Merge branch 'master' of git://denx.de/git/u-boot-net

Merge branch 'master' of git://denx.de/git/u-boot-sh

Allow print_size to print in GB

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

sh: Fix compile error sh7763rdp board

Disable SH ether driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Fix SH-boards compile error

By Cleanup out-or-tree building for some boards (.depend)
(commit:c8a3b109f07f02342d097b30908965f7261d9f15)
because filse ware changed, some SH-boards have compile error.
I revised this problem.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

Remove duplicate code in cpu/arm926ejs/davinci/lxt972.c.

Remove duplicate code in a if/else block in
cpu/arm926ejs/davinci/lxt972.c.
Fixed style issues.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Remove duplicate definitions in include/lxt971a.h.

Remove duplicate definitions in include/lxt971a.h.

Remove duplicate registers and bits definitions in
include/lxt971a.h for standard MII registers, and
use values in include/miiphy.h instead.

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

net: sh: Renesas SH7763 Ethernet device support

Renesas SH7763 has 2 channel Ethernet device.
This is 10/100/1000 Base support.
But this patch check 10/100 Base only.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

sh: Update Renesas R2DPlus board

New NOR Flash board support and remove old type flash board config.
And Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Renesas R7780MP board

New NOR Flash board support and remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Renesas Migo-R board

Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Update Hitachi MS7722SE board

Remove network setting from config file.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of SH7763RDP

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of R2DPlus

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of R7780MP

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of MS7722SE

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

sh: Cleanup source code of MS7720SE

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-at91

SH: fix out of tree building

Signed-off-by: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-avr32

Merge branch 'master' of /home/wd/git/u-boot/custodians

Merge branch 'master' of git://denx.de/git/u-boot-mpc83xx

net: smc911x: Fix typo

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>

update mvBL-M7 board config

update mvBL-M7 config file to use UBOOT_VERSION and define
CONFIG_HIGH_BATS.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>

net: fix compile problem in smc911x driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Acked-by: Ben Warren <biggerbadderben@gmail.com>

ppc4xx: Rename CONFIG_XILINX_ML300 to CONFIG_XILINX_405

This change helps with better handling with others
Xilinx based platform.

Signed-off-by: Michal Simek <monstr@monstr.eu>
Acked-by: Stefan Roese <sr@denx.de>

net: ne2000: Move dev_addr variable from grobal to local.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

net: ne2000: Fix compile error of NE2000

If enable DEBUG, can not compile ne2000 driver.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

Add mechanisms for CPU and board-specific Ethernet initialization

This patch is the first step in cleaning up net/eth.c, by moving Ethernet
initialization to CPU or board-specific code.  Initial implementation is
only on the Freescale TSEC controller, but others will be added soon.

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

include/sha256.h: fix file permissions.

Signed-off-by: Wolfgang Denk <wd@denx.de>

Merge branch 'master' of ssh+git://mercury.denx.de/home/wd/git/u-boot/master

Conflicts:

board/amirix/ap1000/serial.c
board/exbitgen/exbitgen.c
board/exbitgen/flash.c
board/ml2/serial.c
board/xilinx/ml300/serial.c

Signed-off-by: Wolfgang Denk <wd@denx.de>

[AT91SAM9] Fix NAND FLASH timings

Fix NAND FLASH timings for at91sam9x evaluation kits.

New timings are based on application note
"NAND Flash Support on AT91SAM9 Microcontrollers" available at
http://atmel.com/dyn/resources/prod_documents/doc6255.pdf

Signed-off-by: Patrice Vilchez <patice.vilchez@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Stelian Pop <stelian@popies.net>

Fix boot from NOR due to incorrect reset delay.

AT91 RSTC registers are battery-backuped, so their values
are not reset across power cycles. One of those registers,
the AT91_RSTC_MR register, is being modified by U-Boot, in
the ethernet initialisation routine, to generate a 500ms
user reset.

Unfortunately, this value is not being restored afterwards,
causing subsequent resets to also last for 500ms.

This long reset sequence causes problems (at least) in the
boot sequence from NOR: by the time the CPU tries to load
a program from the NOR flash, the latter is still in reset
and not yet available.

Additionaly, this patch fixes a bug in the original code which
caused the reset delay to last for 2s instead of 500ms.

Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

CCM/SCM boards: fix out of tree building

Signed-off-by: Wolfgang Denk <wd@denx.de>

SCM board: fix build errors.

Signed-off-by: Wolfgang Denk <wd@denx.de>

IAD210 board: fix ``"ALIGN" redefined'' warning.

Signed-off-by: Wolfgang Denk <wd@denx.de>

CCM board: fix build errors.

Signed-off-by: Wolfgang Denk <wd@denx.de>

update mvBL-M7 board config

update mvBL-M7 config file to use UBOOT_VERSION.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

sacsng board: fix warnings "suggest explicit braces to avoid ambiguous 'else'"

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: fix "expected specifier-qualifier-list before 'phys_size_t'" errors

Signed-off-by: Wolfgang Denk <wd@denx.de>

lmb: fix "implicit declaration of function 'lmb_free'" warning

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: remove redundant deleting on *~ files

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup out-or-tree building for some boards (.depend)

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: fix out-of-tree building for some boards

Signed-off-by: Wolfgang Denk <wd@denx.de>

Cleanup: replace hard-wired $(AR) 'crv' settings by $(ARFLAGS)

Signed-off-by: Wolfgang Denk <wd@denx.de>

fdt: Fix typo in variable name.

Signed-off-by: Detlev Zundel <dzu@denx.de>

Add logos for RRvision board

Signed-off-by: Gary Jennejohn <garyj@denx.de>

mpc8260: add fdt_fixup_ethernet support

Add support for updating mac-address and local-mac-address in fdt for
all MPC8260 targets.

Signed-off-by: Esben Haabendal <eha@doredevelopment.dk>

cmd_nvedit.c: clean up syntax highlighting

My text-editor (vim) has a bit of trouble syntax-highlighting the
cmd_nvedit.c file, because it apparently does not parse C
ifdef/else/endif. The following patch does not change the behavior of
the code at all, but does allow the editor to properly
syntax-highlight the file.

Signed-off-by: Steve Falco <sfalco@harris.com>

Make setenv() return status

Currently, the setenv function does not return an error code.
This patch allows to test for errors.

Signed-off-by: Steve Falco <sfalco@harris.com>

PPC: Added fls, fls64, __ilog2_u64, and ffs64 to bitops

fls64, __ilog2_u64, ffs64 are variants that work on an u64,
and fls is used to implement them.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

i.MX31: Cleanup comments in lowlevel_init.S.

Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>

Move conditional compilation of MPC8XXX SPI driver to Makefile

Signed-off-by: Ben Warren <biggerbadderben@gmail.com>

i.MX31: fixed CTRL-C detection

The Register URXD contains status information in bits [15..8].
With status bit 15 set, CTRL-C was reported as 0x8003 instead
of 0x03. Therefore CTRL-C was not detected.
To solve this, bits [15..8] were masked out now.

Signed-off-by: Juergen Kilb <J.Kilb@gmx.de>
Acked-by: Felix Radensky <felix@embedded-sol.com>

add SHA256 support

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Francesco Albanese <Francesco.Albanese@swisscom.com>

Delay FIT format check on sector based devices

Global FIT image operations like format check cannot be performed on
a first sector data, defer them to the point when whole FIT image was
uploaded to a system RAM.

Signed-off-by: Marian Balakowicz <m8@semihalf.com>
Partial ('cmd_nand' case) Acked-by: Grant Erickson <gerickson@nuovations.com>
NAND and DOC bits Acked-by: Scott Wood <scottwood@freescale.com>

sata: wait for device updating signature to host

The driver need wait for the device updating signature to host.
If we don't wait for it, the driver can not detect the device(disk)
when the system powers up.

Signed-off-by: Dave Liu <daveliu@freescale.com>

Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx

ppc4xx: Fix 460EX errata with CPU lockup upon high AHB traffic

This patch implements a fix provided by AMCC so that the lockup upon
simultanious traffic on AHB USB OTG, USB 2.0 and SATA doesn't occur
anymore:

Set SDR0_AHB_CFG[A2P_INCR4] (bit 24) and clear SDR0_AHB_CFG[A2P_PROT2]
(bit 25) for a new 460EX errata regarding concurrent use of AHB USB OTG,
USB 2.0 host and SATA.

This errata is not officially available yet. I'll update the comment
to add the errata number later.

Signed-off-by: Stefan Roese <sr@denx.de>

serial_pl010.c: add watchdog support

Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>

jffs2_1pass.c: add watchdog support

Signed-off-by: Stuart Wood <stuart.wood@labxtechnologies.com>

Configure DSP POST; add watchdog reset to diag command

Signed-off-by: Sascha Laue <sascha.laue@liebherr.com>

Add sata sil3114 support

Signed-off-by: Tor Krill <tor@excito.com>

Coding Style Cleanup

Signed-off-by: Wolfgang Denk <wd@denx.de>

Update CHANGELOG

Signed-off-by: Wolfgang Denk <wd@denx.de>

ARM: Add support for Lyrtech SFF-SDR board (ARM926EJS)

This patch adds support for the Lyrtech SFF-SDR board,
based on the TI DaVinci architecture (ARM926EJS).

Signed-off-by: Hugo Villeneuve <hugo.villeneuve@lyrtech.com>
Signed-off-by: Philip Balister <philip@balister.org>
Signed-off-by: Wolfgang Denk <wd@denx.de>

MMC: Consolidate MMC/SD command definitions

This moves the MMC and SD Card command definitions from
include/asm/arch/mmc.h into include/mmc.h. These definitions are
given by the MMC and SD Card standards, not by any particular
architecture.

There's a lot more room for consolidation in the MMC drivers which
I'm hoping to get done eventually, but this patch is a start.

Compile-tested for all avr32 boards as well as lpc2292sodimm and
lubbock. This should cover all three mmc drivers in the tree.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Use better Ethernet timings for apollon board

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

Resize device tree to allow space for board changes and the chosen node

Current code requires that a compiled device tree have space added to the end to
leave room for extra nodes added by board code (and the chosen node).  This
requires that device tree creators anticipate how much space U-Boot will add to
the tree, which is absurd.  Ideally, the code would resize and/or relocate the
tree when it needed more space, but this would require a systemic change to the
fdt code, which is non-trivial.  Instead, we resize the tree inside
boot_relocate_fdt, reserving either the remainder of the bootmap (in the case
where the fdt is inside the bootmap), or adding CFG_FDT_PAD bytes to the size.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Fix an underflow bug in __lmb_alloc_base

__lmb_alloc_base can underflow if it fails to find free space.  This was fixed
in linux with commit d9024df02ffe74d723d97d552f86de3b34beb8cc.  This patch
merely updates __lmb_alloc_base to resemble the current version in Linux.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Add lmb_free

lmb_free allows us to unreserve some memory so we can use lmb_alloc_base or
lmb_reserve to temporarily reserve some memory.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Add ALIGN() macro

ALIGN() returns the smallest aligned value greater than the passed
in address or size.  Taken from Linux.

Signed-off-by: Andy Fleming <afleming@freescale.com>

ppc4xx: Fix compilation problems with phys_size_t

This patch includes <asm/types.h> before <asm/u-boot.h> in some 4xx
board specific files where it has been missing.

Signed-off-by: Stefan Roese <sr@denx.de>

Conditionally add -fno-stack-protector to CFLAGS

When compile-testing on powerpc, I get errors like this:

net/nfs.c:422: undefined reference to `__stack_chk_fail_local'

This seems to be because -fstack-protector is on by default, so
let's explicitly disable it on all architectures that support the
option.

The Ubuntu toolchain is affected by this problem, and according to
Mike Frysinger, Gentoo has been running with SSP enabled for years.
More and more distros are turning SSP on by default, so this problem
is likely to get worse in the future.

Also, powerpc just happens to be one of the arches I do
compile-testing on. There may be other arches affected by this too.

Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>

pcmcia/ti_pci1410a: Move compile condition to the Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

pxa_pcmcia: Move compile condition to the Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

marabun_pcmcia: Move compile condition to the Makefile

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

fix non-working mvBL-M7

Add missing #define CONFIG_HIGH_BATS in mvBL-M7 board config file.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

fix system config overwrite @ MPC834x and MPC8313

During 83xx setup the "System I/O configuration register high" gets
overwritten with user defined value if CFG_SICRH is defined.

Regarding to the MPC834x manual (Table 5-28 reve.1) bits 28+29 of SICRH
must keep their reset value regardless of configuration.

On my board (using RGMII) those bits are set after reset - yet it's
unclear where they come from.

The patch keeps both bits on MPC834x and MPC8313.

Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

mpc83xx: move CPU_TYPE_ENTRY over to processor.h

to avoid this:

cpu.c:47:1: warning: "CPU_TYPE_ENTRY" redefined
In file included from cpu.c:33:
/home/kim/git/u-boot/include/asm/processor.h:982:1: warning: this is the location of the previous definition

Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

ppc4xx: Fix problem in gpio_config()

As pointed out by Guennadi Liakhovetski (thanks), pin2 is already shifted
left by one. So the additional shift is bogus.

Signed-off-by: Stefan Roese <sr@denx.de>

fdt: Fix typo in variable name.

Signed-off-by: Detlev Zundel <dzu@denx.de>

avr32: Enable SPI flash support on ATNGW100

The ATNGW100 has 8MB DataFlash on board. Give users access to it through
the new SPI flash framework.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

avr32: Fix SPI portmux initialization

Use the new GPIO manipulation functions to set up the chip select lines,
and make sure both busses use GPIO for chip select control.

Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

avr32: Add GPIO manipulation functions

Adds GPIO manipulation functions for AVR32 AP7 platform.

Signed-off-by: Peter Ma <pma@mediamatech.com>
[haavard.skinnemoen@atmel.com: coding style fixup, slight simplification]
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

Merge branch 'master' of git://denx.de/git/u-boot-cfi-flash

Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx

Merge branch 'master' of git://denx.de/git/u-boot-nand-flash

MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver

This patch is based on the following patch sent a few minutes ago:
"NAND FSL UPM: driver re-write using the hwcontrol callback"
It is untested, of course. Anton, could you please give it a try.

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>

Fix 4xx build issue

Building for 4xx doesn't work since commit 4dbdb768:

In file included from 4xx_pcie.c:28:
include/asm/processor.h:971: error: expected ')' before 'ver'
make[1]: *** [4xx_pcie.o] Error 1

This patch fixes the problem.

Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Kumar Gala <galak@kernel.crashing.org>

cfi-flash: Fix problem in flash_toggle(), busy was not detected reliably

This patch simplifies flash_toggle() (AMD commandset), which is used to
detect if a FLASH device is still busy with erase/program operations. On
800MHz Canyonlands/Glacier boards (460EX/GT) the current implementation
did not detect the busy state reliably, resulting in non erased sectors
etc. This patch now simplifies this function by "just" comparing the
complete data-word instead of ANDing it with the command-word (0x40)
before the compatison. It is done the same way in the Linux implementation
chip_ready() in cfi_cmdset_0002.c.

Signed-off-by: Stefan Roese <sr@denx.de>

NAND: Add missing declaration to non-redundant saveenv().

Signed-off-by: Scott Wood <scottwood@freescale.com>

MPC8360ERDK: adapt NAND interface for the re-written FSL NAND UPM driver

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>

ppc4xx: Canyonlands: Disable the RTC M41T62 square wave output

This patch disables the square wave output of the M41T62 RTC used on
Canyonlands & Glacier. Here the explanation:

The serial real-time clock part used in the design is an
STMicro M41T62. This part has a full-time 32KHz square wave
output that is connected to the TmrClk input to the
processor. The default state for this square wave output is
enabled so the output runs continuously when the board is
powered normally and also from the battery. The TmrClk input
to the processor goes to ground when the power is removed
from the board/processor, and therefore the running square
wave output is driving ground which drains the battery quickly.

Signed-off-by: Stefan Roese <sr@denx.de>

Fix build issue with string.h and linux/string.h

This commit:
commit 338cc038461a6c7709c5b86fd9a240209338a1ae
Author: Wolfgang Denk <wd@denx.de>
Date:   Fri Jun 6 14:28:14 2008 +0200

    tools/mkimage: fix compiler warnings on some systems.

Broke building on some systems, because the host's string.h was interfering
with u-boot's linux/string.h.  It doesn't look like we need the u-boot one if
we're building for the host, so now we only include when building inside
u-boot.

Signed-off-by: Andy Fleming <afleming@freescale.com>

Change initdram() return type to phys_size_t

This patch changes the return type of initdram() from long int to phys_size_t.
This is required for a couple of reasons: long int limits the amount of dram
to 2GB, and u-boot in general is moving over to phys_size_t to represent the
size of physical memory.  phys_size_t is defined as an unsigned long on almost
all current platforms.

This patch *only* changes the return type of the initdram function (in
include/common.h, as well as in each board's implementation of initdram).  It
does not actually modify the code inside the function on any of the platforms;
platforms which wish to support more than 2GB of DRAM will need to modify
their initdram() function code.

Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
MPC8641HPCN.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>

Change lmb to use phys_size_t/phys_addr_t

This updates the lmb code to use phys_size_t
and phys_addr_t instead of unsigned long.  Other code
which interacts with this code, like getenv_bootm_size()
is also updated.

Booted on MPC8641HPCN, build-tested ppc, arm, mips.

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>