Clarify NOTES.WIN.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Update and clarify ECDSA documentation.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Disable afalg when engine is disabled.

Also make it possible to disable afalg separately.

we still need to update config again

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix typo in manual, missing ending '>'

Reviewed-by: Stephen Henson <steve@openssl.org>

Travis: build tests in BUILDONLY mode

Reviewed-by: Richard Levitte <levitte@openssl.org>

config: fix HP-UX PA-RISC detection.

Reviewed-by: Richard Levitte <levitte@openssl.org>

s390x assembly pack: 32-bit fixups.

Reviewed-by: Richard Levitte <levitte@openssl.org>

build.info/Makefile.in: Itanium fixups.

Reviewed-by: Richard Levitte <levitte@openssl.org>

engines/Makefile.in: some [older] shell complain about 'for i ;',
but not if there is reference to empty variable.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix the init cleanup order

There are internal dependencies between the various cleanup functions.
This re-orders things to try and get that right.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add some missing cleanup calls to de-init

OBJ_cleanup() doesn't always get called from EVP_cleanup() so needs to be
explicitly called in de-init. Also BIO_sock_cleanup() also needs to be
called.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix freeze in config's interrupt trap with some shells

With bash and zsh, the trap on the 5 second read does respond, but
doesn't break out of the read.  What's worse is that it takes away the
5 second timer, and therefore has the read hang indefinitely and
(almost) unbreakable.

Having the trap do 'exit 0' after reseting the tty params has it break
out of read and continue with the configuration.

Other shells do not appear to have the issue described here, but
neither does the extra 'exit 0' appear to harm them.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Enforce the demand for Perl 5.10.0 as a minimum.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Fix a few Configure errors

Reviewed-by: Andy Polyakov <appro@openssl.org>

Document X509_get_serialNumber and X509_set_serialNumber.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Add EVP_PKEY documentation.

Document EVP_PKEY_id() and EVP_PKEY_base_id().

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Change an function macro for ERR match the function it's used in.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Complete incomplete makefile variable referenses

A couple of '$(PERLASM_SCHEM' had sneaked in.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Collect the names of generated files and clean them away at target clean:

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add $(LIB_CFLAGS) for any build.info generator that uses $(CFLAGS)

The reason to do so is that some of the generators detect PIC flags
like -fPIC and -KPIC, and those are normally delivered in LD_CFLAGS.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Use single quotes rather than double quotes when needed

When passing down values to Makefile.shared, do so with single quotes
as much as possible to avoid having the shell create a mess of quotes.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Harmonize Unix Makefile template with Windows dito

The variable SHARED_CFLAGS and SHARD_LDFLAGS were used in the Unix
template because they normally contain options used when building
"shared".  The Windows template, on the other hand, uses LIB_CFLAGS,
to express the intended use of those flags rather than their content.
The Windows template still used SHARED_LDFLAGS, which seems
inconsistent.

To harmonize the two, any SHARED_CFLAGS gets renamed to LIB_CFLAGS and
SHARED_LDFLAGS to LIB_LDFLAGS.  That makes the intent consistent along
with BIN_{C,LD}FLAGS and DSO_{C,LD}FLAGS.

Finally, make sure to pass down $(LIB_CFLAGS) or $(DSO_CFLAGS) along
with $(CFLAGS) when using Makefile.shared.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix memory leak in library deinit

ENGINE_cleanup calls CRYPTO_free_ex_data and therefore,
CRYPTO_cleanup_all_ex_data - which cleans up the method pointers - must
run after ENGINE_cleanup.

Additionally, don't needlessly initialize the EX_CALLBACKS stack during
e.g. CRYPTO_free_ex_data. The only time this is actually needed is when
reserving the first ex data index. Specifically, since sk_num returns -1
on NULL input, the rest of the code already handles a NULL method stack
correctly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add doc on when to use SCT callback.

With help from Viktor.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Workaround for false -Warray-bounds in Travis

ccache + clang produces a false strcmp warning, see
https://llvm.org/bugs/show_bug.cgi?id=20144

Since this only happens with ccache and --strict-warnings, and
only with certain versions of glibc / clang, disabling
ccache is a reasonable short-term workaround.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix no-comp build

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix build break; add function declaration

Reviewed-by: Richard Levitte <levitte@openssl.org>

When creating directory specs, use srctop_dir rather than srctop_file.

While insignificant on Unix like systems, this is significant on
systems like VMS.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>

Avoid sed for dependency post-processing

It turns out that different sed implementations treat -i differently
to cause issues.  make it simpler by avoiding it entirely and give
perl the trust to be consistent enough.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Because bn_expand2 is declared non-static, it must not be static

That doesn't change even to make a dummy to hide its unavailability.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove some dead code from 1999

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't clobber the last error

On Windows we call WSAGetLastError() to find out the last error that
happened on a socket operation. We use this to find out whether we can
retry the operation or not. You are supposed to call this immediately
however in a couple of places we logged an error first. This can end up
making other Windows system calls to get the thread local error state.
Sometimes that can clobber the error code, so if you call WSAGetLastError()
later on you get a spurious response and the socket operation looks like
a fatal error.

Really we shouldn't be logging an error anyway if its a retryable issue.
Otherwise we could end up with stale errors on the error queue.

Reviewed-by: Richard Levitte <levitte@openssl.org>

removed extra define

verified that build succeeds without the extra define
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-blake2 for Windows classic build

Fix no-blake2 for Windows classic build
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make X509_SIG opaque.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Some sed implementations are not greedy enough, use perl instead

The issue is demonstrated as follows:

  On Linux:

    $ echo ': foo.h /usr/include/stddef.h bar.h' | sed -e 's/ \/\(\\.\|[^ ]\)*//g'
    : foo.h bar.h

  On MacOS X:

    $ echo ': foo.h /usr/include/stddef.h bar.h' | sed -e 's/ \/\(\\.\|[^ ]\)*//g'
    : foo.husr/include/stddef.h bar.h

Perl is more consistent:

  On Linux:

    $ echo ': foo.h /usr/include/stddef.h bar.h' | perl -pe 's/ \/(\\.|[^ ])*//g;'
    : foo.h bar.h

  On MacOS X:

    $ echo ': foo.h /usr/include/stddef.h bar.h' | perl -pe 's/ \/(\\.|[^ ])*//g;'
    : foo.h bar.h

Reviewed-by: Andy Polyakov <appro@openssl.org>

Make update to catch function renames.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Use unsigned int instead of just unsigned.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Save leaf_node and node_offset as character array

They are not numbers in the machine byte order.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Review comments

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Add blake2 support.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

move DSA_SIG definition into C source file

Reviewed-by: Rich Salz <rsalz@openssl.org>

crypto/*/build.info: make it work on ARM platforms.

Reviewed-by: Richard Levitte <levitte@openssl.org>

crypto/*/build.info: SPARC-specific fixups.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Configurations/unix-Makefile.tmpl: don't leave empty .s files behind.

If pre-processor failed, an empty .s file could be left behind,
which could get successfully compiled if one simply re-ran make
and cause linking failures. Not anymore. Remove even intermediate .S
in case of pre-processor failure.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Configure: remove dependency on 'head'.

Reviewed-by: Richard Levitte <levitte@openssl.org>

constify CT_POLICY_EVAL_CTX getters

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Surround ctx_set_ctlog_list_file() with #ifndef OPENSSL_NO_CT

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Suppress CT warnings in test_ssl

Running test_ssl with HARNESS_VERBOSE results in lots of spurious warnings
about an inability to load the CT config file. This fixes it.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Avoid getting unresolved referense to bn_expand2 in test/bntest.c

Issue identified on Solaris by Erik Forsberg <erik@efca.com>

Reviewed-by: Rich Salz <rsalz@openssl.org>

Call CONF_modules_free() before ENGINE_cleanup() in auto-deinit

During auto de-init we were calling ENGINE_cleanup(), and then later
CONF_modules_free(). However the latter function can end up calling
engine code, which can lead to a use of the global_engine_lock after it
has already been freed. Therefore we should swap the calling order of
these two functions.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix no-rmd160 classic Windows build

no-ripemd was unified a while ago but the change was not done in mk1mf.pl. This commit changes the no-ripemd string to no-rmd160 which fixes the no-rmd160 classic build.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't build dynamic engines unless configured "shared"

Experience has shown that dynamic engines with their own copy of
libcrypto is problematic, so we disable that possibility.

Reviewed-by: Matt Caswell <matt@openssl.org>

Harmonise the two methods to generate dependency files

One of them didn't clean away .d.tmp files properly.
The other would overwrite the .d files unconditionally, thereby
causing a possibly unnecessary dependency rebuild, which touches the
date of Makefile, which causes a possibly unnecessary rebuild of
buildinf.h and everything that depends on that.

Reviewed-by: Andy Polyakov <appro@openssl.org>

More tweaks to the installation instructions

A few things were out of date and a few things were missing. Also some
formatting updates.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix some assembler generating scripts for better unification

Some of these scripts would recognise an output parameter if it looks
like a file path.  That works both in both the classic and new build
schemes.  Some fo these scripts would only recognise it if it's a
basename (i.e. no directory component).  Those need to be corrected,
as the output parameter in the new build scheme is more likely to
contain a directory component than not.

Reviewed-by: Andy Polyakov <appro@openssl.org>

Add include directory options for assembler files that include from crypto/

A few were missed in the previous commit.

Closes RT#4412

Reviewed-by: Rich Salz <rsalz@openssl.org>

check reviewer --reviewer=emilia
Use SSL_get_SSL_CTX instead of passing SSL_CTX to s_client.c:print_stuff

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

check reviewer --reviewer=emilia
Pass entire CTLOG_STORE to SCT_print, rather than just the SCT's CTLOG

SCT_print now looks up the correct CT log for you.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

check reviewer --reviewer=emilia
Remove 'log' field from SCT and related accessors

In order to still have access to an SCT's CTLOG when calling SCT_print,
SSL_CTX_get0_ctlog_store has been added.

Improved documentation for some CT functions in openssl/ssl.h.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Add include directory options for assembler files that include from crypto/

Closes RT#4406

Reviewed-by: Rich Salz <rsalz@openssl.org>

In the recipe using "makedepend", make sure the object file extension is there

Reviewed-by: Stephen Henson <steve@openssl.org>

Configure - don't trust $1 to stick around, save its value away

Reviewed-by: Stephen Henson <steve@openssl.org>

Fix a memory leak in the afalg engine

The AFALG engine created a global EVP_CIPHER instance but was not freeing
it up when the engine was destroyed.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Harmonize the option processing in 'config' and 'config.com'

The help text for -d in 'config' was aged, and the option processing
in 'config.com' was just different.  This harmonizes 'config.com' with
the instructions in INSTALL and both current reality.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add cleaning targets to Configurations/windows-makefile.tmpl

Reviewed-by: Matt Caswell <matt@openssl.org>

The typedef ECPARAMETERS is already defined, don't define it anew

Reviewed-by: Matt Caswell <matt@openssl.org>

Allow OPENSSL_NO_SOCK in e_os.h even for non-Windows/DOS platforms

UEFI needs this too. Don't keep it only in the Windows/DOS ifdef block.

This is a fixed version of what was originally commit 963bb62195 and
subsequently reverted in commit 37b1f8bd62. Somewhere along the way, the
Windows/DOS ifdef actually got removed, leaving it just broken. It should
have been turned into an #elif, not removed.

This one correctly changes the logic from

    # if WINDOWS|DOS
    #  if OPENSSL_NO_SOCK
        ... no-sock ...
    #  elif !DJGPP
        ... native windows ...

to

    # if OPENSSL_NO_SOCK
       ... no-sock ...
    # elif WINDOWS|DOS
    #  if !DJGPP
        ... native windows ...

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove a missed item from the old thread API

A line from cryptlib.h was missed during the old Thread API removal. This
breaks no-deprecated builds.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Mark SRP_VBASE_get_by_user() as deprecated

The function SRP_VBASE_get_by_user() is declared as deprecated but the
implementation was not.

Reviewed-by: Rich Salz <rsalz@openssl.org>

No need to call EVP_CIPHER_CTX_init after EVP_CIPHER_CTX_new

The afalgtest was unnecessarily initing an EVP_CIPHER_CTX. It is not
needed and is deprecated.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Pass down inclusion directories to source file generators

The source file generators sometimes use $(CC) to post-process
generated source, and getting the inclusion directories may be
necessary at times, so we pass them down.

RT#4406

Reviewed-by: Rich Salz <rsalz@openssl.org>

Travis - add missing semi-colon

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update .gitignore to ignore all cscope files

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>

remove ms/.rnd and add it to .gitignore

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>

RT3676 add: Export ASN.1 DHparams

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Travis - don't use ccache with cross compiles

Although theoretically possible, Configure doesn't treat CC variable
set like this very well: CC="ccache i686-w64-mingw32-gcc"
Also, this Travis script doesn't recognise the possibility either.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Avoid negative array index in BIO_debug_callback()

BIO_snprintf() can return -1 on truncation (and overflow as of commit
9cb177301fdab492e4cfef376b28339afe3ef663).  Though neither can
realistically occur while printing a pointer and short fixed string into
a buffer of length 256, the analysis to confirm that this the case goes
somewhat far up the call chain, and not all static analyzers can
successfully follow the chain of logic.

It's easy enough to clamp the returned length to be nonnegative before
continuing, which appeases the static analyzer and does not harm the
subsequent code.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

CT: check some GeneralizedTime return values

Some of the ASN.1 routines for the GeneralizedTime type can return
errors; check for these and do not continue past failure, so as
to appease coverity.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

When configured "shared", don't build static libraries on Windows

The reason for this is that the static libraries and the DLL import
libraries are named the same on Windows.  When configured "shared",
the static libraries are unused anyway.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make util/mk1mf.pl recognise no-weak-ssl-ciphers

Reviewed-by: Rich Salz <rsalz@openssl.org>

Avoid double-free in calleres to OCSP_parse_url

set pointers to NULL after OPENSSL_free before returning to caller to
avoid possible double-free in caller

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix return type for CRYPTO_THREAD_run_once

return type should be int and not void

Signed-off-by: Rich Salz <rsalz@akamai.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Add X509_CHECK_FLAG_NEVER_CHECK_SUBJECT flag

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>

Remove duplicate typedef of ECPKPARAMETERS in ec.h

Reviewed-by: Stephen Henson <steve@openssl.org>

Run make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #2296

Travis - the source directory is _srcdist, not _srcdir

Reviewed-by: Stephen Henson <steve@openssl.org>

Correct slight logic error in processing IF in build.info

This corrects a fault where the inner IF in this example was still
being acted upon:

  IF[0]
    ...whatever...
    IF[1]
      ...whatever more...
    ENDIF
  ENDIF

With this change, the inner IF is skipped over.

Reviewed-by: Matt Caswell <matt@openssl.org>

When grepping something starting with a dash, remember to use -e

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>

Deprecate the use of version-specific methods

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1824

Use version flexible method instead of fixed version

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1824

Use minimum and maximum protocol version instead of version fixed methods

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1824

Fix usage of OPENSSL_NO_*_METHOD

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1824

Move disabling of RC4 for DTLS to the cipher list.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Remove DES cipher alias

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Update ciphers -s documentation

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Document SSL_get1_supported_ciphers

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

IDEA is not supported in TLS 1.2

This currently seems to be the only cipher we still support that should get
disabled.

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595

Add support for minimum and maximum protocol version supported by a cipher

Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
MR: #1595