Florian Eckert [Tue, 25 Sep 2018 09:37:39 +0000 (11:37 +0200)]
luci-theme-material: fix whitspaces and change mode
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Jo-Philipp Wich [Tue, 25 Sep 2018 05:32:50 +0000 (07:32 +0200)]
Merge pull request #2177 from TDT-AG/pr/
20180924-luci-mod-network
luci-mod-network: disable wifi config on new wifi-iface add
Jo-Philipp Wich [Mon, 24 Sep 2018 16:08:46 +0000 (18:08 +0200)]
Merge pull request #2179 from remakeelectric/mos-path-vs-file
luci-app-mosquitto: validate paths as path, not file
Karl Palsson [Mon, 24 Sep 2018 16:00:52 +0000 (16:00 +0000)]
luci-app-mosquitto: validate paths as path, not file
luci has separate validation for directories and files, make sure to
use the right one.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Jo-Philipp Wich [Mon, 24 Sep 2018 12:12:23 +0000 (14:12 +0200)]
Merge pull request #2178 from booo/fix/profile_berlin-mesh_network
community-profiles: change subnet of mesh_network option for Berlin
Philipp Borgers [Mon, 24 Sep 2018 11:43:51 +0000 (13:43 +0200)]
community-profiles: change subnet of mesh_network option for Berlin
The mesh_network option is used to check the user input. The wizard
checks if the input ip address is part of the mesh_network. We use
multiple /16 networks. There is no support for multiple ranges so we the
10.0.0.0/8.
For reference the ip list:
https://wiki.freifunk.net/IP-Netze
Signed-off-by: Philipp Borgers <borgers@mi.fu-berlin.de>
Florian Eckert [Mon, 16 Jul 2018 12:39:55 +0000 (14:39 +0200)]
luci-mod-network: disable setup on new wifi-iface add
If we add a new wifi-iface to the config then the iface will start at once.
But normaly we would configure the wireless security in the next step.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Jo-Philipp Wich [Fri, 21 Sep 2018 06:40:00 +0000 (08:40 +0200)]
Merge pull request #2169 from luizluca/pt-br-update
i18n: update pt-br translation
Luiz Angelo Daros de Luca [Fri, 21 Sep 2018 00:58:33 +0000 (21:58 -0300)]
i18n: update pt-br translation
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Jo-Philipp Wich [Thu, 20 Sep 2018 10:41:13 +0000 (12:41 +0200)]
Merge pull request #2168 from remakeelectric/app-snmpd
luci-app-snmpd: Basic net-snmpd config options
Karl Palsson [Thu, 20 Sep 2018 10:36:34 +0000 (10:36 +0000)]
luci-app-snmpd: Basic net-snmpd config options
Imported from https://github.com/remakeelectric/owrt_pub_feeds/tree/master/luci-app-snmpd
Only provides configuration of basic authentication and system level
options, not even close to the entire slew of options that net-snmp
supports, but the basics are still helpful, and a base for future work.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Jo-Philipp Wich [Thu, 20 Sep 2018 07:39:51 +0000 (09:39 +0200)]
Merge pull request #2167 from YuriPet/master
luci-base: update Ukrainian translation
Jo-Philipp Wich [Thu, 20 Sep 2018 00:41:15 +0000 (03:41 +0300)]
luci-mod-status: fix querying IPv6 address
Correct a typo that prevents displaying the interface IPv6 address in
some cases.
Fixes: #2166
Reported-by: Vladislav Grigoryev <20725816+vgaetera@users.noreply.github.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Yurii [Thu, 20 Sep 2018 00:45:22 +0000 (03:45 +0300)]
luci-base: update Ukrainian translation
luci-base: corrected and update Ukrainian translation with the latest resync.
Signed-off-by: Yurii yuripet@gmail.com
Hannu Nyman [Wed, 19 Sep 2018 20:20:33 +0000 (23:20 +0300)]
Merge pull request #2165 from musashino205/l10n/base-upd-ja
luci-base: update Japanese translation
INAGAKI Hiroshi [Wed, 19 Sep 2018 20:12:50 +0000 (05:12 +0900)]
luci-base: update Japanese translation
Updated Japanese translations.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Hannu Nyman [Wed, 19 Sep 2018 19:24:34 +0000 (22:24 +0300)]
Merge pull request #2164 from Ansuel/ddns_fix
luci-app-ddns: fix overview page
Hannu Nyman [Wed, 19 Sep 2018 18:55:12 +0000 (21:55 +0300)]
i18n: sync translations
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Hannu Nyman [Wed, 19 Sep 2018 18:43:44 +0000 (21:43 +0300)]
build/mkbasepot.sh: Fix i18n after luci-mod-admin-full split
Fix i18n sync scripts by including also the three new modules
luci-mod-{network,status,system} in base.pot.
Note: I did not remove luci.mod-admin-full in case it will ever
get some new contents.
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Jo-Philipp Wich [Wed, 19 Sep 2018 18:05:16 +0000 (20:05 +0200)]
luci-base: switch admin category node to firstnode() action
After this change, luci-base will render the first module or application
page installed on the system, instead of rendering a "Component not found"
message when the status category is unavailable.
This allows for single-purpose LuCI installations like e.g. luci-base with
luci-app-travelmate which only presents application specific views without
any of the standard system pages.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Wed, 19 Sep 2018 17:58:45 +0000 (19:58 +0200)]
luci-base: dispatcher: introduce firstnode() dispatching target
The firstnode target will dispatch the request to the first eligible menu
subtree node that is not a redirect to another node, a special action or
post security enabled page.
That action is specifically useful for global category toplevel nodes like
"admin" which are supposed to simply direct access to the first installed
page node without having to hardcode specific choices.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Daniel F. Dickinson [Fri, 3 Aug 2018 16:36:51 +0000 (12:36 -0400)]
modules: Split luci-mod-full
Move some common elements to luci-base, and otherwise make three
packages out of status, system, and network. They were mostly
separated already, but there were some shared elements between
status and network that are now in luci-base.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Thu, 2 Aug 2018 13:39:48 +0000 (09:39 -0400)]
modules: Make luci-base sufficient to use luci apps
Per the discussion in https://github.com/openwrt/luci/issues/869, make
luci-base sufficient to login, logout, and review and apply or revert
uci changes. This allows most luci-app-xxx to work without having
luci-mod-admin-full installed.
It has been tested with some apps and not luci-mod-admin-full, as well
as with luci-mod-admin-full (to make sure the usual case doesn't break).
Instead of creating a new module namespace (e.g. 'Base') we reduce the
opportunities for breakage by having luci-base take over the 'shell' of
the 'Administration' (admin/....) namespace.
Since admin is assumed by all current building LuCI components (including
Freifunk), this doesn't introduce the 'Administration' tab into any
situation where it would not already be present (but includes it where it
was before).
We also add a "Component not installed" page to avoid fatal errors and
backtrace when e.g. luci-mod-admin-full is not installed.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Ansuel Smith [Wed, 19 Sep 2018 12:00:43 +0000 (14:00 +0200)]
luci-app-ddns: fix overview page
Small fix for wrong display of next update data
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Jo-Philipp Wich [Wed, 19 Sep 2018 09:36:30 +0000 (11:36 +0200)]
Merge pull request #2140 from kristrev/multiple-upstream-interfaces-status
luci-base: Show multiple upstream interface
Kristian Evensen [Sun, 9 Sep 2018 15:27:28 +0000 (17:27 +0200)]
luci-base: Show multiple upstream interface
Several devices have multiple upstream interfaces, for example a fixed
and a mobile broadband connection. Currently, only one upstream
interface is shown per address family in Luci. So in my example, one of
the interfaces would not appear on the Status-page.
This PR introduces support for showing multiple upstream interfaces on
the Status-page. The code is not very complicated. get_status_by_route()
has been extended to return a list of all routes, and
get_wannet()/get_wan6net() now returns all upstream interfaces.
I could not find any other (active) users of these three functions than
calls triggered from the Status-page, so changing the default behavior
should be fine. get_wandev()/get_wan6dev() called get_status_by_route(),
but I could not find any place where those functions were called. I
removed the dev-functions instead of keeping the old
get_status_by_route().
On the status page, the wan/wan6-variables have been replaced with
arrays. When populating the html, we now iterate through these arrays
and create one element for each interface.
I have tested the code with different interface types, v4, v6, as well as
disconnecting and connecting interfaces. The status is updated and the
correct interfaces (or sometimes none at all) are shown.
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Jo-Philipp Wich [Tue, 18 Sep 2018 16:45:19 +0000 (18:45 +0200)]
luci-mod-admin-full: fix diagnostic page glitch
Slightly restructure markup to avoid inconsistent button rendering.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 18 Sep 2018 16:30:22 +0000 (18:30 +0200)]
Merge pull request #1865 from Ansuel/ddns_fixget
luci-app-ddns: various fix
Jo-Philipp Wich [Tue, 18 Sep 2018 16:07:27 +0000 (18:07 +0200)]
Merge pull request #2160 from remakeelectric/app-mosq
luci-app-mosquitto: import new application
Karl Palsson [Tue, 18 Sep 2018 12:47:40 +0000 (12:47 +0000)]
luci-app-mosquitto: import new application
Originally developed and maintained at https://github.com/remakeelectric/owrt_pub_feeds/tree/master/luci-app-mosquitto
Vs the original, this version has been converted to use the luci.mk
style, and has dropped the now obsolete ucitrack entries.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Jo-Philipp Wich [Tue, 18 Sep 2018 15:38:41 +0000 (17:38 +0200)]
Merge pull request #2157 from Ansuel/unbound
luci-app-unbound: add cache_dump tab
Ansuel Smith [Tue, 18 Sep 2018 10:17:19 +0000 (12:17 +0200)]
luci-app-unbound: add cache_dump tab
This adds in the State tab a new option to dump cache from unbound-control application
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Jo-Philipp Wich [Tue, 18 Sep 2018 15:18:23 +0000 (17:18 +0200)]
Merge pull request #2121 from jokdarius/feature/0001-performace-fix
luci-mod-admin-full: performance fix
Jo-Philipp Wich [Tue, 18 Sep 2018 15:15:38 +0000 (17:15 +0200)]
Merge pull request #2159 from TDT-AG/pr/
20180918-luci-theme-material-css-customize
luci-theme-material: make colors configurable
Jo-Philipp Wich [Tue, 18 Sep 2018 15:02:26 +0000 (17:02 +0200)]
Merge pull request #2126 from rosysong/ipv6
luci-proto-ipv6: fix dependency for IPv6
Jo-Philipp Wich [Tue, 18 Sep 2018 15:01:46 +0000 (17:01 +0200)]
Merge pull request #2150 from ameer1234567890/material-theme-monospace-font
luci-theme-material: Monospace font for textarea elements
Florian Eckert [Mon, 3 Sep 2018 08:46:47 +0000 (10:46 +0200)]
luci-theme-material: make colors configurable
The var() css function can be used to insert the value of a custom property.
A custom.css file is added to change the colors. This file will get included
in the cascade.css file.
The following colors could be costomized in the file costom.css.
--header-bg
--header-color
--menu-bg-color
--menu-color
--submenu-bg-hover
--submenu-bg-hover-active
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Dirk Brenken [Mon, 17 Sep 2018 18:36:48 +0000 (20:36 +0200)]
Merge pull request #2154 from dibdot/openvpn-fix
luci-app-openvpn: remove obsolete config options
Dirk Brenken [Sun, 16 Sep 2018 16:58:26 +0000 (18:58 +0200)]
luci-app-openvpn: remove obsolete config options
* remove obsolete config options according to
openwrt/openwrt@
89b8ba9, fix for #2135
* whitespace/intendation fixes
* replace fieldset leftover with div
* fix finally recipe options transfer to regular config with "Add"
Signed-off-by: Dirk Brenken <dev@brenken.org>
Dirk Brenken [Sun, 16 Sep 2018 06:42:21 +0000 (08:42 +0200)]
Merge pull request #2149 from dibdot/openvpn-fix
luci-app-openvpn: fix template based config creation
Dirk Brenken [Sun, 16 Sep 2018 06:41:25 +0000 (08:41 +0200)]
Merge pull request #2152 from EricLuehrsen/unbound-1.8.0
luci-app-unbound: add protocol=ip4_local option support
Eric Luehrsen [Sun, 16 Sep 2018 00:35:26 +0000 (20:35 -0400)]
luci-app-unbound: add protocol=ip4_local option support
Signed-off-by: Eric Luehrsen <ericluehrsen@gmail.com>
Hannu Nyman [Fri, 14 Sep 2018 17:05:36 +0000 (20:05 +0300)]
Merge pull request #2122 from rosysong/backup
Backup: add firmware backup for mtdblock devices
Ameer Dawood [Fri, 14 Sep 2018 07:50:20 +0000 (12:50 +0500)]
luci-theme-material: Monospace font for textarea elements
Signed-off-by: Ameer Dawood <ameer1234567890@gmail.com>
Dirk Brenken [Fri, 14 Sep 2018 06:57:06 +0000 (08:57 +0200)]
luci-app-openvpn: fix template based config creation
* minimal fix to bring back openvpn config creation based on
openvpn_recipes template, fix for #2146
Signed-off-by: Dirk Brenken <dev@brenken.org>
Hannu Nyman [Fri, 14 Sep 2018 06:32:50 +0000 (09:32 +0300)]
Merge pull request #2148 from ysoyipek/patch-5
luci-base: update Turkish translation
Yusuf Soyipek [Thu, 13 Sep 2018 20:17:57 +0000 (23:17 +0300)]
luci-base: update Turkish translation
Add missing translations.
Signed-off-by: Yusuf Soyipek <yusuf@soyipek.com>
Hannu Nyman [Wed, 12 Sep 2018 15:47:48 +0000 (18:47 +0300)]
Merge pull request #2144 from TDT-AG/pr/
20180912-i18n-sync-translations
i18n: sync translations
Martin Schiller [Wed, 12 Sep 2018 09:17:30 +0000 (11:17 +0200)]
i18n: sync translations
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Dirk Brenken [Tue, 11 Sep 2018 08:26:48 +0000 (10:26 +0200)]
Merge pull request #2071 from Andy2244/luci-app-samba4-timemachine
luci-app-samba4: add macOS and Apple Timemachine support
Andy Walsh [Thu, 16 Aug 2018 22:11:10 +0000 (00:11 +0200)]
luci-app-samba4: add macOS compatibility option and Apple Timemachine support
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Dirk Brenken [Sat, 8 Sep 2018 18:23:15 +0000 (20:23 +0200)]
Merge pull request #2136 from aft90/luci-app-adblock-query-box-placeholder
luci-app-adblock: use placeholder in query tool
Dirk Brenken [Sat, 8 Sep 2018 18:21:56 +0000 (20:21 +0200)]
Merge pull request #2137 from musashino205/l10n/adblk-upd-ja
luci-app-adblock: update Japanese translation
INAGAKI Hiroshi [Sat, 8 Sep 2018 17:40:08 +0000 (02:40 +0900)]
luci-app-adblock: update Japanese translation
Updated Japanese translations.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Rosy Song [Sat, 8 Sep 2018 07:07:01 +0000 (15:07 +0800)]
modules: add backup module for mtdblock devices
Signed-off-by: Rosy Song <rosysong@rosinson.com>
Andrei Troie [Fri, 7 Sep 2018 22:56:23 +0000 (23:56 +0100)]
luci-app-adblock: use placeholder in query tool
Use the placeholder property on the textbox in the query tool so it's more convenient.
Signed-off-by: Andrei Troie <andreitroie90@gmail.com>
Hannu Nyman [Fri, 7 Sep 2018 13:35:34 +0000 (16:35 +0300)]
Merge pull request #2131 from tano-systems/firewall-fix-russian-translation
luci-app-firewall: fix and update Russian translation
Anton Kikin [Mon, 3 Sep 2018 23:10:40 +0000 (02:10 +0300)]
luci-app-firewall: fix and update Russian translation
Add missing translations and update existing not quite correct translations.
Removed redundant <br> tags from translations.
Signed-off-by: Anton Kikin <a.kikin@tano-systems.com>
Anton Kikin [Wed, 5 Sep 2018 21:48:53 +0000 (00:48 +0300)]
luci-base: fix a typo in Russian translation
Signed-off-by: Anton Kikin <a.kikin@tano-systems.com>
Dirk Brenken [Tue, 4 Sep 2018 14:49:43 +0000 (16:49 +0200)]
Merge pull request #2110 from stangri/luci-app-https_dns_proxy
luci-app-https_dns_proxy: initial commit
Dirk Brenken [Mon, 3 Sep 2018 14:31:41 +0000 (16:31 +0200)]
Merge pull request #2120 from TDT-AG/pr/
20180830-luci-app-mwan3-fixes
luci-app-mwan3: fixes and improvements
Stan Grishin [Thu, 23 Aug 2018 22:11:49 +0000 (15:11 -0700)]
luci-app-https_dns_proxy: initial commit
Signed-off-by: Stan Grishin <stangri@melmac.net>
Hannu Nyman [Sun, 2 Sep 2018 17:29:25 +0000 (20:29 +0300)]
Merge pull request #2129 from Rixerx/master
luci-base: update Polish translation
Krystian Kozak [Sun, 2 Sep 2018 13:28:59 +0000 (15:28 +0200)]
luci-base: update Polish translation
Updated Polish translations.
Signed-off-by: Krystian Kozak <krystian.kozak20@gmail.com>
Ansuel Smith [Mon, 16 Jul 2018 01:30:43 +0000 (03:30 +0200)]
luci-app-ddns: various fix
Rework overview page, sync with new style and simplify the code by removing unnecessary check.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Hannu Nyman [Sun, 2 Sep 2018 07:54:06 +0000 (10:54 +0300)]
Merge pull request #2127 from tano-systems/update-russian-translation
luci-base: update Russian translation
Dirk Brenken [Sat, 1 Sep 2018 15:10:37 +0000 (17:10 +0200)]
Merge pull request #2125 from dibdot/adblock
luci-app-adblock: sync with adblock 3.5.5
Anton Kikin [Sat, 1 Sep 2018 13:38:36 +0000 (16:38 +0300)]
luci-base: update Russian translation
Add missing translations.
Signed-off-by: Anton Kikin <a.kikin@tano-systems.com>
Rosy Song [Fri, 31 Aug 2018 10:01:24 +0000 (18:01 +0800)]
luci-proto-ipv6: fix dependency for IPv6
Signed-off-by: Rosy Song <rosysong@rosinson.com>
Hannu Nyman [Sat, 1 Sep 2018 07:25:35 +0000 (10:25 +0300)]
Merge pull request #2124 from YuriPet/master
luci-base: update Ukrainian translation
Dirk Brenken [Sat, 1 Sep 2018 06:42:00 +0000 (08:42 +0200)]
luci-app-adblock: sync with adblock 3.5.5
* fix cornercase issues in runtime information/json parsing
Signed-off-by: Dirk Brenken <dev@brenken.org>
Yurii [Fri, 31 Aug 2018 21:16:40 +0000 (00:16 +0300)]
luci-base: update Ukrainian translation
Updated with the latest sync translation.
Signed-off-by: Yurii yuripet@gmail.com
Hannu Nyman [Fri, 31 Aug 2018 19:25:03 +0000 (22:25 +0300)]
Merge pull request #2123 from musashino205/l10n/base-upd-ja
luci-base: update Japanese translation
INAGAKI Hiroshi [Fri, 31 Aug 2018 18:30:34 +0000 (03:30 +0900)]
luci-base: update Japanese translation
Updated Japanese translations.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
INAGAKI Hiroshi [Fri, 31 Aug 2018 17:23:25 +0000 (02:23 +0900)]
i18n: sync translations
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Darius [Fri, 31 Aug 2018 07:54:35 +0000 (10:54 +0300)]
luci-mod-admin-full: performance fix
* uci:get replaced with direct access of value (functions has 3x better performance in that way)
Signed-off-by: Darius Joksas <jok.darius@gmail.com>
Jo-Philipp Wich [Thu, 30 Aug 2018 13:28:19 +0000 (15:28 +0200)]
luci-proto-ppp: align keepalive defaults with current OpenWrt
Disabling LCP echos by *not* setting "option keepalive" was broken in
OpenWrt since https://dev.archive.openwrt.org/ticket/2373.html so setting
"0" in LuCI had the effect of reverting back to "5, 1" while the help
suggested otherwise.
Support for "keepalive 0" was fixed with https://git.openwrt.org/
555c59230
so align LuCI now to emit "option keepalive 0" instead of removing the
option when entering "0" in the gui.
Fixes #2112
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Florian Eckert [Thu, 30 Aug 2018 12:41:06 +0000 (14:41 +0200)]
luci-app-mwan3: translate missing text in diagnostic page
Translate missing text.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Thu, 30 Aug 2018 07:04:48 +0000 (09:04 +0200)]
luci-app-mwan3: diagnostic fix physical device lookup
Use diffrent function to get the physical interface name.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Fri, 13 Jul 2018 12:34:28 +0000 (14:34 +0200)]
luci-app-mwan3: change interface enabled option to use flag cbi class
Make mwan3 interface enable config option use cbi flag.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Florian Eckert [Fri, 22 Jun 2018 06:51:27 +0000 (08:51 +0200)]
luci-app-mwan3: add command to diag_command output view
Add executed command to diagnostic output.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Hannu Nyman [Wed, 29 Aug 2018 13:32:58 +0000 (16:32 +0300)]
Merge pull request #2117 from cshoredaniel/pr-app-nut
luci-app-nut: Add support for NUT configuration
Daniel Dickinson [Sun, 14 Aug 2016 00:35:01 +0000 (20:35 -0400)]
luci-app-nut: Add support for NUT configuration
Adds app to configure NUT (Network UPS Tools), including
nut-server, nut-monitor, and nut-cgi.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Hannu Nyman [Mon, 20 Aug 2018 20:41:20 +0000 (23:41 +0300)]
Merge pull request #2103 from dibdot/force_fix
luci-mod-admin-full: fix forced upgrade
Dirk Brenken [Mon, 20 Aug 2018 19:36:11 +0000 (21:36 +0200)]
luci-mod-admin-full: fix forced upgrade
* fix logical glitch in forced upgrade logic
Signed-off-by: Dirk Brenken <dev@brenken.org>
Dirk Brenken [Mon, 20 Aug 2018 15:11:06 +0000 (17:11 +0200)]
Merge pull request #2095 from ameer1234567890/remove-colons-unbound
luci-app-unbound: Colons removed from input headers
Ameer Dawood [Sun, 19 Aug 2018 08:42:49 +0000 (13:42 +0500)]
luci-app-unbound: Colons removed from input headers
Most OpenWrt applications do not have a colon in input headers.
This has been explained in #1566 as well.
This commit removes the said colons.
Signed-off-by: Ameer Dawood <ameer1234567890@gmail.com>
Dirk Brenken [Fri, 17 Aug 2018 14:11:27 +0000 (16:11 +0200)]
Merge pull request #2075 from dibdot/force_update
luci-mod-admin-full: allow forced upgrade (revised)
Dirk Brenken [Fri, 17 Aug 2018 10:52:36 +0000 (12:52 +0200)]
luci-mod-admin-full: allow forced upgrade (revised)
* allow 'forced' firmware upgrades, even if the image format check
fails. Useful where flashing back to the OEM versions or switching
between ar71xx and ath79 builds
* option is only visible after first/failed image check
* added warning info (see screenshots below)
Signed-off-by: Dirk Brenken <dev@brenken.org>
Jo-Philipp Wich [Fri, 17 Aug 2018 04:58:53 +0000 (06:58 +0200)]
luci-base: remove fake password field from tab order
Set a negative tabindex on the dummy password field to not break the form
tab order flow.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 16 Aug 2018 07:36:37 +0000 (09:36 +0200)]
luci-base: mark password template dummy field as hidden
Mark the dummy input field as aria-hidden, should fix #2063.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Dirk Brenken [Wed, 15 Aug 2018 17:30:10 +0000 (19:30 +0200)]
Merge pull request #2068 from ameer1234567890/patch-1
luci-app-minidlna: Colons removed
Ameer Dawood [Wed, 15 Aug 2018 17:13:59 +0000 (22:13 +0500)]
luci-app-minidlna: Colons removed
Colons have been removed as asked in #1566
Signed-off-by: Ameer Dawood <ameer1234567890@gmail.com>
Hannu Nyman [Wed, 15 Aug 2018 15:41:15 +0000 (18:41 +0300)]
Merge pull request #2066 from hcwhan/master
the 'infinite' error in zh-cn
hcwhan [Wed, 15 Aug 2018 05:43:49 +0000 (13:43 +0800)]
Update base.po
Jo-Philipp Wich [Mon, 13 Aug 2018 13:23:27 +0000 (15:23 +0200)]
Merge pull request #2040 from yangfl/master
luci-app: update Chinese translation
Jo-Philipp Wich [Mon, 13 Aug 2018 13:23:02 +0000 (15:23 +0200)]
Merge pull request #1989 from hanipouspilot/ncm
luci-proto-ncm: suggest both tty and wdm devices
Jo-Philipp Wich [Mon, 13 Aug 2018 13:21:40 +0000 (15:21 +0200)]
Merge pull request #2060 from Ansuel/reboo
luci-mod-admin-full: applyreboot doesn't reload page
Jo-Philipp Wich [Mon, 13 Aug 2018 13:21:01 +0000 (15:21 +0200)]
Merge pull request #2058 from EricLuehrsen/unbound_20180810
luci-app-unbound: add zone-details combined tab
Ansuel Smith [Mon, 13 Aug 2018 08:57:21 +0000 (10:57 +0200)]
luci-mod-admin-full: applyreboot doesn't reload page
The applyreboot page doesn't reload the page onload of the loding gif. This adds the right function.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
projects / oweals / luci.git / log