Marek Vasut [Sun, 7 Jan 2018 18:37:06 +0000 (19:37 +0100)]
ARM: rmobile: Convert CONFIG_R8A77xx to Kconfig
Convert these configuration options to Kconfig, update board defconfigs
and drop them from whitelist.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 10 Jan 2018 10:47:03 +0000 (11:47 +0100)]
ARM: dts: rmobile: Factor out U-Boot extras
Pull out u-boot extras into dtsi files to make synchronization of DTS
from Linux kernel as easy as a simple copy. All the U-Boot extras are
now in *-u-boot.dts* files instead.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 29 Nov 2017 03:27:36 +0000 (04:27 +0100)]
ARM: dts: rmobile: Update DTS to match Linux 4.14
Import the RCar Gen3 DTS and headers from upstream Linux kernel v4.14,
commit
bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . This includes both M3
and H3 ULCB and Salvator-X boards.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tom Rini [Wed, 24 Jan 2018 02:48:53 +0000 (21:48 -0500)]
Merge git://git.denx.de/u-boot-fsl-qoriq
Ashish Kumar [Wed, 17 Jan 2018 06:46:37 +0000 (12:16 +0530)]
armv8: ls1088a: Add IFC and eMMC as qixis boot sources
Add macro QIXIS_LBMAP_EMMC, QIXIS_LBMAP_IFC, QIXIS_RCW_SRC_IFC,
QIXIS_RCW_SRC_EMMC to enable IFC and eMMC as boot sources for
qixis commands.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
[YS: Modify subject and add commit message]
Reviewed-by: York Sun <york.sun@nxp.com>
Ashish Kumar [Wed, 17 Jan 2018 06:46:36 +0000 (12:16 +0530)]
fsl: common: qixis: Add ifc and emmc switching via qixis
Currently only SD, NAND can be secondary boot sources controlled
by FPGA/CPLD via qixis commands. For SoC like LS1088 IFC-NOR
can be secondary boot source, while QSPI-NOR is the primary.
Add options in qixis to switch to other boot sources including
ifc and emmc.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Breno Lima [Wed, 17 Jan 2018 12:03:45 +0000 (10:03 -0200)]
crypto/fsl: Fix HW accelerated hash commands
The hash command function were not flushing the dcache before passing data
to CAAM/DMA and not invalidating the dcache when getting data back.
Due the data cache incoherency, HW accelerated hash commands used to fail
with CAAM errors like "Invalid KEY Command".
Check if pbuf and pout buffers are properly aligned to the cache line size
and flush/invalidate the memory regions to address this issue.
This solution is based in a previous work from Clemens Gruber in
commit
598e9dccc75d ("crypto/fsl: fix BLOB encapsulation and
decapsulation")
Reported-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Breno Lima <breno.lima@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Pankaj Bansal [Thu, 18 Jan 2018 04:13:33 +0000 (09:43 +0530)]
ARM: dts: Freescale: re-license device tree files under GPLv2+/X11
The current GPL only licensing on the device trees makes it very
impractical for other software components licensed under another
license.
To make it easier to reuse them, re-license the the device trees for
Freescale (now NXP) SoCs and boards under GPLv2+/X11 dual license.
Same trend is followed in linux.
Cc: Priyanka Jain <priyanka.jain@nxp.com>
Cc: Mingkai Hu <mingkai.hu@nxp.com>
Cc: York Sun <york.sun@nxp.com>
Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:10 +0000 (16:13 +0530)]
armv8: ls1088a: vid: Compiling VID specific functions for SPL
Enables and compiles VID specific functions for SPL.
Signed-off-by: Pankit Garg <pankit.garg@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:09 +0000 (16:13 +0530)]
ls1088a: Add VID support for QDS and RDB platforms
This patch adds the support for VID on LS1088AQDS and LS1088ARDB systems.
It reads the fusesr register and changes the VDD accordingly by adjusting
the voltage via LTC3882 regulator.
This patch also takes care of the special case of 0.9V VDD is present in
fusesr register. In that case,it also changes the SERDES voltage by
disabling the SERDES, changing the SVDD and then re-enabling SERDES.
Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Amrita Kumari <amrita.kumari@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:08 +0000 (16:13 +0530)]
common: board_f: vid: Add VID specific API to adjust core voltage
Adds a VID specific API in init_sequence_f and spl code flow
namely init_func_vid which is required to adjust core voltage.
VID specific code is required in spl, hence moving flag CONFIG_VID
out of spl flags.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:07 +0000 (16:13 +0530)]
ls1088a: ddr: configure DDR for 0.9v for VID support
When VID feature is supported, check the contents of fuse register
and configure DDR operate at 0.9v.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:06 +0000 (16:13 +0530)]
ddr: fsl: set cdr1 first in case 0.9v VDD is enabled for some SoCs
Sets DDR configuration parameter cdr1 before all other settings
to support case 0.9v VDD is enabled for some SoCs
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:05 +0000 (16:13 +0530)]
board: common: vid: Add support for LTC3882 voltage regulator chip
Restructures common driver to support LTC3882 voltage regulator
chip.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:04 +0000 (16:13 +0530)]
Kconfig: Add LTC3882 voltage regulator config
Adds below LTC3882 voltage regulator config:
CONFIG_VOL_MONITOR_LTC3882_READ
CONFIG_VOL_MONITOR_LTC3882_SET
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:03 +0000 (16:13 +0530)]
board: common: vid: Move IR chip specific code in flag
Moves IR chip (IR36021) specific code in flag to resolve
compilation issue where it is not present. For example,
LS1088A is having a new LTC3882 voltage chip.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:02 +0000 (16:13 +0530)]
board: common: vid: Add board specific vdd adjust API
Adds a board specific API namely board_adjust_vdd which
is required to define the board VDD adjust settings.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:01 +0000 (16:13 +0530)]
board: common:vid: Add LS1088A VID Supported voltage values
Adds below voltage values supported by LS1088A Soc:
1.025V(default), 0.9875V, 0.9750V, 0.9V, 1.0V, 1.0125V, 1.0250V.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Rajesh Bhagat [Wed, 17 Jan 2018 10:43:00 +0000 (16:13 +0530)]
armv8: lsch3: Add serdes and DDR voltage setup
Adds SERDES voltage and reset SERDES lanes API and makes
enable/disable DDR controller support 0.9V API common.
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Tom Rini [Tue, 23 Jan 2018 12:59:43 +0000 (07:59 -0500)]
Merge tag 'signed-efi-next' of git://github.com/agraf/u-boot
Patch queue for efi - 2018-01-23
This time around we have a lot of EFI patches from Heinrich.
Highlights are:
- Allow EFI applications to register as drivers
- Allow exposure of U-Boot block devices from an EFI payload
- Compatibility improvements
Tom Rini [Tue, 23 Jan 2018 02:06:41 +0000 (21:06 -0500)]
Revert "travis-ci: Add qemu-x86_64 target"
This reverts commit
998ae28799c79c6bc796aea182ae6acf13d18284.
This continues to fail in travis itself, so remove for now.
Signed-off-by: Tom Rini <trini@konsulko.com>
Adam Ford [Thu, 11 Jan 2018 14:20:27 +0000 (08:20 -0600)]
Convert CONFIG_SOC_DA8XX et al to Kconfig
This converts the following to Kconfig:
CONFIG_SOC_DA8XX
CONFIG_SOC_DA850
CONFIG_DA850_LOWLEVEL
CONFIG_MACH_DAVINCI_DA850_EVM
CONFIG_SYS_DA850_PLL_INIT
CONFIG_SYS_DA850_DDR_INIT
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: David Lechner <david@lechnology.com>
[trini: Rework CONFIG_SYS_DA850_PLL_INIT so it's selected on SOC_DA8XX]
Signed-off-by: Tom Rini <trini@konsulko.com>
Heinrich Schuchardt [Sat, 20 Jan 2018 19:44:10 +0000 (20:44 +0100)]
efi_selftest: reduce noise in test output for device trees
Some messages are only useful if an error occurs.
Fix a use after free.
Add a missing free.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sat, 20 Jan 2018 20:02:18 +0000 (21:02 +0100)]
efi_loader: allow creation of more device part nodes
Create device path nodes for UCLASS_ETH udevices.
Create device path nodes of block device children of UCLASS_MMC udevices.
Consistently use debug for unsupported nodes.
Set the log level to error.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: Fix build failure by adding #ifdef CONFIG_DM_ETH]
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 21 Jan 2018 18:29:31 +0000 (19:29 +0100)]
efi_selftest: provide a test for block io
This test checks the driver for block IO devices.
A disk image is created in memory.
A handle is created for the new block IO device.
The block I/O protocol is installed on the handle.
ConnectController is used to setup partitions and to install the simple
file protocol.
A known file is read from the file system and verified.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 21 Jan 2018 18:29:30 +0000 (19:29 +0100)]
efi_driver: EFI block driver
This patch provides
* a uclass for EFI drivers
* a EFI driver for block devices
For each EFI driver the uclass
* creates a handle
* adds the driver binding protocol
The uclass provides the bind, start, and stop entry points for the driver
binding protocol.
In bind() and stop() it checks if the controller implements the protocol
supported by the EFI driver. In the start() function it calls the bind()
function of the EFI driver. In the stop() function it destroys the child
controllers.
The EFI block driver binds to controllers implementing the block io
protocol.
When the bind function of the EFI block driver is called it creates a
new U-Boot block device. It installs child handles for all partitions and
installs the simple file protocol on these.
The read and write functions of the EFI block driver delegate calls to the
controller that it is bound to.
A usage example is as following:
U-Boot loads the iPXE snp.efi executable. iPXE connects an iSCSI drive and
exposes a handle with the block IO protocol. It calls ConnectController.
Now the EFI block driver installs the partitions with the simple file
protocol.
iPXE uses the simple file protocol to load Grub or the Linux Kernel.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: add comment on calloc len]
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 21 Jan 2018 20:30:57 +0000 (20:30 +0000)]
efi_selftest: add missing LF in test output
The output of the minicapps lacks a line feed.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 18 Jan 2018 22:21:22 +0000 (23:21 +0100)]
efi_loader: store DT in EFI_RUNTIME_SERVICES_DATA memory
The device tree is needed at runtime. So we have to store it in
EFI_RUNTIME_SERVICES_DATA memory.
The UEFI spec recommends to store all configuration tables in
EFI_RUNTIME_SERVICES_DATA memory.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 18:01:05 +0000 (19:01 +0100)]
efi_selftest: test start image
This pair of tests checks the StartImage boot service.
Each test loads an EFI application into memory and starts it.
One returns by calling the Exit boot service. The other returns directly.
The tests are not built on x86_64 because the relocation code for the efi
binary cannot be created.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:52 +0000 (20:24 +0100)]
efi_loader: fix ExitBootServices
This patch lets the implementation of ExitBootServices conform to
the UEFI standard.
The timer events must be disabled before calling the notification
functions of the exit boot services events.
The boot services must be disabled in the system table.
The handles in the system table should be defined as efi_handle_t.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:51 +0000 (20:24 +0100)]
efi_loader: add check_tpl parameter to efi_signal_event
In ExitBootServices we need to signal events irrespective of the current
TPL level. A new parameter check_tpl is added to efi_signal_event().
Function efi_console_timer_notify() gets some comments.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:49 +0000 (20:24 +0100)]
efi_loader: provide function to get last node of a device path
On a block device and its partitions the same protocols can be
installed. To tell the apart we can use the type of the last
node of the device path which is not the end node.
The patch provides a utility function to find this last node.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:48 +0000 (20:24 +0100)]
efi_loader: correct EFI_BLOCK_IO_PROTOCOL definitions
Add the revision constants.
Depending on the revision additional fields are needed in the
media descriptor.
Use efi_uintn_t for number of bytes to read or write.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:47 +0000 (20:24 +0100)]
efi_loader: make efi_disk_create_partitions a global symbol
Up to now we have been using efi_disk_create_partitions() to create
partitions for block devices that existed before starting an EFI
application.
We need to call it for block devices created by EFI
applications at run time. The EFI application will define the
handle for the block device and install a device path protocol
on it. We have to use this device path as stem for the partition
device paths.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:46 +0000 (20:24 +0100)]
efi_loader: provide a function to create a partition node
Provide new function efi_dp_part_node() to create a device
node for a partition.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:45 +0000 (20:24 +0100)]
efi_loader: make efi_block_io_guid a global symbol
The GUID of the EFI_BLOCK_IO_PROTOCOL is needed in different code
parts. To avoid duplication make efi_block_io_guid a global symbol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:44 +0000 (20:24 +0100)]
efi_loader: efi_disk_register: correctly determine if_type_name
The interface type name can be used to look up the interface type.
Don't confound it with the driver name which may be different.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:43 +0000 (20:24 +0100)]
efi_loader: fix StartImage bootservice
The calling convention for the entry point of an EFI image
is always 'asmlinkage'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:42 +0000 (20:24 +0100)]
efi_loader: check tables in helloworld.efi
Check if the device tree and the SMBIOS table are available.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:41 +0000 (20:24 +0100)]
efi_loader: allocate correct memory type for EFI image
The category of memory allocated for an EFI image should depend on
its type (application, bootime service driver, runtime service driver).
Our helloworld.efi built on arm64 has an illegal image type. Treat it
like an EFI application.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:40 +0000 (20:24 +0100)]
efi_loader: print device path when entering efi_load_image
Use %pD to print the device path instead of its address when
entering efi_load_image.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:39 +0000 (20:24 +0100)]
efi_loader: correct find simple file system protocol
In contrast to the description the code did not split the device
path into device part and file part.
The code should use the installed protocol and not refer to the
internal structure of the the disk object.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:38 +0000 (20:24 +0100)]
efi_loader: address of the simple file system protocol
When installing the the simple file system protocol we have to path
the address of the structure and not the address of a pointer to the
structure.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 19 Jan 2018 19:24:37 +0000 (20:24 +0100)]
efi_loader: return NULL from device path functions
For the construction of device paths we need to call the
AllocatePool service. We should not ignore if it fails due to an
out of memory situation.
This patch changes the device path functions to return NULL if
the memory allocation fails.
Additional patches will be needed to fix the callers.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:09 +0000 (08:16 +0100)]
efi_loader: consistently use efi_handle_t for handles
We should consistently use the efi_handle_t typedef when
referring to handles.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:08 +0000 (08:16 +0100)]
efi_selftest: test for (Dis)ConnectController
This unit test checks the following protocol services:
ConnectController, DisconnectController,
InstallProtocol, UninstallProtocol,
OpenProtocol, CloseProtcol, OpenProtocolInformation
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:07 +0000 (08:16 +0100)]
efi_selftest: remove todo in device path test
The installation of UninstallProtocol is functional now.
So we do not expect errors when calling it.
Call UninstallProtocol with correct level of indirection
for parameter handle.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:06 +0000 (08:16 +0100)]
efi_selftest: remove todo in manage protocols
The installation of UninstallProtocols is functional now.
So we do not expect errors when calling it.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:05 +0000 (08:16 +0100)]
efi_loader: disconnect controllers in UninstallProtocol
The UninstallProtocol boot service should first try to
disconnect controllers that have been connected with
EFI_OPEN_PROTOCOL_BY_DRIVER.
If the protocol is still opened by an agent, it should be
closed.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:04 +0000 (08:16 +0100)]
efi_loader: implement DisconnectController
Unfortunately we need a forward declaration because both
OpenProtocol and CloseProtocol have to call DisconnectController.
And DisconnectController calls both OpenProtcol and CloseProtocol.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:03 +0000 (08:16 +0100)]
efi_loader: fix signature of efi_disconnect_controller
Handles should be passed as efi_handle_t and not as void *.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:02 +0000 (08:16 +0100)]
efi_loader: implement ConnectController
Implement the ConnectController boot service.
A unit test is supplied in a subsequent patch.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:01 +0000 (08:16 +0100)]
efi_loader: debug output installed device path
When a device path protocol is installed write the device
path to the console in debug mode.
For printing the new macro EFI_PRINT is used, which can be reused
for future diagnostic output.
Remove unused EFI_PRINT_GUID macro
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:16:00 +0000 (08:16 +0100)]
efi_loader: implement OpenProtocolInformation
efi_open_protocol_information provides the agent and controller
handles as well as the attributes and open count of an protocol
on a handle.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: fix counting error]
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:15:59 +0000 (08:15 +0100)]
efi_loader: open_info in CloseProtocol
efi_open_protocol and efi_close_protocol have to keep track of
opened protocols.
Check if the protocol was opened for the same agent and
controller.
Remove all open protocol information for this pair.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:15:58 +0000 (08:15 +0100)]
efi_loader: open_info in OpenProtocol
efi_open_protocol has to keep track of opened protocols.
OpenProtocol enters the agent and controller handle
information into this list.
A unit test is supplied with a subsequent patch.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:15:57 +0000 (08:15 +0100)]
efi_loader: list of open protocol infos
Add a list of open protocol infos to each protocol of a handle.
Provide helper functions to access the list items.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:15:56 +0000 (08:15 +0100)]
efi_selftest: do not try to close device path protocol
CloseProtocol cannot be called without agent handle.
There is no need to close the device path protocol if
it has been opened without agent handle.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:15:55 +0000 (08:15 +0100)]
efi_loader: simplify efi_remove_all_protocols
Replace list_for_each_safe() and list_entry() by
list_for_each_entry_safe().
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 11 Jan 2018 07:15:54 +0000 (08:15 +0100)]
efi_selftest: colored test output
Add color coding to output:
test section blue
success green
errors red
todo yellow
summary white
others light gray
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
[agraf: Fold in move of set_attribute before the print]
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Wed, 17 Jan 2018 19:16:09 +0000 (20:16 +0100)]
tools: provide a tool to convert a binary file to an include
For testing EFI disk management we need an in-memory image of
a disk.
The tool file2include converts a file to a C include. The file
is separated into strings of 8 bytes. Only the non-zero strings
are written to the include. The output format has been designed
to maintain readability.
#define EFI_ST_DISK_IMG { 0x00010000, { \
{0x000001b8, "\x94\x37\x69\xfc\x00\x00\x00\x00"}, /* .7i..... */ \
{0x000001c0, "\x02\x00\x83\x02\x02\x00\x01\x00"}, /* ........ */ \
{0x000001c8, "\x00\x00\x7f\x00\x00\x00\x00\x00"}, /* ........ */ \
{0x000001f8, "\x00\x00\x00\x00\x00\x00\x55\xaa"}, /* ......U. */ \
...
{0x00006000, "\x48\x65\x6c\x6c\x6f\x20\x77\x6f"}, /* Hello wo */ \
{0x00006008, "\x72\x6c\x64\x21\x0a\x00\x00\x00"}, /* rld!.... */ \
{0, NULL} } }
As the disk image needed for testing contains mostly zeroes a high
compression ratio can be attained.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Thu, 18 Jan 2018 19:28:43 +0000 (20:28 +0100)]
efi_loader: correctly call images
Avoid a failed assertion when an EFI app calls an EFI app.
Avoid that the indent level increases when calling 'bootefi hello'
repeatedly.
Avoid negative indent level when an EFI app calls an EFI app that
calls an EFI app (e.g. iPXE loads grub which starts the kernel).
Return the status code of a loaded image that returns without
calling the Exit boot service.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Wed, 10 Jan 2018 17:06:08 +0000 (18:06 +0100)]
vsprintf.c: add EFI device path printing
For debugging efi_loader we need the capability to print EFI
device paths. With this patch we can write:
debug("device path: %pD", dp);
A possible output would be
device path: /MemoryMapped(0x0,0x3ff93a82,0x3ff93a82)
This enhancement is not available when building without EFI support
and neither in the SPL nor in the API example.
A test is provided. It can be executed in the sandbox with command
ut_print.
The development for EFI support in the sandbox is currently in
branch u-boot-dm/efi-working. The branch currently lacks
commit
6ea8b580f06b ("efi_loader: correct DeviceNodeToText
for media types"). Ater rebasing the aforementioned branch on
U-Boot v2018.01 the test is executed successfully.
Without EFI support in the sandbox the test is simply skipped.
Suggested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Sun, 14 Jan 2018 16:05:57 +0000 (17:05 +0100)]
efi_loader: text output for device path end node
Without the patch a device path consisting only of an end node is
displayed as '/UNKNOWN(007f,00ff)'. It should be displayed as '/'.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Tue, 2 Jan 2018 15:00:45 +0000 (16:00 +0100)]
MAINTAINERS: correct entry for lib/efi*/
lib/efi* indicates files efi* in directory lib.
lib/efi*/ indicates all files in directories lib/efi*.
Fixes:
623b3a579765 efi_selftest: provide an EFI selftest application
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 22 Dec 2017 18:21:04 +0000 (19:21 +0100)]
efi_selftest: do not cut off u16 strings when printing
Device paths can be very long. Due to a limited output buffer
the output for device paths is cut off. We can avoid this by
directly calling the boottime service with the the device path
string.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[agraf: Remove coloring code change]
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 22 Dec 2017 18:21:03 +0000 (19:21 +0100)]
efi_selftest: avoid superfluous messages for task priority levels
In the task priority levels test debug output is written even if no
failure is detected.
Remove this distracting output.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 22 Dec 2017 18:21:02 +0000 (19:21 +0100)]
efi_selftest: avoid superfluous messages for event services
In the event services test debug output is written even if no
failure is detected.
Remove this distracting output.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Fri, 22 Dec 2017 18:16:57 +0000 (19:16 +0100)]
efi_loader: use correct format string for unsigned long
virt_size is of type unsigned long.
So it should be printed with %ul.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Mon, 4 Dec 2017 19:52:41 +0000 (20:52 +0100)]
efi_loader: add comments to memory functions
Add comments describing memory functions.
Fix the formatting of a function declaration.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Mon, 11 Dec 2017 19:10:20 +0000 (20:10 +0100)]
efi_loader: use wide string do define firmware vendor
As the U-Boot is compiled with -fshort-wchar we can define
the firmware vendor constant as wide string.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Mon, 11 Dec 2017 11:56:44 +0000 (12:56 +0100)]
efi_loader: support device path for IDE and SCSI disks
Correctly create the device path for IDE and SCSI disks.
Support for SATA remains to be done in a future patch.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Heinrich Schuchardt [Mon, 11 Dec 2017 11:56:43 +0000 (12:56 +0100)]
efi_loader: create full device path for block devices
When creating the device path of a block device it has to
comprise the block device itself and should not end at
its parent.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
Tuomas Tynkkynen [Fri, 5 Jan 2018 00:45:21 +0000 (02:45 +0200)]
fs: fat: Drop CONFIG_SUPPORT_VFAT
fat.h unconditionally defines CONFIG_SUPPORT_VFAT (and has done since
2003), so as a result VFAT support is always enabled regardless of
whether a board config defines it or not. Drop this unnecessary option.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Tuomas Tynkkynen [Fri, 5 Jan 2018 00:45:20 +0000 (02:45 +0200)]
fs: FAT: Fix typo in FS_FAT_MAX_CLUSTSIZE description
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Tuomas Tynkkynen [Fri, 5 Jan 2018 00:45:19 +0000 (02:45 +0200)]
env: ENV_IS_IN_FAT improvements
Make it select FS_FAT as well, because if it's not selected, enabling
ENV_IS_IN_FAT causes a Kconfig warning:
warning: (ENV_IS_IN_FAT) selects FAT_WRITE which has unmet direct dependencies (FS_FAT)
This also allows dropping some code from config_fallbacks.
Also drop the unnecessary help text about having to enable
CONFIG_FAT_WRITE - Kconfig automatically handles that.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Tuomas Tynkkynen [Fri, 5 Jan 2018 00:45:18 +0000 (02:45 +0200)]
ARM: poplar: Use Kconfig to enable CONFIG_FAT_WRITE
The symbol's been converted to Kconfig for a while, poplar is the only
one #defining it.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Tuomas Tynkkynen [Fri, 5 Jan 2018 00:45:17 +0000 (02:45 +0200)]
fs: Migrate ext4 to Kconfig
Migrate the following symbols to Kconfig:
CONFIG_FS_EXT4
CONFIG_EXT4_WRITE
The definitions in config_fallbacks.h can now be expressed in Kconfig.
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Adam Ford [Tue, 2 Jan 2018 16:39:52 +0000 (10:39 -0600)]
Convert CONFIG_ROCKCHIP_USB2_PHY to Kconfig
This converts the following to Kconfig:
CONFIG_ROCKCHIP_USB2_PHY
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Tue, 2 Jan 2018 16:39:21 +0000 (10:39 -0600)]
Convert CONFIG_OMAP_USB_PHY to Kconfig
This converts the following to Kconfig:
CONFIG_OMAP_USB_PHY
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Tue, 2 Jan 2018 16:38:36 +0000 (10:38 -0600)]
Convert CONFIG_TWL4030_USB to Kconfig
This converts the following to Kconfig:
CONFIG_TWL4030_USB
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Sat, 30 Dec 2017 13:33:42 +0000 (07:33 -0600)]
Convert CONFIG_DAVINCI_SPI to Kconfig
This converts the following to Kconfig:
CONFIG_DAVINCI_SPI
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Fri, 29 Dec 2017 15:15:41 +0000 (09:15 -0600)]
Convert CONFIG_USB_MUSB_HCD et al to Kconfig
This converts the following to Kconfig:
CONFIG_USB_MUSB_HCD
CONFIG_USB_MUSB_UDC
CONFIG_USB_DAVINCI
CONFIG_USB_OMAP3
CONFIG_USB_DA8XX
CONFIG_USB_AM35X
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Fri, 29 Dec 2017 14:16:05 +0000 (08:16 -0600)]
Convert CONFIG_USB_MUSB_OMAP2PLUS et al to Kconfig
This converts the following to Kconfig:
CONFIG_USB_MUSB_OMAP2PLUS
CONFIG_USB_MUSB_AM35X
CONFIG_USB_MUSB_DSPS
CONFIG_USB_MUSB_PIO_ONLY
Signed-off-by: Adam Ford <aford173@gmail.com>
Adam Ford [Wed, 27 Dec 2017 19:39:56 +0000 (13:39 -0600)]
ARM: omap3_logic: Enable SPL_OF_CONTROL and SPL_OF_PLATDATA
The SPL doesn't have much room, so in order to support OF_CONTROL
in SPL, we need the extra functionality of SPL_OF_PLATDATA.
Adding these features allows us to remove a small part of code without
losing the serial port during SPL.
Signed-off-by: Adam Ford <aford173@gmail.com>
Tom Rini [Sat, 11 Feb 2017 15:44:05 +0000 (10:44 -0500)]
travis-ci: Add qemu-x86_64 target
Add qemu-x86_64 to the list of targets we use for test.py runs.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Mon, 22 Jan 2018 01:13:29 +0000 (20:13 -0500)]
Merge git://git.denx.de/u-boot-dm
Mario Six [Mon, 15 Jan 2018 10:07:36 +0000 (11:07 +0100)]
lib: fdtdec: Fix some style violations
Fix some style violations in fdtdec.c, and reduce the scope of some
variables.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:07:35 +0000 (11:07 +0100)]
lib: fdtdec: Fix whitespace style violations
Fix some whitespace-related style violations in fdtdec.c.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:07:20 +0000 (11:07 +0100)]
core: Make device_is_compatible live-tree compatible
Judging from its name and parameters, device_is_compatible looks like it
is compatible with a live device tree, but it actually isn't.
Make it compatible with a live device tree.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:07:19 +0000 (11:07 +0100)]
core: Add {ofnode, dev}_translate_address functions
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:07:18 +0000 (11:07 +0100)]
core: read: Fix style violations
There are some whitespace-related style violations in read.c; fix those.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:07:17 +0000 (11:07 +0100)]
core: ofnode: Fix style violations
There are some style violations in ofnode.c; fix those.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:06:54 +0000 (11:06 +0100)]
clk: Makefile: Sort entries alphabetically
The Makefile entries in the clk driver directory were not alphabetically
sorted. Correct this.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:06:53 +0000 (11:06 +0100)]
clk: Remove superfluous gd declarations
The clk uclass was converted to support a live device tree recently,
hence the global data pointer declarations are no longer needed.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:06:52 +0000 (11:06 +0100)]
clk: clk_fixed_rate: Fix style violation
Fix a mis-indented function call in clk_fixed_rate.c
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Mario Six [Mon, 15 Jan 2018 10:06:51 +0000 (11:06 +0100)]
clk: clk-uclass: Fix style violations
checkpatch.pl complains that the clk_ops structures used in clk-uclass.c
ought to be const, so we mark them as const.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Peng Fan [Fri, 5 Jan 2018 06:05:17 +0000 (14:05 +0800)]
dm: pinctrl: sync with Linux to use pin_config_param
Sync with Linux commit
30a7acd573899fd8b("Linux 4.15-rc6")
to use enum pin_config_param.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Brüns [Sun, 31 Dec 2017 22:21:17 +0000 (23:21 +0100)]
patman: Unquote output from get_maintainer.pl
get_maintainer.pl quotes names which it considers unsafe, i.e. anything
containing [^a-zA-Z0-9_ \-]. This confuses patman, it will duplicate
addresses which are also in Series-to/cc. Strip the quotes.
Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mario Six [Wed, 20 Dec 2017 08:52:12 +0000 (09:52 +0100)]
drivers: core: Add translation in live tree case
The function dev_read_addr calls ofnode_get_addr_index in the live tree
case, which does not apply bus translations to the address read from the
device tree. This results in illegal addresses on boards that rely on
bus translations being applied.
Fix this situation by applying bus translations in the live tree case as
well.
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Tested-by: Stephen Warren <swarren@nvidia.com>
projects / oweals / u-boot.git / log