Bernhard Reutner-Fischer [Fri, 2 Mar 2018 16:39:36 +0000 (17:39 +0100)]
brctl: use a single buffer for brname and ifname
function old new delta
brctl_main 1681 1675 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-6) Total: -6 bytes
Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
Denys Vlasenko [Sun, 30 Sep 2018 14:56:56 +0000 (16:56 +0200)]
unzip: use printable_string() for printing filenames
function old new delta
unzip_main 2726 2792 +66
printable_string2 - 57 +57
identify 4329 4336 +7
expmeta 659 663 +4
add_interface 99 103 +4
beep_main 286 289 +3
changepath 192 194 +2
builtin_type 115 117 +2
devmem_main 469 470 +1
input_tab 1076 1074 -2
create_J 1821 1819 -2
poplocalvars 314 311 -3
doCommands 2222 2214 -8
do_load 918 902 -16
printable_string 57 9 -48
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 8/6 up/down: 146/-79) Total: 67 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Brandon Maier [Fri, 21 Sep 2018 17:54:05 +0000 (12:54 -0500)]
ifupdown: support "source-directory" stanza
Support the "source-directory" stanza from ifupdown[1]. source-directory
will include all files in the named directory. Similar to the Busybox
version of the "source" stanza, this version of source-directory does
not currently support shell wildcards.
We only check that the stanza starts with "source-dir" as ifupdown does[2].
[1] https://manpages.debian.org/stretch/ifupdown/interfaces.5.en.html#INCLUDING_OTHER_FILES
[2] https://salsa.debian.org/debian/ifupdown/blob/0.8.33/config.c#L498
function old new delta
read_interfaces 1150 1241 +91
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 28 Sep 2018 13:13:04 +0000 (15:13 +0200)]
move storage helpers to libbb.h
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 28 Sep 2018 12:44:09 +0000 (14:44 +0200)]
udhcpc: give SIGUSR1-induced renew one chance of unicast renew
The caps were inconsistent: timeout to renew was capped at 20 seconds,
and any renews with timeout <= 60 seconds were forced to broadcast.
function old new delta
udhcpc_main 2683 2680 -3
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Martin Kaiser [Mon, 24 Sep 2018 19:00:47 +0000 (21:00 +0200)]
.gitignore: add ctags output files
Exuberant ctags creates an output file called "tags" by default or
"TAGS" when it's run in emacs mode. Add those two files to .gitignore so
they won't be removed by git clean -df.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Martin Kaiser [Mon, 24 Sep 2018 19:01:51 +0000 (21:01 +0200)]
mdev.txt: explain the meaning of a leading "-"
If a line in mdev.conf starts with "-", parsing will continue even if
a match is found in that line.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 25 Sep 2018 10:50:54 +0000 (12:50 +0200)]
sed: fix double-free in FEATURE_CLEAN_UP code
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 23 Sep 2018 18:27:32 +0000 (20:27 +0200)]
date: do not allow "month #20" and such, closes 11356
function old new delta
parse_datestr 906 961 +55
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Thomas De Schampheleire [Thu, 13 Sep 2018 13:01:46 +0000 (15:01 +0200)]
head: convert existing tests to new-style
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Thomas De Schampheleire [Thu, 13 Sep 2018 13:01:45 +0000 (15:01 +0200)]
head: add test case for negative -n invocation
Commit
2da9724b56169f00bd7fb6b9a11c9409a7620981 broke 'head -n -1' and was
later reverted with
0d598ab9f03dbf320f7b81c05e4a94cb303dfbc7.
This commit adds a test case to avoid future breakage.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 22 Sep 2018 17:30:40 +0000 (19:30 +0200)]
init: hopefully fix "rebooting" in containers
function old new delta
pause_and_low_level_reboot 48 57 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 13 Sep 2018 10:15:36 +0000 (12:15 +0200)]
ntpd: more verbose message for "root distance too high" case
Managed to make ntpd on one of my machines to be stuck getting
"root distance too high" all the time, but log is not giving me
more informatin what exactly is happening...
function old new delta
select_and_cluster 1045 1095 +50
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Chen Yu [Tue, 4 Sep 2018 07:26:22 +0000 (15:26 +0800)]
remove_file: don't call rmdir if remove_file return failure
When deleting a directory, the directory should not be removed if the
file in the subdirectory fails to be deleted.
Background information:
When I tested the kernel using LTP (linux-test-project).I found the
mv command have some issue. The LTP test case use the mv command to
move the directory t1 in the cgroup file system to the /tmp directory.
becase files in the cgroup file system are not allowed to be removed.
so the mv reported "Permission denied", but I used the ls command to
view the results and found that the directory t1 had been removed
from the cgroup file system. For the same test case, I used the mv
tool in the GNU coreutils, and the directory t1 will not be removed.
the following testcase use busybox mv:
/ # mount -t cgroup -o cpu cgroup /cpu
/ # cd /cpu
/cpu # mkdir -p t1
/cpu # ls
cgroup.clone_children cpu.cfs_period_us cpu.stat t1
cgroup.procs cpu.cfs_quota_us notify_on_release tasks
cgroup.sane_behavior cpu.shares release_agent
/cpu # mv t1 /tmp
mv: can't remove 't1/cgroup.procs': Operation not permitted
mv: can't remove 't1/cpu.cfs_period_us': Operation not permitted
mv: can't remove 't1/cpu.stat': Operation not permitted
mv: can't remove 't1/cpu.shares': Operation not permitted
mv: can't remove 't1/cpu.cfs_quota_us': Operation not permitted
mv: can't remove 't1/tasks': Operation not permitted
mv: can't remove 't1/notify_on_release': Operation not permitted
mv: can't remove 't1/cgroup.clone_children': Operation not permitted
/cpu # ls
cgroup.clone_children cpu.cfs_period_us cpu.stat cgroup.procs
cpu.cfs_quota_us notify_on_release tasks cgroup.sane_behavior
cpu.shares release_agent
/cpu #
This patch fixed it, don't call rmdir if remove_file return failure,
and under certain file systems, the mv could work normally.
Signed-off-by: Chen Yu <yu.chen3@zte.com.cn>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 4 Sep 2018 12:48:00 +0000 (14:48 +0200)]
whois: fix a possible out-of-bounds stack access
If fgets() returns incomplete string, we replace NUL with
'\n', and then trim() runs on a non-NUL-terminated buffer.
Prevent that.
While at it, bump buffer from 1k to 2k.
function old new delta
query 519 524 +5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
sagivd [Sat, 25 Aug 2018 10:49:24 +0000 (13:49 +0300)]
chcon: fix issues with recurse and retval for retained files
- recurse is not acting as expected (looks like broken old code)
- when not using verbose output, return value for retained files is 1,
which is not expected.
Signed-off-by: sagivd <sagivdev@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 3 Sep 2018 08:36:51 +0000 (10:36 +0200)]
libbb: fix potential NULL pointer use
function old new delta
unicode_conv_to_printable2 193 216 +23
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 3 Sep 2018 08:25:29 +0000 (10:25 +0200)]
libbb: fix use-after-free in copy_file
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 2 Sep 2018 16:48:09 +0000 (18:48 +0200)]
libbb: in xmalloc_fgets(), use size_t for bb_get_chunk_from_file()
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 2 Sep 2018 16:35:29 +0000 (18:35 +0200)]
Revert "libbb: remove unnecessary variable in xmalloc_fgets"
The variable is in fact necessary.
commit
2da9724b56169f00bd7fb6b9a11c9409a7620981
Author: Quentin Rameau <quinq@fifth.space>
Date: Sun Apr 1 17:05:35 2018 +0200
libbb: remove unnecessary variable in xmalloc_fgets
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 30 Aug 2018 09:49:51 +0000 (11:49 +0200)]
smemcap: keep outputting by ignoring transient processes, take two
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Andre Goddard Rosa [Sun, 26 Aug 2018 15:37:30 +0000 (17:37 +0200)]
smemcap: keep outputting by ignoring transient processes
function old new delta
archivefile 167 176 +9
Signed-off-by: Andre Goddard Rosa <andre.rosa@lge.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Peter Korsgaard [Thu, 9 Aug 2018 09:25:22 +0000 (11:25 +0200)]
sysklogd: add timestamp option to ignore message timestamps
Some syslog producers provide inconsistent timestamps, so provide an option
to ignore the message timestamps and always locally timestamp. In order to
implement this, invert the valid-timestamp check, but only use the timestamp
if this option is not enabled.
This is in line with what what other syslogd implementations do:
From sysklogd syslogd.c:
* Sun Nov 7 12:28:47 CET 2004: Martin Schulze <joey@infodrom.org>
* Discard any timestamp information found in received syslog
* messages. This will affect local messages sent from a
* different timezone.
rsyslog's imuxsock module similary has an (enabled by default)
IgnoreTimestamp option:
https://www.rsyslog.com/doc/v8-stable/configuration/modules/imuxsock.html
function old new delta
packed_usage 32877 32912 +35
timestamp_and_log 363 376 +13
syslogd_main 1638 1641 +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 51/0) Total: 51 bytes
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 26 Aug 2018 14:32:16 +0000 (16:32 +0200)]
fix !CONFIG_FLOAT_DURATION build
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 25 Aug 2018 17:36:06 +0000 (19:36 +0200)]
ping: use setitimer() instead of ualarm()
function old new delta
sendping_tail 218 265 +47
ualarm 79 - -79
------------------------------------------------------------------------------
(add/remove: 0/2 grow/shrink: 1/0 up/down: 47/-79) Total: -32 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 14 Aug 2018 09:19:09 +0000 (11:19 +0200)]
ip: tweak --help text
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 14 Aug 2018 09:04:58 +0000 (11:04 +0200)]
hush: tweak comment, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 11 Aug 2018 16:44:11 +0000 (18:44 +0200)]
hush: add a comment on how globbing (should) work
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 7 Aug 2018 16:54:52 +0000 (18:54 +0200)]
ash: expand: Do not quote backslashes in unquoted parameter expansion
Upstream commit:
Date: Wed, 28 Mar 2018 18:37:51 +0800
expand: Do not quote backslashes in unquoted parameter expansion
Here is a better example:
a="/*/\nullx" b="/*/\null"; printf "%s\n" $a $b
dash currently prints
/*/\nullx
/*/\null
bash prints
/*/\nullx
/dev/null
You may argue the bash behaviour is inconsistent but it actually
makes sense. What happens is that quote removal only applies to
the original token as seen by the shell. It is never applied to
the result of parameter expansion.
Now you may ask why on earth does the second line say "/dev/null"
instead of "/dev/\null". Well that's because it is not the quote
removal step that removed the backslash, but the pathname expansion.
The fact that the /de\v does not become /dev even though it exists
is just the result of the optimisation to avoid unnecessarily
calling stat(2). I have checked POSIX and I don't see anything
that forbids this behaviour.
So going back to dash yes I think we should adopt the bash behaviour
for pathname expansion and keep the existing case semantics.
This patch does exactly that. Note that this patch does not work
unless you have already applied
https://patchwork.kernel.org/patch/
10306507/
because otherwise the optimisation mentioned above does not get
detected correctly and we will end up doing quote removal twice.
This patch also updates expmeta to handle naked backslashes at
the end of the pattern which is now possible.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
expmeta 618 653 +35
memtodest 146 147 +1
Tested to work with both ASH_INTERNAL_GLOB on and off.
hush does not handle this correctly.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 18:03:04 +0000 (20:03 +0200)]
hush: adopt ash's quote_in_varexp1.tests
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 16:04:09 +0000 (18:04 +0200)]
ash: exec: Return 126 on most errors in shellexec
Upstream commit:
Date: Sat, 19 May 2018 02:39:37 +0800
exec: Return 126 on most errors in shellexec
Currently when shellexec fails on most errors the shell will exit
with exit status 2. This patch changes it to 126 in order to avoid
ambiguities with the exit status from a successful exec.
The errors that result in 127 has also been expanded to include
ENOTDIR, ENAMETOOLONG and ELOOP.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
shellexec 245 254 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 15:07:26 +0000 (17:07 +0200)]
ash: eval: Restore input files in evalcommand
Upstream commit:
Date: Tue, 27 Mar 2018 00:39:35 +0800
eval: Restore input files in evalcommand
When evalcommand invokes a command that modifies parsefile and
then bails out without popping the file, we need to ensure the
input file is restored so that the shell can continue to execute.
Reported-by: Martijn Dekker <martijn@inlv.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
unwindfiles - 20 +20
evalcommand 1635 1653 +18
getoptscmd 584 595 +11
popallfiles 20 10 -10
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 49/-10) Total: 39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 13:58:13 +0000 (15:58 +0200)]
ash: parser: Fix parsing of ${}
Upstream commit:
Date: Tue, 3 Apr 2018 00:40:25 +0800
parser: Fix parsing of ${}
dash -c 'echo ${}' should print "Bad subtitution" but instead
fails with "Syntax error: Missing '}'". This is caused by us
reading an extra character beyond the right brace. This patch
fixes it so that this construct only fails during expansion rather
than during parsing.
Fixes:
3df3edd13389 ("[PARSER] Report substition errors at...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
readtoken1 2907 2916 +9
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 13:42:29 +0000 (15:42 +0200)]
ash,hush: fold shell_builtin_read() way-too-many params into a struct param
function old new delta
getoptscmd 587 584 -3
readcmd 240 224 -16
shell_builtin_read 1426 1399 -27
builtin_read 210 182 -28
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-74) Total: -74 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 13:13:08 +0000 (15:13 +0200)]
hush: set IFS to default on startup
function old new delta
hush_main 1095 1110 +15
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 12:55:01 +0000 (14:55 +0200)]
hush: fix fallout from FILE->HFILE conversion
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 12:29:58 +0000 (14:29 +0200)]
ash: expand: Fix ghost fields with unquoted $@/$*
Upstream commit:
Date: Fri, 23 Mar 2018 18:58:47 +0800
expand: Fix ghost fields with unquoted $@/$*
You're right. The proper fix to this is to ensure that nulonly
is not set in varvalue for $*. It should only be set for $@ when
it's inside double quotes.
In fact there is another bug while we're playing with $@/$*.
When IFS is set to a non-whitespace character such as :, $*
outside quotes won't remove empty fields as it should.
This patch fixes both problems.
Reported-by: Martijn Dekker <martijn@inlv.org>
Suggested-by: Harald van Dijk <harald@gigawatt.nl>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
argstr 1111 1113 +2
evalvar 571 569 -2
varvalue 579 576 -3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/2 up/down: 2/-5) Total: -3 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 11:59:35 +0000 (13:59 +0200)]
ash: var: Set IFS to fixed value at start time
Upstream commit:
Date: Sat, 19 May 2018 02:39:43 +0800
var: Set IFS to fixed value at start time
This patch forces the IFS variable to always be set to its default
value, regardless of the environment.
It also removes the long unused IFS_BROKEN code.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sun, 5 Aug 2018 08:39:18 +0000 (10:39 +0200)]
ash: eval: Variable assignments on functions are no longer persistent
Upstream commit:
Date: Wed, 4 Apr 2018 17:54:01 +0800
eval: Variable assignments on functions are no longer persistent
Dirk Fieldhouse <fieldhouse@gmx.net> wrote:
> In POSIX.1-2017 ("simultaneously IEEE Std 1003.1™-2017 and The Open
> Group Technical Standard Base Specifications, Issue 7")
> <http://pubs.opengroup.org/onlinepubs/
9699919799/utilities/V3_chap02.html#tag_18_09>,
> we read under '2.9.1 Simple Commands'
>
> "Variable assignments shall be performed as follows:
> ...
> - If the command name is a standard utility implemented as a function
> (see XBD Utility), the effect of variable assignments shall be as if the
> utility was not implemented as a function.
> ...
> - If the command name is a function that is not a standard utility
> implemented as a function, variable assignments shall affect the current
> execution environment during the execution of the function. It is
> unspecified:
>
> * Whether or not the variable assignments persist after the
> completion of the function
>
> * Whether or not the variables gain the export attribute during
> the execution of the function
>
> * Whether or not export attributes gained as a result of the
> variable assignments persist after the completion of the function (if
> variable assignments persist after the completion of the function)"
POSIX used to require the current dash behaviour. However, you're
right that this is no longer the case.
This patch will remove the persistence of the variable assignment.
I have considered the exporting the variables during the function
execution but have decided against it because:
1) It makes the code bigger.
2) dash has never done this in the past.
3) You cannot use this portably anyway.
Reported-by: Dirk Fieldhouse <fieldhouse@gmx.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
function old new delta
evalcommand 1606 1635 +29
evalcase 313 317 +4
evalfun 280 268 -12
pushlocalvars 48 - -48
------------------------------------------------------------------------------
(add/remove: 0/1 grow/shrink: 2/1 up/down: 33/-60) Total: -27 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 4 Aug 2018 20:25:28 +0000 (22:25 +0200)]
ash,hush: properly handle ${v//pattern/repl} if pattern starts with /
Closes 2695
function old new delta
parse_dollar 762 790 +28
subevalvar 1258 1267 +9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 37/0) Total: 37 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 4 Aug 2018 19:06:02 +0000 (21:06 +0200)]
tar: fix a thinko in prev commit - we need to copy to _unused_ fd
function old new delta
vfork_compressor 257 246 -11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 4 Aug 2018 16:15:19 +0000 (18:15 +0200)]
tar: handle the case when opened created tarball happens to have fd#0
Reproducer:
exec 0>&-
exec 1>&-
tar czf z.tar.gz FILE
function old new delta
vfork_compressor 229 257 +28
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 4 Aug 2018 15:48:59 +0000 (17:48 +0200)]
tar: make source code a bit more terse, no logic changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 3 Aug 2018 17:53:49 +0000 (19:53 +0200)]
uptime: add -s support
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 3 Aug 2018 16:51:46 +0000 (18:51 +0200)]
Complie libbb/duration.c if ping[6] is selected
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 3 Aug 2018 16:50:50 +0000 (18:50 +0200)]
ping: implement -i SEC
function old new delta
common_ping_main 1862 1968 +106
ualarm - 79 +79
packed_usage 32858 32897 +39
sendping_tail 204 218 +14
------------------------------------------------------------------------------
(add/remove: 5/0 grow/shrink: 3/0 up/down: 320/0) Total: 320 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 3 Aug 2018 16:27:00 +0000 (18:27 +0200)]
timeout: fix arguments to match coreutils
Was: timeout [-t SECS] [-s SIG] PROG ARGS
Is: timeout [-s SIG] SECS PROG ARGS
function old new delta
timeout_main 312 319 +7
packed_usage 32882 32858 -24
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 7/-24) Total: -17 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 3 Aug 2018 16:17:12 +0000 (18:17 +0200)]
extend fractional duration support to "top -d N.N" and "timeout"
function old new delta
parse_duration_str - 168 +168
sleep_for_duration - 157 +157
top_main 885 928 +43
timeout_main 269 312 +43
handle_input 571 614 +43
duration_suffixes - 40 +40
sfx 40 - -40
sleep_main 364 79 -285
------------------------------------------------------------------------------
(add/remove: 4/1 grow/shrink: 3/1 up/down: 494/-325) Total: 169 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 3 Aug 2018 09:03:55 +0000 (11:03 +0200)]
ntpd: show real, unclamped delays on low-latency networks
On fast network, I've seen "delay:0.002000" shown for all packets,
thus completely losing information on what real delays are.
The new code is careful to not reject packets with tiny delays
if the delay "grows a lot" but is still tiny:
0.000009 is "much larger" than 0.000001 (nine times larger),
but is still very good small delay.
function old new delta
recv_and_process_peer_pkt 863 889 +26
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Lauri Kasanen [Wed, 1 Aug 2018 16:51:17 +0000 (19:51 +0300)]
ls: When -h is passed, the total should also be in human units
Signed-off-by: Lauri Kasanen <cand@gmx.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 1 Aug 2018 17:42:46 +0000 (19:42 +0200)]
nslookup: add support for search domains, closes 11161
function old new delta
parse_resolvconf - 311 +311
add_query_with_search - 105 +105
nslookup_main 873 757 -116
------------------------------------------------------------------------------
(add/remove: 2/0 grow/shrink: 0/1 up/down: 416/-116) Total: 300 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 1 Aug 2018 16:29:41 +0000 (18:29 +0200)]
cp: placate gcc8
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Jon Kolb [Wed, 1 Aug 2018 01:30:24 +0000 (21:30 -0400)]
Add chroot support to chpasswd
function old new delta
.rodata 170689 170724 +35
packed_usage 32850 32876 +26
chpasswd_main 411 436 +25
chpasswd_longopts 34 41 +7
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 93/0) Total: 93 bytes
Signed-off-by: Jon Kolb <kolbyjack@gmail.com>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 1 Aug 2018 11:36:36 +0000 (13:36 +0200)]
udhcpc: add a cooment about sanitizing DHCP_DOMAIN_NAME, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 1 Aug 2018 11:16:05 +0000 (13:16 +0200)]
udhcpc: do in fact not allow hostname components which start with dash
function old new delta
xmalloc_optname_optval 879 893 +14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 31 Jul 2018 16:07:20 +0000 (18:07 +0200)]
sendmail: use on-stack buffer for AUTH PLAIN
function old new delta
sendmail_main 1335 1307 -28
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 31 Jul 2018 15:36:31 +0000 (17:36 +0200)]
sendmail: code shrink 2
function old new delta
sendmail_main 1366 1335 -31
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 31 Jul 2018 15:30:08 +0000 (17:30 +0200)]
sendfile: code shrink
function old new delta
printstr_base64 - 22 +22
printbuf_base64 - 11 +11
printfile_base64 - 9 +9
makemime_main 305 294 -11
encode_n_base64 236 223 -13
sendmail_main 1380 1366 -14
encode_base64 36 - -36
------------------------------------------------------------------------------
(add/remove: 3/1 grow/shrink: 0/3 up/down: 42/-74) Total: -32 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Raffaello D. Di Napoli [Tue, 26 Jun 2018 23:17:45 +0000 (19:17 -0400)]
sendmail: support AUTH PLAIN in addition to AUTH LOGIN
Implement the -am argument to allow choosing an AUTH method.
For now only PLAIN and LOGIN are supported, but others can be added
easily in the future.
AUTH PLAIN required adding a new variant of encode_base64() capable of
handling NUL characters in the input string; the old function is now a
wrapper for the newer one.
function old new delta
encode_n_base64 - 236 +236
sendmail_main 1199 1380 +181
packed_usage 32873 32877 +4
encode_base64 242 36 -206
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 2/1 up/down: 421/-206) Total: 215 bytes
Signed-off-by: Raffaello D. Di Napoli <rafdev@dinapo.li>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 31 Jul 2018 14:50:26 +0000 (16:50 +0200)]
klogd: code shrink
function old new delta
klogd_main 511 486 -25
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Baruch Siach [Tue, 17 Jul 2018 10:40:45 +0000 (13:40 +0300)]
install.sh: don't clobber dangling symlinks
Symlinks in a subdirectory that is to become target rootfs are sometimes
dangling because they link to canonical file names that are not present
on the host, but are present relative to the target rootfs root. Don't
copy over dangling symlinks when noclobber is enabled
The -e test treats dangling symlinks as non-existent files. Add -h test
that returns true for all symlinks.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 31 Jul 2018 13:25:00 +0000 (15:25 +0200)]
klogd: better help text
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 31 Jul 2018 08:36:29 +0000 (10:36 +0200)]
hush: speed up ${var:+ARG} for literal ARGs
function old new delta
first_special_char_in_vararg - 52 +52
expand_one_var 2248 2296 +48
encode_then_expand_vararg 357 336 -21
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 100/-21) Total: 79 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 28 Jul 2018 10:42:08 +0000 (12:42 +0200)]
hush: fix another case where empty "for" wasn't setting exitcode to 0
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 28 Jul 2018 10:16:30 +0000 (12:16 +0200)]
hush: disable debug_indent increment/decrement for HUSH_DEBUG < 2 builds
function old new delta
run_list 1063 1046 -17
parse_stream 2296 2249 -47
run_pipe 1890 1840 -50
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-114) Total: -114 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Sat, 28 Jul 2018 10:13:58 +0000 (12:13 +0200)]
hush: make "set -x" output don't redirectable when fd#2 redirected
function old new delta
x_mode_print_optionally_squoted - 120 +120
x_mode_flush - 68 +68
save_fd_on_redirect 208 243 +35
x_mode_prefix - 27 +27
x_mode_addblock - 23 +23
x_mode_addchr - 17 +17
dump_cmd_in_x_mode 110 85 -25
run_pipe 1919 1890 -29
print_optionally_squoted 145 - -145
------------------------------------------------------------------------------
(add/remove: 5/1 grow/shrink: 1/2 up/down: 290/-199) Total: 91 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 27 Jul 2018 15:42:38 +0000 (17:42 +0200)]
hush: make "set -x" output closer to bash
function old new delta
print_optionally_squoted - 145 +145
run_pipe 1902 1919 +17
dump_cmd_in_x_mode 142 110 -32
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 162/-32) Total: 130 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 27 Jul 2018 12:12:05 +0000 (14:12 +0200)]
hush: fix "set -x" output prefix overlapping for v="..`cmd`.." case
Was printing initial "+" prefix for the assignment, that printing
"+ cmd"
then printing the expanded " v=VAL" string.
Delay printing of "+" prefix for the assignment to after expansion.
function old new delta
run_pipe 1883 1902 +19
builtin_eval 127 133 +6
expand_vars_to_list 1103 1106 +3
dump_cmd_in_x_mode 144 142 -2
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/1 up/down: 28/-2) Total: 26 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 27 Jul 2018 10:14:39 +0000 (12:14 +0200)]
hush: in some cases, expand_on_ifs() relied of uninitialized memory
The n > 0 check to prevent access to the last byte of non-existing argv[-1]
wasn't enough. Switched to making sure there are initialized (zero) bytes there.
A predictable testcase is rather hard to construct, unfortunately,
contents of memory depends on allocator behavior and whatnot.
function old new delta
o_save_ptr_helper 119 137 +18
expand_on_ifs 345 339 -6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 18/-6) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 26 Jul 2018 13:21:50 +0000 (15:21 +0200)]
hush: improve set -x: make "+++" indent level increase in `cmd` and eval.
function old new delta
dump_cmd_in_x_mode 126 144 +18
run_pipe 1873 1883 +10
builtin_eval 119 127 +8
expand_vars_to_list 1100 1103 +3
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 4/0 up/down: 39/0) Total: 39 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 26 Jul 2018 11:45:33 +0000 (13:45 +0200)]
examples/var_service: add /var/run flag file to ntp.script
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 25 Jul 2018 12:58:49 +0000 (14:58 +0200)]
htpd: increase MIN_FREQHOLD by 3
This means we'll start correcting frequency ~5 minutes after start,
not ~3.5 ones.
With previos settings I still often see largish ~0.7s initial offsets
only about 1/2 corrected before frequency correction kicks in,
resulting in ~200ppm "correction" which is then slowly undone.
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 25 Jul 2018 12:42:53 +0000 (14:42 +0200)]
fdisk: code shrink
function old new delta
get_nonexisting_partition 119 104 -15
fdisk_main 2640 2622 -18
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-33) Total: -33 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 25 Jul 2018 11:45:36 +0000 (13:45 +0200)]
fdisk: sync up with some util-linux 2.31 behavior
= display default is no longer in cylinders
= +sizeC is no longer supported
= add +sizeT suffix - terabytes are here
= K,M,G,T and k,m,g,t suffixes all are binary, not decimal
= +sizeM results in last sector +(size * 1Mbyte - 1), not +(size * 1Mbyte)
= fix comparison to "YES" answer for sgi/sun
function old new delta
read_int 492 519 +27
fdisk_main 2644 2640 -4
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 27/-4) Total: 23 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 25 Jul 2018 10:08:26 +0000 (12:08 +0200)]
fdisk: use strtoul[l] instead of atoi, closes 11176
Couldn't create partitions bigger than 1TB (when using 512 bytes sectors,
on 32 bits architectures).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 24 Jul 2018 19:12:58 +0000 (21:12 +0200)]
gzip: unbreak FEATURE_GZIP_LEVELS, closes 11171
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 24 Jul 2018 16:01:22 +0000 (18:01 +0200)]
hush: fix/explain corner cases of redirection colliding with script fd
function old new delta
save_fd_on_redirect 200 208 +8
run_pipe 1870 1873 +3
setup_redirects 321 322 +1
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 3/0 up/down: 12/0) Total: 12 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 24 Jul 2018 15:08:04 +0000 (17:08 +0200)]
hush: add "heredoc.tests" from ash, tweak ash "is a function" message
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 24 Jul 2018 14:54:41 +0000 (16:54 +0200)]
hush: fix nested redirects colliding with script fds
This necessitates switch from libc FILE api to a simple
homegrown replacement.
The change which fixes the bug here is the deleting of
restore_redirected_FILEs();
line. It was prematurely moving (restoring) script fd#3.
The fix is: we don't even _want_ to restore scrit fds,
we are perfectly fine with them being moved.
The only reason we tried to restore them is that FILE api
did not allow moving of FILE->fd.
function old new delta
refill_HFILE_and_getc - 93 +93
hfopen - 90 +90
hfclose - 66 +66
pseudo_exec_argv 591 597 +6
hush_main 1089 1095 +6
builtin_source 209 214 +5
save_fd_on_redirect 197 200 +3
setup_redirects 320 321 +1
fgetc_interactive 235 236 +1
i_peek_and_eat_bkslash_nl 99 97 -2
expand_vars_to_list 1103 1100 -3
restore_redirects 99 52 -47
fclose_and_forget 57 - -57
remember_FILE 63 - -63
------------------------------------------------------------------------------
(add/remove: 3/2 grow/shrink: 6/3 up/down: 271/-172) Total: 99 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 24 Jul 2018 12:03:18 +0000 (14:03 +0200)]
hush: handle backslash-newline in heredoc terminators
function old new delta
fetch_heredocs 479 527 +48
(ash fails this test)
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 24 Jul 2018 11:03:03 +0000 (13:03 +0200)]
hush: fix handling of heredocs not enclosed in groups where they are "declared"
function old new delta
fetch_heredocs - 479 +479
parse_and_run_stream 146 148 +2
parse_stream 2787 2296 -491
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/1 up/down: 481/-491) Total: -10 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 23 Jul 2018 14:31:21 +0000 (16:31 +0200)]
hush: fix heredoc handling in the "cmd <<EOF ;<newline>" case
function old new delta
parse_stream 2759 2787 +28
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 23 Jul 2018 13:43:57 +0000 (15:43 +0200)]
hush: fix handling of heredocs starting with empty lines
function old new delta
parse_stream 2748 2759 +11
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Mon, 23 Jul 2018 12:21:07 +0000 (14:21 +0200)]
hexedit: fixes for redraw and down movement causing SEGV on attempt to access
"Go to:" command was not updating row position, making next "down" movements
for one screenful print empty lines instead of showing the contents.
If the file is whole pages long, "down" movement at EOF was advancing position
+16 bytes, mapping the next portion (entirely past the end of the file),
then finding out that the new position is beyond the EOF, rolling it back
-16 bytes... ending up with this postion pointing *before* the mapped portion.
Any next access (e.g. "move right" key) SEGVs.
function old new delta
hexedit_main 1170 1184 +14
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 20 Jul 2018 17:29:41 +0000 (19:29 +0200)]
hush: never glob result of dquoted "${v:+/bin/c*}"
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 20 Jul 2018 17:11:09 +0000 (19:11 +0200)]
hush: tidy up code after previous commits
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 20 Jul 2018 15:51:31 +0000 (17:51 +0200)]
hush: better names for o_free_unsafe() / o_free(), no logic changes
o_free() made o_string NULL-initialized,
o_free_unsafe() did not bother reinitializing (expected caller to not need it).
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 20 Jul 2018 15:36:06 +0000 (17:36 +0200)]
hush: fix handling of '' in ${var:+ARG}
This wasn't an ash bug in dollar_altvalue9, it was hush bug (and bash!)
function old new delta
expand_one_var 2236 2254 +18
expand_vars_to_list 1097 1103 +6
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/0 up/down: 24/0) Total: 24 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 20 Jul 2018 14:18:59 +0000 (16:18 +0200)]
hush: fix word splitting in ${v:+ARG} - dollar_altvalue1 test
ash might be a bit buggy, need to investigate dollar_altvalue9 test
function old new delta
expand_one_var 1639 2236 +597
expand_variables 112 128 +16
expand_vars_to_list 1117 1097 -20
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 2/1 up/down: 613/-20) Total: 593 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 20 Jul 2018 12:45:12 +0000 (14:45 +0200)]
hush: expand_vars_to_list() should not assume it starts new word
function old new delta
expand_variables 112 115 +3
expand_vars_to_list 1117 1108 -9
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 3/-9) Total: -6 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Fri, 20 Jul 2018 12:24:56 +0000 (14:24 +0200)]
hush: remove pointless "next" var, simplify expand_vars_to_list()
function old new delta
o_addstr - 26 +26
expand_vars_to_list 1112 1117 +5
encode_then_expand_vararg 398 382 -16
parse_dollar 779 762 -17
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/2 up/down: 31/-33) Total: -2 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 19 Jul 2018 11:45:54 +0000 (13:45 +0200)]
hush: store "ended_in_ifs" flag in o_string
This simplifies function parameter passing.
function old new delta
expand_one_var 1643 1639 -4
append_str_maybe_ifs_split 64 52 -12
expand_vars_to_list 1125 1112 -13
expand_on_ifs 361 345 -16
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/4 up/down: 0/-45) Total: -45 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 19 Jul 2018 10:14:47 +0000 (12:14 +0200)]
hush: propagate (output,n) parameters into expand_one_var()
This is necessary since expand_one_var() for ${var:+ARG} must create more than one
output word, and thus can't simply return a char*.
function old new delta
expand_one_var 1610 1643 +33
expand_vars_to_list 1139 1125 -14
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 1/1 up/down: 33/-14) Total: 19 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Thu, 19 Jul 2018 09:16:53 +0000 (11:16 +0200)]
hush: make expand_vars_to_list() a bit more sane
function old new delta
append_str_maybe_ifs_split - 64 +64
expand_vars_to_list 1167 1139 -28
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 0/1 up/down: 64/-28) Total: 36 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 18 Jul 2018 14:12:23 +0000 (16:12 +0200)]
hush: reduce indentation, no code changes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 18 Jul 2018 14:02:25 +0000 (16:02 +0200)]
hush: fix 'x=; echo ${x:-"$@"}' producing 'BUG in varexp2' message
function old new delta
expand_string_to_string 126 128 +2
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Wed, 18 Jul 2018 13:48:53 +0000 (15:48 +0200)]
hush: smaller code to set o_string to ""
function old new delta
encode_then_expand_vararg 399 398 -1
parse_stream 2753 2748 -5
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 17 Jul 2018 13:04:17 +0000 (15:04 +0200)]
whitespace fixes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 17 Jul 2018 12:33:19 +0000 (14:33 +0200)]
hush: faster/smaller code to check for presense of multiple chars in string
Go over the string only once.
function old new delta
encode_then_expand_string 126 105 -21
encode_then_expand_vararg 443 399 -44
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/2 up/down: 0/-65) Total: -65 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
Denys Vlasenko [Tue, 17 Jul 2018 12:21:38 +0000 (14:21 +0200)]
hush: improve ${var#...}, ${var:+...} and ${var/.../...} - handle quoting
dollar_altvalue1 test partially fails: word splitting of unquoted ${var:+...}
is not correct
function old new delta
encode_then_expand_vararg - 443 +443
expand_one_var 1599 1610 +11
parse_stream 2756 2753 -3
encode_string 250 242 -8
setup_heredoc 308 298 -10
expand_and_evaluate_arith 106 96 -10
encode_then_expand_string 142 126 -16
------------------------------------------------------------------------------
(add/remove: 1/0 grow/shrink: 1/5 up/down: 454/-47) Total: 407 bytes
Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
projects / oweals / busybox.git / log