Fix infinite loops in secure memory allocation.

Issue 1:

sh.bittable_size is a size_t but i is and int, which can result in
freelist == -1 if sh.bittable_size exceeds an int.

This seems to result in an OPENSSL_assert due to invalid allocation
size, so maybe that is "ok."

Worse, if sh.bittable_size is exactly 1<<31, then this becomes an
infinite loop (because 1<<31 is a negative int, so it can be shifted
right forever and sticks at -1).

Issue 2:

CRYPTO_secure_malloc_init() sets secure_mem_initialized=1 even when
sh_init() returns 0.

If sh_init() fails, we end up with secure_mem_initialized=1 but
sh.minsize=0. If you then call secure_malloc(), which then calls,
sh_malloc(), this then enters an infite loop since 0 << anything will
never be larger than size.

Issue 3:

That same sh_malloc loop will loop forever for a size greater
than size_t/2 because i will proceed (assuming sh.minsize=16):
i=16, 32, 64, ..., size_t/8, size_t/4, size_t/2, 0, 0, 0, 0, ....
This sequence will never be larger than "size".

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3449)

Clean away needless VMS check

BIO_socket_ioctl is only implemented on VMS for VMS version 7.0 and
up, but since we only support version 7.1 and up, there's no need to
check the VMS version.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3448)

Cleanup - use e_os2.h rather than stdint.h

Not exactly everywhere, but in those source files where stdint.h is
included conditionally, or where it will be eventually

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3447)

testutil: Fix non-standard subtest output

In some cases, testutil outputs subtests like this:

    1..6 # Subtest: progname

The standard set by Test::More (because there really is no actual
standard yet) gives this display:

    # Subtest: progname
    1..6

Until the standard is actually agreed upon, let's do it like
Test::More.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3446)

evp_test: use the test file name as the test title

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3445)

testutil: add the possibility to set the current test title

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3445)

Fix gcc-7 warnings.
- Mostly missing fall thru comments
- And uninitialized value used in sslapitest.c

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3440)

Unclash clashing reason codes in ssl.h

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3441)

Use compare_mem wrapper

Add file/line# to test error message.
Also remove expected/got fields since TEST structure prints them.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)

Address some feedback

Report test detail error.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)

Convert of evp_test to framework

Also, allow multiple files on commandline (for future splitup of
evptests.txt)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3324)

Fix regression in openssl req -x509 behaviour.

Allow conversion of existing requests to certificates again.
Fixes the issue #3396

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3437)

Remove dead code.

The second BN_is_zero test can never be true.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3434)

Add some extra comments following alert changes

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Add some checks for trailing data after extension blocks

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Send a missing_extension alert if key_share/supported groups not present

Only applies if we're not doing psk.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

TLSv1.3 alert and handshake messages can never be 0 length

We abort if we read a message like this.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

TLSv1.3 alerts cannot be fragmented and only one per record

We should be validating that.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Check that a TLSv1.3 encrypted message has an app data content type

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Send an illegal parameter alert if the update type in a KeyUpdate is wrong

Previously we sent a decode_error alert.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Ensure we fail with a decode error alert if the server sends and empty Cert

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Fix more alert codes

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Verify that there is no trailing data after the extensions block

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Fix some alert codes

Make sure we are using the correct alert codes as per the spec.

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

Reject unknown warning alerts in TLSv1.3

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3436)

make update

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3409)

Add EVP_DigestSign and EVP_DigesVerify

Add "single part" digest sign and verify functions. These sign and verify
a message in one function. This simplifies some operations and it will later
be used as the API for algorithms which do not support the update/final
mechanism (e.g. PureEdDSA).

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3409)

Clarify that a test failed

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3423)

Add a descriptive header to diff output from failed tests.

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3433)

Ignore MSVC warnings (via Gisle Vanem)

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3420)

Add a test for SNI in conjunction with custom extensions

Test that custom extensions still work even after a change in SSL_CTX due
to SNI. See #2180.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3425)

Copy custom extension flags in a call to SSL_set_SSL_CTX()

The function SSL_set_SSL_CTX() can be used to swap the SSL_CTX used for
a connection as part of an SNI callback. One result of this is that the
s->cert structure is replaced. However this structure contains information
about any custom extensions that have been loaded. In particular flags are
set indicating whether a particular extension has been received in the
ClientHello. By replacing the s->cert structure we lose the custom
extension flag values, and it appears as if a client has not sent those
extensions.

SSL_set_SSL_CTX() should copy any flags for custom extensions that appear
in both the old and the new cert structure.

Fixes #2180

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3425)

Fix 'no-ec'

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3430)

Prefer TAP::Harness over Test::Harness

TAP:Harness came along in perl 5.10.1, and since we claim to support
perl 5.10.0 in configuration and testing, we can only load it
conditionally.

The main reason to use TAP::Harness rather than Test::Harness is its
capability to merge stdout and stderr output from the test recipes,
which Test::Harness can't.  The merge gives much more comprehensible
output when testing verbosely.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3424)

Add test_test tests for bignums.
Add relative tests for bignums.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3405)

Add BN support to the test infrastructure.

This includes support for:

- comparisions between pairs of BIGNUMs
- comparisions between BIGNUMs and zero
- equality comparison between BIGNUMs and one
- equality comparisons between BIGNUMs and constants
- parity checks for BIGNUMs

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3405)

Add test for no change following an HRR

Verify that we fail if we receive an HRR but no change will result in
ClientHello2.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)

Verify that if we have an HRR then something will change

It is invalid if we receive an HRR but no change will result in
ClientHello2.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)

More TLSv1.3 cookie tests

Test sending a cookie without a key_share

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)

Fix HRR bug

If an HRR gets sent without a key_share (e.g. cookie only) then the code
fails when it should not.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)

Don't do the final key_share checks if we are in an HRR

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3414)

Fix some copy&paste errors and update following review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3410)

Add some badly formatted compression methods tests

Test that sending a non NULL compression method fails in TLSv1.3 as well
as other similar tests.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3410)

Verify that only NULL compression is sent in TLSv1.3 ClientHello

It is illegal in a TLSv1.3 ClientHello to send anything other than the
NULL compression method. We should send an alert if we find anything else
there. Previously we were ignoring this error.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3410)

Fix an s_server infinite loop

Commit c4666bfa changed s_server so that it asked libssl rather than the
underlying socket whether an error is retryable or not on the basis that
libssl has more information. That is true unfortunately the method used
was wrong - it only checks libssl's own internal state rather than both
libssl and the BIO. Should use SSL_get_error() instead.

This issue can cause an infinite loop because some errors could appear as
retryable when in fact they are not.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3317)

Add unit test for PEM_FLAG_ONLY_B64

Get some trivial test coverage that this flag does what it claims to.

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)

Make PEM_read_{,bio_}PrivateKey use secmem

We now have a version of PEM_read_bytes that can use temporary
buffers allocated from the secure heap; use them to handle this
sensitive information.

Note that for PEM_read_PrivateKey, the i/o still goes through
stdio since the input is a FILE pointer.  Standard I/O performs
additional buffering, which cannot be changed to use the OpenSSL
secure heap for temporary storage.  As such, it is recommended
to use BIO_new_file() and PEM_read_bio_PrivateKey() instead.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)

Add PEM_bytes_read_bio_secmem()

Split the PEM_bytes_read_bio() implementation out into a
pem_bytes_read_bio_flags() helper, to allow it to pass PEM_FLAG_SECURE
as needed.  Adjust the cleanup to properly use OPENSSL_secure_free()
when needed, and reimplement PEM_bytes_read() as a wrapper around
the _flags helper.

Add documentation for PEM_bytes_read_bio() and the new secmem variant.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)

Add PEM_read_bio_ex

The extended function includes a 'flags' argument to allow callers
to specify different requested behaviors.  In particular, callers can
request that temporary storage buffers are allocated from the secure heap,
which could be relevant when loading private key material.

Refactor PEM_read_bio to use BIO_mems instead of BUFs directly,
use some helper routines to reduce the overall function length, and make
some of the checks more reasonable.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1700)

Added a new Makefile in demos/evp directory
Fixed compilation warning in file aesgcm.c

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3406)

Update the message callback documentation

Update the message callback documentation to cover the new inner content
type capability. Also major update of the documentation which was very out
of date.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3408)

Add support to SSL_trace() for inner content types

When using the -trace option with TLSv1.3 all records appear as "application
data". This adds the ability to see the inner content type too.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3408)

Remove support for OPENSSL_SSL_TRACE_CRYPTO

This trace option does not appear in Configure as a separate option and is
undocumented. It can be switched on using "-DOPENSSL_SSL_TRACE_CRYPTO",
however this does not compile in master or in any 1.1.0 released version.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3408)

Updates to supported_groups following review feedback

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3395)

Add a test for supported_groups in the EE message

Check we send supported_groups in EE if there is a group we prefer instead
of the one sent in the key_share.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3395)

Send the supported_groups extension in EE where applicable

The TLSv1.3 spec says that a server SHOULD send supported_groups in the
EE message if there is a group that it prefers to the one used in the
key_share. Clients MAY act on that. At the moment we don't do anything
with it on the client side, but that may change in the future.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3395)

test/recipes/95-test_*.t : correct skip_all syntax

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3400)

Rearrange test/recipes/95-test_*.t to use skip_all

The conditions to skip these recipes entirely don't show in a
non-verbose test harness output.  We prefer to know, so use skip_all,
as it is a little bit more verbose.

[extended tests]

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3398)

Conversion of the EC tests to use the framework.
Some refactoring done as well.

The prime_field_tests() function needs splitting and refactoring still.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3340)

sha/sha512.c: fix formatting.

Reviewed-by: Richard Levitte <levitte@openssl.org>

perlasm/x86_64-xlate.pl: work around problem with hex constants in masm.

Perl, multiple versions, for some reason occasionally takes issue with
letter b[?] in ox([0-9a-f]+) regex. As result some constants, such as
0xb1 came out wrong when generating code for MASM. Fixes GH#3241.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3385)

Remove some out of date text inadvertently left behind

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3386)

Remove outdated and unsupported CHIL engine

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3389)

Fix pathname errors in errcode file

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3388)

Fix tests of TEST tests, as it were

Fix warning/bug in rc5test
Remove useless/warning-only test from dsatest.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3387)

Test framework output improvement.

Format the test failure output more nicely.

More vertical space is used to make things a little clearer.  Tests are expected
to pass so this doesn't impact the normal case.

Strings and memory comparisons highlight differences.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3357)

test/exptest.c: stop marking progress with a period

Because we now have TAP output for every mod_exp round, there's no
more need to mark the round with outputting a period.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3380)

Updates to serverinfo fix based on review feedback

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)

Add a test for loading serverinfo data from memory

The previous commit fixed a bug which occurs when serverinfo is loaded
from memory (not from a file). This adds a test for loading serverinfo
from memory.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)

Fix SSL_CTX_use_serverinfo_ex() et al to properly handle V1 data

SSL_CTX_use_serverinfo_ex() et al were always processing data as if it was
V2 format, even if it was V1. This bug was masked because, although we had
a test which loaded V1 serverinfo data from a file, the function
SSL_CTX_use_serverinfo_file() transparently converts V1 data to V2 before
calling SSL_CTX_use_serverinfo_ex().

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)

Revert "Fix clang compile time error"

This reverts commit 1608d658af4163d2096cb469705d4ba96067877b.

This is the wrong fix for this issue. The next commit provides a better
fix.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3382)

Don't leave stale errors on queue if DSO_dsobyaddr() fails

The init code uses DSO_dsobyaddr() to leak a reference to ourselves to
ensure we remain loaded until atexit() time. In some circumstances that
can fail and leave stale errors on the error queue.

Fixes #3372

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3383)

Fix an uninit read in igetest

Introduced by commit 0e534337b

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/2284)

Fix clang compile time error

|version| "could" be used uninitialized here, not really, but the
compiler doesn't understand the flow

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3373)

Fix curly braces on util/mkrc.pl

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3368)

Run perltidy, use strict+warnings on mkrc.pl

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3368)

Perltidy ck_errf

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3368)

Remove some unused scripts

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3368)

Update tls13secretstest test vectors for TLSv1.3 draft-20

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3371)

Update the TLSv1.3 version indicator for draft-20

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3371)

Update the HKDF labels for draft-20

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3371)

Limit padded record to max plaintext

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3374)

Update the documentation for "Groups" and "Curves"

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3375)

Add the -groups option to s_server/s_client

This should have been added before but was missed.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3375)

Update serverinfo documentation based on feedback received

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Clarify serverinfo usage with Certificate messages

Ensure that serverinfo only gets added for the first Certificate in a list.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Document the new SSL_CTX_use_serverinfo_ex() function

Also document other releated changes to the serverinfo capability.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Add an SSL_ prefix to SERVERINFOV2 and SERVERINFOV1

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Add a test for CT in TLSv1.3

This also tests the SERVERINFO2 file format.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Add a SERVERINFOV2 format test file

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Only send custom extensions where we have received one in the ClientHello

We already did this for ServerHello and EncryptedExtensions. We should be
doing it for Certificate and HelloRetryRequest as well.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Extend the SERVERINFO file format to include an extensions context

This enables us to know what messages the extensions are relevant for in
TLSv1.3. The new file format is not compatible with the previous one so
we call it SERVERINFOV2.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3298)

Added support for ESSCertIDv2

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/771)

Update igetest to use the test framework.

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3210)

Convert uses of snprintf to BIO_snprintf

Fixes #2360
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3366)

Fix some error path logic in i2v_AUTHORITY_INFO_ACCESS and i2v_GENERAL_NAME

Fixes #1653 reported by Guido Vranken

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3362)

Fix comment around safari fingerprint check

Fixes #2442

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3367)

Fix URL links in comment

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3365)

Add some man page cross-references

The old/deprecated servername callback should refer back to the
new/preferred early callback mechanism, as well as indicate that
it is superseded by the early callback.

The early callback should also mention the API for turning the
raw cipherlist octets from the client into usable data structures.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3338)

Convert danetest, ssl_test_ctx_test

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/3256)