oweals/u-boot.git
6 years agoPrepare v2018.01-rc2 v2018.01-rc2
Tom Rini [Tue, 19 Dec 2017 01:55:17 +0000 (20:55 -0500)]
Prepare v2018.01-rc2

Signed-off-by: Tom Rini <trini@konsulko.com>
6 years agoconfigs: Resync with savedefconfig
Tom Rini [Tue, 19 Dec 2017 01:19:09 +0000 (20:19 -0500)]
configs: Resync with savedefconfig

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
6 years agoMerge git://git.denx.de/u-boot-rockchip
Tom Rini [Mon, 18 Dec 2017 23:39:18 +0000 (18:39 -0500)]
Merge git://git.denx.de/u-boot-rockchip

6 years agoMerge git://git.denx.de/u-boot-fsl-qoriq
Tom Rini [Mon, 18 Dec 2017 23:39:00 +0000 (18:39 -0500)]
Merge git://git.denx.de/u-boot-fsl-qoriq

6 years agocommon: image.c: Fix CACHE: Misaligned operation output
Heiko Schocher [Thu, 14 Dec 2017 10:19:22 +0000 (11:19 +0100)]
common: image.c: Fix CACHE: Misaligned operation output

When booting a itb file with a Ramdisk on a imx6 based
board, U-Boot drops the warning:

Loading Kernel Image ... OK
Loading Ramdisk to 4ecf1000, end 4ef8b11f ... \
CACHE: Misaligned operation at range [4ecf1000,  4ef8b11f]

Fix it!

Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Ayoub Zaki <hs@denx.de>
6 years agoam335x_evm: Fix DFU for eMMC
Sam Protsenko [Tue, 12 Dec 2017 18:07:41 +0000 (20:07 +0200)]
am335x_evm: Fix DFU for eMMC

Use dfu_alt_info_emmc variable from include/environment/ti/dfu.h file.
It was probably overlooked when extracting DFU variables to mentioned
file.

This patch fixes DFU on BeagleBone Black, so that we can use commands
like ones below to upgrade various images on eMMC:

    => setenv dfu_alt_info $dfu_alt_info_emmc
    => dfu 0 mmc 1

    $ dfu-util -D MLO -a MLO.raw
    $ dfu-util -D u-boot.img -a u-boot.img.raw

Without this patch, the  user is forced to assign the value to
dfu_alt_info_emmc manually, which contradicts with instructions [1].

[1] http://processors.wiki.ti.com/index.php/Linux_Core_U-Boot_User%27s_Guide

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
6 years agonet: phy: meson-gxl: detect LPA corruption
Jerome Brunet [Tue, 12 Dec 2017 15:03:55 +0000 (16:03 +0100)]
net: phy: meson-gxl: detect LPA corruption

This patch is ported from the Linux patch posted at [1] and applied to
net tree as commit f1e2400a80ff.

The purpose of this change is to fix the incorrect detection of the link
partner (LP) advertised capabilities which sometimes happens with this PHY
(roughly 1 time in a dozen)

This issue may cause the link to be negotiated at 10Mbps/Full or
10Mbps/Half when 100MBps/Full is actually possible. In some case, the link
is even completely broken and no communication is possible.

To detect the corruption, we must look for a magic undocumented bit in the
WOL bank (hint given by the SoC vendor kernel) but this is not enough to
cover all cases. We also have to look at the LPA ack. If the LP supports
Aneg but did not ack our base code when aneg is completed, we assume
something went wrong.

The detection of a corrupted LPA triggers a restart of the aneg process.
This solves the problem but may take up to 6 retries to complete.

[1] https://lkml.kernel.org/r/20171208110811.30789-1-jbrunet@baylibre.com

Fixes: 8995a96d1d67 ("net: phy: Add Amlogic Meson GXL Internal PHY support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
6 years agoARM: arch-meson: fix writel arguments order
Hans Verkuil [Tue, 12 Dec 2017 13:23:39 +0000 (14:23 +0100)]
ARM: arch-meson: fix writel arguments order

Using writel causes a "Synchronous Abort". Invert the arguments.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
6 years agoMerge tag 'xilinx-for-v2018.01-rc2-v2' of git://www.denx.de/git/u-boot-microblaze
Tom Rini [Mon, 18 Dec 2017 17:23:27 +0000 (12:23 -0500)]
Merge tag 'xilinx-for-v2018.01-rc2-v2' of git://denx.de/git/u-boot-microblaze

Xilinx changes for v2018.01-rc2-v2

fpga:
- Enable loading bitstream via fit image for !xilinx platforms

zynq:
- Fix SPL SD boot mode

zynqmp:
- Not not reset in panic
- Do not use simple allocator because of fat changes
- Various dt chagnes
- modeboot variable setup
- Fix fpga loading on automotive devices
- Fix coverity issues

test:
- Fix env test for !hush case - Stephen's patch

6 years agoarmv8: ls1046aqds: Adjust IFC timing for NOR flash
York Sun [Mon, 11 Dec 2017 16:39:05 +0000 (08:39 -0800)]
armv8: ls1046aqds: Adjust IFC timing for NOR flash

Increase setup, assertion and hold time related to chip-select signal.
Additional delay is needed for the signal to propogate through FPGA.
This adjustment slightly increase the read and write cycle but has no
impact on burst read or write.

Signed-off-by: York Sun <york.sun@nxp.com>
6 years agoarmv8: ls2085a: Update README file for NAND boot
York Sun [Thu, 7 Dec 2017 22:37:40 +0000 (14:37 -0800)]
armv8: ls2085a: Update README file for NAND boot

Update README file to note LS2088A and LS1088A don't support booting
from NAND flash.

Signed-off-by: York Sun <york.sun@nxp.com>
6 years agoarmv8: ls2080a: Increase load image len for NAND boot
York Sun [Mon, 18 Dec 2017 16:24:55 +0000 (08:24 -0800)]
armv8: ls2080a: Increase load image len for NAND boot

Again the image size increases and the length needs to be adjusted.

Signed-off-by: York Sun <york.sun@nxp.com>
6 years agorockchip: add a common script for generate fit its
Kever Yang [Fri, 15 Dec 2017 03:15:03 +0000 (11:15 +0800)]
rockchip: add a common script for generate fit its

Rockchip release bl31.elf file for armv8 SoCs like rk3399, rk3328,
the elf have more than one section, we need to decode it first and
packed them into u-boot.itb with its file. This script is to generate
the its script.
Need default bl31.elf in root directory of U-Boot source and dtb
as parameter.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agorockchip: firefly-rk3399: add FIT for rk3399
Kever Yang [Fri, 15 Dec 2017 03:15:04 +0000 (11:15 +0800)]
rockchip: firefly-rk3399: add FIT for rk3399

Enable SPL_FIT_GENERATOR with path for it.
With this patch you can get u-boot.itb for rk3399-firefly with:
> make u-boot.itb

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Mark Kettenis <kettenis@openbsd.org>
Tested-by: Mark Kettenis <kettenis@openbsd.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agorockchip: evb-rk3399: update document for board bring up
Kever Yang [Fri, 15 Dec 2017 03:15:05 +0000 (11:15 +0800)]
rockchip: evb-rk3399: update document for board bring up

Since we support ATF in SPL and add script for it, let's make the
document up to date.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agorockchip: update ROCKCHIP_SPL_RESERVE_IRAM to 0
Kever Yang [Mon, 18 Dec 2017 07:13:19 +0000 (15:13 +0800)]
rockchip: update ROCKCHIP_SPL_RESERVE_IRAM to 0

Only rk3399 atf need ROCKCHIP_SPL_RESERVE_IRAM. This commit updates
its default setting to 0 so that other SoCs do not need to define it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agorockchip: update boot0 hook
Kever Yang [Mon, 18 Dec 2017 07:05:41 +0000 (15:05 +0800)]
rockchip: update boot0 hook

Rockchip SoCs only need boot0 hook at SPL, and the U-Boot proper do not
need it.

The very beginning of U-Boot proper is different between armv7 and armv8:
armv7 start with ARM_VECTORS while armv8 start with 'b reset'.

Here is the map of very beginning for all cases:
armv7 SPL: TAG(overwrite 'b 1f')+'b reset' + ARM_VECTORS
armv7 U-Boot: ARM_VECTORS
armv8 SPL: TAG(overwrite 'b 1f')+'b reset' + Reserved_iram(rk3399)
armv8 U-Boot: 'b reset'

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agotest/py: Setup variables based on HUSH selection
Stephen Warren [Fri, 10 Nov 2017 10:59:15 +0000 (11:59 +0100)]
test/py: Setup variables based on HUSH selection

After adding our small zynq uboot which has hush parser off same
variable tests start to failed. Use quotes only when hush is enabled.

Reported-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
6 years agoarm64: zynqmp: Access timestamp_ref_ctrl register only if running in el3
Siva Durga Prasad Paladugu [Thu, 7 Dec 2017 09:35:30 +0000 (15:05 +0530)]
arm64: zynqmp: Access timestamp_ref_ctrl register only if running in el3

Access the timestamp ref ctrl register only if runinng
at el3 level otherwise just return. This change fixes
the issue when CRL APB is marked as secure and accessing
when not in el3 causes exception.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agotools: zynqmpimage: Check return values from file functions
Michal Simek [Tue, 5 Dec 2017 14:42:25 +0000 (15:42 +0100)]
tools: zynqmpimage: Check return values from file functions

Check all return values from file functions.
In case of negative return exit immediately.
Also change fsize return value which can't be negative.

Reported-by: Coverity (CID: 23276, 23304, 169357)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Dont use 4K sector erase by default for spi-flashes
Siva Durga Prasad Paladugu [Tue, 31 Jan 2017 05:14:06 +0000 (10:44 +0530)]
arm64: zynqmp: Dont use 4K sector erase by default for spi-flashes

Dont use 4K sector erase by default, Disabling this
would use 64K sector erase and decreases erase time.
Also disabled by the fact that UBIFS and JFFS2 won't work
with 4K sector erase.

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Enable spi flashes
Michal Simek [Fri, 8 Dec 2017 14:18:05 +0000 (15:18 +0100)]
arm64: zynqmp: Enable spi flashes

Enabling all spi flashes because some of these boards can have different
flashes compared to public version.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agorockchip: move CONFIG_ENV_SIZE and CONFIG_ENV_OFFSET to Kconfig
Klaus Goger [Mon, 11 Dec 2017 16:56:08 +0000 (17:56 +0100)]
rockchip: move CONFIG_ENV_SIZE and CONFIG_ENV_OFFSET to Kconfig

This commit adds ENV_SIZE and ENV_OFFSET configuration items for
ARCH_ROCKCHIP, but keeps these non-visible (i.e. not prompt is given).
With these new items present, the configuration from the header files
is moved to Kconfig.

Keeping these non-visible is necessary to have the possibility to
select new default values if CONFIG_IS_IN_* is changed (interactively
or with oldconfig). Otherwise it will always be set to a previous
value if used with a prompt.  As an example if we do a defconfig with
CONFIG_IS_IN_MMC and change it to CONFIG_IS_IN_SPI_FLASH via
menuconfig, ENV_SIZE and ENV_OFFSET will not be changed to the correct
values as defconfig will already have set them to the default values
of CONFIG_IS_IN_MMC in .config.

Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agoMerge tag 'signed-efi-v2018.01' of git://github.com/agraf/u-boot
Tom Rini [Sun, 17 Dec 2017 20:37:29 +0000 (15:37 -0500)]
Merge tag 'signed-efi-v2018.01' of git://github.com/agraf/u-boot

Patch queue for efi - 2017-12-17

A few fixes for 2018.01:

  - Compile fix with helloworld example
  - DP match fix (fixes FreeBSD loader and grub on block storage)
  - More DP fixes for SD, block
  - Fix use-after-free

6 years agorockchip: rk3399-puma: set gpio4cd iodomain to 1.8V
Jakob Unterwurzacher [Fri, 15 Dec 2017 15:23:14 +0000 (16:23 +0100)]
rockchip: rk3399-puma: set gpio4cd iodomain to 1.8V

The PCIe reset signal is connected to GPIO4_C6 on the Puma
module. This pin is supplied by 1.8V, but the default iodomain
setting is 3.0V and in this situation the pin is unable to go
high.

Linux assumes that this signal works in early boot
as PCIe is probed before loading the iodomain driver.

Make PCIe work in Linux by setting the gpio4cd iodomain to 1.8V.

Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agorockchip: config: update part table
Kever Yang [Tue, 31 Oct 2017 08:52:23 +0000 (16:52 +0800)]
rockchip: config: update part table

User do not need to access the reserved part in system, remove them
from partition table.
Rename atf to trust as generic name for armv7 do not use ATF.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
6 years agoefi_loader: comments for dp_part_fill()
Heinrich Schuchardt [Mon, 11 Dec 2017 11:56:42 +0000 (12:56 +0100)]
efi_loader: comments for dp_part_fill()

Add a description for dp_part_fill().
Reword a comment in the function.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: correct DeviceNodeToText for media types
Heinrich Schuchardt [Mon, 11 Dec 2017 11:56:41 +0000 (12:56 +0100)]
efi_loader: correct DeviceNodeToText for media types

When converting device nodes and paths to text we should
stick to the UEFI spec.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: correctly setup device paths for block devices
Heinrich Schuchardt [Mon, 11 Dec 2017 11:56:40 +0000 (12:56 +0100)]
efi_loader: correctly setup device paths for block devices

According to the UEFI spec the numbering of partitions has to
start with 1.

Partion number 0 is reserved for the optional device path for
the complete block device.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: correctly determine if an MMC device is an SD-card
Heinrich Schuchardt [Mon, 11 Dec 2017 11:56:39 +0000 (12:56 +0100)]
efi_loader: correctly determine if an MMC device is an SD-card

The SD cards and eMMC devices have different device nodes.
The current coding interpretes all MMC devices as eMMC.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: error handling in efi_load_image()
Heinrich Schuchardt [Mon, 4 Dec 2017 17:03:03 +0000 (18:03 +0100)]
efi_loader: error handling in efi_load_image()

If a failure occurs when trying to load an image, it is insufficient
to free() the EFI object. We must remove it from the object list,
too. Otherwise a use after free will occur the next time we
iterate over the object list.

Furthermore errors in setting up the image should be handled.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: new function efi_delete_handle()
Heinrich Schuchardt [Mon, 4 Dec 2017 17:03:02 +0000 (18:03 +0100)]
efi_loader: new function efi_delete_handle()

Provide a function to remove a handle from the object list
after removing all protocols.

To avoid forward declarations other functions have to move up
in the coding.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: return status from efi_setup_loaded_image()
Heinrich Schuchardt [Mon, 4 Dec 2017 17:03:01 +0000 (18:03 +0100)]
efi_loader: return status from efi_setup_loaded_image()

efi_setup_loaded_image() should return an error code indicating if
an error has occurred.

An error occurs if a protocol cannot be installed.

Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: Ensure efi_dp_find_obj() finds exact matches
Alexander Graf [Mon, 11 Dec 2017 13:29:46 +0000 (14:29 +0100)]
efi_loader: Ensure efi_dp_find_obj() finds exact matches

When calling efi_dp_find_obj(), we usually want to find the *exact* match
of an object for a given device path. However, I ran into a nasty corner case
where I had the following objects with paths available:

Handle 0x9feffa70
  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/EndEntire
Handle 0x9feffb58
  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/HD(1,800,32000,2de808cb00000000,1,1)/EndEntire

and was searching for

  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/HD(1,800,32000,2de808cb00000000,1,1)/EndEntire

But because our device path search looked for any substring match, it would
return

  /HardwareVendor(e61d73b9-a384-4acc-aeab-82e828f3628b)[0: ]/USB(6,0)/EndEntire

because that path is a full substring of the path we were searching for.

So this patch adapts the device path search logic to always look for exact
matches first. The way we distinguish between those cases is by looking at
whether our caller actually deals with remainders.

As a side effect, the code as is from all I can tell now never does a
substring match anymore, because it always gets called with rem=NULL, so
we always only do exact matches now.

Reported-by: Jonathan Gray <jsg@jsg.id.au>
Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: helloworld.c: Reduce file size
Alexander Graf [Mon, 11 Dec 2017 08:45:30 +0000 (09:45 +0100)]
efi_loader: helloworld.c: Reduce file size

The efi linker script includes sections needed for the dynamic linker.
However, in our EFI application environment we don't have a dynamic linker.

So let's remove them. That way we save on 4k padding and reduce the file
size of the hello world efi binary from ~4k to ~1k.

Signed-off-by: Alexander Graf <agraf@suse.de>
6 years agoefi_loader: helloworld.c: Explicitly use .rodata for loaded_image_guid
Alexander Graf [Mon, 11 Dec 2017 08:40:47 +0000 (09:40 +0100)]
efi_loader: helloworld.c: Explicitly use .rodata for loaded_image_guid

Commit bbf75dd9345d0b ("efi_loader: output load options in helloworld")
introduced a const variable in efi_main() called loaded_image_guid which
got populated from a constant struct.

While you would usually expect a compiler to realize that this variable
should really just be a global pointer to .rodata, gcc disagrees and instead
puts it on the stack. Unfortunately in some implementations of gcc it does
so my calling memcpy() which we do not implement in our hello world
environment.

So let's explicitly move it to a global variable which in turn puts it in
.rodata reliably and gets rid of the memcpy().

Fixes: bbf75dd9345d0b ("efi_loader: output load options in helloworld")
Reported-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
6 years agoarmv8: ls1012ardb: support hwconfig for eSDHC1 enabling
Yangbo Lu [Fri, 8 Dec 2017 07:35:37 +0000 (15:35 +0800)]
armv8: ls1012ardb: support hwconfig for eSDHC1 enabling

I2C reading for DIP switch setting is not reliable for LS1012ARDB
RevD and later versions. This patch is to add hwconfig support to
enable/disable eSDHC1 manually for these boards. Also drop 'status'
fix-up for eSDHC0 and leave it as it is. It shouldn't always be
fixed up with 'okay'.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoarmv8: ls1012ardb: add more board version information
Yangbo Lu [Fri, 8 Dec 2017 07:35:36 +0000 (15:35 +0800)]
armv8: ls1012ardb: add more board version information

Add LS1012ARDB RevC/RevC1/RevC2/RevD/RevE information and
detect it when u-boot starts up.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoarmv8: ls1012ardb: clean up definitions for I2C IO expanders
Yangbo Lu [Fri, 8 Dec 2017 07:35:35 +0000 (15:35 +0800)]
armv8: ls1012ardb: clean up definitions for I2C IO expanders

This patch is to clean up definitions for I2C IO expanders.
The value 0x10 of __SW_BOOT_EMU is wrong. It should be 0x2.
Fixed it in this patch.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoboard/ls2080a, ls1088a: Add check for mc-dpl applied in fdt
Yogesh Gaur [Thu, 7 Dec 2017 05:40:14 +0000 (11:10 +0530)]
board/ls2080a, ls1088a: Add check for mc-dpl applied in fdt

Function fdt_fixup_board_enet() performs fdt fixup. Only return
fdt_status_okay() when both MC is applied and DPL is deployed, else
return fdt_status_fail().

This check is added to LS1088A/LS2080A/LS2088A boards.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoMerge git://git.denx.de/u-boot-dm
Tom Rini [Thu, 14 Dec 2017 20:46:07 +0000 (15:46 -0500)]
Merge git://git.denx.de/u-boot-dm

6 years agoarm64: zynqmp: Enable fpga bitstream loading
Michal Simek [Fri, 8 Dec 2017 14:03:26 +0000 (15:03 +0100)]
arm64: zynqmp: Enable fpga bitstream loading

Enable fpga loadb and loadbp for zynqmp platforms.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Enable SPL ram support
Michal Simek [Fri, 8 Dec 2017 14:01:19 +0000 (15:01 +0100)]
arm64: zynqmp: Enable SPL ram support

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Enable misc devices
Michal Simek [Fri, 8 Dec 2017 13:46:30 +0000 (14:46 +0100)]
arm64: zynqmp: Enable misc devices

Enable misc devices for zynqmp targets.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Add support for zynqmp automotive silicons
Michal Simek [Wed, 6 Dec 2017 07:33:50 +0000 (08:33 +0100)]
arm64: zynqmp: Add support for zynqmp automotive silicons

Remove silicon prefix. Automotive grade devices are using xazu instead
of xczu prefix.

The patch "fpga: xilinx: Check for substring in device ID validation"
(sha1: f72132673a01216e760864e442f168977cce2bd2)
enables this functionality for zynq devices that only substrings are
checked.
Unfortunately there is no way how to detect device grade that's why
this change is reasonable.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Add missing zynq_board_read_rom_ethaddr() prototype
Michal Simek [Mon, 31 Jul 2017 08:37:09 +0000 (10:37 +0200)]
arm64: zynqmp: Add missing zynq_board_read_rom_ethaddr() prototype

Add missing zynq_board_read_rom_ethaddr() prototype reported by sparse.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Joe Hershberger <joe.hershberger@ni.com>
6 years agoarm64: zynqmp: Use only earlycon bootargs instead of full one
Michal Simek [Mon, 27 Feb 2017 07:11:38 +0000 (08:11 +0100)]
arm64: zynqmp: Use only earlycon bootargs instead of full one

This is the same patch as was done earlier.
Please look at Linux patch:
"arm64: zynqmp: Use only earlycon bootargs instead of full one"
(sha1: f3609c8d4af28b9cc22ca49bf8e529b582ec188c)

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Remove undocumented dma properties
Michal Simek [Mon, 30 Oct 2017 08:46:52 +0000 (09:46 +0100)]
arm64: zynqmp: Remove undocumented dma properties

Remove overfetch, ratectrl, include-sg and src-issue dma properties.
Driver is not using them and they are also not documented in the binding
doc.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Acked-by: Kedareswara rao Appana <appanad@xilinx.com>
6 years agoarm64: zynqmp: Add generic compatible string for I2C EEPROM
Javier Martinez Canillas [Thu, 15 Jun 2017 18:54:13 +0000 (20:54 +0200)]
arm64: zynqmp: Add generic compatible string for I2C EEPROM

The at24 driver allows to register I2C EEPROM chips using different vendor
and devices, but the I2C subsystem does not take the vendor into account
when matching using the I2C table since it only has device entries.

But when matching using an OF table, both the vendor and device has to be
taken into account so the driver defines only a set of compatible strings
using the "atmel" vendor as a generic fallback for compatible I2C devices.

So add this generic fallback to the device node compatible string to make
the device to match the driver using the OF device ID table.

Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Enable clock command for all boards
Michal Simek [Fri, 1 Dec 2017 14:35:43 +0000 (15:35 +0100)]
arm64: zynqmp: Enable clock command for all boards

clk command provides an option to see actual clock setting.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Enable phys for zcu102
Michal Simek [Fri, 1 Dec 2017 14:50:31 +0000 (15:50 +0100)]
arm64: zynqmp: Enable phys for zcu102

Enable USB3.0 and SATA phy for zcu102 boards.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Setup modeboot variable based on bootmode
Michal Simek [Fri, 1 Dec 2017 14:18:24 +0000 (15:18 +0100)]
arm64: zynqmp: Setup modeboot variable based on bootmode

Setup bootmode variable based on bootmode selection.
This is helping with setting up boot method.
Also setup sdbootdevice.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Read boot mode register using zynqmp_mmio_read
Siva Durga Prasad Paladugu [Tue, 21 Feb 2017 12:28:28 +0000 (17:58 +0530)]
arm64: zynqmp: Read boot mode register using zynqmp_mmio_read

Dont read boot mode register directly read it using
zynqmp_mmio_read().

Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Enable SPL_CLK when SPL is enabled
Michal Simek [Fri, 1 Dec 2017 14:13:36 +0000 (15:13 +0100)]
arm64: zynqmp: Enable SPL_CLK when SPL is enabled

Setup proper dependency in Kconfig for SPL_CLK.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Add support for generic QSPI boot
Michal Simek [Mon, 16 Jan 2017 11:07:33 +0000 (12:07 +0100)]
arm64: zynqmp: Add support for generic QSPI boot

This patch is enabling support for SPL QSPI boot.

First of all it is necessary to generate atf-spi.ub which is different
format than atf-uboot.ub (this can be made as legacy image too)

ADDR=`arm-xilinx-linux-gnueabi-readelf -a bl31.elf | grep "Entry point
address" | cut -d ':' -f 2 | sed -e 's/^[ \t]*//'`
aarch64-linux-gnu-objcopy -O binary bl31.elf bl31.bin
./tools/mkimage -f auto -A arm64 -T firmware -C none -O u-boot -a $ADDR
-e $ADDR -n "atf1" -E -b arch/arm/dts/zynqmp-zcu102.dtb -d bl31.bin
atf-uboot.ub
./tools/mkimage -A arm64 -T firmware -C none -O u-boot -a $ADDR -e $ADDR
-n "atf-for-qspi" -E -d bl31.bin atf-spi.ub

This patch is using this QSPI layout with offsets:
0 boot.bin
512k atf-ub
640k u-boot.bin
1280k u-boot.img

Which corresponding by writing these images(read from MMC)
mmcinfo
sf probe
load mmc 0 10000000 boot.bin
sf erase 0 +$filesize
sf write 10000000 0 $filesize
load mmc 0 10000000 atf-spi.ub
sf erase 0x80000 +$filesize
sf write 10000000 0x80000 $filesize
load mmc 0 10000000 u-boot.bin
sf erase 0xa0000 +$filesize
sf write 10000000 0xa0000 $filesize
load mmc 0 10000000 u-boot.img
sf erase 0x140000 +$filesize
sf write 10000000 0x140000 $filesize

For testing u-boot running in EL3 you can break atf-spi.ub like this:
sf probe
sf erase 0x80000 +4

Then u-boot.img is executed.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Add reference to pmu firmware node
Michal Simek [Fri, 1 Dec 2017 13:43:05 +0000 (14:43 +0100)]
arm64: zynqmp: Add reference to pmu firmware node

This reference is needed for pinctrl driver where some signals can be
routed directly to platform management unit (PMU).

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Do not use SPL_SYS_MALLOC_SIMPLE allocator
Michal Simek [Fri, 1 Dec 2017 13:34:03 +0000 (14:34 +0100)]
arm64: zynqmp: Do not use SPL_SYS_MALLOC_SIMPLE allocator

This was caused by: "fs/fat: Reduce stack usage"
 (sha1:2460098cffacd18729262e3ed36656e6943783ed) which converted
fat code to use malloc. But simple malloc is not freeing space
that's why full malloc implementation is needed.
Malloc space is added to RAM.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm64: zynqmp: Do not perform reset in case of panic
Michal Simek [Mon, 6 Feb 2017 13:34:01 +0000 (14:34 +0100)]
arm64: zynqmp: Do not perform reset in case of panic

Do not perform reset when panic happens because in the next reset
panic happens again and logs are overflood by the same errors.
This can be enabled by default and reset can be performed via watchdog.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoarm: zynq: Fix SPL SD boot mode
Michal Simek [Fri, 1 Dec 2017 12:50:33 +0000 (13:50 +0100)]
arm: zynq: Fix SPL SD boot mode

This patch is fixing two issues:
1. Insufficient stack size for fat fs buffers
2. Insufficient space in malloc area

Tested on zc702 and zc706.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agofpga: allow programming fpga from FIT image for all FPGA drivers
Goldschmidt Simon [Fri, 10 Nov 2017 14:17:41 +0000 (14:17 +0000)]
fpga: allow programming fpga from FIT image for all FPGA drivers

This drops the limit that fpga is only loaded from FIT images for Xilinx.
This is done by moving the 'partial' check from 'common/image.c' to
'drivers/fpga/xilinx.c' (the only driver supporting partial images yet)
and supplies a weak default implementation in 'drivers/fpga/fpga.c'.

Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (On zcu102)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
6 years agoMerge branch 'master' of git://git.denx.de/u-boot-socfpga
Tom Rini [Wed, 13 Dec 2017 22:58:46 +0000 (17:58 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga

6 years agoMerge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Wed, 13 Dec 2017 22:58:36 +0000 (17:58 -0500)]
Merge branch 'master' of git://git.denx.de/u-boot-usb

6 years agoMerge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh
Tom Rini [Wed, 13 Dec 2017 22:58:27 +0000 (17:58 -0500)]
Merge branch 'rmobile-mx' of git://git.denx.de/u-boot-sh

6 years agoMerge git://git.denx.de/u-boot-samsung
Tom Rini [Wed, 13 Dec 2017 22:58:18 +0000 (17:58 -0500)]
Merge git://git.denx.de/u-boot-samsung

6 years agoarmv8: layerscape: Discard the needless cpu nodes
Wenbin song [Mon, 4 Dec 2017 04:18:29 +0000 (12:18 +0800)]
armv8: layerscape: Discard the needless cpu nodes

Using "cpu_pos_mask()" function to detect the real online cpus,
and discard the needless cpu nodes on kernel dts.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoarmv8: ls1043a/ls2080a: check SoC by device ID
Wenbin song [Mon, 4 Dec 2017 04:18:28 +0000 (12:18 +0800)]
armv8: ls1043a/ls2080a: check SoC by device ID

Check LS1043A/LS2080a by device ID without using personality ID to
determine revision number. This check applies to all various
personalities of the same SoC family.

Signed-off-by: Wenbin Song <wenbin.song@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoarm64: ls1012afrdm: Add distro boot support
Rajesh Bhagat [Thu, 30 Nov 2017 11:14:45 +0000 (16:44 +0530)]
arm64: ls1012afrdm: Add distro boot support

Include common config_distro_defaults.h and config_distro_bootcmd.h
for u-boot enviroments to support automatical distro boot which
scan boot.scr from external storage devices(e.g. SD and USB)
and execute autoboot script.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoarm64: ls1012ardb: Add distro boot support
Rajesh Bhagat [Thu, 30 Nov 2017 11:14:38 +0000 (16:44 +0530)]
arm64: ls1012ardb: Add distro boot support

Include common config_distro_defaults.h and config_distro_bootcmd.h
for u-boot enviroments to support automatical distro boot which
scan boot.scr from external storage devices(e.g. SD and USB)
and execute autoboot script.

Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com>
Signed-off-by: Rajesh Bhagat <rajesh.bhagat@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoarmv8: ls1088ardb: support force SDHC mode by hwconfig
Yangbo Lu [Mon, 27 Nov 2017 07:40:17 +0000 (15:40 +0800)]
armv8: ls1088ardb: support force SDHC mode by hwconfig

The BRDCFG5[SPISDHC] register field of Qixis device is used
to control SPI and SDHC signal routing.

10 = Force SDHC Mode
  - SPI_CS[0] is routed to CPLD for SDHC_VS use.
  - SPI_CS[1] is unused.
  - SPI_CS[2:3] are routed to the TDMRiser slot.

11 = Force eMMC Mode
  - SPI_CS[0:3] are routed to the eMMC card.

0X = Auto Mode
  - If SDHC_CS_B=0 (SDHC card installed): Use SDHC mode
    described above.
  - Else SDHC_CS_B=1 (no SDHC card installed): Use eMMC
    mode described above.

In default the hardware uses auto mode, but sometimes we need
to use force SDHC mode to support SD card hotplug, or SD sleep
waking up in kernel. This patch is to support force SDHC mode
by hwconfig.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agopower: pmic/regulator: Add basic support for TPS65910
Felix Brack [Thu, 30 Nov 2017 12:52:37 +0000 (13:52 +0100)]
power: pmic/regulator: Add basic support for TPS65910

Texas Instrument's TPS65910 PMIC contains 3 buck DC-DC converts, one
boost DC-DC converter and 8 LDOs. This patch implements driver model
support for the TPS65910 PMIC and its regulators making the get/set
API for regulator value/enable available.
This patch depends on the patch "am33xx: Add a function to query MPU
voltage in uV" to build correctly. For boards relying on the DT
include file tps65910.dtsi the v3 patch "power: extend prefix match
to regulator-name property" and an appropriate regulator naming is
also required.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agodm: blk: Use uclass_find_first/next_device() in blk_first/next_device()
Stefan Roese [Wed, 29 Nov 2017 15:46:42 +0000 (16:46 +0100)]
dm: blk: Use uclass_find_first/next_device() in blk_first/next_device()

This patch changes the calls to uclass_first/next_device() in blk_first/
next_device() to use uclass_find_first/next_device() instead. These functions
don't prepare the devices, which is correct in this case.

With this patch applied, the "usb storage" command now works again as
expected:

=> usb storage
  Device 0: Vendor: SanDisk Rev: 1.00 Prod: Ultra
  Type: Removable Hard Disk
  Capacity: 58656.0 MB = 57.2 GB (120127488 x 512)

Without this patch, it used to generate this buggy output:

=> usb storage
Card did not respond to voltage select!
mmc_init: -95, time 26
No storage devices, perhaps not 'usb start'ed..?

Signed-off-by: Stefan Roese <sr@denx.de>
Suggested-by: Simon Glass <sjg@chromium.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agopower: extend prefix match to regulator-name property
Felix Brack [Mon, 27 Nov 2017 08:14:16 +0000 (09:14 +0100)]
power: extend prefix match to regulator-name property

This patch extends pmic_bind_children prefix matching. In addition to
the node name the property regulator-name is used while trying to match
prefixes. This allows assigning different drivers to regulator nodes
named regulator@1 and regulator@10 for example.
I have discarded the idea of using other properties then regulator-name
as I do not see any benefit in using property compatible or even
regulator-compatible. Of course I am open to change this if there are
good reasons to do so.

Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agodm: reset: have the reset-command perform a COLD reset
Philipp Tomsich [Fri, 24 Nov 2017 17:37:58 +0000 (18:37 +0100)]
dm: reset: have the reset-command perform a COLD reset

The DM version of do_reset has been issuing a warm-reset, which (on
some platforms keeps GPIOs and other parts of the platform active).
This may cause unintended behaviour, as calling do_reset usually
indicates a desire to reset the board/platform and not just the CPU.

This changes do_reset to always request a COLD reset.
Note that programmatic uses can still invoke a WARM reset through
reset_cpu() or using sysreset_walk().

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
6 years agobinman: tegra: Convert to use binman
Simon Glass [Tue, 14 Nov 2017 01:55:06 +0000 (18:55 -0700)]
binman: tegra: Convert to use binman

Update tegra to use binman for image creation. This still includes the
current Makefile logic, but a later patch will remove this. Three output
files are created, all of which combine
SPL and U-Boot:

   u-boot-tegra.bin        - standard image
   u-boot-dtb-tegra.bin    - same as u-boot-tegra.bin
   u-boot-nodtb-target.bin - includes U-Boot without the appended device tree

The latter is useful for build systems where the device is appended later,
perhaps after being modified.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Add documentation for the symbol feature
Simon Glass [Tue, 14 Nov 2017 01:55:05 +0000 (18:55 -0700)]
binman: Add documentation for the symbol feature

Add this feature to the README.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
6 years agobinman: Add binman support to spl_ram.c
Simon Glass [Tue, 14 Nov 2017 01:55:04 +0000 (18:55 -0700)]
binman: Add binman support to spl_ram.c

SPL supports reading U-Boot from a RAM location. At present this is
hard-coded to the U-Boot text base address. Use binman to allow this to
come from the image file, if binman is used.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Add binman symbol support to SPL
Simon Glass [Tue, 14 Nov 2017 01:55:03 +0000 (18:55 -0700)]
binman: Add binman symbol support to SPL

Allow SPL to access binman symbols and use this to get the address of
U-Boot. This falls back to CONFIG_SYS_TEXT_BASE if the binman symbol
is not available.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: arm: Include the binman symbol table
Simon Glass [Tue, 14 Nov 2017 01:55:02 +0000 (18:55 -0700)]
binman: arm: Include the binman symbol table

This area of the image contains symbols whose values are filled in by
binman. If this feature is not used, the table is empty.

Add this to the ARM SPL link script.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Support accessing binman tables at run time
Simon Glass [Tue, 14 Nov 2017 01:55:01 +0000 (18:55 -0700)]
binman: Support accessing binman tables at run time

Binman construct images consisting of multiple binary files. These files
sometimes need to know (at run timme) where their peers are located. For
example, SPL may want to know where U-Boot is located in the image, so
that it can jump to U-Boot correctly on boot.

In general the positions where the binaries end up after binman has
finished packing them cannot be known at compile time. One reason for
this is that binman does not know the size of the binaries until
everything is compiled, linked and converted to binaries with objcopy.

To make this work, we add a feature to binman which checks each binary
for symbol names starting with '_binman'. These are then decoded to figure
out which entry and property they refer to. Then binman writes the value
of this symbol into the appropriate binary. With this, the symbol will
have the correct value at run time.

Macros are used to make this easier to use. As an example, this declares
a symbol that will access the 'u-boot-spl' entry to find the 'pos' value
(i.e. the position of SPL in the image):

   binman_sym_declare(unsigned long, u_boot_spl, pos);

This converts to a symbol called '_binman_u_boot_spl_prop_pos' in any
binary that includes it. Binman then updates the value in that binary,
ensuring that it can be accessed at runtime with:

   ulong u_boot_pos = binman_sym(ulong, u_boot_spl, pos);

This assigns the variable u_boot_pos to the position of SPL in the image.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Support enabling debug in tests
Simon Glass [Tue, 14 Nov 2017 01:55:00 +0000 (18:55 -0700)]
binman: Support enabling debug in tests

The elf module can provide some debugging information to assist with
figuring out what is going wrong. This is also useful in tests. Update the
-D option so that it is passed through to tests as well.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Adjust size of test SPL binary
Simon Glass [Tue, 14 Nov 2017 01:54:59 +0000 (18:54 -0700)]
binman: Adjust size of test SPL binary

This is only 3 bytes long which is not enough to hold two symbol values,
needed to test the binman symbols feature. Increase it to 15 bytes.

Using very small regions is useful since we can easily compare them in
tests and errors are fairly easy to diagnose.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Add tests binaries with binman symbols
Simon Glass [Tue, 14 Nov 2017 01:54:58 +0000 (18:54 -0700)]
binman: Add tests binaries with binman symbols

For testing we need to build some ELF files containing binman symbols. Add
these to the Makefile and check in the binaries:

   u_boot_binman_syms - normal, valid ELF file
   u_boot_binman_syms_bad - missing the __image_copy_start symbol
   u_boot_binman_syms_size - has a binman symbol with an invalid size

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Drop a stale comment about the 'board' feature
Simon Glass [Tue, 14 Nov 2017 01:54:57 +0000 (18:54 -0700)]
binman: Drop a stale comment about the 'board' feature

This feature is now supported. Drop the incorrect comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Add support for including spl/u-boot-spl-nodtb.bin
Simon Glass [Tue, 14 Nov 2017 01:54:56 +0000 (18:54 -0700)]
binman: Add support for including spl/u-boot-spl-nodtb.bin

This file contains SPL image without a device tree. Add support for
including this in images.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Add support for including spl/u-boot-spl.dtb
Simon Glass [Tue, 14 Nov 2017 01:54:55 +0000 (18:54 -0700)]
binman: Add support for including spl/u-boot-spl.dtb

This file contains the SPL device tree. Add support for including this by
itself in images.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agobinman: Add a function to read ELF symbols
Simon Glass [Tue, 14 Nov 2017 01:54:54 +0000 (18:54 -0700)]
binman: Add a function to read ELF symbols

In some cases we need to read symbols from U-Boot. At present we have a
a few cases which does this via 'nm' and 'grep'.

It is better to use objdump since that tells us the size of the symbols
and also whether it is weak or not.

Add a new module which reads ELF information from files. Update existing
uses of 'nm' to use this module.

Signed-off-by: Simon Glass <sjg@chromium.org>
6 years agoREADME: update the kernel coding style reference
Baruch Siach [Sun, 10 Dec 2017 15:34:35 +0000 (17:34 +0200)]
README: update the kernel coding style reference

The old CodingStyle document has been converted to ReST and moved
elsewhere. Link to the web version of this document instead.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
6 years agoARM: pxa: Remove unused ifdefs
Tuomas Tynkkynen [Sat, 9 Dec 2017 01:51:48 +0000 (03:51 +0200)]
ARM: pxa: Remove unused ifdefs

These ifdefs are protecting #include statements for files that have
never existed. AFAICT this hardware.h has been copied from the kernel
and the ifdefs have never served a role in U-Boot, so delete them.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
6 years agotest: py: Add an option to skip sleep test
Michal Simek [Fri, 8 Dec 2017 14:47:18 +0000 (15:47 +0100)]
test: py: Add an option to skip sleep test

Some QEMUs have a problem with time setup that's why
sleep test is failing. Introduce env__sleep_accurate
boardenv variable to have an option to skip sleep test.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
6 years agotest/py: gpt: update size of gpt partition
Patrick Delaunay [Wed, 6 Dec 2017 17:08:20 +0000 (18:08 +0100)]
test/py: gpt: update size of gpt partition

- avoid disturbing 0MiB partition size (in fact < 1MiB)
- test overlap limit between part1 and part2
- test gpt write with data with modifier 'M' for MiB

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
6 years agoSPL: Add FIT data-position property support
Peng Fan [Tue, 5 Dec 2017 05:20:59 +0000 (13:20 +0800)]
SPL: Add FIT data-position property support

For external data, FIT has a optional property "data-position" which
can set the external data to a fixed offset to FIT beginning.
Add the support for this property in SPL FIT.

Signed-off-by: Ye Li <ye.li@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tomas Melin <tomas.melin@vaisala.com>
Cc: Pantelis Antoniou <pantelis.antoniou@konsulko.com>
Cc: "Andrew F. Davis" <afd@ti.com>
Cc: Igor Grinberg <grinberg@compulab.co.il>
Cc: "tomas.melin@vaisala.com" <tomas.melin@vaisala.com>
Cc: Kever Yang <kever.yang@rock-chips.com>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Cc: "Cooper Jr., Franklin" <fcooper@ti.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Cc: Jean-Jacques Hiblot <jjhiblot@ti.com>
Cc: Rick Altherr <raltherr@google.com>
Cc: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: York Sun <york.sun@nxp.com>
6 years agoARM: omap3_logic: Enable NAND unlocking during Falcon mode
Adam Ford [Mon, 4 Dec 2017 23:54:50 +0000 (17:54 -0600)]
ARM: omap3_logic: Enable NAND unlocking during Falcon mode

Falcon mode was already working with SD card.  This enables the
unlocking of NAND to allow the NAND read & write.  This also
expands the README file based on the am335x describing how to
setup Falcon mode.

Signed-off-by: Adam Ford <aford173@gmail.com>
6 years agoARM: omap3_logic: Unlock NAND automatically in U-Boot
Adam Ford [Sun, 3 Dec 2017 12:24:53 +0000 (06:24 -0600)]
ARM: omap3_logic: Unlock NAND automatically in U-Boot

The Micron Flash is locked by default.  This will automaticlly
unlock so manually unlocking is unnecessary in U-Boot.

Signed-off-by: Adam Ford <aford173@gmail.com>
6 years agoomap3_logic: Increase CMD_SPL_WRITE_SIZE
Adam Ford [Sat, 2 Dec 2017 17:10:55 +0000 (11:10 -0600)]
omap3_logic: Increase CMD_SPL_WRITE_SIZE

The SPL-OS partition is 0x20000, so let's make
CONFIG_CMD_SPL_WRITE_SIZE same size. This should allow for better
falcon mode operation.

Signed-off-by: Adam Ford <aford173@gmail.com>
6 years agodrivers: spmi-msm: fix scanning for peripherals
Jorge Ramirez-Ortiz [Sat, 2 Dec 2017 16:24:42 +0000 (17:24 +0100)]
drivers: spmi-msm: fix scanning for peripherals

A typo in the probe function causes not all peripherals to be scanned
(in the case of the Dragonboard820c - work in progress - it wont find pmic0).

6 years agoata: Migrate CONFIG_MVSATA_IDE to Kconfig
Tuomas Tynkkynen [Fri, 8 Dec 2017 13:36:21 +0000 (15:36 +0200)]
ata: Migrate CONFIG_MVSATA_IDE to Kconfig

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
6 years agoata: Migrate CONFIG_LIBATA to Kconfig
Tuomas Tynkkynen [Fri, 8 Dec 2017 13:36:20 +0000 (15:36 +0200)]
ata: Migrate CONFIG_LIBATA to Kconfig

This symbol enables some library code used by various SATA drivers,
so make this a non-user-visible symbol select'ed by the respective
drivers, and let moveconfig handle the rest.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
6 years agoata: Migrate CONFIG_SCSI_AHCI to Kconfig
Tuomas Tynkkynen [Fri, 8 Dec 2017 13:36:19 +0000 (15:36 +0200)]
ata: Migrate CONFIG_SCSI_AHCI to Kconfig

And use 'imply' liberally.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
6 years agoata: Migrate CONFIG_DWC_AHSATA to Kconfig
Tuomas Tynkkynen [Fri, 8 Dec 2017 13:36:18 +0000 (15:36 +0200)]
ata: Migrate CONFIG_DWC_AHSATA to Kconfig

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
6 years agoata: Migrate CONFIG_FSL_SATA to Kconfig
Tuomas Tynkkynen [Fri, 8 Dec 2017 13:36:17 +0000 (15:36 +0200)]
ata: Migrate CONFIG_FSL_SATA to Kconfig

Use 'imply' here liberally to avoid the combinatorial explosion of
defconfig changes in the PowerPC boards.

Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>