Mansour Ahmadi [Wed, 17 Oct 2018 22:13:57 +0000 (18:13 -0400)]
Check return value of EVP_PKEY_new
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7427)
(cherry picked from commit
d896b79b0994a35ecfd1c8e729d348d67236150e)
Billy Brumley [Fri, 9 Nov 2018 07:25:43 +0000 (09:25 +0200)]
[crypto/bn] swap BN_FLG_FIXED_TOP too
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7599)
(cherry picked from commit
dd41956d80686638d74fd203bd67060f90966280)
Bernd Edlinger [Wed, 7 Nov 2018 20:53:30 +0000 (21:53 +0100)]
Fix issues with do_rand_init/rand_cleanup_int
Fixes #7022
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7588)
(cherry picked from commit
e2d227bb4a25bb75354a40816439630a8162f073)
Richard Levitte [Fri, 9 Nov 2018 11:23:53 +0000 (12:23 +0100)]
VMS build: colon after target must be separated with a space
... otherwise, it's taken to be part of a device name.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7602)
(cherry picked from commit
e9994901f835420764d020968d4588fc09ec74c3)
Richard Levitte [Wed, 7 Nov 2018 15:13:57 +0000 (16:13 +0100)]
Have install targets depend on more precise build targets
We only had the main 'install' target depend on 'all'. This changes
the dependencies so targets like install_dev, install_runtime_libs,
install_engines and install_programs depend on build targets that are
correspond to them more specifically. This increases the parallel
possibilities.
Fixes #7466
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)
(cherry picked from commit
e8d01a608705e4320082a11a3870aa7e19c7290f)
Richard Levitte [Thu, 25 Oct 2018 07:09:20 +0000 (09:09 +0200)]
Allow parallel install
When trying 'make -j{n} install', you may occasionally run into
trouble because to sub-targets (install_dev and install_runtime) try
to install the same shared libraries. That makes parallel install
difficult.
This is solved by dividing install_runtime into two parts, one for
libraries and one for programs, and have install_dev depend on
install_runtime_libs instead of installing the shared runtime
libraries itself.
Fixes #7466
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7583)
(cherry picked from commit
c1123d9f7efb005a109aeccaba82c40bf9bd4c1d)
Paul Yang [Thu, 1 Nov 2018 15:27:31 +0000 (23:27 +0800)]
Fix a doc-nit in EVP_PKEY_CTX_ctrl.pod
[skip-ci]
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7546)
(cherry picked from commit
e5a8712d03334c4b7cb9f29d6d1daee399c1223e)
Dr. Matthias St. Pierre [Thu, 18 Oct 2018 11:27:14 +0000 (13:27 +0200)]
rand_unix.c: open random devices on first use only
Commit
c7504aeb640a (pr #6432) fixed a regression for applications in
chroot environments, which compensated the fact that the new OpenSSL CSPRNG
(based on the NIST DRBG) now reseeds periodically, which the previous
one didn't. Now the reseeding could fail in the chroot environment if the
DEVRANDOM devices were not present anymore and no other entropy source
(e.g. getrandom()) was available.
The solution was to keep the file handles for the DEVRANDOM devices open
by default. In fact, the fix did more than this, it opened the DEVRANDOM
devices early and unconditionally in rand_pool_init(), which had the
unwanted side effect that the devices were opened (and kept open) even
in cases when they were not used at all, for example when the getrandom()
system call was available. Due to a bug (issue #7419) this even happened
when the feature was disabled by the application.
This commit removes the unconditional opening of all DEVRANDOM devices.
They will now only be opened (and kept open) on first use. In particular,
if getrandom() is available, the handles will not be opened unnecessarily.
This change does not introduce a regression for applications compiled for
libcrypto 1.1.0, because the SSLEAY RNG also seeds on first use. So in the
above constellation the CSPRNG will only be properly seeded if it is happens
before the forking and chrooting.
Fixes #7419
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7437)
(cherry picked from commit
8cfc19716c22dac737ec8cfc5f7d085e7c37f4d8)
Dr. Matthias St. Pierre [Thu, 25 Oct 2018 23:13:19 +0000 (01:13 +0200)]
Test: enable internal tests for shared Windows builds
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7462)
(cherry picked from commit
1901516a4ba909fff12e0e7815aa2d499f4d6d67)
Dr. Matthias St. Pierre [Mon, 22 Oct 2018 16:05:14 +0000 (18:05 +0200)]
Test: link drbgtest statically against libcrypto
and remove duplicate rand_drbg_seedlen() implementation again.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7462)
(cherry picked from commit
1c615e4ce97715ae3af9255bc57be32a49687966)
Matt Caswell [Fri, 26 Oct 2018 14:29:15 +0000 (15:29 +0100)]
Give a better error if an attempt is made to set a zero length groups list
Previously we indicated this as a malloc failure which isn't very
helpful.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7479)
(cherry picked from commit
680bd131b69d57e891888ab70d300176a5a16617)
Matt Caswell [Wed, 24 Oct 2018 09:11:00 +0000 (10:11 +0100)]
Ignore disabled ciphers when deciding if we are using ECC
use_ecc() was always returning 1 because there are default (TLSv1.3)
ciphersuites that use ECC - even if those ciphersuites are disabled by
other options.
Fixes #7471
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/7479)
(cherry picked from commit
589b6227a85ea0133fe91d744b16dd72edee929a)
Pauli [Wed, 7 Nov 2018 21:22:01 +0000 (07:22 +1000)]
Add missing RAND initialisation call.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7587)
(cherry picked from commit
ac765685d4b08a48cefffc71c434760045154dad)
Bernd Edlinger [Mon, 5 Nov 2018 22:13:11 +0000 (23:13 +0100)]
Rename the rand_drbg_st data member "pool" to "seed_pool"
... to make the intended use more clear and differentiate
it from the data member "adin_pool".
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7575)
(cherry picked from commit
31f32abb8eb2a3ebd8500e6e0460b4a6791e5ed7)
Bernd Edlinger [Tue, 30 Oct 2018 22:09:56 +0000 (23:09 +0100)]
Initialize reseed_gen_counter to 1, like it is done in master
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7532)
Richard Levitte [Thu, 1 Nov 2018 13:02:21 +0000 (14:02 +0100)]
util/add-depends.pl: go through shared_sources too
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7545)
(cherry picked from commit
3866b2247fb7904a4e660593a16365147f479415)
Bernd Edlinger [Tue, 30 Oct 2018 21:21:34 +0000 (22:21 +0100)]
Fix a race condition in drbgtest.c
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7531)
(cherry picked from commit
2bb1b5ddd12c23bbfa7fb60ee3296612ca943fef)
Bernd Edlinger [Sat, 27 Oct 2018 09:31:21 +0000 (11:31 +0200)]
Avoid two memory allocations in each RAND_DRBG_bytes
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7518)
Bernd Edlinger [Fri, 2 Nov 2018 10:46:38 +0000 (11:46 +0100)]
Fix error handling in RAND_DRBG_uninstantiate
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7519)
Bernd Edlinger [Tue, 30 Oct 2018 20:02:22 +0000 (21:02 +0100)]
Fix error handling in drbgtest.c
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7519)
Bernd Edlinger [Tue, 30 Oct 2018 19:57:53 +0000 (20:57 +0100)]
Fix error handling in rand_drbg_new
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7519)
Bernd Edlinger [Mon, 29 Oct 2018 12:48:53 +0000 (13:48 +0100)]
Fix error handling in RAND_DRBG_set
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7519)
Pauli [Mon, 5 Nov 2018 21:06:25 +0000 (07:06 +1000)]
Fix return formatting.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7564)
(cherry picked from commit
2087028612027368e9508e1b253aab715a5a35d6)
Pauli [Mon, 5 Nov 2018 01:04:23 +0000 (11:04 +1000)]
Cleanse the key log buffer.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7564)
(cherry picked from commit
e931f370aa38d8645b35fb8d6260cb44d37b6b61)
Benjamin Kaduk [Mon, 22 Oct 2018 16:54:20 +0000 (11:54 -0500)]
Restore sensible "sess_accept" counter tracking
Commit
9ef9088c1585e13b9727796f15f77da64dbbe623 switched the SSL/SSL_CTX
statistics counters to using Thread-Sanitizer-friendly primitives.
However, it erroneously converted an addition of -1
(for s->session_ctx->stats.sess_accept) to an addition of +1, since that
is the only counter API provided by the internal tsan_assist.h header
until the previous commit. This means that for each accepted (initial)
connection, the session_ctx's counter would get doubly incremented, and the
(switched) ctx's counter would also get incremented.
Restore the counter decrement so that each accepted connection increments
exactly one counter exactly once (in net effect).
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7464)
(cherry picked from commit
2aaa0b146b967397a6e61fa8df969e7847f82086)
Benjamin Kaduk [Mon, 22 Oct 2018 16:51:35 +0000 (11:51 -0500)]
Add tsan_decr() API, counterpart of tsan_counter()
The existing tsan_counter() API increments a reference counter.
Provide a new API, tsan_decr(), to decrement such a reference counter.
This can be used, for example, when a reference is added to the session_ctx's
sess_accept stats but should more properly be tracked in the regular ctx's
statistics.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7464)
(cherry picked from commit
95658c32436017aeeef3d8598957071baf6769a9)
Richard Levitte [Fri, 2 Nov 2018 09:24:24 +0000 (10:24 +0100)]
crypto/engine/eng_devcrypto.c: ensure we don't leak resources
If engine building fails for some reason, we must make sure to close
the /dev/crypto handle.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7506)
(cherry picked from commit
681e8cacdbdc44ac00af29b6656fc52745a9baa2)
Richard Levitte [Wed, 31 Oct 2018 18:23:44 +0000 (19:23 +0100)]
crypto/engine/eng_devcrypto.c: open /dev/crypto only once
We opened /dev/crypto once for each session, which is quite unnecessary.
With this change, we open /dev/crypto once at engine init, and close
it on unload.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7506)
(cherry picked from commit
458c7dad9e3f59490fb0908c1a27ca39e4cf38dd)
Richard Levitte [Sat, 27 Oct 2018 07:26:22 +0000 (09:26 +0200)]
crypto/engine/eng_devcrypto.c: new compilers are strict on prototypes
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7506)
(cherry picked from commit
28ac1bd9a97d9725273956e26d89ccfa5b4de67b)
Richard Levitte [Sat, 27 Oct 2018 07:15:04 +0000 (09:15 +0200)]
crypto/engine/eng_devcrypto.c: add digest copy
Copying an EVP_MD_CTX, including the implementation local bits, is a
necessary operation. In this case, though, it's the same as
initializing the local bits to be "copied to".
Fixes #7495
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7506)
(cherry picked from commit
36af124bfb209b49cb92a5fb9fab627d9cd4a44b)
Richard Levitte [Thu, 18 Oct 2018 22:36:04 +0000 (00:36 +0200)]
apps: Stop pretending to care about Netscape keys
The documentation says some commands care, but the code says differently.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7440)
(cherry picked from commit
d91d443f0d26262148d1dc9d29f9fdf025b958ca)
Pauli [Wed, 31 Oct 2018 22:44:11 +0000 (08:44 +1000)]
Add a constant time flag to one of the bignums to avoid a timing leak.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7549)
(cherry picked from commit
00496b6423605391864fbbd1693f23631a1c5239)
Richard Levitte [Sun, 21 Oct 2018 09:11:04 +0000 (11:11 +0200)]
Configuration: when building the dirinfo structure, include shared_sources
This makes sure that any resulting directory target in the build files
also depend on object files meant for shared libraries.
As a side effect, we move the production of the dirinfo structure from
common.tmpl to Configure, to make it easier to check the result.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7452)
(cherry picked from commit
b6e660754c2e799cffe4906269fcace0e07c73bc)
Andy Polyakov [Fri, 19 Oct 2018 20:24:30 +0000 (22:24 +0200)]
Configurations/15-android.conf: detect NDK llvm-ar.
This excluses user from additional PATH adjustments in case NDK has
llvm-ar.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7443)
(cherry picked from commit
ddf2e8c8ccad49cff0d6a0a0b26ca892ec4ce33a)
Andy Polyakov [Fri, 19 Oct 2018 14:03:28 +0000 (16:03 +0200)]
Configurations/15-android.conf: fix implicit __ANDROID_API__ handling.
03ad7c009e16a233c733098db3169c560142ccd3 failed if one didn't pass
explicit -D__ANDROID_API__=N :-(
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7443)
(cherry picked from commit
71f2b3171e8b94b0fbdc7fab2d7ca4ea66edec2b)
Bernd Edlinger [Mon, 29 Oct 2018 12:48:53 +0000 (13:48 +0100)]
Fix a race condition in drbg_add
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7523)
(cherry picked from commit
4011bab1f85d4429bad1e9388bed90a8d0da5639)
Matt Caswell [Tue, 16 Oct 2018 11:42:59 +0000 (12:42 +0100)]
Add a client_cert_cb test
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7413)
(cherry picked from commit
6e46c065b9b97212d63ef1f321b08fb7fa6b320d)
Matt Caswell [Thu, 11 Oct 2018 16:01:06 +0000 (17:01 +0100)]
Don't call the client_cert_cb immediately in TLSv1.3
In TLSv1.2 and below a CertificateRequest is sent after the Certificate
from the server. This means that by the time the client_cert_cb is called
on receipt of the CertificateRequest a call to SSL_get_peer_certificate()
will return the server certificate as expected. In TLSv1.3 a
CertificateRequest is sent before a Certificate message so calling
SSL_get_peer_certificate() returns NULL.
To workaround this we delay calling the client_cert_cb until after we
have processed the CertificateVerify message, when we are doing TLSv1.3.
Fixes #7384
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7413)
(cherry picked from commit
e45620140fce22c3251440063bc17440289d730c)
Dr. Matthias St. Pierre [Mon, 29 Oct 2018 21:27:42 +0000 (22:27 +0100)]
rand_drbg.h: include <openssl/obj_mac.h>
The RAND_DRBG_TYPE preprocessor define depends on a NID, so we have
to include obj_mac.h to make the header selfcontained.
Fixes #7521
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7524)
(cherry picked from commit
cf3d6ef7af7d6c47f5ccd4ce58d822972018b21c)
Chocobo1 [Fri, 19 Oct 2018 14:05:49 +0000 (22:05 +0800)]
Fix MSVC warning C4819
CLA: trivial
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7444)
(cherry picked from commit
cf4eea12046445fc418507d2d5e14956b4353495)
Richard Levitte [Fri, 26 Oct 2018 11:42:40 +0000 (13:42 +0200)]
test/evp_test.c: don't misuse pkey_test_ctrl() in mac_test_run()
pkey_test_ctrl() was designed for parsing values, not for using in
test runs. Relying on its returned value when it returned 1 even for
control errors made it particularly useless for mac_test_run().
Here, it gets replaced with a MAC specific control function, that
parses values the same way but is designed for use in a _run() rather
than a _parse() function.
This uncovers a SipHash test with an invalid control that wasn't
caught properly. After all, that stanza is supposed to test that
invalid control values do generate an error. Now we catch that.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7500)
(cherry picked from commit
ce5d64c79c4d809ece8fe28a5b62915467a1c0e1)
Matt Caswell [Fri, 26 Oct 2018 11:45:27 +0000 (12:45 +0100)]
Add a test where we reuse the EVP_PKEY_CTX for two HKDF test runs
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7501)
(cherry picked from commit
10d5b415f9e973f44f18eeaf2713868ec813e1d7)
Matt Caswell [Fri, 26 Oct 2018 11:19:43 +0000 (12:19 +0100)]
Reset the HKDF state between operations
Fixes #7497
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7501)
(cherry picked from commit
ca55d70be031746daddd8bd0611db54ed81f1737)
Richard Levitte [Tue, 23 Oct 2018 08:35:48 +0000 (10:35 +0200)]
Windows build: build foo.d after foo.obj
We made the build of foo.obj depend on foo.d, meaning the latter gets
built first. Unfortunately, the way the compiler works, we are forced
to redirect all output to foo.d, meaning that if the source contains
an error, the build fails without showing those errors.
We therefore remove the dependency and force the build of foo.d to
always happen after build of foo.obj.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7469)
(cherry picked from commit
ecc347f5f53a9f2edc2805d50cba07db64267e8a)
Richard Levitte [Wed, 12 Sep 2018 00:31:10 +0000 (02:31 +0200)]
ssl/statem: Don't compare size_t with less than zero
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7194)
(cherry picked from commit
60690b5b8396d7d5234cd067206190fb8aca78d2)
Richard Levitte [Wed, 12 Sep 2018 00:30:25 +0000 (02:30 +0200)]
VMS & cryptoerr.h: include symhacks.h
Needed to clear a clash between ERR_load_CRYPTO_strings and
ERR_load_crypto_strings
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7194)
(cherry picked from commit
cc3a2e4f51679d99507a979f9a920f6068473aa2)
Richard Levitte [Wed, 12 Sep 2018 00:28:35 +0000 (02:28 +0200)]
apps/rehash.c: Convert ISO-8859-1 to UTF-8
Believe it or not, the VMS C compiler is remarking on this
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7194)
(cherry picked from commit
4602cc85aff35b7aa5e27dc57ead89f0867637f9)
Bernd Edlinger [Fri, 26 Oct 2018 19:06:14 +0000 (21:06 +0200)]
Rework and simplify resource flow in drbg_add
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7504)
(cherry picked from commit
f9e43929c46b38667f67e02765fe0f1c0d3061d6)
Dr. Matthias St. Pierre [Sun, 28 Oct 2018 12:32:11 +0000 (13:32 +0100)]
randfile.c: fix a Coverity warning
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7510)
(cherry picked from commit
040a03470c7c5bf95fe8e6143db7bef357a22833)
Pauli [Fri, 26 Oct 2018 00:54:58 +0000 (10:54 +1000)]
Timing vulnerability in ECDSA signature generation (CVE-2018-0735)
Preallocate an extra limb for some of the big numbers to avoid a reallocation
that can potentially provide a side channel.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7486)
(cherry picked from commit
99540ec79491f59ed8b46b4edf130e17dc907f52)
Pauli [Tue, 23 Oct 2018 21:42:46 +0000 (07:42 +1000)]
Timing vulnerability in DSA signature generation (CVE-2018-0734).
Avoid a timing attack that leaks information via a side channel that
triggers when a BN is resized. Increasing the size of the BNs
prior to doing anything with them suppresses the attack.
Thanks due to Samuel Weiser for finding and locating this.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7486)
(cherry picked from commit
a9cfb8c2aa7254a4aa6a1716909e3f8cb78049b6)
Pauli [Sun, 28 Oct 2018 20:50:51 +0000 (06:50 +1000)]
DSA mod inverse fix
There is a side channel attack against the division used to calculate one of
the modulo inverses in the DSA algorithm. This change takes advantage of the
primality of the modulo and Fermat's little theorem to calculate the inverse
without leaking information.
Thanks to Samuel Weiser for finding and reporting this.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7487)
(cherry picked from commit
415c33563528667868c3c653a612e6fc8736fd79)
Dr. Matthias St. Pierre [Sun, 28 Oct 2018 12:46:35 +0000 (13:46 +0100)]
drbg_lib: avoid NULL pointer dereference in drbg_add
Found by Coverity Scan
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7511)
(cherry picked from commit
59f90557dd6e35cf72ac72016609d759ac78fcb9)
Richard Levitte [Mon, 15 Oct 2018 16:37:18 +0000 (18:37 +0200)]
iOS config targets: disable "async" by default
This also gave enough reason to collect the stuff that's common for
all iOS config targets into the template "ios-common".
Fixes #7318
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7403)
(cherry picked from commit
04e3f9a114c2c142356ef1639d68397a72e0c7f8)
Dr. Matthias St. Pierre [Sun, 28 Oct 2018 11:38:49 +0000 (12:38 +0100)]
Configure: Improve warning if no random seed source was configured
The new Configure summary box (
41349b5e6db) now hides the warning
about the missing seed source (
2805ee1e095) too much. To make it
more visible again, add warning markers.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7509)
(cherry picked from commit
caa8595276c60f009c8621ad466338d2ae39fb86)
Bernd Edlinger [Sun, 14 Oct 2018 10:35:19 +0000 (12:35 +0200)]
Fix data race in RAND_DRBG_generate
Fixes #7394
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7399)
(cherry picked from commit
a83dc59afa2e0207180d7218efed19b20d48de95)
Dr. Matthias St. Pierre [Sun, 21 Oct 2018 13:45:34 +0000 (15:45 +0200)]
RAND_add()/RAND_seed(): fix failure on short input or low entropy
Commit
5b4cb385c18a (#7382) introduced a bug which had the effect
that RAND_add()/RAND_seed() failed for buffer sizes less than
32 bytes. The reason was that now the added random data was used
exlusively as entropy source for reseeding. When the random input
was too short or contained not enough entropy, the DRBG failed
without querying the available entropy sources.
This commit makes drbg_add() act smarter: it checks the entropy
requirements explicitely. If the random input fails this check,
it won't be added as entropy input, but only as additional data.
More precisely, the behaviour depends on whether an os entropy
source was configured (which is the default on most os):
- If an os entropy source is avaible then we declare the buffer
content as additional data by setting randomness to zero and
trigger a regular reseeding.
- If no os entropy source is available, a reseeding will fail
inevitably. So drbg_add() uses a trick to mix the buffer contents
into the DRBG state without forcing a reseeding: it generates a
dummy random byte, using the buffer content as additional data.
Related-to: #7449
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7456)
(cherry picked from commit
8817215d5c52a76f2b184b624bde4df8556dee6d)
Dr. Matthias St. Pierre [Fri, 26 Oct 2018 20:10:27 +0000 (22:10 +0200)]
Backport some DRBG renamings and typo fixes
In commit
8bf366519661 some renamings andd typo fixes were made
while adding back the DRBG-HMAC and DRBG-HASH implementation.
Since the commit could not be backported, a lot of unnecessary
differences between master and 1.1.1 were introduced.
These differences result in tiresome merge conflicts when
cherry-picking. To minimize these merge-conflicts, this patch
ports all 'non-feature' changes of commit
8bf366519661
(e.g., renamings of private variables, fixes of typographical
errors, comment changes) manually back to 1.1.1.
The commits
a83dc59afa2e (#7399) and
8817215d5c52 (#7456)
failed to cherry-pick previously to 1.1.1, with this patch
they both cherry-pick without conflicts.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/7505)
Matt Caswell [Tue, 16 Oct 2018 16:03:39 +0000 (17:03 +0100)]
Add a test for duplicated DTLS records
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7414)
(cherry picked from commit
f1358634af5b84be22cb20fff3dcb613f5f8c978)
Matt Caswell [Tue, 16 Oct 2018 16:08:11 +0000 (17:08 +0100)]
Properly handle duplicated messages from the next epoch
Since
1fb9fdc30 we may attempt to buffer a record from the next epoch
that has already been buffered. Prior to that this never occurred.
We simply ignore a failure to buffer a duplicated record.
Fixes #6902
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7414)
(cherry picked from commit
840facc3ccab481e1a0bc2cb6e7740e362df7422)
Bernd Edlinger [Tue, 23 Oct 2018 14:30:20 +0000 (16:30 +0200)]
Fix a possible crash in rand_drbg_get_entropy
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7474)
(cherry picked from commit
21311777ad8b8c2f2fb8eb7a4f9618ceae1e043d)
Dr. Matthias St. Pierre [Thu, 25 Oct 2018 21:31:24 +0000 (23:31 +0200)]
Configure: Reword the summary output
In commit
820e414d2830 (pr #5247) the summary output of the
Configure command was optimized towards instructing people
how to create issue reports.
It turned out that the wording of this message can confuse new
OpenSSL users and make them think that they are seeing an error
message. This commit makes the summary output start with a success
to prevent a misunderstanding. Also it gives more hints to new
OpenSSL users.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7499)
(cherry picked from commit
41349b5e6dbd72bfbeaf3cf189d64914240628e3)
Dr. Matthias St. Pierre [Sun, 21 Oct 2018 16:49:19 +0000 (18:49 +0200)]
RAND_load_file(): avoid adding small chunks to RAND_add()
Increase the load buffer size such that it exceeds the chunk
size by a comfortable amount. This is done to avoid calling
RAND_add() with a small final chunk. Instead, such a small
final chunk will be added together with the previous chunk
(unless it's the only one).
Related-to: #7449
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7456)
Dr. Matthias St. Pierre [Sat, 20 Oct 2018 14:53:57 +0000 (16:53 +0200)]
RAND_load_file(): return error if reseeding failed
The failure of RAND_load_file was only noticed because of the
heap corruption which was reported in #7499 and fixed in commit
5b4cb385c18a. To prevent this in the future, RAND_load_file()
now explicitly checks RAND_status() and reports an error if it
fails.
Related-to: #7449
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7456)
Richard Levitte [Thu, 25 Oct 2018 13:55:15 +0000 (15:55 +0200)]
Windows: Produce a static version of the public libraries, always
When building shared libraries on Windows, we had a clash between
'libcrypto.lib' the static routine library and 'libcrypto.lib' the
import library.
We now change it so the static versions of our libraries get '_static'
appended to their names. These will never get installed, but can
still be used for our internal purposes, such as internal tests.
When building non-shared, the renaming mechanism doesn't come into
play. In that case, the static libraries 'libcrypto.lib' and
'libssl.lib' are installed, just as always.
Fixes #7492
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7496)
(cherry picked from commit
b3023ced6b6a4aece6f4d4ec1f6a93b1c03712b6)
Richard Levitte [Tue, 23 Oct 2018 08:15:12 +0000 (10:15 +0200)]
RAND: ensure INT32_MAX is defined
This value is used to set DRBG_MAX_LENGTH
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7467)
(cherry picked from commit
f81b043ad856d8b9af5239a4978f8bd4b965dab9)
Dr. Matthias St. Pierre [Sat, 20 Oct 2018 14:53:09 +0000 (16:53 +0200)]
RAND_add(): fix heap corruption in error path
This bug was introduced by #7382 which enhanced RAND_add() to
accept large buffer sizes. As a consequence, RAND_add() now fails
for buffer sizes less than 32 bytes (i.e. less than 256 bits).
In addition, rand_drbg_get_entropy() forgets to reset the attached
drbg->pool in the case of an error, which leads to the heap corruption.
The problem occurred with RAND_load_file(), which reads the file in
chunks of 1024 bytes each. If the size of the final chunk is less than
32 bytes, then RAND_add() fails, whence RAND_load_file() fails
silently for buffer sizes n = k * 1024 + r with r = 1,...,31.
This commit fixes the heap corruption only. The other issues will
be addressed in a separate pull request.
Thanks to Gisle Vanem for reporting this issue.
Fixes #7449
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7455)
(cherry picked from commit
5b4cb385c18a5bb4e118e300f1c746bf7c2a5628)
Richard Levitte [Sun, 21 Oct 2018 09:03:02 +0000 (11:03 +0200)]
build file templates: have targets for all shared library names
We only had targets for the "simple" shared library names (libfoo.so
and not libfoo.so.x.y on Unix, import library libfoo.lib but not
libfoo.dll on Windows). This has created some confusion why it wasn't
possible to rebuild the less "simple" name directly (just as an
example, someone who mistook the import library on Windows for a
static library, removed the DLL and then found it was difficult to
rebuild directly), so we change the target to include all possible
names.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7451)
(cherry picked from commit
d8cac50b023be249cdaba054f43acecf17025ce4)
Matt Caswell [Thu, 18 Oct 2018 13:45:59 +0000 (14:45 +0100)]
Don't complain and fail about unknown TLSv1.3 PSK identities in s_server
An unknown PSK identity could be because its actually a session resumption
attempt. Sessions resumptions and external PSKs are indistinguishable so
the callbacks need to fail gracefully if they don't recognise the identity.
Fixes #7433
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7434)
(cherry picked from commit
2d015189b97c60b67e10aed320230357bf6b200f)
Matt Caswell [Tue, 9 Oct 2018 09:22:06 +0000 (10:22 +0100)]
Buffer a ClientHello with a cookie received via DTLSv1_listen
Previously when a ClientHello arrives with a valid cookie using
DTLSv1_listen() we only "peeked" at the message and left it on the
underlying fd. This works fine for single threaded applications but for
multi-threaded apps this does not work since the fd is typically reused for
the server thread, while a new fd is created and connected for the client.
By "peeking" we leave the message on the server fd, and consequently we
think we've received another valid ClientHello and so we create yet another
fd for the client, and so on until we run out of fds.
In this new approach we remove the ClientHello and buffer it in the SSL
object.
Fixes #6934
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7375)
(cherry picked from commit
079ef6bd534d2f708d8013cfcd8ea0d2f600c788)
Matt Caswell [Mon, 8 Oct 2018 14:46:51 +0000 (15:46 +0100)]
Use the read and write buffers in DTLSv1_listen()
Rather than using init_buf we use the record layer read and write buffers
in DTLSv1_listen(). These seem more appropriate anyway and will help with
the next commit.
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7375)
(cherry picked from commit
2fc4c77c3f06443f4c476f6f58d83e5e108d1dce)
Matt Caswell [Thu, 18 Oct 2018 09:12:20 +0000 (10:12 +0100)]
Test DTLS cookie generation and verification
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7431)
(cherry picked from commit
edcd29efd32c51f298ad5ab438e2d4cc5411e9a9)
Matt Caswell [Thu, 18 Oct 2018 09:12:07 +0000 (10:12 +0100)]
Fix a DTLS memory leak
Fixes #7428
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7431)
(cherry picked from commit
01666a8c1db3ecfb999e1a8f2c5436d114f95681)
Andy Polyakov [Sun, 14 Oct 2018 13:19:41 +0000 (15:19 +0200)]
Configurations/15-android.conf: add support for "standalone toolchain".
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7400)
(cherry picked from commit
03ad7c009e16a233c733098db3169c560142ccd3)
Andy Polyakov [Wed, 17 Oct 2018 08:09:33 +0000 (10:09 +0200)]
arch/async_posix.h: improve portability.
{make|swap|get|set}context are removed in POSIX.1-2008, but glibc
apparently keeps providing it.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7420)
(cherry picked from commit
9d71a24ebf57e7157888af1ca587eafe914bf96f)
armfazh [Thu, 18 Oct 2018 22:26:58 +0000 (08:26 +1000)]
Fix tls_cbc_digest_record is slow using SHA-384 and short messages
The formula used for this is now
kVarianceBlocks = ((255 + 1 + md_size + md_block_size - 1) / md_block_size) + 1
Notice that md_block_size=64 for SHA256, which results on the
magic constant kVarianceBlocks = 6.
However, md_block_size=128 for SHA384 leading to kVarianceBlocks = 4.
CLA:trivial
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7342)
(cherry picked from commit
cb8164b05e3bad5586c2a109bbdbab1ad65a1a6f)
Viktor Dukhovni [Mon, 8 Oct 2018 16:05:14 +0000 (12:05 -0400)]
Apply self-imposed path length also to root CAs
Also, some readers of the code find starting the count at 1 for EE
cert confusing (since RFC5280 counts only non-self-issued intermediate
CAs, but we also counted the leaf). Therefore, never count the EE
cert, and adjust the path length comparison accordinly. This may
be more clear to the reader.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit
dc5831da59e9bfad61ba425d886a0b06ac160cd6)
Viktor Dukhovni [Fri, 5 Oct 2018 03:53:01 +0000 (23:53 -0400)]
Only CA certificates can be self-issued
At the bottom of https://tools.ietf.org/html/rfc5280#page-12 and
top of https://tools.ietf.org/html/rfc5280#page-13 (last paragraph
of above https://tools.ietf.org/html/rfc5280#section-3.3), we see:
This specification covers two classes of certificates: CA
certificates and end entity certificates. CA certificates may be
further divided into three classes: cross-certificates, self-issued
certificates, and self-signed certificates. Cross-certificates are
CA certificates in which the issuer and subject are different
entities. Cross-certificates describe a trust relationship between
the two CAs. Self-issued certificates are CA certificates in which
the issuer and subject are the same entity. Self-issued certificates
are generated to support changes in policy or operations. Self-
signed certificates are self-issued certificates where the digital
signature may be verified by the public key bound into the
certificate. Self-signed certificates are used to convey a public
key for use to begin certification paths. End entity certificates
are issued to subjects that are not authorized to issue certificates.
that the term "self-issued" is only applicable to CAs, not end-entity
certificates. In https://tools.ietf.org/html/rfc5280#section-4.2.1.9
the description of path length constraints says:
The pathLenConstraint field is meaningful only if the cA boolean is
asserted and the key usage extension, if present, asserts the
keyCertSign bit (Section 4.2.1.3). In this case, it gives the
maximum number of non-self-issued intermediate certificates that may
follow this certificate in a valid certification path. (Note: The
last certificate in the certification path is not an intermediate
certificate, and is not included in this limit. Usually, the last
certificate is an end entity certificate, but it can be a CA
certificate.)
This makes it clear that exclusion of self-issued certificates from
the path length count applies only to some *intermediate* CA
certificates. A leaf certificate whether it has identical issuer
and subject or whether it is a CA or not is never part of the
intermediate certificate count. The handling of all leaf certificates
must be the same, in the case of our code to post-increment the
path count by 1, so that we ultimately reach a non-self-issued
intermediate it will be the first one (not zeroth) in the chain
of intermediates.
Reviewed-by: Matt Caswell <matt@openssl.org>
(cherry picked from commit
ed422a2d0196ada0f5c1b6e296f4a4e5ed69577f)
Antoine Salon [Mon, 1 Oct 2018 21:11:57 +0000 (14:11 -0700)]
EVP module documentation pass
Replace ECDH_KDF_X9_62() with internal ecdh_KDF_X9_63()
Signed-off-by: Antoine Salon <asalon@vmware.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7345)
(cherry picked from commit
ffd89124bdfc9e69349492c3f15383bb35520a11)
Dr. Matthias St. Pierre [Tue, 16 Oct 2018 21:50:16 +0000 (23:50 +0200)]
Fix: 'openssl ca' command crashes when used with 'rand_serial' option
Commit
ffb46830e2df introduced the 'rand_serial' option. When it is used,
the 'serialfile' does not get initialized, i.e. it remains a NULL pointer.
This causes a crash when the NULL pointer is passed to the rotate_serial()
call.
This commit fixes the crash and unifies the pointer checking before
calling the rotate_serial() and save_serial() commands.
Fixes #7412
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7417)
(cherry picked from commit
aeec793b4bee929cef8ae35ec4b5a783a6e1d7ed)
Richard Levitte [Mon, 15 Oct 2018 15:38:26 +0000 (17:38 +0200)]
Build file templates: look at *all* defines
When looking at configured macro definitions, we must look at both
what comes from the config target AND what comes from user
configuration.
Fixes #7396
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
(Merged from https://github.com/openssl/openssl/pull/7402)
(cherry picked from commit
92ebf6c4c21ff4b41ba1fd69af74b2039e138114)
Mansour Ahmadi [Mon, 15 Oct 2018 19:11:24 +0000 (15:11 -0400)]
Add a missing check on s->s3->tmp.pkey
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7405)
(cherry picked from commit
61bef9bde09dc6099a7c59baa79898e3b003fec3)
cclauss [Tue, 16 Oct 2018 04:57:41 +0000 (06:57 +0200)]
print() is a function in Python 3
CLA: trivial
Discovered via #7410 @ https://travis-ci.org/openssl/openssl/jobs/
442003489#L440
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/7403)
(cherry picked from commit
83e4533a71c5c78278e9763552a5e5f1806473ee)
Dr. Matthias St. Pierre [Tue, 9 Oct 2018 23:53:29 +0000 (01:53 +0200)]
DRBG: fix reseeding via RAND_add()/RAND_seed() with large input
In pull request #4328 the seeding of the DRBG via RAND_add()/RAND_seed()
was implemented by buffering the data in a random pool where it is
picked up later by the rand_drbg_get_entropy() callback. This buffer
was limited to the size of 4096 bytes.
When a larger input was added via RAND_add() or RAND_seed() to the DRBG,
the reseeding failed, but the error returned by the DRBG was ignored
by the two calling functions, which both don't return an error code.
As a consequence, the data provided by the application was effectively
ignored.
This commit fixes the problem by a more efficient implementation which
does not copy the data in memory and by raising the buffer the size limit
to INT32_MAX (2 gigabytes). This is less than the NIST limit of 2^35 bits
but it was chosen intentionally to avoid platform dependent problems
like integer sizes and/or signed/unsigned conversion.
Additionally, the DRBG is now less permissive on errors: In addition to
pushing a message to the openssl error stack, it enters the error state,
which forces a reinstantiation on next call.
Thanks go to Dr. Falko Strenzke for reporting this issue to the
openssl-security mailing list. After internal discussion the issue
has been categorized as not being security relevant, because the DRBG
reseeds automatically and is fully functional even without additional
randomness provided by the application.
Fixes #7381
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7382)
(cherry picked from commit
3064b55134434a0b2850f07eff57120f35bb269a)
Matt Caswell [Mon, 8 Oct 2018 11:16:22 +0000 (12:16 +0100)]
Fix no-engine
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7365)
(cherry picked from commit
5f9f67b9d494e26941aa8d66d28a6a993c557643)
Pauli [Sun, 7 Oct 2018 21:23:44 +0000 (07:23 +1000)]
Indentation fixes.
The PR #7329 left some indentation slightly off. This fixes it.
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7360)
(cherry picked from commit
5b639d4cb3b9a33536e2ebadf6a03149ea26ba32)
Mykola Baibuz [Sun, 7 Oct 2018 21:14:08 +0000 (07:14 +1000)]
Remove useless check.
Hash can be longer than EC group degree and it will be truncated.
CLA: trivial
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7329)
(cherry picked from commit
b770a80f6d0b08659cd03f26388b45512adb84f3)
Matt Caswell [Mon, 24 Sep 2018 11:00:10 +0000 (12:00 +0100)]
Fix no-psk
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7306)
(cherry picked from commit
734af93a278a7a06710167219e1f05e525c9dd49)
Matt Caswell [Mon, 24 Sep 2018 11:20:45 +0000 (12:20 +0100)]
Fix no-tls1_2
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7308)
(cherry picked from commit
7f1d923aa9dc55dd23a7741e4341ec421c683941)
Mykola Baibuz [Thu, 11 Oct 2018 04:07:26 +0000 (12:07 +0800)]
Safer memory cleanup in (crypto/rsa/rsa_lib.c)
We don't need to use secure clean for public key.
CLA: trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
(Merged from https://github.com/openssl/openssl/pull/7363)
(cherry picked from commit
c033101db39c93cf41d80dfee4357f2617ede1a0)
Tomas Mraz [Tue, 9 Oct 2018 16:37:10 +0000 (18:37 +0200)]
Fix copy&paste error found in Coverity scan
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7377)
(cherry picked from commit
628ee796389b555ddb5fc28355e16e9417ab1724)
Andy Polyakov [Wed, 5 Sep 2018 12:33:21 +0000 (14:33 +0200)]
rsa/rsa_ossl.c: fix and extend commentary [skip ci].
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
(Merged from https://github.com/openssl/openssl/pull/7123)
(cherry picked from commit
d1c008f66bad435b18aa45aa59f72bed7c682849)
Andy Polyakov [Sun, 2 Sep 2018 11:07:58 +0000 (13:07 +0200)]
ssl/s3_enc.c: fix logical errors in ssl3_final_finish_mac.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/7085)
(cherry picked from commit
7d0effeacbb50b12bfc24df7614d7cf5c8686f51)
Andy Polyakov [Mon, 17 Sep 2018 10:36:37 +0000 (12:36 +0200)]
sha/asm/keccak1600-s390x.pl: resolve -march=z900 portability issue.
Negative displacement in memory references was not originally specified,
so that for maximum coverage one should abstain from it, just like with
any other extension. [Unless it's guarded by run-time switch, but there
is no switch in keccak1600-s390x.]
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7239)
(cherry picked from commit
fc97c882f443060dffd8eb56a6b8784e52096c86)
Matt Caswell [Thu, 11 Oct 2018 10:59:57 +0000 (11:59 +0100)]
Fix a typo in a macro
Fixes #7385
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7385)
(cherry picked from commit
990fe909949a58398b3a0cbbdc52b9bbb9cefaa0)
Paul Yang [Mon, 8 Oct 2018 08:36:49 +0000 (16:36 +0800)]
Fix compiling warnings in example code
The example code in EVP_DigestInit.pod generates warnings if users try
to compile it.
[skip ci]
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7362)
(cherry picked from commit
19ac1bf2de07214ee7ee6d2e118fa3aa8e5850f3)
FdaSilvaYY [Fri, 15 Sep 2017 19:14:34 +0000 (21:14 +0200)]
crypto/rand: fix some style nit's
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7378)
(cherry picked from commit
c2e33a05b1eb9dda988aebdeaa529973d7c22142)
Dr. Matthias St. Pierre [Wed, 10 Oct 2018 00:31:37 +0000 (02:31 +0200)]
rand_unix.c: fix --with-rand-seed=none build
Fixes a compiler warning about an unused syscall_random()
and cleans up the OPENSSL_RAND_SEED preprocessor logic.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/779)
(cherry picked from commit
d90e128be6e584d319931c78cb8f8f68d17b6a34)
Paul Yang [Mon, 8 Oct 2018 09:04:14 +0000 (17:04 +0800)]
Fix a nit of copyright date range
Should be 2018 instead of 20018.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7364)
Benjamin Kaduk [Thu, 4 Oct 2018 18:49:21 +0000 (13:49 -0500)]
apps: allow empty attribute values with -subj
Historically (i.e., OpenSSL 1.0.x), the openssl applications would
allow for empty subject attributes to be passed via the -subj argument,
e.g., `opensl req -subj '/CN=joe/O=/OU=local' ...`. Commit
db4c08f0194d58c6192f0d8311bf3f20e251cf4f applied a badly needed rewrite
to the parse_name() helper function that parses these strings, but
in the process dropped a check that would skip attributes with no
associated value. As a result, such strings are now treated as
hard errors and the operation fails.
Restore the check to skip empty attribute values and restore
the historical behavior.
Document the behavior for empty subject attribute values in the
corresponding applications' manual pages.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/7349)
(cherry picked from commit
3d362f190306b62a17aa2fd475b2bc8b3faa8142)