sha/asm/keccak1600-mmx.pl: optimize for Atom and add comparison data.

Curiously enough out-of-order Silvermont benefited most from
optimization, 33%. [Originally mentioned "anomaly" turned to be
misreported frequency scaling problem. Correct results were
collected under older kernel.]

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3739)

Add sha/asm/keccak1600-mmx.pl, x86 MMX module.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3739)

Fix a memory leak in the new TAP filter BIO

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3760)

Fix travis clang-3.9 builds

Something environmental changed in travis so that it started preferring
the ubuntu clang-3.9 version instead of the llvm.org one. This breaks the
sanitiser based builds. This change forces travis to de-prioritise the
ubuntu clang packages.

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3759)

Fix another EVP_DigestVerify() instance

Following on from the previous commit this fixes another instance where
we need to treat a -ve return from EVP_DigestVerify() as a bad signature.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3756)

Treat all failures from EVP_DigestVerify() as a bad signature

Prior to 72ceb6a we treated all failures from the call to
EVP_DigestVerifyFinal() as if it were a bad signature, and failures in
EVP_DigestUpdate() as an internal error. After that commit we replaced
this with the one-shot function EVP_DigestVerify() and treated a 0 return
as a bad signature and a negative return as an internal error. However,
some signature errors can be negative (e.g. according to the docs if the
form of the signature is wrong). Therefore we should treat all <=0
returns as a bad signature.

This fixes a boringssl test failure.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3756)

Fix the constant time 64 test

We were adding more tests than we had data for due to use of
sizeof instead of OSSL_NELEM. I also changed the 8 bit tests
for consistency, although they were already working.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3755)

Remove uses of the TEST_check macro.

This macro aborts the test which prevents later tests from executing.  It also
bypasses the test framework output functionality.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3750)

Fix OBJ_create() to tolerate a NULL sn and ln

In 1.0.2 and before OBJ_create() allowed the sn or ln parameter to be NULL.
Commit 52832e47 changed that so that it crashed if they were NULL.

This was causing problems with the built-in config oid module. If a long
name was provided OBJ_create() is initially called with a NULL ln and
therefore causes a crash.

Fixes #3733

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3753)

Fix tls1_generate_master_secret

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3751)

Fix the names of ChaCha20-Poly1305 cipher suites in t1_trce.c.

Per RFC 7905, the cipher suite names end in "_SHA256". The original
implementation targeted the -03 draft, but there was a -04 draft right
before the RFC was published to make the names consistent.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3748)

TAP line filter BIO.

This is an implementation of a BIO filter that produce TAP compatible output
for the test framework.  The current test indentation level is honoured.

The test output functions have been modified to not attempt to indent
their output and to not include the leading '#' character.

The filter is applied to bio_err only.  bio_out is left unchanged, although
tests using bio_out have been modified to use bio_err instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3732)

Configure: give config targets the possibility to enable or disable features

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3745)

Remove duplicate see also reference to BIO_s_mem.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3731)

Add OCSP_resp_get1_id() accessor

Adding a get1 style accessor as brought up in mailing list post
https://mta.openssl.org/pipermail/openssl-users/2016-November/004796.html

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1876)

Avoid compiler complaining

initialize some local variables

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3741)

Add documentation for the SSL_export_keying_material() function

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3735)

sha/asm/sha512p8-ppc.pl: add POWER8 performance data.

[skip ci]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3705)

Add Keccak-1600 modules for PPC64 and POWER8.

[skip ci]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3705)

Fix DTLS failure when used in a build which has SCTP enabled

The value of BIO_CTRL_DGRAM_SET_PEEK_MODE was clashing with the value for
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE. In an SCTP enabled build
BIO_CTRL_DGRAM_SCTP_SET_IN_HANDSHAKE was used unconditionally with
the reasoning that it would be ignored if SCTP wasn't in use. Unfortunately
due to this clash, this wasn't the case. The BIO ended up going into peek
mode and was continually reading the same data over and over - throwing it
away as a replay.

Fixes #3723

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3724)

PSK related tweaks based on review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Use constants rather than macros for the cipher bytes in the apps

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add some tests for the new TLSv1.3 PSK code

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Fix some bugs in the TLSv1.3 PSK code

Found while developing the PSK tests

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Make the input parameters for SSL_SESSION_set1_master_key const

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_set_psk_find_session_callback() and SSL_CTX equivalent

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_set_psk_use_session_callback() and SSL_CTX equivalent

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Tweak the client side PSK callback

Ensure that we properly distinguish between successful return (PSK
provided), successful return (no PSK provided) and failure.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add documentation for SSL_CTX_set_psk_use_session_callback()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_CIPHER_get_handshake_digest()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_SESSION_set_protocol_version()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Document SSL_SESSION_set1_master_key()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add documentation for SSL_SESSION_set_cipher()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Fix no-psk

Broken through previous PSK related commits

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add the ability to set a TLSv1.3 PSK via just the key bytes

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add SSL_SESSION_set_protocol_version()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add SSL_SESSION_set_cipher()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add SSL_SESSION_set1_master_key()

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add the ability to use a server side TLSv1.3 external PSK in s_server

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add the ability to use a client side TLSv1.3 external PSK in s_client

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add a function to get the handshake digest for an SSL_CIPHER

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add public API functions for setting TLSv1.3 PSK callbacks

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add TLSv1.3 client side external PSK support

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add TLSv1.3 server side external PSK support

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3670)

Add ecstress test

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3720)

Add sha/asm/keccak1600-c64x.pl

[skip ci]

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3708)

Add constant-time 64

Standardize comments.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3727)

Use EVP_PKEY_X25519, EVP_PKEY_ED25519 instead of NIDs where appropriate.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Update test config file

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 TLS 1.3 and 1.2 tests

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 EE certificates

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Ed25519 support for mkcert.sh

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Allow Ed25519 in TLS 1.2

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Convert key exchange to one shot call

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Print Ed25519 in s_client/s_server

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 to trace output

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Handle signature algorithms with no associated digest

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 signature algorithm

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add Ed25519 to signature algorithm table

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Add index for ED25519

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Use X509_get_signature_info to get signature strength.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Recognise Ed25519 in X509_certificate_type

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3585)

Merge Nokia copyright notice into standard

This is done with the kind permission of Nokia.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3722)

Reformat progs.pl; add ARIA support

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/3726)

Remove OSSLzu macros and use %zu in the test framework (via BIO_printf).

Convert the debug prints in dtls_mtu_test.c to use the framework.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3730)

Ensure a space after colon in enc -v

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3725)

Add parentheses around macro argument of OSSL_NELEM.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3039)

Modify Sun copyright to follow OpenSSL style

Approved by Oracle.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/3585)

Declare a new x509v3 extension: x509ExtAdmission

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2759)

Fix typo (note by oneton@users.github)

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3716)

Add RAND_UNIMPLEMENTED error code

See old GitHub PR 38.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3714)

Make clear error message if opt_<number> fails

for opt_long(opt_int)/opt_ulong/opt_imax/opt_umax

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3653)

Address style issues.
Refactor count -> c which makes the for loop more readable.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Address double error and OSSLzu comments.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Put error output back.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Update tests to avoid printf to stdout/stderr when running as test cases.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3710)

Remove bsd_cryptodev engine

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3699)

Fix the fall-out in 04-test_bioprint.t

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3712)

Fix the error handling in ERR_get_state:
- Ignoring the return code of ossl_init_thread_start created a memory leak.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3712)

Fix preprocessor indentation.
Rework main() to be in the style of the other conditional tests.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3711)

s_client accepts host/port as positional argument.

This allows the user to provide the target host and optional port to
openssl s_client as an optional positional argument, rather than as the
argument to the -connect flag. This rationalises the user experience of
s_client: given that the only logical purpose of s_client is to connect
to a host, it is difficult to understand why there is an (effectively
mandatory) command option to pass to make that happen.

This patch forbids providing *both* -connect and the positional
argument, because it would likely be too difficult to reconcile.
Otherwise, using the positional argument behaves exactly the same as
using -connect does.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1171)

Remove non-accurate description in Configure script

For DES and 3DES based ciphers are also enabled by this option.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3707)

Fix va_list processing in test_note()

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3704)

Remove a pointless "#if 0" block from BN_mul.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3683)

Reorder Configure output

"Configuring..." was displayed with './Configure LIST'.  This reorders
the display of that line to happen after the "targets" LIST, TABLE and
HASH have been checked.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3702)

Forbid to specify -nextprotoneg if -tls1_3 is enabled

This applies both to s_client and s_server app.

Reaction to Issue #3665.

Signed-off-by: Paul Yang <paulyang.inf@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3697)

Modify type of variable in OPENSSL_cpuid_setup function

CLA: trivial

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3651)

Add output routines to allow consistent formatting of memory, strings
and bignums.  These have been refactored into their own file, along with
their error displays.  The formatting follows the output format used
on error, except that bignums of sixty four bits or less are displayed
in a more compact one line form.

Added a TEST_note function for producing output without file and line
information.

Update the three tests that call BN_print so they use the new test
infrastructure instead.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3655)

Add a missing break in test/shlibloadtest.c

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3661)

Fix the comment about default OPENSSLDIR in windows.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3650)

Tweak the check that a ciphersuite has not changed since the HRR

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)

Add comments to test_ciphersuite_change()

Make it clear that we are pausing one of the connections and then
restarting it again.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)

Fix an uninitialised variable warning

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)

Move ciphersuite selection before session resumption in TLSv1.3

This does things as per the recommendation in the TLSv1.3 spec. It also
means that the server will always choose its preferred ciphersuite.
Previously the server would only select ciphersuites compatible with the
session.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)

Add a test for a server changing the ciphersuite

Test that if a server selects a differenct ciphersuite with the same hash
in TLSv1.3 then this is accepted by the client.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)

Allow the server to change the ciphersuite on resume

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3623)

Add the target 'build_all_generated'

This new target is used to build all generated files and only that.
This can be used to prepare everything that requires things like perl
for a system that lacks perl and then move everything to that system
and do the rest of the build there.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3695)

Fix no-ec

Also remove nested OPENSSL_NO_EC conditional; it was properly indented,
but a no-op.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Benjamin Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/3693)

Add apps/progs.h to gitignore

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3692)

Add sha/asm/keccak1600-armv8.pl.

Reviewed-by: Rich Salz <rsalz@openssl.org>