crypto/cryptlib.c: resolve possible race in OPENSSL_isservice.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)

crypto/cryptlib.c: make OPENSS_cpuid_setup safe to use as constructor.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6752)

INSTALL,NOTES.WIN: classify no-asm as non-production option.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6773)

ec/ecp_nistz256.c: fix Coverity nit.

|ctx| recently became unconditionally non-NULL and is already dereferenced
earlier.

Reviewed-by: Rich Salz <rsalz@openssl.org>

apps/dsaparam.c: make dsaparam -C output strict-warnings-friendly.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Configure death handler: instead of printing directly, amend the message

This is done by calling die again, just make sure to reset the __DIE__
handler first.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)

Configure death handler: remember to call original death handler

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)

Configure death handler: bail out early when run in eval block

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)

Remove zero special-case in BN_mod_exp_mont.

A number intended to treat the base as secret should not be branching on
whether it is zero. Test-wise, this is covered by existing tests in bnmod.txt.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6733)

Configure: print generic advice when dying

On the same note, change the 'NASM not found' message to give specific
advice on how to handle the failure.

Fixes #6765

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6771)

Update sm2_crypt.c

asn1_encode : x, y  =>    0 | x，0 | y
(because of DER encoding rules when x and y have high bit set)

CLA: Trivial

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6694)

def_load_bio(): Free |biosk| more carefully

If there's anything in the |biosk| stack, the first element is always
the input BIO.  It should never be freed in this function, so we must
take careful steps not to do so inadvertently when freeing the stack.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6769)

.travis.yml: omit linux-ppc64le target.

Build jobs keep timing out initializing...

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>

Make sure the 'tsget' script is called 'tsget.pl' everywhere

The result is that we don't have to produce different names on
different platforms, and we won't have confusion on Windows depending
on if the script was built with mingw or with MSVC.

Partial fix for #3254

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6764)

Add a note about aborts encountered while sending early_data

In some circumstances it is possible for a client to have a session
reporting a max early data value that is greater than the server will
support. In such cases the client could encounter an aborted connection.

Fixes #6735

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6740)

ec/ecp_nistz256.c: fix ecp_nistz256_set_from_affine.

ecp_nistz256_set_from_affine is called when application attempts to use
custom generator, i.e. rarely. Even though it was wrong, it didn't
affect point operations, they were just not as fast as expected.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)

ec/asm/ecp_nistz256-{!x86_64}.pl: fix scatter_w7 function.

The ecp_nistz256_scatter_w7 function is called when application
attempts to use custom generator, i.e. rarely. Even though non-x86_64
versions were wrong, it didn't affect point operations, they were just
not as fast as expected.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)

bn/bn_intern.c: const-ify bn_set_{static}_words.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)

apps/dsaparam.c: fix -C output.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6758)

Configure: Display error/warning on deprecated/unsupported options after loop

Fixes #6755

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6759)

PKCS12: change safeContentsBag from a SET OF to a SEQUENCE OF

As per RFC 7292.

Fixes #6665

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6708)

Add TODO comment for a nonsensical public API

The API used to set what SNI value to send in the ClientHello
can also be used on server SSL objects, with undocumented and
un-useful behavior.  Unfortunately, when generic SSL_METHODs
are used, s->server is still set, prior to the start of the
handshake, so we cannot prevent this nonsensical usage at the
present time.  Leave a note to revisit this when ABI-breaking
changes are permitted.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)

Normalize SNI hostname handling for SSL and SSL_SESSION

In particular, adhere to the rule that we must not modify any
property of an SSL_SESSION object once it is (or might be) in
a session cache.  Such modifications are thread-unsafe and have
been observed to cause crashes at runtime.

To effect this change, standardize on the property that
SSL_SESSION->ext.hostname is set only when that SNI value
has been negotiated by both parties for use with that session.
For session resumption this is trivially the case, so only new
handshakes are affected.

On the client, the new semantics are that the SSL->ext.hostname is
for storing the value configured by the caller, and this value is
used when constructing the ClientHello.  On the server, SSL->ext.hostname
is used to hold the value received from the client.  Only if the
SNI negotiation is successful will the hostname be stored into the
session object; the server can do this after it sends the ServerHello,
and the client after it has received and processed the ServerHello.

This obviates the need to remove the hostname from the session object
in case of failed negotiation (a change that was introduced in commit
9fb6cb810b769abbd60f11ef6e936a4e4456b19d in order to allow TLS 1.3
early data when SNI was present in the ClientHello but not the session
being resumed), which was modifying cached sessions in certain cases.
(In TLS 1.3 we always produce a new SSL_SESSION object for new
connections, even in the case of resumption, so no TLS 1.3 handshakes
were affected.)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)

const-ify some input SSL * arguments

These tiny functions only read from the input SSL, and we are
about to use them from functions that only have a const SSL* available,
so propagate const a bit further.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)

crypto/*: address standard-compilance nits.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

bio/bss_dgram.c: harmonize usage of OPENSSL_USE_IPV6 with the rest.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

include/openssl/e_os2.h: define last-resort SSIZE_MAX.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

ec/ec_lcl.h: fix pre-C9x compilation problems.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

.travis.yml: exercise -std=c89 in order to catch corresponding problems.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)

Validate legacy_version

The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.

Fixes #6600

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)

Update the TLSv1.3 test vectors

Use the latest version of the test vectors available in:
https://tools.ietf.org/html/draft-ietf-tls-tls13-vectors-06

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6746)

Test early_data sent after a second ClientHello causes a failure

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6737)

Don't skip over early_data if we sent an HRR

It is not valid to send early_data after an HRR has been received.

Fixes #6734

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6737)

CHANGES: mention blinding reverting in ECDSA. [skip ci]

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

ec/ecdsa_ossl.c: switch to fixed-length Montgomery multiplication.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

ec/ecdsa_ossl.c: formatting and readability fixes.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

ec/ecdsa_ossl.c: revert blinding in ECDSA signature.

Originally suggested solution for "Return Of the Hidden Number Problem"
is arguably too expensive. While it has marginal impact on slower
curves, none to ~6%, optimized implementations suffer real penalties.
Most notably sign with P-256 went more than 2 times[!] slower. Instead,
just implement constant-time BN_mod_add_quick.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)

bn/bn_lib.c address Coverity nit in bn2binpad.

It was false positive, but one can as well view it as readability issue.
Switch even to unsigned indices because % BN_BYTES takes 4-6 instructions
with signed dividend vs. 1 (one) with unsigned.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test for mismatch between key OID and sig alg

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)

Check that the public key OID matches the sig alg

Using the rsa_pss_rsae_sha256 sig alg should imply that the key OID is
rsaEncryption. Similarly rsa_pss_pss_sha256 implies the key OID is
rsassaPss. However we did not check this and incorrectly tolerated a key
OID that did not match the sig alg sent by the peer.

Fixes #6611

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)

Fix typo in x25519-x86_64.pl

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6726)

Skip the GOST test where appropriate

The GOST ciphers are dynamically loaded via the GOST engine, so we must
be able to support that. The engine also uses DSA and CMS symbols, so we
skip the test on no-dsa or no-cms.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6730)

Fix a memory leak in the ticket test

Also fixes a function name typo.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6729)

Fix no-psk

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6724)

Test that a failed resumption issues the correct number of tickets

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Always issue new tickets when using TLSv1.3 stateful tickets

Previously we were failing to issue new tickets if a resumption attempt
failed.

Fixes #6654

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Improve testing of stateful tickets

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Don't remove sessions from the cache during PHA in TLSv1.3

If we issue new tickets due to post-handshake authentication there is no
reason to remove previous tickets from the cache. The code that did that
only removed the last session anyway - so if more than one ticket got
issued then those other tickets are still valid.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)

Improve documentation about reading and writing

Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6240

Enable all protocols and ciphers in the fuzzer

The config file can override it.
In case of the server, it needs to be set on the ctx or some of the
other functions on the ctx might file.

Reviewed-by: Rich Salz <rsalz@openssl.org>
DH: #6718

EC2M Lopez-Dahab ladder: use it also for ECDSA verify

By default `ec_scalar_mul_ladder` (which uses the Lopez-Dahab ladder
implementation) is used only for (k * Generator) or (k * VariablePoint).
ECDSA verification uses (a * Generator + b * VariablePoint): this commit
forces the use of `ec_scalar_mul_ladder` also for the ECDSA verification
path, while using the default wNAF implementation for any other case.

With this commit `ec_scalar_mul_ladder` loses the static attribute, and
is added to ec_lcl.h so EC_METHODs can directly use it.

While working on a new custom EC_POINTs_mul implementation, I realized
that many checks (e.g. all the points being compatible with the given
EC_GROUP, creating a temporary BN_CTX if `ctx == NULL`, check for the
corner case `scalar == NULL && num == 0`) were duplicated again and
again in every single implementation (and actually some
implementations lacked some of the tests).
I thought that it makes way more sense for those checks that are
independent from the actual implementation and should always be done, to
be moved in the EC_POINTs_mul wrapper: so this commit also includes
these changes.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)

EC2M Lopez-Dahab ladder implementation

This commit uses the new ladder scaffold to implement a specialized
ladder step based on differential addition-and-doubling in mixed
Lopez-Dahab projective coordinates, modified to independently blind the
operands.

The arithmetic in `ladder_pre`, `ladder_step` and `ladder_post` is
auto generated with tooling:
- see, e.g., "Guide to ECC" Alg 3.40 for reference about the
  `ladder_pre` implementation;
- see https://www.hyperelliptic.org/EFD/g12o/auto-code/shortw/xz/ladder/mladd-2003-s.op3
  for the differential addition-and-doubling formulas implemented in
  `ladder_step`;
- see, e.g., "Fast Multiplication on Elliptic Curves over GF(2**m)
  without Precomputation" (Lopez and Dahab, CHES 1999) Appendix Alg Mxy
  for the `ladder_post` implementation to recover the `(x,y)` result in
  affine coordinates.

Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)

[test] test some important ladder corner cases
and catch corner cases better and earlier

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)

EC point multiplication: add `ladder` scaffold
for specialized Montgomery ladder implementations

PR #6009 and #6070 replaced the default EC point multiplication path for
prime and binary curves with a unified Montgomery ladder implementation
with various timing attack defenses (for the common paths when a secret
scalar is feed to the point multiplication).
The newly introduced default implementation directly used
EC_POINT_add/dbl in the main loop.

The scaffolding introduced by this commit allows EC_METHODs to define a
specialized `ladder_step` function to improve performances by taking
advantage of efficient formulas for differential addition-and-doubling
and different coordinate systems.

- `ladder_pre` is executed before the main loop of the ladder: by
  default it copies the input point P into S, and doubles it into R.
  Specialized implementations could, e.g., use this hook to transition
  to different coordinate systems before copying and doubling;
- `ladder_step` is the core of the Montgomery ladder loop: by default it
  computes `S := R+S; R := 2R;`, but specific implementations could,
  e.g., implement a more efficient formula for differential
  addition-and-doubling;
- `ladder_post` is executed after the Montgomery ladder loop: by default
  it's a noop, but specialized implementations could, e.g., use this
  hook to transition back from the coordinate system used for optimizing
  the differential addition-and-doubling or recover the y coordinate of
  the result point.

This commit also renames `ec_mul_consttime` to `ec_scalar_mul_ladder`,
as it better corresponds to what this function does: nothing can be
truly said about the constant-timeness of the overall execution of this
function, given that the underlying operations are not necessarily
constant-time themselves.
What this implementation ensures is that the same fixed sequence of
operations is executed for each scalar multiplication (for a given
EC_GROUP), with no dependency on the value of the input scalar.

Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)

Remove stale SM2 error codes

Run `make update ERROR_REBUILD=-rebuild` to remove some stale error
codes for SM2 (which is now using its own submodule for error codes,
i.e., `SM2_*`).

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)

ec/curve25519.c: reorganize for better accessibility.

Move base 2^64 code to own #if section. It was nested in base 2^51 section,
which arguably might have been tricky to follow.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)

ec/asm/x25519-x86_64.pl: add CFI directives and Windows SE handler.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)

test/.../evppkey.txt: X25519 regression test vectors.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)

ec/asm/x25519-x86_64.pl: fix base 2^64 add/sub and final reduction.

Base 2^64 addition/subtraction and final reduction failed to treat
partially reduced values correctly.

Thanks to Wycheproof Project for vectors and Paul Kehrer for report.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)

bn/bn_lcl.h,bn_nist.c: addres strict warnings with -DBN_DEBUG.

Reviewed-by: Rich Salz <rsalz@openssl.org>

rsa/*: switch to BN_bn2binpad.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5254)

bn/bn_lib.c: make BN_bn2binpad computationally constant-time.

"Computationally constant-time" means that it might still leak
information about input's length, but only in cases when input
is missing complete BN_ULONG limbs. But even then leak is possible
only if attacker can observe memory access pattern with limb
granularity.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5254)

Add a GOST test

Test that we never negotiate TLSv1.3 using GOST

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)

As a server don't select TLSv1.3 if we're not capable of it

Check that we are either configured for PSK, or that we have a TLSv1.3
capable certificate type. DSA certs can't be used in TLSv1.3 and we
don't (currently) allow GOST ones either (owing to the lack of standard
sig algs).

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)

Use ssl_version_supported() when choosing server version

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)

Do not use GOST sig algs in TLSv1.3 where possible

Fixes #6513

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)

Documentation typo fix in BN_bn2bin.pod

Change the description for BN_hex2bn() so that it uses the same BIGNUM argument name as its prototype.

CLA: trivial

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6712)

Fix undefined behavior in s390x aes-gcm/ccm

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>

bn/bn_{mont|exp}.c: switch to zero-padded intermediate vectors.

Note that exported functions maintain original behaviour, so that
external callers won't observe difference. While internally we can
now perform Montogomery multiplication on fixed-length vectors, fixed
at modulus size. The new functions, bn_to_mont_fixed_top and
bn_mul_mont_fixed_top, are declared in bn_int.h, because one can use
them even outside bn, e.g. in RSA, DSA, ECDSA...

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)

bn/bn_lib.c: add BN_FLG_FIXED_TOP flag.

The new flag marks vectors that were not treated with bn_correct_top,
in other words such vectors are permitted to be zero padded. For now
it's BN_DEBUG-only flag, as initial use case for zero-padded vectors
would be controlled Montgomery multiplication/exponentiation, not
general purpose. For general purpose use another type might be more
appropriate. Advantage of this suggestion is that it's possible to
back-port it...

bn/bn_div.c: fix memory sanitizer problem.
bn/bn_sqr.c: harmonize with BN_mul.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)

bn/bn_mont.c: improve readability of post-condition code.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)

bn/bn_mont.c: move boundary condition check closer to caller.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)

bn/bn_lib.c: remove bn_check_top from bn_expand2.

Trouble is that addition is postponing expansion till carry is
calculated, and if addition carries, top word can be zero, which
triggers assertion in bn_check_top.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)

apps/speed.c: let EVP_Update_loop_ccm behave more like EVP_Update_loop

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5246)

Windows: avoid using 'rem' in the nmake makefile

To avoid the possibility that someone creates rem.exe, rem.bat or
rem.cmd, simply don't use it.  In the cases it was used, it was to
avoid empty lines, but it turns out that nmake handles those fine, so
no harm done.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6686)

Windows: fix echo for nmake

It seems that nmake first tries to run executables on its own, and
only pass commands to cmd if that fails.  That means it's possible to
have nmake run something like 'echo.exe' when the builtin 'echo'
command was expected, which might give us unexpected results.

To get around this, we create our own echoing script and call it
explicitly from the nmake makefile.

Fixes #6670

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6686)

NCONF_get_number refix.

Fix the NULL check lack in a different way that is more compatible with
non-NULL branch.  Refer #6632

Also mark and pop the error stack instead of clearing all errors when something
goes awry in CONF_get_number.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6643)

Guard DECLARE_DEPRECATED against multiple includes of opensslconf.h

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6689)

util/dofile.pl: require Text::Template 1.46 or newer

The reason is that we override Text::Template::append_text_to_output(),
and it didn't exist before Text::Template 1.46.

Fixes #6641

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6682)

Existing transfer modules must have a package and a $VERSION

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6682)

Make 'with_fallback' use 'use' instead of 'require'

This enables us to require module versions, and to fall back to a
bundled version if the system version is too low.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6682)

Avoid __GNUC__ warnings when defining DECLARE_DEPRECATED

We need to check that __GNUC__ is defined before trying to use it.
This demands a slightly different way to define DECLARE_DEPRECATED.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6680)

poly1305/asm/poly1305-x86_64.pl: fix solaris64-x86_64-cc build.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6676)

Add tests for the "req" command, -addext flag

Also fixed a memory leak found by the test.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6681)

Fix minor windows build issues

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6661)

apps/req.c: fix -addext option.

Address even Coverity nit.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6671)

Correctly check for cryptodev hash support

The sense of the check for build-time support for most hashes was inverted.

CLA: trivial

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6673)

modes/ocb128.c: readability and formatting improvements.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6669)

modes/ocb128.c: improve the calculation of double mask

CLA: trivial

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6667)

Keep supporting the env / make variable PERL

OpenSSL 1.1.0 supports the use of this environment variable for
passing to the build files.  For the sake of backward compatibility,
we keep it.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6668)

Update AUTHORS list, add commentary

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6602)

Update DRBG CHANGES section

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #6666

Remove a memset

Also avoids calling EVP_MD_size() and a missing negative result check.

Issue found by Coverity.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)

Check a return value for success in ec_field_size()

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)

Fix some Coverity issues in sm2_encrypt()

Check for a negative EVP_MD_size().
Don't dereference group until we've checked if it is NULL.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)

Check md_size isn't negative before we use it

Issue found by Coverity

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)

Don't fail if the PSK identity doesn't match

In 1.1.0 s_server if the PSK identity doesn't match what we have then
a warning is printed and we continue the connection anyway. In 1.1.1,
if TLSv1.3 is used and the identity doesn't match then we abort the
connection. We should really be consistent with the old behaviour.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6659)

evp/e_chacha20_poly1305.c: further improve small-fragment TLS performance.

Improvement coefficients vary with TLS fragment length and platform, on
most Intel processors maximum improvement is ~50%, while on Ryzen - 80%.
The "secret" is new dedicated ChaCha20_128 code path and vectorized xor
helpers.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6638)

Document SSL_CTX_set_recv_max_early_data() etc

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)

Add the ability to configure recv_max_early_data via s_server

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)