Wolfgang Denk [Sun, 12 Aug 2007 16:28:18 +0000 (18:28 +0200)]
Cleanup output on ADS5121 board
Signed-off-by: Wolfgang Denk
Wolfgang Denk [Sun, 12 Aug 2007 16:12:38 +0000 (18:12 +0200)]
Merge ... git+ssh://gemini_vpn/home/wd/git/u-boot/master
Wolfgang Denk [Sun, 12 Aug 2007 13:11:38 +0000 (15:11 +0200)]
Adapt board configuration and fix kernel crash on MCC200 board.
The update procedure was modified to turn off the USB subsystem
before exit for MCC200 and TRAB. This is necessary as otherwise the
USB controller continues to write periodically to system memory!
MCC200-specific notes:
- the patch disables the magic key check for MCC200
- the patch contains the configuration changes made
for the new revision of the board.
Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 12 Aug 2007 12:47:54 +0000 (14:47 +0200)]
Adjust default configuration of ADS5121 board.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 12 Aug 2007 12:27:39 +0000 (14:27 +0200)]
Clean up some remaining CFG_CMD_ -> CONFIG_CMD_ issues.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sat, 11 Aug 2007 00:14:05 +0000 (02:14 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-fdt
Gerald Van Baren [Wed, 8 Aug 2007 01:14:22 +0000 (21:14 -0400)]
Improve error print messages.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Kim Phillips [Tue, 17 Jul 2007 18:57:04 +0000 (13:57 -0500)]
fdt: allow for builds that don't want env and bd_t nodes
protect fdt_env and fdt_bd_t invocations, fix codingstyle while in the
area.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Tue, 17 Jul 2007 18:56:53 +0000 (13:56 -0500)]
fdt: do board setup based on fdt address specified on bootm line
The last fdt patch to bootm did board setup based on the address
specified by a prior fdt address command invocation. The bootm
code, as its call to fdt_chosen does, should use the fdt specified
by the user on the bootm command. Note this restores full
functionality for the 8360's existing default boot environment
values, e.g. 'run nfsboot' (i.e. no having to 'fdt addr $fdtaddr'
before booting a kernel).
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Gerald Van Baren [Wed, 11 Jul 2007 00:40:39 +0000 (20:40 -0400)]
Call ft_board_setup() from the bootm command.
In the patch titled "Create new fdt boardsetup command..." I removed the
call to ft_board_setup() from the routine fdt_chosen(), but I forgot
to add a direct call back into cmd_bootm.c
This fixes the oversight by adding the direct call to the bootm command.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Tue, 26 Jun 2007 03:25:28 +0000 (23:25 -0400)]
Create new fdt boardsetup command, fix bug parsing [] form of set values.
Previously ft_board_setup() was called by fdt_chosen() which was not
really correctly structured. This splits ft_board_setup() out by creating
a new fdt boardsetup command.
Fix a bug when parsing fdt set command values which have the square
bracket form [00 11 22 33] - the length was updated incorrectly in when
parsing that form.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Tue, 26 Jun 2007 00:55:58 +0000 (20:55 -0400)]
Tighten up the error messages.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Mon, 25 Jun 2007 23:52:23 +0000 (19:52 -0400)]
Asthetic improvements: error messages and line lengths.
Tighten up the error messages, split overlength lines.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Sat, 26 May 2007 02:08:57 +0000 (22:08 -0400)]
Fix fdt_chosen() to call ft_board_setup(), clean up long lines.
The fdt_chosen() function was adding/seting some properties ad-hoc
improperly and duplicated (poorly) what was done in ft_board_setup()
Clean up long lines (setting properties, printing errors).
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Tue, 22 May 2007 03:27:16 +0000 (23:27 -0400)]
For fdt_find_node_by_path(), handle the root path properly.
Also removes the special case root path detection in cmd_fdt.c since it
is no longer necessary.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Fri, 18 May 2007 03:54:36 +0000 (23:54 -0400)]
Add fdt_find_node_by_type() and fdt_find_compatible_node() to LIBFDT
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Thu, 7 Jun 2007 02:47:58 +0000 (22:47 -0400)]
Replace fdt_node_offset() with fdt_find_node_by_path().
The new name matches more closely the kernel's name, which is also
a much better description.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Thu, 17 May 2007 02:39:59 +0000 (22:39 -0400)]
Fix cmd_fdt line lengths, refactor code.
Break lines that were greater than 80 characters in length.
Move the fdt print and property parsing code to separate static functions
to reduce coding clutter in the fdt_cmd handling body.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Sat, 12 May 2007 13:47:25 +0000 (09:47 -0400)]
FDT command improvements.
Fix "fdt set" so that it will create a non-existing property.
Add "fdt mknode" to create nodes.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Sat, 12 May 2007 13:45:46 +0000 (09:45 -0400)]
Reorganize and fix problems (returns) in the bootm command.
Do *NOT* return after the "point of no return" has been passed.
If something goes wrong, the board must be reset after that point.
Move the "Transferring control to Linux" debug message back to where it
belongs: just before transferring control to linux.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Wed, 9 May 2007 01:27:35 +0000 (21:27 -0400)]
Fix bugs in the CONFIG_OF_LIBFDT
Stupid coding mistakes (identified by Timur Tabi, thanks).
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Thu, 26 Apr 2007 02:47:15 +0000 (22:47 -0400)]
Improve fdt move length handling.
Make the length parameter optional: if not specified, do the move using
the current size unchanged.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Thu, 26 Apr 2007 02:23:36 +0000 (22:23 -0400)]
Minor code clean up.
Declare the variable fdt properly as extern.
Call the "set_fn" function pointer the "short way" without the full
dereferencing syntax.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Thu, 26 Apr 2007 01:24:27 +0000 (21:24 -0400)]
Improve error messages, more informative.
Print more than the raw libfdt error message strings. This is especially
useful for cluing in the user when the bootm command aborts due to
blob problems.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Sat, 21 Apr 2007 02:46:53 +0000 (22:46 -0400)]
libfdt: Conditionally compile based on CONFIG_OF_LIBFDT
This is the way u-boot reduces configured-out code. At Wolfgang
Grandegger and Wolfgang Denk's request, make libfdt conform.
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Gerald Van Baren [Fri, 10 Aug 2007 23:19:50 +0000 (19:19 -0400)]
Merge git://www.denx.de/git/u-boot
Bruce Adler [Fri, 10 Aug 2007 21:54:47 +0000 (14:54 -0700)]
add image size and descriptors for Spartan 3E FPGA chips
Spartan 3E image sizes taken from Table 1-4 in Xilinx UG332 (v1.1)
Signed-off by: Bruce Adler <bruce.adler@ccpu.com>
Kim Phillips [Fri, 10 Aug 2007 20:34:48 +0000 (15:34 -0500)]
make MAKEALL more immune to merge conflicts
..by placing board entries one per line, as suggested by jdl.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Fri, 10 Aug 2007 18:28:25 +0000 (13:28 -0500)]
README: Remove outdated cpu type, board type, and NAME_config lists
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Fri, 10 Aug 2007 07:48:59 +0000 (15:48 +0800)]
mpc83xx: Suppress the warning 'burstlen'
suppress the warning 'burstlen' of spd_sdram.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Stefan Roese [Fri, 10 Aug 2007 18:38:35 +0000 (20:38 +0200)]
Merge ... git+ssh://sr@pollux.denx.org/home/wd/git/u-boot/from_stefan
Stefan Roese [Fri, 10 Aug 2007 18:34:58 +0000 (20:34 +0200)]
Conding style cleanup
Signed-off-by: Stefan Roese <sr@denx.de>
Stefan Roese [Fri, 10 Aug 2007 18:33:06 +0000 (20:33 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Sergey Kubushyn [Fri, 10 Aug 2007 18:26:18 +0000 (20:26 +0200)]
[ARM] TI DaVinci support, hopefully final
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA
Changes:
- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
DV_EVM. Can't check if it works on SONATA, don't have a board any more,
but it at least compiles.
Here is an excerpt from session log on SCHMOOGIE...
U-Boot
1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17)
DRAM: 128 MB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >
Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
Wolfgang Denk [Fri, 10 Aug 2007 08:35:10 +0000 (10:35 +0200)]
Merge ... git+ssh://atlas/home/wd/git/u-boot/master
Wolfgang Denk [Fri, 10 Aug 2007 08:34:10 +0000 (10:34 +0200)]
Merge with /home/wd/git/u-boot/work
Dirk Behme [Thu, 2 Aug 2007 15:42:08 +0000 (17:42 +0200)]
Make use of generic 64bit division in nand_util.c
Use generic 64bit division in nand_util.c. This makes nand_util.c
independent of any toolchain 64bit division.
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Dirk Behme [Thu, 2 Aug 2007 15:41:14 +0000 (17:41 +0200)]
Move 64bit division from avr32 to generic lib
Move the 64bit division from lib_avr32 to lib_generic. With this, all
boards can do_div/__div64_32 if needed, not only avr one. Code is put
to lib_generic, so no larger memory footprint if not used. No code
modifications. Thanks for proposal by Håvard Skinnemoen.
Signed-off-by: Dirk Behme <dirk.behme@gmail.com>
Kim Phillips [Mon, 6 Aug 2007 23:18:34 +0000 (18:18 -0500)]
mpc83xx: fix ITX[GP] O=builddir builds
make: *** No rule to make target `/work/wd/tmp/board/mpc8349itx/u-boot.lds', needed by `/work/wd/tmp/u-boot'. Stop.
Both the ITX and ITX-GP fail when you use "make O=<some dir> ..." or
"BUILD_DIR=<some dir> ./MAKEALL ..."
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Wed, 1 Aug 2007 07:00:59 +0000 (15:00 +0800)]
mpc83xx: Correct the README for DDR ECC
Update the README for DDR ECC, change the name
to README.mpc83xx.ddrecc.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Wed, 1 Aug 2007 07:00:15 +0000 (15:00 +0800)]
mpc83xx: Consolidate the ECC support of 83xx
Remove the duplicated source code of ecc command on the <board>.c,
for reused, move these code to cpu/mpc83xx directory.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Sat, 4 Aug 2007 05:37:39 +0000 (13:37 +0800)]
mpc83xx: Correct the burst length for DDR2 with 32 bits
The burst length should be 4 for DDR2 with 32 bits bus
Signed-off-by: Dave Liu <daveliu@freescale.com>
Kim Phillips [Thu, 26 Jul 2007 00:25:33 +0000 (19:25 -0500)]
mpc83xx: add support for the MPC8323E RDB
MPC8323E based board with 64MB fixed SDRAM, 16MB flash,
five 10/100 ethernet ports connected via an ICPlus IP175C
switch, one PCI slot, and serial. Features not supported
in this patch are SD card interface, 2 USB ports, and the
two phone ports.
Signed-off-by: Michael Barkowski <michael.barkowski@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Thu, 26 Jul 2007 00:25:28 +0000 (19:25 -0500)]
mpc83xx: fixup generic pci for libfdt
add libfdt support to the generic 83xx pci code
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Kim Phillips [Thu, 26 Jul 2007 00:25:22 +0000 (19:25 -0500)]
mpc83xx: fix 8360 and cpu functions to update fdt being passed
..and not the global fdt. Rename local fdt vars to blob so as not to
be confused with the global var with the same three-letter name.
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jerry Van Baren [Thu, 5 Jul 2007 01:34:24 +0000 (21:34 -0400)]
mpc83xx: Fix errors when CONFIG_OF_LIBFDT is enabled
Several node strings were not correct (trailing slashes and properties
in the strings)
Added setting of the timebase-frequency.
Improved error messages and use debug() instead of printf().
Signed-off-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Jerry Van Baren [Thu, 5 Jul 2007 01:27:30 +0000 (21:27 -0400)]
mpc83xx: Replace fdt_node_offset() with fdt_find_node_by_path().
The new name matches more closely the kernel's name, which is also
a much better description.
These are the mpc83xx changes made necessary by the function name change.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Mon, 25 Jun 2007 02:41:56 +0000 (10:41 +0800)]
mpc83xx: Add support for the display of reset status
83xx processor family has many reset sources, such as
power on reset, software hard reset, software soft reset,
JTAG, bus monitor, software watchdog, check stop reset,
external hard reset, external software reset.
sometimes, to figure out the fault of system, we need to
know the cause of reset early before the prompt of
u-boot present.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Mon, 25 Jun 2007 02:41:04 +0000 (10:41 +0800)]
mpc83xx: Fix the align bug of SDMA buffer
According to the latest user manual, the SDMA temporary
buffer base address must be 4KB aligned.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Dave Liu [Mon, 25 Jun 2007 05:21:12 +0000 (13:21 +0800)]
mpc83xx: Revise the MPC8360EMDS readme doc
When the rev2.x silicon mount on the MPC8360EMDS baord,
and if you are using the u-boot version after the commit
3fc0bd159103b536e1c54c6f4457a09b3aba66ca.
to make the ethernet interface usable, we have to setup
the jumpers correctly.
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Timur Tabi [Tue, 3 Jul 2007 18:46:32 +0000 (13:46 -0500)]
FSL I2C driver programs the two I2C busses differently
The i2c_init() function in fsl_i2c.c programs the two I2C busses differently.
The second I2C bus has its slave address programmed incorrectly and is
missing a 5-us delay.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Timur Tabi [Tue, 3 Jul 2007 18:04:34 +0000 (13:04 -0500)]
Update SCCR programming in cpu_init_f() to support all 83xx processors
Update the cpu_init_f() function in cpu/mpc83xx/cpu_init.c to program the
bitfields for all 83xx processors. The code to update some bitfields was
compiled only on some processors. Now, the bitfields are programmed as long
as the corresponding CFG_SCCR option is defined in the board header file.
This means that the board header file should not define any CFG_SCCR macros
for bitfields that don't exist on that processor, otherwise the SCCR will be
programmed incorrectly.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Martin Krause [Fri, 22 Jun 2007 11:04:22 +0000 (13:04 +0200)]
TQM834x: cleanup configuraton
Remove irritating #undef DEBUG
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
david.saada [Mon, 18 Jun 2007 16:09:53 +0000 (09:09 -0700)]
MPC83xx: Fix makefile to generate config.h file in the build directory
MPC83xx: Fix the Makefile config sections to generate the include/config.h
file in the build directory instead of the source directory.
Signed-off-by: David Saada <david.saada@ecitele.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Lee Nipper [Fri, 15 Jun 2007 01:07:33 +0000 (20:07 -0500)]
mpc83xx: Add support for 8360 silicon revision 2.1
This change adds 8360 silicon revision 2.1 support to u-boot.
Signed-off-by: Lee Nipper <lee.nipper@freescale.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Wolfgang Denk [Thu, 9 Aug 2007 21:49:30 +0000 (23:49 +0200)]
Merge ... git+ssh://atlas/home/wd/git/u-boot/master
Wolfgang Denk [Thu, 9 Aug 2007 21:47:43 +0000 (23:47 +0200)]
Merge with /home/wd/git/u-boot/work
Kumar Gala [Wed, 8 Aug 2007 09:14:28 +0000 (04:14 -0500)]
Treat ppc64 host as ppc
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Jason Jin [Wed, 8 Aug 2007 01:01:46 +0000 (09:01 +0800)]
Minor fix for bios emulator makefile
Add $(obj) to LIB avoiding objects be built in the source dir
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Jason Jin [Wed, 8 Aug 2007 00:33:11 +0000 (08:33 +0800)]
Add CONFIG_BIOSEMU define to guard all the bios emulator code
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
This patch fix the compile issue on the board that did not enable the bios emulator
Wolfgang Denk [Thu, 9 Aug 2007 21:17:32 +0000 (23:17 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-usb
Zach Sadecki [Tue, 31 Jul 2007 17:27:25 +0000 (12:27 -0500)]
tsec: fix multiple PHY support
The change entitled "Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx"
broke multiple PHY support in tsec.c. This fixes it.
Signed-off-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>
Wolfgang Denk [Thu, 9 Aug 2007 20:38:39 +0000 (22:38 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc83xx
Wolfgang Denk [Thu, 9 Aug 2007 20:11:03 +0000 (22:11 +0200)]
Merge with /home/wd/git/u-boot/work
Joe Hamman [Thu, 9 Aug 2007 14:08:18 +0000 (09:08 -0500)]
tsec: Allow Ten Bit Interface address to be configurable
Allow the address of the Ten Bit Interface (TBI) to be changed in the
event of a conflict with another device.
Signed-off by: Joe Hamman <joe.hamman@embeddedspecialties.com>
Gerald Van Baren [Wed, 8 Aug 2007 01:33:33 +0000 (21:33 -0400)]
Merge git://www.denx.de/git/u-boot
Markus Klotzbuecher [Tue, 7 Aug 2007 20:30:29 +0000 (22:30 +0200)]
Merge with git://www.denx.de/git/u-boot.git
Wolfgang Denk [Tue, 7 Aug 2007 15:04:30 +0000 (17:04 +0200)]
Merge with /home/tur/git/u-boot#cm5200-si
Jason Jin [Tue, 7 Aug 2007 08:17:06 +0000 (16:17 +0800)]
Add CONFIG_BIOSEMU define to guard all the bios emulator code
This patch fix the compile issue on the board that did not enable the bios emulator
Wolfgang Denk [Tue, 7 Aug 2007 14:02:13 +0000 (16:02 +0200)]
Fix missing brace error in fs/fat/fat.c
[pointed out by Roderik Wildenburg]
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 6 Aug 2007 21:21:05 +0000 (23:21 +0200)]
Fixed typo in README (pointed out by Martin Jost).
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Mon, 6 Aug 2007 13:59:45 +0000 (15:59 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-testing
Wolfgang Denk [Mon, 6 Aug 2007 00:17:36 +0000 (02:17 +0200)]
Coding style cleanup. Update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Jason Jin [Tue, 10 Jul 2007 01:03:22 +0000 (09:03 +0800)]
Remove the bios emulator from MAI board.
The bios emulator in the MAI board can not pass compile
and have a lot of crap in it. remove it and will have a
clean and small bios emulator in the drivers directory
which can be uesed for every board.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Jason Jin [Fri, 13 Jul 2007 04:14:59 +0000 (12:14 +0800)]
Fix some compile issues for MAI board.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Jason Jin [Fri, 13 Jul 2007 04:14:58 +0000 (12:14 +0800)]
Configurations for ATI video card BIOS emulator
This patch add definition of the BIOS emulator and the ATI framebuffer
driver for MPC8641HPCN board.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Jason Jin [Fri, 6 Jul 2007 00:34:56 +0000 (08:34 +0800)]
This is a BIOS emulator, porting from SciTech for u-boot, mainly for
ATI video card BIOS. and can be used for x86 code emulation by some
modifications.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Jason Jin [Fri, 6 Jul 2007 00:33:33 +0000 (08:33 +0800)]
This is a framebuffer driver for ATI video card, can work for PCI9200,
X300, X700, X800 ATI video cards.
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Wolfgang Denk [Sun, 5 Aug 2007 23:11:08 +0000 (01:11 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-testing
Wolfgang Denk [Sun, 5 Aug 2007 23:01:49 +0000 (01:01 +0200)]
Coding style cleanup. Update CHANGELOG.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Sun, 5 Aug 2007 22:55:51 +0000 (00:55 +0200)]
Merge ... /home/wd/git/u-boot/custodian/u-boot-mpc85xx
Martin Krause [Tue, 12 Dec 2006 13:26:01 +0000 (14:26 +0100)]
Add functions to list of exported functions
Additionally export the following fuctions (to make trab_config build again):
- simple_strtol()
- strcmp()
Also bump the ABI version to reflect this change
Signed-off-by: Martin Krause <martin.krause@tqs.de>
Ed Swarthout [Thu, 2 Aug 2007 19:09:49 +0000 (14:09 -0500)]
Make MPC8641's PCI/PCI-E driver a common driver for many FSL parts.
All of the PCI/PCI-Express driver and initialization code that
was in the MPC8641HPCN port has now been moved into the common
drivers/fsl_pci_init.c. In a subsequent patch, this will be
utilized by the 85xx ports as well.
Common PCI-E IMMAP register blocks for FSL 85xx/86xx are added.
Also enable the second PCI-Express controller on 8641
by getting its BATS and CFG_ setup right.
Fixed a u16 vendor compiler warning in AHCI driver too.
Signed-off-by: Ed Swarthout <Ed.Swarthout@freescale.com>
Signed-off-by: Zhang Wei <wei.zhang@freescale.com>
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Bartlomiej Sieka [Fri, 3 Aug 2007 10:08:16 +0000 (12:08 +0200)]
cm1_qp1 -> cm5200: single U-Boot image for modules from the cm5200 family.
Add the ability for modules from the Schindler cm5200 family to use a
single U-Boot image:
- rename cm1_qp1 to cm5200
- add run-time module detection
- parametrize SDRAM configuration according to the module we are running on
Few minor, board-specific fixes included in this patch:
- better MAC address handling
- updated default environment ('update' command uses +{filesize} now)
- improved error messages in the auto-update code
- allow booting U-Boot from RAM (CFG_RAMBOOT)
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Piotr Kruszynski <ppk@semihalf.com>
Signed-off-by: Bartlomiej Sieka <tur@semihalf.com>
Andy Fleming [Fri, 3 Aug 2007 09:05:25 +0000 (04:05 -0500)]
Add Marvell 1149 PHY support to the TSEC
Andy Fleming [Fri, 3 Aug 2007 07:23:23 +0000 (02:23 -0500)]
Merge branch 'testing' into working
Conflicts:
CHANGELOG
fs/fat/fat.c
include/configs/MPC8560ADS.h
include/configs/pcs440ep.h
net/eth.c
Wolfgang Denk [Thu, 2 Aug 2007 19:27:46 +0000 (21:27 +0200)]
Coding style cleanup, update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Thu, 2 Aug 2007 08:11:18 +0000 (10:11 +0200)]
Minor cleanup of <board>_nand build rules.
Wolfgang Denk [Wed, 1 Aug 2007 22:48:45 +0000 (00:48 +0200)]
Fix build errors and warnings / code cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Rafal Jaworowski [Fri, 27 Jul 2007 12:43:59 +0000 (14:43 +0200)]
[ADS5121] Support for the ADS5121 board
The following MPC5121e subsystems are supported:
- low-level CPU init
- NOR Boot Flash (common CFI driver)
- DDR SDRAM
- FEC
- I2C
- Watchdog
Signed-off-by: Grzegorz Bernacki <gjb@semihalf.com>
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Signed-off-by: Jan Wrobel <wrr@semihalf.com>
Rafal Jaworowski [Fri, 27 Jul 2007 12:22:04 +0000 (14:22 +0200)]
[PPC] Remove unused MSR_USER definition
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Rafal Jaworowski [Thu, 19 Jul 2007 15:12:28 +0000 (17:12 +0200)]
Fix breakage of 8xx boards from recent commit.
This patch fixes the negative consequences for 8xx of the recent
"ppc4xx: Clean up 440 exceptions handling" commit.
Signed-off-by: Rafal Jaworowski <raj@semihalf.com>
Wolfgang Denk [Sat, 14 Jul 2007 20:51:02 +0000 (22:51 +0200)]
Update CHANGELOG
Signed-off-by: Wolfgang Denk <wd@denx.de>
Heiko Schocher [Fri, 13 Jul 2007 23:07:51 +0000 (01:07 +0200)]
Merge with /home/hs/Atronic/u-boot-dev-new
Heiko Schocher [Fri, 13 Jul 2007 23:06:58 +0000 (01:06 +0200)]
[PCS440EP] - fix compile error, if BUILD_DIR is used
Heiko Schocher [Fri, 13 Jul 2007 07:54:17 +0000 (09:54 +0200)]
make show_boot_progress () weak.
Signed-off-by: Heiko Schocher <hs@denx.de>
Heiko Schocher [Fri, 13 Jul 2007 06:26:05 +0000 (08:26 +0200)]
[PCS440EP] - The DIAG LEDs are now blinking, if an error occur
- fix compile error, if BUILD_DIR is used
Signed-off-by: Heiko Schocher <hs@denx.de>
Wolfgang Denk [Wed, 11 Jul 2007 23:45:34 +0000 (01:45 +0200)]
Update CHANGELOG, minor coding style cleanup.
Signed-off-by: Wolfgang Denk <wd@denx.de>
Wolfgang Denk [Wed, 11 Jul 2007 23:42:41 +0000 (01:42 +0200)]
Merge with /home/tur/git/u-boot#cm1_qp1
Andy Fleming [Fri, 8 Jun 2007 21:41:18 +0000 (16:41 -0500)]
Remove erroneous errata code from Marvel 88E1111S driver
The Marvel 88E1111S driver for the TSEC was copied from the
88E1101 driver, and included a fix for an erratum which does not
exist on that part. Now it is removed
Signed-off-by: Andy Fleming <afleming@freescale.com>
projects / oweals / u-boot.git / log