Gabor Juhos [Mon, 11 Nov 2013 08:04:46 +0000 (08:04 +0000)]
ar71xx: Add kernel support for the TP-Link WA750RE / WA850RE range extender
Patch to add kernel support for the TP-LINK WA750RE and the WA850RE
range extender
Signed-off-by: Martijn Zilverschoon <thefriedzombie@gmail.com>
[juhosg: rename and refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38717
Gabor Juhos [Mon, 11 Nov 2013 07:47:00 +0000 (07:47 +0000)]
ar71xx: ag71xx: fix ag71xx_probe error path
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38716
Hauke Mehrtens [Mon, 11 Nov 2013 00:15:00 +0000 (00:15 +0000)]
bcm53xx: make bgmac work
This makes bgmac work without sprom and refreshed the patches.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38715
Hauke Mehrtens [Mon, 11 Nov 2013 00:13:31 +0000 (00:13 +0000)]
kernel: bgmac: make it send and receive some packages on BCM4708
This adds some more code for bgmac core rev 4 and it now restarts all
cores when initializing the first one on BCM4708. I am just able to
send under 100 packages and then DMA TX does not work any more.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38714
Hauke Mehrtens [Mon, 11 Nov 2013 00:08:09 +0000 (00:08 +0000)]
kernel: bcma: detect pci ID 0x4313
This pci ID is used by sprom less BCM4313 devices.
This is a backport from the mainline kernel.
This is part of #13551.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38713
Hauke Mehrtens [Sun, 10 Nov 2013 23:29:59 +0000 (23:29 +0000)]
kernel: b53: add initial support for switches in BCM5301X
This is also known as BCM470{7,8,9}.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38712
Felix Fietkau [Sun, 10 Nov 2013 15:06:28 +0000 (15:06 +0000)]
procd: reduce the number of unnecessary calls to /sbin/hotplug-call for tty devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38705
Felix Fietkau [Sun, 10 Nov 2013 10:01:33 +0000 (10:01 +0000)]
netifd: remove connect_time from /var/state, it is unused
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38704
Imre Kaloz [Sun, 10 Nov 2013 09:57:07 +0000 (09:57 +0000)]
add uImage image build
- add building of a standard uImage along with the combined kernel+rootfs
- remove 'old' image build - that was for a very old and obsolete bootloader
To update the bootloader for GW2387,GW2388,GW2391 (NOR Flash) from uboot:
put latest NOR bootloader on tftp server:
http://svn.gateworks.com/laguna/trunk/images/u-boot_nor.bin
Laguna> setenv ipaddr <localip>
Laguna> setenv ipaddr <serverip>
Laguna> tftpboot 0x800000 laguna/u-boot-nor.bin
Laguna> erase 0x10000000 +$(filesize)
Laguna> cp.b 0x800000 0x10000000 $(filesize)
Laguna> reset
To update the bootloader for GW2380,GW2382,GW2383 (SPI Flash) from uboot:
put latest SPI bootloader on tftp server:
http://svn.gateworks.com/laguna/trunk/images/u-boot_spi.bin
Laguna> setenv ipaddr <localip>
Laguna> setenv ipaddr <serverip>
Laguna> tftpboot 0x800000 laguna/u-boot-spi.bin
Laguna> erase 0x60000000 +$(filesize)
Laguna> cp.b 0x800000 0x60000000 $(filesize)
Laguna> reset
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38703
Imre Kaloz [Sun, 10 Nov 2013 09:55:17 +0000 (09:55 +0000)]
add pushbutton GPIO for GW2380/82/83
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
SVN-Revision: 38702
Hauke Mehrtens [Sat, 9 Nov 2013 20:09:21 +0000 (20:09 +0000)]
broadcom-diag: fix sys button on Asus rt-n16
This closes: #14427.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38701
Hauke Mehrtens [Sat, 9 Nov 2013 20:08:09 +0000 (20:08 +0000)]
brcm47xx: add detection for Linksys WRT54GS V1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38700
Hauke Mehrtens [Sat, 9 Nov 2013 19:29:46 +0000 (19:29 +0000)]
brcm47xx: register ADM6996L switch
This patch makes it possible to use adm6996.c on first generation
BCM47XX devices with ADM switches.
This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for
the device.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38699
Hauke Mehrtens [Sat, 9 Nov 2013 19:27:27 +0000 (19:27 +0000)]
kernel: adm6996: add support for ADM6996L and GPIO interface
This patch makes it possible to use adm6996.c on first generation
BCM47XX devices with ADM switches.
The GPIO bit banging protocol implementation was copied from the old
switch driver and adapted to this driver and changed to the mainline
kernel GPIO interface.
The ADM6996L is different from the ADM6996M which is supported, for
both specs are available in the Internet.
This was tested on a WRT54GS version 1.0, thank you Dirk Neukirchen for
the device.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38698
John Crispin [Fri, 8 Nov 2013 21:53:37 +0000 (21:53 +0000)]
procd: update to latest git head
make sure that automatic respawning is turned off during upgrade
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38695
Imre Kaloz [Fri, 8 Nov 2013 12:44:38 +0000 (12:44 +0000)]
switch to 3.12, enable support for AM33xx/OMAP3
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38692
Imre Kaloz [Fri, 8 Nov 2013 12:37:39 +0000 (12:37 +0000)]
rename the omap4 target to omap
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38691
Gabor Juhos [Fri, 8 Nov 2013 12:16:21 +0000 (12:16 +0000)]
base-files: mtd_get_mac_ascii bugfix
The mtd_get_mac_ascii utility function was broken. This fixes it.
- Remove the superfluous include of /lib/functions.sh. The
function is already in that file so it is pointless,
- only use a variable if the whole key word matches,
- don't try to process the MAC address if it is empty,
- use 'tr' to canonicalize the MAC address,
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
[juhosg: add more fixes, update commit message]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38690
Gabor Juhos [Fri, 8 Nov 2013 08:17:54 +0000 (08:17 +0000)]
ar71xx: ag71xx: fix a race involving netdev registration
In particular, phy_connect before register_netdev. This is because
register_netdev runs the netdev notifiers, which can race with the rest of
the initialization in ag71xx_probe. In my case this manifested in two ways:
1) If ag71xx is compiled as a module and inserted after netifd has started,
netifd is notified by register_netdev before the call to
ag71xx_phy_connect. netifd tries to bring the interface up, which calls
ag71xx_open, which in turn enters ag71xx_phy_start. This keys off
ag->phy_dev (which is still NULL) and thinks this is a fixed-link board,
and enters ag71xx_link_adjust. This looks at ag->speed which is not yet
initialized and hits the BUG() in the switch (ag->speed) in
ag71xx_link_adjust.
This is the wrong code path for ag71xx_phy_start - my board has PHYs that
need to be brought up with phy_start. Doing ag71xx_phy_connect before
register_netdev ensures that ag->phy_dev is non-NULL before
ag71xx_phy_start is ever called.
2) When ag71xx is built into the kernel, and netconsole is enabled, there
is a gap in the initial burst of replayed printks right after the netdev
comes up. My assumption is that netconsole is also triggered by a netdev
notifier, and part of this printk burst happens before the call into
ag71xx_phy_connect, so part of the burst is lost while the PHY comes up.
This patch fixes the gap - all the printks before eth0 comes up are bursted
in full when netconsole initializes.
ag71xx_phy_connect_xxx no longer runs with a registered netdev, so the
logging has been adjusted accordingly to avoid "unregistered net_device" or
"eth%d" messages in dmesg.
Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38689
Gabor Juhos [Thu, 7 Nov 2013 22:31:54 +0000 (22:31 +0000)]
ar71xx: build image for the WD My Net Wi-Fi Range Extender
Patchwork: http://patchwork.openwrt.org/patch/4281/
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
[juhosg:
- remove the Image/Build/CyberTANLZMA/loader macro, it is not used
- move the MYNETREXT SingleProfile definition to the correct place]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38688
Gabor Juhos [Thu, 7 Nov 2013 22:31:53 +0000 (22:31 +0000)]
ar71xx: add user-space support for the WD My Net Wi-Fi Range Extender
Patchwork: http://patchwork.openwrt.org/patch/4281/
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38687
Gabor Juhos [Thu, 7 Nov 2013 22:31:52 +0000 (22:31 +0000)]
ar71xx: add kernel support for the My Net Wi-Fi Range Extender device
This patch adds a new device definition for a
Western Digital device. The hardware seems to
be based on Qualcomm Atheros DB120 design.
Patchwork: http://patchwork.openwrt.org/patch/4281/
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
[juhosg: refresh kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38686
Gabor Juhos [Thu, 7 Nov 2013 22:31:48 +0000 (22:31 +0000)]
tools: adapt addpattern for WD's Range Extender
A few things had to be changed to add support for these devices:
- support code patterns with 8 characters
- new board definition for the range extender device
Patchwork: http://patchwork.openwrt.org/patch/4280/
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38685
Felix Fietkau [Thu, 7 Nov 2013 20:59:22 +0000 (20:59 +0000)]
mac80211: mark rt2x00 library packages as hidden, there's no point in allowing users to enable them without the packages that depend on them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38684
Gabor Juhos [Thu, 7 Nov 2013 19:53:02 +0000 (19:53 +0000)]
ar71xx: image: add EOF marker to the WNDR4300 UBI image
Append EOF markers to the END of the UBI image
file. This forces the kernel to erase all blocks
after the marker even if those blocks are not
empty.
Additionally, the resulting image can be flashed
from the original web UI now, so use '-factory'
suffix for that.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38683
Gabor Juhos [Thu, 7 Nov 2013 19:53:01 +0000 (19:53 +0000)]
tools/mtd-utils: add EOF marker support to libubigen/ubinize
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38682
Gabor Juhos [Thu, 7 Nov 2013 19:53:00 +0000 (19:53 +0000)]
kernel/3.10: add EOF marker support to the UBI layer
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38681
Jo-Philipp Wich [Thu, 7 Nov 2013 18:06:29 +0000 (18:06 +0000)]
ubox: fix extroot/extoverlay mounting by label and support mounting by device name
SVN-Revision: 38680
John Crispin [Thu, 7 Nov 2013 15:31:44 +0000 (15:31 +0000)]
ubox: update to latest git head
support for specifying swap priority from the command line
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38679
John Crispin [Thu, 7 Nov 2013 15:31:40 +0000 (15:31 +0000)]
ubus: update to latest git head
adds support for events in the lua binding
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38678
John Crispin [Thu, 7 Nov 2013 12:46:24 +0000 (12:46 +0000)]
lantiq: fix TDW8970 lan/wan mac
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38677
John Crispin [Thu, 7 Nov 2013 12:46:20 +0000 (12:46 +0000)]
button-hotplug: sync list of supported keys with gpio-button-hotplug
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38676
John Crispin [Thu, 7 Nov 2013 12:46:16 +0000 (12:46 +0000)]
au1000: make sysupgrade compatible with all file system types
This patch adds support for all file system types as discussed earlier:
https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022109.html
This patch depends on a previous patch:
https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022111.html
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
SVN-Revision: 38675
John Crispin [Thu, 7 Nov 2013 12:46:12 +0000 (12:46 +0000)]
au1000: create sysupgrade binary for each file system type
This patch should prevent overriding of sysupgrade binaries in the bin directory
if we build images for more then one file system type.
Discussion:
https://lists.openwrt.org/pipermail/openwrt-devel/2013-October/022108.html
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
SVN-Revision: 38674
John Crispin [Thu, 7 Nov 2013 12:46:08 +0000 (12:46 +0000)]
lantiq: Fix ar8216 switch configuration for WBMR-HP-G300H devices
The switch is renamed to "switch0" in newer (3.10) linux kernels.
Configure the switch using vlans by default and only configure
the physical switch ports that are present.
Signed-off-by: Richard Mortimer <richm@oldelvet.org.uk>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38673
John Crispin [Thu, 7 Nov 2013 12:46:04 +0000 (12:46 +0000)]
util-linux: cleanup description for swap-utils
swapon/swapoff are no longer provided by swap-utils, so remove them from
the description as well.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
SVN-Revision: 38672
John Crispin [Thu, 7 Nov 2013 12:46:00 +0000 (12:46 +0000)]
busybox: don't enable swapon/swapoff by default
'swapon/swapoff' are now provided by 'block-mount'; enabling them by default in busybox is no longer required and adds unnecessary bloat.
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38671
John Crispin [Thu, 7 Nov 2013 12:45:57 +0000 (12:45 +0000)]
base-files: Make /etc/init.d/boot restartable
Only reload hostname and timezone config on /etc/init.d/boot restart.
Module loading and basic boot setup is only done during boot.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 38670
John Crispin [Thu, 7 Nov 2013 12:45:52 +0000 (12:45 +0000)]
ralink: revert 38348 as it breaks network on the hame-mpr
https://dev.openwrt.org/changeset/38348
https://dev.openwrt.org/ticket/14403#comment:1
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38669
John Crispin [Thu, 7 Nov 2013 12:45:48 +0000 (12:45 +0000)]
ralink: fix c&p error in gpio driver
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38668
John Crispin [Thu, 7 Nov 2013 12:45:44 +0000 (12:45 +0000)]
lantiq: fix td-w8970 initramfs generation
https://dev.openwrt.org/ticket/14417
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38667
John Crispin [Thu, 7 Nov 2013 12:45:39 +0000 (12:45 +0000)]
lantiq: fix vdsl-app dependency
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38666
Imre Kaloz [Thu, 7 Nov 2013 09:27:52 +0000 (09:27 +0000)]
mark as broken (toolchain issues), bump kernel version
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38665
Luka Perkov [Wed, 6 Nov 2013 19:24:32 +0000 (19:24 +0000)]
kirkwood: add support for dockstar
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38664
Gabor Juhos [Wed, 6 Nov 2013 10:16:40 +0000 (10:16 +0000)]
firmware-utils: remove the wndr3700 utility
It is not used anymore.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38663
Gabor Juhos [Wed, 6 Nov 2013 10:16:39 +0000 (10:16 +0000)]
ar71x: image: don't use the wndr3700 utility
Pass the uImage magic value directly to mkimage instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38662
Luka Perkov [Wed, 6 Nov 2013 08:19:31 +0000 (08:19 +0000)]
sunxi: drop CONFIG_DEVTMPFS option
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38661
Luka Perkov [Wed, 6 Nov 2013 08:19:24 +0000 (08:19 +0000)]
kernel: add some config options
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38660
Gabor Juhos [Tue, 5 Nov 2013 18:41:20 +0000 (18:41 +0000)]
ar71xx: image: fix WNDR4300 initramfs image generation
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38659
Gabor Juhos [Tue, 5 Nov 2013 18:41:18 +0000 (18:41 +0000)]
ar71xx: image: allow to use optional parameters for MkuImageLzma/initramfs
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38658
Imre Kaloz [Tue, 5 Nov 2013 17:46:18 +0000 (17:46 +0000)]
update for 3.12 final
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38657
Hauke Mehrtens [Tue, 5 Nov 2013 17:09:19 +0000 (17:09 +0000)]
brcm47xx: fix detection of Asus RT-N12B1 and Netgear WNR3500L
This closes #14367 and #14328.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38656
Gabor Juhos [Tue, 5 Nov 2013 16:31:14 +0000 (16:31 +0000)]
ar71xx: generate recovery image for WNDR4300
Extended the Makefile to generate a working factory reset image
for Netgear WNDR4300. The image uses UBI with two volumes squashfs
(rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot
happy, a fake rootfs image is placed into the last erase block
of the kernel partition.
Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
- restore the NetgearNAND/initramfs macro,
- remove unused {Squash,Ubi}fsTemplate macros,
- remove board specific mtd options from CONFIG_CMDLINE, append the
board specific ubi.mtd parameter to the kernel command line instead,
- increase kernel partition size to 2MiB,
- use board specific ini file for ubinize,
- put jffs2 eof mark into the rootfs_data ubi volume,
- use KDIR_TMP for temporary images,
- use the squashfs-raw image,
- increase kernel partition size to 2MiB,
- use a local ubinize macro,
- fix macro parameter comments,
- put the fake rootfs into the last erase block of the kernel
partition,
- move Image/Build/NetgearNAND/buildkernel macro before
define Image/Build/NetgearNAND,
- don't use the wndr3700 utility, use '-M' parameter of mkimage to set
the uImage magic,
- use '-recovery' suffix for the generated image, it is only usable via
the fw_recovery function of the bootloader,
- update commit log]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38655
Gabor Juhos [Tue, 5 Nov 2013 16:31:12 +0000 (16:31 +0000)]
package/ubox: fix jffs2 handling on MTD devices emulated by gluebi
The jffs2_ready() function in mount_root.c checks
the presence of various JFFS2 markers at the start
of a given MTD device. The function works on NOR
flashes because JFFS2 puts 'cleanmarker' nodes at
the start of freshly erased blocks.
However if jffs2 is used on a MTD device emulated
by the gluebi layer, the 'cleanmarker' nodes are
not present and the jffs2_ready() function fails.
Update the code to handle jffs2 correctly even on
MTD devices emulated by the gluebi layer.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38654
Gabor Juhos [Tue, 5 Nov 2013 08:25:45 +0000 (08:25 +0000)]
kernel: update 3.10 to 3.10.18
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38652
Luka Perkov [Tue, 5 Nov 2013 08:00:34 +0000 (08:00 +0000)]
sunxi: add new target
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38651
Luka Perkov [Tue, 5 Nov 2013 08:00:30 +0000 (08:00 +0000)]
imx6: drop unused variable from Makefile
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38650
Luka Perkov [Tue, 5 Nov 2013 08:00:24 +0000 (08:00 +0000)]
include: add more CPU flags for arm
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38649
Jo-Philipp Wich [Mon, 4 Nov 2013 22:40:56 +0000 (22:40 +0000)]
dnsmasq: fix backward compatibility with existing configs
Changeset r36943 ("dnsmasq: use host-record instead of address") removed
the automatic domain expansion for config domain sections, this breaks
existing setups and alters the old behaviour in unexpected ways, therfore
restore behaviour of the current stable release.
Additionally handle fully qualified hostnames properly when setting up the
own hostrecord by stripping the local domain part form the given name
instead of unconditionally appending it, so that "example.lan" results
in "example example.lan" and not "example.lan example.lan.lan".
SVN-Revision: 38648
Gabor Juhos [Mon, 4 Nov 2013 18:37:09 +0000 (18:37 +0000)]
ar71xx: move WNDR4300 profile to the nand subtarget
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38647
Gabor Juhos [Mon, 4 Nov 2013 18:37:08 +0000 (18:37 +0000)]
ar71xx: Add new subtarget nand for WNDR4300
Add new subtarget nand with UBI/UBIFS including GLUEBI and squashfs.
This target will be used for NAND based router which make use of
UBI (and maybe UBIFS later on) in order to provide proper NAND
support.
Signed-off-by: Stefan Agner <stefan@agner.ch>
[juhosg:
- tweak target.mk:
change BOARDNAME variable,
improve Target/Description,
remove targz and ubifs from FEATURES and add broken flag,
- optimize kernel configuration:
disable ubifs, it is not used yet,
disable unused MTD options,
disable SPI support
disable unused network drivers,
tune kernel command line,
- remove image/ubinize.cfg, it will be in a follow-up patch
- move profile modifications into a separate patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38646
Gabor Juhos [Mon, 4 Nov 2013 18:37:07 +0000 (18:37 +0000)]
ar71xx: remove yaffs from the generic rootfstype list
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38645
Gabor Juhos [Mon, 4 Nov 2013 18:37:06 +0000 (18:37 +0000)]
ar71xx: image: dd root.* images in fs specific macros
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38644
Gabor Juhos [Mon, 4 Nov 2013 18:37:05 +0000 (18:37 +0000)]
kernel/3.1[02]: move MTD root device setup code to mtdcore
The current code only allows to automatically set
root device on MTD partitions. Move the code to MTD
core to allow to use it with all MTD devices.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38643
Gabor Juhos [Mon, 4 Nov 2013 18:37:03 +0000 (18:37 +0000)]
kernel: refresh kernel configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38642
Hauke Mehrtens [Sun, 3 Nov 2013 20:20:14 +0000 (20:20 +0000)]
kernel: add some config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38640
Hauke Mehrtens [Sun, 3 Nov 2013 20:18:45 +0000 (20:18 +0000)]
kernel: fix dependencies of kmod-thermal
This depends on kmod-hwmon-core
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38639
Hauke Mehrtens [Sun, 3 Nov 2013 20:17:52 +0000 (20:17 +0000)]
kernel: fix dependencies of usb-eth-gadget
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38638
Hauke Mehrtens [Sun, 3 Nov 2013 19:24:39 +0000 (19:24 +0000)]
kernel: bgmac: update backport patch
This adds some more bgmac patches from mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38637
Gabor Juhos [Fri, 1 Nov 2013 18:33:24 +0000 (18:33 +0000)]
ar71xx: image: only define profiles for the generic subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38636
Gabor Juhos [Fri, 1 Nov 2013 18:33:22 +0000 (18:33 +0000)]
ar71xx: image: add IMAGE_PROFILE variable
Ensures that the 'Default' images are generated
even if the subtarget has no profiles.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38635
Gabor Juhos [Fri, 1 Nov 2013 18:33:18 +0000 (18:33 +0000)]
ar71xx: always enable hw ecc support for the ar934x-nfc module
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38634
Hauke Mehrtens [Fri, 1 Nov 2013 08:49:35 +0000 (08:49 +0000)]
kernel: add missing config options
The buildbots found some new missing config options.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38633
Felix Fietkau [Thu, 31 Oct 2013 17:36:24 +0000 (17:36 +0000)]
openvpn: clean up and fix the init script
- clean up duplication of procd instance handling code
- using --cd *after* --config is rather pointless
- to be able to log errors properly, --syslog needs to be passed before --config
- tell procd about the generated or referenced config file instead of
the uci file. this avoids having to restart all instances if only one
of them changes.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38632
Luka Perkov [Thu, 31 Oct 2013 12:04:04 +0000 (12:04 +0000)]
kirkwood: add userland support for Pogoplug E02
This patch adds the userland support for the Pogoplug E02 by Cloud
Engines, Inc.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38631
Luka Perkov [Thu, 31 Oct 2013 12:04:02 +0000 (12:04 +0000)]
kirkwood: add Pogoplug E02 Kernel support
This patch adds a DTS file for the Pogoplug E02 by Cloud Engines, Inc.
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38630
Luka Perkov [Thu, 31 Oct 2013 11:44:28 +0000 (11:44 +0000)]
kirkwood: extend image/Makefile
* use lower case letters in generated images
* extend support for boot/ directory
* fix some typos
Signed-off-by: Luka Perkov <luka@openwrt.org>
Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
SVN-Revision: 38629
Luka Perkov [Thu, 31 Oct 2013 11:44:27 +0000 (11:44 +0000)]
imx6: minor image cleanup
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38628
Felix Fietkau [Thu, 31 Oct 2013 11:22:01 +0000 (11:22 +0000)]
netifd: update to the latest version, fixes regression in proto-shell scripts (#14400, #14402)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38627
Imre Kaloz [Thu, 31 Oct 2013 10:57:46 +0000 (10:57 +0000)]
use a single package to build MLO/u-boot for all omap boards
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 38626
Luka Perkov [Thu, 31 Oct 2013 00:00:51 +0000 (00:00 +0000)]
uboot-imx6: update to 2013.10
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38625
Luka Perkov [Wed, 30 Oct 2013 23:31:26 +0000 (23:31 +0000)]
imx6: update patches
Changes include PCI fixes and various upstream pending patches.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 38624
Jo-Philipp Wich [Wed, 30 Oct 2013 15:16:59 +0000 (15:16 +0000)]
cyassl: drop obsolete patches
SVN-Revision: 38610
Jo-Philipp Wich [Wed, 30 Oct 2013 13:19:48 +0000 (13:19 +0000)]
cyassl: upgrade to v2.8.0
Un-reverts the previous update commit and forward-ports the patch
to improve legacy SSLv2 handshake handling.
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 38609
Felix Fietkau [Wed, 30 Oct 2013 12:56:47 +0000 (12:56 +0000)]
ustream-ssl: update to the latest version, adds support for the current cyassl version (#14386)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38608
Felix Fietkau [Wed, 30 Oct 2013 11:25:05 +0000 (11:25 +0000)]
libubox: update to latest version, makes jshn roughly twice as fast
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38607
Felix Fietkau [Wed, 30 Oct 2013 11:25:01 +0000 (11:25 +0000)]
netifd: update to latest version, adds fixes and some preparation for supporting wifi devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 38606
Hauke Mehrtens [Wed, 30 Oct 2013 09:50:13 +0000 (09:50 +0000)]
kernel: add missing dependency for kernel 3.12 in tg3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38605
Hauke Mehrtens [Wed, 30 Oct 2013 09:48:19 +0000 (09:48 +0000)]
kernel: add some missing config options
This was spotted by the buildbots.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 38604
Gabor Juhos [Wed, 30 Oct 2013 07:06:24 +0000 (07:06 +0000)]
ramips: enable building of TEW-692GR images
The TEW-692GR images are missing since r36169. Uncomment
the board specific macro in image/Makefile, in order to
generate those again.
Only build tested. No idea if the the image works or not,
I have bricked my TEW-692GR a few months ago.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38603
Gabor Juhos [Wed, 30 Oct 2013 07:06:23 +0000 (07:06 +0000)]
ramips: fix number of GPIOs for RT3352
The RT3352 SoC only supports 46 GPIO lines.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38602
Gabor Juhos [Wed, 30 Oct 2013 07:06:22 +0000 (07:06 +0000)]
ramips: remove trailing whitespaces from .dts{,i} files
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38601
Gabor Juhos [Wed, 30 Oct 2013 06:54:59 +0000 (06:54 +0000)]
ar71xx: move subtarget specific features to target.mk
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38600
Gabor Juhos [Wed, 30 Oct 2013 06:54:56 +0000 (06:54 +0000)]
uboot-ar71xx: make it depend on the generic ar71xx subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38599
Gabor Juhos [Wed, 30 Oct 2013 06:54:55 +0000 (06:54 +0000)]
ar71xx: don't build uImages for the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38598
Gabor Juhos [Wed, 30 Oct 2013 06:54:54 +0000 (06:54 +0000)]
ar71xx: disable non Mikrotik boards in the mikrotik subtarget
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38597
Gabor Juhos [Wed, 30 Oct 2013 06:54:53 +0000 (06:54 +0000)]
ar71xx: fix Kconfig symbol selection for RB95x/RB2011
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38596
Gabor Juhos [Wed, 30 Oct 2013 06:51:02 +0000 (06:51 +0000)]
ar71xx: move CONFIG_MTD_NAND_AR934X_HW_ECC option to subtarget config
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38595
Gabor Juhos [Wed, 30 Oct 2013 06:51:01 +0000 (06:51 +0000)]
generic: mtdsplit_uimage: add uImage magic for the WRN2200 board
Should fix boot failure on the WNR2200 boards.
Compile tested only.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38594
Gabor Juhos [Wed, 30 Oct 2013 06:50:59 +0000 (06:50 +0000)]
ar71xx: add profile and build image for the BXU2000n-2 A1 board
Patchwork: http://patchwork.openwrt.org/patch/4183/
Signed-off-by: Terry Yang <yangbo@bhunetworks.com>
[juhosg:
- remove MultiProfile, it makes no sense for a single board
- move SingleProfile call and the mtdlayout to a different
location keep things sorted (well, almost)]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 38593
projects / librecmc / librecmc.git / log