ralink: fix switch config on mt7530 evb

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43105

ralink: fix a off by 4 bug in mt7530

0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail.

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43104

Add support for DHT11 driver

The DHT11 is a temperature and humidity sensor supported by linux
since 3.14.

This patch is tested on recent mxs with kernel 3.14.18.

Signed-off-by: Harald Geyer <harald@ccbib.org>
SVN-Revision: 43103

ramips: add support for A5-V11 board (resubmit)

(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>
SVN-Revision: 43102

lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotes

lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by
detecting whether vdsl_cpe_control or dsl_cpe_control should be used.
Also add missing quotes around shell string comparision.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43101

brcm47xx: initial support for kernel 3.18

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43100

kernel: add closing " to REGMAP_I2C's tristate

Thanks swalker for reporting.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43099

bcm53xx: remove support for fpu

This SoC does not have a vfpv3 FPU.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43098

bcm53xx: initial support for kernel 3.18

This adds initial support for kernel 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43097

kernel: add generic config for kernel 3.18

There are still many options missing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43096

kernel: make the kernel 3.18 patches apply and boot on arm.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43095

kernel: make it possible to select experimental 3.18 (3.18-rc2)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43094

kernel: start working on 3.18 support

This commit:
1) Copies 3.14 patches
2) Drops mainlined stuff
3) Modifies some patches to apply

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43093

iwinfo: add cli support for phy lookup from uci section

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43092

kernel: 3.14: use patch that is really upstreamed for hso 0af0:9200

Patch 060 we had in repo was never sent/accepted.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43091

fstools: update to latest git head

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43090

libiconv: do not replace untranslatable characters with * or ?

Instead throw an -EILSEQ error.

Signed-off-by: Tjalling Hattink <t.hattink@fugro.nl>
SVN-Revision: 43089

base-files: config_generate did not handle setups with more than 1 switch properly

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43088

iwinfo: switch to external git repo, support lookup by phyname & macaddr

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43087

config: use PARTUUID by default on x86_64

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43086

busybox: make high ASCII chars printable (#7993)

Currently busybox utils like "ls" fail to display filenames containing UTF-8
characters, replacing any special characters with "?".

Change libbb's printable_string() function to allow high ASCII characters so
that unicode filenames are displayed correctls.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43084

px5g-standalone: use /dev/urandom to initialize serial (#18232)

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43080

mac80211: fix key flush handling in AP+STA

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43079

uhttpd: fix HTTP incompatibilities in file handler

 * Fixes sending an extraneous message body for 204 and 304 resoponses which
   breaks Chrome in keep-alive mode.

 * Adds mimetypes for JSON and JSONP.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43078

e2fsprogs: fix description, tune2fs is not part of the e2fsprogs package

https://dev.openwrt.org/ticket/18209

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43076

mpc85xx: fix WAN/LAN-MAC for TP-LINK TL-WDR4900 v1

This works around a bootloader issue where every device
has the same lan/wan-mac 00:04:9f:ef:01:01 - with this patch
we read the macs from config-partition during initial network
setup. We have 9 valid macs stored in the partition, the
1st two are used for the radios, 3 and 4 are now used for WAN/LAN.

on an already setup / running device we can get the real macs with
. /lib/functions.sh
. /lib/functions/system.sh
echo "LAN = $(mtd_get_mac_binary config 338)"
echo "WAN = $(mtd_get_mac_binary config 344)"

see:
https://dev.openwrt.org/ticket/14714

from the ticket / user klondike:
U-Boot passed this commit https://gitorious.org/0xlab-kernel/u-boot/commit/ecd1a09b81f2ed6e6ba7bd1d0bfb0cc3d0ea2ad0
http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-mpc83xx-remove-hardcoded-network-addresses-from-config-files-td44372.html
I suppose to prevent this particular issue, but the WDR4900 may be using an old bootloader still affected.
                                                                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I have been checking the contents of the dtb on the flash, this particular bit is quite revealing:

ethernet@b0000 {
                        #address-cells = <0x1>;
                        #size-cells = <0x1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "fsl,etsec2";
                        fsl,num_rx_queues = <0x8>;
                        fsl,num_tx_queues = <0x8>;
                        local-mac-address = [00 00 00 00 00 00];
                                             ^^^^^^^^^^^^^^^^^

                        interrupt-parent = <0x2>;
                        phy-handle = <0x3>;
                        phy-connection-type = "rgmii-id";
                        ptimer-handle = <0x4>;

                        queue-group@0 {
                                #address-cells = <0x1>;
                                #size-cells = <0x1>;
                                reg = <0xb0000 0x1000>;
                                rx-bit-map = <0xff>;
                                tx-bit-map = <0xff>;
                                interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
                        };
                };

I also have been checking the live device map to find this:

root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b0000/local-mac-address
00000000  00 04 9f ef 01 01                                 |......|
00000006
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b1000/local-mac-address
*
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b2000/local-mac-address
*

My conclussion is that U-Boot most likely finds the device and (as no valid MAC-address is provided)
falls back to the default MAC provided by the old code, the kernel then receives thee modified
device map from U-Boot and assumes this is the correct MAC for the device despite it obviously isn't.

This can be seen at
target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch

The enetaddr is filled up by using the device tree data by the process_boot_dtb
function and used by the platform_fixups function to set the eth0 address
(by calling dt_fixup_mac_address_by_alias("ethernet0", enetaddr); ).
But instead we should be used the device address which to my understanding is
provided in the mtd.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43074

ramips: fix filenames in PorayDualSize factory images

SVN-Revision: 43073

vgv7519: support more recent board release with vrx288 v1.2

The existance of this new board has been confirmed and tested by the guy on this commit

https://github.com/openwrt-vgv7519/uboot-bin/commit/76fdd8e638f81e324ffe77856481bd147398f6e8

SVN-Revision: 43072

comgt: fix typo in the ncm proto handler

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43071

generate list of license information for packages

Many packages define already metadata about their license (PKG_LICENSE),
but this is only included in the ipk files.

This change allows to create the information also on the build-host,
to get an overview on the used licenses.
In the full list, also all packages without this info are shown

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>
SVN-Revision: 43070

util-linux-dmesg: Add missing install section

Package util-linux-dmesg is broken (at least) in Barrier Breaker git repo
as you can select it within menuconfig, it will compile (as a part of
util-linux) but it will not install as install section is missing from
package Makefile.

Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com>
SVN-Revision: 43069

Revert "include/shell.sh: remove getvar()"

It is more widely used than I thought.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43068

findutils: add dependency on bison

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43064

broadcom-wl: align with mac80211 config

 - Support HT40 instead of HT40+/HT40- like mac80211
 - Enable 11n if htmode is HT20 or HT40

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43063

base-files: add /etc/shadow to list of essential files to keep in sysupgrade (bug 18206)

Based on bug #18206 sysupgrade can lead to loss of password information in
certain situations. Most likely all users who will upgrade from versions
r43017-43040, will lose their current passwords. :-(
https://dev.openwrt.org/ticket/18206

Currently /etc/shadow is defined as a conffile in base-files:
https://dev.openwrt.org/browser/trunk/package/base-files/Makefile#L37

But it is not defined in the default list of essential files to keep in
sysupgrade:
https://dev.openwrt.org/browser/trunk/package/base-files/files/lib/upgrade/keep.d/base-files-essential

If exporting conffiles info fails, /etc/shadow can get lost.

Shadow passwords are now the default, so saying that preserving /etc/passwd
is essential while /etc/shadow is not, makes no sense.

The attached patch adds /etc/shadow to the list of essential files.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 43061

tools: Fix compilation on x32 host

Compiling the host tools on the new x32 architecture (which is
an ILP32 ELF32 system on an amd64 CPU) fails for various reasons.

 gmp: pull same fix I applied to OpenADK, which was inspired
  by the fix in the Debian source package

 mtd-utils: write a workaround myself; only affects x32, but
  the use of llseek is dangerous according to the manpage, so
  the guard ifdef should probably go away

 findutils: pull fix straight from the Debian source packae

Signed-off-by: Thorsten Glaser <tg@mirbsd.org>
SVN-Revision: 43060

hostapd: update to 2014-10-25

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43059

ath9k: add a few calibration related fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43058

odhcp6c: avoid some unnecessary big mallocs

SVN-Revision: 43056

rtlwifi: unbreak usb drivers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43052

ar71xx: refresh 3.10 patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43051

kernel: refresh generic 3.10 patches

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43050

kernel: update 3.10.49 to 3.10.58 (released 2014-oct-15)

All platforms which are using 3.10.x at the moment are upgraded.

Changelogs:
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.50
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.51
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.52
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.53
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.54
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.55
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.56
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.57
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.58

A new symbol 'X86_16BIT' appeared in 3.10.52 with commit 34273f41d57ee8d854dcd2a1d754cbb546cb548f
("x86-espfix-make-it-possible-to-disable-16-bit-support.patch")
I defaults to 'unset', but it's worth a discussion to enable it
("turn off support for any 16-bit software").

Also removed the patch 0db3db45f5bd6df4bdc03bbd5dec672e16164c4e
("fix build failure on memcpy() in decompress.c")
and is obsolete by commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.
included in kernel 3.10.56

compile tested on all platforms with:
make tools/install
make toolchain/install
make target/linux/compile

user@box:~/user/openwrt$ cat /tmp/log.txt
[Wed Oct 22 00:36:02 CEST 2014] ./smoketest.sh: ar71xx - OK
[Wed Oct 22 00:53:22 CEST 2014] ./smoketest.sh: ar7 - OK
[Wed Oct 22 01:08:27 CEST 2014] ./smoketest.sh: au1000 - OK
[Wed Oct 22 01:21:43 CEST 2014] ./smoketest.sh: avr32 - OK
[Wed Oct 22 01:37:47 CEST 2014] ./smoketest.sh: cns21xx - OK
[Wed Oct 22 01:52:05 CEST 2014] ./smoketest.sh: cns3xxx - OK
[Wed Oct 22 02:10:23 CEST 2014] ./smoketest.sh: gemini - OK
[Wed Oct 22 02:29:07 CEST 2014] ./smoketest.sh: ixp4xx - OK
[Wed Oct 22 02:44:01 CEST 2014] ./smoketest.sh: malta - OK
[Wed Oct 22 02:55:57 CEST 2014] ./smoketest.sh: mpc85xx - OK
[Wed Oct 22 03:07:56 CEST 2014] ./smoketest.sh: orion - OK
[Wed Oct 22 03:24:30 CEST 2014] ./smoketest.sh: ppc40x - OK
[Wed Oct 22 03:40:19 CEST 2014] ./smoketest.sh: ppc44x - OK
[Wed Oct 22 03:55:29 CEST 2014] ./smoketest.sh: realview - OK
[Wed Oct 22 04:09:47 CEST 2014] ./smoketest.sh: sparc - OK
[Wed Oct 22 04:23:37 CEST 2014] ./smoketest.sh: x86 - OK
[Wed Oct 22 04:35:56 CEST 2014] ./smoketest.sh: xburst - OK

run tested on x86, au1000, ar71xx, mpc85xx and brcm47xx

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43049

netlogic: use KERNEL_PATCHVER

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43048

kernel: makefiles: make use of new var KERNEL_PATCHVER

replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>
SVN-Revision: 43047

broadcom_wl: eliminate compiler error with gcc-4.9-linaro

Attempting to build broadcom_wl (from trunk) with the linaro 4.9.x
toolchain produces the following errors:

<...>/wl_linux.c: In function 'wl_dump_ver':
<...>/wl_linux.c:2302:3: error: macro "__DATE__" might prevent reproducible builds [-Werror=date-time]
   __DATE__, __TIME__, EPI_VERSION_STR);
   ^
<...>/wl_linux.c:2302:13: error: macro "__TIME__" might prevent reproducible builds [-Werror=date-time]
   __DATE__, __TIME__, EPI_VERSION_STR);
             ^
cc1: some warnings being treated as errors

Remove the use of the __DATE__ and __TIME__ macros, as the info is not
really useful.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 43046

openssl: fix target definition for x86_64 (#18182)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43045

netifd: update to the latest version, fixes a use-after-free bug

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43044

kernel: allow targets to specify KERNEL_PATCHVER instead of LINUX_VERSION

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43043

gdb: fix build failure on arm

Signed-off-by: Nicolas Thill <nico@openwrt.org>
SVN-Revision: 43042

include: unbreak conffiles, postinst & prerm exports

Changeset r43017 reworked the ipkg control metadata generation but broke
the export of conffiles, postinst and prerm defines.

Change the code back to rely on shvar and shexport, this is required to
properly output multiline contents.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43041

linux: add kmod-i2c-piix4

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43040

netlogic: fix modular USB build

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43039

netlogic: add basic user-space support

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43038

netlogic: add XLR/XLP support

Add support for Broadcom/Netlogic XLR/XLP support

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43037

kernel: add a memmove() implementation for MIPS boot decompressor

This is required due to 306-mips_mem_functions_performance.patch, just
add a memmove() implementation to satisfy the lzma2 decompressor code.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43036

toolchain: fix mips64 musl linker names

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 43035

ath: process regulatory notifiers with CONFIG_ATH_USER_REGD set

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43034

ath10k: fix survey output channel in-use flag

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43033

ath9k: fix tx power reporting

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43032

bcm53xx: backport forgotten spi-nor change

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43031

bcm53xx: backport spi-nor patches from 3.18-rc1

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43030

ath9k: merge ar9580/ar955x initval updates

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43029

ath9k: merge a regulatory handling fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43028

linux: add kmod-hwmon-k10temp

This module is required to read the CPU core temperature sensors
on the Alix APU board.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 43027

ar71xx: add support for buffalo WZR-450HP2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43026

Revert "build: use ONESHELL to speed up scanning and the toplevel makefile"

This seems to cause issues on some build hosts, and it is not that
important.

SVN-Revision: 43025

kernel: use .ONESHELL to speed up processing of many kmod-* packages

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43024

build: only print skipped packages that were selected

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43023

kernel: use /bin/sh instead of bash to speed up processing of many kmod-* packages

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43022

build: use ONESHELL to speed up scanning and the toplevel makefile

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43021

include/shell.sh: remove getvar()

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43020

build: optimize target metadata dump

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43019

rules.mk: reduce shexport to one line to allow it to be put in a target context

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43018

build: clean up and optimize ipkg control generator code

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43017

build: do not process built-in rules for make subdirs

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43016

build: optimize printing of disabled packages

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43015

comgt: drop the use of the non-standard XCASE termios flag (#18186)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43014

nftables: bump to latest, fix minigmp

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43013

libnftnl: bump to latest

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 43012

ath9k: merge a fix for queue start/stop handling (fixes #18164, #18130)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43011

bcm53xx: add support for Asus RT-N18U LEDs & buttons

Got GPIOs from #18152 thanks to Grrruk

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43010

musl: fix getopt optional argument processing

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43009

bcm53xx: switch RT-N18U firmware to the UBI

According to the ticket #18152 it also uses NAND with 0x20000 erase size
and 0x800 page size.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43008

netifd: update to the latest version, fixes link status handling on VLAN devices (#18106)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43007

base-files: fix telnet login on musl

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43006

rpcd: add 802.11ac for iwinfo

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43005

binutils: remove linaro version string, it confuses gcc lto support detection

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43004

gcc: update 4.9 to linaro 2014.10

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 43003

openssl: host build fails when ccache is enabled

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 43002

hostapd: Add wpa_psk_file option to netifd.sh

The wpa_psk_file option offers the possibility to use a different WPA-PSK key for each client. The directive points to a file with the following syntax:

mac_address wpa_passphrase_or_hex_key

Example:

00:11:22:33:44:55 passphrase_for_client_1
00:11:22:33:44:67 passphrase_for_client_2
00:11:22:33:44:89 0123456789abcdef0123456789abcdef0123456789abcdef0123456789abcdef

So it is possible to specify both ASCII passphrases and raw 64-chars hex keys.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
SVN-Revision: 43001

fix compile against musl

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 43000

prereq-build: rename the openssl check to libssl, add back the old check - it is required after all

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42999

firmware-utils: rename encrypt()/decrypt() in mkhilinkfw to avoid collisions

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42998

Revert "openssl: add host build."

This reverts commit r42988

SVN-Revision: 42997

tools: revert faulty dependency on package stuff

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42996

prereq-build: replace the openssl command check with a check for headers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 42995

ramips: revert 1d5afc012e9d3eef0b113e1a89cff7508b731f90

the submitted patch was bogus

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 42994

ar71xx: unify usage of IMAGE_PROFILE instead of PROFILE.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42992

ramips: add comments for image/Makefile.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 42991