Alif M. Ahmad [Sun, 23 Jul 2017 03:08:04 +0000 (03:08 +0000)]
scripts/config: import qconf
Import qconf.cc, qconf.h, and images.c from linux kernel 4.9.13 archive.
Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
Felix Fietkau [Thu, 20 Jul 2017 10:57:44 +0000 (12:57 +0200)]
ramips: add support for switching between 3-byte and 4-byte addressing on w25q256 flash
On some devices the flash chip needs to be in 3-byte addressing mode during
reboot, otherwise the boot loader will fail to start.
This mode however does not allow regular reads/writes onto the upper 16M
half. W25Q256 has separate read commands for reading from >16M, however
it does not have any separate write commands.
This patch changes the code to leave the chip in 3-byte mode most of the
time and only switch during erase/write cycles that go to >16M
addresses.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hans Dedecker [Tue, 31 Oct 2017 17:25:14 +0000 (18:25 +0100)]
nghttp2: switch to release tarball
Switch from git to xz release tarball as there's no good reason to keep
using git when release tarballs are provided.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Baptiste Jonglez [Fri, 27 Oct 2017 18:45:53 +0000 (20:45 +0200)]
openssl: Enable assembler optimizations for aarch64
OpenSSL is built with the generic linux settings for most targets,
including aarch64. These generic settings are designed for 32-bit CPU and
provide no assembler optmization: this is widely suboptimal for aarch64.
This patch simply switches to the aarch64 settings that are already
available in OpenSSL.
Here is the output of "openssl speed" before the optimization, with
"(...)" representing build flags that didn't change:
OpenSSL 1.0.2l 25 May 2017
options:bn(64,32) rc4(ptr,char) des(idx,cisc,2,int) aes(partial) blowfish(ptr)
compiler: aarch64-openwrt-linux-musl-gcc (...)
And after this patch, OpenSSL uses 64 bit mode and assembler optimizations:
OpenSSL 1.0.2l 25 May 2017
options:bn(64,64) rc4(ptr,char) des(idx,cisc,2,int) aes(partial) blowfish(ptr)
compiler: aarch64-openwrt-linux-musl-gcc (...) -DSHA1_ASM -DSHA256_ASM -DSHA512_ASM
Here are some benchmarks on a pine64+ running latest LEDE master r5142-
20d363aed3:
before# openssl speed sha aes blowfish
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 3918.89k 9982.43k 19148.03k 24933.03k 27325.78k
sha256 4604.51k 10240.64k 17472.51k 21355.18k 22801.07k
sha512 3662.19k 14539.41k 21443.16k 29544.11k 33177.60k
blowfish cbc 16266.63k 16940.86k 17176.92k 17237.33k 17252.35k
aes-128 cbc 19712.95k 21447.40k 22091.09k 22258.35k 22304.09k
aes-192 cbc 17680.12k 19064.47k 19572.14k 19703.13k 19737.26k
aes-256 cbc 15986.67k 17132.48k 17537.28k 17657.17k 17689.26k
after# openssl speed sha aes blowfish
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 6770.87k 26172.80k 86878.38k 205649.58k 345978.20k
sha256 20913.93k 74663.85k 184658.18k 290891.09k 351032.66k
sha512 7633.10k 30110.14k 50083.24k 71883.43k 82485.25k
blowfish cbc 16224.93k 16933.55k 17173.76k 17234.94k 17252.35k
aes-128 cbc 19425.74k 21193.31k 22065.74k 22304.77k 22380.54k
aes-192 cbc 17452.29k 18883.84k 19536.90k 19741.70k 19800.06k
aes-256 cbc 15815.89k 17003.01k 17530.03k 17695.40k 17746.60k
For some reason AES and blowfish do not benefit, but SHA performance
improves between 1.7x and 15x. SHA256 clearly benefits the most from the
optimization (4.5x on small blocks, 15x on large blocks!).
When using EVP (with "openssl speed -evp <algo>"):
# Before, EVP mode
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 3824.46k 10049.66k 19170.56k 24947.03k 27325.78k
sha256 3368.33k 8511.15k 16061.44k 20772.52k 22721.88k
sha512 2845.23k 11381.57k 19467.69k 28512.26k 33008.30k
bf-cbc 15146.74k 16623.83k 17092.01k 17211.39k 17249.62k
aes-128-cbc 17873.03k 20870.61k 21933.65k 22216.36k 22301.35k
aes-192-cbc 16184.18k 18607.15k 19447.13k 19670.02k 19737.26k
aes-256-cbc 14774.06k 16757.25k 17457.58k 17639.42k 17686.53k
# After, EVP mode
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes
sha1 7056.97k 27142.10k 89515.86k 209155.41k 347419.99k
sha256 7745.70k 29750.06k 95341.48k 211001.69k 332376.75k
sha512 4550.47k 18086.06k 39997.10k 65880.75k 81431.21k
bf-cbc 15129.20k 16619.03k 17090.56k 17212.76k 17246.89k
aes-128-cbc 99619.74k 269032.34k 450214.23k 567353.00k 613933.06k
aes-192-cbc 93180.74k 231017.79k 361766.66k 433671.51k 461731.16k
aes-256-cbc 89343.23k 209858.58k 310160.04k 362234.88k 380878.85k
Blowfish does not seem to have assembler optimization at all, and SHA
still benefits (between 1.6x and 14.5x) but is generally slower than in
non-EVP mode.
However, AES performance is improved between 5.5x and 27.5x, which is
really impressive! For aes-128-cbc on large blocks, a core i7-6600U
@2.60GHz is only twice as fast...
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>
Jonas Gorski [Sun, 29 Oct 2017 22:27:33 +0000 (23:27 +0100)]
acx-mac80211: allow compilation on 4.9
acx-mac80211 compiles fine with 4.9, so no reason to not allow it.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Thu, 12 Oct 2017 08:50:08 +0000 (10:50 +0200)]
ar7: add kernel 4.9 support
Compile and run tested on WAG354Gv1.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sun, 29 Oct 2017 22:28:39 +0000 (23:28 +0100)]
ar7: drop unused 4.1 support
Kernel 4.1 isn't support anymore anyway.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sun, 29 Oct 2017 22:12:20 +0000 (23:12 +0100)]
ar7: unbreak serial console
Serial output was broken since 3.16 for shared uarts between
kernel and login. Fix this by adding a fix sent upstream.
While at it, drop a useless patch that adds duplicate code.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Thu, 12 Oct 2017 08:51:53 +0000 (10:51 +0200)]
ar7: remove gpio character device
There are no obvious users, and any out of tree users should convert to
one of the generic APIs.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Thu, 19 Oct 2017 13:47:41 +0000 (15:47 +0200)]
ar7-atm: fix function signatures with expected ones
Newer kernels treat differing signatures an error, not just a warning,
so fix the signatures to match.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Fri, 13 Oct 2017 11:17:51 +0000 (13:17 +0200)]
ar7-atm: fixup proc fixes
They were incomplete, so fix them to properly update the function signatures
to what is expected.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Fri, 13 Oct 2017 09:32:31 +0000 (11:32 +0200)]
ar7-atm: drop LINUX_VERSION tests
Minimum supported kernel is 3.18, so we don't need to test for anything
older. In addition, the API hasn't changed since then, so we don't need
to check for any kernel version at all. This helps to keeps the amount
of changes more managable.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Hans Dedecker [Sun, 29 Oct 2017 09:32:42 +0000 (10:32 +0100)]
curl: bump to 7.56.1
Refresh patches
Remove 320-curl-confopts.m4-fix-disable-threaded-resolver.patch as
integrated upstream
See https://curl.haxx.se/changes.html for the bugfixes in 7.56.0 and
7.56.1
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sun, 29 Oct 2017 21:59:31 +0000 (22:59 +0100)]
nghttp2: bump to 1.27.0
Changes in v1.27.0 :
build: Fixed accidental compiler flags concatenation for MSVC (Patch from LazyHamster) (GH-1029)
build: Reduce libxml2 version requirement to 2.6.26 (Patch from Mike Lothian) (GH-1020)
asio: Support for Windows / MinGW (Patch from Daniel Evers) (GH-1027)
h2load: Print out h2 header fields with --verbose option (GH-1015)
nghttpx: Send non-final response to HTTP/1.1 or HTTP/2 client only (GH-1016)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hauke Mehrtens [Sun, 29 Oct 2017 15:58:44 +0000 (16:58 +0100)]
ltq-atm: Add missing dependency to kmod-ltq-adsl-ase-mei
Commit
2e496876c60 fixed the generation of the depends line for external
kernel modules which makes it possible for the build system to
automatically detect this missing dependency. This fixes the build bot
build of the lantiq/aes target.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Karl Vogel [Fri, 13 Oct 2017 09:10:03 +0000 (11:10 +0200)]
build: use KERNEL_MAKE_FLAGS for kernel file compilations
The build system already defines KERNEL_CROSS which defaults to TARGET_CROSS.
Make use of this variable for kernel makefiles.
Signed-off-by: Karl Vogel <karl.vogel@gmail.com>
Matt Mets [Fri, 27 Oct 2017 19:27:53 +0000 (03:27 +0800)]
adb: fix package description
Signed-off-by: Matt Mets <matt@blinkinlabs.com>
Mathew McBride [Tue, 24 Oct 2017 00:49:00 +0000 (11:49 +1100)]
layerscape: reverse changes to ndo_get_stats64
The NXP LSDK kernel backported changes for interface ndo_get_stats64
functions from mainline, this causes a compile error with
backports/mac80211, which expects the original 4.9 defintion.
As reversing the ndo_get_stats64 change signifcantly reduces the size of
patch 601, the patches that were aggregated into it have been
disaggregated.
Signed-off-by: Mathew McBride <matt@traverse.com.au>
Mathew McBride [Fri, 13 Oct 2017 04:23:07 +0000 (15:23 +1100)]
layerscape: Remove netfilter and LZ4 config symbols
These conflict with the kmod packages (such as nf-netlink)
Signed-off-by: Mathew McBride <matt@traverse.com.au>
[Add same changes for arm8_32b subtarget and refresh config]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hans Dedecker [Sat, 28 Oct 2017 11:42:28 +0000 (13:42 +0200)]
arc770: mark as source-only
Mark target arc770 as source-only as it has package compile issues
(e.g. iproute2) due to the usage of uClibc.
As a prerequisite to be included in future releases the arc770 target
needs to switch either to glibc or musl.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jonas Gorski [Sat, 28 Oct 2017 09:57:39 +0000 (11:57 +0200)]
build: actually fix the creation of PKG_INFO_DIR
The creation was accidentally moved to the wrong hook, fix it by moving
it to the pre hook.
Fixes:
e5e5c3f5fd38 ("build: ensure PKG_INFO_DIR exists before trying to use it")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sat, 28 Oct 2017 09:19:25 +0000 (11:19 +0200)]
build: ensure PKG_INFO_DIR exists before trying to use it
PKG_INFO_DIR is only created at the finish step of the first package
build, but kernel modules now use it at the start. Doing a parallel build
could cause a kernel module to be the first package, breaking the build.
Fix this by ensuring the directory exists.
Fixes:
2e496876c60c ("kernel: collect module symvers for external modules")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sun, 27 Aug 2017 18:03:58 +0000 (20:03 +0200)]
mwlwifi: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Mon, 24 Jul 2017 09:16:21 +0000 (11:16 +0200)]
mt76: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Mon, 24 Jul 2017 11:14:20 +0000 (13:14 +0200)]
mac80211: ath10k: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sun, 27 Aug 2017 18:01:51 +0000 (20:01 +0200)]
broadcom-wl: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Fri, 21 Jul 2017 14:23:06 +0000 (16:23 +0200)]
broadcom-wl: reorder kmod build and pass EXTRA_VERSIONS
Reoder the build to build the glue module first and pass the glue module's
Module.symvers to the wl driver builds.
This allows modpost to properly store a wl_glue dependency in the driver.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Fri, 21 Jul 2017 13:46:35 +0000 (15:46 +0200)]
broadcom-wl: define module directories
Define the module subdirs so our build system properly picks up the
Module.symvers.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Mon, 24 Jul 2017 11:11:33 +0000 (13:11 +0200)]
ath10k-ct: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Fri, 21 Jul 2017 13:20:12 +0000 (15:20 +0200)]
ath10k-ct: define module directories
Define the module subdir so our buildsystem properly picks up the
Module.symvers.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Mon, 24 Jul 2017 11:12:54 +0000 (13:12 +0200)]
acx-mac80211: drop PKG_BUILD_DEPENDS
We already have a DEPENDS on mac80211, which should be enough to ensure
headers are available before build.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Mon, 24 Jul 2017 11:12:28 +0000 (13:12 +0200)]
acx-mac80211: switch to AutoProbe
Now that we have working module dependency generation, we can switch to
AutoProbe and let modprobe handle loading required modules.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Thu, 20 Jul 2017 20:34:54 +0000 (22:34 +0200)]
kernel: collect module symvers for external modules
Collect module symvers for all external modules to make them available
for modpost. This fixes dependencies for most external modules.
Example:
Before:
root@LEDE:/# modinfo mt76
module: /lib/modules/4.4.74/mt76.ko
license: Dual BSD/GPL
depends:
After:
root@LEDE:/# modinfo mt76
module: /lib/modules/4.4.74/mt76.ko
license: Dual BSD/GPL
depends: mac80211,cfg80211
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jo-Philipp Wich [Fri, 27 Oct 2017 09:37:11 +0000 (11:37 +0200)]
Revert "wpa_supplicant: log to syslog instead of stdout"
This reverts commit
e7373e489d8a215402d6b0c408a26188342c7c17.
Support of "-s" depends on the CONFIG_DEBUG_SYSLOG compile time flag which
is not enabled for all build variants.
Revert the change for now until we can properly examine the size impact of
CONFIG_DEBUG_SYSLOG.
Fixes FS#1117.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Edmunt Pienkowsky [Sat, 21 Oct 2017 09:07:43 +0000 (11:07 +0200)]
ramips: fix Youku-YK1 support
Remove the ephy-pins from the ethernet device tree node. The ephy-pins
are useed to controll the ePHY LEDs and this board doesn't have these.
Instead one of the ePHY pins is used in GPIO mode to control the WAN
LED.
Use the switch LED trigger to control the WAN LED. Move the power LED
handling to diag.sh to show the boot status via this LED.
Add the missing kernel packages for USB and microSD card reader to the
default package selection.
Fix the maximum image size value. The board has a 32MByte flash chip.
Fixes: FS#1055
Signed-off-by: Edmunt Pienkowsky <roed@onet.eu>
[make the commit message more verbose, remove GPIO pinmux for pins not
used as GPIOs]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Alex Maclean [Mon, 23 Oct 2017 12:48:19 +0000 (13:48 +0100)]
tools/squashfs4: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Fixes: FS#1017
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
[refresh patches]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Alex Maclean [Mon, 23 Oct 2017 12:47:55 +0000 (13:47 +0100)]
tools/squashfs: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Fixes: FS#1018
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
Alex Maclean [Mon, 23 Oct 2017 12:47:33 +0000 (13:47 +0100)]
tools/mtd-utils: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Fixes: FS#1015
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
[refresh patches]
Signed-off-by: Mathias Kresin <dev@kresin.me>
Alex Maclean [Mon, 23 Oct 2017 12:43:43 +0000 (13:43 +0100)]
tools/findutils: include sysmacros.h explicitly
glibc is moving to remove the include of sys/sysmacros.h from
sys/types.h, and some distros have done this early. Other libcs may
already lack this include. Include sysmacros.h explicitly.
Fixes: FS#1016
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
Jo-Philipp Wich [Fri, 27 Oct 2017 01:25:29 +0000 (03:25 +0200)]
mdadm: fix parameter quoting
Ensure that path defines are passed quoted to the compiler in order
to avoid cpp syntax errors.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Rosen Penev [Tue, 17 Oct 2017 16:28:39 +0000 (09:28 -0700)]
mdadm: Fix config generation
The init script generated something like "DEVICE=/dev/sda" when it should
have been generating "DEVICE /dev/sda". mdadm errors on this. Patch by jow.
Also changed the default sendmail path to /usr/sbin/sendmail. No package
in LEDE provides /sbin/sendmail. msmtp provides /usr/sbin/sendmail so use
that.
Also add a patch to fix file paths for mdadm runtime files. mdadm currently
errors on them since /run is missing. Once /run is added to stock LEDE, this
patch can be removed.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[rewrap commit message]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Martin Wetterwald [Thu, 12 Jan 2017 14:06:00 +0000 (15:06 +0100)]
iptables: Fix target TRACE issue
The package kmod-ipt-debug builds the module xt_TRACE, which allows
users to use '-j TRACE' as target in the chain PREROUTING of the table
raw in iptables.
The kernel compilation flag NETFILTER_XT_TARGET_TRACE is also enabled so
that this feature which is implemented deep inside the linux IP stack
(for example in sk_buff) is compiled.
But a strace of iptables -t raw -I PREROUTING -p icmp -j TRACE reveals
that an attempt is made to read /usr/lib/iptables/libxt_TRACE.so, which
fails as this dynamic library is not present on the system.
I created the package iptables-mod-trace which takes care of that, and
target TRACE now works!
https://dev.openwrt.org/ticket/16694
https://dev.openwrt.org/ticket/19661
Signed-off-by: Martin Wetterwald <martin.wetterwald@corp.ovh.com>
[Jo-Philipp Wich: also remove trace extension from builtin extension list
and depend on kmod-ipt-raw since its required for rules]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Tested-by: Enrico Mioso <mrkiko.rs@gmail.com>
Rosen Penev [Sun, 15 Oct 2017 00:07:19 +0000 (17:07 -0700)]
kernel: enable CONFIG_ADVISE_SYSCALLS
Without this, posix_[fm]advise does not work. This causes issues with
btrfs-progs, which uses fadvise to drop caches.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Henryk Heisig [Mon, 3 Jul 2017 21:59:54 +0000 (23:59 +0200)]
ath10k-firmware: qca9888 firmware: remove board.bin
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Henryk Heisig [Thu, 29 Jun 2017 13:38:22 +0000 (15:38 +0200)]
ar71xx: fix board.bin used by QCA9886 in Archer C58/C59/C60
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Jonas Gorski [Thu, 26 Oct 2017 13:31:15 +0000 (15:31 +0200)]
mac80211: backport fixes for fix for CVE-2017-13080
Backport two fixes for the fix of CVE-2017-13080, preventing side channel
attacks and making it work for TKIP.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Henryk Heisig [Thu, 29 Jun 2017 13:20:31 +0000 (15:20 +0200)]
ar71xx: Archer C58/C59/C60 fix qca9886 wireless interface
This commit fix 5GHz wireless interface used in Archer C58/C59/C60v1
and set correctly MAC address on this interface.
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Jonas Gorski [Fri, 13 Oct 2017 12:21:53 +0000 (14:21 +0200)]
treewide: do not use IMG_PREFIX in Image/Prepare
IMG_PREFIX can be modified in ImageBuilder by passing EXTRA_IMAGE_NAME
on command line, but Image/Prepare is not run in ImageBuilder. This
causes missing files when IMG_PREFIX is used for target file names in
Image/Prepare, then as source file names in Image/BuildKernel or
Image/Build.
Fix this by using a fixed output file name in Image/Prepare, and copy to
the expected file name in Image/BuildKernel instead, which is run by
ImageBuilder.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
John Crispin [Sat, 21 Oct 2017 20:02:31 +0000 (22:02 +0200)]
hostapd: fix up ubus support
Signed-off-by: John Crispin <john@phrozen.org>
Kevin Darbyshire-Bryant [Wed, 25 Oct 2017 08:21:35 +0000 (09:21 +0100)]
ramips: remove erroneous "wdt rst" DTS entries
Remove reference to pinmux group "wdt rst" on EW1200, ZBT-WG2626 and
ZBT-WG3526 devices. "wdt rst" is a pinmux function and not a pinmux
group.
Fixes the following error message during boot:
rt2880-pinmux pinctrl: invalid group "wdt rst" for function "gpio"
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Kevin Darbyshire-Bryant [Wed, 25 Oct 2017 09:39:23 +0000 (10:39 +0100)]
ltq-xdsl-app: script style nit
Fix missing space style nit.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Tolga Cakir [Tue, 24 Oct 2017 20:03:33 +0000 (22:03 +0200)]
ipq806x: fix Zyxel NBG6817 WiFi button
Zyxel NBG6817 features a WiFi button, which becomes functional by setting
correct GPIO. It is a switch-type button, so it emits KEY_RFKILL on each ON
and OFF state. This is achieved by setting input-type to EV_SW.
Signed-off-by: Tolga Cakir <tolga@cevel.net>
Paul Wassi [Tue, 24 Oct 2017 12:23:58 +0000 (14:23 +0200)]
ar71xx: fix LED names for GL-AR150
Add the respective colour to the LED's names for the GL-AR150 to be conform
to the kernel. Also add netdev triggers for the LAN and WAN LED.
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Paul Wassi [Tue, 24 Oct 2017 08:58:39 +0000 (10:58 +0200)]
ar71xx: base-files: alphabetical reordering
Re-order the cases of base-files/* alphabetically.
Also merge some cases in diag.sh
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
Mathias Kresin [Tue, 24 Oct 2017 04:57:29 +0000 (06:57 +0200)]
mpc85xx: use image metadata
Append and enforce image metadata. Remove the device specific image
checks, they are replaced by image metadata.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Mon, 15 May 2017 21:59:25 +0000 (23:59 +0200)]
mpc85xx: use the generic board detect
Use the values populated by the generic board detect function. The
first compatible from the device tree source file will be the board
name in userspace. The model property from the device tree source file
will be the model name.
Change the board name where used in the userspace and drop the target
specific board detect, to use the generic one.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Mon, 15 May 2017 21:52:02 +0000 (23:52 +0200)]
mpc85xx: fix TL-WDR4900 v1 compatible string
Use the vendor as it is listed in vendor.txt. Use a standard lower case
compatible string.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Chris Blake [Fri, 20 Oct 2017 15:32:37 +0000 (10:32 -0500)]
mpc85xx: update HiveAP-330 dts
initramfs is not the proper name for this, as it stores a boot ramdisk
and not a filesystem. Update the name to reflect it's usage correctly.
If CMDLINE_OVERRIDE is enabled, the chosen bootargs aren't used at all.
Drop them from the device tree source file to not cause confusion.
Remove the noinitrd bootarg. Due to the empty ramdisk this parameter
isn't required any longer:
[ 0.000000] Initrd not found or empty - disabling initrd
Use the LEDE mtd-mac-address* device tree properties to set the interfaces
MAC-Addresses.
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 21 Oct 2017 13:44:30 +0000 (15:44 +0200)]
mpc85xx: cleanup kernel config
Move the kernel config changes added with the HiveAP 330 to the
subtarget the board belongs to instead of changing the target kernel
config.
While at it, move the TL_WDR4900_V1 config symbol to the containing
subtarget and disable boards we don't support.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Chris Blake [Fri, 20 Oct 2017 17:36:25 +0000 (12:36 -0500)]
mpc85xx: use new build code style
The following moves the mpc85xx target (generic & P1020) to the new
build code style.
Compile & Flash tested on an Aerohive HiveAP-330.
Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Mon, 23 Oct 2017 06:17:44 +0000 (08:17 +0200)]
ramips: don't enable usb for the WT3020-4M
That device does not have a USB port. It as the same board as the
WT3020-8M, but without soldered USB port port. Also the case lacks the
opening for the port.
Reported-by: Alberto Bursi <alberto.bursi@outlook.it>
Signed-off-by: Mathias Kresin <dev@kresin.me>
Alberto Bursi [Sat, 21 Oct 2017 21:53:49 +0000 (23:53 +0200)]
ramips: fix default usb support for nexx wt3020-8M
the nexx wt3020-8M has a usb 2.0 port,
add usb 2.0 support packages to its default package list.
Signed-off-by: Alberto Bursi <alberto.bursi@outlook.it>
Mathias Kresin [Mon, 16 Oct 2017 19:08:26 +0000 (21:08 +0200)]
ltq-adsl-app: add more script notifications
Backport HANDSHAKE and TRAINING notification from ltq-vdsl-app. It
unifies the dsl led blinking pattern accross all subtargets and allows
to get the current line status from the dsl led.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 15 Oct 2017 10:34:33 +0000 (12:34 +0200)]
ltq-atm: remove xrx200 special handling
The lantiq ATM driver is load for all subtargets on demand now. There
is not need to handle the xrx200 ATM driver in a special way any
longer.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 14 Oct 2017 18:52:22 +0000 (20:52 +0200)]
lantiq: xway: rename nas0/ptm0 to dsl0
This change makes it possible to configure the wan/dsl ppp interface
settings independantly from the used TC-Layer (ATM/PTM).
By using dsl0 as interface name as for the xrx200 we can get rid of a
few conditionals which were introduced because of the different default
TC-Layer in xway and xrx200.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 15 Oct 2017 10:29:22 +0000 (12:29 +0200)]
ltq-adsl-app: use notification based ATM/PTM driver load
This patch removes the fixed atm/ptm driver loading and
switches to notification based driver loading.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 15 Oct 2017 08:33:29 +0000 (10:33 +0200)]
ltq-adsl-app: convert init script to procd
Use the procd features for the init script.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Mon, 16 Oct 2017 21:25:04 +0000 (23:25 +0200)]
lantiq: match default adsl annex and firmware
Set a default Annex matching the the annex of the selected adsl
firmware.
Set Annex B for xrx200 board which are known to have an ADSL hybrid for
Annex B.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Wed, 25 Oct 2017 06:32:00 +0000 (08:32 +0200)]
lantiq: add missing default lan interface
With removing the boards from the the default case to fix the xDSL WAN
MAC-Address, the setting for the default LAN interface wasn't added.
Fixes:
92a12c434ca3 ("lantiq: fix avm fritz box mac addresses")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Florian Fainelli [Wed, 25 Oct 2017 01:08:25 +0000 (18:08 -0700)]
bcm53xx: Fix Generic profile description
Fix the sentence describing the bcm53xx generic profile.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Wed, 25 Oct 2017 00:46:15 +0000 (17:46 -0700)]
orion: Switch to 4.9 kernel
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Wed, 25 Oct 2017 00:46:02 +0000 (17:46 -0700)]
orion: Add support for 4.9 kernel
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Tue, 24 Oct 2017 23:59:15 +0000 (16:59 -0700)]
include: Silence external kernel version checks
During the initial configuration phases, we have not set-up the kernel
source directory, which would lead to such messages:
cat:
/local/users/fainelli/openwrt/trunk/build_dir/target-x86_64_musl/linux-uml/linux-4.9.58/include/config/kernel.release:
No such file or directory
Just silence it, since it does not create a functional problem.
Fixes:
8e0e0e7d8bfb ("include: Determine MODULES_DIR correctly for external/git kernels")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Tue, 24 Oct 2017 22:10:05 +0000 (15:10 -0700)]
uml: Switch to 4.9 kernel
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Sun, 22 Oct 2017 21:56:12 +0000 (14:56 -0700)]
uml: Add 4.9 kernel patches
102-pseudo-random-mac.patch required an update to the new style asynchronous
crypto
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Hans Dedecker [Tue, 24 Oct 2017 20:08:54 +0000 (22:08 +0200)]
pending-4.9: 610-netfilter_match_bypass_default_check: fix 32bit compat layer
Patch 610-netfilter_match_bypass_default_check added an extra flag IPT_F_NO_DEF_MATCH
which is copied to user space in function copy_entries_to_user. The 32bit compat
layer function was missing the same logic to copy the flag IPT_F_NO_DEF_MATCH to
user space for a 64bit kernel and 32 bit user space.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Thierry Dutre <thierry.dutre@dtsystems.be>
Hans Dedecker [Mon, 16 Oct 2017 09:29:55 +0000 (11:29 +0200)]
pending-4.4: 610-netfilter_match_bypass_default_check: fix 32bit compat layer
Patch 610-netfilter_match_bypass_default_check added an extra flag IPT_F_NO_DEF_MATCH
which is copied to user space in function copy_entries_to_user. The 32bit compat
layer function was missing the same logic to copy the flag IPT_F_NO_DEF_MATCH to
user space for a 64bit kernel and 32 bit user space.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Thierry Dutre <thierry.dutre@dtsystems.be>
Hans Dedecker [Tue, 24 Oct 2017 14:46:53 +0000 (16:46 +0200)]
pending-3.18: 610-netfilter_match_bypass_default_check: fix 32bit compat layer
Patch 610-netfilter_match_bypass_default_check added an extra flag IPT_F_NO_DEF_MATCH
which is copied to user space in function copy_entries_to_user. The 32bit compat
layer function was missing the same logic to copy the flag IPT_F_NO_DEF_MATCH to
user space for a 64bit kernel and 32 bit user space.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Thierry Dutre <thierry.dutre@dtsystems.be>
Felix Fietkau [Tue, 24 Oct 2017 11:22:09 +0000 (13:22 +0200)]
tools/squashfs: use host cflags
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 24 Oct 2017 10:33:46 +0000 (12:33 +0200)]
ar71xx: re-enable 4k sectors for the mikrotik subtargets
On RB91x (and possibly others), there is a small SPI flash to store boot
loader and configuration. It needs 4K sectors to be able to write the
configuration using rbcfg
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 24 Oct 2017 10:30:48 +0000 (12:30 +0200)]
ar71xx: fix mikrotik routerboard nand driver issues with linux 4.9
The mtd device is now embedded inside the nand chip data structure
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 24 Oct 2017 08:32:21 +0000 (10:32 +0200)]
ar71xx: fix secondary gpio controller base values
In 4.9, gpio count is rounded up to 32 due to the use of bgpio in the
ath79 gpio controller driver.
Fix base values in mach files to account for that
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Julien Dusser [Wed, 19 Jul 2017 13:45:08 +0000 (15:45 +0200)]
ar71xx: lzma loader use LTO
Change the Makefile to use LTO for better code optimisations. Gains are
very low, only 270 bytes saved, but it's only Makefile changes.
Signed-off-by: Julien Dusser <julien.dusser@free.fr>
Julien Dusser [Wed, 19 Jul 2017 12:52:35 +0000 (14:52 +0200)]
ar71xx: fix lzma loader performance issues
Some bootloaders set a cache cohenrency to a very slow mode. Use code from
Linux kernel to set it to "Cacheable, noncoherent, write-back, write
allocate".
Perfomance impact is significant on TP-Link EAP245 board, kernel
decompression time fall from 33 seconds to less than 1.
Signed-off-by: Julien Dusser <julien.dusser@free.fr>
Stefan Oberhumer [Wed, 31 May 2017 05:37:03 +0000 (07:37 +0200)]
libs/lzo: Reenable unaligned access on ARM, PPC, ...
Due a compiler bug on ARM targets
( https://gcc.gnu.org/bugzilla/show_bug.cgi?id=64516 )
unaligned access was disabled on all targets other than i386 and
x86_64 with commit
061319ec3dfe9b6d14af1286a1d9979db56048d7 .
A fix has been added to lzo-2.09 so it is not necessary to disable
unaligned access within the Makefile anymore.
Signed-off-by: Stefan Oberhumer <stefan@obssys.com>
Florian Larysch [Thu, 3 Nov 2016 12:58:24 +0000 (13:58 +0100)]
kernel: fixup KARCH for powerpc64 builds
The kernel calls both ppc64 and ppc32 "powerpc", so we need to fixup
LINUX_KARCH when building with ARCH=powerpc64.
Signed-off-by: Florian Larysch <fl@n621.de>
Florian Larysch [Thu, 3 Nov 2016 12:46:23 +0000 (13:46 +0100)]
config: set ARCH if powerpc64 is selected in the configuration
Signed-off-by: Florian Larysch <fl@n621.de>
Florian Larysch [Thu, 3 Nov 2016 14:54:19 +0000 (15:54 +0100)]
target: add cpu flags for powerpc64
Signed-off-by: Florian Larysch <fl@n621.de>
Florian Larysch [Thu, 3 Nov 2016 13:30:40 +0000 (14:30 +0100)]
toolchain: use glibc for powerpc64 builds
Neither uClibc nor musl currently have working support for powerpc64 in
big endian mode. Thus, default to using glibc for this architecture.
Signed-off-by: Florian Larysch <fl@n621.de>
Florian Larysch [Thu, 3 Nov 2016 13:30:53 +0000 (14:30 +0100)]
toolchain: remove powerpc64 feature
The powerpc64 feature flag was introduced with the PS3 support, which
has been removed for quite a while and is now unused. Remove it and the
special biarch handling it triggered during the toolchain build.
Signed-off-by: Florian Larysch <fl@n621.de>
Florian Larysch [Thu, 3 Nov 2016 12:45:58 +0000 (13:45 +0100)]
include/site: add powerpc64 config
Signed-off-by: Florian Larysch <fl@n621.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Florian Fainelli [Sat, 14 Oct 2017 20:24:07 +0000 (13:24 -0700)]
uboot-sunxi: Backport fix for stale CONFIG_SUNXIG_GMAC references
This backports the upstream commit fixing stale references to
CONFIG_SUNXI_GMAC which have been later replaced by CONFIG_SUN7I_GMAC.
This fixes the designware MAC pinmuxing on e.g: Lamobo R1.
Refresh patches while we are at it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Tue, 10 Oct 2017 03:50:27 +0000 (20:50 -0700)]
bcm53xx: Fix SmartRG SR400AC initramfs image
The SmartRG SR400AC CFE does not accept a TRX image, just a normal
binary image.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Florian Fainelli [Tue, 10 Oct 2017 03:33:34 +0000 (20:33 -0700)]
include: Include new location for DT bindings
Starting with commit
d5d332d3f7e8 ("devicetree: Move include prefixes
from arch to separate directory") included in 4.12 and newer relocated
the dt-bindings directory, so account for that while passing CPPFLAGS
before DTC runs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Stijn Tintel [Sun, 22 Oct 2017 11:00:42 +0000 (14:00 +0300)]
kernel: bump 4.9 to 4.9.58
Refresh patches.
Compile-tested: ar71xx, octeon, x86/64.
Runtime-tested: octeon, x86/64.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 18 Oct 2017 17:17:56 +0000 (20:17 +0300)]
kernel: add kmod-iio-bmp280
This driver supports the Bosch Sensortec BMP180/BMP280 pressure and
temperature sensors. It also supports the BME280 sensors with an
additional humidity channel.
Tested I2C and SPI modes with a BME280 sensor on a Raspberry Pi Zero W.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Wed, 18 Oct 2017 17:13:27 +0000 (20:13 +0300)]
kernel: move IIO modules to iio.mk
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Sat, 21 Oct 2017 11:51:14 +0000 (14:51 +0300)]
brcm2708: restore /boot/config.txt before reboot
The Raspberry Pi bootloader reads configuration values from config.txt
in the boot partition. This file allows to specify the amount of memory
to assign to the GPU, the license keys for hardware MPEG-2 and VC-1
decoding, Device Tree parameters and overlays, and lots of other things.
Since sysupgrade only restores the configuration after booting the newly
flashed image, these values will not be active, even if sysupgrade would
save /boot/config.txt. To solve this, add the file to the files to be
backed up, and restore it in platform_copy_config, before reboot.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Hauke Mehrtens [Sun, 22 Oct 2017 21:10:08 +0000 (23:10 +0200)]
ar71xx: deactivate some boards with too small kernel partitions
This affects the following boards:
* dr344
* archer-c58-v1
* archer-c60-v1
* tl-wr902ac-v1
* tl-wr942n-v1
* ubnt-uap-pro
* ubnt-unifi-outdoor-plus
The build fails for any of these boards because the resulting kernel
image will not fit into the kernel partition.
When CONFIG_KERNEL_KALLSYMS is not set it could be that the kernel will
fit onto the board again, this is the case for release images.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 22 Oct 2017 13:20:39 +0000 (15:20 +0200)]
ar71xx: use kernel 4.9 by default
Kernel 4.9 support was added about 2 weeks ago and we haven't seen any
major regression so far. This patch was not ported to kernel 4.9, this
needs some additional work:
821-serial-core-add-support-for-boot-console-with-arbitr.patch
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>