librecmc/librecmc.git
8 years agobcm53xx: rename PHY patches to use 07* prefix
Rafał Miłecki [Sun, 14 Aug 2016 09:21:48 +0000 (11:21 +0200)]
bcm53xx: rename PHY patches to use 07* prefix

This is not a strict rule but it matches better this one:
7xx - network / phy driver patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agomvebu: add ClearFog .tar.gz bundle
Jo-Philipp Wich [Thu, 11 Aug 2016 15:20:54 +0000 (17:20 +0200)]
mvebu: add ClearFog .tar.gz bundle

The previous image building code rework removed the rootfs.tar.gz with embedded
kernel and dtb build artifact which is required to build suitable SD images.

Reintroduce a .tar.gz artifact locally which embeds kernel and dtb, similar to
how the old code handled it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agokernel: backport upstream challenge ACK fix (CVE-2016-5696)
Jo-Philipp Wich [Sat, 13 Aug 2016 13:17:42 +0000 (15:17 +0200)]
kernel: backport upstream challenge ACK fix (CVE-2016-5696)

Yue Cao claims that current host rate limiting of challenge ACKS
(RFC 5961) could leak enough information to allow a patient attacker
to hijack TCP sessions. He will soon provide details in an academic
paper.

Backports upstream commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758
to the used LEDE kernel versions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobrcm63xx: switch to board based failsafe networking
Jonas Gorski [Sat, 13 Aug 2016 11:53:06 +0000 (13:53 +0200)]
brcm63xx: switch to board based failsafe networking

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: configure switch in failsafe
Jonas Gorski [Thu, 28 Jul 2016 22:25:09 +0000 (00:25 +0200)]
base-files: configure switch in failsafe

Also configure the switch based on the failsafe config, and create the
failsafe interface as tagged if necessary.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: allow failsafe to configure vlans
Jonas Gorski [Thu, 28 Jul 2016 22:23:55 +0000 (00:23 +0200)]
base-files: allow failsafe to configure vlans

In preparation of properly setting up vlans and switches, add
support for configuring failsafe on a vlan tagged interface.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: add preinit ifname detection based on board.json
Jonas Gorski [Thu, 28 Jul 2016 20:58:59 +0000 (22:58 +0200)]
base-files: add preinit ifname detection based on board.json

Make use of the existing board.d to autodetect lan ifname in a generic way.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: split out preinit interface config
Jonas Gorski [Fri, 12 Aug 2016 14:47:25 +0000 (16:47 +0200)]
base-files: split out preinit interface config

Move preinit interface and ip config to its own function to allow
calling it from more than one place.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: board_detect: allow specifying the generated file
Jonas Gorski [Sat, 13 Aug 2016 12:04:23 +0000 (14:04 +0200)]
base-files: board_detect: allow specifying the generated file

Allow passing a filename to change the location of the generated
board.json.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: let config_generate call board_detect
Jonas Gorski [Sat, 13 Aug 2016 12:04:23 +0000 (14:04 +0200)]
base-files: let config_generate call board_detect

Instead of board_detect generating the config as a side effect, let
config_generate call board_detect as needed.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobrcm63xx: backport mtd of node changes from upstream
Jonas Gorski [Tue, 9 Aug 2016 09:23:32 +0000 (11:23 +0200)]
brcm63xx: backport mtd of node changes from upstream

Should fix parser data containing uninitialized values for of probed
physmap flashes, which could break e.g. the redboot parser.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agokernel: check SOURCE_DATE_EPOCH before setting KBUILD_BUILD_TIMESTAMP
Jonas Gorski [Sat, 13 Aug 2016 13:47:48 +0000 (15:47 +0200)]
kernel: check SOURCE_DATE_EPOCH before setting KBUILD_BUILD_TIMESTAMP

Make sure SOURCE_DATE_EPOCH actually contains something.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agokernel: allow reproducable builds
Jonas Gorski [Sat, 13 Aug 2016 09:29:46 +0000 (11:29 +0200)]
kernel: allow reproducable builds

Similar how we fix the file times in the filesystems, fix the build time
of the kernel, and make the build number static. This should allow the
kernel build to be reproducable when combined with setting the
KERNEL_BUILD_USER and _DOMAIN in case of different machines.

The reproducability only applies to non-initramfs kernels, those still
require additional changes.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agodropbear: security update to 2016.74
Jo-Philipp Wich [Fri, 12 Aug 2016 09:44:07 +0000 (11:44 +0200)]
dropbear: security update to 2016.74

- Security: Message printout was vulnerable to format string injection.

  If specific usernames including "%" symbols can be created on a system
  (validated by getpwnam()) then an attacker could run arbitrary code as root
  when connecting to Dropbear server.

  A dbclient user who can control username or host arguments could potentially
  run arbitrary code as the dbclient user. This could be a problem if scripts
  or webpages pass untrusted input to the dbclient program.

- Security: dropbearconvert import of OpenSSH keys could run arbitrary code as
  the local dropbearconvert user when parsing malicious key files

- Security: dbclient could run arbitrary code as the local dbclient user if
  particular -m or -c arguments are provided. This could be an issue where
  dbclient is used in scripts.

- Security: dbclient or dropbear server could expose process memory to the
  running user if compiled with DEBUG_TRACE and running with -v

  The security issues were reported by an anonymous researcher working with
  Beyond Security's SecuriTeam Secure Disclosure www.beyondsecurity.com/ssd.html

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agomwlwifi: upgrade to 10.3.0.18-20160804
Imre Kaloz [Thu, 11 Aug 2016 13:51:55 +0000 (15:51 +0200)]
mwlwifi: upgrade to 10.3.0.18-20160804

adds support for the Linksys WRT1900ACSv2 and WRT1200ACv2

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
8 years agokernel: add missing config symbol
Felix Fietkau [Thu, 11 Aug 2016 16:32:51 +0000 (18:32 +0200)]
kernel: add missing config symbol

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agooxnas: set preinit network interface
Daniel Golle [Thu, 11 Aug 2016 09:36:08 +0000 (11:36 +0200)]
oxnas: set preinit network interface

set network interface for failsafe mode to eth0 for all boards

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agoramips: fix legacy image build
Felix Fietkau [Thu, 11 Aug 2016 15:00:36 +0000 (17:00 +0200)]
ramips: fix legacy image build

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: fix crashlog issues on highmem systems
Felix Fietkau [Thu, 11 Aug 2016 15:02:32 +0000 (17:02 +0200)]
kernel: fix crashlog issues on highmem systems

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agobcm53xx: add profiles for Buffalo devices
Rafał Miłecki [Thu, 11 Aug 2016 10:17:06 +0000 (12:17 +0200)]
bcm53xx: add profiles for Buffalo devices

This generates proper images when using CONFIG_TARGET_MULTI_PROFILE and
CONFIG_TARGET_PER_DEVICE_ROOTFS.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: include USB modules in images for devices with USB ports
Rafał Miłecki [Thu, 11 Aug 2016 09:59:28 +0000 (11:59 +0200)]
bcm53xx: include USB modules in images for devices with USB ports

This allows using USB out of the box.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: add profiles for all other (SoftMAC) devices
Rafał Miłecki [Thu, 11 Aug 2016 06:59:54 +0000 (08:59 +0200)]
bcm53xx: add profiles for all other (SoftMAC) devices

Thanks to this images for SoftMAC devices don't get brcmfmac anymore and
b43 is added for devices with (quite poor) support only.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agoath10k-firmware: Update to latest 99X0 CT firmware.
Ben Greear [Wed, 10 Aug 2016 22:46:16 +0000 (15:46 -0700)]
ath10k-firmware: Update to latest 99X0 CT firmware.

Among other things, this compiles out support for peer caching.
The feature did not seem to work well in my testing of AP mode,
and totally breaks my own special use of station mode.

Briefly tested on ea8500.

Signed-off-by: Ben Greear <greearb@candelatech.com>
8 years agoath10k-ct: Fix loading 9980 firmware.
Ben Greear [Wed, 10 Aug 2016 22:45:53 +0000 (15:45 -0700)]
ath10k-ct: Fix loading 9980 firmware.

ath10k-ct driver was using bad defaults for 9980 if user
had not specified a fwcfg file to over-ride them.

Also, support configurable station-kickout-threshold,
which might work around issues with flakey connections.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [fix PKG_VERSION]
8 years agotools: flock: add NFSv4 compatibility
Mathias Kresin [Tue, 9 Aug 2016 06:22:24 +0000 (08:22 +0200)]
tools: flock: add NFSv4 compatibility

This patch fixes the LEDE build on mounted NFSv4 shares.

The lock file cannot be opened in read-write mode by default, because
then we cannot use flock(1) to lock executable files.

The read-write mode for lock files is necessary on NFSv4 where
flock(2) is emulated by by fcntl() -- this situation is possible to
detect by flock(2) EBADF error.

The patch consist of the following util-linux/flock commits

http://git.kernel.org/cgit/utils/util-linux/util-linux.git/commit/?id=eb742a1f66d5e3a7c5b43efce741c113f51bef3b

http://git.kernel.org/cgit/utils/util-linux/util-linux.git/commit/?id=caf1ba11a367ad702fb774653daf9ebdcca49d7b

without including the pre kernel 3.4 support.

Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [minor cleanup]
8 years agogcc: optionally build gccgo compiler
Matteo Croce [Fri, 15 Jul 2016 10:17:20 +0000 (12:17 +0200)]
gcc: optionally build gccgo compiler

Tested with eglibc on x86 and armv7 so far

Signed-off-by: Matteo Croce <matteo.croce@canonical.com>
8 years agokernel: add plan 9 fs package
Matteo Croce [Wed, 22 Jun 2016 13:15:10 +0000 (15:15 +0200)]
kernel: add plan 9 fs package

9pfs is used by kvm to share files between host and guest,
add proper config option to enable it.

Signed-off-by: Matteo Croce <matteo.croce@canonical.com>
8 years agohostapd: Allow RADIUS accounting without 802.1x
Petko Bordjukov [Thu, 4 Aug 2016 23:10:00 +0000 (02:10 +0300)]
hostapd: Allow RADIUS accounting without 802.1x

RADIUS accounting can be used even when RADIUS authentication is not
used. Move the accounting configuration outside of the EAP-exclusive
sections.

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
8 years agolantiq: fix some ethernet driver SMP issues
Felix Fietkau [Thu, 4 Aug 2016 10:39:06 +0000 (12:39 +0200)]
lantiq: fix some ethernet driver SMP issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agobcm53xx: convert (disabled) Netgear R8500 image to own profile
Rafał Miłecki [Thu, 11 Aug 2016 06:27:57 +0000 (08:27 +0200)]
bcm53xx: convert (disabled) Netgear R8500 image to own profile

It should be the last device with FullMAC chipset to convert.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: add profile with brcmfmac for Netgear R7900
Rafał Miłecki [Thu, 11 Aug 2016 05:45:19 +0000 (07:45 +0200)]
bcm53xx: add profile with brcmfmac for Netgear R7900

It's one more device with FullMAC that got forgotten in the previous
commit.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: add profiles for devices with FullMAC chipsets
Rafał Miłecki [Wed, 10 Aug 2016 17:23:35 +0000 (19:23 +0200)]
bcm53xx: add profiles for devices with FullMAC chipsets

This allows building images for selected devices with brcmfmac only
(without b43 which is for SoftMAC devices).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Jo-Philipp Wich <jo@mein.io>
8 years agoramips: Add support for Thunder Timecloud
Chuanhong Guo [Wed, 10 Aug 2016 00:18:32 +0000 (02:18 +0200)]
ramips: Add support for Thunder Timecloud

Thunder Timecloud is a small NAS with MT7621A. It has 1 USB port and an
SD Card slot. There is no wireless cards.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
8 years agopreinit: use only the image config options
Mathias Kresin [Sun, 7 Aug 2016 20:21:34 +0000 (22:21 +0200)]
preinit: use only the image config options

The pi_* variables and the fs_failsafe_wait_timeout variable are set by
the CONFIG_TARGET_PREINIT_* config options. No need to maintain the same
values twice.

All other fs_ variables were never used.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agoltq-hcd: fix xway dependency
Mathias Kresin [Sun, 7 Aug 2016 20:23:24 +0000 (22:23 +0200)]
ltq-hcd: fix xway dependency

Due to missing parameter the package wasn't build for the xway target.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agokernel: adm6996: set carrier status
Mathias Kresin [Tue, 9 Aug 2016 06:11:45 +0000 (08:11 +0200)]
kernel: adm6996: set carrier status

Due to the missing carrier status set, the interface wasn't usable on a
BTHOMEHUB2B after ip link down and up as it is done in preinit.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agoramips: Add support for TEW-714TRU
Jimmy Zhong [Wed, 3 Aug 2016 17:58:01 +0000 (13:58 -0400)]
ramips: Add support for TEW-714TRU

Signed-off-by: Jimmy Zhong <mb300sd@mb300sd.net>
8 years agolantiq: enable cpu temp driver for selected boards
Mathias Kresin [Sat, 6 Aug 2016 08:34:53 +0000 (10:34 +0200)]
lantiq: enable cpu temp driver for selected boards

According to the author of the cpu temp driver, not all xrx200 boards
have a cpu temperature sensor. For that reason enable the sensor only
for tested boards.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agolantiq: board.d: set lan mac address only where necessary
Mathias Kresin [Tue, 2 Aug 2016 20:27:16 +0000 (22:27 +0200)]
lantiq: board.d: set lan mac address only where necessary

Do not set the lan mac address for boards which having the lan mac
address already set in device tree source file.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agolantiq: drop duplicate and now unused "lantiq, eth-mac" binding
Mathias Kresin [Tue, 2 Aug 2016 20:26:02 +0000 (22:26 +0200)]
lantiq: drop duplicate and now unused "lantiq, eth-mac" binding

The device tree binding and the associated code duplicates functionality
already patched into the etop driver. The compatible string isn't used
any more. Therefore the whole code can be dropped.

The "mac-increment" property allowed to increment a mac address received
via kernel cmdline. This functionality isn't used by any device and
should be added as etop driver device tree property if required again.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agolantiq: use the etop driver DT bindings only
Mathias Kresin [Tue, 2 Aug 2016 20:26:01 +0000 (22:26 +0200)]
lantiq: use the etop driver DT bindings only

Use the generic mtd-mac-address dts property to get a mac address from
flash instead of the lantiq specific one.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agolantiq: fix mac address increments
Mathias Kresin [Tue, 2 Aug 2016 20:26:00 +0000 (22:26 +0200)]
lantiq: fix mac address increments

Use the same mac address increment in device tree source file and
userspace.

Don't add a mac address increment to either the only mtd mac-address or
to all mac-addresses.

Fix a typo in the TDW89X0.dtsi file to add an increment.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agolantiq: drop orphaned eeprom-handling code branches
Mathias Kresin [Tue, 2 Aug 2016 20:25:59 +0000 (22:25 +0200)]
lantiq: drop orphaned eeprom-handling code branches

All device tree nodes are using the named properties now and the code
path handling the reg property isn't required any more.

The code related to the ath,eep-flash property has been reformatted to
be better readable.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agolantiq: use ath, eep-flash/mac-offset for ath eep nodes
Mathias Kresin [Tue, 2 Aug 2016 20:25:58 +0000 (22:25 +0200)]
lantiq: use ath, eep-flash/mac-offset for ath eep nodes

No functional change, just easier to get what's the purpose of the hex
values.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agoath25: fix duplicate LZMA compression
Jo-Philipp Wich [Tue, 9 Aug 2016 15:23:56 +0000 (17:23 +0200)]
ath25: fix duplicate LZMA compression

The conversion to the new image building code accidentally caused the kernel
image to get compressed twice, leading to boot failures when kernel and rootfs
are flashed separately.

The sysupgrade images have been unaffected by this. Also restore the elf
kernel build artifact while we're at it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoopenssl: re-enable CMAC support
Felix Fietkau [Tue, 9 Aug 2016 05:17:58 +0000 (07:17 +0200)]
openssl: re-enable CMAC support

Needed by a few packages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agouclient: change SSL support error message
Jo-Philipp Wich [Sat, 30 Jul 2016 13:41:10 +0000 (15:41 +0200)]
uclient: change SSL support error message

Change the error message about missing SSL support to be more explicit by
mentioning required package names.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoramips: switch from 24kec to 24kc
Jonas Gorski [Mon, 8 Aug 2016 09:27:04 +0000 (11:27 +0200)]
ramips: switch from 24kec to 24kc

Since the only difference between 24Kec and 24Kc is the addition of DSP
ASE support, and we don't use it anymore, there is no need to keep 24Kec
as a separate cpu type.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agomac80211: Update the regdb to master-2016-06-10
Petko Bordjukov [Sun, 7 Aug 2016 20:45:33 +0000 (23:45 +0300)]
mac80211: Update the regdb to master-2016-06-10

Changes include:

* Higher maximum transmit power in the 5170-5250 band of the BG
  regdomain
* Introduction of the CU regdomain
* Introduction of the 5725-5875 band (short-range devices) in the DE
  regdomain
* Introduction of 60 GHz channels 1-4 in the KR regdomain
* Introduction of the 5725-5875 band (short-range devices) in the NL
  regdomain

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>
8 years agokernel: make the kernel build auto-clean the build dir like package builds
Felix Fietkau [Fri, 5 Aug 2016 12:08:47 +0000 (14:08 +0200)]
kernel: make the kernel build auto-clean the build dir like package builds

Previous behavior can be restored by using QUILT=1 on target/prepare

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agohostapd: remove unused hostapd-common-old package
Felix Fietkau [Fri, 5 Aug 2016 09:02:50 +0000 (11:02 +0200)]
hostapd: remove unused hostapd-common-old package

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoath9k: improve powersave filter handling
Felix Fietkau [Tue, 2 Aug 2016 10:21:37 +0000 (12:21 +0200)]
ath9k: improve powersave filter handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoath9k: improve performance in tx status handling
Felix Fietkau [Tue, 2 Aug 2016 10:21:27 +0000 (12:21 +0200)]
ath9k: improve performance in tx status handling

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoRevert "kernel: remove long obsolete gpio spi controller driver patch"
Felix Fietkau [Thu, 4 Aug 2016 21:09:55 +0000 (23:09 +0200)]
Revert "kernel: remove long obsolete gpio spi controller driver patch"

This reverts commit 9e62a7668c4085563a907da51a08819c88d04f33.

8 years agoar71xx: add missing LZO support select for routerboard devices
Felix Fietkau [Thu, 4 Aug 2016 20:55:51 +0000 (22:55 +0200)]
ar71xx: add missing LZO support select for routerboard devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2
Felix Fietkau [Thu, 4 Aug 2016 20:42:28 +0000 (22:42 +0200)]
kernel: add -mtune=34kc to MIPS CFLAGS when building for mips32r2

This provides a good tradeoff across at least 24Kc-74Kc, while also
producing smaller code.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agogcc: add a patch to generate better code with Os on mips
Felix Fietkau [Thu, 4 Aug 2016 18:29:45 +0000 (20:29 +0200)]
gcc: add a patch to generate better code with Os on mips

Also happens to reduce compressed code size a bit

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: mark compression modules as hiddden to obsolete the compressor kconfig hack
Felix Fietkau [Thu, 4 Aug 2016 17:23:47 +0000 (19:23 +0200)]
kernel: mark compression modules as hiddden to obsolete the compressor kconfig hack

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: mark kmod-udptunnel as hiddden to replace the NET_UDP_TUNNEL kconfig hack
Felix Fietkau [Thu, 4 Aug 2016 17:19:17 +0000 (19:19 +0200)]
kernel: mark kmod-udptunnel as hiddden to replace the NET_UDP_TUNNEL kconfig hack

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: remove unused morse led trigger driver
Felix Fietkau [Thu, 4 Aug 2016 17:12:21 +0000 (19:12 +0200)]
kernel: remove unused morse led trigger driver

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: remove long obsolete gpio spi controller driver patch
Felix Fietkau [Thu, 4 Aug 2016 17:01:20 +0000 (19:01 +0200)]
kernel: remove long obsolete gpio spi controller driver patch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: remove a long obsolete unlzo decompressor fix
Felix Fietkau [Thu, 4 Aug 2016 16:54:16 +0000 (18:54 +0200)]
kernel: remove a long obsolete unlzo decompressor fix

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: remove obsolete slab tuning patch
Felix Fietkau [Thu, 4 Aug 2016 16:41:50 +0000 (18:41 +0200)]
kernel: remove obsolete slab tuning patch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: remove esfq qdisc
Felix Fietkau [Thu, 4 Aug 2016 16:18:39 +0000 (18:18 +0200)]
kernel: remove esfq qdisc

It has been obsolete for years now

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agosysupgrade: unmount filesystems before reboot
Mathias Kresin [Tue, 2 Aug 2016 20:29:31 +0000 (22:29 +0200)]
sysupgrade: unmount filesystems before reboot

sysupgrade immediately reboots after flashing an image and doesn't
allow to unmount filesystems. At least in case the image used for
sysupgrade is stored on a FAT formatted usb flash drive, the following
warning is printed during the next mount of the flash drive:

FAT-fs (sda1): Volume was not properly unmounted. Some data may be
corrupt. Please run fsck.

Although a data corruption during read operations is unlikely, there is
no need to scare the users.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agotools: lzma: reduce copyright noise
Sergey Ryazanov [Tue, 2 Aug 2016 13:29:44 +0000 (16:29 +0300)]
tools: lzma: reduce copyright noise

Move the copyright printing code to the usage printing function, to
reduce noise from regular execution but preserve information about
the author.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
8 years agobase-files: remove dead code
Daniel Golle [Tue, 2 Aug 2016 13:38:46 +0000 (15:38 +0200)]
base-files: remove dead code

/etc/init.d/boot tried to create /dev/root based on the kernel's
cmdline which won't work on any recent targets. Remove that code now
that fstools can detect the mounted rootfs based on
/proc/self/mountinfo and /dev/root was long gone anyway.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agoimage: fix per-device rootfs build error when not all opkg package files are found
Felix Fietkau [Thu, 4 Aug 2016 09:12:27 +0000 (11:12 +0200)]
image: fix per-device rootfs build error when not all opkg package files are found

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoscripts/config: properly handle select on symbols with unmet direct dependencies
Felix Fietkau [Wed, 3 Aug 2016 17:55:02 +0000 (19:55 +0200)]
scripts/config: properly handle select on symbols with unmet direct dependencies

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoscripts/config: sync with latest linux upstream
Felix Fietkau [Wed, 3 Aug 2016 17:47:34 +0000 (19:47 +0200)]
scripts/config: sync with latest linux upstream

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: clean up 260-crypto_test_dependencies.patch to get rid of some more kernel...
Felix Fietkau [Wed, 3 Aug 2016 15:34:04 +0000 (17:34 +0200)]
kernel: clean up 260-crypto_test_dependencies.patch to get rid of some more kernel bloat

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: modularize bridge netfilter support a bit further to get rid of some kernel...
Felix Fietkau [Wed, 3 Aug 2016 15:07:32 +0000 (17:07 +0200)]
kernel: modularize bridge netfilter support a bit further to get rid of some kernel bloat

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: remove switch driver kmod packages
Felix Fietkau [Wed, 3 Aug 2016 14:38:04 +0000 (16:38 +0200)]
kernel: remove switch driver kmod packages

Targets that need switch drivers should select them in their kernel
config. This prevents some bloat from creeping into targets that don't
need switchdev/dsa

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoramips: enable nand support for mt7621
John Crispin [Wed, 3 Aug 2016 13:29:59 +0000 (15:29 +0200)]
ramips: enable nand support for mt7621

this makes sysupgrade work on the ERX

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoinclude/image.mk: allow image code to override uImage name
John Crispin [Wed, 3 Aug 2016 00:30:12 +0000 (02:30 +0200)]
include/image.mk: allow image code to override uImage name

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoramips: updated remaining profiles to the new image building code
John Crispin [Tue, 2 Aug 2016 17:48:17 +0000 (19:48 +0200)]
ramips: updated remaining profiles to the new image building code

Signed-off-by: John Crispin <john@phrozen.org>
8 years agox86: enable CPU frequency scaling
Lucian Cristian [Sun, 31 Jul 2016 14:59:01 +0000 (17:59 +0300)]
x86: enable CPU frequency scaling

CPU frequency scaling enables the operating system to scale the CPU
frequency up or down in order to save power. CPU frequencies can be
scaled automatically depending on the system load, in response to ACPI
events, or manually by userspace programs.

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
8 years agolinux/modules: Add SCH5627 Super I/O chips
Lucian Cristian [Sun, 31 Jul 2016 12:42:53 +0000 (15:42 +0300)]
linux/modules: Add SCH5627 Super I/O chips

Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
8 years agolantiq: add cpu temperatur sensor driver for xrx200
Florian Eckert [Mon, 1 Aug 2016 09:10:42 +0000 (11:10 +0200)]
lantiq: add cpu temperatur sensor driver for xrx200

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
8 years agortc-rv5c386a: package does not build inside the SDK
John Crispin [Tue, 2 Aug 2016 07:34:49 +0000 (09:34 +0200)]
rtc-rv5c386a: package does not build inside the SDK

the packages failed to build inside the SDK due to missing header
files.

Signed-off-by: John Crispin <john@phrozen.org>
8 years agouboot-lantiq: package does not build inside the SDK
John Crispin [Tue, 2 Aug 2016 07:31:55 +0000 (09:31 +0200)]
uboot-lantiq: package does not build inside the SDK

the packages failed to build inside the SDK due to missing ethernet
firmware files.

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobuild: remove MIPS dsp/dsp2 CPU_SUBTYPE
Felix Fietkau [Wed, 3 Aug 2016 12:56:43 +0000 (14:56 +0200)]
build: remove MIPS dsp/dsp2 CPU_SUBTYPE

There does not seem to be any meaningful difference in generated code.
This will save some time and space on snapshot builds

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agobuild: move merged package directory from bin/ to staging_dir
Felix Fietkau [Wed, 3 Aug 2016 10:22:04 +0000 (12:22 +0200)]
build: move merged package directory from bin/ to staging_dir

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agomkelfimage: remove package, it is a host tool that has been unused for years
Felix Fietkau [Tue, 2 Aug 2016 11:54:40 +0000 (13:54 +0200)]
mkelfimage: remove package, it is a host tool that has been unused for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoar71xx: remove useless minimal/ath5k profiles
Felix Fietkau [Tue, 2 Aug 2016 11:51:13 +0000 (13:51 +0200)]
ar71xx: remove useless minimal/ath5k profiles

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agouboot-ar71xx: fix default selection for NBG460N/550N/550NH
Felix Fietkau [Tue, 2 Aug 2016 11:49:27 +0000 (13:49 +0200)]
uboot-ar71xx: fix default selection for NBG460N/550N/550NH

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agomac80211: fix minor memleak on AP restart / warning on driver unload
Felix Fietkau [Tue, 2 Aug 2016 09:14:55 +0000 (11:14 +0200)]
mac80211: fix minor memleak on AP restart / warning on driver unload

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoath9k: fix sta initialization bug leading to stability issues
Felix Fietkau [Tue, 2 Aug 2016 11:07:46 +0000 (13:07 +0200)]
ath9k: fix sta initialization bug leading to stability issues

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoomap: remove CONFIG_SND_DEBUG override
Felix Fietkau [Tue, 2 Aug 2016 06:17:28 +0000 (08:17 +0200)]
omap: remove CONFIG_SND_DEBUG override

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: add missing config symbol
Felix Fietkau [Tue, 2 Aug 2016 06:16:44 +0000 (08:16 +0200)]
kernel: add missing config symbol

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agofeeds: switch from github to lede-project.org mirrors
Felix Fietkau [Mon, 1 Aug 2016 20:33:29 +0000 (22:33 +0200)]
feeds: switch from github to lede-project.org mirrors

GitHub seems to be a bit unreliable on feeds updates on the buildbot
lately, so hopefully our own mirror will be more reliable than that.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agogdb: fix build with gcc 4.1.2 as host compiler
Hauke Mehrtens [Mon, 1 Aug 2016 20:25:54 +0000 (22:25 +0200)]
gdb: fix build with gcc 4.1.2 as host compiler

The additional warnings are causing compile errors on gcc version 4.1.2
as a host compiler.

cc -c  -Wall -Wdeclaration-after-statement -Wpointer-arith
-Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch
-Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement
-Wempty-body -Wmissing-parameter-type -Wold-style-declaration -Wold-
style-definition -Wformat-nonliteral  -I. -I. -I./../../include
filter_host.c
cc1: error: unrecognized command line option "-Wempty-body"
cc1: error: unrecognized command line option "-Wmissing-parameter-type"
cc1: error: unrecognized command line option "-Wold-style-declaration"
cc1: error: unrecognized command line option "-Wempty-body"
cc1: error: unrecognized command line option "-Wmissing-parameter-type"
cc1: error: unrecognized command line option "-Wold-style-declaration"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
8 years agoscripts: fix remote-gdb with CONFIG_BUILD_SUFFIX
Hauke Mehrtens [Mon, 1 Aug 2016 19:59:45 +0000 (21:59 +0200)]
scripts: fix remote-gdb with CONFIG_BUILD_SUFFIX

Fix the scripts/remote-gdb script when CONFIG_BUILD_SUFFIX is set.
CONFIG_BUILD_SUFFIX extends the name of the folder build_dir/target*

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
8 years agolantiq: enable missing ath10k firmware for BT Home Hub 5A
Felix Fietkau [Mon, 1 Aug 2016 16:29:23 +0000 (18:29 +0200)]
lantiq: enable missing ath10k firmware for BT Home Hub 5A

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agobuild: remove image specific checksum code
Jo-Philipp Wich [Tue, 26 Jul 2016 13:08:19 +0000 (15:08 +0200)]
build: remove image specific checksum code

Now that we globally calculate sha256sums over the bin/ directory we can remove
the target image specific checksum handling.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobuild: add checksum target
Jo-Philipp Wich [Tue, 26 Jul 2016 13:05:35 +0000 (15:05 +0200)]
build: add checksum target

Add a new "checksum" make target which generates an sha256sums file over the
image files produced in bin/targets/ and automatically call it during make
world after the package index generation.

The advantage of this new target is that it is guaranteed to run after the
images, the SDK and the ImageBuilder archives have been generated to ensure
that they all end up in the checksum file. Fixes FS#51.

Uses sed to postprocess the OpenSSL digest output into an sha256sum command
compatible format.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoapm821xx: fix IB image building
Jo-Philipp Wich [Sat, 30 Jul 2016 13:43:35 +0000 (15:43 +0200)]
apm821xx: fix IB image building

Change the image build code to generate the DTB files as part of the kernel
build phase in order to fix the image build in the ImageBuilder environment.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobase-files: increase vm.min_free_kbytes
Felix Fietkau [Mon, 1 Aug 2016 12:52:13 +0000 (14:52 +0200)]
base-files: increase vm.min_free_kbytes

Network drivers typically allocate memory in atomic context. For that to
be reliable, there needs to be enough free memory. Set the value
heuristically based on the total amount of system RAM.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: re-enable CONFIG_SND_VERBOSE_PROCFS (FS#66)
Felix Fietkau [Mon, 1 Aug 2016 11:36:03 +0000 (13:36 +0200)]
kernel: re-enable CONFIG_SND_VERBOSE_PROCFS (FS#66)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agoar71xx: Make wget2nand look for LEDE project firmware files
diizzyy [Sun, 31 Jul 2016 20:46:29 +0000 (22:46 +0200)]
ar71xx: Make wget2nand look for LEDE project firmware files

Make wget2nand aware of the new file names

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>