Jens Gehrlein [Tue, 29 Jan 2008 07:45:03 +0000 (08:45 +0100)]
TQM834x: enable DHCP
Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jens Gehrlein [Tue, 29 Jan 2008 07:45:02 +0000 (08:45 +0100)]
TQM834x: support for Spansion N-type Flashes (sector size = 256 KiB at 2x16 Bit).
Signed-off-by: Jens Gehrlein <sew_s@tqs.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Ben Warren [Sun, 27 Jan 2008 04:41:19 +0000 (23:41 -0500)]
Fix conditional compilation of mpx8xxx_spi driver
This driver should only compile if CONFIG_MPC8XXX_SPI is set
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Wolfgang Denk [Fri, 25 Jan 2008 08:56:17 +0000 (09:56 +0100)]
inka4x0: remove dead code
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 23 Jan 2008 13:41:37 +0000 (14:41 +0100)]
Coding Style Cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 23 Jan 2008 13:40:34 +0000 (14:40 +0100)]
Merge ../custodians
Wolfgang Denk [Wed, 23 Jan 2008 13:39:26 +0000 (14:39 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ixp
Wolfgang Denk [Wed, 23 Jan 2008 13:37:59 +0000 (14:37 +0100)]
Merge ../custodians
Wolfgang Denk [Wed, 23 Jan 2008 13:37:52 +0000 (14:37 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mips
Wolfgang Denk [Wed, 23 Jan 2008 13:35:32 +0000 (14:35 +0100)]
Merge ../custodians
Wolfgang Denk [Wed, 23 Jan 2008 13:35:26 +0000 (14:35 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-sh
Wolfgang Denk [Wed, 23 Jan 2008 13:34:00 +0000 (14:34 +0100)]
Merge ../custodians
Wolfgang Denk [Wed, 23 Jan 2008 13:33:40 +0000 (14:33 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-avr32
Wolfgang Denk [Wed, 23 Jan 2008 13:31:17 +0000 (14:31 +0100)]
Coding Style Cleanup; update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 23 Jan 2008 13:23:13 +0000 (14:23 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-coldfire
Wolfgang Denk [Wed, 23 Jan 2008 13:20:49 +0000 (14:20 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-net
Wolfgang Denk [Wed, 23 Jan 2008 13:19:45 +0000 (14:19 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-ppc4xx
Wolfgang Denk [Wed, 23 Jan 2008 13:18:18 +0000 (14:18 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc86xx
Wolfgang Denk [Wed, 23 Jan 2008 12:56:55 +0000 (13:56 +0100)]
Merge branch 'master' of git://denx.de/git/u-boot-mpc85xx
Dave Liu [Fri, 18 Jan 2008 02:07:04 +0000 (10:07 +0800)]
mpc83xx: Correct the struct spi8xxx in mpc8xxx_spi.h
The commit
04a9e1180ac76a7bacc15a6fcd95ad839d65bddb
cause the 83xx immap broken, so the DMA and PCI will
be failed.
The patch fix the struct spi8xxx and rm struct spi83xx.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Shinya Kuribayashi [Fri, 18 Jan 2008 13:48:06 +0000 (22:48 +0900)]
Merge branch 'master' of git://denx.de/git/u-boot
Haavard Skinnemoen [Sat, 14 Apr 2007 15:11:49 +0000 (17:11 +0200)]
AVR32: ATNGW100 board support
Add support for the ATNGW100 Network Gateway reference design,
including flash, ethernet and MMC support.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Haavard Skinnemoen [Sat, 24 Nov 2007 17:15:31 +0000 (18:15 +0100)]
AVR32: Initialize ipaddr, loadaddr and bootfile at startup
I don't know why the relevant layers can't do this by itself, but this
is what ppc does.
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Michael Schwingen [Thu, 17 Jan 2008 23:04:28 +0000 (00:04 +0100)]
Add AcTux board support
Hi,
The patch adds 4 boards, called AcTux-1 .. AcTux-4. This patch contains the
files that
contain changes for multiple boards, the board-specific files follow as
separate patches.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Wed, 16 Jan 2008 18:53:23 +0000 (19:53 +0100)]
add AcTux-4 board support
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Wed, 16 Jan 2008 18:51:55 +0000 (19:51 +0100)]
add AcTux-3 board support
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Wed, 16 Jan 2008 18:51:14 +0000 (19:51 +0100)]
add AcTux-2 board support
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Michael Schwingen [Wed, 16 Jan 2008 18:50:37 +0000 (19:50 +0100)]
add AcTux-1 board support
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 14 Jan 2008 18:20:08 +0000 (19:20 +0100)]
ARM: remove useless function board_post_init
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Michael Schwingen [Thu, 10 Jan 2008 13:59:46 +0000 (14:59 +0100)]
IXP: enable RTS
enables the RTS signal with CONFIG_SERIAL_RTS_ACTIVE.
No handshaking is done, but the active RTS signal allows to
connect to the target using a PC which is using RTS/CTS
handshake, and does no harm if the PC is set to ignore RTS.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Jean-Christophe PLAGNIOL-VILLARD [Mon, 7 Jan 2008 07:41:34 +0000 (08:41 +0100)]
IXP: add dynamic microcode addr
allow to load the microde from flash or ram by download it through
the serial or other.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Stefan Roese <sr@denx.de>
Michael Schwingen [Sat, 10 Nov 2007 14:44:12 +0000 (15:44 +0100)]
load ixp42x NPE firmware from separate flash block, remove dead code
Hi,
the following patch adds support to move the IXP42X NPE firmware to a
separate flash block, whose start address is defined in
CONFIG_IXP4XX_NPE_EXT_UCODE_BASE. Using that, it is possible to build
NPE-enabled u-boot without copyright problems due to the NPE firmware.
I hope the patch applies, I get whitespace-related differences in the NPE
files due to trailing whitespace in the original versions.
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Andy Fleming [Thu, 17 Jan 2008 21:52:38 +0000 (15:52 -0600)]
Merge branch 'kumar'
TsiChungLiew [Tue, 15 Jan 2008 20:15:46 +0000 (14:15 -0600)]
ColdFire: MCF547x_8x - Add M5475EVB and M5485EVB support
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Tue, 15 Jan 2008 20:02:49 +0000 (14:02 -0600)]
ColdFire: MCF547x_8x - Add M547xEVB and M548xEVB board
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Tue, 15 Jan 2008 20:00:25 +0000 (14:00 -0600)]
ColdFire: Add MCF547x_8x FEC driver
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Tue, 15 Jan 2008 19:54:09 +0000 (13:54 -0600)]
ColdFire: Add MCF547x_8x dma code and header files
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Tue, 15 Jan 2008 19:52:03 +0000 (13:52 -0600)]
ColdFire: Add MCF547x_8x dma code - 2
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Tue, 15 Jan 2008 19:48:52 +0000 (13:48 -0600)]
ColdFire: Add MCF547x_8x dma code - 1
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Tue, 15 Jan 2008 19:39:44 +0000 (13:39 -0600)]
ColdFire: Add MCF547x_8x related header files
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Tue, 15 Jan 2008 19:37:34 +0000 (13:37 -0600)]
ColdFire: Add MCF547x_8x cpu arch
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:47:23 +0000 (17:47 -0600)]
ColdFire: Add MCF5227x cpu and M52277EVB support-3
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:46:19 +0000 (17:46 -0600)]
ColdFire: Add MCF5227x cpu and MCF52277EVB support-2
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:43:33 +0000 (17:43 -0600)]
ColdFire: Add MCF5227x cpu and M52277EVB support-1
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:35:44 +0000 (17:35 -0600)]
ColdFire: Fix CFI Flash low level Read/Write macro
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:23:08 +0000 (17:23 -0600)]
ColdFire: Add M5373EVB platform support - 2
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:19:54 +0000 (17:19 -0600)]
ColdFire: Add M5373EVB platform support - 1
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:17:03 +0000 (17:17 -0600)]
ColdFire: Update FlexBus CS for MCF532x
Definition update and change from 16bit to 32bit
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:11:47 +0000 (17:11 -0600)]
ColdFire: PCI and misc updates for MCF5445x
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 23:06:55 +0000 (17:06 -0600)]
ColdFire: MCF5445x header files cleanup
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 22:59:42 +0000 (16:59 -0600)]
ColdFire: MCF532x header files cleanup
Signed-off-by: TsiChungLiew <Tsi-Chung.Liew@freescale.com>
Signed-off by: John Rigby <jrigby@freescale.com>
TsiChungLiew [Mon, 14 Jan 2008 21:30:15 +0000 (15:30 -0600)]
ColdFire: Add modules header files
Add CF specific modules header files
Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>
Signed-off-by: John Rigby <jrigby@freescale.com>
Kim Phillips [Thu, 17 Jan 2008 18:48:00 +0000 (12:48 -0600)]
codingstyle cleanup for spi driver
..and rm unused CONFIG_FSL_SPI define
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Haiying Wang [Wed, 16 Jan 2008 22:12:12 +0000 (17:12 -0500)]
FSL: Fix common EEPROM_data structure definition
- Fix EEPROM_data structure definition according to System EEPROM Data Format.
- Read MAC addresses from EEPROM to ethXaddr before saving ethXaddr to
bd->bi_ethaddr.
Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com>
Timur Tabi [Wed, 16 Jan 2008 21:48:12 +0000 (15:48 -0600)]
86xx: enable command-line editing
Enable command-line editing for all MPC86xx boards.
Signed-off-by: Timur Tabi <timur@freescale.com>
Ben Warren [Thu, 17 Jan 2008 03:37:42 +0000 (22:37 -0500)]
Implement hard SPI driver on MPC8349EMDS
This patch implements the fsl_spi driver on the MPC8349EMDS evaluation board.
This board has an ST M25P40 4Mbit EEPROM on its SPI bus
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Ben Warren [Thu, 17 Jan 2008 03:37:35 +0000 (22:37 -0500)]
Add support for a Freescale non-CPM SPI controller
This patch adds support for the SPI controller found on Freescale PowerPC
processors such as the MCP834x family. Additionally, a new config option,
CONFIG_HARD_SPI, is added for general purpose SPI controller use.
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Thu, 17 Jan 2008 10:23:19 +0000 (18:23 +0800)]
mpc83xx: Fix the fatal conflict of merge
The commit
9e89647889cd4b5ada5b5e7cad6cbe55737a08d7
will cause the mpc8315erdb board can't boot up.
The patch fix that bug, and remove the duplicated #ifdef
CFG_SPCR_TSECEP code and clean the SCCR_TSEC2 for
MPC8313E processor.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Stefan Roese [Thu, 17 Jan 2008 15:04:12 +0000 (16:04 +0100)]
Merge branch 'master' of /home/stefan/git/u-boot/u-boot
Larry Johnson [Thu, 17 Jan 2008 13:50:09 +0000 (08:50 -0500)]
Merge Sequoia beautification into Korat code
Signed-off-by: Larry Johnson <lrj@acm.org>
Matthias Fuchs [Thu, 17 Jan 2008 06:45:05 +0000 (07:45 +0100)]
net: add 'ethrotate' environment variable
[PATCH] net: add 'ethrotate' environment variable
This patch replaces the buildtime configuration option
CONFIG_NET_DO_NOT_TRY_ANOTHER through the 'ethrotate' runtime
configuration veriable. See README.
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
Stefan Roese [Thu, 17 Jan 2008 13:29:04 +0000 (14:29 +0100)]
ppc4xx: Fix compilation warnings and coding style issues in HCU4/HCU5
Signed-off-by: Stefan Roese <sr@denx.de>
Nobuhiro Iwamatsu [Thu, 17 Jan 2008 09:07:32 +0000 (18:07 +0900)]
sh: Remove CONFIG_COMMANDS from MS7720SE config file
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Niklaus Giger [Wed, 16 Jan 2008 17:39:20 +0000 (18:39 +0100)]
ppc4xx: Netstal HCU4 board: added various fixes and POST
- Moved some common code to netstal/common/nm_bsp.c.
- sdram initialisation goes go netstal/common/fixed_sdram.c.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Thu, 17 Jan 2008 11:53:56 +0000 (12:53 +0100)]
ppc4xx: netstal/common define routines used by all boards
Added some routines used by all Netstal boards:
- nm_bsp.c: - nm_show_print and
- common_misc_init_r
- set_params_for_sw_install. Very specific code to handle our SW
installation procedure
- fixed_sdram.c: Common routines for HCU4 (and upcoming) MCU25 boards
to handle sdram initialization.
- nm.h: Common header
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Wed, 16 Jan 2008 17:39:18 +0000 (18:39 +0100)]
ppc4xx: Netstal HCU5 board: added various fixes and POST
- Moved some common code to nestal/common/nm_bsp.c.
- Added support for the vxWorks EDR.
- Enable trace for Lauterbach, if present.
- Added support for POST.
- Stylistic cleanups (multi-line comments/ enforce 80 colomn width)
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Wed, 16 Jan 2008 17:39:08 +0000 (18:39 +0100)]
ppc4xx: Netstal HCU5 board. Added POST. Various fixes
- Various fixes
- Reduced rom_size from 384 to 320 kB
- Environment is now in flash
- Added POST
- Support for OF
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Niklaus Giger [Wed, 16 Jan 2008 17:37:50 +0000 (18:37 +0100)]
ppc4xx: Netstal HCU4 board. Added POST. Various fixes
- Various fixes
- Reduced rom_size from 384 to 320 kB
- Environment is now in flash
- Added POST
- Support for OF
Signed-off-by: Niklaus Giger <niklaus.giger@netstal.com>
Matthias Fuchs [Thu, 17 Jan 2008 09:53:08 +0000 (10:53 +0100)]
ppc4xx: Complete DU440 board support
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Matthias Fuchs [Thu, 17 Jan 2008 09:52:30 +0000 (10:52 +0100)]
ppc4xx: Add DU440 board support
Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Wolfgang Denk [Thu, 17 Jan 2008 08:35:26 +0000 (09:35 +0100)]
Merge branch 'master' of git+ssh://10.10.0.7/home/wd/git/u-boot/master
Nobuhiro Iwamatsu [Thu, 17 Jan 2008 06:53:52 +0000 (15:53 +0900)]
sh: Update SuperH SCIF driver
This patch fixed wrong SH7720 CPU macro and changed macro that
calculated value of SCBRR register.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Grzegorz Bernacki [Wed, 16 Jan 2008 14:12:47 +0000 (15:12 +0100)]
Set ips dividor to 1/4 of csb clock.
Previous setting cause ips clock to be out of spec. This bug was found by John
Rigby from Freescale.
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Kumar Gala [Thu, 17 Jan 2008 08:19:18 +0000 (02:19 -0600)]
85xx: Get ride of old TLB setup code
Now that all boards have been converted, remove old config code and the
config option for the new style.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 08:02:10 +0000 (02:02 -0600)]
85xx: Convert TQM85xx to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 07:56:32 +0000 (01:56 -0600)]
85xx: Convert STXGP3 & STXSSA to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 07:44:34 +0000 (01:44 -0600)]
85xx: Convert SBC8540/SBC8560/SBC8548 to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 07:31:34 +0000 (01:31 -0600)]
85xx: Convert PM854/PM856 to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 07:25:33 +0000 (01:25 -0600)]
85xx: Convert MPC8540EVAL to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 07:12:22 +0000 (01:12 -0600)]
85xx: Convert MPC8568 MDS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 07:01:09 +0000 (01:01 -0600)]
85xx: Convert MPC8541/MPC8555/MPC8548 CDS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 06:52:29 +0000 (00:52 -0600)]
85xx: Convert MPC8540/MPC8560 ADS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 06:32:17 +0000 (00:32 -0600)]
85xx: Convert ATUM8548 to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 05:11:57 +0000 (23:11 -0600)]
85xx: Convert MPC8544 DS to new TLB setup
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 04:38:34 +0000 (22:38 -0600)]
85xx: Reworked initial processor init
Reworked the initial processor initialzation sequence:
* introduced cpu_early_init_f that is run in address space 1 (AS=1)
* Moved TLB/LAW and CCSR init into cpu_early_init_f()
* Reworked initial asm code to do most of the core init before TLBs
The main reasons for these changes are to allow handling of 36-bit phys
addresses in the future and some of the issues that will exist when we
do that.
There are a few caveats on what can be initialized via the LAW and TLB
static tables:
* TLB entry 14/15 can't be initialized via the TLB table
* any LAW that covers the implicit boot window (4G-8M to 4G) must map to
the code that is currently executing.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 17 Jan 2008 04:33:22 +0000 (22:33 -0600)]
85xx: Introduce new tlb API
Add a set of functions to manipulate TLB entries:
* set_tlb() - write a tlb entry
* invalidate_tlb() - invalidate a tlb array
* disable_tlb() - disable a variable size tlb entry
* init_tlbs() - setup initial tlbs based on static table
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Stefan Roese [Thu, 17 Jan 2008 06:50:17 +0000 (07:50 +0100)]
ppc4xx: Fix remaining CONFIG_COMMANDS in 4xx files
Signed-off-by: Stefan Roese <sr@denx.de>
Kumar Gala [Wed, 16 Jan 2008 16:04:42 +0000 (10:04 -0600)]
85xx: Use proper defines for PCI addresses
We should be using the _MEM_PHYS for LAW and TLB setup and not _MEM_BASE.
While _MEM_BASE & _MEM_PHYS are normally the same, _MEM_BASE should only
be used for configuring the PCI ATMU.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:22:29 +0000 (09:22 -0600)]
85xx: Remove old style of LAW init
All boards are now using the new fsl_law code so we can drop the old version.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:15:29 +0000 (09:15 -0600)]
85xx: convert remaining 85xx boards over to use new LAW init code
Converted ATUM8548, MPC8568 MDS, MPC8540 EVAL, and TQM85xx boards over
to use new LAW init code.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:11:53 +0000 (09:11 -0600)]
85xx: convert STXGP3/STXSSA over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:06:48 +0000 (09:06 -0600)]
85xx: convert PM854/PM856 over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 15:05:27 +0000 (09:05 -0600)]
85xx: convert SBC8540/SBC8560/SBC8548 over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:45:10 +0000 (01:45 -0600)]
85xx: convert MPC8541/MPC8555/MPC8548 CDS over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:32:06 +0000 (01:32 -0600)]
85xx: convert MPC8540/MPC8560 ADS over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:16:16 +0000 (01:16 -0600)]
85xx: convert MPC8544 DS over to use new LAW init code
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Wed, 16 Jan 2008 07:13:58 +0000 (01:13 -0600)]
85xx: Move LAW init code into C
Move the initialization of the LAWs into C code and provide an API
to allow modification of LAWs after init.
Board code is responsible to provide a law_table and num_law_entries.
We should be able to use the same code on 86xx as well.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Jean-Christophe PLAGNIOL-VILLARD [Sat, 22 Dec 2007 14:03:12 +0000 (15:03 +0100)]
qemu-mips: active HUSH PARSER, AUTO_COMPLETE and CMDLINE_EDITING
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Vlad Lungu [Wed, 16 Jan 2008 17:27:51 +0000 (19:27 +0200)]
MIPS:Target support for qemu -M mips
With serial, NE2000, IDE support. Tested in big-endian mode.
Memory size hard-coded to 128M for now, so don't play with
the -m option.
Signed-off-by: Vlad Lungu <vlad@comsys.ro>
Jean-Christophe PLAGNIOL-VILLARD [Thu, 10 Jan 2008 23:01:37 +0000 (00:01 +0100)]
Fix nfs command help to reflect that the serverip is optional
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
projects / oweals / u-boot.git / log