openssl-format-source: A few more (DECLARE|IMPLEMENT) variants to care for

Reviewed-by: Rich Salz <rsalz@openssl.org>

The capi engine uses stdio, so don't build it when configuring 'no-stdio'

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove OPENSSL_NO_STDIO guards around certain SSL cert/key functions

These functions are:

    SSL_use_certificate_file
    SSL_use_RSAPrivateKey_file
    SSL_use_PrivateKey_file
    SSL_CTX_use_certificate_file
    SSL_CTX_use_RSAPrivateKey_file
    SSL_CTX_use_PrivateKey_file
    SSL_use_certificate_chain_file

Internally, they use BIO_s_file(), which is defined and implemented at
all times, even when OpenSSL is configured no-stdio.

Reviewed-by: Rich Salz <rsalz@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

util/mkdef.pl: mark certain PEM function declarations with STDIO

The macros that produce PEM_write_FOO() andd PEM_read_FOO() only do so
unless 'no-stdio' has been configured.  mkdef.pl should mimic that by
marking those functions with the "STDIO" algo.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Travis: add a build with no-stdio

Reviewed-by: Rich Salz <rsalz@openssl.org>

Move the building of test/buildtest_*. to be done unconditionally

These were guarded by $disabled{tests}.  However, 'tests' is disabled
if we configure 'no-stdio', which means that we don't detect the lack
of OPENSSL_NO_STDIO guards in our public header files.  So we move the
generation and build of test/buildtest_*.c to be unconditional.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Sanity check input length in OPENSSL_uni2asc().

Thanks to Hanno Böck for reporting this bug.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add --gcov-options '\-lp' to coverage

Should result in more accurate header file coverage, see
https://github.com/eddyxu/cpp-coveralls/issues/54

Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Add a coverage target

Run tests with coverage and report to coveralls.io

For simplicity, this currently only adds a single target in a
configuration that attempts to maximize coverage. The true CI coverage
from all the various builds may be a little larger.

The coverage run has the following configuration:
- no-asm: since we can't track asm coverage anyway, might as well measure the
  non-asm code coverage.
- Enable various disabled-by-default options:
  - rc5
  - md2
  - ec_nistp_64_gcc_128
  - ssl3
  - ssl3-method
  - weak-ssl-ciphers

Finally, observe that no-pic implies no-shared, and therefore running
both builds in the matrix is redundant.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Kurt Roeckx <kurt@openssl.org>

Free buffer in a2i_ASN1_INTEGER() on error path.

Thank to Shi Lei for reporting this bug.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Make update, etc.

Reviewed-by: Richard Levitte <levitte@openssl.org>

indent: add a couple of types we use in apps

Reviewed-by: Emilia Käsper <emilia@openssl.org>

openssl-format-source: no dash marker on *INDENT-(ON|OFF)* comments

We mark small comments with a dash immediately following the starting /*.
However, *INDENT-(ON|OFF)* comments shouldn't be treated that way, or
indent will ignore them if we do.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

VMS: Fix building of bad_dtls_test

Reviewed-by: Tim Hudson <tjh@openssl.org>

Added appropriate OPENSSL_NO_STDIO to PKCS12 header

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Add basic test for Cisco DTLS1_BAD_VER and record replay handling

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix ubsan 'left shift of negative value -1' error in satsub64be()

Baroque, almost uncommented code triggers behaviour which is undefined
by the C standard. You might quite reasonably not care that the code was
broken on ones-complement machines, but if we support a ubsan build then
we need to at least pretend to care.

It looks like the special-case code for 64-bit big-endian is going to
behave differently (and wrongly) on wrap-around, because it treats the
values as signed. That seems wrong, and allows replay and other attacks.
Surely you need to renegotiate and start a new epoch rather than
wrapping around to sequence number zero again?

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Make DTLS1_BAD_VER work with DTLS_client_method()

DTLSv1_client_method() is deprecated, but it was the only way to obtain
DTLS1_BAD_VER support. The SSL_OP_CISCO_ANYCONNECT hack doesn't work with
DTLS_client_method(), and it's relatively non-trivial to make it work without
expanding the hack into lots of places.

So deprecate SSL_OP_CISCO_ANYCONNECT with DTLSv1_client_method(), and make
it work with SSL_CTX_set_{min,max}_proto_version(DTLS1_BAD_VER) instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix cipher support for DTLS1_BAD_VER

Commit 3eb2aff40 ("Add support for minimum and maximum protocol version
supported by a cipher") disabled all ciphers for DTLS1_BAD_VER.

That wasn't helpful. Give them back.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix DTLS_VERSION_xx() comparison macros for DTLS1_BAD_VER

DTLS version numbers are strange and backwards, except DTLS1_BAD_VER so
we have to make a special case for it.

This does leave us with a set of macros which will evaluate their arguments
more than once, but it's not a public-facing API and it's not like this is
the kind of thing where people will be using DTLS_VERSION_LE(x++, y) anyway.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix ossl_statem_client_max_message_size() for DTLS1_BAD_VER

The Change Cipher Spec message in this ancient pre-standard version of DTLS
that Cisco are unfortunately still using in their products, is 3 bytes.

Allow it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Fix SSL_export_keying_material() for DTLS1_BAD_VER

Commit d8e8590e ("Fix missing return value checks in SCTP") made the
DTLS handshake fail, even for non-SCTP connections, if
SSL_export_keying_material() fails. Which it does, for DTLS1_BAD_VER.

Apply the trivial fix to make it succeed, since there's no real reason
why it shouldn't even though we never need it.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

When tr gets bracketed arguments, they need to be quoted

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove some unused options from 10-main.conf

The options RC4_CHUNK_LL, DES_PTR, and BF_PTR were removed by Rich
in commit 3e9e810f2e047effb1056211794d2d12ec2b04e7 but were still
sticking around in a coupule configuration entries.

Since they're unused, remove them.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1390)

Fix output text to avoid gratuitious git diff

Reviewed-by: Richard Levitte <levitte@openssl.org>

Remove get_hash completely

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1389)

Remove "lockit" from internal error-hash function

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1389)

Limit status message sisze in ts_get_status_check

Thanks to Shi Lei for reporting this issue.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Pack globals variables used to control apps/verify_callback()

  into a structure , to avoid any accident .

Plus some few cleanups

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Ignore windows generated manifests

- Commit a95ce7f builds *.manifest files on windows -- added them to
  .gitignore.

- ignore pod -> html temp file

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Constify some ASN1_OBJECT *obj input parameters

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Constify inputs of two X509_LOOKUP_METHOD methods

... get_by_fingerprint() and get_by_alias()

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Constify input buffer

 of X509_NAME_add_entry_by_OBJ, X509_NAME_add_entry_by_NID, X509_NAME_ENTRY_create_by_NID

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Constify two internal methods
- append_ia5
- old_entry_print

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Constify ASN1_INTEGER_get, ASN1_ENUMERATED_get

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

VMS: have the IVP verify that a well known engine loads properly

Reviewed-by: Rich Salz <rsalz@openssl.org>

Have 'openssl engine' exit with non-zero when some engine fails to load

Reviewed-by: Rich Salz <rsalz@openssl.org>

VSI submission: make the VMS version of RAND_poll() faster and more secure

Reviewed-by: Rich Salz <rsalz@openssl.org>

VSI submisson: make better use of item lists in o_time.c

Reviewed-by: Rich Salz <rsalz@openssl.org>

Travis: When testing installation, build in separate dir, otherwise in checkout

The rationale is that installation from a tarball is a common task
that everyone performs.  For all other builds, we do specialised
tests, and might as well build them directly in the checkout, which
also gives us fuzz corpora.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

Prepare for 1.1.0-pre7-dev

Reviewed-by: Richard Levitte <levitte@openssl.org>

Prepare for 1.1.0-pre6 release

Reviewed-by: Richard Levitte <levitte@openssl.org>

make update

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix date in CHANGES

The release scripts expect to see the date "xx XXX xxxx" in CHANGES. At
some point the year got changed from xxxx to 2016. This changes it back.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't check any revocation info on proxy certificates

Because proxy certificates typically come without any CRL information,
trying to check revocation on them will fail.  Better not to try
checking such information for them at all.

Reviewed-by: Rich Salz <rsalz@openssl.org>

INSTALL: Make the use of [, ], { and } consistent and explain it

The diverse notations used in INSTALL are not as self explanatory as
we might imagine, so let's attempt a consistent notation for mandatory
and optional pieces of a command line, and to explain the meaning of
each notation.

This does away with the bash notation used in one spot, as it isn't
universally understood and will only confuse the unknowing more.

Reviewed-by: Rich Salz <rsalz@openssl.org>

INSTALL: Add missing details on VMS installation results

Reviewed-by: Rich Salz <rsalz@openssl.org>

VMS: make sure to provide an absolute source directory for pod2html

Experience shows that pod2html changes directory during its process
without properly adjusting the given source directory.

Reviewed-by: Rich Salz <rsalz@openssl.org>

VMS: If configured no-shared, don't provide shareable image logical names

Reviewed-by: Rich Salz <rsalz@openssl.org>

Check for overlows and error return from ASN1_object_size()

Reviewed-by: Richard Levitte <levitte@openssl.org>

Check for overflows in ASN1_object_size().

Reviewed-by: Richard Levitte <levitte@openssl.org>

80-test_ssl_new.t: only skip on $no_tls if no other skip conditions defined

Reviewed-by: Matt Caswell <matt@openssl.org>

In 80-test_ssl_new, more "plan tests" to a more useful position

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix tests for no-nextprotoneg

Fix the 80-test_ssl_test_ctx and 80-test_ssl_new tests when used with the
no-nextprotoneg option

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix some style issues...

 extra spacing and 80 cols

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1366)

Don't overwrite existing installed openssl.cnf

Instead, install the new one as openssl.cnf.dist (openssl.cnf-dist on
VMS), and only install it as openssl.cnf if that file doesn't already
exist.

Also, don't install with exec privileges on VMS.

Reviewed-by: Rich Salz <rsalz@openssl.org>

All of ssldirs installation should be done by the install_ssldirs target

The Unix build file template didn't do that quite right.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Some minor tweaks to the fuzzing docs

Reviewed-by: Rich Salz <rsalz@openssl.org>

Document certificate and CRL time functions.

RT#4639

Reviewed-by: Rich Salz <rsalz@openssl.org>

Constify some X509_CRL, X509_REQ functions.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Constify some X509_CRL functions.

Reviewed-by: Rich Salz <rsalz@openssl.org>

make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add DSA_bits() function.

RT#4637

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix typo of BN_zero()

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Forgotten make update

Reviewed-by: Rich Salz <rsalz@openssl.org>

Const the ex data stuff too to fix warnings

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Const EC_KEY_dup

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Additional CMS content types from RFC 4073, RFC 5083, and RFC 5084.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1355)

Useless allocation

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Fix some style issues

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Add missing help string

Fix an error message

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Fix some awkward tests

Add some explanatory comments
Discard some useless parenthesis.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Merge some conditional blocks of code.

Fix an #if check about rsa_count...

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Simplify default inits, add const qualifiers
Simplify some loops to reuse k variable

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Cast to right type, simplify array args

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Fix sharing of two static variables

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

ECDH test is only one operation to run

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Fix three missing global declarations.

Fix compilation without SIGALRM.
It don't link because of remaning alarm(0); call.

Convert engine_id variable to local one

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1342)

Fix return values of do_passwd() in apps/passwd.c

do_passwd() was returning 0 on success and 1 on failure.  However,
those values were interpreted the other way around.  The fix that
makes the most sense is to change what do_passwd() returns.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix bad result in i2b_PVK()

The function i2b_PVK() was returning a bad pointer causing subsequent
crashes.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix param order in RSA_get0_key

Some calls to RSA_get0_key had the parameters in the wrong order causing a
failure.

GitHub Issue #1368

Reviewed-by: Richard Levitte <levitte@openssl.org>

Include what we use.

Reviewed-by: Rich Salz <rsalz@openssl.org>

peer_tmp doesn't exist if no-ec no-dh.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix various no-*s.

Reviewed-by: Rich Salz <rsalz@openssl.org>

crypto/ui/ui_openssl.c: UTF-y Windows code path.

Windows never composes UTF-8 strings as result of user interaction
such as input query. The only way to compose one is programmatic
conversion from WCHAR string, which in turn can be picked up with
ReadConsoleW.

Reviewed-by: Richard Levitte <levitte@openssl.org>

apps/openssl.c: UTF-y Windows argv.

Windows never composes UTF-8 strings as result of user interaction
such as passing command-line argument. The only way to compose one
is programmatic conversion from WCHAR string, which in turn can be
picked up on command line.

[For reference, why not wmain, it's not an option on MinGW.]

Reviewed-by: Richard Levitte <levitte@openssl.org>

Configurations/00-base-templates.conf: harmonize BASE_Windows.

Reviewed-by: Richard Levitte <levitte@openssl.org>

Configurations/unix-Makefile.tmpl: add LC_ALL=C to unify messages.

RT#4138

Reviewed-by: Rich Salz <rsalz@openssl.org>

evp/bio_enc.c: perform enc_read operation without using overlapping buffers.

Reviewed-by: Stephen Henson <steve@openssl.org>

test/smcont.txt: trigger assertion in bio_enc.c.

Reviewed-by: Stephen Henson <steve@openssl.org>

evp/evp_enc.c: make assert error message more readable
and add EVPerr(PARTIALLY_OVERLAPPED)

Reviewed-by: Stephen Henson <steve@openssl.org>

Fix the docs too

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1367)

Ignore the serial number for now and just do the rest.

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1367)

Make some more X509 functions const.

Reviewed-by: Stephen Henson <steve@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1367)

rsa.c: fix incorrect guard for pvk-* options

This update syncs the #if guard protecting the pvk-* options
with the rest of the source handling those options. Also fix
some nearby whitespace.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1365)

Fix crash as a result of MULTIBLOCK

The MULTIBLOCK code uses a "jumbo" sized write buffer which it allocates
and then frees later. Pipelining however introduced multiple pipelines. It
keeps track of how many pipelines are initialised using numwpipes.
Unfortunately the MULTIBLOCK code was not updating this when in deallocated
its buffers, leading to a buffer being marked as initialised but set to
NULL.

RT#4618

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix bogus warnings

Fix some bogus "may be used uninitialized" warnings on some compilers.

Reviewed-by: Rich Salz <rsalz@openssl.org>

print out MAC algorithm

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix CRL time comparison.

Thanks to David Benjamin <davidben@google.com> for reporting this bug.

Reviewed-by: Rich Salz <rsalz@openssl.org>