Antonio Borneo [Wed, 1 Jul 2015 06:15:03 +0000 (14:15 +0800)]
stm32f4: fix minor typo in comment
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: u-boot@lists.denx.de
To: Kamil Lulko <rev13@wp.pl>
Cc: Tom Rini <trini@konsulko.com>
Antonio Borneo [Wed, 1 Jul 2015 06:15:02 +0000 (14:15 +0800)]
stm32f4: fix MAINTAINERS file
When "scripts/get_maintainer.pl" parses "board/.../MAINTAINERS",
it uses the line containing board name as delimiter.
Without this line, the script happily mixes the lines from current
board MAINTAINERS file with lines from another file.
Fix it by adding a reasonable board name.
Tested by comparing output of:
cat board/st/stm32f429-discovery/MAINTAINERS
./scripts/get_maintainer.pl -f board/st/stm32f429-discovery
Signed-off-by: Antonio Borneo <borneo.antonio@gmail.com>
To: u-boot@lists.denx.de
To: Kamil Lulko <rev13@wp.pl>
Cc: Tom Rini <trini@konsulko.com>
Egli, Samuel [Wed, 1 Jul 2015 15:57:39 +0000 (17:57 +0200)]
siemens,am33x: adjust mtd partition
Use one mtd partition for rootfs and configuration by
means of ubi volumes and get rid of configuration partition.
We can use partition layout for both 256MB and 512MB flash.
Signed-off-by: Samuel Egli <samuel.egli@siemens.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Roger Meier <r.meier@siemens.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Heiko Schocher <hs@denx.de>
Yegor Yefremov [Mon, 6 Jul 2015 15:28:36 +0000 (17:28 +0200)]
arm: baltos: fix NAND boot
Specify proper U-Boot offset, enable prefetch mode,
increase bootm size and add FIT fallback, if board_name
is not present in kernel-fit.itb image.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Yegor Yefremov [Mon, 6 Jul 2015 15:28:35 +0000 (17:28 +0200)]
arm: baltos: drop I2C speed to 1000 Hz
This action is need to make I2C communication with PMIC
stable for low temperature. Print current I2C speed in
SPL for visual control.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Yegor Yefremov [Mon, 6 Jul 2015 15:28:34 +0000 (17:28 +0200)]
arm: baltos: enable CMD_NET and FIT support in defconfig
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Yegor Yefremov [Tue, 30 Jun 2015 07:59:47 +0000 (09:59 +0200)]
arm: convert am3517_crane and am3517_evm to generic boards
Add CONFIG_SYS_GENERIC_BOARD to board's config header.
Boot-tested on am3517_evm board.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Roger Quadros [Thu, 25 Jun 2015 07:25:50 +0000 (10:25 +0300)]
ARM: beagle_x15: prevent DCAN1 _wait_target_disable failure in kernel
If board is booted with transitions happening on DCAN1 pins then
the following warning is seen in the kernel at boot when the
hwmod layer initializes.
"omap_hwmod: dcan1: _wait_target_disable failed"
This is because DCAN1 module's SWAKEUP mechanism is broken
and it fails to correctly turn OFF if it sees a transition on the
DCAN1 pins. Suggested workaround is to keep DCAN1 pins in safe mode
while enabling/disabling DCAN1 module.
The hwmod layer enables and disables all modules at boot
and we have no opportunity to put the DCAN1 pins in safe mode
at that point.
DCAN1 is not used by u-boot so it doesn't matter to it if these
pins are in safe mode. The kernel driver correctly configures
the right mode when DCAN1 is active.
Signed-off-by: Roger Quadros <rogerq@ti.com>
[trini: s/PULLUP/PULL_UP/ based on DRA7xx EVM version of this patch]
Signed-off-by: Tom Rini <trini@konsulko.com>
Roger Quadros [Wed, 24 Jun 2015 14:00:11 +0000 (17:00 +0300)]
ARM: DRA7-evm: prevent DCAN1 _wait_target_disable failure in kernel
If board is booted with transitions happening on DCAN1 pins then
the following warning is seen in the kernel at boot when the
hwmod layer initializes.
"omap_hwmod: dcan1: _wait_target_disable failed"
This is because DCAN1 module's SWAKEUP mechanism is broken
and it fails to correctly turn OFF if it sees a transition on the
DCAN1 pins. Suggested workaround is to keep DCAN1 pins in safe mode
while enabling/disabling DCAN1 module.
The hwmod layer enables and disables all modules at boot
and we have no opportunity to put the DCAN1 pins in safe mode
at that point.
DCAN1 is not used by u-boot so it doesn't matter to it if these
pins are in safe mode. The kernel driver correctly configures
the right mode when DCAN1 is active.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Prabhakar Kushwaha [Thu, 2 Jul 2015 06:30:17 +0000 (12:00 +0530)]
Makefile:Add GCC flag -fno-delete-null-pointer-checks
-fdelete-null-pointer-checks flag controls global dataflow analyses and
eliminate useless checks for null pointers; It assume that if a pointer is
checked after it has already been dereferenced, it cannot be null.
This flag is enabled by default.
gcc v4.9 has more optimizations added to this option. Hence it is very
aggressive with GCC v4.9 series. Add -fno-delete-null-pointer-checks to
disable the optimization
Signed-off-by: Rohit Dharmakan <rohitarulraj@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Simon Glass [Tue, 30 Jun 2015 22:03:02 +0000 (16:03 -0600)]
ti: Add SPDX license identifier to omap.h
This also came from Linux - according to this thread it has a GPL v2
license like arch/arm/mach-omap2/mux.h:
http://lists.denx.de/pipermail/u-boot/2015-June/217827.html
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Ingrid Viitanen <ingrid.viitanen@nokia.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Masahiro Yamada [Tue, 7 Jul 2015 09:47:17 +0000 (18:47 +0900)]
README.distro: fix typos
The word "partition" is doubled. Keep decent forms for the
following lines.
Also, fix some other typos while we are here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
Joe Hershberger [Mon, 22 Jun 2015 22:57:37 +0000 (17:57 -0500)]
blackfin: Fix build regression due to image size
bf533-stamp, bf538f-ezkit, and cm-bf548 are very space limited.
This was introduced by:
6e0d26c0502e (net: Handle ethaddr changes as an env callback)
by enabling CONFIG_REGEX, which is too big for these boards.
This patch disables CONFIG_REGEX at the expense of working with more
than the first ethaddr.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Joe Hershberger [Mon, 22 Jun 2015 22:57:36 +0000 (17:57 -0500)]
Allow CONFIG_REGEX to be disabled when CONFIG_NET
Instead of selecting REGEX when NET is enabled, make it the default, but
allow boards that are tiny to disable it and lose functionality on all
but the first Ethernet adapter.
cm-bf548, bf538f-ezkit, and bf533-stamp need this. None appear to have
more than one Ethernet interface.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Tom Rini [Wed, 8 Jul 2015 21:14:02 +0000 (17:14 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-mips
Bin Meng [Mon, 15 Jun 2015 10:40:19 +0000 (18:40 +0800)]
net: designware: Program MAC address to hardware after soft reset
commit
f566c99 "net: Update hardware MAC address if it changes in env"
removes writing MAC address to designware controller after soft reset.
This makes designware ethernet port fail to work. Actually the MAC
address should always be programmed after soft reset.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Hans de Goede [Wed, 8 Jul 2015 14:18:39 +0000 (16:18 +0200)]
sunxi: Adjust Ippo_q8h_v1_2_a33_1024x600 dts filename to match the upstream kernel
sun8i-a33-ippo-q8h-v1.2-lcd1024x600.dts has been merged into the upstream
Linux kernel as sun8i-a33-ippo-q8h-v1.2.dts, adjust u-boot to follow.
Note we've never shipped a final u-boot version with the old name, so this
is safe todo.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Mugunthan V N [Mon, 22 Jun 2015 09:13:10 +0000 (14:43 +0530)]
ARM: DRA72x: fix io delay calibration for ethernet
we currently use in-development IODelay values for DRA72x which are
proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet
Phy over RGMII. The PHY characteristics and routing choices made on
the EVM, make the current iodelay values fail ethernet communication.
Instead, we need to choose custom values for DRA72x-evm specifically
designed for the PHY and routing on the platform for ethernet to
function.
Cc: Nishanth Menon <nm@ti.com>
Cc: Lokesh Vutla <lokeshvutla@ti.com>
Tested-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Tom Rini [Tue, 7 Jul 2015 12:42:35 +0000 (08:42 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-arm
Yegor Yefremov [Wed, 1 Jul 2015 20:17:34 +0000 (22:17 +0200)]
board: baltos - add maintainer information
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Masahiro Yamada [Fri, 3 Jul 2015 07:13:09 +0000 (16:13 +0900)]
ARM: disable HAVE_PRIVATE_LIBGCC for ARM64
We have not supported the private library for ARM 64bit.
Prohibit ARM64 boards from enabling it until we make things ready.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Lokesh Vutla [Thu, 2 Jul 2015 04:07:59 +0000 (09:37 +0530)]
board: am43xx: Add maintainer information
am43xx_evm_ethboot/usbhost_boot_defconfig entries are
missing in MAINTAINER file. Adding entries for them.
Reported-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Albert ARIBAUD \(3ADEV\) [Wed, 1 Jul 2015 13:28:39 +0000 (15:28 +0200)]
cairo: add missing MAINTAINERS file
This removes the following two warnings from buildman:
WARNING: no status info for 'cairo'
WARNING: no maintainers for 'cairo'
Signed-off-by: Albert ARIBAUD (3ADEV) <albert.aribaud@3adev.fr>
Siva Durga Prasad Paladugu [Fri, 29 May 2015 07:54:37 +0000 (09:54 +0200)]
arm: dcc: Add uart dcc support for armv8
Added UART DCC support for armv8
Signed-off-by: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Simon Glass [Tue, 2 Jun 2015 17:08:21 +0000 (11:08 -0600)]
Revert "break build if it would produce broken binary"
The root cause of this problem should now be fixed.
This reverts commit
a6a4c542d316b3401f0840ac5378743191bca851.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Pavel Machek <pavel@denx.de>
Tested-by: Pavel Machek <pavel@denx.de>
Simon Glass [Tue, 2 Jun 2015 17:08:20 +0000 (11:08 -0600)]
arm: Add ENTRY/ENDPROC to private libgcc functions
When CONFIG_SYS_THUMB_BUILD is defined these functions may be called from
Thumb code. Add the required ENTRY and ENDPROC bracketing so that BLX is
used to call these ARM functions, instead of plain BL, which will fail.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Pavel Machek <pavel@denx.de>
Albert ARIBAUD [Tue, 7 Jul 2015 09:38:44 +0000 (11:38 +0200)]
Merge branch 'u-boot/master' into 'u-boot-arm/master'
Pavel Machek [Wed, 8 Apr 2015 12:15:54 +0000 (14:15 +0200)]
armv7: better comment in start.S
Fix big/small letters in comment.
Signed-off-by: Pavel Machek <pavel@denx.de>
Tested-by: Marek Vasut <marex@denx.de>
Axel Lin [Tue, 14 Apr 2015 06:55:24 +0000 (14:55 +0800)]
gpio: lpc32xx: Use priv_data instead of platdata
The LPC32XX GPIO driver platdata currently contains GPIO state information,
which should go into priv_data. Thus rename lpc32xx_gpio_platdata to
lpc32xx_gpio_priv and convert to use dev_get_priv() instead.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Tested-by: Albert ARIBAUD <albert.aribaud@3adev.fr>
Tom Rini [Mon, 6 Jul 2015 01:22:22 +0000 (21:22 -0400)]
Merge branch 'master' of git.denx.de/u-boot-sunxi
Chen-Yu Tsai [Tue, 23 Jun 2015 11:57:27 +0000 (19:57 +0800)]
sunxi: Add Sinlinx SinA33 defconfig
Sinlinx SinA33 is a core/daughter board SDK kit from Sinlinx. It has
the A33 SoC, USB host, USB OTG, audio input/output, LCD, camera, SDIO
and GPIO headers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Chen-Yu Tsai [Tue, 23 Jun 2015 11:57:26 +0000 (19:57 +0800)]
sunxi: Sync sun8i dts files with the linux kernel
Copy over all the latest dts changes from mripard/sunxi/dt-for-4.2.
This adds a dts file for Sinlinx SinA33 dev board, and the required
changes in the .dtsi files.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Chen-Yu Tsai [Tue, 23 Jun 2015 11:57:25 +0000 (19:57 +0800)]
sunxi: Add support for UART0 in PB pin group on A33
The A33 adds a pinmux function for UART0 in the PB pin group.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Chen-Yu Tsai [Tue, 23 Jun 2015 11:57:24 +0000 (19:57 +0800)]
sunxi: rsb: Enable R_PIO clock before configuring external pins
The original code was configuring the external pins after enabling
the R_PIO clock, which meant the configuration never made it to
the pin controller the first time in SPL.
Why this was working before is uncertain. Maybe the state was left
from a previous boot sequence, or RSB just happened to be the default
configuration. However with some A33 chips, SPL failed to configure
the PMIC. This was seen by me and Maxime on the Sinlinx SinA33 dev
board.
Reordering the calls fixed this.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Chen-Yu Tsai [Tue, 23 Jun 2015 11:57:23 +0000 (19:57 +0800)]
sunxi: hardware-feature-specific function index defines for PORT F UART0
Commit
487b327 ("sunxi: GPIO pin mux hardware-feature-specific function
index defines") renamed all GPIO index defines, but missed the PORT F
UART0 setup functions.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Tom Rini [Fri, 3 Jul 2015 12:36:29 +0000 (08:36 -0400)]
Merge branch 'master' of git://denx.de/git/u-boot-imx
Conflicts:
configs/tbs2910_defconfig
configs/tqma6q_mba6_mmc_defconfig
configs/tqma6q_mba6_spi_defconfig
configs/tqma6s_mba6_mmc_defconfig
configs/tqma6s_mba6_spi_defconfig
include/configs/mx6_common.h
Signed-off-by: Tom Rini <trini@konsulko.com>
Sanchayan Maity [Mon, 8 Jun 2015 07:10:41 +0000 (12:40 +0530)]
colibri_vf: Increase console IO buffer size to 1024
Increase console IO buffer size to 1024 from the previous value of 256.
The previous value was too short for editing environment variables like
ubiboot from the console.
Signed-off-by: Sanchayan Maity <maitysanchayan@gmail.com>
Daniel Schwierzeck [Wed, 1 Jul 2015 14:36:43 +0000 (16:36 +0200)]
MIPS: change 'extern inline' to 'static inline'
The kernel changed it a long time ago. Also this is now broken
on gcc-5.x.
Reported-by: Andy Kennedy <andy.kennedy@adtran.com>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Tony Wu [Sat, 30 May 2015 07:02:39 +0000 (15:02 +0800)]
MIPS: fix missing semicolon in cacheops.h
Fix missing semicolon in cacheops.h introduced in commit
2b8bcc5a2 (MIPS: avoid .set ISA for cache operations)
Signed-off-by: Tony Wu <tung7970@gmail.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Tom Rini [Wed, 1 Jul 2015 19:38:12 +0000 (15:38 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-spi
Tom Rini [Wed, 1 Jul 2015 19:37:56 +0000 (15:37 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-uniphier
Angelo Dureghello [Sun, 21 Jun 2015 21:40:46 +0000 (23:40 +0200)]
spi: cf_qspi: fix clamp macro type check compilation warnings
Fix compilation warnings for redefined 'clamp' macro and non-uniform
clamp macro types.
Signed-off-by: Angelo Dureghello <angelo@sysam.it>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
Jagan Teki [Mon, 29 Jun 2015 18:18:31 +0000 (23:48 +0530)]
README: Remove CONFIG_SPI_FLASH_DATAFLASH help text
Since the help text is added in drivers/mtd/spi/Kconfig
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Mon, 29 Jun 2015 18:17:40 +0000 (23:47 +0530)]
README: Remove CONFIG_SPI_FLASH_BAR help text
Since the help text is added in drivers/mtd/spi/Kconfig
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Mon, 29 Jun 2015 18:02:17 +0000 (23:32 +0530)]
sf: Kconfig: Add SPI_FLASH_BAR entry
Added SPI_FLASH_BAR entry on Kconfig with help description
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Mon, 29 Jun 2015 17:06:18 +0000 (22:36 +0530)]
defconfig: Move CONFIG_SPI_FLASH_BAR from configs
This commit moves:
- CONFIG_SPI_FLASH_BAR
from include/configs/*.h into configs/*_defconfigs
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Mon, 29 Jun 2015 18:16:00 +0000 (23:46 +0530)]
README: Remove CONFIG_SPI_FLASH_MTD help text
Since the help text is added in drivers/mtd/spi/Kconfig
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Sat, 27 Jun 2015 10:37:54 +0000 (16:07 +0530)]
spi: Kconfig: Add TEGRA20_SLINK entry
Added TEGRA20_SLINK entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Jagan Teki [Sat, 27 Jun 2015 10:34:05 +0000 (16:04 +0530)]
spi: Kconfig: Add TEGRA20_SFLASH entry
Added TEGRA20_SFLASH entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Jagan Teki [Sat, 27 Jun 2015 10:27:53 +0000 (15:57 +0530)]
spi: Kconfig: Add TEGRA114_SPI entry
Added TEGRA114_SPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Tom Warren <twarren@nvidia.com>
Cc: Stephen Warren <swarren@nvidia.com>
Jagan Teki [Sat, 27 Jun 2015 10:13:27 +0000 (15:43 +0530)]
spi: Kconfig: Add ICH_SPI entry
Added ICH_SPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Jagan Teki [Sat, 27 Jun 2015 10:02:19 +0000 (15:32 +0530)]
spi: Kconfig: Add EXYNOS_SPI entry
Added EXYNOS_SPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jagan Teki [Sat, 27 Jun 2015 09:53:07 +0000 (15:23 +0530)]
spi: Kconfig: Add FSL_QSPI entry
Added FSL_QSPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Peng Fan <Peng.Fan@freescale.com>
Cc: Haikun Wang <haikun.wang@freescale.com>
Jagan Teki [Sat, 27 Jun 2015 09:51:36 +0000 (15:21 +0530)]
spi: Kconfig: Add FSL_ESPI entry
Added FSL_ESPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Haikun Wang <haikun.wang@freescale.com>
Jagan Teki [Sat, 27 Jun 2015 08:47:06 +0000 (14:17 +0530)]
spi: Kconfig: Add FSL_DSPI entry
Added FSL_DSPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Haikun Wang <haikun.wang@freescale.com>
Jagan Teki [Sat, 27 Jun 2015 17:07:00 +0000 (22:37 +0530)]
spi: Kconfig: Show dm-spi drivers if DM_SPI set
DM supported spi drivers are enbled only when DM_SPI enabled,
so added DM_SPI if condition in Kconfig to show thoese only
when it enabled.
Also re-order the config items as incresing alphabetic order.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Sat, 27 Jun 2015 08:21:53 +0000 (13:51 +0530)]
spi: Makefile: Use object file alphabetic order
Use object files as incresing alphabetic order, so-that it's
easy for readability.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 23:11:11 +0000 (04:41 +0530)]
spi: Kconfig: Add TI_QSPI entry
Added TI_QSPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Jagan Teki [Fri, 26 Jun 2015 23:02:43 +0000 (04:32 +0530)]
spi: Kconfig: Add XILINX_SPI entry
Added XILINX_SPI entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Jagan Teki [Sat, 27 Jun 2015 17:05:14 +0000 (22:35 +0530)]
spi: Add Kconfig menu entry
Added Kconfig menu ... endmenu enties for spi support.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Masahiro Yamada [Tue, 30 Jun 2015 09:43:45 +0000 (18:43 +0900)]
ARM: UniPhier: add IDs for PH1-Pro5, ProXstream2, PH1-LD6b
This prepares for new SoCs support.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 30 Jun 2015 09:27:01 +0000 (18:27 +0900)]
ARM: dts: UniPhier: re-license device tree files under GPLv2+/X11
The current GPL only licensing on the device trees makes it very
impractical for other software components licensed under another
license.
To make it easier to reuse them, the device trees for UniPhier
SoCs and boards have already been dual-licensed in Linux.
Follow this trend in U-boot too.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 30 Jun 2015 09:27:00 +0000 (18:27 +0900)]
ARM: dts: UniPhier: sync device trees with the Linux kernel
This makes code diff much easier.
Device trees describe hardware attributes, which are independent
of software architecture. It generally makes sense to synchronize
them beyond software projects.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Tue, 30 Jun 2015 08:10:22 +0000 (17:10 +0900)]
ARM: UniPhier: drop special CONFIG_AUTOBOOT_ settings
There is no good reason to use a particular key to stop autobooting.
The default allows us to stop the autoboot with any key input.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Jagan Teki [Wed, 1 Jul 2015 15:52:19 +0000 (21:22 +0530)]
sf: Kconfig: Add SPI_FLASH_DATAFLASH entry
Added SPI_FLASH_DATAFLASH entry on Kconfig with help description.
data flash driver comes with good decription, hence moved the
same on to kconfig help decription.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Haikun Wang <haikun.wang@freescale.com>
Jagan Teki [Sat, 27 Jun 2015 17:12:35 +0000 (22:42 +0530)]
sf: Kconfig: Add SPI_FLASH_MTD entry
Added SPI_FLASH_MTD entry on Kconfig with help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Jagan Teki [Sun, 28 Jun 2015 19:29:36 +0000 (00:59 +0530)]
sf: Kconfig: Update SPI_FLASH entry
Updated SPI_FLASH entry on Kconfig with depends on
and along with config help description.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 22:17:53 +0000 (03:47 +0530)]
common: Add CMD_SF Kconfig entry
Added Kconfig entry for CMD_SF.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Sat, 27 Jun 2015 17:09:36 +0000 (22:39 +0530)]
sf: Add Kconfig menu entry
Added Kconfig menu ... endmenu enties for spi flash suppor
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 21:54:53 +0000 (03:24 +0530)]
README: Add CONFIG_SPI_FLASH_DATAFLASH description
This patch adds CONFIG_SPI_FLASH_DATAFLASH descrition on README
file for more readble for users.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Sat, 27 Jun 2015 16:34:55 +0000 (22:04 +0530)]
sf: dataflash: Rename to CONFIG_SPI_FLASH_DATAFLASH
Rename CONFIG_SF_DATAFLASH into CONFIG_SPI_FLASH_DATAFLASH
as it follows the naming convention same as remaining configs.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Mon, 29 Jun 2015 08:47:32 +0000 (14:17 +0530)]
zynq: defconfig: Move CONFIG_OF_* to Kconfig
This commit moves:
- CONFIG_OF_CONTROL
- SPL_DISABLE_OF_CONTROL
from zynq_*_defconfig files into arch/arm/Kconfig "config ARCH_ZYNQ"
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Jagan Teki [Mon, 29 Jun 2015 08:46:30 +0000 (14:16 +0530)]
defconfig: Add CONFIG_OF_CONTROL in zynq_picozed
Enable FDT support for zynq_picozed board.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:38 +0000 (00:51 +0530)]
spi: Kconfig: Add Zynq SPI controller entry
Add Zynq SPI controller Kconfig entry.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Marek Vasut <marex@denx.de>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:37 +0000 (00:51 +0530)]
spi: xilinx_spi: Add asm/io.h include file
This patch includes asm/io.h for readl and writel calls.
build errors:
drivers/spi/xilinx_spi.c: In function 'xilinx_spi_probe':
drivers/spi/xilinx_spi.c:119:2: warning: implicit declaration of function 'writel' [-Wimplicit-function-declaration]
drivers/spi/xilinx_spi.c: In function 'xilinx_spi_xfer':
drivers/spi/xilinx_spi.c:193:2: warning: implicit declaration of function 'readl' [-Wimplicit-function-declaration]
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Jagan Teki [Mon, 29 Jun 2015 07:45:18 +0000 (13:15 +0530)]
dm: spi: xilinx_spi: Convert to driver model
This converts the xilinx spi driver to use the driver model.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:35 +0000 (00:51 +0530)]
dts: zynq: Enable spi1 for zc770_xm010 board
This patch enables spi1 for zynq zc770_xm010 board dts
Signed-off-by: Jagan Teki <jteki@openedev.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:34 +0000 (00:51 +0530)]
spi: zynq_spi: Add fdt support in driver
Now zynq spi driver platform data is controlled by devicetree,
enable the status by saying "okay" on respective board dts to use
the devicetree generated platdata.
Ex:
&spi1 {
status = "okay";
};
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:33 +0000 (00:51 +0530)]
dts: zynq: Add zynq spi controller nodes
This patch adds zynq spi controller nodes in zynq-7000.dtsi.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:32 +0000 (00:51 +0530)]
zynq: Kconfig: Enable dm spi and spi_flash
Enabled CONFIG_DM_SPI and CONFIG_DM_SPI_FLASH for zynq soc.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:31 +0000 (00:51 +0530)]
dm: spi: zynq_spi: Convert to driver model
This converts the zynq spi driver to use the driver model.
Minimal functional changes like using meaningful name on
structure members wrt mainlined dm spi drivers.
- input_hz -> frequency
- req_hz -> freq
- base -> regs
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Tested-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:30 +0000 (00:51 +0530)]
spi/sf: Minor cleanups
- Adjust tab spaces
- Add comments
Signed-off-by: Jagan Teki <jteki@openedev.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:29 +0000 (00:51 +0530)]
spi: davinci_spi: Driver cleanup
Arrange driver code in more readable format[1] for easy accessing
and readable.
[1] http://patchwork.ozlabs.org/patch/265683/
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Rex Chang <rchang@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:28 +0000 (00:51 +0530)]
spi: davinci_spi: Move header code to driver
Move the header code into driver for more readable and
easy to access it.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Rex Chang <rchang@ti.com>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:27 +0000 (00:51 +0530)]
spi: xilinx_spi: Driver clean-up
- Zap unneeded macros
- Re-arrange the code
- Removed __attribute__((weak))
- Replace __func__ macro with func names to save macro transition.
- Re-arranged comment lines.
- Arrange driver code in more readable format[1]
[1] http://patchwork.ozlabs.org/patch/265683/
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:26 +0000 (00:51 +0530)]
spi: xilinx_spi: Move header code to driver
Move the header code into driver for more readable and
easy to access it.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:25 +0000 (00:51 +0530)]
spi: Zap oc_tiny_spi driver
Zap oc_tiny_spi driver since the boards used this driver
is no longer been active.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Thomas Chou <thomas@wytron.com.tw>
Jagan Teki [Fri, 26 Jun 2015 19:21:24 +0000 (00:51 +0530)]
spi: Zap ftssp010_spi driver
Zap ftssp010_spi driver since the boards used this driver
is no longer been active.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Kuo-Jung Su <dantesu@faraday-tech.com>
Cc: Axel Lin <axel.lin@ingics.com>
Jagan Teki [Fri, 26 Jun 2015 19:21:23 +0000 (00:51 +0530)]
spi: Zap andes_spi driver
Zap andes_spi driver since the boards used this driver
is no longer been active.
Signed-off-by: Jagan Teki <jteki@openedev.com>
Cc: Macpaul Lin <macpaul@andestech.com>
Alexey Brodkin [Wed, 1 Jul 2015 13:47:42 +0000 (16:47 +0300)]
board: axs103 - add maintainer information
Looks like I forgot to add myself as a maintainer for AXS103 defconfig.
Fixing this now.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Tom Rini <trini@konsulko.com>
Alexey Brodkin [Mon, 18 May 2015 13:56:26 +0000 (16:56 +0300)]
arc: significant cache rework
[1] Align cache management functions to those in Linux kernel. I.e.:
a) Use the same functions for all cache ops (D$ Inv/Flush)
b) Split cache ops in 3 sub-functions: "before", "lineloop" and
"after". That way we may re-use "before" and "after" functions for
region and full cache ops.
[2] Implement full-functional L2 (SLC) management. Before SLC was
simply disabled early on boot. It's also possible to enable or disable
L2 cache from config utility.
[3] Disable/enable corresponding caches early on boot. So if U-Boot is
configured to use caches they will be used at all times (this is useful
in partucular for speed-up of relocation).
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Alexey Brodkin [Mon, 13 Apr 2015 10:37:05 +0000 (13:37 +0300)]
arc: implement slave cores kick-start for Linux kernel
With new SMP-enabled CPUs with ARC HS38 cores and corresponding support
in Linux kernel it's required to add basic SMP support in U-Boot.
Currently we assume the one and only core starts execution after
power-on. So most of things in U-Boot is handled in UP mode.
But when U-Boot is used for loading and starting Linux kernel right
before jumping to kernel's entry point U-Boot:
[1] Sets all slave cores to jump to the same address [kernel's entry
point]
[2] Really starts all slav cores
In ARC's implemetation of SMP in Linux kernel all cores are supposed to
run the same start-up code. But only core with ID 0 (master core)
processes further while others are looping waiting for master core to
complete some initialization.
That means it's safe to un-pause slave cores and let them execute kernel
- they will wait for master anyway.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Tom Rini [Mon, 29 Jun 2015 21:22:01 +0000 (17:22 -0400)]
Prepare v2015.07-rc3
Signed-off-by: Tom Rini <trini@konsulko.com>
Haikun Wang [Mon, 29 Jun 2015 09:15:52 +0000 (17:15 +0800)]
sf: update sst25wf040b flash params
sst25wf040b doesn't support Auto Address Increment Programming command.
Remove SST_WR flag.
Signed-off-by: Haikun Wang <B53464@freescale.com>
Tested-by: Haikun Wang <haikun.wang@freescale.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
Heiko Schocher [Mon, 27 Apr 2015 05:42:07 +0000 (07:42 +0200)]
mtd, spi: Check if flash pointer is used
If flash pointer is used free it, before probing a new
flash and storing it in flash.
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
Heiko Schocher [Mon, 27 Apr 2015 05:42:06 +0000 (07:42 +0200)]
spi, sf: Use offset and size in sf cmd from mtdpartition
With this patch, it is possible to get the offset and size information
from the mtdpartiton setting in "mtdparts", similiar to the
"nand" commandos.
=> sf
sf - SPI flash sub-system
Usage:
sf probe [[bus:]cs] [hz] [mode] - init flash device on given SPI bus
and chip select
sf read addr offset|partition len - read `len' bytes starting at
`offset' to memory at `addr'
sf write addr offset|partition len - write `len' bytes from memory
at `addr' to flash at `offset'
sf erase offset|partition [+]len - erase `len' bytes from `offset'
`+len' round up `len' to block size
sf update addr offset|partition len - erase and write `len' bytes from memory
at `addr' to flash at `offset'
=>
for example "env" is defined in mtdparts:
=> sf read
13000000 env
device 0 offset 0xd0000, size 0x10000
SF: 65536 bytes @ 0xd0000 Read: OK
zynq-uboot> mtdparts add nor0 0x10000@0x0 env
zynq-uboot> sf erase env 0x10000
SF: 65536 bytes @ 0x0 Erased: OK
zynq-uboot> sf write 0x100 env
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Written: OK
zynq-uboot> sf read 0x40000 env
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Read: OK
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
Heiko Schocher [Mon, 27 Apr 2015 05:42:05 +0000 (07:42 +0200)]
mtd, nand: Move common functions from cmd_nand.c to common place
Move common functions from cmd_nand.c (for calculating offset
and size from cmdline paramter) to common place, so they could
used from other commands which use mtd partitions.
For onenand the arg_off_size() is left in common/cmd_onenand.c.
It should use now the common arg_off() function, but as I could
not test onenand I let it there ...
Signed-off-by: Heiko Schocher <hs@denx.de>
Acked-by: Scott Wood <scottwood@freescale.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
Daniel Schwierzeck [Mon, 27 Apr 2015 05:42:04 +0000 (07:42 +0200)]
mtd, spi: Add MTD layer driver
Add MTD layer driver for spi, original patch from:
http://git.denx.de/?p=u-boot/u-boot-mips.git;a=commitdiff;h=
bb246819cdc90493dd7089eaa51b9e639765cced
Changes from Heiko Schocher against this patch:
- Remove compile error if not defining CONFIG_SPI_FLASH_MTD:
LD drivers/mtd/spi/built-in.o
drivers/mtd/spi/sf_probe.o: In function `spi_flash_mtd_unregister':
/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
drivers/mtd/spi/sf_ops.o: In function `spi_flash_mtd_unregister':
/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: multiple definition of `spi_flash_mtd_unregister'
drivers/mtd/spi/sf_params.o:/home/hs/abb/imx6/u-boot/drivers/mtd/spi/sf_internal.h:168: first defined here
make[1]: *** [drivers/mtd/spi/built-in.o] Fehler 1
make: *** [drivers/mtd/spi] Fehler 2
- Add a README entry.
- Add correct writebufsize, to fit with Linux v3.14
MTD, UBI/UBIFS sync.
Note (From Jagan): For testing raw mtd parition erase/read/write operations
using cmd_sf, sf_mtd should be required to register the spi flash device to
MTD layer but the sf_mtd_info ops were not required until and unless if we
use any flash filesystem layer say for example UBI. Due to this the foot-print
got increased ~290bytes in non-UBI case here that should be acceptible.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
Tested-by: Jagannadh Teki <jteki@openedev.com>
Reviewed-by: Jagannadh Teki <jteki@openedev.com>
Haikun Wang [Sat, 27 Jun 2015 16:21:05 +0000 (21:51 +0530)]
defconfig: ls1021a: Add OF_CONTROL and DM support
PI and QSPI only work when boot from QSPI on ls1021a.
This patch only enable options in qspi boot defconfig.
Signed-off-by: Haikun Wang <haikun.wang@freescale.com>
Tested-by: Haikun Wang <haikun.wang@freescale.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
Haikun Wang [Sat, 27 Jun 2015 16:16:13 +0000 (21:46 +0530)]
arm: ls102xa: Enable Driver Model SPI for ls1021atwr
Enable Driver Model SPI for ls1021atwr board.
DSPI and QSPI only be enabled when boot from QSPI.
DSPI and QSPI are compatible under Driver Model SPI.
Signed-off-by: Haikun Wang <Haikun.Wang@freescale.com>
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Tested-by: Haikun Wang <haikun.wang@freescale.com>
Reviewed-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>
projects / oweals / u-boot.git / log