Remove heartbeats completely

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)

Simplify PKCS#12 PBE algorithm.

Simplify PKCS#12 PBE algorithm by working out Ij + B + 1 directly
instead of using BIGNUMs.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a warning stipulating how things should be coded in ossl_init_base

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1922)

Stop init loops

Under certain circumstances, the libcrypto init code would loop,
causing a deadlock.  This would typically happen if something in
ossl_init_base() caused an OpenSSL error, and the error stack routines
would recurse into the init code before the flag that ossl_init_base()
had been run was checked.

This change makes sure ossl_init_base isn't run once more of the base
is initiated.

Thanks to Dmitry Kostjuchenko for the idea.

Fixes Github issue #1899

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1922)

Configurations/10-main.conf: remove obsolete flag from solaris-x86-gcc.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Configurations/10-main.conf: document GCC for Solaris config constraint.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Allow CA.pl script user to pass extra arguments to openssl command

Useful e.g. to fully script CA commands

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1797)

dsa/dsa_gen: add error message for seed_len < 0

prio openssl 1.1.0 seed_len < q was accepted and the seed argument was
then ignored. Now DSA_generate_parameters_ex() returns an error in such
a case but no error string.

Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1657)

Revert "Fixed deadlock in CRYPTO_THREAD_run_once for Windows"

This reverts commit 349d1cfddcfa33d352240582a3803f2eba39d9a0.

The proposed fix is incorrect. It marks the "run_once" code as having
finished before it has. The intended semantics of run_once is that no
threads should proceed until the code has run exactly once. With this
change the "second" thread will think the run_once code has already been
run and will continue, even though it is still in progress. This could
result in a crash or other incorrect behaviour.

Reviewed-by: Tim Hudson <tjh@openssl.org>

Remove heartbeat support

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1669)

Fixed deadlock in CRYPTO_THREAD_run_once for Windows

Fixed deadlock in CRYPTO_THREAD_run_once() if call to init() is causing
a recursive call to CRYPTO_THREAD_run_once() again that is causing a hot
deadloop inside do { } while (result == ONCE_ININIT); section.

CLA: trivial
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1913)

Solution proposal for issue #1647.

Avoid a memory alignment issue.

Signed-off-by: Matthias Kraft <Matthias.Kraft@softwareag.com>
CLA: trivial
Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1650)

Update s_client and s_server documentation about some missing arguments

Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1837)

Replace the 'SSL' broken link with SSL_CTX_set_security_level which seems not being referenced from elsewhere

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1898)

EVP docs: chacha20, chacha20-poly1305

CLA: trivial

Reviewed-by: Andy Polyakov <appro@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1909)

Update fuzz corpora

New minimal fuzz corpora set

Reviewed-by: Andy Polyakov <appro@openssl.org>
GH: #1910

Cast to an unsigned type before negating

llvm's ubsan reported:
runtime error: negation of -9223372036854775808 cannot be represented in
type 'int64_t' (aka 'long'); cast to an unsigned type to negate this
value to itself

Found using libfuzzer

Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1908

sha/asm/sha512-armv8.pl: add NEON version of SHA256.

This provides up to 30% better performance on some of recent processors.

Reviewed-by: Richard Levitte <levitte@openssl.org>

sha/keccak1600.c: add some optimized implementations.

Reviewed-by: Richard Levitte <levitte@openssl.org>

chacha/asm/chacha-x86.pl: improve [backward] portability.

In order to minimize dependency on assembler version a number of
post-SSE2 instructions are encoded manually. But in order to simplify
the procedure only register operands are considered. Non-register
operands are passed down to assembler. Module in question uses pshufb
with memory operands, and old [GNU] assembler can't handle it.
Fortunately in this case it's possible skip just the problematic
segment without skipping SSSE3 support altogether.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

PPC assembler pack: add some PPC970/G5 performance data.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix typo in util/process_docs.pl

The links weren't properly terminated with a "

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1901)

Fix referenses in section 7 manuals

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

Fix referenses in section 1 manuals

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

Fix referenses in section 3 manuals

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

Add util/check-doc-links.pl, to be used to check referenses in manuals

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1900)

Fix the effect of no-dso in crypto/init.c

When configured no-dso, there are no DSO_{whatever} macros defined.
Therefore, before checking those, you have to check if OPENSSL_NO_DSO
is defined.

Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1902)

Small fixups of util/process_docs.pl

- the pod path hadn't been changed with the directory layout change
- apparently, pod2html doesn't add ".html" at the end of links, making
  them useless, so we need to fix that

With thanks for the report to Michel <michel.sales@free.fr>

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1896)

Fix test_sslcorrupt when using TLSv1.3

The test loops through all the ciphers, attempting to test each one in turn.
However version negotiation happens before cipher selection, so with TLSv1.3
switched on if we use a non-TLSv1.3 compatible cipher suite we get "no
share cipher".

Reviewed-by: Rich Salz <rsalz@openssl.org>

Revert "Move algorithm specific ppccap code from crypto/ppccap.c"

Now that we can link specifically with static libraries, the immediate
need to split ppccap.c (and eventually other *cap.c files) is no more.

This reverts commit e3fb4d3d52e188b83ccb8506aa2f16cb686f4d6c.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Rename the Elliptic Curves extension to supported_groups

This is a skin deep change, which simply renames most places where we talk
about curves in a TLS context to groups. This is because TLS1.3 has renamed
the extension, and it can now include DH groups too. We still only support
curves, but this rename should pave the way for a future extension for DH
groups.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Link internal tests with static OpenSSL libraries when needed

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1889)

Document how to force linking with static libraries

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1889)

Building: make it possible to force linking with static OpenSSL libs

Very simply, support having the .a extension to denote depending on
static libraries.  Note that this is not supported on native Windows
when building shared libraries, as there is not static library then,
just an import library with the same name.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1889)

Fix no-ct in test/ct_test.c

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1890)

descrip.mms.tmpl: Simplify fiddling of logical names record and statem

Instead of enumerating exactly those files in test/ that include
../ssl/ssl_locl.h, assume they all do.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1891)

Update CHANGES and NEWS

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix the no-tls option

Reviewed-by: Richard Levitte <levitte@openssl.org>

Fix no-cms (CVE-2016-7053)

Reviewed-by: Matt Caswell <matt@openssl.org>

test/evptests.txt: add negative tests for AEAD ciphers.

This is done by taking one vector, "corrupting" last bit of the
tag value and verifying that decrypt fails.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

test: add TLS application data corruption test.

Reviewed-by: Emilia Käsper <emilia@openssl.org>

add test for CVE-2016-7053

Reviewed-by: Richard Levitte <levitte@openssl.org>

Don't set choice selector on parse failure.

Don't set choice selector on parse failure: this can pass unexpected
values to the choice callback. Instead free up partial structure
directly.

CVE-2016-7053

Thanks to Tyler Nighswander of ForAllSecure for reporting this issue.

Reviewed-by: Richard Levitte <levitte@openssl.org>

chacha20/poly1305: make sure to clear the buffer at correct position

The offset to the memory to clear was incorrect, causing a heap buffer
overflow.

CVE-2016-7054

Thanks to Robert Święcki for reporting this

Reviewed-by: Rich Salz <rsalz@openssl.org>

aes/asm/aesp8-ppc.pl: improve [backward] portability.

Some of stone-age assembler can't cope with r0 in address. It's actually
sensible thing to do, because r0 is shunted to 0 in address arithmetic
and by refusing r0 assembler effectively makes you understand that.

Reviewed-by: Rich Salz <rsalz@openssl.org>

bn/asm/x86_64-mont.pl: fix for CVE-2016-7055 (Low severity).

Reviewed-by: Rich Salz <rsalz@openssl.org>

test/bntest.c: regression test for CVE-2016-7055.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix the evp_test Ctrl keyword processing

Skip the test if the value after ":" is a disabled algorithm, rather
than failing it

Reviewed-by: Matt Caswell <matt@openssl.org>

Fix no-dso (shlibloadtest)

Reviewed-by: Matt Caswell <matt@openssl.org>

Address some supported_versions review comments

Added some TODOs, refactored a couple of things and added a SSL_IS_TLS13()
macro.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Remove some redundant trace code

No need to have a supported versions table and a versions table. They
should be the same.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix some missing checks for TLS1_3_VERSION_DRAFT

There were a few places where we weren't checking to see if we were using
the draft TLS1.3 version or not.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Give the test with only TLS1.1 and TLS1.0 a better name

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a TODO(TLS1.3) about renegotation

Renegotiation does not exist in TLS1.3, so we need to disable it at some
point.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add some more version tests

Send a TLS1.4 ClientHello with supported_versions and get TLS1.3
Send a TLS1.3 ClientHello without supported_versions and get TLS1.2

Reviewed-by: Rich Salz <rsalz@openssl.org>

A style tweak based on feedback received

Replace a bare ";" with "continue;" for the body of a for loop.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Look at the supported_versions extension even if the server <TLS1.3

If supported_versions is present it takes precedence.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ensure that vent->smeth != NULL before we call vent->smeth()

We can end up with a NULL SSL_METHOD function if a method has been
disabled. If that happens then we shouldn't call vent->smeth().

Reviewed-by: Rich Salz <rsalz@openssl.org>

Address some review feedback comments for supported_versions

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test for the supported_versions extension

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update TLS1.3 draft version numbers for latest draft

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add server side support for supported_versions extension

Reviewed-by: Rich Salz <rsalz@openssl.org>

Ensure that the -trace option can interpret the supported_versions extension

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add the ability to send the supported_versions extension

Reviewed-by: Rich Salz <rsalz@openssl.org>

When no SRP identity is found, no error was reported server side

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1859)

Add main() test methods to reduce test boilerplate.

Simple tests only need to implement register_tests().
Tests that need a custom main() should implement test_main(). This will
be wrapped in a main() that performs common setup/teardown (currently
crypto-mdebug).

Note that for normal development, enable-asan is usually
sufficient for detecting leaks, and more versatile.

enable-crypto-mdebug is stricter as it will also
insist that all static variables be freed. This is useful for debugging
library init/deinit; however, it also means that test_main() must free
everything it allocates.

Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

dtl_mtu_test doesn't follow BIO_* conventions and make Windows build fail

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>

Ensure the key and iv labels are declared as static

Fixes a travis failure

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add a test for the TLS1.3 secret generation

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add support for TLS1.3 secret generation

Nothing is using this yet, it just adds the underlying functions necesary
for generating the TLS1.3 secrets.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add support for initialising WPACKETs from a static buffer

Normally WPACKETs will use a BUF_MEM which can grow as required. Sometimes
though that may be overkill for what is needed - a static buffer may be
sufficient. This adds that capability.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Add some documentation for the new HKDF modes

Reviewed-by: Rich Salz <rsalz@openssl.org>

Following the changes to HKDF to accept a mode, add some tests for this

Reviewed-by: Rich Salz <rsalz@openssl.org>

Update HKDF to support separte Extract and Expand steps

At the moment you can only do an HKDF Extract and Expand in one go. For
TLS1.3 we need to be able to do an Extract first, and the subsequently do
a number of Expand steps on the same PRK.

Reviewed-by: Rich Salz <rsalz@openssl.org>

Simplify and clean X509_VERIFY_PARAM new/free code.

Split x509_verify_param_zero code to the right place

Reviewed-by: Rich Salz <rsalz@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>

Make some CLIENTHELLO_MSG function arguments const

There were a few places where they could be declared const so this commit
does that.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Update a comment

The name and type of the argument to ssl_check_for_safari() has changed.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Swap back to using SSL3_RANDOM_SIZE instead of sizeof(clienthello.random)

The size if fixed by the protocol and won't change even if
sizeof(clienthello.random) does.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Move setting the session_id_len until after we filled the session_id

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Load the sessionid directly in SSLv2 compat ClientHello

Don't use a sub-packet, just load it.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Rename clienthello.version to clienthello.legacy_version

For consistency with the TLSv1.3 spec.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix some minor style issues

Add a blank line, take one away - due to feedback received during review.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Add some function documentation and update some existing comments

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix make update following extensions refactor

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Improve some comment documentation following the extensions refactor

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix various style issues in the extension parsing refactor

Based on review feedback received.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Use an explicit name for the struct for definition of RAW_EXTENSION

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Fix a memory leak in the ClientHello extension parsing

We should be freeing up the raw extension data after we've finished with it.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Handle compression methods correctly with SSLv2 compat ClientHello

In the case of an SSLv2 compat ClientHello we weren't setting up the
compression methods correctly, which could lead to uninit reads or crashes.

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Refactor ClientHello processing so that extensions get parsed earlier

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>

Move algorithm specific ppccap code from crypto/ppccap.c

Having that code in one central object file turned out to cause
trouble when building test/modes_internal_test.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1883)

Unix Makefile: Make sure to use $(PERL) when running ./Configure

For consistency, it's better to use the perl that was specified to
Configure last time it was called.

Use case:

perl v5.8.8 was first along $PATH, perl v5.22.2 was available and
specified as: PERL=/opt/local/bin/perl ./config.  When make wanted to
reconfigure and called './Configure reconf', configuration broke down,
complaining about a perl that's too old.

Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1884)

Missing BN_RECP_CTX field init.

BN_RECP_CTX_new direclty use bn_init to avoid twice memset calls

Reviewed-by: Kurt Roeckx <kurt@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1879)

Zero stack variable with DSA nonce

Thanks to Falko Strenzke for bringing this to our attention.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1882)

Fix zlib BIO_METHOD for latest BIO_METHOD structure changes

Reviewed-by: Richard Levitte <levitte@openssl.org>

INSTALL: small typo

libssl, not libddl.

Reviewed-by: Andy Polyakov <appro@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1871)

Allow null in  X509_CRL_METHOD_free

and fix documentation.

Reviewed-by: Tim Hudson <tjh@openssl.org>
Reviewed-by: Rich Salz <rsalz@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/1634)

Improve PRF documentation

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1834

Improve RSA test coverage.

MD5/SHA1 and MDC-2 have special-case logic beyond the generic DigestInfo
wrapping. Test that each of these works, including hash and length
mismatches (both input and signature). Also add VerifyRecover tests. It
appears 5824cc298174d462c827cd090675e30fc03f0caf added support for
VerifyRecover, but forgot to add the test data.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1474

Make RSA_sign.pod less confusing.

PKCS #1 v2.0 is the name of a document which specifies an algorithm
RSASSA-PKCS1-v1_5, often referred to as "PKCS #1 v1.5" after an earlier
document which specified it. This gets further confusing because the
document PKCS #1 v2.1 specifies two signature algorithms,
RSASSA-PKCS1-v1_5 and RSASSA-PSS. RSA_sign implements RSASSA-PKCS1-v1_5.

Refer to the document using the RFC number which is easier to find
anyway, and refer to the algorithm by its name.

Reviewed-by: Kurt Roeckx <kurt@roeckx.be>
Reviewed-by: Rich Salz <rsalz@openssl.org>
GH: #1474