Igor Opaniuk [Mon, 9 Dec 2019 10:33:32 +0000 (12:33 +0200)]
colibri_vf: add update_uboot wrapper
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.
Usage example:
> tftpboot ${loadaddr} ${board_name}/u-boot-nand.imx
> run update_uboot
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Mon, 9 Dec 2019 10:33:31 +0000 (12:33 +0200)]
colibri-imx6ull: add update_uboot wrapper
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.
Usage example:
> tftpboot ${loadaddr} ${board_name}/u-boot-nand.imx
> run update_uboot
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Mon, 9 Dec 2019 10:33:30 +0000 (12:33 +0200)]
colibri_imx6: add update_uboot wrapper
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.
> tftpboot ${loadaddr} ${board_name}/u-boot.img
> run update_uboot
> tftpboot ${loadaddr} ${board_name}/SPL
> run update_spl
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Mon, 9 Dec 2019 10:33:29 +0000 (12:33 +0200)]
apalis_imx6: add update_uboot wrapper
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.
Usage example:
> tftpboot ${loadaddr} ${board_name}/u-boot.img
> run update_uboot
> tftpboot ${loadaddr} ${board_name}/SPL
> run update_spl
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Igor Opaniuk [Mon, 9 Dec 2019 10:33:28 +0000 (12:33 +0200)]
colibri_imx7: add update_uboot wrapper
Add universal update_uboot wrapper that helps to update
U-Boot image on internal storage.
Usage example:
> tftpboot ${loadaddr} ${board_name}/u-boot-dtb.imx
> run update_uboot
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Steffen Dirkwinkel [Wed, 23 Oct 2019 05:40:43 +0000 (07:40 +0200)]
imx: cx9020: use distro boot
We switch from custom boot commands relying on uEnv.txt to distro boot.
This removes the automatic fpga bitstream loading in favor of loading
bitstreams via custom bootscripts (boot.scr) or after booting the
kernel.
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Steffen Dirkwinkel [Wed, 23 Oct 2019 05:40:42 +0000 (07:40 +0200)]
imx: cx9020: enable vidconsole by default
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Steffen Dirkwinkel [Wed, 23 Oct 2019 05:40:41 +0000 (07:40 +0200)]
imx: cx9020: migrate cx9020 to CONFIG_DM_USB
Note: gpio7_8 was never used for usb power regulator so we remove it here
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Steffen Dirkwinkel [Wed, 23 Oct 2019 05:40:40 +0000 (07:40 +0200)]
imx: cx9020: migrate cx9020 to CONFIG_DM_ETH
Acked-by: Patrick Bruenn <p.bruenn@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Parthiban Nallathambi [Mon, 4 Nov 2019 18:50:07 +0000 (19:50 +0100)]
imx: sync with kernel device tree for Phycore SoM
Sync the Linux Kernel 5.4-rc6 device tree for Phytec Phycore
SoM and Segin board based on imx6UL and imx6ULL.
Changes includes Phytec naming convention for the devicetree files.
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Igor Opaniuk [Thu, 28 Nov 2019 13:56:20 +0000 (15:56 +0200)]
mach-imx: bootaux: add dcache flushing before enabling M4
This patch fixes the issue with broken bootaux command,
when M4 binary is loaded and data cache isn't flushed
before M4 core is enabled.
Reproducing:
> tftpboot ${loadaddr} ${board_name}/hello_world.bin
> cp.b ${loadaddr} 0x7F8000 $filesize
> bootaux 0x7F8000
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Igor Opaniuk [Thu, 28 Nov 2019 13:56:19 +0000 (15:56 +0200)]
mach-imx: bootaux: print stack pointer and reset vector
1. Change information printed about loaded M4 binary, print the stack
pointer and reset vector addressed.
2. Add sanity check for the address provided as param.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Marek Vasut [Tue, 26 Nov 2019 08:33:29 +0000 (09:33 +0100)]
pci: imx: Add iMX6SX compatible
The driver works fine with iMX6SX, add the missing compatible string.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Suniel Mahesh [Wed, 27 Nov 2019 10:47:48 +0000 (16:17 +0530)]
arm: imx6: cm_fx6: Enable DM SPI and SPI_FLASH, fix SPL build errors
Enable driver model for SPI and SPI_FLASH to remove the following
compile warning on CM-FX6 SOM:
===================== WARNING ======================
This board does not use CONFIG_DM_SPI_FLASH. Please update
the board to use CONFIG_SPI_FLASH before the v2019.07 release.
====================================================
This change introduced SPL build error as shown:
In file included from include/common.h:47:0,
from drivers/mtd/spi/sf_probe.c:10:
drivers/mtd/spi/sf_probe.c: In function 'spi_flash_std_probe':
drivers/mtd/spi/sf_probe.c:149:54: error: dereferencing pointer to incomplete type 'struct dm_spi_slave_platdata'
scripts/Makefile.build:278: recipe for target 'spl/drivers/mtd/spi/sf_probe.o' failed
make[3]: *** [spl/drivers/mtd/spi/sf_probe.o] Error 1
scripts/Makefile.build:432: recipe for target 'spl/drivers/mtd/spi' failed
make[2]: *** [spl/drivers/mtd/spi] Error 2
Disabling DM for SPI support(SPI and SF) in SPL resolves the issue.
Target was compile tested, build was clean.
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Suniel Mahesh [Wed, 20 Nov 2019 09:55:01 +0000 (15:25 +0530)]
board: cm_fx6: Enable CONFIG_DM_ETH
Enable CONFIG_DM_ETH to remove compile warning on CM-FX6
SOM based target:
===================== WARNING ======================
This board does not use CONFIG_DM_ETH (Driver Model
for Ethernet drivers). Please update the board to use
CONFIG_DM_ETH before the v2020.07 release.
====================================================
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Suniel Mahesh [Wed, 20 Nov 2019 09:55:00 +0000 (15:25 +0530)]
board: cm_fx6: Enable DM support for video, fix build error
Enable driver model for Video to remove the following
compile warning on CM-FX6 SOM based target:
===================== WARNING ======================
This board does not use CONFIG_DM_VIDEO Please update
the board to use CONFIG_DM_VIDEO before the v2019.07 release.
====================================================
This change introduced build error as shown:
LD u-boot
drivers/built-in.o: In function ipu_displays_init'
arm-linux-ld.bfd: BFD (GNU Binutils) 2.29.1 assertion fail elf32-arm.c:9509
Makefile:1621: recipe for target 'u-boot' failed
make: *** [u-boot] Error 1
The DM converted video driver calls ipu_displays_init
in its probe, which inturn calls relevant board_video_skip.
Defining ipu_displays_init in the board file fixes build error.
Target was compile tested, build was clean.
Signed-off-by: Suniel Mahesh <sunil.m@techveda.org>
Marek Vasut [Tue, 26 Nov 2019 08:34:52 +0000 (09:34 +0100)]
ARM: mx6: ddr: Add support for iMX6SX
This patch adds support for iMX6SX MMDC into the DDR calibration
code. The only difference between MX6DQ and MX6SX is that the SX
has 2 SDQS registers, while the DQ has 8.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Eric Nelson <eric@nelint.com>
Marek Vasut [Tue, 26 Nov 2019 08:34:51 +0000 (09:34 +0100)]
ARM: mx6: ddr: Configure all SDQS pullups using loop
Instead of explicitly setting up each SDQS register, use a loop.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Eric Nelson <eric@nelint.com>
Marek Vasut [Tue, 26 Nov 2019 08:34:50 +0000 (09:34 +0100)]
ARM: mx6: ddr: Factor out SDQS configuration code
Pull out the code turning SDQS pullups on and off into a separate
function, since it is replicated in two places in the code and it
is the single place in the entire function which is SoC dependent.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Eric Nelson <eric@nelint.com>
Marek Vasut [Tue, 26 Nov 2019 08:34:49 +0000 (09:34 +0100)]
ARM: mx6: ddr: Make debug prints work with tiny printf
The %08X format returns just zeroes with tiny printf, which is
horribly confusing, especially when debugging DRAM calibration
problems. Change the format to %08x (with lowercase x), which
behaves correctly with either implementation of printf in SPL.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Eric Nelson <eric@nelint.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Eric Nelson <eric@nelint.com>
Claudius Heine [Fri, 29 Nov 2019 07:59:03 +0000 (08:59 +0100)]
ARM: imx6: DHCOM i.MX6 PDK: Enable sysreset driver and wdt command
The SPL does not have DM enabled and therefor still needs to use the
hardware watchdog interface provided by the imx-watchdog driver.
Fixes: broken reset command after
f2929d11a639 ("watchdog: imx: Use
immediate reset bits for expire_now")
Signed-off-by: Claudius Heine <ch@denx.de>
Claudius Heine [Fri, 29 Nov 2019 07:59:02 +0000 (08:59 +0100)]
ARM: dts: dh-imx6: add u-boot specific wdt-reboot node
The wdt-reboot node is needed for the sysreset_watchdog driver to
register a watchdog as a reset handler in case 'CONFIG_SYSRESET' is
enabled.
Signed-off-by: Claudius Heine <ch@denx.de>
Baruch Siach [Sun, 10 Nov 2019 12:38:07 +0000 (14:38 +0200)]
mx6cuboxi: enable OF_CONTROL with DM_MMC and DM_USB
Make first step in DT/DM migration. Enable OF_CONTROL only for the main
U-Boot image for now.
Remove mmc_init_main() because board_mmc_init() is not called when
DM_MMC is enabled.
DM_MMC requires DM_GPIO for card-detect to work. That in turn makes gpio
request mandatory. Add code to request/free gpios in platform code.
MMC devices are now numbered according to DT. The SD card is 1, and eMMC
is 2. Account for that in board_mmc_get_env_dev(), BOOT_TARGET_DEVICES,
and has_emmc().
DM_MMC requires BLK. However, the (BLK && !DM_USB) combination disables
USB_STORAGE. Enable DM_USB to preserve USB functionality. Add also
DM_REGULATORS for the USB power controller. This allows us to drop
board_ehci_hcd_init() and setup_usb().
Runtime selection of DT is necessary because of the i.MX6QD vs i.MX6SDL
incompatibility. DT selection does not rely on GPIOs, since DM_GPIO
depends on DT. Instead, we take one "fully featured" DT of each variant.
That should be enough to boot from both SD card and eMMC.
Since we don't select the exact DT, override the generic
show_board_info() that shows the selected DT 'model' field.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Baruch Siach [Sun, 10 Nov 2019 12:38:06 +0000 (14:38 +0200)]
arm: dts: hummingboard: add cubox/hummingboard DT (part 2 of 2)
These DT files are copied from kernel v5.3 with no changes.
This is part 2 of 2 commits. Included are DT files for SOM rev 1.5, and
Hummingboard2 Gate/Edge.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Baruch Siach [Sun, 10 Nov 2019 12:38:05 +0000 (14:38 +0200)]
arm: dts: hummingboard: add cubox/hummingboard DT (part 1 of 2)
These DT files are copied from kernel v5.3 with no changes.
This is part 1 of 2 commits. Included are DT files for the original
Cubox-i and Hummingboard Base/Pro.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Baruch Siach [Sun, 10 Nov 2019 12:38:04 +0000 (14:38 +0200)]
dt-bindings: add imx-audmux macro definitions
Import fsl-imx-audmux.h from Linux as of v5.4-rc6. The header is
unchanged since v4.18.
That would make it easier to import DT files that depend on imx-audmux
definitions from the kernel tree.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Robert Beckett [Tue, 12 Nov 2019 19:15:20 +0000 (19:15 +0000)]
board: ge: mx53ppd: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Robert Beckett [Tue, 12 Nov 2019 19:15:19 +0000 (19:15 +0000)]
board: ge: bx50v3: use imx wdt
Enable DM imx WDT
Enable SYSRESET_WATCHDOG to maintain WDT based reset ability
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Ian Ray [Tue, 12 Nov 2019 19:15:18 +0000 (19:15 +0000)]
board: ge: pass rtc_status via device tree
Pass rtc_status via the device tree, instead of on kernel command line.
Additionally, the 2038 mitigation is reported, if applied successfully.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Denis Zalevskiy [Tue, 12 Nov 2019 19:15:17 +0000 (19:15 +0000)]
board: ge: bx50v3: Enable DM for PCI and ethernet
DM for PCI pulls DM for ethernet that also needs other changes described
below to build u-boot and keep existing functionality - ability to update
MAC addresses of FEC ethernet adapter and I210 adapter connected to the
Marvell switch.
- fec_mxc driver with DM needs PHYLIB;
- configuration items are moved from ge_bx50v3.h to ge_bx50v3_defconfig;
- FEC is marked as eth0 because it is always present, so indices changed:
I210 are still probed in the same order;
- board_eth_init() was used by legacy ethernet, setup for enet iomux and
pcie is moved to the board_late_init();
- pci_init() is called from the board_late_init() to initiate PCI bus
probing, so I210 devices are propagated to the device tree;
Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
[Describe PHY reset in device tree]
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Denis Zalevskiy [Tue, 12 Nov 2019 19:15:16 +0000 (19:15 +0000)]
configs: ppd: DM for USB and regulators PPD
DM should be used for USB since 2019.07, it also requires DM for
regulators.
Signed-off-by: Denis Zalevskiy <denis.zalevskiy@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Ian Ray [Tue, 12 Nov 2019 19:15:15 +0000 (19:15 +0000)]
board: ge: bx50v3: Fix message output to video console
Use vidconsole for output to the LCD, now that DM_VIDEO is used. Write
white text on a black background, like before migrating to DM_VIDEO.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Ian Ray [Tue, 12 Nov 2019 19:15:14 +0000 (19:15 +0000)]
board: ge: bx50v3: Fix run-time warning
Fix GPIO reservation warning on code paths that do not need LVDS power.
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Ian Ray [Tue, 12 Nov 2019 19:15:13 +0000 (19:15 +0000)]
configs: bx50v3: Fix boot hang with video
Fixes commit:
0b09f7b15052bb419e318e38da453be46e5a13e5, which converted
to DM_VIDEO, but requires more memory.
[Inspired by
9002e735e71754a90adbb9676c0ffb1964dbc288]
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Robert Beckett [Tue, 12 Nov 2019 19:15:12 +0000 (19:15 +0000)]
board: ge: ppd: sync device tree from Linux
Copy device tree from linux for PPD.
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Robert Beckett [Tue, 12 Nov 2019 19:15:11 +0000 (19:15 +0000)]
board: ge: bx50v3: sync devicetrees from Linux
Copy device trees from linux, keeping them as separate files for
each board to ease future sync.
Update board code to use generic bx50v3 dt initially, then select
the specific dt based on board detection.
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Lukasz Majewski [Sun, 8 Dec 2019 21:06:56 +0000 (22:06 +0100)]
imx: Add support for i.MX28 based XEA board
This patch introduces support for i.MX28 based XEA board.
This board supports DM/DTS in U-Boot proper as well as DM aware drivers
in SPL (u-boot.sb) by using OF_PLATDATA.
More detailed information regarding usage of it can be found in
./board/liebherr/xea/README file.
U-Boot SPL
2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
Trying to boot from MMC1
MMC0: Command 8 timeout (status 0xf0344020)
mmc_load_image_raw_sector: mmc block read error
U-Boot
2019.10-rc1-00233-g6aa549f05c (Aug 12 2019 - 09:23:36 +0200)
CPU: Freescale i.MX28 rev1.2 at 454 MHz
BOOT: SSP SPI #3, master, 3V3 NOR
Model: Liebherr (LWE) XEA i.MX28 Board
DRAM: 128 MiB
MMC: MXS MMC: 0
Loading Environment from SPI Flash... SF: Detected n25q128a13 with page size 256 Bytes, erase size 64 KiB, total 16 MiB
OK
In: serial
Out: serial
Err: serial
Net:
Warning: ethernet@
800f0000 (eth0) using random MAC address - ce:e1:9e:46:f3:a2
eth0: ethernet@
800f0000
Hit any key to stop autoboot: 0
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:32 +0000 (11:23 +0100)]
imx6: aristainetos: add support for rev C board
add support for revision C boards. This board has
no longer a NAND.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:31 +0000 (11:23 +0100)]
imx6: aristainetos: add aristainetos 2b csl
add aristainetso board version CSL.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:30 +0000 (11:23 +0100)]
imx6: aristainetos: readd aristainetos 2b board
readd aristainetos 2b board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:29 +0000 (11:23 +0100)]
imx6: aristainetos: enable HAB boot
enable IMX_HAB on aristianetos board
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:28 +0000 (11:23 +0100)]
imx6: aristainetos: cleanup default Environment
sync defaut Envoronment with customer changes.
Unfortunately they are not changeable, as already
board is in production mode.
Get rid of the big bootcommand and set bootcommand
through Kconfig option.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:27 +0000 (11:23 +0100)]
imx6: aristainetos: WDT DM conversion enable WDT reset
enable config symbols:
CONFIG_SYSRESET
CONFIG_SYSRESET_WATCHDOG
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:26 +0000 (11:23 +0100)]
imx6: aristainetos: cleanup bootmode settings
on the aristainetos there are some jumpers for
changing behaviour setting up Environment. Clean
this up.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:25 +0000 (11:23 +0100)]
imx6: aristainetos: add version variable
add VERSION_VARIABLE
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:24 +0000 (11:23 +0100)]
imx6: aristainetos: add AUTOBOOT_KEYED
add stop autobooting via SHA256 encrypted password.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:23 +0000 (11:23 +0100)]
imx6: aristainetos: add i2c eeprom support
add support for i2c eeprom and add parsing "Rescue"
or "DefEnv" at offset 0x1ff0.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:22 +0000 (11:23 +0100)]
imx6: aristainetos: get rid of CONFIG_BOARDNAME
CONFIG_BOARDNAME is not longer needed, as we use
the model information from DTS.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:21 +0000 (11:23 +0100)]
imx6: aristainetos: convert to DM_PWM/DM_BACKLIGHT
use DM_PWM and DM_BLACKLIGHT support and remove
board code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:20 +0000 (11:23 +0100)]
imx6: aristainetos: add DM_I2C support
enable DM_I2C in defconfig and remove i2c specific
board code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:19 +0000 (11:23 +0100)]
imx6: aristainetos: add DM_VIDEO support
add DM_VIDEO support and remove now unneeded board
code. As we show a bmp logo on boot, call now
bmp_display() from board code and do not use
cfb_console anymore.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:18 +0000 (11:23 +0100)]
imx6: aristainetos: enable DM_ETH
enable DM_ETH and remove unneeded board code.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:17 +0000 (11:23 +0100)]
imx6: aristainetos: convert CONFIG_DM_SPI
enable CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH
and get rid of build removal warnings.
define CONFIG_GPIO_ENABLE_SPI_FLASH is not longer
needed, so remove it from config_whitelist.txt
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:16 +0000 (11:23 +0100)]
imx6: aristainetos: convert to DM_USB
Drop CONFIG_USB_MAX_CONTROLLER_COUNT and enable DM_USB
in defconfig.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:15 +0000 (11:23 +0100)]
imx6: aristainetos: convert gpio pins to DM and DTS
Enable DM_GPIO, GPIO_HOG, LED and LED_GPIO as gpio
and LEDs are now defined in DTS. Enable also here
the pinctrl driver, so pinmux setup is also done.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:14 +0000 (11:23 +0100)]
imx6: aristainetos: convert to DM_MMC
Enable DM_MMC support.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:13 +0000 (11:23 +0100)]
imx6: aristainetos: add DM_SERIAL support
add DM_SERIAL support for the aristainetos board, and
remove not used code from board code.
remove CONSOLE_OVERWRITE_ROUTINE.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:12 +0000 (11:23 +0100)]
imx6: aristainetos: prepare dts for other board versions
as we switch to support DM and DTS, rework the existing
DTS trees. Change also Linux specific Device trees, goal
is to push this changes to linux.
Collect U-Boot specific changes in separate "*u-boot*" dts
files.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:11 +0000 (11:23 +0100)]
imx6: aristainetos: remove aristainetos-v2.c
remove aristainetos-v2.c file, as we now want to
switch to DM/DTS support and have all board specific
code in one file. Goal is to setup differences
through DT.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:10 +0000 (11:23 +0100)]
imx6: aristainetos: add thumb build
add thumb build to aristainetos build to save
binary space.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:09 +0000 (11:23 +0100)]
imx6: aristainetos: add device tree from linux
Add device trees from Linux in preparation for driver model
conversions.
device tree files taken from Linux:
71ae5fc87c34: "Merge tag 'linux-kselftest-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest"
and added SPDX license identifier.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:08 +0000 (11:23 +0100)]
imx6: aristainetos: disable gigabit support
gigabit support does not work on the aristainetos
board, so disable it.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:07 +0000 (11:23 +0100)]
imx6: aristainetos: remove 2b version
remove 2b version of aristainetos board, as it
is easier to make the DM / DTS port and introduce
the 2b board version again (also some more board
version).
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:06 +0000 (11:23 +0100)]
imx6: aristainetos: move defines to Kconfig
move defines, which are already moved to Kconfig
out of board config.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:05 +0000 (11:23 +0100)]
video: lg4573: convert to DM
convert this driver to support DM.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Sun, 1 Dec 2019 10:23:04 +0000 (11:23 +0100)]
imx6: remove aristainetos board
remove not anymore used aristainetos board.
Signed-off-by: Heiko Schocher <hs@denx.de>
Tom Rini [Mon, 6 Jan 2020 20:56:31 +0000 (15:56 -0500)]
Prepare v2020.01
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Jan 2020 17:00:04 +0000 (12:00 -0500)]
Revert "mmc: davinci: drop struct davinci_mmc_plat"
Adam Ford reports that this change breaks booting on da850-evm and
Bartosz Golaszewski agrees that with the impending release we should
revert the change for now. With that noted:
This reverts commit
21a4d80a710c79053ac1deaa65ff9b69e6c031d4.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 3 Jan 2020 14:47:22 +0000 (09:47 -0500)]
Merge branch '2020-01-03-master-imports'
- Fixes for host tools with musl C library
- Two fixes for TI K3 platforms
Lokesh Vutla [Tue, 31 Dec 2019 10:19:55 +0000 (15:49 +0530)]
arm: mach-k3: Enable WA for R5F deadlock
On K3 devices there are 2 conditions where R5F can deadlock:
1.When software is performing series of store operations to
cacheable write back/write allocate memory region and later
on software execute barrier operation (DSB or DMB). R5F may
hang at the barrier instruction.
2.When software is performing a mix of load and store operations
within a tight loop and store operations are all writing to
cacheable write back/write allocates memory regions, R5F may
hang at one of the load instruction.
To avoid the above two conditions disable linefill optimization
inside Cortex R5F which will make R5F to only issue up to 2 cache
line fills at any point of time.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Lokesh Vutla [Tue, 31 Dec 2019 10:18:48 +0000 (15:48 +0530)]
arm: dts: k3-j721e: ddr: Update to 0.2 version of DDR config tool
Update the ddr settings to use the DDR reg config tool rev 0.2.0.
This reduces the aging count(in DDRSS_CTL_274_DATA reg) to 15 in-order
to avoid DSS underflow errors.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Kevin Scholz <k-scholz@ti.com>
Sergei Trofimovich [Mon, 30 Dec 2019 15:53:42 +0000 (15:53 +0000)]
include/u-boot/crc.h: pull 'uint' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:
```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc)
...
include/u-boot/crc.h:37:44: error: unknown type name 'uint'; did you mean 'int'?
37 | void crc16_ccitt_wd_buf(const uint8_t *in, uint len,
| ^~~~
| int
```
Note: 'uint' is not defined there.
On glibc 'uint' comes from <sys/types.h> and happens to work on most .c files.
The change imports 'uint' declaration from '<compiler.h>'.
Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Sergei Trofimovich [Mon, 30 Dec 2019 15:53:41 +0000 (15:53 +0000)]
include: fix 'ulong' definition on musl targets
The build failure was originally reported on arm64-musl
target at https://bugs.gentoo.org/703132. Here is the amd64-musl
variant:
```
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-only_defconfig -j$(nproc)
$ LANG=C make CROSS_COMPILE=x86_64-gentoo-linux-musl- tools-all -j$(nproc)
...
In file included from tools/env/../../env/flags.c:7,
from tools/env/env_flags.c:1:
include/env.h:159:1: error: unknown type name 'ulong'; did you mean 'long'?
159 | ulong env_get_ulong(const char *name, int base, ulong default_val);
| ^~~~~
| long
```
Note: 'ulong' is not defined there.
On glibc 'ulong' comes from <sys/types.h>:
```c
/* Old compatibility names for C types. */
typedef unsigned long int ulong;
```
On musl it comes from <sys/types.h> as well but from under different guards:
```c
typedef unsigned long u_long, ulong;
```
The change inlines 'ulong' define similar to 'uint' define.
Bug: https://bugs.gentoo.org/703132
Signed-off-by: Sergei Trofimovich <slyfox@gentoo.org>
Tom Rini [Thu, 2 Jan 2020 23:12:05 +0000 (18:12 -0500)]
Merge tag 'fixes-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-video
- fix missing graphics output on some x86 boards
- avoid using #ifdef in video code
- add .gitignore for video font *.S files
Dario Binacchi [Tue, 31 Dec 2019 17:09:14 +0000 (18:09 +0100)]
video: add wrappers for ttf type files to .gitignore
The scripts/Makefile.lib generates an assembler file (*.S) to wrap the
font data for each file of type ttf defined in Kconfig.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Tom Rini [Thu, 2 Jan 2020 15:28:26 +0000 (10:28 -0500)]
Merge tag 'u-boot-rockchip-
20191231' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix latest mainline kernel for rk3308
- Update rk3288-evb config to suport OP-TEE
- Fix for firefly-px30 DEBUG_UART channel and make it standalone
- Script make_fit_atf add python3 support
- Fix rk3328 timer with correct COUNTER_FREQUENCY
- Fix rk3328 ATF support with enable spl-fifo-mode
Tom Rini [Thu, 2 Jan 2020 15:27:47 +0000 (10:27 -0500)]
Merge branch '2020-01-02-master-imports'
- Assorted test.py fixes
- Other minor changes
Simon Glass [Fri, 27 Dec 2019 14:46:30 +0000 (07:46 -0700)]
test: Fix the boardspec for the SPL handoff test
This test currently does not run because it specifies the sandbox board
instead of sandbox_spl. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Igor Opaniuk [Tue, 17 Dec 2019 12:48:54 +0000 (14:48 +0200)]
mailmap: Update mail address for Igor Opaniuk
My address at Linaro doesn't exist anymore, so people
keep getting mail delivery error responses. Map this address
to the actual one.
Signed-off-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
Stephen Warren [Wed, 18 Dec 2019 18:37:21 +0000 (11:37 -0700)]
test_env: don't strip() printenv results
get_env() was originally written to strip() the output of printenv to
isolate the test from any whitespace changes in printenv's output.
However, this throws away any whitespace in the variable value, which can
cause issues when test code expects to see that whitespace. In fact,
printenv never adds any whitespace at all, so there's no need to strip.
The strip causes a practical problem for test_env_echo_exists() if
state_test_env.get_existent_var() happens to choose a U-Boot variable that
contains trailing whitespace. This is true for variable boot_targets.
With Python 2, get_existent_var() never returned boot_targets so this
issue never caused a practical problem.
With Python 3, get_existent_var does sometimes return boot_targets, no
doubt due to Python 3's different dict hash key order implementation,
about 0.5-2% of the time, so this test appears intermittent. With the
strip removed, this intermittency is solved, since the test passes for all
possible U-Boot variables.
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Robert P. J. Day [Wed, 25 Dec 2019 11:34:07 +0000 (06:34 -0500)]
arch/arm/Kconfig: typo/grammar/punctuation fixes
Various (mostly minor) spelling, grammar and punctuation tweaks for
arch/arm/Kconfig.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Dario Binacchi [Sun, 29 Dec 2019 12:47:32 +0000 (13:47 +0100)]
.gitignore: ignore files generated by asn1 compiler
As described in doc/README.asn1 document the tools/asn1_compiler is used
to "generate bytecode as a C file (*.asn1.[ch]) from *.asn1 file".
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Dario Binacchi [Sun, 29 Dec 2019 12:44:18 +0000 (13:44 +0100)]
tools: .gitignore: add asn1_compiler
Add the tool to the ignore list to prevent being marked as unversioned.
Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Sat, 21 Dec 2019 01:10:37 +0000 (18:10 -0700)]
video: Avoid using #ifdef in video-uclass.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use IS_ENABLED(), etc., instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:36 +0000 (18:10 -0700)]
video: Avoid using #ifdef in vidconsole-uclass.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use CONFIG_IS_ENABLED() instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:35 +0000 (18:10 -0700)]
video: Avoid using #ifdef in console_rotate.c
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use IS_ENABLED() instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:34 +0000 (18:10 -0700)]
video: Avoid using #ifdef in video blitting code
This code does not really need to use #ifdef. We can use if() instead and
gain build coverage without impacting code size.
Change the #ifdefs to use IS_ENABLED() instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sat, 21 Dec 2019 01:10:33 +0000 (18:10 -0700)]
video: x86: Enable 32-bit graphics by default
Most x86 boards that use video make use of 32bpp graphics. Enable this by
default. This fixes missing graphics output on some x86 boards.
Also remove the unnecessary 'default n' while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Kever Yang [Tue, 31 Dec 2019 08:02:59 +0000 (16:02 +0800)]
rockchip: evb-rk3328: Enable support ATF in SPL
Enable the ATF in SPL and adjust the SPL STACK/HEAD at the same time to
support ATF entry at 0x40000.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Tue, 31 Dec 2019 07:57:55 +0000 (15:57 +0800)]
rockchip: rk3328: enable spl-fifo-mode for emmc and sdmmc
Since mmc to sram can't do dma, add patch to prevent aborts transfering
TF-A parts.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Kever Yang [Tue, 31 Dec 2019 07:17:56 +0000 (15:17 +0800)]
rockchip: rk3328: add COUNTER_FREQUENCY definition
The arch timer needs COUNTER_FREQUENCY to get correct counter, add it to
make the timer works correct.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Tom Rini [Sat, 28 Dec 2019 13:07:16 +0000 (08:07 -0500)]
Merge tag 'u-boot-imx-
20191228' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
Fixes for 2020.01
-----------------
- Fixes for Nitrogen6x
- Fix corruption for mx51evk
- colibri i.MX6: fix broken ESDHC conversion
- mx6sxsabresd: fix broken mmcdev
- imx6q_logic: cleanup boot sequence
- update ATF for imx8mq_evk
- pfuze: fix pmic_get()
Travis CI: https://travis-ci.org/sbabic/u-boot-imx/builds/
630007464
Tom Rini [Fri, 27 Dec 2019 21:46:38 +0000 (16:46 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi
- Orange Pi Zero Plus 2 support
- sunxi psci, prcm fixes
Tom Rini [Fri, 27 Dec 2019 21:46:15 +0000 (16:46 -0500)]
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-spi
- rk spi transfer limit fix
- Gigadevice, gd25q128 support
- spi-nor-core warnings
Patrik Dahlström [Sat, 21 Dec 2019 16:18:22 +0000 (17:18 +0100)]
omap3_beagle: Change NAND ECC scheme back to OMAP_ECC_HAM1_CODE_HW
The omap3_beagle NAND ECC scheme was changed in
4b37928d357 for unknown
reasons, leading to uncorrectible ecc errors. This commit changes it
back to what it was before.
Signed-off-by: Patrik Dahlström <risca@dalakolonin.se>
Robert Beckett [Tue, 29 Oct 2019 19:07:03 +0000 (19:07 +0000)]
rtc: rx8010js: add compatible string
Add compatible string used by Linux.
Allows for simpler syncing of device trees.
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Robert Beckett [Mon, 28 Oct 2019 19:10:10 +0000 (19:10 +0000)]
rtc: s35392a: add compatible strings
Add compatible strings used by Linux.
Allows for simpler syncing of device trees.
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Robert Beckett [Mon, 28 Oct 2019 18:49:15 +0000 (18:49 +0000)]
rtc: rx8010sj: fix DM initialization
pass the udevice by reference instead of double ref
Signed-off-by: Robert Beckett <bob.beckett@collabora.com>
Adam Ford [Sun, 3 Nov 2019 13:58:40 +0000 (07:58 -0600)]
ARM: imx6q_logic: Cleanup boot sequence check
The board_boot_order() function currenly assumes that the boot source
is MMC/eMMC, but this isn't true for the NAND devices.
This patch cleans up board_boot_order() to check for NAND, SD, ESD,
MMC or EMMC. Anything beyond these are not supported, so it will
default back to the serial downloader if any of those devices are not
available.
Fixes:
9fb50c68daa6 ("ARM: imx6q_logic: Fix MMC2 booting")
Signed-off-by: Adam Ford <aford173@gmail.com>
Troy Kisky [Mon, 4 Nov 2019 02:20:05 +0000 (18:20 -0800)]
ARM: i.MX6: TARGET_NITROGEN6X: add 'select MX6QDL'
This fixes commit <
91435cd40d30> "ARM: i.MX6: exclude the ARM errata
from i.MX6 UP system"
for nitrogen6x. The above commit removed the errata for the board
since MX6Q/MXDL/MX6S is selected via CONFIG_SYS_EXTRA_OPTIONS
This restores the errata configs.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
projects / oweals / u-boot.git / log