnect issue detected with fastboot command, when using
dwc2 driver.
- On u-boot side:
uboot>$ fastboot 0
- On USB host PC side, few seconds after
PC>$ fastboot reboot # Get stuck, uboot target never reboots

By enabling DEBUG_ISR logs, the bus suspend interrupt is seen before the
PC command has been issued. When the USB bus suspend occurs, there's a HACK
that disables the fastboot (composite driver). Here is the call stack
upon USB bus suspend:
- dwc2_handle_usb_suspend_intr()
  - dev->driver->disconnect()
    - composite_disconnect()
      - reset_config()
        - f->disable()
          - fastboot_disable()
            - usb_ep_disable(f_fb->out_ep);
            - usb_ep_disable(f_fb->in_ep);
            .. other disable calls.

When the resume interrupt happens, everything has been disabled, then
nothing happens. fastboot command gets stuck on HOST side.

Remove original HACK, that disconnects the composite driver upon
USB bus suspend. Implement disconnect detection instead:
- check GINTSTS OTG interrupt
- read GOTGINT register
- check GOTGINT, SesEndDet bit (e.g. session end)
This is inspired by what is implemented currently in Linux dwc2 driver.

Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
5 years agousb: reload watchdog during ums command
Patrick Delaunay [Thu, 18 Apr 2019 15:18:39 +0000 (17:18 +0200)]
usb: reload watchdog during ums command

Reload the watchdog in the mass storage command ums
to avoid reboot during the usb waiting loop
when the host doesn't send any request.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agofastboot: add support for 'getvar platform'
Eugeniu Rosca [Tue, 9 Apr 2019 19:11:40 +0000 (21:11 +0200)]
fastboot: add support for 'getvar platform'

Our R-Car3 Android userspace relies on the output of 'fastboot
getvar platform' and U-Boot currently is not able to handle it:

host $> fastboot getvar platform
getvar:platform FAILED (remote: Variable not implemented)
finished. total time: 0.001s

We either have the option of adding 'fastboot.platform' variable
to the default/saved environment as a workaround or add proper
'fastboot getvar platform' support in U-Boot via this patch.
In the latter case, other platforms can benefit from it too.

Note that R-Car3 already exports 'platform' environment variable via
v2019.01 commit 00e4b57e9e71c3 ("ARM: rmobile: Set environment variable
containing CPU type").

Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
5 years agofastboot: Replace literal 32 with PART_NAME_LEN
Alex Kiernan [Tue, 9 Apr 2019 05:30:05 +0000 (05:30 +0000)]
fastboot: Replace literal 32 with PART_NAME_LEN

Where we have to compute partition names, rather than using a hardcoded
32 for the partition name length, replace with PART_NAME_LEN.

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
Reviewed-by: Eugeniu Rosca <rosca.eugeniu@gmail.com>
5 years agostm32mp1: add stusb1600 support for DK1 and DK2 board
Patrick Delaunay [Fri, 29 Mar 2019 14:42:24 +0000 (15:42 +0100)]
stm32mp1: add stusb1600 support for DK1 and DK2 board

The DK1 and DK2 boards use the USB Type-C controller STUSB1600.
This patch updates:
- the device tree to add the I2C node in the DT
- the board stm32mp1 to probe this I2C device and use this controller
  to check cable detection.
- the DWC2 driver to support a new dt property
  "u-boot,force-b-session-valid" which forces B session and
  device mode; it is a workaround because the VBUS sensing and
  ID detection isn't available with stusb1600.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agostm32mp1: migrate USBOTG device to driver model
Patrick Delaunay [Fri, 29 Mar 2019 14:42:23 +0000 (15:42 +0100)]
stm32mp1: migrate USBOTG device to driver model

Use the DWC2 device driver with DM_USB_GADGET support and
cleanup the USB support in STM32MP1 board.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agostm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO
Patrick Delaunay [Fri, 29 Mar 2019 14:42:22 +0000 (15:42 +0100)]
stm32mp1: remove CONFIG_USB_DWC2, HOST support for USBO

Remove the HOST support for STM32MP1 USBO device = OTG DWC2.
The current DWC2 driver have no dynamic detection of device,
So it is dangerous to have start 3V3 when PC is
connected to the micro USB connector.

=> it is preferable to have only DEVICE support
   CONFIG_USB_GADGET_DWC2_OTG for OTG port

See DWC3 driver for clean dual role support...

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agousb: dwc2: add support for STM32MP1
Patrick Delaunay [Fri, 29 Mar 2019 14:42:21 +0000 (15:42 +0100)]
usb: dwc2: add support for STM32MP1

Add compatible "st,stm32mp1-hsotg" and associated driver data to manage
the usb33d-supply and the ST specific register for VBus sensing.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
# Conflicts:
# drivers/usb/gadget/dwc2_udc_otg.c
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: dwc2_udc_otg: Add tx_fifo_sz array support
Patrice Chotard [Fri, 29 Mar 2019 14:42:20 +0000 (15:42 +0100)]
usb: dwc2_udc_otg: Add tx_fifo_sz array support

All TX fifo size can be different, add tx_fifo_sz_array[]
into dwc2_plat_otg_data to be able to set them.

tx_fifo_sz_array[] is 17 Bytes long and can contains max 16
tx fifo size (synopsys IP supports max 16 IN endpoints).
First entry of tx_fifo_sz_array[] is the number of valid
fifo size the array contains.

In case of tx_fifo_sz_array[] doesn't contains the same
number of element than max hardware endpoint, display
a warning message.

Compatibility with board which doesn't use tx_fifo_sz_array[]
(Rockchip rk322x/rk3128/rv1108/rk3288/rk3036) is kept.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register
Patrick Delaunay [Fri, 29 Mar 2019 14:42:19 +0000 (15:42 +0100)]
usb: dwc2_udc_otg: Read MAX_HW_ENDPOINT from HWCFG4 register

Some DWC2 ip variant doesn't use 16 hardware endpoint as hardcoded
in the driver. Bits INEps [29:26] of HWCFG4 register allows to get
this information.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: dwc2: Add function for session B check
Patrick Delaunay [Fri, 29 Mar 2019 14:42:18 +0000 (15:42 +0100)]
usb: dwc2: Add function for session B check

Add a new function to check the session B validity, to be use to check
cable connection.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: dwc2: Add force-b-session-valid support
Patrick Delaunay [Fri, 29 Mar 2019 14:42:17 +0000 (15:42 +0100)]
usb: dwc2: Add force-b-session-valid support

Handle "force-b-session-valid" property from DT.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: dwc2: force reset assert before to probe the driver
Patrick Delaunay [Fri, 29 Mar 2019 14:42:16 +0000 (15:42 +0100)]
usb: dwc2: force reset assert before to probe the driver

Reset the hardware to be sure of the device state.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: dwc2: convert driver to DM_USB_GADGET
Patrick Delaunay [Fri, 29 Mar 2019 14:42:15 +0000 (15:42 +0100)]
usb: dwc2: convert driver to DM_USB_GADGET

Minimal conversion to driver model by using the uclass
UCLASS_USB_GADGET_GENERIC based on:
- reset uclass
- clock uclass
- generic uclass.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: dwc2: remove unused variable regs_otg
Patrick Delaunay [Fri, 29 Mar 2019 14:42:14 +0000 (15:42 +0100)]
usb: dwc2: remove unused variable regs_otg

Remove the global regs_otg variable.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
5 years agophy: usbphyc: increase PLL wait timeout
Patrick Delaunay [Fri, 29 Mar 2019 14:42:13 +0000 (15:42 +0100)]
phy: usbphyc: increase PLL wait timeout

wait 200us to solve USB init issue on device mode
(ums and stm32prog commands)

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agophy: usbphyc: move vdda1v1 and vdda1v8 in phy_init
Patrick Delaunay [Fri, 29 Mar 2019 14:42:12 +0000 (15:42 +0100)]
phy: usbphyc: move vdda1v1 and vdda1v8 in phy_init

vdda1v1 and vdda1v8 are used by the PLL.
Both need to be enabled before starting the PLL.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agophy: usbphyc: Binding update of vdda supply
Patrick Delaunay [Fri, 29 Mar 2019 14:42:11 +0000 (15:42 +0100)]
phy: usbphyc: Binding update of vdda supply

Move supply vdda1v1 and vdda1v8 in usbphyc node and
no more in port

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agophy: usbphyc: update xlate with DT binding
Patrick Delaunay [Fri, 29 Mar 2019 14:42:10 +0000 (15:42 +0100)]
phy: usbphyc: update xlate with DT binding

Parameter added for port 1, for example:

&usbh_ehci {
phys = <&usbphyc_port0>;
phy-names = "usb";
vbus-supply = <&vbus_sw>;
status = "okay";
};

&usbotg_hs {
pinctrl-names = "default";
pinctrl-0 = <&usbotg_hs_pins_a>;
phys = <&usbphyc_port1 0>;
phy-names = "usb2-phy";
status = "okay";
};

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agophy: usbphyc: remove unused variable index
Patrick Delaunay [Fri, 29 Mar 2019 14:42:09 +0000 (15:42 +0100)]
phy: usbphyc: remove unused variable index

Remove unused field index in struct stm32_usbphyc_phy.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
5 years agofastboot: Improve error reporting on 'getvar partition-{size, type}'
Eugeniu Rosca [Thu, 28 Mar 2019 13:31:33 +0000 (14:31 +0100)]
fastboot: Improve error reporting on 'getvar partition-{size, type}'

Currently U-Boot reports the same error message in all below cases:
[A] host> fastboot getvar partition-type
[B] host> fastboot getvar partition-size
[C] host> fastboot getvar partition-type:
[D] host> fastboot getvar partition-size:
[E] host> fastboot getvar partition-type:<invalid-part>
[F] host> fastboot getvar partition-size:<invalid-part>

The message looks like:
host> fastboot getvar partition-size:
getvar:partition-size: FAILED (remote: partition not found)
Finished. Total time: 0.003s

Be more user friendly and output:
 - "partition not given" for [A-D]
 - "partition not found" for [E-F]

Fixes: f73a7df984a9 ("net: fastboot: Merge AOSP UDP fastboot")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alex Kiernan <alex.kiernan@gmail.com>
5 years agofastboot: getvar: correct/rename "has_slot" to "has-slot"
Eugeniu Rosca [Tue, 26 Mar 2019 16:46:14 +0000 (17:46 +0100)]
fastboot: getvar: correct/rename "has_slot" to "has-slot"

Since its inception in upstream fastboot android-n-preview-1 [1],
"has-slot" option has never taken the form of "has_slot". Amongst the
users of "getvar has-slot:" is the upstream bootloadertest.py [2].

Current U-Boot "has_slot" version must be a typo. Fix it.

[1] https://android.googlesource.com/platform/system/core/+/a797479bd51c
    ("Fix fastboot variable name")
[2] https://android.googlesource.com/platform/system/extras/+/72de393e118e3
    ("Bootloader verification for AndroidThings.")

Fixes: f73a7df984a9 ("net: fastboot: Merge AOSP UDP fastboot")
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Acked-by: Alex Kiernan <alex.kiernan@gmail.com>
5 years agodfu: Avoid declaring unused variables and absent parameters
Andy Shevchenko [Mon, 4 Mar 2019 14:04:44 +0000 (16:04 +0200)]
dfu: Avoid declaring unused variables and absent parameters

The compiler is not happy when neither USB nor TFTP transport for DFU defined:

cmd/dfu.c: In function ‘do_dfu’:
cmd/dfu.c:31:8: warning: unused variable ‘devstring’ [-Wunused-variable]
  char *devstring = argv[3];
        ^~~~~~~~~
cmd/dfu.c:30:8: warning: unused variable ‘interface’ [-Wunused-variable]
    char *interface = argv[2];
          ^~~~~~~~~

Surround those variables by #ifdef expression.

More serious, that comes under same circumstances, is a compilation error due
to absence of macro parameter:

In file included from include/image.h:45,
                 from include/common.h:35,
                 from cmd/dfu.c:13:
include/command.h:207:24: error: expected expression before ‘,’ token
 # define _CMD_HELP(x) x,
                        ^
include/command.h:286:18: note: in expansion of macro ‘_CMD_HELP’
    _cmd, _usage, _CMD_HELP(_help) _CMD_COMPLETE(_comp) }
                  ^~~~~~~~~
include/command.h:290:3: note: in expansion of macro ‘U_BOOT_CMD_MKENT_COMPLETE’
   U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd, \
   ^~~~~~~~~~~~~~~~~~~~~~~~~
include/command.h:332:2: note: in expansion of macro ‘U_BOOT_CMD_COMPLETE’
  U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
  ^~~~~~~~~~~~~~~~~~~
cmd/dfu.c:70:1: note: in expansion of macro ‘U_BOOT_CMD’
 U_BOOT_CMD(dfu, CONFIG_SYS_MAXARGS, 1, do_dfu,
 ^~~~~~~~~~
make[1]: *** [scripts/Makefile.build:279: cmd/dfu.o] Error 1
make: *** [Makefile:1518: cmd] Error 2

Put empty string unconditionally to have macro parameter present.

Fixes: 0f44d33536a5 ("dfu: Fix up the Kconfig mess")
Cc: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Lukasz Majewski <lukma@denx.de>
5 years agousb: Select USB_MUSB_DSPS with USB_MUSB_TI
Alex Kiernan [Thu, 18 Apr 2019 11:10:50 +0000 (11:10 +0000)]
usb: Select USB_MUSB_DSPS with USB_MUSB_TI

USB_MUSB_TI requires USB_MUSB_DSPS, failing at link time if it's not
selected:

  drivers/usb/musb-new/built-in.o: In function `ti_musb_host_ofdata_to_platdata':
  drivers/usb/musb-new/ti-musb.c:193: undefined reference to `musb_dsps_ops'

or if OF_CONTROL is not selected:

  arch/arm/mach-omap2/built-in.o:(.data.usb0+0x24): undefined reference to `musb_dsps_ops'

Reviewed-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Tested-by: Hannes Schmelzer <oe5hpm@oevsv.at>
Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
5 years agoconfigs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig
Alex Kiernan [Fri, 12 Apr 2019 10:51:05 +0000 (10:51 +0000)]
configs: Migrate USB_MUSB_DISABLE_BULK_COMBINE_SPLIT to Kconfig

Migrate support for disable MUSB bulk split/combine to Kconfig

Green Travis build:

https://travis-ci.org/akiernan/u-boot/builds/519101867

Signed-off-by: Alex Kiernan <alex.kiernan@gmail.com>
5 years agoMerge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arc
Tom Rini [Thu, 18 Apr 2019 16:12:16 +0000 (12:12 -0400)]
Merge tag 'arc-for-2019.07' of git://git.denx.de/u-boot-arc

In this small series we migrate ARC boards to DM_MMC
so we're hopefully are good now and our boards will be kept
in U-Boot for some more time :)

5 years agoboard: sama5d2_icp: Enable MACB driver
Razvan Stefanescu [Tue, 18 Dec 2018 11:10:24 +0000 (13:10 +0200)]
board: sama5d2_icp: Enable MACB driver

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
5 years agoARM: dts: at91-sama5d2-icp: Add MACB node
Razvan Stefanescu [Wed, 12 Dec 2018 10:42:05 +0000 (12:42 +0200)]
ARM: dts: at91-sama5d2-icp: Add MACB node

MACB has a fixed link connection to KSZ8563 switch port.

Signed-off-by: Razvan Stefanescu <razvan.stefanescu@microchip.com>
5 years agoboard: atmel: add SAMA5D2 ICP board
Eugen Hristev [Fri, 6 Jul 2018 08:15:10 +0000 (11:15 +0300)]
board: atmel: add SAMA5D2 ICP board

The SAMA5D2 ICP Board features the SAMA5D27 SoC,
together with QSPI Flash, Wilc3000 wireless device and
EtherCat support.

Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
5 years agoARC: [plat-axs10x]: migrate to DM_MMC
Eugeniy Paltsev [Thu, 21 Mar 2019 13:37:23 +0000 (16:37 +0300)]
ARC: [plat-axs10x]: migrate to DM_MMC

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
5 years agoARC: [plat-hsdk]: migrate to DM_MMC
Eugeniy Paltsev [Mon, 25 Feb 2019 15:35:29 +0000 (18:35 +0300)]
ARC: [plat-hsdk]: migrate to DM_MMC

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
5 years agoARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards
Eugeniy Paltsev [Mon, 25 Feb 2019 15:35:28 +0000 (18:35 +0300)]
ARC: dwmmc: Adding DesignWare MMC driver support for ARC devboards

Add the DM_MMC-compatible DesignWare MMC driver support for Synopsys
ARC devboards. It is created to switch ARC devboards to use DM_MMC.

It required information such as clocks (Bus Interface Unit clock,
Card Interface Unit clock) and SDIO bus width.

Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
5 years agotimer: dw-apb: Add missing 64bit up-conversion
Marek Vasut [Wed, 10 Apr 2019 11:44:05 +0000 (13:44 +0200)]
timer: dw-apb: Add missing 64bit up-conversion

The generic timer count is an incrementing 64bit value and a timer driver
must return an incrementing 64bit value. The DW APB timer only provides a
32bit timer counting down, thus the result must be inverted and converted
to a 64bit value. The current implementation is however missing the 64bit
up-conversion and this results in random timer roll-overs, which in turn
triggers random timeouts throughout the codebase.

This patch adds the missing 64bit up-conversion to fix the issue.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
Cc: Tien Fong Chee <tien.fong.chee@intel.com>
5 years agoarm: dts: Stratix10: Add QSPI node
Ley Foon Tan [Wed, 3 Apr 2019 05:45:02 +0000 (13:45 +0800)]
arm: dts: Stratix10: Add QSPI node

Merge qspi dts node from Linux.
Commit 0cb140d07fc75fb (arm64: dts: stratix10: Add QSPI support for Stratix10)

Add -u-boot.dtsi files for non Linux dts properties and
update properties for Uboot.
- add u-boot,dm-pre-reloc
- add alias for spi0
- change compatible for flash
- support quad read and quad write
- change maximum frequency to 100MHz

Tested on Stratix 10 SoC devkit.
SOCFPGA_STRATIX10 # sf probe 0:0
SF: Detected mt25qu02g with page size 256 Bytes, erase size 64 KiB, total 256 MiB

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
5 years agoddr: altera: Stratix10: Add ECC memory scrubbing
Ley Foon Tan [Thu, 21 Mar 2019 17:24:05 +0000 (01:24 +0800)]
ddr: altera: Stratix10: Add ECC memory scrubbing

Scrub memory content if ECC is enabled and it is not
from warm reset boot.

Enable icache and dcache before scrub memory
and use "DC ZVA" instruction to clear memory
to zeros. This instruction writes a cache line
at a time and it can prevent false ECC error
trigger if write cache line partially.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
5 years agoarm: socfpga: stratix10: Add cpu_has_been_warmreset()
Ley Foon Tan [Thu, 21 Mar 2019 17:24:04 +0000 (01:24 +0800)]
arm: socfpga: stratix10: Add cpu_has_been_warmreset()

Add helper function cpu_has_been_warmreset() to check
if CPU is from warm reset boot.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
5 years agoarm: dts: Stratix10: Modify stratix10 socdk memory node
Ley Foon Tan [Thu, 21 Mar 2019 17:24:03 +0000 (01:24 +0800)]
arm: dts: Stratix10: Modify stratix10 socdk memory node

The stratix10 socdk ships with 4GB of memory.  Modify the
device tree to represent this.  Note that to access 4GB of
memory in Stratix 10, due to the IO space from 2GB to 4GB,
we use the fact that the DDR controller ignores upper address
bits outside of the configured DRAM's size.  This means that
, the 4GB DRAM is mapped to memory every 4GB.

For an 8GB memory, you can either live with the 2GB IO space,
and loose access to that memory from the processor, or use
the same trick:

Loose 2GB of memory:
        memory {
                device_type = "memory";
                /* 8GB */
/* first 2GB */
                reg = <0 0x00000000 0 0x80000000>,
/* last 4GB */
                      <1 0x00000000 1 0x00000000>;
                u-boot,dm-pre-reloc;
        };

or to map it all:
        memory {
                device_type = "memory";
                /* 8GB */
/* first 2GB */
                reg = <0 0x00000000 0 0x80000000>,
/* next 6GB */
                      <2 0x80000000 1 0x80000000>;
                u-boot,dm-pre-reloc;
        };

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
5 years agoconfigs: stratix10: Change CONFIG_NR_DRAM_BANKS to 2
Ley Foon Tan [Thu, 21 Mar 2019 17:24:02 +0000 (01:24 +0800)]
configs: stratix10: Change CONFIG_NR_DRAM_BANKS to 2

Stratix10 maps dram in 2 address spans, from 0-2GB and from
2GB up to 128GB.

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
5 years agoddr: altera: Stratix10: Add multi-banks DRAM size check
Ley Foon Tan [Thu, 21 Mar 2019 17:24:01 +0000 (01:24 +0800)]
ddr: altera: Stratix10: Add multi-banks DRAM size check

Stratix 10 maps dram from 0 to 128GB.  There is a 2GB hole
in the memory for peripherals and other IO from 2GB to 4GB.
However the dram controller ignores upper address bits for
smaller dram configurations.  Example: a 4GB dram
maps to multiple locations, every 4GB on the address.

Signed-off-by: Dalon Westergreen <dalon.westergreen@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
5 years agoddr: altera: stratix10: Move SDRAM size check to SDRAM driver
Ley Foon Tan [Thu, 21 Mar 2019 17:24:00 +0000 (01:24 +0800)]
ddr: altera: stratix10: Move SDRAM size check to SDRAM driver

Move SDRAM size check to SDRAM driver. sdram_calculate_size()
is called in SDRAM initialization already, avoid calling
twice in size check function.

Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
5 years agoarm: socfpga: implement proper peripheral reset
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:36 +0000 (20:12 +0100)]
arm: socfpga: implement proper peripheral reset

This commit removes ad-hoc reset handling for peripheral resets from SPL
for socfpga gen5.

This is done because as U-Boot drivers support reset handling by now.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agospi: cadence_qspi: add reset handling
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:35 +0000 (20:12 +0100)]
spi: cadence_qspi: add reset handling

This adds reset handling to the cadence qspi driver.

For backwards compatibility, only a warning is printed when failing to
get reset handles.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agomtd: rawnand: denali: add reset handling
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:34 +0000 (20:12 +0100)]
mtd: rawnand: denali: add reset handling

This adds reset handling to the devicetree-enabled Denali NAND driver.

For backwards compatibility, only a warning is printed when failing to
get reset handles.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agoarm: socfpga: move gen5 SDR driver to DM
Simon Goldschmidt [Tue, 16 Apr 2019 20:04:39 +0000 (22:04 +0200)]
arm: socfpga: move gen5 SDR driver to DM

To clean up reset handling for socfpga gen5, port the DDR driver to DM
using UCLASS_RAM and implement proper reset handling.

This gets us rid of one ad-hoc call to socfpga_per_reset().

The gen5 driver is implemented in 2 distinct files. One of it (containing
the calibration training) is not touched much and is kept at using
hard coded addresses since the code grows even more otherwise.

SPL is changed from calling hard into the DDR driver code to just
probing UCLASS_RESET and UCLASS_RAM. It is happy after finding a RAM
driver after that.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agoreset: socfpga: add reset handling for old kernels
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:32 +0000 (20:12 +0100)]
reset: socfpga: add reset handling for old kernels

This adds code to take peripherals out of reset based on an environment
variable. This is in preparation for removing the code that does this from
SPL.

However, some drivers even in current Linux cannot handle peripheral reset,
so until this works, we need a compatibility workaround.

This workaround is implemented in the 'assert' and 'remove' callbacks of
this reset driver: the 'assert' callback does not disable peripherals that
were already taken out of reset, while the 'remove' callback, which is
called on OS_PREPARE, deasserts all peripheral resets if the environment
variable "socfpga_legacy_reset_compat" is set to 1, which is what the gen5
SPL did up to now.

This is in preparation to clean up the SPL and implementing proper reset
handling for U-Boot.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agoarm: socfpga: gen5: deassert peripheral reset by default
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:31 +0000 (20:12 +0100)]
arm: socfpga: gen5: deassert peripheral reset by default

To keep the current behaviour of taking all peripherals out of reset
before booting the OS before removing that code from socfpga gen5 SPL,
this enables the new behaviour by default for all gen5 boards by adding
the environment variable "socfpga_legacy_reset_compat=1" to the default
environment.

This can be overridden in board config files or by saving an environment
without this variable enabled.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agoreset: socfpga: rename membase ptr to modrst_base
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:30 +0000 (20:12 +0100)]
reset: socfpga: rename membase ptr to modrst_base

The only member of this driver's priv struct is a pointer, which is
called 'membase'. However, since this driver handles multiple sub-
architectures, this is not the base address from dts but the base
address of some common registers of those sub-arches.

Reflect this better in sourcecode by renaming 'membase' to 'modrst_base'.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agoarm: socfpga: gen5: add reset & sdr node to SPL devicetrees
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:29 +0000 (20:12 +0100)]
arm: socfpga: gen5: add reset & sdr node to SPL devicetrees

The SPL for socfpga gen5 currently takes all peripherals out of reset
unconditionally. To implement proper reset handling for peripherals,
the reset node has to be provided with the SPL dts.

In preparation to move the DDR driver to DM, the sdr node is required
in SPL, too.

This patch adds "u-boot,dm-pre-reloc" to U-Boot specific dtsi addon
files so that the reset manager and SDR driver correctly probe in SPL.
It centralizes these settings into a common file since in contrast to
boot-type specific nodes, "soc", "rst" and "sdr" are always needed.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agoarm: socfpga: gen5: sync devicetrees to Linux
Simon Goldschmidt [Fri, 1 Mar 2019 19:12:28 +0000 (20:12 +0100)]
arm: socfpga: gen5: sync devicetrees to Linux

This is again a sync to linux-next + pending patches in Dinh's tree at
commit 1c909b2dfe6a ("ARM: dts: socfpga: update more missing reset
properties")'

It adds missing peripheral reset properties to socfpga.dtsi and removes
U-Boot specific leftovers from socfpga_cyclone5_socrates.dts.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-spi
Tom Rini [Wed, 17 Apr 2019 13:21:32 +0000 (09:21 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-spi

- drop non-DM code from ti_qspi
- support spi-mem for ti_qspi

5 years agoarm: am57xx: cl-som-am57x: remove board support
Uri Mashiach [Sun, 14 Apr 2019 09:17:53 +0000 (12:17 +0300)]
arm: am57xx: cl-som-am57x: remove board support

U-Boot support for the CL-SOM-AM57x module is no longer required.

Signed-off-by: Uri Mashiach <uri.mashiach@compulab.co.il>
5 years agoMerge branch 'master' of git://git.denx.de/u-boot-sunxi
Tom Rini [Wed, 17 Apr 2019 13:19:45 +0000 (09:19 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sunxi

- Convert DM_MMC and DM_SCSI
- A20, R40, H6 Linux dts(i) sync
- CLK, RESET support for sunxi, sun8_emac net drivers

5 years agoMerge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze
Tom Rini [Wed, 17 Apr 2019 13:19:13 +0000 (09:19 -0400)]
Merge tag 'xilinx-for-v2019.07' of git://git.denx.de/u-boot-microblaze

Xilinx/FPGA changes for v2019.07

fpga:
- Add support for external data in FIT
- Extend testing for external data case
- Inform user about a need to run post config on Zynq

arm:
- Tune zynq command functions
- Fix internal variable setting

arm64:
- Add support for zc39dr decoding
- Disable WDT for zcu100
- Small changes in reset_reason()
- Some DT changes (spi)
- Tune qspi-mini configuration
- Remove useless eeprom setting
- Fix two sdhci boot case

spi:
- Fix tap delay programming

clk:
- Enable i2c in SPL

net:
- Fix gem phydev handling
- Remove phy detection code from gem driver

general:
- Correct EXT_DTB usage for MULTI_DTB_FIT configuration

5 years agoMerge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphier
Tom Rini [Wed, 17 Apr 2019 13:16:38 +0000 (09:16 -0400)]
Merge tag 'uniphier-v2019.07' of git://git.denx.de/u-boot-uniphier

UniPhier SoC updates for v2019.07

- Sync DT with Linux 5.1-rc4

- Enable CONFIG_SUPPORT_EMMC_RPMB for uniphier_v8_defconfig

5 years agospi: ti_qspi: Convert to spi-mem ops
Vignesh Raghavendra [Tue, 16 Apr 2019 16:02:00 +0000 (21:32 +0530)]
spi: ti_qspi: Convert to spi-mem ops

Convert driver to use  spi-mem ops in order to support accelerated MMIO
flash interface in generic way and for better performance.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agospi: ti_qspi: Drop non DM code
Vignesh Raghavendra [Tue, 16 Apr 2019 16:01:59 +0000 (21:31 +0530)]
spi: ti_qspi: Drop non DM code

Now that all boards using TI QSPI have moved to DM and DT, drop non DM
code completely.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
[jagan: update MIGRATION.txt, rebase config_whitelist.txt]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agosunxi: update SATA driver to always use DM_SCSI
Andre Przywara [Fri, 12 Apr 2019 10:58:54 +0000 (16:28 +0530)]
sunxi: update SATA driver to always use DM_SCSI

It seems like the Allwinner SATA driver is already quite capable of
using the driver model, so we can force this on all boards and can
remove support for a non-DM_SCSI build.
This removes the warning about boards with SATA ports not being
DM_SCSI compliant.

It also takes the opportunity to move the driver out of the board/sunxi
directory to join its siblings in drivers/ata, and to make it a proper
Kconfig citizen.

The board defconfigs stay untouched.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
[jagan: select DM_SCSI separately]
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoarm: sunxi: Enable DM_MMC and DM_SCSI
Jagan Teki [Fri, 12 Apr 2019 11:18:25 +0000 (16:48 +0530)]
arm: sunxi: Enable DM_MMC and DM_SCSI

- Enable DM_MMC if MMC defined
- Enable DM_SCSI if SCSI defined

globally through Allwinner platform, the effected SoC families
and boards will make use of MMC and SCSI subsystems in driver-model.

Tested DM_MMC in one board from A64, H6, H5, H3, R40, A83T, A20, A10
SoCs.

Tested-by: Pablo Sebastián Greco <pgreco@centosproject.org> # BPI-M2-Ultra
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCI
Jagan Teki [Mon, 15 Apr 2019 06:12:32 +0000 (11:42 +0530)]
ARM: dts: sun8i-r40-bananapi-m2-berry: Enable AHCI

Enable ahci node for BPI-M2-Berry, this would require since
we have DM_SCSI enabled on the respective SoC.

Unable to sync the same node from Linux, since the similar change
is still in Linux ML.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoARM: dts: a20-wits-pro-a20-dkt: Enable AHCI
Jagan Teki [Fri, 12 Apr 2019 12:11:58 +0000 (17:41 +0530)]
ARM: dts: a20-wits-pro-a20-dkt: Enable AHCI

Enable ahci node for a20-wits-pro-a20-dkt, this would require since
we have DM_SCSI enabled on the respective SoC.

Right now, ahci enabled in -u-boot.dtsi and will remove once same
supported by Linux.

Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoARM: dts: a20-m5: Enable AHCI
Jagan Teki [Fri, 12 Apr 2019 12:05:24 +0000 (17:35 +0530)]
ARM: dts: a20-m5: Enable AHCI

Enable ahci node for sun7i-a20-m5.dts, this would require since
we have DM_SCSI enabled on the respective SoC.

No need to send patch to Linux for this change, since this
dts is U-Boot specific.

Cc: Ian Campbell <ijc@hellion.org.uk>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoboard: sunxi: Add R40 sata compatible
Jagan Teki [Fri, 12 Apr 2019 11:17:56 +0000 (16:47 +0530)]
board: sunxi: Add R40 sata compatible

Add sata compatible for R40.

Cc: Pablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoarm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2
Jagan Teki [Fri, 12 Apr 2019 10:49:34 +0000 (16:19 +0530)]
arm: allwinner: dts: a20: Sync A20 dts(i) files from Linux 5.1-rc2

Sync sun7i-a20 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun7i-a20* sync:
"ARM: dts: sun7i: bananapi: Add GPIO banks regulators"
(sha1: 09c6572290f018d73ec2e812e28bada34d41815f)

Here are U-Boot specific dts changes.

- s/uart0_pins_a/uart0_pb_pins for
  sun7i-a20-ainol-aw1.dts
  sun7i-a20-m5.dts
  sun7i-a20-primo73.dts
  sun7i-a20-yones-toptech-bd1078.dts
  sunxi-itead-core-common.dtsi
- s/gmac_pins_mii_a/gmac_rgmii_pins for
  sun7i-a20-m5.dts
- drop i2c0, i2c1 pins from
  sunxi-itead-core-common.dtsi
- drop mmc0 pins from
  sun7i-a20-primo73.dts

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoarm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2
Jagan Teki [Tue, 9 Apr 2019 09:38:51 +0000 (15:08 +0530)]
arm: allwinner: r40: Sync R40 dts(i) files from Linux 5.1-rc2

Sync sun8i-r40 dts(i) files from Linux 5.1-rc2

Linux commit details about the sun8i-r40* sync:
"ARM: dts: sun8i: r40: bananapi-m2-ultra: Add Bluetooth device node"
(sha1: 1e5f1db4ccd8348a21da55bff82f4263000879ef)

Linux commit details about the sun8i-v40* sync:
"ARM: dts: sunxi: Fix I2C bus warnings"
(sha1: 0729b4af5753b65aa031f58c435da53dbbf56d19)

Cc: Pablo Sebastián Greco <pgreco@centosproject.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agoARM: uniphier_v8: enable CONFIG_SUPPORT_EMMC_RPMB
Masahiro Yamada [Fri, 12 Apr 2019 09:55:51 +0000 (18:55 +0900)]
ARM: uniphier_v8: enable CONFIG_SUPPORT_EMMC_RPMB

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
5 years agoARM: dts: uniphier: sync with Linux 5.1-rc4
Masahiro Yamada [Fri, 12 Apr 2019 09:55:50 +0000 (18:55 +0900)]
ARM: dts: uniphier: sync with Linux 5.1-rc4

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
5 years agoboard: sunxi: gmac: Remove Ethernet clock and reset
Jagan Teki [Wed, 27 Feb 2019 18:57:01 +0000 (00:27 +0530)]
board: sunxi: gmac: Remove Ethernet clock and reset

Since Ethernet clock and reset is now handling via
CLK and RESET frameworks via driver API's remove
explicit ccm writes.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
5 years agonet: sun8i_emac: Add CLK and RESET support
Jagan Teki [Wed, 27 Feb 2019 18:56:58 +0000 (00:26 +0530)]
net: sun8i_emac: Add CLK and RESET support

Add CLK and RESET support for sun8i_emac driver to
enable TX clock and reset pins via CLK and RESET
framework.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
5 years agonet: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle
Jagan Teki [Wed, 27 Feb 2019 18:56:51 +0000 (00:26 +0530)]
net: sun8i_emac: Retrieve GMAC clock via 'syscon' phandle

Unlike other Allwinner SoC's R40 GMAC clock control register
is locate in CCU, but rest located via syscon itself. Since
the phandle property for current code look for 'syscon' and
it will grab the respective ccu or syscon base address based
on DT property defined in respective SoC dtsi.

So, use the existing 'syscon' code even for R40 for retrieving
GMAC clock via CCU and update the register directly in
sun8i_emac_set_syscon instead of writing it separately using
ccm base.

Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>