Matthias Weisser [Sat, 5 Nov 2011 02:15:44 +0000 (02:15 +0000)]
arm: jadecpu: Readd MACH_TYPE_JADECPU
MACH_TYPE_JADECPU was removed from mach-types.h. Add it to board
config file.
Signed-off-by: Matthias Weisser <weisserm@arcor.de>
Daniel Gorsulowski [Sun, 30 Oct 2011 22:52:29 +0000 (22:52 +0000)]
at91: defined mach-types for otc570 board in board config file
quotation from Albert ARIBAUD:
"Recently the ARM mach-types.h file has been brought in sync with its
Linux original, leasing to a number of boards not being listed any more,
as the new list only contains boards which have actual Linux support or
were declared less than one year ago.
The symptom is a build failure with a message of the form "error:
'MACH_TYPE_XXXXXX' undeclared (first use in this function)".
U-Boot maintainers of such boards (in Cc: of this mail) should provide a
patch to re-introduce the MACH_TYPE_XXXXXX definition in their boards'
config header file in include/configs/."
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Daniel Gorsulowski [Sun, 30 Oct 2011 22:52:28 +0000 (22:52 +0000)]
at91: defined mach-types for meesc board in board config file
quotation from Albert ARIBAUD:
"Recently the ARM mach-types.h file has been brought in sync with its
Linux original, leasing to a number of boards not being listed any more,
as the new list only contains boards which have actual Linux support or
were declared less than one year ago.
The symptom is a build failure with a message of the form "error:
'MACH_TYPE_XXXXXX' undeclared (first use in this function)".
U-Boot maintainers of such boards (in Cc: of this mail) should provide a
patch to re-introduce the MACH_TYPE_XXXXXX definition in their boards'
config header file in include/configs/."
Signed-off-by: Daniel Gorsulowski <Daniel.Gorsulowski@esd.eu>
Fabio Estevam [Tue, 1 Nov 2011 08:16:37 +0000 (08:16 +0000)]
mx31pdk: Enable D and I caches
Enable D and I caches on mx31pdk.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Wolfgang Grandegger [Mon, 17 Oct 2011 08:17:47 +0000 (08:17 +0000)]
ehci-mxc: remove incorrect comment
The USB port to be used is determined by CONFIG_MXC_USB_PORT.
So, it appears that the comment is not correct. Remove it.
Signed-off-by: Wolfgang Grandegger <wg@denx.de>
Fabio Estevam [Fri, 28 Oct 2011 08:57:46 +0000 (08:57 +0000)]
README: Fix supported i.MX SoC list for CONFIG_MXC_SPI
CONFIG_MXC_SPI currently works on MX31/35/51 boards, so update the README file.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Mon, 24 Oct 2011 08:08:00 +0000 (08:08 +0000)]
mx53: Turn off child clocks before reconfigure perclk_root
In addition to ensuring that PERCLK remains at least 2.5 times slower
than the AHB clock, certain steps need to be followed to ensure robust
operation of PERCLK when reconfiguring the PERCLK clock source.
To properly configure the PERCLK clock source, the following steps are
required:
1.In the CCGR registers, gate the clocks to all PERCLK-dependent
modules.
2.Select the desired input clock for the PERCLK root clock (to be either
source from the peripherals main source clock or the
lp_apm clock source). Refer to the CMCBR register, perclk_lp_apm_sel bit.
3.Configure the perclk_pred1, perclk_pred2, and perclk_podf dividers
to the desired setting. Refer to the CBCDR register for details.
4.In the CCGR registers, enable the desired clocks for the
PERCLK-dependent module clocks.
If these steps aren't followed, GPT timer may stop and the kernel stops
at "Calibrating delay loop".
Signed-off-by: Terry Lv <r65388@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Wolfgang Denk [Tue, 25 Oct 2011 09:48:16 +0000 (09:48 +0000)]
qong: enable support for compressed images
- enable support for unzip command
- enable support for compressed bitmap images
We also have to increase the malloc() arena a bit for this.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Anatolij Gustschin [Sat, 29 Oct 2011 05:12:25 +0000 (05:12 +0000)]
imx: imx31_phycore.h: fix checkpatch warnings
Cleanup board config file and fix issues reported by
checkpatch.pl script.
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Thu, 27 Oct 2011 01:29:45 +0000 (01:29 +0000)]
vision2: Remove unused get_board_rev function
No board information is passed for VISION2, so remove get_board_rev function.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Thu, 27 Oct 2011 01:29:43 +0000 (01:29 +0000)]
mx53smd: Remove unused get_board_rev function
No board information is passed for MX53SMD, so remove get_board_rev function.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Thu, 27 Oct 2011 01:29:42 +0000 (01:29 +0000)]
mx53ard: Remove unused get_board_rev function
No board information is passed for MX53ARD, so remove get_board_rev function.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Thu, 27 Oct 2011 01:29:41 +0000 (01:29 +0000)]
mx53evk: Remove unused get_board_rev function
No board information is passed for MX53EVK, so remove get_board_rev function.
Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
Fabio Estevam [Tue, 25 Oct 2011 01:44:19 +0000 (01:44 +0000)]
mx53evk: Add RTC support
MX53EVK has an MC13892 PMIC. Add RTC support.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu < jason.hui@linaro.org>
Fabio Estevam [Thu, 27 Oct 2011 01:29:44 +0000 (01:29 +0000)]
mx53loco: Remove unused get_board_rev function
No board information is passed for MX53LOCO, so remove get_board_rev function.
Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
Fabio Estevam [Thu, 27 Oct 2011 01:32:43 +0000 (01:32 +0000)]
mx53evk: Remove unneeded '1' from mx53evk.h
Remove unneeded '1' from mx53evk.h.
Cc: Jason Liu <r64343@freescale.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Jason Liu <r64343@freescale.com>
Michael Jones [Fri, 4 Nov 2011 17:53:44 +0000 (13:53 -0400)]
OMAP3: mvblx: Initial support for mvBlueLYNX-X
Add support for the MATRIX VISION mvBlueLYNX-X, an OMAP3-based
intelligent camera.
Signed-off-by: Michael Jones <michael.jones@matrix-vision.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Luca Ceresoli [Fri, 4 Nov 2011 17:42:09 +0000 (13:42 -0400)]
ARM: dig297: Define MACH_TYPE_OMAP3_CPS and CONFIG_MACH_TYPE
MACH_TYPE_OMAP3_CPS was dropped in the latest mach-types sync (
47af6f61bcd9)
because it is not mainlined in Linux.
Signed-off-by: Luca Ceresoli <luca.ceresoli@comelit.it>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Wolfgang Denk <wd@denx.de>
CC: Tom Rini <tom.rini@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Thu, 27 Oct 2011 11:23:14 +0000 (16:53 +0530)]
omap3: mem: Move comments next to definitions
Calculations for ACTIM_CTRLA amd ACTIM_CTRLB values
are defined in 'header' style comments.
Moved them along with definitions. Should help maintain
consistency between comments and code if any of these
are tweaked in future.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Thu, 27 Oct 2011 10:51:57 +0000 (16:21 +0530)]
omap3: mem: Clean-up whitespaces
Consistent use of TABs and align definitions with
neighbouring code.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Thu, 27 Oct 2011 10:45:19 +0000 (16:15 +0530)]
omap3: mem: Define and use common macros
Define common macros to arrive at the values of registers
SDRC_ACTIM_CTRLA and SDRC_ACTIM_CTRLB for different memory
types.
This doesn't make any real change in the execution but
helps readability.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Tue, 4 Oct 2011 23:43:39 +0000 (23:43 +0000)]
Davinci: ea20: added PREBOOT to configuration
PREBOOT is used on the ea20 to load a splash image
at the start up.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Tue, 4 Oct 2011 23:43:38 +0000 (23:43 +0000)]
Davinci: ea20: added I2C support
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Tue, 4 Oct 2011 23:43:37 +0000 (23:43 +0000)]
Davinci: ea20: added video support
Signed-off-by: Stefano Babic <sbabic@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Fri, 7 Oct 2011 23:27:34 +0000 (23:27 +0000)]
VIDEO: davinci: add framebuffer to da8xx
The patch is a port from the framebuffer driver
of the Linux driver drivers/video/da8xx-fb.c, used
on davinci da8xx and OMAP-L138 boards.
As base for the port, the following commit (last changes
for this driver at the moment in the Linux kernel tree)
was taken:
commit
1db41e032d563eb47deab40dc5595be306b143ba
Author: axel lin <axel.lin@gmail.com>
Date: Tue Feb 22 01:52:42 2011 +0000
video: da8xx-fb: fix section mismatch warning
Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Tue, 4 Oct 2011 23:43:35 +0000 (23:43 +0000)]
ARM: Davinci: added missing registers to hardware.h
The hardware base address for ther LCD configuration
registers is missing, as well as some syscfg registers.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Bastian Ruppert [Tue, 4 Oct 2011 23:43:34 +0000 (23:43 +0000)]
Davinci: ea20: add gpios for LCD backlight control
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Bastian Ruppert [Tue, 4 Oct 2011 23:43:33 +0000 (23:43 +0000)]
Davinci: ea20: add gpio for keeping power on in board_late_init
The pin called HALTEN drives a transistor to operate the supply
voltage. After HALTEN is high, the user can release the power
switch button and the device will stay powered on.
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: sbabic@denx.de
CC: dzu@denx.de
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Tue, 4 Oct 2011 23:43:32 +0000 (23:43 +0000)]
Davinci: ea20: Add default U-Boot environment
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Tue, 4 Oct 2011 23:43:31 +0000 (23:43 +0000)]
Davinci: ea20: Add early init to get early output from console
Use board_early_init_f so that the full boot log output can be displayed.
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Stefano Babic [Tue, 4 Oct 2011 23:43:30 +0000 (23:43 +0000)]
Davinci: ea20: Add NAND support
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Bastian Ruppert [Tue, 4 Oct 2011 23:43:29 +0000 (23:43 +0000)]
Davinci: ea20: set GPIOs to hold MII-Phy in reset and set UART0-Switch for console
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: dzu@denx.de
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Bastian Ruppert [Tue, 4 Oct 2011 23:43:28 +0000 (23:43 +0000)]
Davinci: ea20: set console on UART0
Signed-off-by: Bastian Ruppert <Bastian.Ruppert@Sewerin.de>
Signed-off-by: Stefano Babic <sbabic@denx.de>
CC: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:35 +0000 (20:00 +0000)]
arm, davinci: add cam_enc_4xx support
- DM368 SOC
- booting with spl not with UBL from TI
- before loading u-boot from NAND into RAM, test
the RAM with the post memory test. If error
is found, switch all LEDs on and halt system.
- SPI Flash
Dataflash Typ: M25PE80
- Ethernet DM9161BI
- MMC
- USB
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:34 +0000 (20:00 +0000)]
arm926ejs, davinci: add missing spi defines for dm365
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:33 +0000 (20:00 +0000)]
arm926ejs, davinci: add cpuinfo for dm365
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:32 +0000 (20:00 +0000)]
arm, davinci: add lowlevel function for dm365 soc
used for booting (for example) from NAND using spl code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:31 +0000 (20:00 +0000)]
arm, davinci: add header files for dm365
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:30 +0000 (20:00 +0000)]
spl, nand: add 4bit HW ecc oob first nand_read_page function
similiar to commit
dc7cd8e59ba077f3b4c1a4557c9cd86a31b9ab1f, only
adapted for the new spl framework.
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Scott Wood <scottwood@freescale.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:29 +0000 (20:00 +0000)]
arm, davinci: add support for new spl framework
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:28 +0000 (20:00 +0000)]
spl: add option for adding post memory test to the SPL framework
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:27 +0000 (20:00 +0000)]
net, davinci_emac: make clock divider in MDIO control register configurable
Define CONFIG_SYS_EMAC_TI_CLKDIV for setting the clkdiv value
in the MDIO control register.
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Sandeep Paulraj <s-paulraj@ti.com>
cc: Wolfgang Denk <wd@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:26 +0000 (20:00 +0000)]
arm, usb, davinci: make USBPHY_CTL register configurable
Define CONFIG_DV_USBPHY_CTL for setting the USB PHY control
register.
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Remy Bohmer <linux@bohmer.net>
cc: Sandeep Paulraj <s-paulraj@ti.com>
cc: Remy Bohmer <linux@bohmer.net>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 1 Nov 2011 20:00:25 +0000 (20:00 +0000)]
usb, davinci: add enable_vbus() weak function
Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Remy Bohmer <linux@bohmer.net>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Tue, 25 Oct 2011 06:11:33 +0000 (06:11 +0000)]
omap3evm: fix errors caused by multiple definitions
Fix these errors when building with recently added
omap3_evm_quick_nand_config:
env_nowhere.o: In function `env_relocate_spec':
/home/premi/u-boot/common/env_nowhere.c:40: multiple definition
of `env_relocate_spec'
env_nand.o:/home/premi/u-boot/common/env_nand.c:416: first defi
ned here
env_nowhere.o: In function `env_get_char_spec':
/home/premi/u-boot/common/env_nowhere.c:44: multiple definition
of `env_get_char_spec'
env_nand.o:/home/premi/u-boot/common/env_nand.c:77: first defin
ed here
env_nowhere.o: In function `env_init':
/home/premi/u-boot/common/env_nowhere.c:54: multiple definition
of `env_init'
env_nand.o:/home/premi/u-boot/common/env_nand.c:144: first defi
ned here
env_nowhere.o: In function `env_relocate_spec':
/home/premi/u-boot/common/env_nowhere.c:40: multiple definition
of `env_ptr'
env_nand.o:/home/premi/u-boot/common/env_nand.c:77: first defin
ed here
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Tue, 25 Oct 2011 06:11:32 +0000 (06:11 +0000)]
omap3evm: Add (quick) configuration for NAND only
Add an optimized board configuration that only
supports boot from NAND.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Tue, 25 Oct 2011 06:11:31 +0000 (06:11 +0000)]
omap3evm: Add (quick) configuration for MMC/SD only
Add an optimized board configuration that only
supports boot from MMC/SD.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Tue, 25 Oct 2011 06:11:30 +0000 (06:11 +0000)]
omap3evm: move common config options to new file
This patch moves common config options to a new
file. Common options can now be included in other
board configs for this evm.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Tue, 25 Oct 2011 06:11:29 +0000 (06:11 +0000)]
omap3evm: Prepare to split configuration
This patch marks the beginning of steps that would
lead to clean and easy split of the configuration
file. Common portion can then be re-used by other
configurations.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Tue, 25 Oct 2011 06:11:28 +0000 (06:11 +0000)]
omap3evm: Reorder related config options
This patch brings related config options together.
Most config options won't be evaluated for numerical
value, but they are being set to 1. This patch also
removes this assignment.
Some formatting changes were also done for consistent
look-n-feel after the movement.
The patch doesn't make/include any other functional
change.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Cc: Sandeep Paulraj <s-paulraj@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Ilya Yanok [Tue, 1 Nov 2011 13:16:03 +0000 (13:16 +0000)]
omap/spl: actually enable the console
Currently OMAP SPL code does all the initialization but does not set the
gd->have_console value so no output is actually performed. This patch
sets gd->have_console to 1.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Ilya Yanok [Tue, 1 Nov 2011 13:15:55 +0000 (13:15 +0000)]
davinci_emac: compilation fix, phy is array now
Fix compilation issues introduced by recent multiply PHY patch.
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Sanjeev Premi [Fri, 2 Sep 2011 05:57:16 +0000 (05:57 +0000)]
omap3evm: Set environment variable 'ethaddr'
It is now responsibility of the board specific init
code to set the environment variable corresponding
to the MAC address.
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Sat, 16 Jul 2011 00:06:43 +0000 (00:06 +0000)]
arm, arm926: fix missing symbols in NAND_SPL mode
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Christian Riesch [Wed, 12 Oct 2011 21:26:43 +0000 (21:26 +0000)]
arm, davinci: Add function lpsc_syncreset()
This patch adds a function lpsc_syncreset that allows setting a
lpsc module into Sync Reset state.
Signed-off-by: Christian Riesch <christian.riesch@omicron.at>
Cc: Heiko Schocher <hs@denx.de>
Cc: Paulraj Sandeep <s-paulraj@ti.com>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Heiko Schocher [Tue, 26 Jul 2011 20:12:34 +0000 (20:12 +0000)]
arm, davinci: replace CONFIG_PRELOADER with CONFIG_SPL_BUILD
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
Thomas Herzmann [Tue, 13 Sep 2011 22:41:03 +0000 (22:41 +0000)]
arm/km: portl2 environment address update to P1B
The environment eeprom is now at a different MUX address.
Signed-off-by: Thomas Herzmann <thomas.herzmann@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Holger Brunck [Tue, 13 Sep 2011 22:41:02 +0000 (22:41 +0000)]
arm/km: adapt bootcounter evaluation
The bootcounter (stored in the RAM) is not enough protected with the 4 Bytes
BOOTCOUNT_MAGIC against bit errors due to short power loss or holding a system
in RESET. It has been seen, that the bootcounter value has been changed due to
a bit flip on a system holding in RESET, but the BOOTCOUNT_MAGIC was still valid.
A bit pattern with 4000 bytes (after BOOTCOUNT_MAGIC) has been implemented,
which should be enough to detect a bit error.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Holger Brunck [Tue, 13 Sep 2011 22:41:06 +0000 (22:41 +0000)]
arm/km: enable jffs2 cmds
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Holger Brunck [Tue, 13 Sep 2011 22:41:05 +0000 (22:41 +0000)]
arm/km: trigger reconfiguration for the Xilinx FPGA
The Xilinx FPGA must be reconfigured each time the unit
reboots. The FPGA is connected to the GPIO pin 39 from kirkwood.
This patch triggers this pin for km_kirkwood_pci targets.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Holger Brunck [Tue, 13 Sep 2011 22:41:04 +0000 (22:41 +0000)]
arm/km: add boardid and hwkey to kernel command line
We need in some cases a possibility for the kernel to distinguish
on which board he is running. On powerpc we did this with different
dts files. On arm currently we can't do this, so add boardid and
hwkey to the kernel command line and use it later on in the kernel
code.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Valentin Longchamp [Tue, 1 Nov 2011 11:56:36 +0000 (17:26 +0530)]
ARM: Reintroduce MACH_TYPE_KM_KIRKWOOD for keymile ARM boards
We got dropped from Linux mach-types.h because of a lack of mainline
support and this is needed since the last Linux/u-boot mach-types
synchro.
This patch also defines CONFIG_MACH_TYPE for all keymile boards, as
this is a mandatory CONFIG for ARM boards now. The initialization
of gd->bd->bi_arch_number is removed form km_arm.c, our board file.
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Simon Guinot [Tue, 1 Nov 2011 11:14:12 +0000 (16:44 +0530)]
netspace_v2: enable I2C EEPROM support
An I2C EEPROM HT24LC04 (512B) is available on the netspace_v2 board
(and parents). This EEPROM hold data such as Ethernet MAC addresses
and power flags.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Simon Guinot [Tue, 1 Nov 2011 11:14:12 +0000 (16:44 +0530)]
netspace_v2: fix SDRAM configuration
Network Space (Max) v2 and Internet Space v2 boards have different
SDRAM configuration and size: respectively 256MB (DDR2 1Gb, 128Mbx8
organisation) and 128MB (DDR2 512Mb, 64Mbx8 organisation). To handle
the differences, this patch add a dedicated kwimage.cfg file for
Internet Space v2.
Additionnaly the number of SDRAM banks is fixed.
Signed-off-by: Simon Guinot <simon.guinot@sequanux.org>
Lei Wen [Tue, 1 Nov 2011 10:55:56 +0000 (16:25 +0530)]
armada100: define CONFIG_SYS_CACHELINE_SIZE
By default, on Armada100 SoC DCache Lnd ICache line
lengths are 32 bytes long
Signed-off-by: Lei Wen <leiwen@marvell.com>
Lei Wen [Tue, 1 Nov 2011 10:55:56 +0000 (16:25 +0530)]
pantheon: define CONFIG_SYS_CACHELINE_SIZE
By default, on Pantheon SoC DCache Lnd ICache line
lengths are 32 bytes long
Signed-off-by: Lei Wen <leiwen@marvell.com>
Michael Walle [Mon, 31 Oct 2011 14:52:58 +0000 (20:22 +0530)]
kirkwood: define CONFIG_SYS_CACHELINE_SIZE
By default, on Kirkwood SoC DCache Lnd ICache line
lengths are 32 bytes long
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Mike Frysinger [Mon, 31 Oct 2011 14:33:38 +0000 (20:03 +0530)]
kirkwood: drop empty asm-offsets.s file
This generated file does not belong in the tree -> punt.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>
Holger Brunck [Tue, 27 Sep 2011 02:54:31 +0000 (02:54 +0000)]
arm/km/mgcoge3un: enhance "waitforne" feature
The mgcoge3un waits to be released from mgcoge3ne at startup.
This patch enhances this feature with the possibility to interrupt
this wait if a key is pressed.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Holger Brunck [Tue, 27 Sep 2011 02:54:30 +0000 (02:54 +0000)]
arm/km: add variable waitforne to mgcoge3un
Add this board specific variable to the default environment
of this board.
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
cc: Prafulla Wadaskar <prafulla@marvell.com>
Ajay Bhargav [Mon, 31 Oct 2011 11:57:46 +0000 (17:27 +0530)]
gplugD: Fix for error:MACH_TYPE_SHEEVAD undeclared
This patch fix the build failure (error: 'MACH_TYPE_SHEEVAD' undeclared
(first use in this function)) for gplugD due to recent sync of
mach-types.h with its linux original.
Signed-off-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
Anatolij Gustschin [Sat, 29 Oct 2011 11:19:47 +0000 (11:19 +0000)]
ARM: dreamplug: fix compilation
Fix build issues:
mvrtc.c: In function 'rtc_get':
mvrtc.c:45: warning: implicit declaration of function 'readl'
mvrtc.c: In function 'rtc_set':
mvrtc.c:100: warning: implicit declaration of function 'writel'
dreamplug.c: In function 'board_early_init_f':
dreamplug.c:43: warning: implicit declaration of function 'kw_config_gpio'
dreamplug.c: In function 'board_init':
dreamplug.c:108: warning: implicit declaration of function 'kw_sdram_bar'
drivers/rtc/librtc.o: In function `rtc_set':
/home/ag/u-boot/u-boot-move-new-host/u-boot-video/drivers/rtc/mvrtc.c:92: undefined reference to `writel'
/home/ag/u-boot/u-boot-move-new-host/u-boot-video/drivers/rtc/mvrtc.c:103: undefined reference to `writel'
drivers/rtc/librtc.o: In function `rtc_reset':
/home/ag/u-boot/u-boot-move-new-host/u-boot-video/drivers/rtc/mvrtc.c:117: undefined reference to `readl'
/home/ag/u-boot/u-boot-move-new-host/u-boot-video/drivers/rtc/mvrtc.c:120: undefined reference to `readl'
drivers/rtc/librtc.o: In function `rtc_get':
/home/ag/u-boot/u-boot-move-new-host/u-boot-video/drivers/rtc/mvrtc.c:45: undefined reference to `readl'
/home/ag/u-boot/u-boot-move-new-host/u-boot-video/drivers/rtc/mvrtc.c:48: undefined reference to `readl'
...
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Jason Cooper <u-boot@lakedaemon.net>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Anatolij Gustschin [Sat, 29 Oct 2011 10:09:22 +0000 (10:09 +0000)]
ARM: DockStar: fix compilation
Fix build problem:
mvgbe.c: In function 'mvgbe_initialize':
mvgbe.c:735: warning: implicit declaration of function 'get_random_hex'
dockstar.c: In function 'board_early_init_f':
dockstar.c:43: warning: implicit declaration of function 'kw_config_gpio'
dockstar.c: In function 'board_init':
dockstar.c:113: warning: implicit declaration of function 'kw_sdram_bar'
dockstar.c: In function 'set_leds':
dockstar.c:161: warning: implicit declaration of function 'readl'
dockstar.c:161: error: dereferencing pointer to incomplete type
dockstar.c:162: warning: implicit declaration of function 'writel'
dockstar.c:162: error: dereferencing pointer to incomplete type
dockstar.c:163: error: dereferencing pointer to incomplete type
dockstar.c:164: error: dereferencing pointer to incomplete type
make[1]: *** [dockstar.o] Error 1
make: *** [board/Seagate/dockstar/libdockstar.o] Error 2
Reported-by: Roland Kletzing <devzero@web.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Prafulla Wadaskar <prafulla@marvell.com>
Anatolij Gustschin [Sat, 29 Oct 2011 11:31:19 +0000 (11:31 +0000)]
ARM: netspace_v2: fix warnings
Fix compiler warnings when compiling for netspace_v2, netspace_max_v2
and inetspace_v2:
netspace_v2.c: In function 'board_early_init_f':
netspace_v2.c:37: warning: implicit declaration of function 'kw_config_gpio'
netspace_v2.c: In function 'board_init':
netspace_v2.c:86: warning: implicit declaration of function 'kw_sdram_bar'
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Cc: Simon Guinot <simon.guinot@sequanux.org>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Tom Rini [Fri, 21 Oct 2011 12:23:07 +0000 (12:23 +0000)]
am335x: Drop board_sysinfo struct
This isn't used presumably should be a typedef if needed later.
Signed-off-by: Tom Rini <trini@ti.com>
Tom Rini [Fri, 21 Oct 2011 12:23:06 +0000 (12:23 +0000)]
am335x: Temporarily add MACH_TYPE define
This is registered and can be removed at the next sync up.
Signed-off-by: Tom Rini <trini@ti.com>
Łukasz Majewski [Wed, 26 Oct 2011 22:33:17 +0000 (22:33 +0000)]
misc:pmic:samsung Enable PMIC driver at C210 Universal target
Enable support for PMIC driver at C210 Universal reference target.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Łukasz Majewski [Mon, 17 Oct 2011 01:42:24 +0000 (01:42 +0000)]
dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p UNIVERSAL C210 target
Define the D-cache line size for S5PC210 UNIVERSAL reference target.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Łukasz Majewski [Mon, 17 Oct 2011 01:42:23 +0000 (01:42 +0000)]
dcache:s5p CONFIG_SYS_CACHELINE_SIZE added for s5p GONI target
Define the D-cache line size for S5PC110 GONI reference target.
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Acked-by: Anton Staaf <robotboy@chromium.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap [Tue, 20 Sep 2011 21:25:04 +0000 (21:25 +0000)]
smdkv310: use macro for mmc data read function address
board/samsung/smdkv310/mmc_boot.c:
Removed the typedef for "mmc data read API (copy_sd_mmc_to_mem)"
as it is used only once and replaced hard-coded API address value
by macro.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap [Tue, 20 Sep 2011 21:25:03 +0000 (21:25 +0000)]
smdkv310: use spl framework for mmc spl
smdkv310 board was using mmc_spl framework for mmc spl support.
This patch migrates the framework from mmc_spl to spl.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap [Tue, 20 Sep 2011 21:25:02 +0000 (21:25 +0000)]
SMDKV310: use get_ram_size() to validate dram size
smdkv310.c: in dram_init_banksize(void) function dram size was
initialized without validation. get_ram_size() function will
validate the bank size before initialization.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Chander Kashyap [Tue, 20 Sep 2011 21:25:01 +0000 (21:25 +0000)]
SMDKV310: Initialize board id using CONFIG_MACH_TYPE
Use CONFIG_MACH_TYPE generic macro to initialize board id.
Signed-off-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Angus Ainslie [Mon, 12 Sep 2011 10:11:58 +0000 (10:11 +0000)]
ORIGEN : use absolute paths and fix tool naming
On some hosts using relative paths will cause the build to fail. This
patch sets absolute paths for the tools directory
Get rid of MSDOS style excecutable extension
Signed-off-by: Angus Ainslie <angus.ainslie@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Angus Ainslie [Fri, 9 Sep 2011 12:02:02 +0000 (12:02 +0000)]
ORIGEN : enable device tree support
Enable passing a flattened device tree to the kernel.
Signed-off-by: Angus Ainslie <angus.ainslie@linaro.org>
Acked-by: Chander Kashyap <chander.kashyap@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Stefano Babic [Fri, 28 Oct 2011 08:23:02 +0000 (10:23 +0200)]
MX25: tx25: Fix building due to missing MACH_TYPE
Added MACH_TYPE for the tx25 to the configuration file.
The MACH_TYPE is dropped from mach-types.h after last sync
with kernel.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Helmut Raiger [Thu, 27 Oct 2011 01:31:15 +0000 (01:31 +0000)]
mx31: Add board support for HALE TT-01
This adds basic board support for TT-01 based on
the Bluetechnix i.MX31 SOM. Currently only NOR-Flash
boot is implemented.
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
Helmut Raiger [Thu, 27 Oct 2011 01:31:14 +0000 (01:31 +0000)]
mx31: add ESD control registers
This allows to initialize DDR memory in C code.
Currently all mx31 boards use assembler code (lowlevel_init.S)
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
Helmut Raiger [Thu, 27 Oct 2011 01:31:13 +0000 (01:31 +0000)]
mx31: define pins and init for UART2 and CSPI3
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Sun, 23 Oct 2011 23:58:20 +0000 (23:58 +0000)]
MX35: add support for flea3 board
The flea3 board is a custom board by CarMediaLab used
in automotive.
Network (FEC), NOR, NAND and SPI are supported.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Stefano Babic [Thu, 27 Oct 2011 12:30:27 +0000 (14:30 +0200)]
MX51: vision2: add MACH_TYPE in config file
Add the MACH type to the configuration file. Maybe the board
will be not pushed into linux ML, but it remains compatible
with older kernels.
Signed-off-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Tue, 25 Oct 2011 04:34:20 +0000 (04:34 +0000)]
vision2: Remove unused header file
errno.h is not used on this file, so remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Wed, 26 Oct 2011 09:01:00 +0000 (09:01 +0000)]
mx51evk: Remove unused get_board_rev function
No board information is passed for MX51EVK, so remove get_board_rev function.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Mon, 24 Oct 2011 08:24:28 +0000 (08:24 +0000)]
mx51evk: Remove unneeded '1' from mx51evk.h
Remove unneeded '1' from mx51evk.h.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Marek Vasut [Wed, 26 Oct 2011 00:05:44 +0000 (00:05 +0000)]
I2C: Fix mxc_i2c.c problem on imx31_phycore
The problem was caused by a global variable being used early in the boot
process.
The symptoms were on imx31_phycore board, reading the environment from I2C
EEPROM didn't work correctly and causes default environment to be loaded.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Albert ARIBAUD <albert.u.boot@aribaud.net>
Cc: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Tested-by: Anatolij Gustschin <agust@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Tue, 25 Oct 2011 01:35:37 +0000 (01:35 +0000)]
mx35pdk: Add RTC support
MX35PDK has an MC13892 PMIC. Add RTC support.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Tue, 25 Oct 2011 03:14:00 +0000 (03:14 +0000)]
mx51evk: Use GPIO API for configuring the IOMUX
GPIO API provides mxc_request_iomux function for setting the IOMUX mode.
Use this function instead of directly writing to the IOMUX register.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Mon, 24 Oct 2011 06:44:16 +0000 (06:44 +0000)]
mx51evk: Add RTC support
MX51EVK has a MC13892 PMIC. Add RTC support.
Tested via 'date' command that reads the PMIC RTC registers:
MX51EVK U-Boot > date
Date: 1970-01-01 (Thursday) Time: 0:40:35
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Fabio Estevam [Mon, 24 Oct 2011 06:44:15 +0000 (06:44 +0000)]
rtc: Make mc13783-rtc driver generic
Rename mc13783-rtc so that it can be used for both MC13783 and MC13892 PMICs.
efikamx board, for example, does use a MC13892 PMIC, but the RTC selection is currently made as:
#define CONFIG_RTC_MC13783
,which is not very obvious.
Let the MC13783 and MC13892 RTC be selected by:
#define CONFIG_RTC_MC13XXX
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Fabio Estevam [Thu, 20 Oct 2011 16:01:31 +0000 (16:01 +0000)]
qong: remove unneeded IOMUX settings
On qong board some of the USBH2 pins are set via GPR register, so don need to setup
the IOMUX for each pin individually.
Other than that, these pins should not be configured as primary function because the primary
function selects SSI functionality.
Let GPR register do the work and remove the unneeded IOMUX setup.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
projects / oweals / u-boot.git / log