Check if num is 0 before trying to malloc memory. Otherwise for client hellos without extensions SSL_client_hello_get1_extensions_present will return MALLOC_FAILURE.

Reviewed-by: Paul Yang <yang.yang@baishancloud.com>
Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8756)

Add some more test vectors for ChaCha20

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8780)

Clarify the documentation on the use of ChaCha20

Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8780)

Create provider errors and use them

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Fix the S390X support for the basic AES ciphers

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add forward declarations of the AES dispatch table functions

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Make implementation of blocksize, iv_length and key_length mandatory

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add a maximum output length to update and final calls

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add iv length and key length params to the cipher init calls

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CTR ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CFB ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES OFB ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement AES CBC ciphers in the default provider

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add support in the default provider for 192/128 bit AES ECB

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Add the provider_algs.h internal header file

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Implement support for AES-256-ECB in the default provider

We also lay the ground work for various of other the basic AES ciphers.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

Make EVP_Encrypt*/EVP_Decrypt* and EVP_Cipher* provider aware

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8700)

ossl_method_store_cache_get(): ensure non-NULL property query

The comparator further down the call stack doesn't tolerate NULL, so
if we got that as input, use the empty string.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

OPENSSL_LH_flush(): assign NULL after freeing

OPENSSL_LH_flush() frees the linked lists for each slot, but didn't
set the list head to NULL after doing so, with the result that an
operation that affects these lists is likely to cause a crash.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

Fix the generic EVP algorithm fetch to actually cache them

ossl_method_store_cache_get() and ossl_method_store_cache_set() were
called with a NULL argument for store, which means no caching is
done.  Give them a real store instead.

Also, increment the refcount when we do get a method out of the cache.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8781)

asn1parse: avoid double free

|str| was used for multiple conflicting purposes.  When using
'-strictpem', it's used to uniquely hold a reference to the loaded
payload.  However, when using '-strparse', |str| was re-used to hold
the position from where to start parsing.

So when '-strparse' and '-strictpem' are were together, |str| ended up
pointing into data pointed at by |at|, and was yet being freed, with
the result that the payload it held a reference to became a memory
leak, and there was a double free conflict when both |str| and |at|
were being freed.

The situation is resolved by always having |buf| hold the pointer to
the file data, and always and only use |str| to hold the position to
start parsing from.  Now, we only need to free |buf| properly and not
|str|.

Fixes #8752

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8753)

Add SSHKDF in evp_kdf_test

Signed-off-by: Simo Sorce <simo@redhat.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8774)

chacha/asm/chacha-armv8.pl: replace 3+1 code paths with 4+1.

The change is triggered by ThunderX2 where 3+1 was slower than scalar
code path, but it helps all processors [to handle <512 inputs].

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

aes/asm/aesv8-armx.pl: ~20% improvement on ThunderX2.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

ARM64 assembly pack: add ThunderX2 results.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8776)

SP 800-56B steps enumerated.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8770)

Add test for the BIO_s_mem rdwr->rdonly->rdwr use-case

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Add documentation for the BIO_s_mem pecularities

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Add testing of RDONLY memory BIOs

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Add test for the BIO_get_mem_ptr() regression

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Fix for BIO_get_mem_ptr and related regressions

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8649)

Call RSA generation callback at the correct time.

The callback should be called with 1 when a Miller-Rabin round marked
the candidate as probably prime.

Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
GH: #8742

Don't use '-z defs' with Clang's sanitizers

The clang documentation in all sanitizers we currently use says this:

    When linking shared libraries, the {flavor}Sanitizer run-time is
    not linked, so -Wl,-z,defs may cause link errors (don’t use it
    with {flavor}Sanitizer)

(in our case, {flavor} is one of Address, Memory, or UndefinedBehavior)

Therefore, we turn off that particular flag specifically when using
the sanitizers.

Fixes #8735

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8749)

providers/common/digests/sha2.c: forward declare all dispatched functions

Forward declare the dispatched functions using typedefs from
core_numbers.h.  This will ensure that they have correct signatures.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8747)

Providers: for the digest_final operation, pass a output buffer size

This allows the provider digest_final operation to check that it
doesn't over-run the output buffer.

The EVP_DigestFinal_ex function doesn't take that same parameter, so
it will have to assume that the user provided a properly sized buffer,
but this leaves better room for future enhancements of the public API.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8747)

Fix calling convention bug in ecp_nistz256_ord_sqr_mont

The rep parameter takes an int in C, but the assembly implementation
looks at the upper bits. While it's unlikely to happen here, where all
calls pass a constant, in other scenarios x86_64 compilers will leave
arbitrary values in the upper half.

Fix this by making the C prototype match the assembly. (This aspect of
the calling convention implies smaller-than-word arguments in assembly
functions should be avoided. There are far fewer things to test if
everything consistently takes word-sized arguments.)

This was found as part of ABI testing work in BoringSSL.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8108)

Don't use coordinate blinding when scalar is group order

This happens in ec_key_simple_check_key and EC_GROUP_check.
Since the the group order is not a secret scalar, it is
unnecessary to use coordinate blinding.

Fixes: #8731

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8734)

Further harmonisation of manual page HISTORY sections

A couple of minor tweaks to match the style introduced in #7854:
- BIO_connect: remove line break to make more grep friendly
- SSL_CTX_new: harmoise the format of the HISTORY section

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Update various man pages to place HISTORY section after SEE ALSO

SEE ALSO before HISTORY is the more common pattern in OpenSSL manual
pages and seems to be the prevalent order based on sampling my system
manual pages.

Fixes #8631

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Add a check for history section location to find-doc-nits

Check that the HISTORY section is located after the SEE ALSO section,
this is a much more frequent order in OpenSSL manual pages (and UNIX
manual pages in general).

Also check that SEE ALSO comes after EXAMPLES, so that the tool can
ensure the correct manual section sequence.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Make check_example_location() in find-doc-nits generic

Change to check_section_location(), a generic function to ensure that
section SECTION appears before section BEFORE in the man pages.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8729)

Deprecate AES_ige_encrypt() and AES_bi_ige_encrypt()

These undocumented functions were never integrated into the EVP layer
and implement the AES Infinite Garble Extension (IGE) mode and AES
Bi-directional IGE mode. These modes were never formally standardised
and usage of these functions is believed to be very small. In particular
AES_bi_ige_encrypt() has a known bug. It accepts 2 AES keys, but only
one is ever used. The security implications are believed to be minimal,
but this issue was never fixed for backwards compatibility reasons.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8710)

Add CMAC speed measurements

usage: openssl speed -cmac aes128

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8721)

Add prediction resistance capability to the DRBG reseeding process.

Refer to NIST SP 800-90C section 5.4 "Prediction Resistance.l"

This requires the seed sources to be approved as entropy sources, after
which they should be considered live sources as per section 5.3.2 "Live
Entropy Source Availability."

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8647)

ec key validation checks updated

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8564)

doc fixups

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

Separate the lookup test

This fixes the "verifying the alias" case.
Actually, while working on it, I realized that conceptually we were
testing the 2 different behaviours of `EC_GROUP_check_named_curve()` at
the same time, and actually not in the proper way.

I think it's fair to assume that overwriting the curve name for an
existing group with `NID_undef` could lead to the unexpected behaviour
we were observing and working around.
Thus I decided to separate the lookup test in a dedicated simpler test
that does what the documentation of `EC_GROUP_check_named_curve()`
suggests: the lookup functionality is meant to find a name for a group
generated with explicit parameters.

In case an alternative alias is returned by the lookup instead of the
expected nid, to avoid doing comparisons between `EC_GROUP`s with
different `EC_METHOD`s, the workaround is to retrieve the `ECPARAMETERS`
of the "alias group" and create a new explicit parameters group to use
in `EC_GROUP_cmp()`.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

EC_GROUP_set_curve() might fail for arbitrary params

Setting arbitrary `p`, `a` or `b` with `EC_GROUP_set_curve()` might fail
for some `EC_GROUP`s, depending on the internal `EC_METHOD`
implementation, hence the block of tests verifying that
`EC_GROUP_check_named_curve()` fails when any of the curve parameters is
changed is modified to run only if the previous `EC_GROUP_set_curve()`
call succeeds.

`ERR_set_mark()` and `ERR_pop_to_mark()` are used to avoid littering the
thread error stack with unrelated errors happened during
`EC_GROUP_set_curve()`.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

added code to validate EC named curve parameters

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8555)

Added Test::ok_nofips, Test::is_nofips & Test::isnt_nofips methods.
Used to check that a test fails in fips mode i.e. ok_nofips(run(...))

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8661)

Reseeding without derivation function is not supported in FIPS mode.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8648)

Fixed linux_x86_icc compiler errors in EC code related to __uint128_t/__int128_t

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8697)

Avoid creating invalid rsa pss params

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8621)

Fix typos

CLA: trivial

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8714)

EVP_*Update: ensure that input NULL with length 0 isn't passed

Even with custome ciphers, the combination in == NULL && inl == 0
should not be passed down to the backend cipher function.  The reason
is that these are the values passed by EVP_*Final, and some of the
backend cipher functions do check for these to see if a "final" call
is made.

Fixes #8675

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8676)

Make X509_set_sm2_id consistent with other setters

This commit makes the X509_set_sm2_id to 'set0' behaviour, which means
the memory management is passed to X509 and user doesn't need to free
the sm2_id parameter later. API name also changes to X509_set0_sm2_id.

Document and test case are also updated.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8626)

test/params_test.c : Adjust tests to check utf8_ptr sizes

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8703)

Params API: {utf8,octet}_ptr need to know the data size

When the purpose is to pass parameters to a setter function, that
setter function needs to know the size of the data passed.  This
remains true for the pointer data types as well.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8703)

Fix crash in X509_STORE_CTX_get_by_subject

If using a custom X509_LOOKUP_METHOD then calls to
X509_STORE_CTX_get_by_subject may crash due to an incorrectly initialised
X509_OBJECT being passed to the callback get_by_subject function.

Fixes #8673

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8698)

Add a legacy provider and put MD2 in it

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8541)

Use the right NID when putting a method in the store

When we attempt to fetch a method with a given NID we will ask the
providers for it if we don't already know about it. During that process
we may be told about other methods with a different NID. We need to
make sure we don't confuse the two.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8541)

Configurations/10-main.conf: Don't inherit assembler in Cygwin-common

The targets Cygwin-x86 and Cygwin-x86_64 are the ones that should do
this.

Fixes #8684

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8685)

Params: add OSSL_PARAM_construct_end()

OSSL_PARAM_END is a macro that can only be used to initialize an
OSSL_PARAM array, not to assign an array element later on.  For
completion, we add an end constructor to facilitate that kind of
assignment.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8704)

EC keygen updates + changed ecdsa_sign to use BN_secure_new

Reviewed-by: Nicola Tuveri <nic.tuv@gmail.com>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8557)

Coverity: hkdf ENV_MD_size() is an int that can be negative

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8692)

Avoid alignment problems in params API.

Using a byte buffer causes problems for device that don't handle unaligned
reads.  Instead use the properly aligned variable that was already pointed at.

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8696)

s_client starttls: fix handling of multiline reply

Fixes #8645

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8654)

coverity resource leak fixes in apps/pkeyutl

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8691)

fix --strict-warnings build

ISO C90 forbids specifying subobject to initialize

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8693)

fix --strict-warnings build

C++ style comments are not allowed in ISO C90

Signed-off-by: Patrick Steuer <patrick.steuer@de.ibm.com>
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8693)

Coverity: fix two minor NPD issues.
Found by Coverity.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8274)

Fix big endian param API tests.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Bernd Edlinger <bernd.edlinger@hotmail.de>
(Merged from https://github.com/openssl/openssl/pull/8629)

Fix the allocation size in EVP_OpenInit and PEM_SignFinal

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8620)

EVP configuration section: add 'default_properties' command

The value of the 'default_properties' command is simply passed to
EVP_set_default_properties().

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8681)

EVP_set_default_properties(): New function to set global properties

EVP_MD_fetch() can be given a property query string.  However, there
are cases when it won't, for example in implicit fetches.  Therefore,
we also need a way to set a global property query string to be used in
all subsequent fetches.  This also applies to all future algorithm
fetching functions.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8681)

Convert the ENGINE_CONF trace calls to use CONF instead

Additionally, merge ENGINE_CONF into CONF.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8680)

Add a bit of tracing in the core conf module runner

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8680)

Rename the PROVIDER_CONF trace to CONF

Other configuration modules may have use for tracing, and having one
tracing category for each of them is a bit much.  Instead, we make one
category for them all.

Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8680)

OPENSSL_init_crypto(): check config return code correctly

It was assumed that the config functionality returned a boolean.
However, it may return a negative number on error, so we need to take
that into account.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8679)

Fix number clash: EVP_F_AESNI_XTS_INIT_KEY vs EVP_F_EVP_MD_BLOCK_SIZE

The three macros EVP_F_AESNI_XTS_INIT_KEY, EVP_F_AES_T4_XTS_INIT_KEY
and EVP_F_AES_XTS_INIT_KEY are affected.

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8682)

Move the AES-XTS mode duplicated key check into the init_key function rather
than the update call.  The means an earlier error return at the cost of some
duplicated code.

Reviewed-by: Matthias St. Pierre <Matthias.St.Pierre@ncp-e.com>
(Merged from https://github.com/openssl/openssl/pull/8625)

Complain if there are missing symbols when creating a provider .so file

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8537)

Test that we can use the FIPS provider

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8537)

Add a no-fips Configure option

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8537)

Create a FIPS provider and put SHA256 in it

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8537)

trace: add PROVIDER_CONF trace category

Fixes #8667

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8672)

Correct the documentation about SSL_CIPHER_description()

There are some ciphersuites that were introduced in TLSv1.0/TLSv1.1 but
are backwards compatible with SSLv3.

Fixes #8655

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8658)

Skip the correct number of tests if SM2 is disabled

Fixes no-sm2 (and also no-sm3 and no-ec)

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8650)

For provider tests, don't define a OPENSSL_NO_ macro

Since the macro to indicate if the test provider module is available
is local to the test programs, it's better to use a name that isn't
as easily confused with a library feature disabling macro that one
would expect to find in opensslconf.h.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8664)

Document the 'no-module' configuration option

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8665)

Correct EVP_F_EVP_MD_BLOCK_SIZE number

The number that was used was already taken

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8656)

Use AI_ADDRCONFIG hint with getaddrinfo if available.

This prevents failure of openssl s_server socket binding to wildcard
address on hosts with disabled IPv6.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8550)

Modify OCSP to use alt MD for cert IDs in responses

Modify openssl OCSP utility to produce certIDs in responses using other
hash algorithms (e.g. SHA256).

Added option -rcid for this purpose.

Reviewed-by: Ben Kaduk <kaduk@mit.edu>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/5274)

Add a test for EVP_MD_block_size()

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8604)

Support EVP_MD_block_size() with providers

Fixes #8565

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8604)

Add an EVP_MD_CTX_md() test

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8614)

Ensure EVP_MD_CTX_md returns the EVP_MD originally used

Fixes #8613

Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8614)

replaced snprintf with BIO version (for windows builds)

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8651)

Replumbing: add documentation for the provider configuration module

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)

Add test for the provider configuration module

We reuse test/provider_internal_test.c and test/p_test.c,
and get it loaded one more time via the configuration file
test/provider_internal_test.conf

To support different platform standards regarding module
extensions, we generate test/provider_internal_test.conf

Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/8549)