Update generator copyright year.

Some Travis builds appear to fail because generated objects get
2019 copyrights now, and the diff complains.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7986)

Add a test for correct handling of the cryptopro bug extension

This was complicated by the fact that we were using this extension for our
duplicate extension handling tests. In order to add tests for cryptopro
bug the duplicate extension handling tests needed to change first.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)

Don't complain if we receive the cryptopro extension in the ClientHello

The cryptopro extension is supposed to be unsolicited and appears in the
ServerHello only. Additionally it is unofficial and unregistered - therefore
we should really treat it like any other unknown extension if we see it in
the ClientHello.

Fixes #7747

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7984)

doc/man1/x509.pod: fix typo

This looks like a copy&paste error from req.pod to x509.pod.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7995)

Restore compatibility with GOST2001 implementations.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7985)

Fix no-sock

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7981)

Fix no-cmac

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7979)

crypto/evp/e_aes.c: build again on s390x

The stuff needed to build with SIV wasn't in place for s390x

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7988)

crypto/chacha/asm/chacha-s390x.pl: add vx code path.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6919)

s390x assembly pack: perlasm support.

Added crypto/perlasm/s390x.pm Perl module. Its primary use is to be
independent of binutils version, that is to write byte codes of
instructions that are not part of the base instruction set.
Currently only gas format is supported.

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6919)

Support _onexit() in preference to atexit() on Windows

This enables cleanup to happen on DLL unload instead of at process exit.

[extended tests]

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Introduce a no-pinshared option

This option prevents OpenSSL from pinning itself in memory.

Fixes #7598

[extended tests]

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Test atexit handlers

Test that atexit handlers get called properly at process exit, unless we
have explicitly asked for them not to be.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Don't link shlibloadtest against libcrypto

The whole point of shlibloadtest is to test dynamically loading and
unloading the library. If we link shlibloadtest against libcrypto then that
might mask potential issues.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Implement OPENSSL_INIT_NO_ATEXIT

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Fix a RUN_ONCE bug

We have a number of instances where there are multiple "init" functions for
a single CRYPTO_ONCE variable, e.g. to load config automatically or to not
load config automatically. Unfortunately the RUN_ONCE mechanism was not
correctly giving the right return value where an alternative init function
was being used.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Fix shlibloadtest to properly execute the dso_ref test

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7647)

Eliminate unused buffers from ssl3_change_cipher_state

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7971)

Remove unused variables from tls1_change_cipher_state

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7971)

make update

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7972)

Fix cert with rsa instead of rsaEncryption as public key algorithm

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7962)

Fix a minor nit in the hkdflabel size

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7913)

Fixed minor typo in the req.pod docs

CLA: Trivial

Fixes #7928.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7973)

fixed grammar typo

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7959)

Minor doc fixes for EVP_MAC.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7716)

EVP_PKEY_size declared to take a const parameter

CLA: trivial
Function EVP_PKEY_size has been modified to take a const parameter

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7892)

Do not complain when /dev/crypto does not exist.

FreeBSD does not enable cryptodev(4) by default.  OpenBSD disabled support
for /dev/crypto by default from 4.9 and removed it from 5.7.  Now the engine
is properly enabled by default on BSD platforms (see #7885), it continuously
complains:

Could not open /dev/crypto: No such file or directory

Hide the nagging error message behind ENGINE_DEVCRYPTO_DEBUG.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7896)

Coverity fix in some crypto/asn1 code

Call to i2d method returns an int value.

Fix:
CID 1338183 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371691 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)
CID 1371692 (#1 of 1): Improper use of negative value (NEGATIVE_RETURNS)

[extended tests]

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)

Coverity fix in apps/oscp

CID 1440002 (#1 of 1): Use after free (USE_AFTER_FREE)
Not a deadly error, because error was just before app exit.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7359)

util/process_docs.pl: handle multiple source directories correctly

The way this script handled multiple source directories wasn't quite
right, it ended up giving pod2html 'ARRAY(0xXXXXXXXXX)' as a source
directory.

This corrects the mistake.

Fixes #7742
Fixes #7939

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7911)

Admit unknown pkey types at security level 0

The check_key_level() function currently fails when the public key
cannot be extracted from the certificate because its algorithm is not
supported.  However, the public key is not needed for the last
certificate in the chain.

This change moves the check for level 0 before the check for a
non-NULL public key.

For background, this is the TPM 1.2 endorsement key certificate.
I.e., this is a real application with millions of certificates issued.
The key is an RSA-2048 key.

The TCG (for a while) specified

     Public Key Algorithm: rsaesOaep

rather than the commonly used

     Public Key Algorithm: rsaEncryption

because the key is an encryption key rather than a signing key.
The X509 certificate parser fails to get the public key.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7906)

Fix function names in ct(7) documentation

The correct function name is SSL_CTX_enable_ct, not SSL_CTX_ct_enable.

Signed-off-by: Christian Heimes <christian@python.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7916)

Some code-cleanup/simplification in apps

Remove some casts on password callback by adding a wrapper function.
Remove level of indent by doing an early-return on failure.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7873)

X509_check_issued: check that signature algo matches signing key algo

This implements 3.5.18 "Consistent Public Key and Signature Algorithms"
from RFC 4158 "Internet X.509 Public Key Infrastructure: Certification
Path Building"

Ref: https://tools.ietf.org/html/rfc4158#section-3.5.18

Fixes #7899

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7919)

Fix s_client hang on non-compliant NNTP server test

Fixes #7722

CLA: trivial

Signed-off-by: Mateja Milosevic <quantumgleam@gmail.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7915)

man: harmonize the various formulations in the HISTORY sections

While stereotyped repetitions are frowned upon in literature, they
serve a useful purpose in manual pages, because it is easier for
the user to find certain information if it is always presented in
the same way. For that reason, this commit harmonizes the varying
formulations in the HISTORY section about which functions, flags,
etc. were added in which OpenSSL version.

It also attempts to make the pod files more grep friendly by
avoiding to insert line breaks between the symbol names and the
corresponding version number in which they were introduced
(wherever possible). Some punctuation and typographical errors
were fixed on the way.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7854)

Convert tls1_prf_P_hash to use the EVP_MAC interface

Reviewed-by: Richard Levitte <levitte@openssl.org>
GH: #7554

Deprecate TLS_MAX_VERSION, DTLS_MAX_VERSION and DTLS_MIN_VERSION

Fixes: #7183

Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #7260

Use (D)TLS_MAX_VERSION_INTERNAL internally

Use 0 if we don't want to set a minimum or maximum version

Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #7260

ERR: preserve system error number in a few more places

It turns out that intialization may change the error number, so we
need to preserve the system error number in functions where
initialization is called for.
These are ERR_get_state() and err_shelve_state()

Fixes #7897

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7902)

Fixes #7879: AES-SIV to use EVP_MAC APIs

Convert CMAC APIs to EVP_MAC APIs

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7891)

Add missing OPENSSL_clear_free before using ec->key

Fixes #7657

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7877)

add missing check for BN_mod_inverse

Fixes #7650

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7876)

fix inconsistent flen check in rsa_pk1 and rsa_oaep

Fixes #7117

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7880)

Ignore duplicated undocumented things

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7423)

VMS build: better treatment of .S -> .obj compilation

It turned out that .S files aren't to be treated as lightly as I
thought.  They need to go through a preprocessing step, which .s files
don't need to.

Corrects #7703

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7889)

doc/man3: remove copy&paste leftover

Fixes #7883

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7884)

Use the correct function name

CLA: trivial

Signed-off-by: Jakub Jelen <jjelen@redhat.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7887)

Fix error in processing $target{enable}

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7885)

Fixed typo (vi leftover).

There was a trailing :w at a line, which didn't make sense in context
of the sentence/styling. Removed it, because I think it's a leftover
vi command.

CLA: trivial
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7875)

Add RFC5297 AES-SIV support

Based originally on github.com/dfoxfranke/libaes_siv

This creates an SIV128 mode that uses EVP interfaces for the CBC, CTR
and CMAC code to reduce complexity at the cost of perfomance. The
expected use is for short inputs, not TLS-sized records.

Add multiple AAD input capacity in the EVP tests.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3540)

Add an Ed448 malleability test

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7748)

Disallow Ed448 signature malleability

Check that s is less than the order before attempting to verify the
signature as per RFC8032 5.2.7

Fixes #7706

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7748)

typo ANS1 -> ASN1

CLA: trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7857)

util/mkdef.pl: Remove a ';' that snuck in

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7868)

Configuration: $config{shlib_version_number} -> $config{shlib_version}

This was forgotten in a few places

Fixes #7862

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7865)

apps/tsget.in: use the full version in the user agent string

Fixes #7861

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7866)

VMS: fix library compatibility settings in util/mkdef.pl

The regexp to parse the incoming version number was flawed, and since
we allow ourselves to add missing APIs in PATCH releases, the
compatibility settings still need to include the PATCH part of the
version number.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7858)

eng_devcrypto: add command to dump driver info

This is useful to determine the kernel driver running each algorithm.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: add configuration options

USE_SOFTDRIVERS: whether to use software (not accelerated) drivers
CIPHERS: list of ciphers to enable
DIGESTS: list of digests to enable

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: save ioctl if EVP_MD_..FLAG_ONESHOT

Since each ioctl causes a context switch, slowing things down, if
EVP_MD_CTX_FLAG_ONESHOT is set, then:
 - call the ioctl in digest_update, saving the result; and
 - just copy the result in digest_final, instead of using another ioctl.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: make sure digest can do copy

Digest must be able to do partial-state copy to be used.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: fix ctr mode

Make CTR mode behave like a stream cipher.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: add cipher CTX copy function

The engine needs a custom cipher context copy function to open a new
/dev/crypto session.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: close session on cleanup, not final

Close the session in digest_cleanup instead of digest_final.  A failure
in closing the session does not mean a previous successful digest final
has failed as well.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: fix copy of unitilialized digest

If the source ctx has not been initialized, don't initialize the copy
either.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: expand digest failure cases

Return failure when the digest_ctx is null in digest_update and
digest_final, and when md is null in digest_final.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

eng_devcrypto: don't leak methods tables

Call functions to prepare methods after confirming that /dev/crytpo was
sucessfully open and that the destroy function has been set.

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

INSTALL: add note about devcrypto engine

Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7585)

Document the num_tickets s_server option

Fixes #7727

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7756)

Preserve errno on dlopen

For the same reasons as in the previous commit we must preserve errno
across dlopen calls. Some implementations (e.g. solaris) do not preserve
errno even on a successful dlopen call.

Fixes #6953

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7680)

Make sure build_SYS_str_reasons() preserves errno

This function can end up being called during ERR_get_error() if we are
initialising. ERR_get_error() must preserve errno since it gets called via
SSL_get_error(). If that function returns SSL_ERROR_SYSCALL then you are
supposed to inspect errno.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7680)

make update

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7852)

Prevent calling decryption in an encryption context and vice versa

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7852)

Cleaner disposal of ephemeral engine ids and names

Engine names and ids are typically static strings.  If an application
actually dynamically allocated these, the application owns the
storage, and should dispose of it via the original handle, rather
than the "const char *" returned by the engine.

In any case, this resolves the test code issue without resort to
"unconst" macros/casts.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Eliminate NOP cast

Reviewed-by: Richard Levitte <levitte@openssl.org>

change into hex string constants to avoid overflow warnings

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Add a format attribute to the format functions and fix the broken format
strings.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Fix const issues

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Avoid const castaway warning

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Use a const variable

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Use the proper fonst cast

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

don't pass const string where a modifyable string is expected

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

add missing "void" in prototype.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

add missing const in cast

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

add missing const

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

use the proper types to eliminate casts

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

err/err.c: improve err_clear_last_constant_time's portability.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7850)

Update kmac.c

fix nmake compiler error

```
crypto\kmac\kmac.c : warning treated as error - no object file generated
crypto\kmac\kmac.c : warning C4819: The file contains a character that cannot be represented in the current code page (936). Save the file in Unicode format to prevent data loss
```

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7846)

Configure: fix the version string in the configure output

Since `$config{version}` and `$config{version_num}` were removed
in commit 3a63dbef15b6, the configure output displays an empty
version number string in parentheses instead of the version number.

This pull request fixes that by adding new config variables
`version` and `full_version`, analogous to `OPENSSL_VERSION_STR`
and `OPENSSL_FULL_VERSION_STR`.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7841)

Remove all NOEXIST symbols from ordinals files

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7740)

make update

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7740)

util/perl/OpenSSL/Ordinals.pm: introduce a base version

The idea is that a base version is the minimum version that must be
assigned to all symbols.  The practical result is that, for any new
major release, the version number for all symbols will automatically
be bumped to the new release's version number, if necessary.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7740)

util/perl/OpenSSL/Ordinals.pm: use OpenSSL::Util::cmp_versions

OpenSSL::Util::cmp_versions() is introduced to be used everywhere
where versions are compared.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7740)

util/perl/OpenSSL/Ordinals.pm: shift to dotted versions internally

Any version from an ordinals file will have '_' changed to '.' on
input, and changed back on output.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7740)

apps: print Kernel TLS in s_client and s_server

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)

CHANGES: Add Linux Kernel TLS data-path

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)

sslapitest: add test ktls

Add a unit-test for ktls.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)

ssl: Linux TLS Tx Offload

This patch adds support for the Linux TLS Tx socket option.
If the socket option is successful, then the data-path of the TCP socket
is implemented by the kernel.
We choose to set this option at the earliest - just after CCS is complete.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)

evp/e_aes: Expose IV

This commit exposes the cipher's IV to applications.

Signed-off-by: Boris Pismenny <borisp@mellanox.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5253)