oweals/u-boot.git
8 years agoaltera_qspi: call callback even if the erase failed
Thomas Chou [Wed, 23 Dec 2015 02:26:03 +0000 (10:26 +0800)]
altera_qspi: call callback even if the erase failed

Erase is an asynchronous operation.  Device drivers are supposed
to call instr->callback() whenever the operation completes, even
if it completes with a failure.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
8 years agoMerge branch 'master' of http://git.denx.de/u-boot-sunxi
Tom Rini [Sun, 27 Dec 2015 14:15:57 +0000 (09:15 -0500)]
Merge branch 'master' of git.denx.de/u-boot-sunxi

8 years agosunxi: Reduce Orangepi PC RAM speed to 624 MHz
Hans de Goede [Wed, 23 Dec 2015 10:48:40 +0000 (11:48 +0100)]
sunxi: Reduce Orangepi PC RAM speed to 624 MHz

There are some reports of stability issues at 672 MHz, see:
http://linux-sunxi.org/Orange_Pi_PC#DRAM_clock_speed_limit

So reduce the DRAM speed to 624MHz which seems to be reliable everywhere.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
8 years agoMerge git://git.denx.de/u-boot-socfpga
Tom Rini [Thu, 24 Dec 2015 14:31:35 +0000 (09:31 -0500)]
Merge git://git.denx.de/u-boot-socfpga

Conflicts:
include/configs/axs101.h

Signed-off-by: Tom Rini <trini@konsulko.com>
8 years agoarm: socfpga: Fix i2c mux on cyclone5-socdk board
Chin Liang See [Wed, 23 Dec 2015 14:07:49 +0000 (22:07 +0800)]
arm: socfpga: Fix i2c mux on cyclone5-socdk board

Updated pinmux group GENERALIO[15-16] for i2c.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: shengjiangwu <shengjiangwu@icloud.com>
8 years agoarm: socfpga: Fix USB doesn't work on socdk board
shengjiangwu [Wed, 23 Dec 2015 02:37:31 +0000 (10:37 +0800)]
arm: socfpga: Fix USB doesn't work on socdk board

Updated pinmux group EMACIO[1-8] and EMACIO[10-13] for USB.

Signed-off-by: shengjiangwu <shengjiangwu@icloud.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: Add support for Denali NAND controller
Marek Vasut [Sun, 20 Dec 2015 03:00:46 +0000 (04:00 +0100)]
arm: socfpga: Add support for Denali NAND controller

Add common configuration bits for the Denali NAND controller and also
support for using it as a boot device in SPL.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
8 years agoarm: socfpga: Enable DFU MMC support only if DM_MMC is enabled
Marek Vasut [Sun, 20 Dec 2015 03:00:45 +0000 (04:00 +0100)]
arm: socfpga: Enable DFU MMC support only if DM_MMC is enabled

It is not possible to compile DFU MMC support if the MMC support is not
compiled into U-Boot. Secure the code with an ifdef to prevent compiler
splat.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
8 years agoarm: socfpga: Enable SPL MMC/SPI support only if DM_MMC/SPI is enabled
Marek Vasut [Sun, 20 Dec 2015 03:00:44 +0000 (04:00 +0100)]
arm: socfpga: Enable SPL MMC/SPI support only if DM_MMC/SPI is enabled

It is not possible to compile MMC/SPI SPL if the respective DM_MMC/DM_SPI
bits are not enabled. Secure the code with an ifdef to prevent compiler
splat.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
8 years agoarm: socfpga: Unreset NAND in U-Boot
Marek Vasut [Sun, 20 Dec 2015 03:00:43 +0000 (04:00 +0100)]
arm: socfpga: Unreset NAND in U-Boot

Make sure the NAND reset is not asserted in full U-Boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
8 years agoarm: socfpga: Unreset NAND in SPL
Marek Vasut [Sun, 20 Dec 2015 03:00:42 +0000 (04:00 +0100)]
arm: socfpga: Unreset NAND in SPL

If the system boots from NAND, make sure to de-assert the NAND IP
reset, otherwise the system will get stuck.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Define NAND reset bit
Marek Vasut [Sun, 20 Dec 2015 03:00:41 +0000 (04:00 +0100)]
arm: socfpga: Define NAND reset bit

Define the NAND reset bit and fix the ordering of the macros.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Fix QSPI doesn't work on socdk board
shengjiangwu [Tue, 22 Dec 2015 09:18:09 +0000 (17:18 +0800)]
arm: socfpga: Fix QSPI doesn't work on socdk board

Updated pinmux group MIXED1IO[15-20] for QSPI.
Updated QSPI clock.

Signed-off-by: shengjiangwu <shengjiangwu@icloud.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: Fix emac1 doesn't work on socdk board
shengjiangwu [Tue, 22 Dec 2015 07:22:02 +0000 (15:22 +0800)]
arm: socfpga: Fix emac1 doesn't work on socdk board

Updated pinmux group MIXED1IO[0-13] for RGMII1.
Updated EMAC1 clock.

Signed-off-by: shengjiangwu <shengjiangwu@icloud.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sr1500: Update qspiboot to use UBIFS
Chin Liang See [Tue, 22 Dec 2015 07:32:42 +0000 (15:32 +0800)]
arm: socfpga: sr1500: Update qspiboot to use UBIFS

Update the qspiboot console command to use UBIFS instead
of old jffs2 file system.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sockit: Update qspiboot to use UBIFS
Chin Liang See [Tue, 22 Dec 2015 07:32:41 +0000 (15:32 +0800)]
arm: socfpga: sockit: Update qspiboot to use UBIFS

Update the qspiboot console command to use UBIFS instead
of old jffs2 file system.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: arria5_socdk: Update qspiboot to use UBIFS
Chin Liang See [Tue, 22 Dec 2015 07:32:40 +0000 (15:32 +0800)]
arm: socfpga: arria5_socdk: Update qspiboot to use UBIFS

Update the qspiboot console command to use UBIFS instead
of old jffs2 file system.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: cyclone5_socdk: Update qspiboot to use UBIFS
Chin Liang See [Tue, 22 Dec 2015 07:32:39 +0000 (15:32 +0800)]
arm: socfpga: cyclone5_socdk: Update qspiboot to use UBIFS

Update the qspiboot console command to use UBIFS instead
of old jffs2 file system.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sr1500: Enable qspiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:38 +0000 (15:32 +0800)]
arm: socfpga: sr1500: Enable qspiload console command

Enabling qspiload command which will load the kernel
image and dtb from UBIFS within MTD partition labeled
UBI.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sockit: Enable qspiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:37 +0000 (15:32 +0800)]
arm: socfpga: sockit: Enable qspiload console command

Enabling qspiload command which will load the kernel
image and dtb from UBIFS within MTD partition labeled
UBI.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: arria5_socdk: Enable qspiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:36 +0000 (15:32 +0800)]
arm: socfpga: arria5_socdk: Enable qspiload console command

Enabling qspiload command which will load the kernel
image and dtb from UBIFS within MTD partition labeled
UBI.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: cyclone5_socdk: Enable qspiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:35 +0000 (15:32 +0800)]
arm: socfpga: cyclone5_socdk: Enable qspiload console command

Enabling qspiload command which will load the kernel
image and dtb from UBIFS within MTD partition labeled
UBI.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sr1500: Enable ubiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:34 +0000 (15:32 +0800)]
arm: socfpga: sr1500: Enable ubiload console command

Enabling ubiload command to load kernel image and
device tree from mtd part labeled "UBI". ubiload
command will search the file from directory /boot.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sockit: Enable ubiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:33 +0000 (15:32 +0800)]
arm: socfpga: sockit: Enable ubiload console command

Enabling ubiload command to load kernel image and
device tree from mtd part labeled "UBI". ubiload
command will search the file from directory /boot.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: arria5_socdk: Enable ubiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:32 +0000 (15:32 +0800)]
arm: socfpga: arria5_socdk: Enable ubiload console command

Enabling ubiload command to load kernel image and
device tree from mtd part labeled "UBI". ubiload
command will search the file from directory /boot.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: cyclone5_socdk: Enable ubiload console command
Chin Liang See [Tue, 22 Dec 2015 07:32:31 +0000 (15:32 +0800)]
arm: socfpga: cyclone5_socdk: Enable ubiload console command

Enabling ubiload command to load kernel image and
device tree from mtd part labeled "UBI". ubiload
command will search the file from directory /boot.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sr1500: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Chin Liang See [Tue, 22 Dec 2015 07:32:30 +0000 (15:32 +0800)]
arm: socfpga: sr1500: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS

Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS for UBI
and UBIFS support on serial NOR flash

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: arria5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Chin Liang See [Tue, 22 Dec 2015 07:32:28 +0000 (15:32 +0800)]
arm: socfpga: arria5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS

Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS for UBI
and UBIFS support on serial NOR flash

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS
Chin Liang See [Tue, 22 Dec 2015 07:32:27 +0000 (15:32 +0800)]
arm: socfpga: cyclone5: Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS

Undefine CONFIG_SPI_FLASH_USE_4K_SECTORS for UBI
and UBIFS support on serial NOR flash

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: Enable ubi and ubifs support
Chin Liang See [Tue, 22 Dec 2015 07:32:26 +0000 (15:32 +0800)]
arm: socfpga: Enable ubi and ubifs support

When QSPI and NAND is enabled, the ubi and ubifs support
will be enabled too.

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoARM: dts: uniphier: add SD/MMC pinmux nodes
Masahiro Yamada [Mon, 21 Dec 2015 02:14:22 +0000 (11:14 +0900)]
ARM: dts: uniphier: add SD/MMC pinmux nodes

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: allow to run zImage rather than uImage
Masahiro Yamada [Fri, 18 Dec 2015 05:52:32 +0000 (14:52 +0900)]
ARM: uniphier: allow to run zImage rather than uImage

UniPhier SoC family adopt ARM Multi-platform in Linux since the first
upstreaming.  Because CONFIG_ARM_PATCH_PHYS_VIRT is defined, the
kernel image is completely position-independent.  There is no reason
to decide the load address on compile time, but it is up to the boot
loader.  Now, zImage is handier than uImage, also it allows to skip
the relocation of the kernel image.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: rename rest of defconfig files
Masahiro Yamada [Thu, 17 Dec 2015 09:00:41 +0000 (18:00 +0900)]
ARM: uniphier: rename rest of defconfig files

Rename rest of defconfig files of UniPhier SoC family to have the
prefix uniphier_.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig
Masahiro Yamada [Thu, 17 Dec 2015 09:00:40 +0000 (18:00 +0900)]
ARM: uniphier: support ProXstream2, PH1-LD6b boards in single defconfig

These boards are similar enough to be supported in a single defconfig
file.  Distinguish one from another by "DEVICE_TREE" from the command
line.  The how-to-build in doc/README.uniphier should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: merge ph1_ld4_defconfig and ph1_sld8_defconfig
Masahiro Yamada [Thu, 17 Dec 2015 09:00:39 +0000 (18:00 +0900)]
ARM: uniphier: merge ph1_ld4_defconfig and ph1_sld8_defconfig

These two are similar enough to be merged into a single
defconfig file.  Distinguish one from another by "DEVICE_TREE"
from the command line.  The how-to-build in doc/README.uniphier
should be also updated.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: drop fdt_file from CONFIG_EXTRA_ENV_SETTINGS
Masahiro Yamada [Thu, 17 Dec 2015 09:00:38 +0000 (18:00 +0900)]
ARM: uniphier: drop fdt_file from CONFIG_EXTRA_ENV_SETTINGS

Now this environment is run-time set to the DTB name U-Boot is really
running with.  Drop the static define.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: set DTB file name to fdt_file environment
Masahiro Yamada [Thu, 17 Dec 2015 09:00:37 +0000 (18:00 +0900)]
ARM: uniphier: set DTB file name to fdt_file environment

When we want to boot Linux with a DTB file downloaded from a TFTP
server or somewhere, we need to know the file name to be downloaded.

Assume the U-Boot configuration is shared among some similar boards.
If they are similar enough, the difference only appears in device
trees.  The build procedure would be like this:

 - Board A:  make foo_common_defconfig && make DEVICE_TREE=foo_board_a
 - Board B:  make foo_common_defconfig && make DEVICE_TREE=foo_board_b
 - Board C:  make foo_common_defconfig && make DEVICE_TREE=foo_board_c

In this case, the U-Boot image contains nothing about the DTB file name
it is running with.  (CONFIG_DEFAULT_DEVICE_TREE is not helpful for this
purpose because it is painful to change it from "make menuconfig" for
each board.)

This commit allows to lookup the DTB file name based on the compatible
string and set it to "fdt_file" environment.  Then "tftpboot $fdt_file"
will download the file we want.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: merge umc/ and ddrphy/ into a single directory
Masahiro Yamada [Thu, 17 Dec 2015 08:47:47 +0000 (17:47 +0900)]
ARM: uniphier: merge umc/ and ddrphy/ into a single directory

The UMC (Universal Memory Controller) and the DDR PHY block are
highly related to each other.  It is better to have both code in the
same directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: display model number all the time on boot up
Masahiro Yamada [Thu, 17 Dec 2015 08:47:46 +0000 (17:47 +0900)]
ARM: uniphier: display model number all the time on boot up

Both "Model 1" and "Model 2" are supported for ProXstream2 and
PH1-LD6b boards.  It is useful to show the model number in the
boot banner.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: add macros and revision IDs for sLD11 and LD10
Masahiro Yamada [Thu, 17 Dec 2015 08:47:45 +0000 (17:47 +0900)]
ARM: uniphier: add macros and revision IDs for sLD11 and LD10

These are new SoCs from Socionext Inc.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: compile uniphier_get_board_param() for U-Boot proper
Masahiro Yamada [Thu, 17 Dec 2015 08:47:44 +0000 (17:47 +0900)]
ARM: uniphier: compile uniphier_get_board_param() for U-Boot proper

Compile this file for U-Boot proper as well as SPL, so that the
U-Boot proper can call uniphier_get_board_param().

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: split ProXstream2 board data and change DDR frequency
Masahiro Yamada [Thu, 17 Dec 2015 08:47:43 +0000 (17:47 +0900)]
ARM: uniphier: split ProXstream2 board data and change DDR frequency

The DDR3 memory chips on ProXstream2 boards support up to 2133 MHz,
while only up to 1866MHz on PH1-LD6b boards.

Split the board data structure and change the DDR frequency of
ProXstream2 boards to 2133 MHz.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: call uniphier_get_board_param() without FDT blob
Masahiro Yamada [Thu, 17 Dec 2015 08:47:42 +0000 (17:47 +0900)]
ARM: uniphier: call uniphier_get_board_param() without FDT blob

Move "gd->fdt_blob" from the caller to the callee so that this
function can be used more easily.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: add functions to get SoC model/revision
Masahiro Yamada [Thu, 17 Dec 2015 08:47:41 +0000 (17:47 +0900)]
ARM: uniphier: add functions to get SoC model/revision

We sometimes have to implement different code depending on the SoC
revision.  This commit adds functions to get the model/revision
number.

Note:
  Model number: incremented on major changes of the SoC
  Revision number: incremented on minor changes of the SoC

The "Model 2" exists for PH1-sLD3, ProXstream2/PH1-LD6b.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: dts: uniphier: use stdout-path instead of console
Masahiro Yamada [Thu, 17 Dec 2015 06:05:01 +0000 (15:05 +0900)]
ARM: dts: uniphier: use stdout-path instead of console

Sync device trees with Linux.

Linux commit: 06ff6b2d63210922a1b1d0f4997e29ce75b5e0c0

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: dts: uniphier: add outer cache nodes
Masahiro Yamada [Wed, 16 Dec 2015 01:54:08 +0000 (10:54 +0900)]
ARM: dts: uniphier: add outer cache nodes

These nodes are not parsed by U-Boot for now, but syncing device trees
with Linux is helpful for easier diffing.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi
Masahiro Yamada [Wed, 16 Dec 2015 01:54:07 +0000 (10:54 +0900)]
ARM: dts: uniphier: factor out common nodes to uniphier-common32.dtsi

UniPhier SoCs (except PH1-sLD3) have several nodes in common.
Factor out them into uniphier-common32.dtsi.  This improves the code
maintainability.

PH1-sLD3 is so old that it has more or less different register maps
than the others.  So, it cannot be included in this refactoring.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: allow DDR function to return more precise error code
Masahiro Yamada [Wed, 16 Dec 2015 01:50:26 +0000 (10:50 +0900)]
ARM: uniphier: allow DDR function to return more precise error code

Return different error code depending on the reason so that the
caller can know the cause of the failure.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: use BIT() macro for DDR PHY header
Masahiro Yamada [Wed, 16 Dec 2015 01:44:28 +0000 (10:44 +0900)]
ARM: uniphier: use BIT() macro for DDR PHY header

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: rename DTCR_RNKEN_* register bit to DTCR_RANKEN_*
Masahiro Yamada [Wed, 16 Dec 2015 01:42:29 +0000 (10:42 +0900)]
ARM: uniphier: rename DTCR_RNKEN_* register bit to DTCR_RANKEN_*

The bit 27-24 of the DTCR register is described as RANKEN in the
DDR PHY databook.  Follow this abbreviation.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: add const qualifier to constant array
Masahiro Yamada [Wed, 16 Dec 2015 01:36:13 +0000 (10:36 +0900)]
ARM: uniphier: add const qualifier to constant array

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoARM: uniphier: add static qualifiers to locally used functions
Masahiro Yamada [Fri, 11 Dec 2015 08:17:53 +0000 (17:17 +0900)]
ARM: uniphier: add static qualifiers to locally used functions

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
8 years agoarm: socfpga: Enable simple bus in SPL on all boards
Marek Vasut [Tue, 22 Dec 2015 03:16:01 +0000 (04:16 +0100)]
arm: socfpga: Enable simple bus in SPL on all boards

The simple bus support must be enabled in SPL, otherwise the boards
will not be able to parse the DT and will fail to boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Make /soc available in pre-reloc
Marek Vasut [Tue, 22 Dec 2015 03:15:21 +0000 (04:15 +0100)]
arm: socfpga: Make /soc available in pre-reloc

This node must be available before relocation, otherwise the board
will not find mmc and will thus not boot.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Enabling MTD default partitions
Chin Liang See [Mon, 21 Dec 2015 15:01:51 +0000 (23:01 +0800)]
arm: socfpga: Enabling MTD default partitions

Enabling MTD default partitions if its not defined in board
configuration file. The layout as below
 device nor0 <ff705000.spi.0>, # parts = 6
 #: name                size            offset          mask_flags
 0: u-boot              0x00100000      0x00000000      0
 1: env1                0x00040000      0x00100000      0
 2: env2                0x00040000      0x00140000      0
 3: UBI                 0x03e80000      0x00180000      0
 4: boot                0x00e80000      0x00180000      0
 5: rootfs              0x01000000      0x01000000      0

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: socrates: Consolidate SDMMC environment
Chin Liang See [Mon, 21 Dec 2015 13:02:51 +0000 (21:02 +0800)]
arm: socfpga: socrates: Consolidate SDMMC environment

Remove the duplication of SDMMC environment configuration
from each boards' configuration header file into
socfpga_common.h

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: sockit: Consolidate SDMMC environment
Chin Liang See [Mon, 21 Dec 2015 13:02:50 +0000 (21:02 +0800)]
arm: socfpga: sockit: Consolidate SDMMC environment

Remove the duplication of SDMMC environment configuration
from each boards' configuration header file into
socfpga_common.h

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: mcvevk: Consolidate SDMMC environment
Chin Liang See [Mon, 21 Dec 2015 13:02:49 +0000 (21:02 +0800)]
arm: socfpga: mcvevk: Consolidate SDMMC environment

Remove the duplication of SDMMC environment configuration
from each boards' configuration header file into
socfpga_common.h

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: de0_nano_soc: Consolidate SDMMC environment
Chin Liang See [Mon, 21 Dec 2015 13:02:48 +0000 (21:02 +0800)]
arm: socfpga: de0_nano_soc: Consolidate SDMMC environment

Remove the duplication of SDMMC environment configuration
from each boards' configuration header file into
socfpga_common.h

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: arria5_socdk: Consolidate SDMMC environment
Chin Liang See [Mon, 21 Dec 2015 13:02:47 +0000 (21:02 +0800)]
arm: socfpga: arria5_socdk: Consolidate SDMMC environment

Remove the duplication of SDMMC environment configuration
from each boards' configuration header file into
socfpga_common.h

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: cyclone5_socdk: Consolidate SDMMC environment
Chin Liang See [Mon, 21 Dec 2015 13:02:46 +0000 (21:02 +0800)]
arm: socfpga: cyclone5_socdk: Consolidate SDMMC environment

Remove the duplication of SDMMC environment configuration
from each boards' configuration header file into
socfpga_common.h

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agoarm: socfpga: Consolidate SDMMC environment
Chin Liang See [Mon, 21 Dec 2015 13:02:45 +0000 (21:02 +0800)]
arm: socfpga: Consolidate SDMMC environment

Remove the duplication of SDMMC environment configuration
from each boards' configuration header file into
socfpga_common.h

Signed-off-by: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Dinh Nguyen <dinh.linux@gmail.com>
Cc: Pavel Machek <pavel@denx.de>
Cc: Marek Vasut <marex@denx.de>
Cc: Stefan Roese <sr@denx.de>
8 years agonet: designware: Zap trailing backslash
Marek Vasut [Sun, 20 Dec 2015 02:59:23 +0000 (03:59 +0100)]
net: designware: Zap trailing backslash

Trailing backslashes are necessary only in macros, not in the actual
code, so remove them.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
8 years agonet: designware: Zap CONFIG_DW_AUTONEG
Marek Vasut [Sun, 20 Dec 2015 02:59:41 +0000 (03:59 +0100)]
net: designware: Zap CONFIG_DW_AUTONEG

This symbol is not used anywhere, so remove it. For spear600, remove
it from the board file, since the symbol is not defined for spear600
either.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Joe Hershberger <joe.hershberger@ni.com>
8 years agonet: eth_designware: select PHYLIB in Kconfig
Thomas Chou [Mon, 7 Dec 2015 12:53:29 +0000 (20:53 +0800)]
net: eth_designware: select PHYLIB in Kconfig

Select PHYLIB in drivers/net/Kconfig. And remove CONFIG_PHYLIB
from legacy board header files.

This fixed the warnings when both ALTERA_TSE and ETH_DESIGNWARE
are selected.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reported-by: Pavel Machek <pavel@denx.de>
Acked-by: Chin Liang See <clsee@altera.com>
Acked-by: Pavel Machek <pavel@denx.de>
Tested-by: Pavel Machek <pavel@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
8 years agoarm: socfpga: Actually enable L2 cache
Marek Vasut [Sun, 20 Dec 2015 03:00:09 +0000 (04:00 +0100)]
arm: socfpga: Actually enable L2 cache

The L2 cache was never enabled in the v7_outer_cache_enable(), fix
this and enable the L2 cache.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Chin Liang See <clsee@altera.com>
8 years agoPrepare v2016.01-rc3 v2016.01-rc3
Tom Rini [Tue, 22 Dec 2015 02:07:04 +0000 (21:07 -0500)]
Prepare v2016.01-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>
8 years agoMerge git://git.denx.de/u-boot-arc
Tom Rini [Mon, 21 Dec 2015 23:25:10 +0000 (18:25 -0500)]
Merge git://git.denx.de/u-boot-arc

8 years agoaxs103: add support of generic OHCI USB 1.1 controller
Alexey Brodkin [Thu, 10 Dec 2015 13:56:42 +0000 (16:56 +0300)]
axs103: add support of generic OHCI USB 1.1 controller

This commit adds support of USB 1.1 storage media on AXS103 board.
For some yet unknown reason USB 2.0 doesn't work on AXS103 board issuing
messages like this:
------------------------>8-------------------
AXS# usb start
starting USB...
USB0:   USB EHCI 1.00
scanning bus 0 for devices... EHCI timed out on TD - token=0x80008c80
unable to get device descriptor (error=-1)
1 USB Device(s) found
------------------------>8-------------------

As a work-around we're falling back to USB 1.1.
Indeed it is much slower but at least USB storage devices are usable on
AXS103.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
8 years agosunxi: Add CONFIG_SUNXI_NO_PMIC to Marsboard A10 config
Aleksei Mamlin [Sun, 20 Dec 2015 21:45:13 +0000 (00:45 +0300)]
sunxi: Add CONFIG_SUNXI_NO_PMIC to Marsboard A10 config

Marsboard A10 haven't any PMIC at all, so add CONFIG_SUNXI_NO_PMIC=y to
Marsboard_A10_defconfig

Signed-off-by: Aleksei Mamlin <mamlinav@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
8 years agosunxi: Select DM_KEYBOARD
Hans de Goede [Mon, 21 Dec 2015 19:22:00 +0000 (20:22 +0100)]
sunxi: Select DM_KEYBOARD

We need to select DM_KEYBOARD now that the usb-kbd code has been converted
to this, otherwise usb keyboards do not work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
8 years agosunxi: Enable a second mmc socket as boot target in the environment
Karsten Merker [Wed, 16 Dec 2015 19:59:40 +0000 (20:59 +0100)]
sunxi: Enable a second mmc socket as boot target in the environment

Some sunxi-based boards (such as the Olimex A20-SOM-EVB) have a
second MMC socket. This socket is not bootable hardware-wise,
i.e. u-boot itself cannot be loaded from it, but once u-boot has
started, the second socket can be used in the boot process
provided by config_distro_bootcmd.h.

If a second MMC socket is present, place it in the boot order
after the first MMC socket.

Signed-off-by: Karsten Merker <merker@debian.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
8 years agosunxi: A20-Olimex-SOM-EVB defconfig: enable mmc3
Karsten Merker [Wed, 16 Dec 2015 19:59:39 +0000 (20:59 +0100)]
sunxi: A20-Olimex-SOM-EVB defconfig: enable mmc3

The Olimex A20-SOM-EVB is an evaluation board for the Olimex
A20-SOM system-on-module. The baseboard provides a full-size SD
socket (connected to mmc3) in addition to the micro-SD socket on
the SOM itself (which is connected to mmc0).

Enable the mmc3 controller in the board defconfig.

Signed-off-by: Karsten Merker <merker@debian.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
8 years agosun5i: Add defconfig and dts file for the Empire Electronix D709 tablet
Hans de Goede [Sun, 20 Dec 2015 11:30:18 +0000 (12:30 +0100)]
sun5i: Add defconfig and dts file for the Empire Electronix D709 tablet

The Empire Electronix D709 tablet is a fairly standard 7" A13 tablet,
featuring usb-wifi, a micro-sd slot, micro-usb otg and headphone jack.

Empire Electronix is written on the back of the tablet, the D709 model
info can be found in the about tablet menu in android.

The PCB has no markings to speak of.

This dts file is identical to the one submitted to the upstream kernel.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
8 years agox86: Remove Graeme Russ from the git alias file
Simon Glass [Sat, 19 Dec 2015 22:44:04 +0000 (15:44 -0700)]
x86: Remove Graeme Russ from the git alias file

As requested, remove Graeme's email address.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
8 years agoMerge branch 'master' of git://www.denx.de/git/u-boot-socfpga
Tom Rini [Sun, 20 Dec 2015 03:05:31 +0000 (22:05 -0500)]
Merge branch 'master' of git://denx.de/git/u-boot-socfpga

8 years agoarm: socfpga: fix trivial header preprocessor for socfpga_common.h
Dinh Nguyen [Thu, 3 Dec 2015 22:05:59 +0000 (16:05 -0600)]
arm: socfpga: fix trivial header preprocessor for socfpga_common.h

Replace__CONFIG_SOCFPGA_CYCLONE5_COMMON_H__ with
__CONFIG_SOCFPGA_COMMON_H__ as the file is now called socfpga_common.h

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: fix up a questionable macro for SDMMC
Dinh Nguyen [Wed, 2 Dec 2015 19:31:33 +0000 (13:31 -0600)]
arm: socfpga: fix up a questionable macro for SDMMC

Move the macro into the socfpga_dwmci_clksel().

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Signed-off-by: Marek Vasut <marex@denx.de>
[fix parenthesis in the sdmmc_mask]

8 years agoarm: socfpga: remove building scan manager
Dinh Nguyen [Wed, 2 Dec 2015 19:31:32 +0000 (13:31 -0600)]
arm: socfpga: remove building scan manager

The scan manager is not needed for the Arria10. Edit the makefile to
build the scan manager for arria5 and cyclone5 only.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Marek Vasut <marex@denx.de>
8 years agoarm: socfpga: introduce TARGET_SOCFPGA_GEN5 config property
Dinh Nguyen [Wed, 2 Dec 2015 19:31:25 +0000 (13:31 -0600)]
arm: socfpga: introduce TARGET_SOCFPGA_GEN5 config property

In order to re-use as much Cyclone5 and Arria5 code as possible to support
the Arria10 platform, we need to wrap some of the code with #ifdef's. By
adding CONFIG_TARGET_SOCFPGA_GEN5, we can shorten the check by not having to check
for both AV || AV.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: remove note to add CONFIG_USB_DWC2_REG_ADDR
Dinh Nguyen [Mon, 7 Dec 2015 22:48:04 +0000 (16:48 -0600)]
arm: socfpga: remove note to add CONFIG_USB_DWC2_REG_ADDR

Now that the USB DWC2 probing is done from OF, remove this note to add
CONFIG_USB_DWC2_REG_ADDR.

Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Drop the board boilerplate
Marek Vasut [Sat, 5 Dec 2015 20:10:44 +0000 (21:10 +0100)]
arm: socfpga: Drop the board boilerplate

Drop all the common board code, since it is not completely useless.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Introduce common board code
Marek Vasut [Sat, 5 Dec 2015 20:07:23 +0000 (21:07 +0100)]
arm: socfpga: Introduce common board code

The SoCFPGA has reached a point where every single board code become
the same, since each and every single board is probed equally from OF.
Move the common board code into arch/arm/mach-socfpga/ .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Switch CONFIG_HOSTNAME to CONFIG_SYS_BOARD
Marek Vasut [Sat, 5 Dec 2015 19:08:21 +0000 (20:08 +0100)]
arm: socfpga: Switch CONFIG_HOSTNAME to CONFIG_SYS_BOARD

We already have the CONFIG_SYS_BOARD variable, which defines the name
of the board. The value in CONFIG_HOSTNAME is exactly the same and is
thus just a duplicity, so switch it to reuse CONFIG_SYS_BOARD .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: Switch CONFIG_G_DNL_MANUFACTURER to CONFIG_SYS_VENDOR
Marek Vasut [Sat, 5 Dec 2015 19:05:46 +0000 (20:05 +0100)]
arm: socfpga: Switch CONFIG_G_DNL_MANUFACTURER to CONFIG_SYS_VENDOR

We already have the CONFIG_SYS_VENDOR variable, which defines the
manufacturer of the board. The value in CONFIG_G_DNL_MANUFACTURER
is just a duplicity, so switch it to reuse CONFIG_SYS_VENDOR .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: sockit: Zap VIRTUAL_TARGET
Marek Vasut [Sat, 5 Dec 2015 19:01:40 +0000 (20:01 +0100)]
arm: socfpga: sockit: Zap VIRTUAL_TARGET

There is no VT for this board, so remove this incorrect macro.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: de0_nano: Zap VIRTUAL_TARGET
Marek Vasut [Sat, 5 Dec 2015 19:00:52 +0000 (20:00 +0100)]
arm: socfpga: de0_nano: Zap VIRTUAL_TARGET

There is no VT for this board, so remove this incorrect macro.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded data
Marek Vasut [Sat, 5 Dec 2015 18:24:22 +0000 (19:24 +0100)]
arm: socfpga: socrates: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
8 years agoarm: socfpga: sockit: Probe DWC2 UDC from OF instead of hard-coded data
Marek Vasut [Sat, 5 Dec 2015 18:24:22 +0000 (19:24 +0100)]
arm: socfpga: sockit: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
8 years agoarm: socfpga: mcvevk: Probe DWC2 UDC from OF instead of hard-coded data
Marek Vasut [Sat, 5 Dec 2015 18:24:22 +0000 (19:24 +0100)]
arm: socfpga: mcvevk: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
8 years agoarm: socfpga: de0_nano: Probe DWC2 UDC from OF instead of hard-coded data
Marek Vasut [Sat, 5 Dec 2015 18:24:22 +0000 (19:24 +0100)]
arm: socfpga: de0_nano: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
8 years agoarm: socfpga: cyclone5-socdk: Probe DWC2 UDC from OF instead of hard-coded data
Marek Vasut [Sat, 5 Dec 2015 18:24:22 +0000 (19:24 +0100)]
arm: socfpga: cyclone5-socdk: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
8 years agoarm: socfpga: arria5-socdk: Probe DWC2 UDC from OF instead of hard-coded data
Marek Vasut [Sat, 5 Dec 2015 18:24:22 +0000 (19:24 +0100)]
arm: socfpga: arria5-socdk: Probe DWC2 UDC from OF instead of hard-coded data

This patch adds the necessary OF alias for the UDC node, which let's
the code locate the DWC2 UDC base address in OF instead of hard-coding
it into the U-Boot binary. The code is adjusted to use the address from
OF instead of the hard-coded one. Finally, the hard-coded address is
removed and USB DM support is enabled.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
8 years agoarm: socfpga: Allow DWC2 UDC probing from OF
Marek Vasut [Sat, 5 Dec 2015 18:28:44 +0000 (19:28 +0100)]
arm: socfpga: Allow DWC2 UDC probing from OF

The USB gadget framework does not support DM yet, so add this bit
to let DWC2 UDC probe from OF on platforms which support it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
Cc: Lukasz Majewski <l.majewski@majess.pl>
Cc: Lukasz Majewski <l.majewski@samsung.com>
8 years agoarm: socfpga: socrates: Remove Micrel PHY configuration
Marek Vasut [Sat, 5 Dec 2015 16:55:36 +0000 (17:55 +0100)]
arm: socfpga: socrates: Remove Micrel PHY configuration

The Micrel PHY configuration is now done from OF, so hard-coding
the configuration into the board file is no longer necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: sockit: Remove Micrel PHY configuration
Marek Vasut [Sat, 5 Dec 2015 16:55:54 +0000 (17:55 +0100)]
arm: socfpga: sockit: Remove Micrel PHY configuration

The Micrel PHY configuration is now done from OF, so hard-coding
the configuration into the board file is no longer necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: de0_nano: Remove Micrel PHY configuration
Marek Vasut [Sat, 5 Dec 2015 18:00:00 +0000 (19:00 +0100)]
arm: socfpga: de0_nano: Remove Micrel PHY configuration

The Micrel PHY configuration is now done from OF, so hard-coding
the configuration into the board file is no longer necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: cyclone5-socdk: Remove Micrel PHY configuration
Marek Vasut [Sat, 5 Dec 2015 16:55:19 +0000 (17:55 +0100)]
arm: socfpga: cyclone5-socdk: Remove Micrel PHY configuration

The Micrel PHY configuration is now done from OF, so hard-coding
the configuration into the board file is no longer necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: arria5-socdk: Remove Micrel PHY configuration
Marek Vasut [Sat, 5 Dec 2015 16:54:35 +0000 (17:54 +0100)]
arm: socfpga: arria5-socdk: Remove Micrel PHY configuration

The Micrel PHY configuration is now done from OF, so hard-coding
the configuration into the board file is no longer necessary.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>
8 years agoarm: socfpga: socrates: Add missing PHY skew config
Marek Vasut [Sat, 5 Dec 2015 16:53:40 +0000 (17:53 +0100)]
arm: socfpga: socrates: Add missing PHY skew config

Add missing KSZ9021 PHY skew configuration for the EBV socrates board.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Joe Hershberger <joe.hershberger@ni.com>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@opensource.altera.com>