oweals/openwrt.git
11 years agotoolchain/gcc: add support for 4.8-linaro
Felix Fietkau [Sat, 4 May 2013 13:37:41 +0000 (13:37 +0000)]
toolchain/gcc: add support for 4.8-linaro

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36545

11 years agotoolchain/gcc: forward port missing patches to gcc 4.8.0
Felix Fietkau [Sat, 4 May 2013 13:37:37 +0000 (13:37 +0000)]
toolchain/gcc: forward port missing patches to gcc 4.8.0

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36544

11 years agoramips: unbreak gpio handling for uart mux group
John Crispin [Sat, 4 May 2013 11:36:51 +0000 (11:36 +0000)]
ramips: unbreak gpio handling for uart mux group

this should fix the handling of corner cases

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36543

11 years agoat91: build .dtb file for the CalAmp LMU500 board
Gabor Juhos [Fri, 3 May 2013 19:01:00 +0000 (19:01 +0000)]
at91: build .dtb file for the CalAmp LMU500 board

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36542

11 years agoar71xx: Fix AP135 PCI
Gabor Juhos [Fri, 3 May 2013 19:00:58 +0000 (19:00 +0000)]
ar71xx: Fix AP135 PCI

AP135 has a pluggable PCIE slot unlike AP136.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36541

11 years agokernel: add veth module
Luka Perkov [Fri, 3 May 2013 15:16:50 +0000 (15:16 +0000)]
kernel: add veth module

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36540

11 years agoConfig.in: update options for cgroups and namespaces
Luka Perkov [Fri, 3 May 2013 15:16:49 +0000 (15:16 +0000)]
Config.in: update options for cgroups and namespaces

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36539

11 years agoConfig.in: fix formating
Luka Perkov [Fri, 3 May 2013 15:16:48 +0000 (15:16 +0000)]
Config.in: fix formating

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 36538

11 years agohostapd: enable 802.11r for the -full variant (#13250)
Felix Fietkau [Fri, 3 May 2013 10:39:57 +0000 (10:39 +0000)]
hostapd: enable 802.11r for the -full variant (#13250)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36533

11 years agomac80211: merge a client mode channel switch handling fix
Felix Fietkau [Fri, 3 May 2013 09:14:03 +0000 (09:14 +0000)]
mac80211: merge a client mode channel switch handling fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36531

11 years agoar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce...
Felix Fietkau [Fri, 3 May 2013 09:12:19 +0000 (09:12 +0000)]
ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36530

11 years agokernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by...
Felix Fietkau [Thu, 2 May 2013 15:59:57 +0000 (15:59 +0000)]
kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36529

11 years agobcm63xx: split into two subtargets, generic and SMP
Jonas Gorski [Thu, 2 May 2013 15:28:31 +0000 (15:28 +0000)]
bcm63xx: split into two subtargets, generic and SMP

Make SMP a subtarget, since it only supports BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36527

11 years agobcm63xx: add SMP support for BCM6362 and BCM6368
Jonas Gorski [Thu, 2 May 2013 15:28:26 +0000 (15:28 +0000)]
bcm63xx: add SMP support for BCM6362 and BCM6368

BCM6358 requires further work due to its shared TLB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36526

11 years agokernel: generic: don't strip /proc/irq on SMP
Jonas Gorski [Thu, 2 May 2013 15:28:12 +0000 (15:28 +0000)]
kernel: generic: don't strip /proc/irq on SMP

/proc/irq is needed for changing the SMP affinity of interrupts.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36525

11 years agobcm63xx: fix hsspi flash registration for BCM6362
Jonas Gorski [Thu, 2 May 2013 15:28:10 +0000 (15:28 +0000)]
bcm63xx: fix hsspi flash registration for BCM6362

Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36524

11 years agobcm63xx: fix/enable livebox minipci
Jonas Gorski [Thu, 2 May 2013 15:28:07 +0000 (15:28 +0000)]
bcm63xx: fix/enable livebox minipci

Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
SVN-Revision: 36523

11 years agoscripts/config: fix an option processing error that caused duplication in diffconfig...
Felix Fietkau [Thu, 2 May 2013 14:06:10 +0000 (14:06 +0000)]
scripts/config: fix an option processing error that caused duplication in diffconfig.sh output (#13384)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36522

11 years agofirewall3: update to git head
Jo-Philipp Wich [Thu, 2 May 2013 13:42:20 +0000 (13:42 +0000)]
firewall3: update to git head

- assume "tcp+udp" if no protcol is specified in rules or redirects (#13422, #13386)
- add support for fwmark matches and mark setting targets

SVN-Revision: 36521

11 years agouci: update to git head
Jo-Philipp Wich [Thu, 2 May 2013 12:40:13 +0000 (12:40 +0000)]
uci: update to git head

- copy permission of config files to state files to allow access to state info by non root users
- properly handle empty string case when unsetting lists

SVN-Revision: 36518

11 years agotools/mtools: disable iconv support, it breaks on some systems
Felix Fietkau [Thu, 2 May 2013 12:39:31 +0000 (12:39 +0000)]
tools/mtools: disable iconv support, it breaks on some systems

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36516

11 years agoatheros: remove static gpio_request() from board setup and include generic kmod-gpio...
Jo-Philipp Wich [Thu, 2 May 2013 11:46:53 +0000 (11:46 +0000)]
atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead.

This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/.

SVN-Revision: 36513

11 years agokernel: netfilter.mk: Explicitly set the order of autoloaded modules
Jo-Philipp Wich [Thu, 2 May 2013 11:25:18 +0000 (11:25 +0000)]
kernel: netfilter.mk: Explicitly set the order of autoloaded modules

In my machine, the file is created with arptable_filter before
arp_tables. This can't happen because the former depends on the
latter.

So, instead of rely on wildcards (*.ko), set by hand the files to
be loaded in the correct order.

Signed-off-by: Jonh Wendell <jonh.wendell@oiwifi.com.br>
SVN-Revision: 36512

11 years agotoolchain: add missing patch to gcc v4.8.0
Jo-Philipp Wich [Thu, 2 May 2013 11:25:13 +0000 (11:25 +0000)]
toolchain: add missing patch to gcc v4.8.0

SVN-Revision: 36511

11 years agoFix install of iptables pkg-config files.
Jo-Philipp Wich [Thu, 2 May 2013 08:10:55 +0000 (08:10 +0000)]
Fix install of iptables pkg-config files.

libiptc.pc depends on libip[4|6]tc.pc, thus all of those need to be
installed.
Should fix collectd build and thus #13146; which should make collectd
appear in snapshots again.

Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36509

11 years agokernel: update linux 3.8 to 3.8.11
Gabor Juhos [Wed, 1 May 2013 22:15:18 +0000 (22:15 +0000)]
kernel: update linux 3.8 to 3.8.11

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36507

11 years agobrcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch
Florian Fainelli [Wed, 1 May 2013 21:52:25 +0000 (21:52 +0000)]
brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch

And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36506

11 years agobrcm63xx: add missing binary operands to BCM6345 ethernet patch
Florian Fainelli [Wed, 1 May 2013 21:12:40 +0000 (21:12 +0000)]
brcm63xx: add missing binary operands to BCM6345 ethernet patch

Thanks to Emilio Arias for reporting it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36505

11 years agobrcm63xx: remove 3.7 kernel support
Florian Fainelli [Wed, 1 May 2013 21:12:26 +0000 (21:12 +0000)]
brcm63xx: remove 3.7 kernel support

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 36504

11 years agokernel: add md5sum for 3.9 final
Gabor Juhos [Tue, 30 Apr 2013 11:29:38 +0000 (11:29 +0000)]
kernel: add md5sum for 3.9 final

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36499

11 years agoar71xx: rename WNR2000v3 support patch
Gabor Juhos [Tue, 30 Apr 2013 10:44:11 +0000 (10:44 +0000)]
ar71xx: rename WNR2000v3 support patch

Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36498

11 years agofirmware-utils/mktplinkfw: add description for -W option into usage output
Gabor Juhos [Tue, 30 Apr 2013 10:44:10 +0000 (10:44 +0000)]
firmware-utils/mktplinkfw: add description for -W option into usage output

Add description for -W <hwrev> option into usage output of mktplinkfw.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36497

11 years agox86/geos: switch to 3.8.10
Gabor Juhos [Tue, 30 Apr 2013 10:44:09 +0000 (10:44 +0000)]
x86/geos: switch to 3.8.10

Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36496

11 years agolinux/3.9: implement pcibios_get_phb_of_node for MIPS
Gabor Juhos [Tue, 30 Apr 2013 10:44:08 +0000 (10:44 +0000)]
linux/3.9: implement pcibios_get_phb_of_node for MIPS

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36495

11 years agolinux/3.8: use backported pcibios_get_phb_of_node patches
Gabor Juhos [Tue, 30 Apr 2013 10:44:07 +0000 (10:44 +0000)]
linux/3.8: use backported pcibios_get_phb_of_node patches

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36494

11 years agokernel: update linux 3.8 to 3.8.10
Gabor Juhos [Tue, 30 Apr 2013 10:43:59 +0000 (10:43 +0000)]
kernel: update linux 3.8 to 3.8.10

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36493

11 years agoat91: add missing config symbols
Gabor Juhos [Tue, 30 Apr 2013 10:43:58 +0000 (10:43 +0000)]
at91: add missing config symbols

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36492

11 years agolinux/3.{8,9}: add missing symbols
Gabor Juhos [Tue, 30 Apr 2013 10:43:57 +0000 (10:43 +0000)]
linux/3.{8,9}: add missing symbols

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36491

11 years agolinux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL
Gabor Juhos [Tue, 30 Apr 2013 10:43:56 +0000 (10:43 +0000)]
linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL

It is forced to 'y' since r36342.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36490

11 years agoramips: move dlink profile to correct sub folder - 2nd try
John Crispin [Tue, 30 Apr 2013 10:34:20 +0000 (10:34 +0000)]
ramips: move dlink profile to correct sub folder - 2nd try

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36489

11 years agoramips: move dlink profile to correct sub folder
John Crispin [Tue, 30 Apr 2013 08:24:26 +0000 (08:24 +0000)]
ramips: move dlink profile to correct sub folder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36487

11 years agotoolchain: gcc: backport fixes for gcc bug 54295
Jonas Gorski [Mon, 29 Apr 2013 15:40:21 +0000 (15:40 +0000)]
toolchain: gcc: backport fixes for gcc bug 54295

Fix "Widening multiply-accumulate operation uses wrong value extension"
for 4.7, 4.7-linaro and 4.6-linaro, which backported the broken code to 4.6.
Vanilla 4.6 is unaffected.

Fixes #13420.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36486

11 years agomove packages related to telephony into its own feed
Mirko Vogt [Mon, 29 Apr 2013 02:17:02 +0000 (02:17 +0000)]
move packages related to telephony into its own feed

remove telephony related packages from packages.svn
and add new feed 'telephony.git' to feeds.conf.default

SVN-Revision: 36485

11 years agobroadcom-diag: support for the WNDR3700v3
Hauke Mehrtens [Sun, 28 Apr 2013 21:11:17 +0000 (21:11 +0000)]
broadcom-diag: support for the WNDR3700v3

I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>
SVN-Revision: 36482

11 years agoacx-mac80211: make it compile with recent mac80211 again
Hauke Mehrtens [Sun, 28 Apr 2013 18:53:20 +0000 (18:53 +0000)]
acx-mac80211: make it compile with recent mac80211 again

SVN-Revision: 36481

11 years agobrcm47xx: use kernel 3.8.10 as default kernel
Hauke Mehrtens [Sun, 28 Apr 2013 18:25:16 +0000 (18:25 +0000)]
brcm47xx: use kernel 3.8.10 as default kernel

The biggest change with this kernel is a new partition parser.

SVN-Revision: 36480

11 years agobroadcom-wl: read channel using wlc on detect
Hauke Mehrtens [Sun, 28 Apr 2013 18:21:34 +0000 (18:21 +0000)]
broadcom-wl: read channel using wlc on detect

Hardcoding channel number to 11 is a bad idea, it may be even not
available on some devices. If there are two single-band radios, the
one for 5GHz doesn't have 11 channel.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 36479

11 years agobrcm47xx: add board detection for NETGEAR WNDR4500 V2
Hauke Mehrtens [Sun, 28 Apr 2013 18:19:31 +0000 (18:19 +0000)]
brcm47xx: add board detection for NETGEAR WNDR4500 V2

SVN-Revision: 36478

11 years agomac80211: brcmsmac: remove initial support for core rev 28
Hauke Mehrtens [Sun, 28 Apr 2013 17:59:24 +0000 (17:59 +0000)]
mac80211: brcmsmac: remove initial support for core rev 28

To add support for core rev 28 there are a lot more changes needed.

SVN-Revision: 36477

11 years agomac80211: b43: only use gpio 0 and 1 for the wifi led
Hauke Mehrtens [Sun, 28 Apr 2013 17:57:30 +0000 (17:57 +0000)]
mac80211: b43: only use gpio 0 and 1 for the wifi led

sometimes b43 truned the gpio for the switch reset on.

SVN-Revision: 36476

11 years agokernel: fix a memory leak in split_rootfs_data()
Hauke Mehrtens [Sun, 28 Apr 2013 17:01:56 +0000 (17:01 +0000)]
kernel: fix a memory leak in split_rootfs_data()

allocate_partition() copies all the content of dpart into a new struct.

SVN-Revision: 36475

11 years agomac80211: b43: Handle DMA RX descriptor underrun
Hauke Mehrtens [Sun, 28 Apr 2013 16:55:53 +0000 (16:55 +0000)]
mac80211: b43: Handle DMA RX descriptor underrun

SVN-Revision: 36474

11 years agokernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master...
Hauke Mehrtens [Sun, 28 Apr 2013 16:52:11 +0000 (16:52 +0000)]
kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26.

SVN-Revision: 36473

11 years agoiwinfo: fix iwinfo_hardware() return value if chip id is not found
Jo-Philipp Wich [Sun, 28 Apr 2013 14:04:39 +0000 (14:04 +0000)]
iwinfo: fix iwinfo_hardware() return value if chip id is not found

SVN-Revision: 36471

11 years agokernel: update linux 3.9 patches to rc8
Jonas Gorski [Sun, 28 Apr 2013 11:55:23 +0000 (11:55 +0000)]
kernel: update linux 3.9 patches to rc8

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36469

11 years agokernel: add missing bcma defines and header file for bcrmfmac
Jonas Gorski [Sun, 28 Apr 2013 11:10:42 +0000 (11:10 +0000)]
kernel: add missing bcma defines and header file for bcrmfmac

Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 36468

11 years agoath9k: fix keycache handling with many connected clients
Felix Fietkau [Sat, 27 Apr 2013 09:56:18 +0000 (09:56 +0000)]
ath9k: fix keycache handling with many connected clients

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36467

11 years agomac80211: refresh patch
Felix Fietkau [Sat, 27 Apr 2013 09:56:14 +0000 (09:56 +0000)]
mac80211: refresh patch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36466

11 years agonetifd: update to git head - disables multicast snooping by default on bridges
Jo-Philipp Wich [Sat, 27 Apr 2013 09:28:40 +0000 (09:28 +0000)]
netifd: update to git head - disables multicast snooping by default on bridges

SVN-Revision: 36463

11 years agoar71xx: add user-space support for WNR2000v3
Gabor Juhos [Fri, 26 Apr 2013 17:00:54 +0000 (17:00 +0000)]
ar71xx: add user-space support for WNR2000v3

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36461

11 years agoar71xx: add profile and build image for WNR2000v3
Gabor Juhos [Fri, 26 Apr 2013 17:00:53 +0000 (17:00 +0000)]
ar71xx: add profile and build image for WNR2000v3

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36460

11 years agoar71xx: Add Netgear WNR2000v3 support
Gabor Juhos [Fri, 26 Apr 2013 17:00:52 +0000 (17:00 +0000)]
ar71xx: Add Netgear WNR2000v3 support

Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36459

11 years agoar71xx: add profile and build image for the TL-WR720N v3 board
Gabor Juhos [Fri, 26 Apr 2013 17:00:50 +0000 (17:00 +0000)]
ar71xx: add profile and build image for the TL-WR720N v3 board

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36458

11 years agoar71xx: add user-space support for the TL-WR720N v3 board
Gabor Juhos [Fri, 26 Apr 2013 17:00:49 +0000 (17:00 +0000)]
ar71xx: add user-space support for the TL-WR720N v3 board

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36457

11 years agoar71xx: add kernel support for TPLINK WR720N v3
Gabor Juhos [Fri, 26 Apr 2013 17:00:48 +0000 (17:00 +0000)]
ar71xx: add kernel support for TPLINK WR720N v3

Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36456

11 years agofirmware-utils/mktplinkfw: add support for the TL-WR720N v3 board
Gabor Juhos [Fri, 26 Apr 2013 17:00:47 +0000 (17:00 +0000)]
firmware-utils/mktplinkfw: add support for the TL-WR720N v3 board

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36455

11 years agompc85xx: Add subtargets Generic and P1020
Gabor Juhos [Fri, 26 Apr 2013 16:57:43 +0000 (16:57 +0000)]
mpc85xx: Add subtargets Generic and P1020

Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36454

11 years agokernel: update linux 3.8 to 3.8.9
Gabor Juhos [Fri, 26 Apr 2013 16:55:42 +0000 (16:55 +0000)]
kernel: update linux 3.8 to 3.8.9

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36453

11 years agoat91: upgrade to kernel 3.8.7 and use devicetree
Gabor Juhos [Fri, 26 Apr 2013 16:55:40 +0000 (16:55 +0000)]
at91: upgrade to kernel 3.8.7 and use devicetree

This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36452

11 years agoramips: rt3883: fix build error
Gabor Juhos [Fri, 26 Apr 2013 16:55:28 +0000 (16:55 +0000)]
ramips: rt3883: fix build error

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 36451

11 years agoiwinfo: add hw database file
Jo-Philipp Wich [Fri, 26 Apr 2013 13:21:01 +0000 (13:21 +0000)]
iwinfo: add hw database file

SVN-Revision: 36450

11 years agoiwinfo: move builtin hardware database to /usr/share/libiwinfo/hardware.txt
Jo-Philipp Wich [Fri, 26 Apr 2013 13:20:15 +0000 (13:20 +0000)]
iwinfo: move builtin hardware database to /usr/share/libiwinfo/hardware.txt

SVN-Revision: 36449

11 years agomac80211: update to wireless-testing 2013-04-16 + backports
Felix Fietkau [Fri, 26 Apr 2013 10:52:03 +0000 (10:52 +0000)]
mac80211: update to wireless-testing 2013-04-16 + backports

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 36448

11 years agoprocd: fix wrap around bug in logread time handling code
John Crispin [Thu, 25 Apr 2013 19:51:08 +0000 (19:51 +0000)]
procd: fix wrap around bug in logread time handling code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36447

11 years agohotplug2: make it depend on !PROCD_INIT
John Crispin [Thu, 25 Apr 2013 19:16:54 +0000 (19:16 +0000)]
hotplug2: make it depend on !PROCD_INIT

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36446

11 years agolantiq: make leds and network work on VG3503J
John Crispin [Thu, 25 Apr 2013 19:03:41 +0000 (19:03 +0000)]
lantiq: make leds and network work on VG3503J

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36445

11 years agolantiq: fix board detection helpers
John Crispin [Thu, 25 Apr 2013 19:03:37 +0000 (19:03 +0000)]
lantiq: fix board detection helpers

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36444

11 years agolantiq: move dts files to thir own folder
John Crispin [Thu, 25 Apr 2013 19:03:32 +0000 (19:03 +0000)]
lantiq: move dts files to thir own folder

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36443

11 years agogeneric: fix rtl8366_smi compile warning
John Crispin [Thu, 25 Apr 2013 19:03:29 +0000 (19:03 +0000)]
generic: fix rtl8366_smi compile warning

drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36442

11 years agolantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet
John Crispin [Thu, 25 Apr 2013 19:03:25 +0000 (19:03 +0000)]
lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36441

11 years agolantiq: make lzma-loader based images for VG3503J
John Crispin [Thu, 25 Apr 2013 19:03:21 +0000 (19:03 +0000)]
lantiq: make lzma-loader based images for VG3503J

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36440

11 years agolantiq: update VG3503J.dts to match new partition layout
John Crispin [Thu, 25 Apr 2013 19:03:17 +0000 (19:03 +0000)]
lantiq: update VG3503J.dts to match new partition layout

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36439

11 years agolantiq: add lzma-loader source
John Crispin [Thu, 25 Apr 2013 19:03:13 +0000 (19:03 +0000)]
lantiq: add lzma-loader source

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36438

11 years agoramips: add profile for Dlink DIR-615 H1
John Crispin [Thu, 25 Apr 2013 19:03:09 +0000 (19:03 +0000)]
ramips: add profile for Dlink DIR-615 H1

Hello,
this adds the profile for Dlink DIR-615 H1 without the usb default packages
since this router does not have a usb port and while all the needed definitions
for building are already in target/linux/ramips/image/Makefile this also allows
users to select the exact target in RT305x based boards menuconfig for this router
and compile its firmware.

Signed-off-by: Daniel Petre <dani@ip6.ro>
Patchwork: http://patchwork.openwrt.org/patch/3529/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36437

11 years agoramips: remove now unneeded user-space board detection
John Crispin [Thu, 25 Apr 2013 19:03:05 +0000 (19:03 +0000)]
ramips: remove now unneeded user-space board detection

Now that ALL5002 and ALL5003 each got their own DTS and board names, remove
the now no longer needed user-space part which previously differentiated between
ALL5002 and ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3558/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36436

11 years agoramips: introduce DTS for ALL5003
John Crispin [Thu, 25 Apr 2013 19:03:01 +0000 (19:03 +0000)]
ramips: introduce DTS for ALL5003

Prior to the switch to 3.8, ALL5002 and ALL5003 boards shared mach-all5002.c.
With the change to DTS, this is no longer accurate, as ALL5002 is based on
Rt3352 SoC while ALL5003 is based on Rt5350 SoC, therefore the corresponding
rt5350.dtsi need to be included for ALL5003.

Signed-off-by: Daniel Golle <dgolle@allnet.de>
Patchwork: http://patchwork.openwrt.org/patch/3557/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36435

11 years agoramips: set preinit interface to eth0 by default.
John Crispin [Thu, 25 Apr 2013 19:02:57 +0000 (19:02 +0000)]
ramips: set preinit interface to eth0 by default.

This makes any ramips device accessible via ethernet in failsafe mode.

Based on: https://dev.openwrt.org/changeset/36322

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3567/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36434

11 years agoramips: Add Alpha ASL-26555 support.
John Crispin [Thu, 25 Apr 2013 19:02:53 +0000 (19:02 +0000)]
ramips: Add Alpha ASL-26555 support.

This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36433

11 years agoramips: Add support of D-link DIR-620D1
John Crispin [Thu, 25 Apr 2013 19:02:48 +0000 (19:02 +0000)]
ramips: Add support of D-link DIR-620D1

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>
Acked-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36432

11 years agoramips: sync kernel patches with the mips-next tree
John Crispin [Thu, 25 Apr 2013 19:02:42 +0000 (19:02 +0000)]
ramips: sync kernel patches with the mips-next tree

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36431

11 years agopreinit: move cmdline failsafe= handling ot the generic code
John Crispin [Thu, 25 Apr 2013 19:02:37 +0000 (19:02 +0000)]
preinit: move cmdline failsafe= handling ot the generic code

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36430

11 years agomount_root: prepare base-files
John Crispin [Thu, 25 Apr 2013 19:02:32 +0000 (19:02 +0000)]
mount_root: prepare base-files

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36429

11 years agoboot: make use of kmodloader if it is available
John Crispin [Thu, 25 Apr 2013 19:02:28 +0000 (19:02 +0000)]
boot: make use of kmodloader if it is available

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36428

11 years agoubox: add ubox package
John Crispin [Thu, 25 Apr 2013 19:02:24 +0000 (19:02 +0000)]
ubox: add ubox package

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36427

11 years agoprocd: update to latest git version
John Crispin [Thu, 25 Apr 2013 19:02:20 +0000 (19:02 +0000)]
procd: update to latest git version

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 36426

11 years agonetifd: update to the latest version, fixes interface reload issues when removing...
Felix Fietkau [Thu, 25 Apr 2013 16:28:19 +0000 (16:28 +0000)]
netifd: update to the latest version, fixes interface reload issues when removing the ifname option

SVN-Revision: 36424

11 years ago6relayd: Fix generation of RA-messages
Steven Barth [Wed, 24 Apr 2013 18:22:08 +0000 (18:22 +0000)]
6relayd: Fix generation of RA-messages

SVN-Revision: 36419

11 years agoiwinfo: add SR71-15 radio info, fix nl80211 channel/frequency reporting on some archi...
Jo-Philipp Wich [Wed, 24 Apr 2013 14:44:20 +0000 (14:44 +0000)]
iwinfo: add SR71-15 radio info, fix nl80211 channel/frequency reporting on some architectures

SVN-Revision: 36417

11 years agofirewall3: Make IPv6 ULA-Border generation dynamic
Steven Barth [Wed, 24 Apr 2013 14:17:24 +0000 (14:17 +0000)]
firewall3: Make IPv6 ULA-Border generation dynamic

This fixes working behind another router which gives out ULAs.

SVN-Revision: 36416

11 years agoEnable hidraw support.
Jo-Philipp Wich [Wed, 24 Apr 2013 09:49:09 +0000 (09:49 +0000)]
Enable hidraw support.

It's needed for dealing with certain UART-to-USB adapters built into
e.g. weather stations, and increases the hid module package only
slightly (e.g. on ar71xx: 35k -> 37k).

Signed-off-by: Danny Baumann <dannybaumann@web.de>
SVN-Revision: 36415