Felix Fietkau [Thu, 1 Dec 2016 13:52:39 +0000 (14:52 +0100)]
kernel: add missing config symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Thu, 1 Dec 2016 13:47:30 +0000 (14:47 +0100)]
tools: cmake: import upstream patch for OpenSSL 1.1.x compatibility
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Thu, 1 Dec 2016 13:23:05 +0000 (14:23 +0100)]
xtables-addons: add CONFIG_NF_CONNTRACK_MARK=y to all kmod-* packages
Not all kmod packages depends on kmod-ipt-compat-xtables, but this
kernel config option is required for building the whole package
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Wed, 30 Nov 2016 22:25:17 +0000 (23:25 +0100)]
e2fsprogs: avoid picking up incompatible libcom_err.so
Commit
2728512 ("e2fsprogs: List all libraries explicitly") forced the
e2fsprogs build system to link libcom_err.so in various places.
Unfortunately, the krb5 package also ships a libcom_err.so with a totally
different ABI and puts it into the global staging directory which causes
e2fsprogs to pick up this wrong library, leading to the following failure:
LD blkid
../lib/libext2fs.so: undefined reference to `_et_list'
collect2: error: ld returned 1 exit status
Makefile:504: recipe for target 'blkid' failed
Change the SYSLIBS specification to explicitely link libcom_err.so.0.0
which in order to work around the problem.
In the long run, the libcom_err clash between e2fsprogs and krb5 needs to
be solved properly.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Wed, 30 Nov 2016 19:24:31 +0000 (20:24 +0100)]
mkimage: fix openssl 1.1.x compat fix with libressl
libressl sets OPENSSL_VERSION_NUMBER to 0x20000000L, which breaks API
checks based on it.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Wed, 30 Nov 2016 17:09:05 +0000 (18:09 +0100)]
tools: mkimage: fix build with OpenSSL 1.1.x (FS#182)
The OpenSSL 1.1.x version series undergone some major API changes which made
the RSA structure opaque and deprecated a number of methods, so add some
conditional compat code to make the u-boot source build again.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Wed, 30 Nov 2016 11:37:15 +0000 (12:37 +0100)]
rtc-rv5c386a: fix include path for bcm47xx_nvram.h
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Mathias Kresin [Wed, 30 Nov 2016 09:00:41 +0000 (10:00 +0100)]
docs: remove all refrences in Makefiles/scripts
The SDK Makefile still trys to copy the docs folder which was removed
with
882f4d2d63272abce8c1966983aa10178e2e971f. This causes an SDK build
error.
All other removals are just cleanup.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Alberto Bursi [Mon, 28 Nov 2016 11:48:59 +0000 (12:48 +0100)]
base-files: add a wrapper for init scripts in profile
"service" is a simple wrapper that will allow to call init.d scripts
current method: # /etc/init.d/network reload
with the wrapper: # service network reload
If the wrapper is called without arguments or with a wrong init script name, it will print an error and list the content of /etc/init.d/ folder
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Kevin Darbyshire-Bryant [Mon, 21 Nov 2016 18:18:47 +0000 (18:18 +0000)]
kernel: bump to 4.4.35
Refresh patches on all 4.4 supported platforms.
077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch
removed as now upstream.
Compile & run tested: ar71xx - Archer C7 v2
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Alberto Bursi [Mon, 28 Nov 2016 19:28:12 +0000 (20:28 +0100)]
docs: deleting docs because they are obsolete
the docs in /docs folder are pretty much obsolete and in a not very friendly format (latex, that requires to be
compiled), leaving them there only causes confusion.
LEDE documentation's place is the wiki, or the site.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Mathias Kresin [Tue, 29 Nov 2016 05:10:35 +0000 (06:10 +0100)]
lantiq: drop obsolete patch
ifxhcd never had roothub support but since kernel 3.x it was expected
that a roothub always exists.
The patched fixed a null pointer deref in the usb subsystem because of
the missing roothub.
Since ifxhcd is gone, this whole patch isn't required any longer.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 20 May 2016 21:45:59 +0000 (23:45 +0200)]
uboot-lantiq: Add BT Home Hub 5A support
Based on the submission to the uboot-lantiq repo by Martin Blumenstingl.
Use the ddr_settings.h from the GPL tarball. The NAND boot optimized
one (with memory tuning enabled) doesn't work for the UART boot image.
Use the same mtd layout as the stock u-boot. Add add UBI support.
Use the leds to indicate boot status like it is done with the stock
u-boot. Switch on the red power led if kernel image can't be loaded.
Otherwise switch the green led on.
Make only the ramboot u-boot available. Only this image is required for
the first installation of LEDE.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 3 Oct 2015 11:57:54 +0000 (13:57 +0200)]
lantiq: use BT HomeHub 5 Type A OEM partition layout
This way the on nand bad block table is preserved and used. Add support
for nand OOB ECC checksums as well. It should fix all reported ubi
errors, which were all related to bad nand blocks and a purged on nand
bad block table.
The existing ubi partition will be reused, which eliminates the need
to touch the caldata during initial install. The BT u-boot has support
for loading a kernel from an ubi volume. It isn't necessary any longer
to replace the BT u-boot with a custom compiled one to use LEDE.
It is required to restore the BT Firmware and install LEDE from scratch
to switch to the new partition layout.
An image for restoring the BT firmware and installing LEDE is provided
at https://github.com/mkresin/lede/releases.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Tue, 31 May 2016 06:39:53 +0000 (08:39 +0200)]
lantiq: backport kernel patch to pass of node to nand_dt_init
Backport upstream commit
a61ae81a1907af1987ad4c77300508327bc48b23.
The actually purpose of the patch was to do some cleanup. As a side
effect of this cleanup, the device node is now passed to nand_dt_init.
This allows to use the common nand device tree properties
- nand-bus-width
- nand-on-flash-bbt
- nand-ecc-mode
- nand-ecc-step-size
- nand-ecc-strength
for the plat_nand driver.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 6 Aug 2016 07:19:45 +0000 (09:19 +0200)]
lantiq: drop ath9k device tree binding & ath9k pci fixup
Due to the addition of the bindings to the ath9k driver, this code
isn't used any longer. The fixup is now done by the owloader.
Rename the ath_eep.c file to ath5k_eep.c to indicate that this files
includes ath5k related code only.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Martin Blumenstingl [Sat, 26 Nov 2016 00:01:15 +0000 (01:01 +0100)]
lantiq: use ath9k device tree bindings binding/owl-loader
This moves the extraction of the eeprom/calibration data to a hotplug
firmware script. Additionally it modifies all .dts to configure ath9k
directly from within the .dts.
The owl-loader approach enables support on devices with exotic eeprom
data locations (such as unaligned positions on the flash or data
inside an UBI volume).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[add ath9k caldata mac address patcher]
[fixes DGN3500 wifi mac]
[fixes BTHOMEHUBV3A wifi mac]
[set invalid mac for BTHOMEHUB2B, FRITZ3370, FRITZ7320 & FRITZ7360SL to restore previous random mac behavior]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Martin Blumenstingl [Sat, 26 Nov 2016 00:01:14 +0000 (01:01 +0100)]
kernel: mac80211: disable ath9k bands via device tree
These properties allow overriding the settings from the EEPROM
which indicate whether a band is enabled or not.
Setting this property is only needed when the RF circuit does not
support the 2.4GHz or 5GHz band while it is enabled nevertheless in the
EEPROM.
These patches will be replaced with a future upstream version which
will introduces an ieee80211 device tree property to disable bands.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Sat, 26 Nov 2016 00:01:13 +0000 (01:01 +0100)]
kernel: mac80211: add pending ath9k EEPROM swapping patches
There are two types of swapping the EEPROM data in the ath9k driver.
Before this series one type of swapping could not be used without the
other.
The first type of swapping looks at the "magic bytes" at the start of
the EEPROM data and performs swab16 on the EEPROM contents if needed.
The second type of swapping is EEPROM format specific and swaps
specific fields within the EEPROM itself (swab16, swab32 - depends on
the EEPROM format).
With this series the second part now looks at the EEPMISC register
inside the EEPROM, which uses a bit to indicate if the EEPROM data
is Big Endian (this is also done by the FreeBSD kernel).
This has a nice advantage: currently there are some out-of-tree hacks
(in OpenWrt and LEDE) where the EEPROM has a Big Endian header on a
Big Endian system (= no swab16 is performed) but the EEPROM itself
indicates that it's data is Little Endian. Until now the out-of-tree
code simply did a swab16 before passing the data to ath9k, so ath9k
first did the swab16 - this also enabled the format specific swapping.
These out-of-tree hacks are still working with the new logic, but it
is recommended to remove them. This implementation is based on a
discussion with Arnd Bergmann who raised concerns about the
robustness and portability of the swapping logic in the original OF
support patch review, see [0].
After a second round of patches (= v1 of this series) neither Arnd
Bergmann nor I were really happy with the complexity of the EEPROM
swapping logic. Based on a discussion (see [1] and [2]) we decided
that ath9k should use a defined format (specifying the endianness
of the data - I went with __le16 and __le32) when accessing the
EEPROM fields. A benefit of this is that we enable the EEPMISC based
swapping logic by default, just like the FreeBSD driver, see [3]. On
the devices which I have tested (see below) ath9k now works without
having to specify the "endian_check" field in ath9k_platform_data (or
a similar logic which could provide this via devicetree) as ath9k now
detects the endianness automatically. Only EEPROMs which are mangled
by some out-of-tree code still need the endian_check flag (or one can
simply remove that mangling from the out-of-tree code).
[0] http://www.spinics.net/lists/linux-wireless/msg152634.html
[1] https://marc.info/?l=linux-wireless&m=
147250597503174&w=2
[2] https://marc.info/?l=linux-wireless&m=
147254388611344&w=2
[3] https://github.com/freebsd/freebsd/blob/
50719b56d9ce8d7d4beb53b16e9edb2e9a4a7a18/sys/dev/ath/ath_hal/ah_eeprom_9287.c#L351
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Sat, 26 Nov 2016 00:01:12 +0000 (01:01 +0100)]
kernel: mac80211: backport ath9k device tree support patches
These patches add support for configuring ath9k based devices via
devicetree. This was tested on PCI(e) based devices. This should work
for AHB based devices as well (adding more AHB specific properties may
still be needed) as soon as the ath79 platform is ready to populate the
ath9k wmac via devicetree.
This patchset was accepted upstream, more information can be found on
the linux-wireless list:
https://www.spinics.net/lists/linux-wireless/msg155474.html
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Matthias Schiffer [Tue, 29 Nov 2016 18:53:27 +0000 (19:53 +0100)]
ar71xx: fix syntax error in /lib/ar71xx.sh
Remove all comments in ubnt_xm_board_detect(), as it's not possible to add
comments to specific lines of the case construct anyways.
Fixes:
9a5801e7 "ar71xx: add model detection for UBNT Rocket Ti"
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Matthias Schiffer [Tue, 29 Nov 2016 14:35:46 +0000 (15:35 +0100)]
ar71xx: add model detection for UBNT Rocket Ti
Based-on-patch-by: Neal Oakey <neal.oakey@bingo-ev.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Stijn Tintel [Thu, 17 Nov 2016 14:33:20 +0000 (15:33 +0100)]
kernel: have kmod-ipsec depend on kmod-crypto-echainiv
The ESP algorithms in CBC mode require echainiv, so have kmod-ipsec
depend on kmod-crypto-echainiv.
See upstream commit
32b6170ca59ccf07d0e394561e54b2cd9726038c.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Felix Fietkau [Fri, 25 Nov 2016 12:10:38 +0000 (13:10 +0100)]
brcm47xx: fix initramfs image build error
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 25 Nov 2016 12:09:58 +0000 (13:09 +0100)]
brcm47xx: merge cpu cache workaround patches into one, ensure they get compiled out on mips74k
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 29 Nov 2016 08:58:33 +0000 (09:58 +0100)]
ar71xx: remove squashfs-64k rootfs image from bin directory, the generic one is enough
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 29 Nov 2016 09:05:46 +0000 (10:05 +0100)]
ar71xx: remove split kernel/rootfs images where the sysupgrade image can be written to flash directly
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 29 Nov 2016 08:54:53 +0000 (09:54 +0100)]
ar71xx: remove 2MB flash variant of WP543
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 29 Nov 2016 08:43:36 +0000 (09:43 +0100)]
ar71xx: remove legacy devices that cannot be supported due to kernel partition size limits
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 23 Nov 2016 09:27:17 +0000 (10:27 +0100)]
ar71xx: remove legacy gzip images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Wed, 23 Nov 2016 09:21:07 +0000 (10:21 +0100)]
ar71xx: remove obsolete jffs2 image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Tue, 29 Nov 2016 07:38:24 +0000 (08:38 +0100)]
iw: drop TX power patch that is part of upstream version now
Applying it again was resulting in duplicated TX info like:
Interface wlan0
ifindex 6
wdev 0x1
addr 00:23:6a:a3:7d:00
ssid LEDE2
type AP
wiphy 0
channel 11 (2462 MHz), width: 20 MHz, center1: 2462 MHz
txpower 31.00 dBm
txpower 31.00 dBm
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 28 Nov 2016 12:14:35 +0000 (13:14 +0100)]
kernel: use upstream accepted bcm47xxpart parsing fix
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Mon, 28 Nov 2016 12:07:29 +0000 (13:07 +0100)]
bcm53xx: use upstream accepted fix for ARM core aborts
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sat, 19 Nov 2016 20:09:53 +0000 (21:09 +0100)]
firmware-utils: replace md5 code with Alexander Peslyak's implementation
Our current implementation is pretty old and uses some pre-standard/old
ANSI C style that triggers warnings like:
warning: call to function 'MD5_Init' without a real prototype [-Wunprototyped-calls]
This is caused by declarations specified in a following way:
src/md5.h:60:6: note: 'MD5_Init' was declared here
void MD5_Init ();
Having these warnings makes it harded to notice real problems. We could
try hiding them but it makes more sense to just use a cleaner code.
Another tiny gain from this switch is slightly reduced binary size, on
x86_64 tplink-safeloader's size 48104 became 48003.
The new code is public domain, uses "heavily cut-down BSD license".
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Hauke Mehrtens [Sun, 2 Oct 2016 16:39:50 +0000 (18:39 +0200)]
lantiq: add Falcon support
This adds support for the Intel Falcon SoC for GPON.
Support for the Falcon SoC was removed in commit
c8218363951 svn rev:
40392 from OpenWrt, this commit adds it again.
This patch adds a new subtarget for the Falcon SoC, but it still misses
all the drivers needed to control the GPON part.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Mathias Kresin [Sun, 27 Nov 2016 13:59:20 +0000 (14:59 +0100)]
lantiq: add swconfig to the default packages
The DEVICE_PACKAGES are not included in the initramfs image in case
TARGET_PER_DEVICE_ROOTFS is set. This might produces initramfs images
with a not working network configuration because of a missing swconfig.
Workaround the issues by adding the essential swconfig package to the
default packages selection and deselect swconfig for boards not having
swconfig included before via device packages.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Nov 2016 12:15:23 +0000 (13:15 +0100)]
ltq-hcd: drop package
Since
ffd7c155008bff4b08197dfd710d7a1386313f98 it isn't used anymore on
any supported target.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Wed, 19 Oct 2016 19:08:14 +0000 (21:08 +0200)]
gpio-button-hotplug: add more buttons
The keycodes are used by some boards.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 27 Nov 2016 08:47:51 +0000 (09:47 +0100)]
treewide: fix button keys codes used in dts
Use keycodes that matches the intended use case based on the label.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 26 Nov 2016 09:43:34 +0000 (10:43 +0100)]
ramips: add size checks/append metadata where missing
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 25 Nov 2016 12:03:01 +0000 (13:03 +0100)]
ramips: fix Airlink AR670W factory image
Move the mkwrgimg build step to the makefile. It will be required by
other boards as well.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 25 Nov 2016 16:44:24 +0000 (17:44 +0100)]
mvebu: fix typo in image metadata support
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 26 Nov 2016 09:20:03 +0000 (10:20 +0100)]
ipq806x: more dts cleanup
Remove the wifi5g LED from the the d7800, r7500 and r7800. Albeit this
GPIO is mentioned in the GPL tarball, it doesn't do anything. The
2.4/5 GHz LEDs are connected to the wifi chips and not be controlled
from the the userspace.
Use the LEDs names/colours as they are used in the board manuals. Merge
redundant LED configurations. Use the phy[0|1]tpt trigger for the
wireless LEDs. Remove the workarounds for the not controllable wireless
LEDs.
Fix spi compatible strings and remove superfluous spi-max-frequency
parameters.
If there are two power leds, use one for indicating normal operation and
one for failsafe/upgrade. Keep the on/off state of the main power led
during boot.
Use the usb pinmux settings from the nbg6817 gpl sources.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Henryk Heisig [Mon, 21 Nov 2016 20:04:52 +0000 (21:04 +0100)]
ipq806x: clean up dts files
Set the pinmux to the values found in the GPL tarballs of the boards.
Remove pinmux which are is not used (like nand pinmux for spi
flash boards).
This allows to use the wan orange led of the C2600 which had a wrong
pinmux before. Might fix buttons or leds of other boards as well.
Fix the LED color and the ledswitch key code of the C2600. Rename the
ledgnr to ledswitch.
Add support for indication the boot state using LEDs to the D7800,
NBG6817, R7500 and R7500v2.
Change GPIO active to readable values in D7800, EA8500, R7500,
R7500v2 and R7800.
Change gpioexport to gpio pinmux.
Add proper "drive strenght" to i2c4_pins and use it for RPM on
C2600, D7800, EA8500, R7500, R7500v2.
Remove pcie pinmux from D7800.
Move pinctrl to correct place in NBG6817 and R7800.
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Florian Fainelli [Wed, 23 Nov 2016 20:50:25 +0000 (12:50 -0800)]
firmware-utils: Fix build failure in mkmerakifw.c FS#298
Earlier compilers such as GCC 4 do not like anynomous unions, make it a named
union "u", and update the code where relevant.
Fixes FS#298
Fixes:
a72e1692b8b3 ("firmware-utils: Add support for the Cisco Meraki MX60/MX60W")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Julian Kornberger [Sat, 26 Nov 2016 10:15:34 +0000 (11:15 +0100)]
ipset: Add InstallDev to provide libipset as library
Martin Blumenstingl [Sat, 26 Nov 2016 00:01:11 +0000 (01:01 +0100)]
lantiq: specify the PCIe controller's interrupt, size and address cells
This allows adding devices to the PCIe controller in the .dts files.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Martin Blumenstingl [Sat, 26 Nov 2016 00:01:10 +0000 (01:01 +0100)]
lantiq: Register the device tree node with the PCIe controller
This allows specifying PCI devices as children of the PCIe controller
node to pass configuration data to them.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Yong-hyu, Ban [Sat, 26 Nov 2016 12:20:14 +0000 (21:20 +0900)]
ramips: Add missing chunked-io directive to W2914NSV2.dtsi
Fix bug that LEDE failed to boot with this message:
WARNING: CPU: 2 PID: 1 at drivers/spi/spi-mt7621.c:214
mt7621_spi_transfer_one_message+0x28c/0x620()
Signed-off-by: Yong-hyu, Ban <perillamint@gentoo.moe>
Andrew Yong [Mon, 21 Nov 2016 15:24:57 +0000 (23:24 +0800)]
ramips: SamKnows SK-WB8 DTS cleanup
Use gpio.h definition of GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW. Remove unused backup partition to increase available JFFS space. As long as U-Boot env variable "bootcount" is < 3 (reset to 0 after boot by init script) SamKnow's U-Boot will not attempt to boot from the backup flash address (0xe30000).
Signed-off-by: Andrew Yong <me@ndoo.sg>
Avi H. D [Thu, 24 Nov 2016 20:49:35 +0000 (02:19 +0530)]
kernel: fix typo in input-gpio-encoder package title
Line 115, 'rotary' was misspelled as 'rotay'
Signed off by: Avinash Duduskar <strykar@hotmail.com>
Hannu Nyman [Fri, 25 Nov 2016 14:10:09 +0000 (16:10 +0200)]
tools/cmake: update to 3.7.0
Release notes at
https://cmake.org/cmake/help/v3.7/release/3.7.html
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Hannu Nyman [Fri, 25 Nov 2016 14:08:31 +0000 (16:08 +0200)]
tools/quilt: update to 0.65
User-visible changes since 0.64 are as follows:
- Translation fixes
- Project settings have priority
- Reject binary files in patches
- Fix a race condition in diff_file
- Performance: Optimizations to the setup command
- Performance: Optimizations to the bash completion script
- Test suite: Improve the edit test case
- Test suite: Make the symlink test more robust
- Test suite: Test backup failure
- Test suite: Test the header command with hard links
- diff: Report diff failures
- edit: Fix a corner case bug
- mail: Fix the help text
- push: Fix the synopsis
- refresh: Do not remove symlinks
- refresh: Break links to read-only patch files
- refresh: Always preserve modification time
- setup: Report failed look-ups in inspect-wrapper
- quilt.el: Fix quilt-editable when patches are stored in subdirs
- bash_completion: Handle spaces in file names
- bash_completion: Update the list of commands
- bash_completion: Add new command options
- bash_completion: Fix handling of mail, new, push options
- guards: Simplify the help text
- guards: Include the file name also in the "Not found" case
- guards: Add support for an external filelist in --check mode
- guards: Report which config file has problem in --check mode
- guards: Documentation update
- guards: Clarify a user message
Note to packagers: the Makefile was modified to take configure's
--sysconfdir into account as other projects do. As a result, setting
--prefix=/usr will no longer put the configuration files under /etc.
You now need to explicitly pass --sysconfdir=/etc. If you don't,
configuration files will go under /usr/etc, which is not what you want.
This is somewhat less intuitive, but also more consistent with what
other projects are doing.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Hannu Nyman [Fri, 25 Nov 2016 14:07:11 +0000 (16:07 +0200)]
tools/scons: update to 2.5.1
RELEASE 2.5.1 - Mon, 03 Nov 2016 13:37:42 -0400
- Add scons-configure-cache.py to packaging. It was omitted
- Use memoization to optimize PATH evaluation across
all dependencies per node.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Felix Fietkau [Fri, 25 Nov 2016 19:02:56 +0000 (20:02 +0100)]
Revert "mvebu: simplify etc/board.d/02_network"
This reverts commit
539ae47103b7de5cecb1a94beab0acb97ef7df1d.
According to reports, this introduces a regression on WRT3200ACM
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Mathias Kresin [Thu, 24 Nov 2016 07:03:22 +0000 (08:03 +0100)]
ramips: remove kmod-ledtrig-usbdev from recently added devices
None of the devices uses an usb led at all.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Piotr Dymacz [Wed, 23 Nov 2016 15:34:31 +0000 (16:34 +0100)]
ar71xx: move DomyWifi DW33D to nand subtarget
This device uses NAND FLASH, so it should be kept in nand subtarget.
Also, inlcude in packages kmod-usb-ledtrig-usbport instead of
obsolete kmod-ledtrig-usbdev.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Sebastian Quilitz [Wed, 23 Nov 2016 17:51:15 +0000 (18:51 +0100)]
ipq806x: add support for TP-Link Archer VR2600v
This router is similar to the C2600. Ethernet on WAN + LAN, switch,
sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem
and the POTS/DECT interface are not supported yet.
It is not possible to flash LEDE via the TP-Link webinterface. The
image need to be signed. The first 0x200 bytes of the image is the
TP-Link header including the signature. The signature is not validated
by the bootloader. The LEDE image is zeroed in this area.
To install LEDE it is necessary to solder a four pin header to JP2.
Connect a serial interface to this header and interrupt the autostart
of kernel. Transfer the sysupgrade image via TFTP and write it to the
serial flash at 0x320000.
Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
Felix Fietkau [Thu, 24 Nov 2016 12:42:58 +0000 (13:42 +0100)]
remove bogus dev/null that was accidentally introduced while applying a patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 24 Nov 2016 12:41:10 +0000 (13:41 +0100)]
kernel: remove another redundant KCONFIG entry in virt.mk
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 24 Nov 2016 12:29:05 +0000 (13:29 +0100)]
kernel: fix virtualization kmod dependencies and kconfig symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 24 Nov 2016 12:26:04 +0000 (13:26 +0100)]
kernel: remove kmod-vhost_net, fixes build breakage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 24 Nov 2016 12:25:15 +0000 (13:25 +0100)]
sunxi: enable CONFIG_VHOST_NET like on x86
Other virtualization options are already enabled, so this is only a
small addition
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 24 Nov 2016 12:15:14 +0000 (13:15 +0100)]
kernel: add missing config symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Florian Fainelli [Wed, 23 Nov 2016 23:13:18 +0000 (15:13 -0800)]
libnl-tiny: Remove GENL_ID_GENERATE
This constant was always defined to 0, and recently got removed in
upstream commit
a07ea4d9941af5a0c6f0be2a71b51ac9c083c5e5 ("genetlink: no
longer support using static family IDs")
Fixes libnl-tiny builds with latest upstream kernels.
Fixes:
d723f2573af3 ("libnl-tiny: remove include/linux overrides to fix various build issues")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Yousong Zhou [Thu, 24 Nov 2016 05:50:03 +0000 (13:50 +0800)]
target: sunxi: enable builtin crypto-hw module sun4i-ss
CONFIG_CRYPTO_DEV_SUN4I_SS was previously set to y but did not take
effect because of the absence of CONFIG_CRYPTO_HW=y
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Thu, 24 Nov 2016 05:50:02 +0000 (13:50 +0800)]
build: find_md5: ignore non-existent files or directories
Targets like malta can have no patches/ directory available and this
commit tries quash "no such file or directory" messages from `find`
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Christian Lamparter [Wed, 23 Nov 2016 16:17:05 +0000 (17:17 +0100)]
apm821xx: make it possible to update the dtb partition on the WNDR4700
Currently, the device-tree partition is marked as read-only.
Hence, userspace tools like mtd can't write into the partition.
This however will be necessary in case the DTB needs to be
updated.
This patch also adds the kernel.dtb image, so the compiled
DTB is exported as a file and available in the binary
directory along the firmware images.
Note: the u-boot does expects the dtb to be a uimage.
To update the dtb manually:
1. copy the generated dtb to the router.
2. mtd erase /dev/mtd2
3. mtd write wndr4700.dtb /dev/mtd2
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Yousong Zhou [Wed, 23 Nov 2016 16:03:41 +0000 (00:03 +0800)]
target: sunxi: enable kvm support
Unlike x86, kvm for arm has to be built into the kernel. The kernel
config was prepared with the following command
make kernel_menuconfig CONFIG_TARGET=platform
Then enable ARM_LPAE, VIRTUALIZATION, KVM in that order
Other config changes are done by the build system. The following text
tries to explain some of them, for archive purposes probably...
- BUILD_BIN2C. It was dropped probably because the prompt is empty and
no other config option selects it. bin2c is a host executable for
converting binary content to a piece of c code for inclusion
- CRYPTO_DEV_SUN4I_SS. It was dropped because the dependency CRYPTO_HW
was not enabled. Setting that aside, packaging it as a loadbable
module in lieu of other sunxi specific modules seems more appropriate
- PGTABLE_LEVELS. It was changed from 2 to 3 because 3 is the default
when ARM_LPAE is enabled
- HAVE_KERNEL_GZIP, etc.. These are enabled in generic config
- SCHED_INFO, ZLIB_INFLATE. These were dropped probably for the same
reason as for BUILD_BIN2C
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 23 Nov 2016 16:03:40 +0000 (00:03 +0800)]
package: add kernel packages for kvm virtualization
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 23 Nov 2016 16:03:39 +0000 (00:03 +0800)]
toolchain: gcc: disable ifunc on *-musl by default
Otherwise the built binaries may fail with
Error relocating /usr/bin/qemu-system-x86_64: unsupported relocation type 37
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 23 Nov 2016 16:03:38 +0000 (00:03 +0800)]
build: scan.mk: remove not used variable SCAN_STAMP
It was left behind since rewrite of metadata scanning done with commit
bdc9419 in July 2007
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Felix Fietkau [Tue, 22 Nov 2016 16:53:36 +0000 (17:53 +0100)]
uml: clean up the kernel config and add squashfs+ext4/f2fs support
Replaces plain ext4 images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Paul Wassi [Tue, 22 Nov 2016 08:43:24 +0000 (09:43 +0100)]
package/utils/fuse: update to 2.9.7
Update fuse+libfuse to upstream 2.9.7. Drop the patch for CVE-2015-3202,
which is already integrated in the newer version. Rework the other patches.
Also switch PKG_SOURCE from @SF to libfuse's github releases.
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Paul Wassi [Fri, 28 Oct 2016 18:22:22 +0000 (20:22 +0200)]
mvebu: simplify etc/board.d/02_network
Unify switch configuration on Linksys WRTxx00AC series.
LAN = eth0, WAN = eth1
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Felix Fietkau [Mon, 21 Nov 2016 10:59:37 +0000 (11:59 +0100)]
mvebu: use image metadata for firmware validation
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Eddi De Pieri [Tue, 22 Nov 2016 09:41:18 +0000 (10:41 +0100)]
lantiq: write protect vgv7519 u-boot and u-boot-env partitions
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Eddi De Pieri [Mon, 21 Nov 2016 23:04:48 +0000 (00:04 +0100)]
uboot-envtools: make it not shared
uboot-envtools have some stuff related to the cpu.
This should fix following error on lantiq soc:
Downloading http://downloads.lede-project.org/snapshots/packages/mips_24kc/base/uboot-envtools_2015.10-1_mips_24kc.ipk.
Configuring uboot-envtools.
//usr/lib/opkg/info/uboot-envtools.postinst: .: line 10: can't open '/lib/ar71xx.sh'
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Eddi De Pieri [Mon, 21 Nov 2016 14:59:54 +0000 (15:59 +0100)]
uboot-lantiq: vgv7519 fix tftp loading of big kernel/image size
On my board:
Bytes transferred =
7084442 (6c199a hex)
Image Name: MIPS OpenWrt Linux-3.10.49
Created: 2014-11-11 17:40:00 UTC
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size:
7084378 Bytes = 6.8 MiB
Load Address:
80002000
Entry Point:
80002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... LZMA: uncompress or overwrite error
7 - must RESET b
ROM VER: 1.0.5
CFG 01
Signed-off-by: Eddi De Pieri <eddi@depieri.net>
Giuseppe Lippolis [Sun, 13 Nov 2016 22:36:00 +0000 (23:36 +0100)]
ramips: Add device DLINK DWR-512-B
The Dlink DWR-512-B modem is a ralink 5350 processor based embedding
a 3G mini-pcie router.
The oem JBOOT bootloader has to be replaced by a RT5350 SDK
U-Boot such as https://github.com/stevenylai/ralink_sdk - U-Boot
configured for the RT5350 256MiB SDR.
Main reason to change the bootloader is the encrypted header used to
store the kernel image. In this way an image can only be generated
using the propietary binboy tool (included in the GPL distribution
from Dlink). The binboy tool doesn't allow to modify the kernel/rootfs
partition scheme. This is considered a big constraint (limited kernel
size and inefficient usage of flash space).
For interested people I pubblished the details of my investigation
about the encrypted firmware header here:
http://lists.infradead.org/pipermail/lede-dev/2016-October/003435.html
Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
Mathias Kresin [Sun, 20 Nov 2016 20:28:38 +0000 (21:28 +0100)]
ramips: do not append metadata to CY-SWR1100 factory image
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Fri, 18 Nov 2016 07:39:05 +0000 (08:39 +0100)]
ramips: cleanup dts files of mt7621 based boards
Fix a typo in mt7621.dtsi compatible string. Disable spi, sdhci and pci
in mt7621.dtsi and enable the nodes in the indiviual board dts files.
The nodes require further device specific configuration anyway.
Remove the m25p80@0 spi child node from mt7621.dtsi and add the
chunked-io parameter to the individual board dts files. Fix the spi
flash compatible string for the WNDR3700V5.
Drop the mt7621-eval-board compatible string for all boards which are
not the eval board.
Drop the linux,modalias parameter from spi flash node.
Remove the xhci node from board files, it is already enabled in dtsi.
Disable xhci for boards not having usb ports populated.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 19 Nov 2016 17:27:22 +0000 (18:27 +0100)]
ramips: order mt7621.mk alphabetical
Signed-off-by: Mathias Kresin <dev@kresin.me>
Ben Greear [Wed, 16 Nov 2016 20:18:59 +0000 (12:18 -0800)]
ath10k-ct-firmware: Update to latest firmwares.
The 10.1 includes a good many stability fixes related to the effort of
backporting upstream 10.2 firmware. Also enables 802.1q vlan support.
Successfully tested on apu2.
The 10.4 firmwares including new backported code as well as stability
fixes. 10.4 has been tested on Fedora x86-64 platforms, but not on LEDE
specifically since I had issues compiling LEDE for my 9980/9984 AP hardware.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Ben Greear [Wed, 16 Nov 2016 20:18:58 +0000 (12:18 -0800)]
ath10k-ct: Update to latest.
Fixes locking issue, quietens some potential message floods.
Signed-off-by: Ben Greear <greearb@candelatech.com>
Felix Fietkau [Tue, 22 Nov 2016 09:48:11 +0000 (10:48 +0100)]
netifd: update to the latest version
Fixes config reload on bridge MAC address changes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Gonzalez Cabanelas [Mon, 29 Aug 2016 14:03:49 +0000 (16:03 +0200)]
brcm63xx: Livebox 1: add userspace board support
Fix configuration files for the Livebox 1 routers.
- Add status led
- Set eth0 as the LAN port, for coherence with RedBoot and comfortability.
- Add led triggers
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Daniel Gonzalez Cabanelas [Mon, 29 Aug 2016 14:03:33 +0000 (16:03 +0200)]
brcm63xx: Livebox 1: relocate the kernel to fix boot
Fix Image generation for the Livebox 1
- missing "relocate-kernel", wrong "LOADADDR", fix it
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Daniel Gonzalez Cabanelas [Mon, 29 Aug 2016 14:03:14 +0000 (16:03 +0200)]
brcm63xx: Livebox 1: fix part probe name
Fix the DTS file for the Livebox 1 routers:
- part probe wrong, it should be RedBoot (uppercase matters)
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Daniel Gonzalez Cabanelas [Mon, 29 Aug 2016 14:02:49 +0000 (16:02 +0200)]
brcm63xx: Livebox 1: fix led naming
Fix the DTS file for the Livebox 1 routers:
- leds are totally wrong, fix them.
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Daniel Gonzalez Cabanelas [Mon, 29 Aug 2016 14:02:38 +0000 (16:02 +0200)]
brcm63xx: Livebox 1: use button 1 as failsafe button
Fix the DTS file for the Livebox 1 routers:
- no failsafe button, use button 1 for this purpose
Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Mon, 21 Nov 2016 14:47:48 +0000 (15:47 +0100)]
base-files: ignore failure of stopping services on removal
Packages that do a killall <cmd> with the same name as the init script
will fail the prerm step when the service isn't running. Do make them
removable without having to restart the service, ignore the return code.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Jonas Gorski [Mon, 21 Nov 2016 14:20:32 +0000 (15:20 +0100)]
opkg: run prerm scripts for the old version also on upgrade
To make sure we properly restart services on upgrade we need to
call the prerm script of the old package, in case the init script
changes (or vanishes).
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Jonas Gorski [Mon, 21 Nov 2016 14:16:07 +0000 (15:16 +0100)]
base-files: don't modify enabled state of service on upgrade
Properly stop/start services on upgrade, but don't change the enabled
state.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Jonas Gorski [Mon, 21 Nov 2016 14:14:02 +0000 (15:14 +0100)]
opkg: set PKG_UPGRADE also when running scripts for the old package
Allow scripts from the package to be upgraded to be aware of being
upgraded.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
John Crispin [Mon, 21 Nov 2016 15:49:07 +0000 (16:49 +0100)]
Revert "grub2: add PKG_FIXUP:=autoreconf"
this caused build errors on x86
This reverts commit
a0ea22ac430f91ab045431a79b2e2161e66cd56a.
Signed-off-by: John Crispin <john@phrozen.org>
Andrew Yong [Mon, 21 Nov 2016 16:53:00 +0000 (00:53 +0800)]
ramips: fix wrong check for MT7621AT
fix in sdhci Use ralink_soc == MT762X_SOC_MT7621AT instead of CONFIG_SOC_MT7621 which is
wrong and breaks builds on mt7620a-similar platforms (MT7621, MT7688)
Signed-off-by: Andrew Yong <me@ndoo.sg>
Felix Fietkau [Mon, 21 Nov 2016 15:13:23 +0000 (16:13 +0100)]
lantiq: add missing metadata for tp-link images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Thu, 17 Nov 2016 06:25:21 +0000 (07:25 +0100)]
scripts/getver.sh: treat all commits as local if can't find upstream
If something goes wrong and script can't find upstream revision it will
return something like:
r2220
which looks like a valid upstream revision 2220. We cant' distinguish it
from e.g. 2200 upstream commits and 20 local ones.
The new format still provides revision number but also points clearly
that is may be not the upstream one:
r0+2220
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: John Crispin < john@phrozen.org>