Add verification of proxy certs to 25-test_verify.t

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Create some proxy certificates

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Make it possible to generate proxy certs with test/certs/mkcert.sh

This extends 'req' to take more than one DN component, and to take
them as full DN components and not just CN values.  All other commands
are changed to pass "CN = $cn" instead of just a CN value.

This adds 'genpc', which differs from the other 'gen*' commands by not
calling 'req', and expect the result from 'req' to come through stdin.

Finally, test/certs/setup.sh gets the commands needed to generate a
few proxy certificates.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Allow proxy certs to be present when verifying a chain

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Fix proxy certificate pathlength verification

While travelling up the certificate chain, the internal
proxy_path_length must be updated with the pCPathLengthConstraint
value, or verification will not work properly.  This corresponds to
RFC 3820, 4.1.4 (a).

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

Check that the subject name in a proxy cert complies to RFC 3820

The subject name MUST be the same as the issuer name, with a single CN
entry added.

RT#1852

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Stephen Henson <steve@openssl.org>

RT3925: Remove trailing semi from macro

Reviewed-by: Andy Polyakov <appro@openssl.org>

apps/req.c: Increment the right variable when parsing '+'

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove pointless free loop in X509_TRUST_cleanup()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1194)

Remove pointless free loop in X509_PURPOSE_cleanup()

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1194)

doc and comment fixes

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1233)

crypto/evp/e_aes_cbc_hmac_sha256.c: Remove spurious memset

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1231)

RT3136: Remove space after issuer/subject

Reviewed-by: Richard Levitte <levitte@openssl.org>

Make DSA_SIG and ECDSA_SIG getters const.

Reorder arguments to follow convention.

Also allow r/s to be NULL in DSA_SIG_get0, similarly to ECDSA_SIG_get0.

This complements GH1193 which adds non-const setters.

Reviewed-by: Rich Salz <rsalz@openssl.org>

rand/randfile.c: remove obsolete commentary.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Tests should check validation status directly

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Test SCT lists

This encompasses what was previously tested.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

aes/asm/bsaes-armv7.pl: omit redundant stores in XTS subroutines.

Reviewed-by: Rich Salz <rsalz@openssl.org>

aes/asm/bsaes-armv7.pl: fix XTS decrypt test failure.

RT#4578

Reviewed-by: Rich Salz <rsalz@openssl.org>

Change the RAND_file_name documentation accordingly

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>

Change default directory for the .rnd file on Windows and VMS

The previous change for Windows wasn't quite right.  Corrected to use
%HOME%, %USERPROFILE% and %SYSTEMPROFILE%, in that order.

Also adding the default home for VMS, SYS$LOGIN:

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>

Add a comment after some #endif at end of apps source code.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Useless header include of openssl/rand.h

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Useless includes

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Missing NULL check on OBJ_dup result in x509_name_canon

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Fix an MSVC warning.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1168)

Use a STACK_OF(OPENSSL_CSTRING) for const char * stacks

Better than losing the const qualifier.

RT4378

Reviewed-by: Richard Levitte <levitte@openssl.org>

OpenBSD has intypes.h

Update e_os2.h so that inttypes.h is included.

RT4378

Reviewed-by: Richard Levitte <levitte@openssl.org>

Replace 4 casts with 1

Changing the type of the |str| variable in asn1pars enables us to remove
4 casts with just 1. This silences an OpenBSD warning along the way.

RT4378

Reviewed-by: Richard Levitte <levitte@openssl.org>

Improve const correctness for stacks of EVP_MD

EVP_MDs are always const, so stacks of them should be too. This silences
a warning about type punning on OpenBSD.

RT4378

Reviewed-by: Richard Levitte <levitte@openssl.org>

constify SRP

Add const qualifiers to lots of SRP stuff. This started out as an effort
to silence some "type-punning" warnings on OpenBSD...but the fix was to
have proper const correctness in SRP.

RT4378

Reviewed-by: Richard Levitte <levitte@openssl.org>

Avoid type punning warnings in b_addr.c

RT4378

Reviewed-by: Richard Levitte <levitte@openssl.org>

Change default directory for storing the .rnd file on Windows

Previously we would try %RANDFILE%, then %HOME% and finally "C:".
Unfortunately this often ends up being "C:" which the user may not
have write permission for.

Now we try %RANDFILE% first, and then the same set of environment vars
as GetTempFile() uses, i.e. %TMP%, then %TEMP%, %USERPROFILE% and
%SYSTEMROOT%. If all else fails we fall back to %HOME% and only then "C:".

Reviewed-by: Rich Salz <rsalz@openssl.org>

Harmonise the different build files

- User targets are now the same and generally do the same things
- configdata.pm depends on exactly the same files on all platforms
- VMS production of shared libraries is simplified
- VMS automatic dependency files get the extension .D rather than .MMS

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix GCC build; make update; fix number re-use

Reviewed-by: Richard Levitte <levitte@openssl.org>

Spelling fixes

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1219)

no-ripemd is an alias for no-rmd160

mkdef.pl was failing to understand no-ripemd. This is a deprecated option
which should act as an alias for no-rmd160.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix build break.

Aggregate local initializers are rarely portable (:

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add EVP_PKEY_get0_hmac() function

Before the addition of this function, it was impossible to read the
symmetric key from an EVP_PKEY_HMAC type EVP_PKEY.

Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1217)

Revert "RT4526: Call TerminateProcess, not ExitProcess"

This reverts commit 9c1a9ccf65d0ea1912675d3a622fa8e51b524b9e.

TerminateProcess is asynchronous, so the code as written in the above
commit is not correct. It is also probably not needed in the speed
case. Reverting in order to figure out the correct solution.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Skip the TLSProxy tests if environmental problems are an issue

On some platforms we can't startup the TLSProxy due to environmental
problems (e.g. network set up on the build machine). These aren't OpenSSL
problems so we shouldn't treat them as test failures. Just visibly
indicate that we are skipping the test.

We only skip the first time we attempt to start up the proxy. If that works
then everything else should do...if not we should probably investigate and
so report as a failure.

This also removes test_networking...there is a danger that this turns into
a test of user's environmental set up rather than OpenSSL.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix the build and tests following constification of DH, DSA, RSA

Misc fixes following the constification of the DH, DSA and RSA
getters.

Reviewed-by: Stephen Henson <steve@openssl.org>

Change the return type of EVP_EncodeUpdate

Previously EVP_EncodeUpdate returned a void. However there are a couple
of error conditions that can occur. Therefore the return type has been
changed to an int, with 0 indicating error and 1 indicating success.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Deal with the consequences of constifying getters

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Constify the parameter getters for RSA, DSA and DH

Including documentation changes

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

RT4526: Call TerminateProcess, not ExitProcess

Reviewed-by: Richard Levitte <levitte@openssl.org>

Constify input buffers of some X509V3 and X509_PURPOSE -related methods

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Constify X509_TRUST_add method.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Constify asn1/asn_mime.c

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Constify some input buffers in asn1

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Constify CMS_get0_type input

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Constify UI

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Constify PKCS12_create, PKCS12_add_key, PKCS12_add_safe.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Constify some conf_mod.c internal methods

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1215)

Change (!seqtt) to (seqtt == NULL)

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

Always check that the value returned by asn1_do_adb() is non-NULL

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>

perlasm/x86*.pl: add endbranch instruction.

For further information see "Control-flow Enforcement Technology
Preview" by Intel.

Reviewed-by: Rich Salz <rsalz@openssl.org>

modes/asm/ghashp8-ppc.pl: improve performance by 2.7x.

Reviewed-by: Rich Salz <rsalz@openssl.org>

aes/asm/aesp8-ppc.pl: implement "tweak chaining".

This is useful in Linux kernel context, in cases data happens
to be fragmented and processing can take multiple calls.

Reviewed-by: Rich Salz <rsalz@openssl.org>

test/evptests.txt: add more XTS tests.

Reviewed-by: Rich Salz <rsalz@openssl.org>

evp/e_aes.c: wire hardware-assisted XTS subroutines.

Reviewed-by: Rich Salz <rsalz@openssl.org>

aes/asm/aesp8-ppc.pl: add XTS subroutines.

Reviewed-by: Rich Salz <rsalz@openssl.org>

(Temporarily) don't download clang package

Reviewed-by: Emilia Käsper <emilia@openssl.org>

perlasm/x86_64-xlate.pl: add commentary.

Reviewed-by: Rich Salz <rsalz@openssl.org>

perlasm/x86_64-xlate.pl: refactor argument parsing loop.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make x86_64-xlate.pl 'use strict' clean.

use strict would have caught a number of historical bugs in the perlasm
code, some in the repository and some found during review. It even found
a fresh masm-only bug (see below).

This required some tweaks. The "single instance is enough" globals got
switched to proper blessed objects rather than relying on symbolic refs.
A few types need $opcode passed in as a result.

The $$line thing is a little bit of a nuisance. There may be a clearer
pattern to use instead.

This even a bug in the masm code.
9b634c9b37afc482a8dc8868e367bdd1b650e507 added logic to make labels
global or function-global based on whether something starts with a $,
seemingly intended to capture the $decor setting of '$L$'. However, it
references $ret which is not defined in label::out. label::out is always
called after label::re, so $ret was always the label itself, so the line
always ran.

I've removed the regular expression so as not to change the behavior of
the script. A number of the assembly files now routinely jump across
functions, so this seems to be the desired behavior now.

GH#1165

Signed-off-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

VMS: use BLDDIR rather than BUILDDIR in descrip.mms.tmpl

Just like in the other build file templates

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a developer target 'build_generated' to rebuild mandatory headers

Reviewed-by: Rich Salz <rsalz@openssl.org>

Build file templates: make sure to depend on generated header files

As well as properly generating those that are made from .in files.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Move the Configure generated header files to the top build.info

This turns these headers into build file generated ones.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Configure: Make it possible to generate mandatory header files

'DEPEND[]=file.h' becomes a special way to say that 'file.h' must be
generated before anything else is built.  It's likely that a number
of source files depend on these header files, this provides a simple
way to make sure they are always generated even it the dependency data
hasn't been added to the build file yet.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix omitted selector handling.

The selector field could be omitted because it has a DEFAULT value.
In this case *sfld == NULL (sfld can never be NULL). This was not
noticed because this was never used in existing ASN.1 modules.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update fuzz corpora

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #2949

Initialize the session_id

ssl_session_hash() always looks at the first 4 bytes, regardless of the length.
A client can send a session id that's shorter, and the callback could also
generate one that's shorter.  So we make sure that the rest of the buffer is
initliazed to 0 so that we always calculate the same hash.

Found by tis-interpreter, also previously reported as RT #2871

Reviewed-by: Rich Salz <rsalz@openssl.org>
MR: #2911

Remove an unused variable assignment

Reviewed-by: Rich Salz <rsalz@openssl.org>

RT4562: Fix misleading doc on OPENSSL_config

Also changed the code to use "appname" not "filename"

Reviewed-by: Matt Caswell <matt@openssl.org>

Free memory on an error path

The function a2i_ASN1_STRING can encounter an error after already
allocating a buffer. It wasn't always freeing that buffer on error.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Avoid a double-free in crl2pl7

The variable |crtflst| could get double freed in an error path.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Add missing break statement

The -psk option processing was falling through to the -srp option
processing in the ciphers app.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix comment

Fix a comment following commit c2c49969e23605.

RT2388

Reviewed-by: Rich Salz <rsalz@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Shorten some symbol names

VMS C doesn't allow symbols longer than 31 characters.  We do the
automatic shortening with the library files, but not otherwise (to
make sure to work the VMS C magic).

For consistency, I shortened other similar symbols in the same manner.

Reviewed-by: Rich Salz <rsalz@openssl.org>

GH1141: Different fix, preferred by Richard.

Reviewed-by: Richard Levitte <levitte@openssl.org>

RT3454: Re-enable nistp-64_gcc_128 on windows

Reviewed-by: Andy Polyakov <appro@openssl.org>

Missed some copyright merge

Reviewed-by: Tim Hudson <tjh@openssl.org>

Ensure that NULL r and s parameters cannot be set on DSA_SIG/ECDSA_SIGs.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1193)

Forgot to update the setter argument ordering in the public headers.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1193)

Reorder the setter arguments to more consistently match that of other APIs,
per review comments.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1193)

Implement DSA_SIG_set0() and ECDSA_SIG_set0(), for setting signature values.

SSH2 implementations which use DSA_do_verify() and ECDSA_do_verify() are given
the R and S values, and the data to be signed, by the client.  Thus in order
to validate these signatures, SSH2 implementations will digest and sign
the data -- and then pass in properly provisioned DSA_SIG and ECDSA_SIG objects.

Unfortunately, the existing OpenSSL-1.1.0 APIs do not allow for directly setting
those R and S values in these objects, which makes using OpenSSL for such
SSH2 implementations much more difficult.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Emilia Käsper <emilia@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1193)

Add some missing return value checks

Some misc return value checks

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update sslapitest to use the test framework

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update the SSL_set_session() documentation

Update the SSL_set_session() documentation to reflect the fact that old
bad sessions are removed from the cache if necessary.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add some session API tests

This commit adds some session API tests, and in particular tests the
modified behaviour of SSL_set_session() introduced in the last commit. To
do this I have factored out some common code from the asynciotest into a
new ssltestlib.c file. I've also renamed getsettest to sslapitest as this
more closely matches what it now is!

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ensure SSL_set_session clears the old session from cache if it is bad

SSL_clear() and SSL_free() will remove a session from the cache if it is
considered "bad". However SSL_set_session() does not do this for the session
it is replacing.

SSL_clear() clears an SSL object ready for reuse. It does not clear the
session though. This means that:

  SSL_clear(s)
  SSL_set_session(s, sess);

and
  SSL_set_session(s, sess);
  SSL_clear(s);

do not do the same thing, although logically you would expect that they
would.

The failure of SSL_set_session() to remove bad sessions from the cache
should be considered a bug, so this commit fixes it.

RT#597

Reviewed-by: Rich Salz <rsalz@openssl.org>

SSL test: only write out server2 when testing SNI

The SNI tests introduced a redundant "server2" section into every test
configuration. Copy this automatically from "server" unless testing SNI,
to reduce noise in the generated confs.

Also remove duplicate SSL_TEST_CTX_create (merge conflict error).

Reviewed-by: Rich Salz <rsalz@openssl.org>

Handle inability to create AFALG socket

Some Linux platforms have a suitably recent kernel to support AFALG, but
apparently you still can't actually create an afalg socket. This extends
the afalg_chk_platform() function to additionally check whether we can
create an AFALG socket. We also amend the afalgtest to not report a
failure to load the engine as a test failure. A failure to load is almost
certainly due to platform environmental issues, and not an OpenSSL problem.

RT 4434

Reviewed-by: Andy Polyakov <appro@openssl.org>

Port DTLS version negotiation tests

Reviewed-by: Rich Salz <rsalz@openssl.org>

Clean up following new SNI tests

- Only send SNI in SNI tests. This allows us to test handshakes without
  the SNI extension as well.
- Move all handshake-specific machinery to handshake_helper.c
- Use enum types to represent the enum everywhere
  (Resorting to plain ints can end in sign mismatch when the enum is
  represented by an unsigned type.)

Reviewed-by: Rich Salz <rsalz@openssl.org>

RT3809: basicConstraints is critical

This is really a security bugfix, not enhancement any more.
Everyone knows critical extensions.

Reviewed-by: Dr. Stephen Henson <steve@openssl.org>