Remy Bohmer [Sun, 1 Feb 2009 11:27:53 +0000 (12:27 +0100)]
Compile warning fix in onenand_uboot.h
Regression since merge window after 2009.01
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Thu, 29 Jan 2009 05:33:55 +0000 (06:33 +0100)]
USB: Add EHCI support for VCT EHCI controller (really with driver now)
Somehow I missed the real driver part in my last patch version. This patch
now adds the driver.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Wolfgang Denk [Sun, 1 Feb 2009 20:38:07 +0000 (21:38 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Wolfgang Denk [Sun, 1 Feb 2009 20:31:37 +0000 (21:31 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-net
Wolfgang Denk [Sun, 1 Feb 2009 20:24:38 +0000 (21:24 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-ixp
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 08:10:48 +0000 (09:10 +0100)]
ixp: move serial to drivers/serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 08:04:58 +0000 (09:04 +0100)]
ixp: move pci init in arm/board instead of cpu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 07:56:49 +0000 (08:56 +0100)]
ixp: move pci drivers to drivers/pci
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 07:53:44 +0000 (08:53 +0100)]
ixp: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 07:53:44 +0000 (08:53 +0100)]
ixp: add missing os define
need by arm-elf toolchains and no impact on the arm-linux one
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 31 Jan 2009 08:53:39 +0000 (09:53 +0100)]
ixp: remove the option to include the Microcode
instead the board will have to load it from flash or ram
which will be specified by npe_ucode env var
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Fri, 30 Jan 2009 08:45:23 +0000 (09:45 +0100)]
ixp/npe: Move conditional compilation to Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:58:04 +0000 (21:58 +0100)]
SX1: add hardware V2 support
In the V2 the 2 flash has been replace by one 32MB flash
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:58:03 +0000 (21:58 +0100)]
SX1: Fix second flash mapping
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:58:03 +0000 (21:58 +0100)]
SX1: add CONFIG_STDOUT_USBTTY to enable preboot stdout redirect to usbtty
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Wed, 28 Jan 2009 20:57:59 +0000 (21:57 +0100)]
move Samsung's board to board/samsung
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 29 Jan 2009 11:07:21 +0000 (12:07 +0100)]
move ARM Ltd. to vendor dir
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Larry Johnson [Wed, 28 Jan 2009 20:30:37 +0000 (15:30 -0500)]
ppc4xx: Clean up configuration file for Korat board
This patch updates the default environmental variables for the
Korat PPC 440EPx board, and makes additional minor fixes.
Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Larry Johnson [Wed, 28 Jan 2009 20:30:02 +0000 (15:30 -0500)]
ppc4xx: Add variable "korat_usbcf" for Korat board
The new environment variable "korat_usbcf" selects the USB
port used by the Korat board's CompactFlash controller.
Signed-off-by: Larry Johnson <lrj@acm.org>
Signed-off-by: Stefan Roese <sr@denx.de>
Gunnar Rangoy [Fri, 23 Jan 2009 11:56:31 +0000 (12:56 +0100)]
AVR32: macb - Search for PHY id
This patch adds support for searching through available PHY-addresses in
the macb-driver. This is needed for the ATEVK1100 evaluation board,
where the PHY-address will be initialized to either 1 or 7.
This patch adds a config option, CONFIG_MACB_SEARCH_PHY, which when
enabled tells the driver to search for the PHY address.
Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
Signed-off-by: Olav Morken <olavmrk@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Olav Morken [Fri, 23 Jan 2009 11:56:26 +0000 (12:56 +0100)]
Fix IP alignment problem
This patch removes volatile from:
volatile IP_t *ip = (IP_t *)xip;
Due to a bug, avr32-gcc will assume that ip is aligned on a word boundary when
using volatile, which causes an exception since xip isn't aligned on a word
boundary.
Signed-off-by: Gunnar Rangoy <gunnar@rangoy.com>
Signed-off-by: Paul Driveklepp <pauldriveklepp@gmail.com>
Signed-off-by: Olav Morken <olavmrk@gmail.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Ron Madrid [Thu, 29 Jan 2009 00:17:21 +0000 (16:17 -0800)]
Marvell
88E1118 interrupt fix
This patch adjusts the LED control so that interrupt lines are not reading LEDs
and effectively causing indefinite interrupts to the controller.
Signed-off-by: Ron Madrid <ron_madrid@sbcglobal.net>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Stefan Roese [Wed, 21 Jan 2009 16:14:26 +0000 (17:14 +0100)]
net: smc911x.c: Add LAN9211 to chip_ids[] array
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Mike Frysinger [Tue, 27 Jan 2009 21:53:39 +0000 (16:53 -0500)]
Move is_valid_ether_addr() to include/net.h
Import the is_valid_ether_addr() function from the Linux kernel.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Michal Simek [Mon, 5 Jan 2009 11:25:13 +0000 (12:25 +0100)]
net: Sort Makefile labels
Signed-off-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Wolfgang Denk [Wed, 28 Jan 2009 22:14:22 +0000 (23:14 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
Wolfgang Denk [Wed, 28 Jan 2009 22:06:42 +0000 (23:06 +0100)]
85xx: Fix compile breakage with sbc8540 and sbc8560
This fixes an error which raises just a warning:
sbc8560.c:250: warning: passing argument 2 of 'strmhz' makes integer from pointer without a cast
Signed-off-by: Wolfgang Denk <wd@denx.de>
Mike Frysinger [Wed, 28 Jan 2009 18:48:55 +0000 (13:48 -0500)]
SPD823TS: do not define CONFIG_CMD_ENV
Since the SPD823TS board does not actually have any writable flash to save
its environment, undefine CONFIG_CMD_ENV so the "saveenv" command is
disabled.
This fixes the build error:
common/libcommon.a(cmd_nvedit.o): In function `do_saveenv':
common/cmd_nvedit.c:557: undefined reference to `saveenv'
make: *** [u-boot] Error 1
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Dirk Behme [Wed, 28 Jan 2009 20:40:16 +0000 (21:40 +0100)]
OMAP3: Add Zoom1 board support
Support for Zoom MDK with OMAP3430. Details of Zoom MDK available here:
http://www.logicpd.com/products/devkit/ti/zoom_mobile_development_kit
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Wed, 28 Jan 2009 20:39:58 +0000 (21:39 +0100)]
OMAP3: Add Pandora support
Add Pandora support.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Wed, 28 Jan 2009 20:39:58 +0000 (21:39 +0100)]
OMAP3: Add EVM board
Add EVM board support.
Signed-off-by: Manikandan Pillai <mani.pillai@ti.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Wed, 28 Jan 2009 20:39:57 +0000 (21:39 +0100)]
OMAP3: Add Overo board
Add Overo board support.
Signed-off-by: Steve Sakoman <sakoman@gmail.com>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Dirk Behme [Tue, 27 Jan 2009 17:19:12 +0000 (18:19 +0100)]
OMAP3: Add common power code, README, and BeagleBoard
Add BeagleBoard support, common power code and README.
Signed-off-by: Jason Kridner <jkridner@beagleboard.org>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Wolfgang Denk [Wed, 28 Jan 2009 20:09:46 +0000 (21:09 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Wolfgang Denk [Wed, 28 Jan 2009 20:09:32 +0000 (21:09 +0100)]
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
Kumar Gala [Wed, 28 Jan 2009 14:31:10 +0000 (08:31 -0600)]
85xx: Fix compile breakage with MPC8540EVAL
Configuring for MPC8540EVAL board...
mpc8540eval.c: In function 'checkboard':
mpc8540eval.c:53: error: invalid operands to binary /
make[1]: *** [mpc8540eval.o] Error 1
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Bryan Wu [Mon, 19 Jan 2009 04:04:27 +0000 (23:04 -0500)]
usb_scan_devices: fix output with no devices
We should check the return of usb_new_device() so that if no USB device is
found, we print out the right message rather than always saying "new usb
device found".
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Thu, 22 Jan 2009 09:11:21 +0000 (10:11 +0100)]
USB: Add high-speed (480Mb/s) to all USB related outputs
With this patch the USB related connection speed output ("usb tree" command and
debug output) is now high-speed enabled.
This patch also fixes a compilation warning when debugging is enabled.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:19 +0000 (17:12 +0100)]
USB: Add dcache support to the EHCI driver
This patch adds routines to handle (flush/invalidate) the dcache for the
QH and qTD structures and data buffers. This is needed on platforms using
this EHCI support with dcache enabled (like the MIPS VCT board port).
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:28 +0000 (17:12 +0100)]
USB: Add EHCI support for VCT EHCI controller
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:10 +0000 (17:12 +0100)]
USB: Add config option to call ehci_hcd_init() again after EHCI reset
This patch adds the config option CONFIG_EHCI_HCD_INIT_AFTER_RESET
to call ehci_hcd_init() again after ehci_reset() is executed. This
is needed for the upcoming VCT EHCI support which needs to re-init
the hcd part again after the EHCI CMD_RESET is executed.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Stefan Roese [Wed, 21 Jan 2009 16:12:01 +0000 (17:12 +0100)]
USB: Fix speed detection on EHCI cntr with root hub transaction translators
This patch fixes an issue that the speed of USB devices was not detected
correctly on some EHCI controllers. This will be used on the upcoming VCT
EHCI support.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:20 +0000 (09:41 +0530)]
usb : musb : Enabling USB MSC support for DM6446 (TI DaVinci) platform
Enabling USB MSC support for DM6446 (TI DaVinci) platform in the
configuration file.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:16 +0000 (09:41 +0530)]
usb : musb : Enabling DM6446 (TI DaVinci) USB module power
Enabling DM6446 (TI DaVinci) USB module power and MUSB low-level
controller hook up to USB core layer.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:13 +0000 (09:41 +0530)]
usb : musb : Adding DM6446 (TI DaVinci) platform specific USB support
Adding DM6446 (TI DaVinci) platform specific USB functionality for
USB Phy and VBUS initialization.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:09 +0000 (09:41 +0530)]
usb : musb : Adding USB VBUS enable functionality for DM644x DVEVM
Adding USB VBUS enable functionality for DM644x DVEVM (TI DaVinci)
platform.
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 04:11:03 +0000 (09:41 +0530)]
usb : musb : Adding host controller driver for Mentor USB controller
Adding Mentor USB core functionality and Mentor USB Host controller
functionality for Mentor USB OTG controller (musbhdrc).
Signed-off-by: Ravi Babu <ravibabu@ti.com>
Signed-off-by: Swaminathan S <swami.iyer@ti.com>
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Mike Frysinger [Thu, 1 Jan 2009 23:27:27 +0000 (18:27 -0500)]
usb.h: use standard __LITTLE_ENDIAN from Linux headers
Rather than forcing people to define a custom "LITTLEENDIAN", just use the
__LITTLE_ENDIAN one from the Linux byteorder headers that every arch is
already setting up.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Wed, 31 Dec 2008 09:33:56 +0000 (10:33 +0100)]
USB ehci ixp4xx support
Add USB ehci ixp4xx host controller. Test on ixdp465 board.
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Wed, 31 Dec 2008 09:33:22 +0000 (10:33 +0100)]
USB ehci remove infinite loop and use handshake function
USB ehci code cleanup. Use handshake instead of infinite while loop
to check the STD_ASS status
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Wed, 31 Dec 2008 09:32:41 +0000 (10:32 +0100)]
Add initial support for USB ehci pci
Add USB ehci pci support. This patch doesn't include any
pci_ids and it is not tested on real hardware.
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Bryan Wu [Fri, 2 Jan 2009 00:48:07 +0000 (19:48 -0500)]
usb_storage: do not reset SanDisk Corporation U3 Cruzer Micro USB thumb drive
The SanDisk Corporation U3 Cruzer Micro 1/4GB Flash Drive
000016244373FFB4
does not like to be reset, so check for it.
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Thomas Abraham [Sun, 4 Jan 2009 06:45:35 +0000 (12:15 +0530)]
usb : usb_kbd : Populating 'priv' member of USB keyboard device_t structure
This patch populates the 'priv' field of the USB keyboard device_t
structure. The 'priv' field is populated with the address of the
'struct usb_device' structure that represents the USB device.
The 'priv' field can then be used in the 'usb_event_poll' function to
determine the USB device that requires to be polled. An
example of its usage in 'usb_event_poll' function is as below.
device_t *dev;
struct usb_device *usb_kbd_dev;
<snip>
dev = device_get_by_name("usbkbd");
usb_kbd_dev = (struct usb_device *)dev->priv;
iface = &usb_kbd_dev->config.if_desc[0];
Signed-off-by: Thomas Abraham <t-abraham@ti.com>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Michael Trimarchi [Thu, 18 Dec 2008 09:05:37 +0000 (10:05 +0100)]
USB change speed
USB changes the speed according to the port status
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Remy Böhmer [Sat, 13 Dec 2008 21:51:58 +0000 (22:51 +0100)]
EHCI fix code and ixp4xx test.
USB ehci configuration parameter:
#define CONFIG_CMD_USB 1
#define CONFIG_USB_STORAGE 1
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_IXP4XX 1
#define CONFIG_EHCI_IS_TDI 1
#define CONFIG_EHCI_DESC_BIG_ENDIAN 1
#define CONFIG_EHCI_MMIO_BIG_ENDIAN 1
#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 2
#define CONFIG_LEGACY_USB_INIT_SEQ 1
2 USB Device(s) found
scanning bus for storage devices... 0 Storage Device(s) found
=> usb tree
Device Tree:
1 Hub (1.5MBit/s, 0mA)
| u-boot EHCI Host Controller
|
|+-2 Mass Storage (12MBit/s, 100mA)
Sony Storage Media
0C07040930296
=>
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
michael [Thu, 11 Dec 2008 12:43:55 +0000 (13:43 +0100)]
[PATCH] This patch add varius fix to the ehci.
- fix ehci_readl, ehci_writel
- introduce new define in ehci.h
- introduce the handshake function for waiting on a register
- fix usb_ehci_fsl with the new HC_LENGTH macro
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
michael [Wed, 10 Dec 2008 16:55:19 +0000 (17:55 +0100)]
[PATCH] Fix EHCI usb. I start to test on a
IXP465 board and I find some errors in the code. This
patch fix:
- descriptor initizialization (config, interface and endpoint
must be one next-to the other when the USB_DT_CONFIG message
is send.
- FIX little/endian bigendian (introduce the CONFIG_EHCI_DESC_BIG_ENDIAN
and the CONFIG_EHCI_MMIO_BIG_ENDIAN)
- Introduce the linux version of the usb_config_descriptor and
usb_interface descriptor. This descriptor does't contains
u-boot extension.
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Fri, 28 Nov 2008 12:22:09 +0000 (13:22 +0100)]
USB ehci freescale support
Add USB ehci freescale support
Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Fri, 28 Nov 2008 12:20:46 +0000 (13:20 +0100)]
USB ehci core support
Add USB ehci core support
Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Fri, 28 Nov 2008 12:19:19 +0000 (13:19 +0100)]
Prepare USB layer for ehci
Prepare USB layer for ehci support
Signed-off-by: Michael Trimarchi <trimarchi@gandalf.sssup.it>
Signed-off-by: Remy Böhmer <linux@bohmer.net>
Michael Trimarchi [Wed, 10 Dec 2008 14:52:06 +0000 (15:52 +0100)]
USB storage cleanup patch
Cleanup usb storage
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it>
Signed-off-by: Remy Bohmer <linux@bohmer.net>
Mike Frysinger [Sun, 12 Oct 2008 10:02:55 +0000 (06:02 -0400)]
Blackfin: fixup misc warnings such as printf's and missing casts
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 13 Oct 2008 02:09:26 +0000 (22:09 -0400)]
Blackfin: convert old boards to use COBJS-y Makefile style
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:38:37 +0000 (22:38 -0400)]
Blackfin: bf533-stamp: rewrite resource swap logic
The old swap function tended to clobber unrelated pins and screw up masks.
Rewrite the thing from scratch so it only uses the resources it needs.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:08:42 +0000 (22:08 -0400)]
Blackfin: bootldr: implement BF53x/BF56x LDR loader
The BF53x/BF56x parts do not have an on-chip ROM to boot LDRs out of
arbitrary memory locations, so implement a basic one in software.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:05:42 +0000 (22:05 -0400)]
Blackfin: implement real write support for OTP
Now that real documentation has been released for the OTP interface and
the on-chip ROM wrt writing/timings, implement support for reading/writing
as well as dumping/locking.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 02:04:05 +0000 (22:04 -0400)]
Blackfin: update on-chip ROM API
This brings the API for the on-chip ROM in line with the toolchain and
hardware documentation.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:52:17 +0000 (21:52 -0400)]
Blackfin: allow serial console to be disabled
Some devices have no UART device pulled out, so allow people to disable the
driver completely in favor of other methods (like JTAG-console).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:51:20 +0000 (21:51 -0400)]
Blackfin: support console-over-JTAG
The Blackfin JTAG has the ability to pass data via a back-channel without
halting the processor. Utilize that channel to emulate a console.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:49:06 +0000 (21:49 -0400)]
Blackfin: handle new anomalies with reset
Workaround fun new anomalies related to software reset of the processor.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:44:00 +0000 (21:44 -0400)]
Blackfin: pass RETX to Linux
Make sure we save the value of RETX at power on and then pass it on to the
kernel so that it can nicely debug a "double-fault-caused-a-reset" crash.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:40:26 +0000 (21:40 -0400)]
Blackfin: clarify relocation comment during init
People often ask questions about the init process and when things go
from flash to relocated base, so clarify the comments a bit.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:23:41 +0000 (21:23 -0400)]
Blackfin: just set SP register directly during init
No need to set the SP register indirectly to the configured value when it
can be set directly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 01:15:53 +0000 (21:15 -0400)]
Blackfin: add portmuxing for UARTs on the BF51x
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 1 Jun 2008 05:26:29 +0000 (01:26 -0400)]
Blackfin: respect CONFIG_CLKIN_HALF
As pointed out by Ivan Koryakovskiy, the initialization code was not
actually respecting the CONFIG_CLKIN_HALF option when configuring the
PLL_CTL register.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 1 Jun 2008 05:21:34 +0000 (01:21 -0400)]
Blackfin: use common memcpy routine during init
Rather than using a local custom memcpy function, just call the existing
optimized Blackfin version.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 9 Apr 2008 06:27:06 +0000 (02:27 -0400)]
Blackfin: set default boot SPI CS for BF538/BF539
The BF538/BF539 use CS2 for booting off of rather than CS1 like newer
Blackfin parts.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 9 Apr 2008 06:20:59 +0000 (02:20 -0400)]
Blackfin: punt unused BF533-STAMP definitions
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sat, 19 Apr 2008 00:44:11 +0000 (20:44 -0400)]
Blackfin: resurrect BF533-STAMP video splash driver
This video driver used to live in the Blackfin cpu directory, but it was
lost during the unification process. This brings it back.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 9 Apr 2008 06:31:29 +0000 (02:31 -0400)]
Blackfin: tighten up post memory coding style
No functional changes here; just cleanup code style a bit.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 9 Apr 2008 06:29:18 +0000 (02:29 -0400)]
Blackfin: bf537-stamp nand: fix more style errors in previous commit
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 00:31:17 +0000 (20:31 -0400)]
Blackfin: drop dead/wrong debug code in initdram()
The DEBUG code in initdram() is quite old and was never really useful, so
just drop it altogether. Common Blackfin debug code does a better job.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Sun, 12 Oct 2008 00:30:28 +0000 (20:30 -0400)]
Blackfin: bf533-ezkit: shuffle flash defines a little
Some of the flash defines weren't in the correct location and caused build
problems in some configurations, so let's move types and defines to better
local locations.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 6 Oct 2008 08:16:47 +0000 (04:16 -0400)]
Blackfin: overhaul i2c driver
The current Blackfin i2c driver does not work properly with certain devices
due to it breaking up transfers incorrectly. This is a rewrite of the
driver and relocates it to the newer place in the source tree.
Also remove duplicated I2C speed defines in Blackfin board configs and
disable I2C slave address usage since it isn't implemented.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 6 Oct 2008 08:00:07 +0000 (04:00 -0400)]
Blackfin: respect CONFIG_SYS_MONITOR_LEN for default flash protection
Respect the CONFIG_SYS_MONITOR_LEN define rather than assuming a size of
128kB when setting up the default flash protection region for U-Boot
itself.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 6 Oct 2008 07:57:39 +0000 (03:57 -0400)]
Blackfin: respect/check CONFIG_SYS_GBL_DATA_SIZE
When setting up the global data, rather than relying on sizeof(), use the
common CONFIG_SYS_GBL_DATA_SIZE define.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 6 Oct 2008 07:52:24 +0000 (03:52 -0400)]
Blackfin: implement general support for CONFIG_STATUS_LED
Here are the Blackfin-specific and board-independent pieces for status leds.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 6 Oct 2008 07:49:32 +0000 (03:49 -0400)]
Blackfin: do not init i2c in Blackfin board init
The common code takes care of calling i2c_init() when needed, so no point
in us doing it as well.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 6 Oct 2008 07:42:20 +0000 (03:42 -0400)]
Blackfin: bfin_mac: update port muxing
Adds support more Blackfin parts and fixes broken muxing for older ones.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Mon, 6 Oct 2008 07:35:44 +0000 (03:35 -0400)]
Blackfin: fix dcache handling when doing dma memcpy's
Our dcache invalidate function doesn't just invalidate, it also flushes.
So rename the function accordingly and fix the dma_memcpy() function so it
doesn't inadvertently corrupt the data destination.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 22:56:56 +0000 (18:56 -0400)]
Blackfin: dont generate ldrs with --force
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 22:55:30 +0000 (18:55 -0400)]
Blackfin: pass --bmode/--initcode when creating ldr
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 22:39:27 +0000 (18:39 -0400)]
Blackfin: minimize time cache is turned off when replacing cplb entries
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 19:31:13 +0000 (15:31 -0400)]
Blackfin: split cache handling out of dma_memcpy()
Creating a new dma_memcpy() function that skips all cache checks allows us
to use the function in very early init where the cache is not yet setup.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 19:30:49 +0000 (15:30 -0400)]
Blackfin: abort dma_memcpy() for L1 scratchpad
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 19:27:52 +0000 (15:27 -0400)]
Blackfin: rename bootm.c to boot.c
The boot file contains functions for more than just "bootm", so rename it
accordingly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 17:22:37 +0000 (13:22 -0400)]
Blackfin: set more sane default board config values
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 19:24:59 +0000 (15:24 -0400)]
Blackfin: convert CMD_LINE_ADDR to CONFIG_LINUX_CMDLINE_{ADDR,SIZE}
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 17:21:27 +0000 (13:21 -0400)]
Blackfin: add bit defines for DDR parts
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Thu, 7 Aug 2008 17:21:11 +0000 (13:21 -0400)]
Blackfin: add defines to describe active bootrom behavior
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
projects / oweals / u-boot.git / log