John Crispin [Tue, 14 Apr 2015 19:00:57 +0000 (19:00 +0000)]
ar71xx: Enable AT803X_PHY to set special flags
Open-Mesh OM5P-AN use a AT8035 (F1E) behind one of the ethernet ports. This PHY
requires special flags to work correctly. Otherwise massive packet loss happens
with active POE or when switching the link speed from gigabit ethernet to fast
ethernet. The generic PHY doesn't have support to change these settings.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45439
John Crispin [Tue, 14 Apr 2015 19:00:51 +0000 (19:00 +0000)]
ar71xx: fix ethernet packet loss issues on OM5P-AN
The OM5P-AN boards are suffering from ethernet packet loss when booting with
some active POE setups or when switching to Fast Ethernet when previously
booted with Gigabit ethernet attached.
The cause of the problem is that the AR8035 PHYs requires special register
settings to work reliably on these boards. Enable the RGMII TX, RX delays and
disable SmartEE functionality of the AR8035 PHYs. Also enable the RXD and RDV
delay in the ETH_CFG register to fix the issue.
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 45438
John Crispin [Tue, 14 Apr 2015 19:00:14 +0000 (19:00 +0000)]
opkg: drop md5 in favour of sha256
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45437
Rafał Miłecki [Tue, 14 Apr 2015 16:16:11 +0000 (16:16 +0000)]
otrx: use %zd to fix printf format warnings
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45436
Steven Barth [Tue, 14 Apr 2015 14:21:52 +0000 (14:21 +0000)]
odhcpd: fix accidental logic inversion
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45435
Felix Fietkau [Tue, 14 Apr 2015 12:49:30 +0000 (12:49 +0000)]
build: replace the deprecated find argument -perm +0100 with /0100 (#19480)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45434
Rafał Miłecki [Tue, 14 Apr 2015 12:18:57 +0000 (12:18 +0000)]
otrx: check TRX length read from header to avoid Segmentation fault
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45433
Felix Fietkau [Tue, 14 Apr 2015 12:17:34 +0000 (12:17 +0000)]
mac80211: merge a number of upstream driver fixes/improvements
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45432
Felix Fietkau [Tue, 14 Apr 2015 12:17:20 +0000 (12:17 +0000)]
kernel: update bgmac patches to the latest version submitted
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45431
Rafał Miłecki [Tue, 14 Apr 2015 11:10:14 +0000 (11:10 +0000)]
otrx: include byteswap.h to fix compilation with musl
Fixes #19470
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45430
Steven Barth [Tue, 14 Apr 2015 08:33:37 +0000 (08:33 +0000)]
odhcp6c: fix some issue discovered by scan-build
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45429
Steven Barth [Tue, 14 Apr 2015 08:31:53 +0000 (08:31 +0000)]
odhcpd: avoid illegal memory access in some corner cases
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45428
Felix Fietkau [Tue, 14 Apr 2015 00:00:55 +0000 (00:00 +0000)]
build: set CCACHE_DIR for host builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45427
Felix Fietkau [Mon, 13 Apr 2015 22:23:37 +0000 (22:23 +0000)]
bcm53xx: refresh kernel patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45426
Felix Fietkau [Mon, 13 Apr 2015 22:23:26 +0000 (22:23 +0000)]
qos-scripts: remove layer7 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45425
Felix Fietkau [Mon, 13 Apr 2015 22:23:19 +0000 (22:23 +0000)]
iptables: remove layer7 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45424
Felix Fietkau [Mon, 13 Apr 2015 22:23:14 +0000 (22:23 +0000)]
kernel: finally remove layer7 filter support
it has been non-functional for years and caused numerous memleaks and
crashes for people that tried to enable it.
it has no maintained upstream source, and it does not look like it's
going to be fixed any time soon
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45423
Felix Fietkau [Mon, 13 Apr 2015 20:08:30 +0000 (20:08 +0000)]
kernel: fix more bgmac dma init/cleanup issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45422
Imre Kaloz [Mon, 13 Apr 2015 20:06:47 +0000 (20:06 +0000)]
mvebu: copy the initramfs files to the bin dir
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45421
Felix Fietkau [Mon, 13 Apr 2015 17:32:33 +0000 (17:32 +0000)]
kernel: sync bgmac changes with latest upstream submission
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45420
Felix Fietkau [Mon, 13 Apr 2015 17:32:25 +0000 (17:32 +0000)]
bcm53xx: add support for the Buffalo WXR-1900DHP
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45419
Felix Fietkau [Mon, 13 Apr 2015 17:32:18 +0000 (17:32 +0000)]
bcm53xx: fix GPIO pins > 16
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45418
Felix Fietkau [Mon, 13 Apr 2015 17:32:12 +0000 (17:32 +0000)]
kernel: add bgmac fixes for bcm53xx (fix ethernet bringup on a bcm4709 based device)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45417
Felix Fietkau [Mon, 13 Apr 2015 17:32:05 +0000 (17:32 +0000)]
bcm53xx: add missing l2 cache controller AUXCTL bit
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45416
Imre Kaloz [Mon, 13 Apr 2015 13:06:34 +0000 (13:06 +0000)]
mvebu: add support for the in-CPU RTC on the Armada 38x
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45415
Imre Kaloz [Mon, 13 Apr 2015 12:15:40 +0000 (12:15 +0000)]
mvebu: add comments to image generation
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45414
Imre Kaloz [Mon, 13 Apr 2015 12:08:42 +0000 (12:08 +0000)]
mvebu: stop legacy image generation
If you can't find the firmware for you board, send proper patches.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45413
Imre Kaloz [Mon, 13 Apr 2015 12:06:56 +0000 (12:06 +0000)]
mvebu: generate a single firmware for the 385-db-ap
This has been done without having a board, but should work.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45412
Imre Kaloz [Mon, 13 Apr 2015 11:30:39 +0000 (11:30 +0000)]
mvebu: reflect Armada 38x support in the name
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45411
Steven Barth [Mon, 13 Apr 2015 07:49:29 +0000 (07:49 +0000)]
dnsmasq: fix dnssec timestamp logic, backport crashfix
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45410
Luka Perkov [Mon, 13 Apr 2015 07:01:32 +0000 (07:01 +0000)]
wpan: remove duplicate DEPENDS
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45409
Felix Fietkau [Sun, 12 Apr 2015 22:10:44 +0000 (22:10 +0000)]
bcm53xx: add a comment about the gpio base patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45408
Felix Fietkau [Sun, 12 Apr 2015 22:10:40 +0000 (22:10 +0000)]
kernel: bgmac: add more DMA related fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45407
Imre Kaloz [Sun, 12 Apr 2015 20:48:13 +0000 (20:48 +0000)]
ppc40x: upgrade to 3.18
left "broken" as I'm not sure if my only board is to blame.. testers welcomed
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45406
Imre Kaloz [Sun, 12 Apr 2015 20:45:55 +0000 (20:45 +0000)]
orion: upgrade to 3.18 (compile tested only)
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45405
Jo-Philipp Wich [Sun, 12 Apr 2015 20:34:31 +0000 (20:34 +0000)]
fstools: reject relative mount points
To prevent future confusion around '/overlay' vs. 'overlay' simply reject
relative path specifications as mount points since such paths result in
undefined behaviour anyway.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 45404
Rafał Miłecki [Sun, 12 Apr 2015 20:11:25 +0000 (20:11 +0000)]
bcm53xx: try to handle Netgear R8000 VLANs config
It seems to have few ports connected to CPU (only for CPU sending data?)
as part of "SMP dual core 3 GMAC setup" feature.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45403
Rafał Miłecki [Sun, 12 Apr 2015 20:00:42 +0000 (20:00 +0000)]
b53: improve overriding CPU port state on BCM5301X
On BCM5301X there are two different cases to handle: CPU port 8 vs. any
other one. Support for CPU port 8 was already partially implemented but
it lacked setting some extra bit for 2G speed. It also will need to be
extended to implement "SMP dual core 3 GMAC setup". That's the reason
for handling it in separated code block.
This patch also adds overriding CPU port state for port other than 8. It
requires using recently defined GMII_PORT registers.
It was tested for regressions on BCM53011 revs 2 & 3. It was also
confirmed to fix switch on some internal Broadcom board.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45402
Imre Kaloz [Sun, 12 Apr 2015 17:30:41 +0000 (17:30 +0000)]
mvebu: refresh patches
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45401
Imre Kaloz [Sun, 12 Apr 2015 17:29:50 +0000 (17:29 +0000)]
mvebu: migrate mamba support to the upstreamed code
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45400
Felix Fietkau [Sun, 12 Apr 2015 17:22:04 +0000 (17:22 +0000)]
bcm53xx: fix bcma gpio chip base
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45399
Felix Fietkau [Sun, 12 Apr 2015 16:39:24 +0000 (16:39 +0000)]
kernel: add missing memory barrier to bgmac
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45398
John Crispin [Sun, 12 Apr 2015 15:34:44 +0000 (15:34 +0000)]
modules: add missing imx6 depenedency to dwc2
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45397
Imre Kaloz [Sun, 12 Apr 2015 15:04:14 +0000 (15:04 +0000)]
mvebu: handle other SKUs as well
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45396
Imre Kaloz [Sun, 12 Apr 2015 15:03:25 +0000 (15:03 +0000)]
mvebu: include the ahci driver in the default profile
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45395
Imre Kaloz [Sun, 12 Apr 2015 15:02:43 +0000 (15:02 +0000)]
modules: package the mvebu ahci driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45394
Imre Kaloz [Sun, 12 Apr 2015 14:46:19 +0000 (14:46 +0000)]
generic: make sure we only try to mangle bootargs we do have
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45393
Rafał Miłecki [Sun, 12 Apr 2015 12:04:13 +0000 (12:04 +0000)]
bcm53xx: allow sysupgrade firmwares without UBI containing rootfs
In most cases it allows reverting back to the vendor firmware (as they
usually don't use UBI). If users wants to do that we can't do anything
anyway. Erease counters will be just lost. The only thing we do is warn:
"Flashing firmware without UBI for rootfs. All erase counters will be
lost."
It still requires forcing sysupgrade.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45392
Rafał Miłecki [Sun, 12 Apr 2015 11:46:16 +0000 (11:46 +0000)]
bcm53xx: add platform_pre_upgrade to prepare for kernel+UBI sysupgrade
We can now detect that provided firmware contains kernel and UBI image
partitions. Flashing it in a sane way (keeping erase counters) still
needs to be implemented.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45391
Rafał Miłecki [Sun, 12 Apr 2015 11:46:11 +0000 (11:46 +0000)]
otrx: support for extracting partitions
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45390
Rafał Miłecki [Sun, 12 Apr 2015 10:42:27 +0000 (10:42 +0000)]
bcm53xx: rework vendor fw handling to don't duplicate upgrade calls
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45389
Felix Fietkau [Sun, 12 Apr 2015 10:35:21 +0000 (10:35 +0000)]
kernel: add bgmac fixes for various issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45388
Rafał Miłecki [Sun, 12 Apr 2015 10:20:59 +0000 (10:20 +0000)]
bcm53xx: fix UBI EOF patch to allow sysupgrade after first installation
With previous version of patch info about need of erasing blocks was
stored once per boot. It was breaking in following scenario:
1) First boot after installation (erasing blocks after 0xdeadc0de)
2) Doing sysupgrade (with ubidetach & ubiformat)
3) Attaching UBI again (it caused all blocks to be erased)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45387
Imre Kaloz [Sun, 12 Apr 2015 08:35:33 +0000 (08:35 +0000)]
mvebu: reformat the damaged syscfg partition on the mamba
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45386
Felix Fietkau [Sat, 11 Apr 2015 21:21:03 +0000 (21:21 +0000)]
kernel: revert section sorting change from r41951
It currently does not seem to make a difference anymore, except by
increasing compressed kernel image size
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45385
Felix Fietkau [Sat, 11 Apr 2015 19:34:45 +0000 (19:34 +0000)]
busybox: enable BUSYBOX_DEFAULT_FEATURE_TOUCH_SUSV3 by default, dnsmasq relies on it
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45384
Felix Fietkau [Sat, 11 Apr 2015 12:23:36 +0000 (12:23 +0000)]
kernel: remove leftover @ (#19454)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45383
Felix Fietkau [Sat, 11 Apr 2015 12:22:39 +0000 (12:22 +0000)]
netfilter.mk: remove bogus NAT related kernel module entries (#19451)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45382
Felix Fietkau [Sat, 11 Apr 2015 12:22:28 +0000 (12:22 +0000)]
netfilter.mk: drop obsolete kernel version dependencies
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45381
Felix Fietkau [Sat, 11 Apr 2015 10:52:01 +0000 (10:52 +0000)]
netifd: fix ieee80211r 'sh: bad number' in mac80211 setup (bug #19345)
Two errors "netifd: radio0: sh: bad number" have recently surfaced in system
log in trunk when wifi interfaces come up. I tracked the errors to checking
numerical values of some config options without ensuring that the option has
any value.
The errors I see have apparently been introduced by r45051 (ieee80211r in
hostapd) and r45326 (start_disabled in mac80211). My patches fix two
instances of "bad number", but there may be a third one, as the original
report in bug 19345 pre-dates r45326 and already has two "bad number" errors
for radio0.
https://dev.openwrt.org/ticket/19345
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45380
Felix Fietkau [Sat, 11 Apr 2015 10:51:55 +0000 (10:51 +0000)]
netifd: fix start_disabled 'sh: bad number' in mac80211 setup (bug #19345)
Two errors "netifd: radio0: sh: bad number" have recently surfaced in system
log in trunk when wifi interfaces come up. I tracked the errors to checking
numerical values of some config options without ensuring that the option has
any value.
The errors I see have apparently been introduced by r45051 (ieee80211r in
hostapd) and r45326 (start_disabled in mac80211). My patches fix two
instances of "bad number", but there may be a third one, as the original
report in bug 19345 pre-dates r45326 and already has two "bad number" errors
for radio0.
https://dev.openwrt.org/ticket/19345
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
SVN-Revision: 45379
Luka Perkov [Sat, 11 Apr 2015 10:46:20 +0000 (10:46 +0000)]
imx6: add missing patches from 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45378
Felix Fietkau [Sat, 11 Apr 2015 10:43:46 +0000 (10:43 +0000)]
kernel: remove kernel module checks/dependencies for 3.14
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45377
Luka Perkov [Sat, 11 Apr 2015 10:28:20 +0000 (10:28 +0000)]
include: drop old kernel versions
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45376
Luka Perkov [Sat, 11 Apr 2015 10:28:14 +0000 (10:28 +0000)]
generic: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45375
Luka Perkov [Sat, 11 Apr 2015 10:28:11 +0000 (10:28 +0000)]
brcm47xx: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45374
Luka Perkov [Sat, 11 Apr 2015 10:28:06 +0000 (10:28 +0000)]
adm8668: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45373
Luka Perkov [Sat, 11 Apr 2015 10:28:03 +0000 (10:28 +0000)]
mcs814x: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45372
Luka Perkov [Sat, 11 Apr 2015 10:28:00 +0000 (10:28 +0000)]
imx6: drop 3.14
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45371
Luka Perkov [Sat, 11 Apr 2015 10:27:49 +0000 (10:27 +0000)]
imx6: switch to 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45370
Zoltan Herpai [Fri, 10 Apr 2015 21:36:33 +0000 (21:36 +0000)]
mxs: reinstate rootfs image creation and dtb copy
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 45369
Zoltan Herpai [Fri, 10 Apr 2015 21:34:21 +0000 (21:34 +0000)]
mxs: Include the right kernel image in the rootfs
Signed-off-by: Harald Geyer <harald@ccbib.org>
Acked-by: Michael Heimpold <mhei@heimpold.de>
SVN-Revision: 45368
John Crispin [Fri, 10 Apr 2015 20:39:44 +0000 (20:39 +0000)]
modules: fix postinst generation for kernel modules
Fixes ticket #19352.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45367
Felix Fietkau [Fri, 10 Apr 2015 20:02:55 +0000 (20:02 +0000)]
librpc: update to the latest version, fixes musl compatibility issues (#19445)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45366
John Crispin [Fri, 10 Apr 2015 14:42:11 +0000 (14:42 +0000)]
modules: more wpan fixes
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45365
John Crispin [Fri, 10 Apr 2015 13:39:38 +0000 (13:39 +0000)]
modules: add missing wpan fakehard driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45364
John Crispin [Fri, 10 Apr 2015 13:39:33 +0000 (13:39 +0000)]
kernel: remove references to kmod-of-i2c
these break the IB since the module is part of i2c-core now
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45363
Felix Fietkau [Fri, 10 Apr 2015 11:52:59 +0000 (11:52 +0000)]
kernel: add jffs2 RENAME_WHITEOUT support, fixes overlayfs renames (#19432)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45362
Felix Fietkau [Fri, 10 Apr 2015 11:52:54 +0000 (11:52 +0000)]
kernel: drop obsolete linux 3.10 related dependencies/checks
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45361
Felix Fietkau [Fri, 10 Apr 2015 11:52:47 +0000 (11:52 +0000)]
kernel: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45360
Steven Barth [Fri, 10 Apr 2015 11:52:42 +0000 (11:52 +0000)]
odhcpd: send current hop-limit by default in RAs
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45359
Steven Barth [Fri, 10 Apr 2015 11:33:15 +0000 (11:33 +0000)]
odhcp6c: move IPv6 /proc config to userspace and sanitize
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45358
Jonas Gorski [Fri, 10 Apr 2015 10:30:00 +0000 (10:30 +0000)]
kernel: fix kmod-ieee802154_6lowpan config symbol
Fixes build failure caught by buildbot:
IEEE Std 802.15.4 Low-Rate Wireless Personal Area Networks support (IEEE802154) [M/n/y/?] m
6lowpan support over IEEE 802.15.4 (IEEE802154_6LOWPAN) [N/m/?] (NEW) aborted!
Console input/output is redirected. Run 'make oldconfig' to update configuration.
make[6]: *** [silentoldconfig] Error 1
make[5]: *** [silentoldconfig] Error 2
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45357
Jonas Gorski [Fri, 10 Apr 2015 10:29:04 +0000 (10:29 +0000)]
b53: clean up code to match kernel style better
* properly enclose macro arguments in paranthesis on use
* remove trailing white space
* convert C99 // comments
* add missing blank lines after declaration
* remove braces from single statement blocks
* split lines > 80 chars (except for one)
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45356
Jonas Gorski [Fri, 10 Apr 2015 10:28:46 +0000 (10:28 +0000)]
b53: define registers available and needed on BCM5301X
They are also present on some BCM63xx switches.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45355
Steven Barth [Fri, 10 Apr 2015 10:19:17 +0000 (10:19 +0000)]
dnsmasq: bump to 2.73rc4
Fix crash caused by malformed DNS requests
Improved DNSSEC handling
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45354
Rafał Miłecki [Fri, 10 Apr 2015 09:58:00 +0000 (09:58 +0000)]
bcm53xx: build image for ASUS RT-AC56U
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45353
Rafał Miłecki [Fri, 10 Apr 2015 09:42:48 +0000 (09:42 +0000)]
bcm53xx: Luxul XWC-1000 has only 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45352
John Crispin [Fri, 10 Apr 2015 08:31:26 +0000 (08:31 +0000)]
hostapd: remove unused asprintf parameter
r45270 removed ieee80211n=%d from the format string but didn't remove
the parameter itself. Though this probably doesn't cause any harm, it's
quite confusing and unneeded.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45351
John Crispin [Fri, 10 Apr 2015 08:31:06 +0000 (08:31 +0000)]
iptables: revert r40916
it causes problems with newer iptables when ipv6 is disabled as iptc uncoditionally links ip6tc
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45350
John Crispin [Fri, 10 Apr 2015 08:30:11 +0000 (08:30 +0000)]
wpan-tools: adds wpan-tools utility
This patch adds the wpan-tools (iwpan) utility to OpenWRT
build system. This utility required to manage IEE-802.15.4
devices.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45349
John Crispin [Fri, 10 Apr 2015 08:29:35 +0000 (08:29 +0000)]
kernel: adds wpan related packages
This patch adds the IEEE-802.15.4 and 6LoWPAN related
packages.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45348
John Crispin [Fri, 10 Apr 2015 08:29:26 +0000 (08:29 +0000)]
sunxi: don't enable ARMTHUMB XZ BCJ filter in kernel
Having CONFIG_XZ_DEC_ARMTHUMB enabled breaks squashfs when ARM BCJ
filter was used to create the filesystem (and that's what we do on
all ARM targets). Thus unset CONFIG_XZ_DEC_ARMTHUMB to fix
squashfs on sunxi.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45347
John Crispin [Fri, 10 Apr 2015 08:29:05 +0000 (08:29 +0000)]
qca-nss-gmac: update to latest version
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45346
John Crispin [Fri, 10 Apr 2015 08:28:44 +0000 (08:28 +0000)]
ipq806x: automatically select kmod-usb-phy-qcom-dwc3
kmod-usb-phy-qcom-dwc3 is required to get USB working on ipq806x. It was
missed in previous commit so let's enable it automatically.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45345
John Crispin [Fri, 10 Apr 2015 08:28:21 +0000 (08:28 +0000)]
procd: fix compile error on x86_64
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45344
John Crispin [Fri, 10 Apr 2015 08:27:55 +0000 (08:27 +0000)]
openssl: disable arm optimisation until we know why it fails on some socs
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45343
John Crispin [Fri, 10 Apr 2015 08:27:44 +0000 (08:27 +0000)]
ralink: fix cevt-r4k hack
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45342
John Crispin [Fri, 10 Apr 2015 08:27:27 +0000 (08:27 +0000)]
fstools: update to latest git HEAD
this fixes extroot on mvebu
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45341
Felix Fietkau [Thu, 9 Apr 2015 14:57:25 +0000 (14:57 +0000)]
uci: update to the latest version, fixes a regression in handling empty/comment lines in uci batch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45340
projects / librecmc / librecmc.git / log