Richard Levitte [Tue, 24 Jul 2018 17:29:49 +0000 (19:29 +0200)]
Configure death handler: remember to call original death handler
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)
Richard Levitte [Tue, 24 Jul 2018 17:29:06 +0000 (19:29 +0200)]
Configure death handler: bail out early when run in eval block
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6776)
David Benjamin [Tue, 17 Jul 2018 17:20:28 +0000 (13:20 -0400)]
Remove zero special-case in BN_mod_exp_mont.
A number intended to treat the base as secret should not be branching on
whether it is zero. Test-wise, this is covered by existing tests in bnmod.txt.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6733)
Richard Levitte [Tue, 24 Jul 2018 08:45:05 +0000 (10:45 +0200)]
Configure: print generic advice when dying
On the same note, change the 'NASM not found' message to give specific
advice on how to handle the failure.
Fixes #6765
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6771)
neighbads [Wed, 11 Jul 2018 07:40:03 +0000 (15:40 +0800)]
Update sm2_crypt.c
asn1_encode : x, y => 0 | x,0 | y
(because of DER encoding rules when x and y have high bit set)
CLA: Trivial
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6694)
Richard Levitte [Mon, 23 Jul 2018 20:29:22 +0000 (22:29 +0200)]
def_load_bio(): Free |biosk| more carefully
If there's anything in the |biosk| stack, the first element is always
the input BIO. It should never be freed in this function, so we must
take careful steps not to do so inadvertently when freeing the stack.
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6769)
Andy Polyakov [Sun, 22 Jul 2018 09:51:38 +0000 (11:51 +0200)]
.travis.yml: omit linux-ppc64le target.
Build jobs keep timing out initializing...
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Richard Levitte [Mon, 23 Jul 2018 11:25:45 +0000 (13:25 +0200)]
Make sure the 'tsget' script is called 'tsget.pl' everywhere
The result is that we don't have to produce different names on
different platforms, and we won't have confusion on Windows depending
on if the script was built with mingw or with MSVC.
Partial fix for #3254
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6764)
Matt Caswell [Wed, 18 Jul 2018 14:22:06 +0000 (15:22 +0100)]
Add a note about aborts encountered while sending early_data
In some circumstances it is possible for a client to have a session
reporting a max early data value that is greater than the server will
support. In such cases the client could encounter an aborted connection.
Fixes #6735
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6740)
Andy Polyakov [Wed, 18 Jul 2018 13:22:07 +0000 (15:22 +0200)]
ec/ecp_nistz256.c: fix ecp_nistz256_set_from_affine.
ecp_nistz256_set_from_affine is called when application attempts to use
custom generator, i.e. rarely. Even though it was wrong, it didn't
affect point operations, they were just not as fast as expected.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)
Andy Polyakov [Wed, 18 Jul 2018 13:14:44 +0000 (15:14 +0200)]
ec/asm/ecp_nistz256-{!x86_64}.pl: fix scatter_w7 function.
The ecp_nistz256_scatter_w7 function is called when application
attempts to use custom generator, i.e. rarely. Even though non-x86_64
versions were wrong, it didn't affect point operations, they were just
not as fast as expected.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)
Andy Polyakov [Wed, 18 Jul 2018 13:13:27 +0000 (15:13 +0200)]
bn/bn_intern.c: const-ify bn_set_{static}_words.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6738)
Andy Polyakov [Sat, 21 Jul 2018 11:50:14 +0000 (13:50 +0200)]
apps/dsaparam.c: fix -C output.
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6758)
Richard Levitte [Sun, 22 Jul 2018 08:56:25 +0000 (10:56 +0200)]
Configure: Display error/warning on deprecated/unsupported options after loop
Fixes #6755
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6759)
Richard Levitte [Thu, 12 Jul 2018 20:55:03 +0000 (22:55 +0200)]
PKCS12: change safeContentsBag from a SET OF to a SEQUENCE OF
As per RFC 7292.
Fixes #6665
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6708)
Benjamin Kaduk [Wed, 30 May 2018 16:12:22 +0000 (11:12 -0500)]
Add TODO comment for a nonsensical public API
The API used to set what SNI value to send in the ClientHello
can also be used on server SSL objects, with undocumented and
un-useful behavior. Unfortunately, when generic SSL_METHODs
are used, s->server is still set, prior to the start of the
handshake, so we cannot prevent this nonsensical usage at the
present time. Leave a note to revisit this when ABI-breaking
changes are permitted.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
Benjamin Kaduk [Wed, 30 May 2018 14:49:29 +0000 (09:49 -0500)]
Normalize SNI hostname handling for SSL and SSL_SESSION
In particular, adhere to the rule that we must not modify any
property of an SSL_SESSION object once it is (or might be) in
a session cache. Such modifications are thread-unsafe and have
been observed to cause crashes at runtime.
To effect this change, standardize on the property that
SSL_SESSION->ext.hostname is set only when that SNI value
has been negotiated by both parties for use with that session.
For session resumption this is trivially the case, so only new
handshakes are affected.
On the client, the new semantics are that the SSL->ext.hostname is
for storing the value configured by the caller, and this value is
used when constructing the ClientHello. On the server, SSL->ext.hostname
is used to hold the value received from the client. Only if the
SNI negotiation is successful will the hostname be stored into the
session object; the server can do this after it sends the ServerHello,
and the client after it has received and processed the ServerHello.
This obviates the need to remove the hostname from the session object
in case of failed negotiation (a change that was introduced in commit
9fb6cb810b769abbd60f11ef6e936a4e4456b19d in order to allow TLS 1.3
early data when SNI was present in the ClientHello but not the session
being resumed), which was modifying cached sessions in certain cases.
(In TLS 1.3 we always produce a new SSL_SESSION object for new
connections, even in the case of resumption, so no TLS 1.3 handshakes
were affected.)
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
Benjamin Kaduk [Wed, 30 May 2018 14:28:03 +0000 (09:28 -0500)]
const-ify some input SSL * arguments
These tiny functions only read from the input SSL, and we are
about to use them from functions that only have a const SSL* available,
so propagate const a bit further.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6378)
Andy Polyakov [Thu, 19 Jul 2018 13:28:34 +0000 (15:28 +0200)]
crypto/*: address standard-compilance nits.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)
Andy Polyakov [Thu, 19 Jul 2018 13:27:24 +0000 (15:27 +0200)]
bio/bss_dgram.c: harmonize usage of OPENSSL_USE_IPV6 with the rest.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)
Andy Polyakov [Thu, 19 Jul 2018 13:16:38 +0000 (15:16 +0200)]
include/openssl/e_os2.h: define last-resort SSIZE_MAX.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)
Andy Polyakov [Thu, 19 Jul 2018 12:45:06 +0000 (14:45 +0200)]
ec/ec_lcl.h: fix pre-C9x compilation problems.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)
Andy Polyakov [Thu, 19 Jul 2018 10:30:26 +0000 (12:30 +0200)]
.travis.yml: exercise -std=c89 in order to catch corresponding problems.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
(Merged from https://github.com/openssl/openssl/pull/6745)
Matt Caswell [Thu, 19 Jul 2018 15:51:58 +0000 (16:51 +0100)]
Validate legacy_version
The spec says that a client MUST set legacy_version to TLSv1.2, and
requires servers to verify that it isn't SSLv3.
Fixes #6600
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6747)
Matt Caswell [Thu, 19 Jul 2018 11:46:02 +0000 (12:46 +0100)]
Update the TLSv1.3 test vectors
Use the latest version of the test vectors available in:
https://tools.ietf.org/html/draft-ietf-tls-tls13-vectors-06
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6746)
Matt Caswell [Wed, 18 Jul 2018 11:29:36 +0000 (12:29 +0100)]
Test early_data sent after a second ClientHello causes a failure
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6737)
Matt Caswell [Wed, 18 Jul 2018 10:16:28 +0000 (11:16 +0100)]
Don't skip over early_data if we sent an HRR
It is not valid to send early_data after an HRR has been received.
Fixes #6734
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6737)
Andy Polyakov [Sun, 15 Jul 2018 15:59:59 +0000 (17:59 +0200)]
CHANGES: mention blinding reverting in ECDSA. [skip ci]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)
Andy Polyakov [Thu, 12 Jul 2018 20:27:43 +0000 (22:27 +0200)]
ec/ecdsa_ossl.c: switch to fixed-length Montgomery multiplication.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)
Andy Polyakov [Fri, 6 Jul 2018 14:13:29 +0000 (16:13 +0200)]
ec/ecdsa_ossl.c: formatting and readability fixes.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)
Andy Polyakov [Fri, 6 Jul 2018 13:55:34 +0000 (15:55 +0200)]
ec/ecdsa_ossl.c: revert blinding in ECDSA signature.
Originally suggested solution for "Return Of the Hidden Number Problem"
is arguably too expensive. While it has marginal impact on slower
curves, none to ~6%, optimized implementations suffer real penalties.
Most notably sign with P-256 went more than 2 times[!] slower. Instead,
just implement constant-time BN_mod_add_quick.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6664)
Andy Polyakov [Mon, 16 Jul 2018 16:17:44 +0000 (18:17 +0200)]
bn/bn_lib.c address Coverity nit in bn2binpad.
It was false positive, but one can as well view it as readability issue.
Switch even to unsigned indices because % BN_BYTES takes 4-6 instructions
with signed dividend vs. 1 (one) with unsigned.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Matt Caswell [Tue, 17 Jul 2018 16:29:08 +0000 (17:29 +0100)]
Add a test for mismatch between key OID and sig alg
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)
Matt Caswell [Tue, 17 Jul 2018 15:31:07 +0000 (16:31 +0100)]
Check that the public key OID matches the sig alg
Using the rsa_pss_rsae_sha256 sig alg should imply that the key OID is
rsaEncryption. Similarly rsa_pss_pss_sha256 implies the key OID is
rsassaPss. However we did not check this and incorrectly tolerated a key
OID that did not match the sig alg sent by the peer.
Fixes #6611
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6732)
Mat [Tue, 17 Jul 2018 13:48:27 +0000 (09:48 -0400)]
Fix typo in x25519-x86_64.pl
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6726)
Matt Caswell [Tue, 17 Jul 2018 10:43:30 +0000 (11:43 +0100)]
Skip the GOST test where appropriate
The GOST ciphers are dynamically loaded via the GOST engine, so we must
be able to support that. The engine also uses DSA and CMS symbols, so we
skip the test on no-dsa or no-cms.
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6730)
Matt Caswell [Tue, 17 Jul 2018 09:27:57 +0000 (10:27 +0100)]
Fix a memory leak in the ticket test
Also fixes a function name typo.
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6729)
Matt Caswell [Mon, 16 Jul 2018 16:31:37 +0000 (17:31 +0100)]
Fix no-psk
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6724)
Matt Caswell [Mon, 16 Jul 2018 15:58:23 +0000 (16:58 +0100)]
Test that a failed resumption issues the correct number of tickets
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)
Matt Caswell [Mon, 16 Jul 2018 15:57:36 +0000 (16:57 +0100)]
Always issue new tickets when using TLSv1.3 stateful tickets
Previously we were failing to issue new tickets if a resumption attempt
failed.
Fixes #6654
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)
Matt Caswell [Thu, 5 Jul 2018 16:19:03 +0000 (17:19 +0100)]
Improve testing of stateful tickets
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)
Matt Caswell [Mon, 16 Jul 2018 13:57:35 +0000 (14:57 +0100)]
Don't remove sessions from the cache during PHA in TLSv1.3
If we issue new tickets due to post-handshake authentication there is no
reason to remove previous tickets from the cache. The code that did that
only removed the last session anyway - so if more than one ticket got
issued then those other tickets are still valid.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6722)
Kurt Roeckx [Sun, 13 May 2018 09:24:11 +0000 (11:24 +0200)]
Improve documentation about reading and writing
Reviewed-by: Matt Caswell <matt@openssl.org>
GH: #6240
Kurt Roeckx [Sun, 15 Jul 2018 11:49:53 +0000 (13:49 +0200)]
Enable all protocols and ciphers in the fuzzer
The config file can override it.
In case of the server, it needs to be set on the ctx or some of the
other functions on the ctx might file.
Reviewed-by: Rich Salz <rsalz@openssl.org>
DH: #6718
Nicola Tuveri [Sun, 8 Jul 2018 07:39:39 +0000 (10:39 +0300)]
EC2M Lopez-Dahab ladder: use it also for ECDSA verify
By default `ec_scalar_mul_ladder` (which uses the Lopez-Dahab ladder
implementation) is used only for (k * Generator) or (k * VariablePoint).
ECDSA verification uses (a * Generator + b * VariablePoint): this commit
forces the use of `ec_scalar_mul_ladder` also for the ECDSA verification
path, while using the default wNAF implementation for any other case.
With this commit `ec_scalar_mul_ladder` loses the static attribute, and
is added to ec_lcl.h so EC_METHODs can directly use it.
While working on a new custom EC_POINTs_mul implementation, I realized
that many checks (e.g. all the points being compatible with the given
EC_GROUP, creating a temporary BN_CTX if `ctx == NULL`, check for the
corner case `scalar == NULL && num == 0`) were duplicated again and
again in every single implementation (and actually some
implementations lacked some of the tests).
I thought that it makes way more sense for those checks that are
independent from the actual implementation and should always be done, to
be moved in the EC_POINTs_mul wrapper: so this commit also includes
these changes.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Nicola Tuveri [Fri, 13 Jul 2018 21:55:01 +0000 (00:55 +0300)]
EC2M Lopez-Dahab ladder implementation
This commit uses the new ladder scaffold to implement a specialized
ladder step based on differential addition-and-doubling in mixed
Lopez-Dahab projective coordinates, modified to independently blind the
operands.
The arithmetic in `ladder_pre`, `ladder_step` and `ladder_post` is
auto generated with tooling:
- see, e.g., "Guide to ECC" Alg 3.40 for reference about the
`ladder_pre` implementation;
- see https://www.hyperelliptic.org/EFD/g12o/auto-code/shortw/xz/ladder/mladd-2003-s.op3
for the differential addition-and-doubling formulas implemented in
`ladder_step`;
- see, e.g., "Fast Multiplication on Elliptic Curves over GF(2**m)
without Precomputation" (Lopez and Dahab, CHES 1999) Appendix Alg Mxy
for the `ladder_post` implementation to recover the `(x,y)` result in
affine coordinates.
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Billy Brumley [Sat, 7 Jul 2018 22:27:34 +0000 (01:27 +0300)]
[test] test some important ladder corner cases
and catch corner cases better and earlier
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Nicola Tuveri [Sat, 7 Jul 2018 21:50:49 +0000 (00:50 +0300)]
EC point multiplication: add `ladder` scaffold
for specialized Montgomery ladder implementations
PR #6009 and #6070 replaced the default EC point multiplication path for
prime and binary curves with a unified Montgomery ladder implementation
with various timing attack defenses (for the common paths when a secret
scalar is feed to the point multiplication).
The newly introduced default implementation directly used
EC_POINT_add/dbl in the main loop.
The scaffolding introduced by this commit allows EC_METHODs to define a
specialized `ladder_step` function to improve performances by taking
advantage of efficient formulas for differential addition-and-doubling
and different coordinate systems.
- `ladder_pre` is executed before the main loop of the ladder: by
default it copies the input point P into S, and doubles it into R.
Specialized implementations could, e.g., use this hook to transition
to different coordinate systems before copying and doubling;
- `ladder_step` is the core of the Montgomery ladder loop: by default it
computes `S := R+S; R := 2R;`, but specific implementations could,
e.g., implement a more efficient formula for differential
addition-and-doubling;
- `ladder_post` is executed after the Montgomery ladder loop: by default
it's a noop, but specialized implementations could, e.g., use this
hook to transition back from the coordinate system used for optimizing
the differential addition-and-doubling or recover the y coordinate of
the result point.
This commit also renames `ec_mul_consttime` to `ec_scalar_mul_ladder`,
as it better corresponds to what this function does: nothing can be
truly said about the constant-timeness of the overall execution of this
function, given that the underlying operations are not necessarily
constant-time themselves.
What this implementation ensures is that the same fixed sequence of
operations is executed for each scalar multiplication (for a given
EC_GROUP), with no dependency on the value of the input scalar.
Co-authored-by: Sohaib ul Hassan <soh.19.hassan@gmail.com>
Co-authored-by: Billy Brumley <bbrumley@gmail.com>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Nicola Tuveri [Fri, 13 Jul 2018 08:48:29 +0000 (11:48 +0300)]
Remove stale SM2 error codes
Run `make update ERROR_REBUILD=-rebuild` to remove some stale error
codes for SM2 (which is now using its own submodule for error codes,
i.e., `SM2_*`).
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6690)
Andy Polyakov [Thu, 12 Jul 2018 09:53:16 +0000 (11:53 +0200)]
ec/curve25519.c: reorganize for better accessibility.
Move base 2^64 code to own #if section. It was nested in base 2^51 section,
which arguably might have been tricky to follow.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)
Andy Polyakov [Wed, 11 Jul 2018 20:36:49 +0000 (22:36 +0200)]
ec/asm/x25519-x86_64.pl: add CFI directives and Windows SE handler.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)
Andy Polyakov [Wed, 11 Jul 2018 20:22:52 +0000 (22:22 +0200)]
test/.../evppkey.txt: X25519 regression test vectors.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)
Andy Polyakov [Wed, 11 Jul 2018 20:08:02 +0000 (22:08 +0200)]
ec/asm/x25519-x86_64.pl: fix base 2^64 add/sub and final reduction.
Base 2^64 addition/subtraction and final reduction failed to treat
partially reduced values correctly.
Thanks to Wycheproof Project for vectors and Paul Kehrer for report.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6699)
Andy Polyakov [Thu, 12 Jul 2018 17:15:26 +0000 (19:15 +0200)]
bn/bn_lcl.h,bn_nist.c: addres strict warnings with -DBN_DEBUG.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Andy Polyakov [Sun, 4 Feb 2018 14:24:54 +0000 (15:24 +0100)]
rsa/*: switch to BN_bn2binpad.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5254)
Andy Polyakov [Sun, 4 Feb 2018 14:20:29 +0000 (15:20 +0100)]
bn/bn_lib.c: make BN_bn2binpad computationally constant-time.
"Computationally constant-time" means that it might still leak
information about input's length, but only in cases when input
is missing complete BN_ULONG limbs. But even then leak is possible
only if attacker can observe memory access pattern with limb
granularity.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5254)
Matt Caswell [Fri, 13 Jul 2018 15:11:46 +0000 (16:11 +0100)]
Add a GOST test
Test that we never negotiate TLSv1.3 using GOST
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)
Matt Caswell [Wed, 4 Jul 2018 15:48:56 +0000 (16:48 +0100)]
As a server don't select TLSv1.3 if we're not capable of it
Check that we are either configured for PSK, or that we have a TLSv1.3
capable certificate type. DSA certs can't be used in TLSv1.3 and we
don't (currently) allow GOST ones either (owing to the lack of standard
sig algs).
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)
Matt Caswell [Wed, 4 Jul 2018 15:02:20 +0000 (16:02 +0100)]
Use ssl_version_supported() when choosing server version
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)
Matt Caswell [Tue, 3 Jul 2018 16:45:35 +0000 (17:45 +0100)]
Do not use GOST sig algs in TLSv1.3 where possible
Fixes #6513
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6650)
Alexandre Perrin [Fri, 13 Jul 2018 08:32:42 +0000 (10:32 +0200)]
Documentation typo fix in BN_bn2bin.pod
Change the description for BN_hex2bn() so that it uses the same BIGNUM argument name as its prototype.
CLA: trivial
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6712)
Patrick Steuer [Thu, 12 Jul 2018 17:19:07 +0000 (13:19 -0400)]
Fix undefined behavior in s390x aes-gcm/ccm
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Andy Polyakov [Fri, 6 Jul 2018 13:13:15 +0000 (15:13 +0200)]
bn/bn_{mont|exp}.c: switch to zero-padded intermediate vectors.
Note that exported functions maintain original behaviour, so that
external callers won't observe difference. While internally we can
now perform Montogomery multiplication on fixed-length vectors, fixed
at modulus size. The new functions, bn_to_mont_fixed_top and
bn_mul_mont_fixed_top, are declared in bn_int.h, because one can use
them even outside bn, e.g. in RSA, DSA, ECDSA...
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
Andy Polyakov [Fri, 6 Jul 2018 13:02:29 +0000 (15:02 +0200)]
bn/bn_lib.c: add BN_FLG_FIXED_TOP flag.
The new flag marks vectors that were not treated with bn_correct_top,
in other words such vectors are permitted to be zero padded. For now
it's BN_DEBUG-only flag, as initial use case for zero-padded vectors
would be controlled Montgomery multiplication/exponentiation, not
general purpose. For general purpose use another type might be more
appropriate. Advantage of this suggestion is that it's possible to
back-port it...
bn/bn_div.c: fix memory sanitizer problem.
bn/bn_sqr.c: harmonize with BN_mul.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
Andy Polyakov [Fri, 6 Jul 2018 12:54:34 +0000 (14:54 +0200)]
bn/bn_mont.c: improve readability of post-condition code.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
Andy Polyakov [Fri, 6 Jul 2018 11:46:07 +0000 (13:46 +0200)]
bn/bn_mont.c: move boundary condition check closer to caller.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
Andy Polyakov [Fri, 6 Jul 2018 11:16:40 +0000 (13:16 +0200)]
bn/bn_lib.c: remove bn_check_top from bn_expand2.
Trouble is that addition is postponing expansion till carry is
calculated, and if addition carries, top word can be zero, which
triggers assertion in bn_check_top.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: David Benjamin <davidben@google.com>
(Merged from https://github.com/openssl/openssl/pull/6662)
Patrick Steuer [Fri, 2 Feb 2018 10:09:25 +0000 (11:09 +0100)]
apps/speed.c: let EVP_Update_loop_ccm behave more like EVP_Update_loop
Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5246)
Richard Levitte [Wed, 11 Jul 2018 09:05:15 +0000 (11:05 +0200)]
Windows: avoid using 'rem' in the nmake makefile
To avoid the possibility that someone creates rem.exe, rem.bat or
rem.cmd, simply don't use it. In the cases it was used, it was to
avoid empty lines, but it turns out that nmake handles those fine, so
no harm done.
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6686)
Richard Levitte [Tue, 10 Jul 2018 12:12:33 +0000 (14:12 +0200)]
Windows: fix echo for nmake
It seems that nmake first tries to run executables on its own, and
only pass commands to cmd if that fails. That means it's possible to
have nmake run something like 'echo.exe' when the builtin 'echo'
command was expected, which might give us unexpected results.
To get around this, we create our own echoing script and call it
explicitly from the nmake makefile.
Fixes #6670
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6686)
Pauli [Tue, 3 Jul 2018 23:30:43 +0000 (09:30 +1000)]
NCONF_get_number refix.
Fix the NULL check lack in a different way that is more compatible with
non-NULL branch. Refer #6632
Also mark and pop the error stack instead of clearing all errors when something
goes awry in CONF_get_number.
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6643)
Richard Levitte [Tue, 10 Jul 2018 17:11:06 +0000 (19:11 +0200)]
Guard DECLARE_DEPRECATED against multiple includes of opensslconf.h
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6689)
Richard Levitte [Mon, 9 Jul 2018 19:10:10 +0000 (21:10 +0200)]
util/dofile.pl: require Text::Template 1.46 or newer
The reason is that we override Text::Template::append_text_to_output(),
and it didn't exist before Text::Template 1.46.
Fixes #6641
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6682)
Richard Levitte [Mon, 9 Jul 2018 19:09:30 +0000 (21:09 +0200)]
Existing transfer modules must have a package and a $VERSION
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6682)
Richard Levitte [Mon, 9 Jul 2018 19:07:25 +0000 (21:07 +0200)]
Make 'with_fallback' use 'use' instead of 'require'
This enables us to require module versions, and to fall back to a
bundled version if the system version is too low.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6682)
Richard Levitte [Mon, 9 Jul 2018 15:31:23 +0000 (17:31 +0200)]
Avoid __GNUC__ warnings when defining DECLARE_DEPRECATED
We need to check that __GNUC__ is defined before trying to use it.
This demands a slightly different way to define DECLARE_DEPRECATED.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6680)
Andy Polyakov [Mon, 9 Jul 2018 09:11:37 +0000 (11:11 +0200)]
poly1305/asm/poly1305-x86_64.pl: fix solaris64-x86_64-cc build.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6676)
Rich Salz [Mon, 9 Jul 2018 18:55:17 +0000 (14:55 -0400)]
Add tests for the "req" command, -addext flag
Also fixed a memory leak found by the test.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6681)
Bernd Edlinger [Thu, 5 Jul 2018 13:38:28 +0000 (15:38 +0200)]
Fix minor windows build issues
[extended tests]
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6661)
Andy Polyakov [Sun, 8 Jul 2018 16:57:30 +0000 (18:57 +0200)]
apps/req.c: fix -addext option.
Address even Coverity nit.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6671)
Conrad Meyer [Mon, 9 Jul 2018 16:45:28 +0000 (12:45 -0400)]
Correctly check for cryptodev hash support
The sense of the check for build-time support for most hashes was inverted.
CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6673)
Andy Polyakov [Sun, 8 Jul 2018 10:12:15 +0000 (12:12 +0200)]
modes/ocb128.c: readability and formatting improvements.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6669)
DesWurstes [Sat, 7 Jul 2018 09:10:53 +0000 (12:10 +0300)]
modes/ocb128.c: improve the calculation of double mask
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6667)
Richard Levitte [Sun, 8 Jul 2018 10:00:06 +0000 (12:00 +0200)]
Keep supporting the env / make variable PERL
OpenSSL 1.1.0 supports the use of this environment variable for
passing to the build files. For the sake of backward compatibility,
we keep it.
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/6668)
Rich Salz [Mon, 9 Jul 2018 00:32:04 +0000 (20:32 -0400)]
Update AUTHORS list, add commentary
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6602)
Kurt Roeckx [Sat, 7 Jul 2018 08:55:18 +0000 (10:55 +0200)]
Update DRBG CHANGES section
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
GH: #6666
Matt Caswell [Tue, 26 Jun 2018 14:21:09 +0000 (15:21 +0100)]
Remove a memset
Also avoids calling EVP_MD_size() and a missing negative result check.
Issue found by Coverity.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)
Matt Caswell [Tue, 26 Jun 2018 14:12:56 +0000 (15:12 +0100)]
Check a return value for success in ec_field_size()
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)
Matt Caswell [Tue, 26 Jun 2018 14:10:56 +0000 (15:10 +0100)]
Fix some Coverity issues in sm2_encrypt()
Check for a negative EVP_MD_size().
Don't dereference group until we've checked if it is NULL.
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)
Matt Caswell [Tue, 26 Jun 2018 14:03:05 +0000 (15:03 +0100)]
Check md_size isn't negative before we use it
Issue found by Coverity
Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6592)
Matt Caswell [Fri, 6 Jul 2018 08:16:51 +0000 (09:16 +0100)]
Don't fail if the PSK identity doesn't match
In 1.1.0 s_server if the PSK identity doesn't match what we have then
a warning is printed and we continue the connection anyway. In 1.1.1,
if TLSv1.3 is used and the identity doesn't match then we abort the
connection. We should really be consistent with the old behaviour.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6659)
Andy Polyakov [Tue, 3 Jul 2018 19:34:08 +0000 (21:34 +0200)]
evp/e_chacha20_poly1305.c: further improve small-fragment TLS performance.
Improvement coefficients vary with TLS fragment length and platform, on
most Intel processors maximum improvement is ~50%, while on Ryzen - 80%.
The "secret" is new dedicated ChaCha20_128 code path and vectorized xor
helpers.
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6638)
Matt Caswell [Thu, 5 Jul 2018 15:53:56 +0000 (16:53 +0100)]
Document SSL_CTX_set_recv_max_early_data() etc
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)
Matt Caswell [Thu, 5 Jul 2018 14:42:36 +0000 (15:42 +0100)]
Add the ability to configure recv_max_early_data via s_server
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)
Matt Caswell [Thu, 5 Jul 2018 14:31:51 +0000 (15:31 +0100)]
Add a test for the recv_max_early_data setting
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)
Matt Caswell [Thu, 5 Jul 2018 13:40:39 +0000 (14:40 +0100)]
Introduce the recv_max_early_data setting
Previoulsy we just had max_early_data which controlled both the value of
max early_data that we advertise in tickets *and* the amount of early_data
that we are willing to receive from clients. This doesn't work too well in
the case where we want to reduce a previously advertised max_early_data
value. In that case clients with old, stale tickets may attempt to send us
more early data than we are willing to receive. Instead of rejecting the
early data we abort the connection if that happens.
To avoid this we introduce a new "recv_max_early_data" value. The old
max_early_data becomes the value that is advertised in tickets while
recv_max_early_data is the maximum we will tolerate from clients.
Fixes #6647
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6655)
Rich Salz [Thu, 5 Jul 2018 23:57:22 +0000 (19:57 -0400)]
Reject duplicate -addext parameters
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/6636)
Rich Salz [Thu, 5 Jul 2018 20:10:55 +0000 (16:10 -0400)]
Add missing include file to doc
Reported by Ingo Schwarze
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/6656)
Richard Levitte [Wed, 4 Jul 2018 07:26:05 +0000 (09:26 +0200)]
Document more EVP_MD_CTX functions
Fixes #6644
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6645)
Billy Brumley [Wed, 4 Jul 2018 12:35:18 +0000 (15:35 +0300)]
[crypto/ec] disable SCA mitigations for curves with incomplete parameters
Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/6648)